empirepaintball.com Covered by one or more of the following U.S. patents: 5,791,325; 5,947,100; 6,109,252; GB

Size: px
Start display at page:

Download "empirepaintball.com Covered by one or more of the following U.S. patents: 5,791,325; 5,947,100; 6,109,252; GB"

Transcription

1 OWNER S MANUAL

2 empirepaintball.com Covered by one or more of the following U.S. patents: 5,791,325; 5,947,100; 6,109,252; GB

3 WARNING: This product does contain chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. WARNING PAINTBALL GUNS AND PAINTBALL GUN ACCESSORIES ARE NOT TOYS Careless use or misuse may result in serious bodily injury or death! Eye protection designed for paintball must be worn by the user and all persons within range. Not for sale to persons under 18 years of age. Must be 18 years of age or older to operate or handle any paintball gun and paintball gun accessories without adult of parental supervision. Read and understand all cautions, warnings, and operating manuals before using any paintball gun or paintball gun accessory. Do not aim paintball gun at eyes or head of people or at animals. Paintball guns are to be used with Paintballs Only. To prevent fire or shock hazard, do not expose unit to rain or moisture. To prevent fire or shock hazard, do not immerse unit in liquids. To prevent fire or shock hazard, do not disassemble any electronic paintball device. The disposal of the battery used to power this product may be regulated in your area. Please conform to all local or state regulations with regard to battery disposal. Use Common Sense and have fun. Any tampering with the unit voids your warranty. There are no consumer serviceable parts inside the unit. The use of non factory authorized components within this product may cause a fire or shock hazard. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY DIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT.

4 1. Introduction General Description Specifications Features 2. Getting Started Battery Installation Attaching the Loader Powering the Loader Loader Operation Advancing Drive Reversing Drive Turning ON/OFF the Loader Rip Drive 3. General Care Emptying the Loader for Storage Cleaning Loader 4. Disassembly Body Disassembly Drive Disassembly 5. Assembling Loader Drive Assembly Body Assembly 6. Diagrams 7. Parts List 8. Troubleshooting Guide Empire Limited Lifetime Warranty Read the full Operator s Manual for technical information, usage instructions, and maintenance tips for your Empire Prophecy Z2 Loader System. The full manual can be found on the CD enclosed with the loader or by contacting Paintball Solutions at or at empirepaintball.com 1. Introduction Congratulations on your purchase of the Empire Prophecy Z2 Paintball Loader. The Z2 loader system continues with the successful Empire Prophecy platform providing the reliability and performance you ve come to expect from Empire Paintball. The backplate buttons and ON/OFF switch has been redesigned for easier operation while wearing gloves. The smaller and sleeker design is simple to operate and is the perfect choice for all levels of players. NO TOOLS REQUIRED! That s right, no tools period. You no longer need any tools to work on your loader, change the battery, disassemble to clean, swap out lids, etc. just utilize the snap and lock technology and you are good to go. Specifications Model- Empire Prophecy Z2 Loader System Weight ounces Standard Power Source- (4) AA alkaline batteries Capacity- approximately 200 balls Features: No tools needed for assembly and disassembly Integrated one piece feed neck for durability Simple ON/OFF Toggle Switch Sound Activated Force Feeding Radio Frequency (RF) upgradeable Low profile and lightweight Infrared Sensors observe the Drive Train to provide automatic ball jam clearance Forward and Reverse push buttons Empire Freeway Antijam to limit jamming Self-aligning shells for easier assembly and disassembly Magnetic Force Easy Load Lid Includes built in Rip Drive System New drive carrier system for more consistent and faster feeding

5 2. Getting Started Battery Installation There are no tools needed to install the batteries into the Empire Prophecy Z2 Loader. Be careful not to pull on the battery wiring harness when removing/installing the battery pack. Remove the body front by pressing in the lower spring lock and the upper tab and then slide the body front forward (Figure 2.1). Fig. 2.1 Attaching the Loader You can attach your Empire Z2 loader to the marker s feed neck or you may need an elbow to attach it properly. The Empire Z2 is designed to fit in standard clamping style feednecks. Place the Empire Z2 into your marker s feed neck, adjust the clamp adjustment screw, and push the clamp closed. If the clamp shows too much resistance when trying to close, loosen the feed neck s adjustment screw. If it s too loose, tighten the feed neck s adjustment screw, until the loader is secure. Notes: You want to hold the loader securely but be careful not to crush or damage the feed neck. Modifying the loaders feed neck will void warranty. Powering the Loader Flip the toggle switch to the left, which is the ON position. The loader will spin until it s filled with paintballs. The loader will have a green flashing LED when on (Figure 2.3). Push in the front tab on the floor and gently lift the front of the floor (Figure 2.2). Remove the battery pack and install batteries into the pack following the polarity markings. Install the battery pack back into the backbone; lock the pack into place by pushing the front tab arm in and lowering the floor. Then reinstall the body front by sliding it back on. Fig. 2.2 Notes: For best results, only use quality brand batteries. When replacing batteries, used batteries should be recycled. Make sure the batteries are installed correctly, pay attention to the (+/-) polarity markings. Fig. 2.3 Loader Operation The Z2 loader is activated by sound and sensors. Turn the Z2 to the ON position and you re ready to go. The Z2 will pickup the sound of each shot and use its sensors to load your marker. No programming adjustments are needed. Advancing Drive You can advance drive by pressing the Forward button on the backplate (Figure 2.3). Each time the button is pressed, the drive will spin until it senses the ball stack is full or it times out. This is useful after you refill your loader to make sure the ball stack is full.

6 2. Getting Started Continued... Reversing Drive You can reverse the drive by pressing the Reverse button on the backplate (Figure 2.3). Each time the button is pressed, the drive will spin in reverse and then run forward again until the ball reaches the marker breach. This is useful to clear a ball jam. Turning ON/OFF the Loader Flip the toggle switch to the right, which is the OFF position; the loader is now OFF. If the loader is left on, it will shut off after 1 hour of inactivity. Rip Drive The Rip Drive is the thumbwheel located under the Empire Z2 Loader. It has several uses: Manually load up to 13 paintballs into your paintball marker for every revolution of the thumbwheel. This can be done to chronograph your gun without the need to turn on the hopper, or to feed paintballs if your batteries should happen to die during a game. Clear a ball jam in your loader during a game by rotating the rip drive counter clockwise, then forwards again to pre-load the ball stack. Cleaning Loader To clean the loader, use a clean dry cloth, or apply a small amount of water or goggle lens cleaner to a clean cloth. Apply only enough water or cleaner to dampen the cloth. Do not apply goggle lens cleaner directly to loader surfaces, as too much contact may deteriorate the plastic. If any paintballs break inside the hopper, DO NOT use any Liquids or Chemicals to rinse out the hopper, doing so may cause severe damage to the loader electronics and void the warranty. In most cases you will be able to clean the drive area of the loader by just removing the body front and wiping it out using a damp towel. If it is necessary to further clean the loader, follow the disassembly instructions. 4. Disassembly Body Disassembly The body of the Empire Z2 Loader can be disassembled with no tools. Changing batteries and basic cleaning can be performed by removing only the body front. It is recommended you do not remove the body sides unless you need to access the drive assembly. 3. General Care Emptying the Loader for Storage With the loader turned OFF, turn it upside down to dump the paintballs out. While upside down, rotate the Rip Drive counter clockwise to release the paintballs. Do not store your Empire Z2 loader with any paintballs remaining inside. When storing the loader for an extended period of time, disconnect the battery cap from the battery pack completely. Store in a dry place where it will not come in contact with the loader itself or any metal parts. empirepaintball.com Front Body- Press in the lower spring lock and the upper tab, and then slide the front body forward and off the drive assembly (Figure 3.1). Fig. 3.1

7 Backplate Cover- Press in the tab located on the bottom of the backplate cover and tilt the bottom of the cover up and away from the body. Once the bottom of the cover is away from the body, slightly lower the cover to release the upper locking tab and then remove (Figure 3.2). Body Sides- Press in each of the two spring locks located on the bottom of each body side and remove them from the drive assembly (Figure 3.4). Fig. 3.4 Fig. 3.2 Lid and Lid Spring- The lid can be removed once the front body has been removed. Slightly separate the two body sides enough to slip the lid out of the left and right slots. It only needs to be separated by a 1/4 inch to remove the lid. The body sides do not have to be removed from the drive assembly to remove the lid (Figure 3.3). Drive Disassembly- The drive assembly should only be taken apart for cleaning or repair. Remove the shell assembly first and follow the instructions below if it is necessary to work on the drive assembly. Floor- Push in the front backbone arm and lift the front of the floor from the drive assembly, then push in both rear backbone arms with your thumb and fore-finger at the same time and lift floor from the drive assembly. Fig. 3.3 Outlet Cover- Locate the alignment tab on the right side of the outlet cover and gently pull it up and out of the slide. It might be necessary to tilt the outlet cover toward the motor to remove it as part of it locks under the motor (Figure 3.5). Fig. 3.5

8 4. Disassembly Continued... Drive Carrier The Drive Carrier is removed by removing the E-ring located on the top of the drive shaft. If necessary, use a small flat head screwdriver and gently pry the E-ring off, then lift the carrier off (Figure 4.1). Fig. 4.1 Rip Drive The Rip Drive is removed by removing the E-Ring located on the bottom of the drive shaft and pulling the Rip Drive off. If necessary, use a flat head screwdriver to help lift the Rip Drive off the drive shaft (Figure 4.2). Fig. 4.2 empirepaintball.com Separating the Slide from the Backbone The slide is held to the backbone by three locking tabs (fig 4.3), located on the top of the slide. If neccessary, use a flat head screwdriver or coin gently pull the tabs one at a time toward the center of the slide until all three are released. Once all three locking tabs have been released the slide will lift off the backbone. It will also be necessary to unplug the motor harness from the circuit board (Figure 4.3). Note: When separating the slide from the backbone, the pulley, pulley pin and belt will be loose. Be careful not to lose any of these parts. Fig. 4.3 Spring Locks and Springs The spring locks and lock springs should not be removed unless the springs or locks need replacing. The spring locks are removed by removing the spring first and then sliding the lock out. Circuit Board The circuit board can only be removed once the slide has been separated from the backbone. Gently flex the backbone arm that is closest to the board, to the right and lift the board off the front alignment post. While holding the backbone arm away from the board, rotate the board to the right to clear the slide locking tab. The board can now be removed from the backbone

9 5. Assembling Loader Drive Assembly If the Drive Assembly is not assembled correctly the Empire Z2 Loader will not function properly. It is recommended that you do not take the drive apart unless necessary. Installing Circuit Board Line up the rear post on the backbone with the rear hole on the board and gently lower the board onto the post (Figure 5.1). Next lower the board onto the front post on the backbone. It may be necessary to bend the right side backbone arm out slightly, so the board can seat correctly on the post (Figure 5.1). Fig. 5.1 Installing the Sprocket to the Drive Shaft Slide the sprocket onto the drive shaft with the sprockets flat side facing the E-Ring slot. Put the E-Ring onto the drive shaft to hold the sprocket in place (Figure 5.2). The side of the sprocket with the pad print should face toward the circuit board (Figure 5.3). Fig. 5.2 Installing the Lower Drive Components Place the lower drive bearing into the bottom of the slide. Insert the drive shaft with sprocket attached into the slide. Make sure the pad printed side of the sprocket faces toward the circuit board. Place the pulley pin into the slide and slide the pulley onto it. Install motor into the slide. Put the drive belt onto the pulley and then stretch it onto the motor pulley (Figure 5.3). Fig. 5.3

10 5. Assembly Continued... Installing the Slide to the Backbone Make sure the bearing is installed in the backbone. Place the backbone with bearing facing the slide, onto the drive shaft and position the slides feed neck toward the backbones feed hole. Next you will have to lock the three backbone tabs onto the slide. Push the tabs into the backbone one at a time. It may be necessary to flip the drive assembly over while holding it together and use a coin or flat head screwdriver to lock in the final tab (Figure 5.4). Installing Drive Carrier Place the drive carrier onto the drive shaft and install the E-Ring on to the drive shaft to hold the drive carrier in position. If neccessary use a flat head screw driver or coin to push the E-Ring onto the drive shaft. Installing Outlet Cover On the left side of the outlet cover you will notice two protruding parts. The one toward the front of the cover goes under the motor, and the other one goes into the feed area. Make sure these two parts of the cover are located properly before pushing the cover down into the right side alignment tab (fig 5.5). Fig. 5.5 Fig. 5.4 Check that the pulley pin is seated in both the slide and backbone. If necessary gently push the pin using a small flat head screwdriver, so it correctly seats in both parts. Also check that the belt is properly positioned on the motor and pulley. Installing Rip Drive Place the Rip Drive wheel on the bottom of the drive shaft and push it down until it stops. Install the E-Ring into the slot on the bottom of the drive shaft using a flat head screw driver or coin. empirepaintball.com Installing Floor- Place the floor over the backbone assembly, line up the center of the floor over the motor area of the slide. Flex in the backbone arms and lock them into the floor, one at a time, starting with the one on the left side, nearest to the motor. Check that the floor, outlet cover and slide fit flush with no gaps. Also check from the right side of the drive assembly that the outlet cover sits flush with the slide (Figure 5.6). Fig. 5.6 Testing Drive Assembly Once the drive assembly is back together, rotate the rip drive wheel to check that it is rotating correctly. There should be some resistance from the belt but the drive shaft should rotate smoothly.

11 Body Assembly Assemble the body in the order listed below. The drive assembly must be completely assembled before assembling the body. Backplate- Put the top of the rear cover into the slot on the body, then gently rotate the cover down and lock the bottom tab into the body. Be careful not to damage the rear buttons on the circuit board. Body Sides Install the left rear side shell first; making sure the tongue on the inside of the shell is between the slide and backbone and slide it toward the center of the loader, locking the shell in place by the spring lock. Body Front- Slide the body front onto the drive assembly and push it until the upper tab and lower spring lock are in place. Be careful of the alignment and Do Not force it into place. Next, attach the right side rear shell to the drive assembly. Insert the tongue on the inside of the shell between the slide and backbone and slide it toward the center of the loader, locking the shell in place by the spring lock. Make sure the alignment posts are lined up, the tongue and groove of the body sides are interlocked, and that both lower spring tabs are locked into the body sides. Lid with Spring- You will notice one side of the spring is longer than the other. Install the spring onto the longer lid pivot arm (left side) and with the longer part of the spring toward the center of the lid (Figure 5.7). With the lid in the fully open position, insert the pivot arm with spring into the left side of the body. Align the right side of the body with the pivot arm, bring the two sides of the body together, and close the lid. Check that the body is aligned and that the lid opens and closes correctly. Fig. 5.7

12 6. Diagrams

13 6. Diagrams 7. Parts List REF # DESCRIPTION SKU # not shown Battery Holder Empire Bubble Sticker Bearing (R188) E-Ring (1/4 x.025 Thk) Pulley Dowel Pin (0.78 Dia x.500) Pulley Belt Spring Lock Front Spring Lock Back Lock Spring Rip Drive 2 Wheel Motor with Harness Lid Spring Drive Shaft Drive Carrier Body Front Left Body Side Right Body Side Rear Cover (with decal) Lid Circuit Board Slide Slide Window Floor Outlet Cover Back Bone Sprocket

14 8. Troubleshooting Guide Loader will not turn Batteries are low on Check the voltage of the batteries and on power or installed incorrectly make sure they follow the polarity markings on the battery pack Circuit board is not plugged Remove the floor and check the connection in correctly connection between the board and wiring harness Broken Wire Check wiring connections for damage Loader is not feeding Outlet cover installed Check that the outlet cover is sitting incorrectly. in the slide correctly. Look in the feed neck and drive area to check alignment Batteries are low on power Replace batteries Loader is feeding Batteries are low Check the voltage of the batteries with a inconsistently multimeter Drive Belt is wet or worn Check drive belt condition, replace if necessary Spring locks are not Drive assembly is not The drive assembly has to sit into the locking into body sitting in body correctly lower groove on the inside of the rear body sides Rear body sides are not lined up Check if the tongue and groove of the rear body shells are interlocked Lid is not staying Lid spring not installed or Check that lid spring is installed correctly. open installed correctly Balls are jamming Outlet cover is worn Replace outlet cover

15 LIMITED LIFETIME WARRANTY INFORMATION (ORIGINAL PURCHASE RECEIPT REQUIRED) KEE Action Sports ( KEE ) warrants that this product is free from defects in materials and workmanship for as long as it is owned by the original purchaser, subject to the terms and conditions set forth below. KEE Action Sports will repair or replace with the same or equivalent model, without charge, any of its products that have failed in normal use because of a defect in material or workmanship. KEE Action Sports is dedicated to providing you with products of the highest quality and the industry s best product support available for satisfactory play. Purchaser must register product to activate warranty.. Register your product either: 1. Online at 2. Complete the product registration card (if applicable) and mail along with a copy of your receipt to Paintball Solutions, Lime Kiln Rd., Neosho, MO WHAT THIS WARRANTY DOES NOT COVER This warranty does not cover problems resulting from abuse, the unauthorized modification or alteration of our product, problems resulting from the addition of aftermarket products and scratches or minor superficial imperfections. Due to the nature of paintball products it is important that the product be maintained by the user as indicated in the product manual to remain in good operating condition. Your Limited Warranty will be void if you fail to maintain the product as recommended in the product instruction manual. In addition, certain parts of a product may be subject to wear through regular usage. Replacement and repair of such parts is the responsibility of the user throughout the life of the product. These parts are not covered under the Limited Warranty. Examples of this type of part include (but are not limited to) goggle lens, straps, o-ring seals, cup seals, springs, ball détentes, batteries, hoses, drive belts, gears and any part of a product subject to continuous impact from paintballs. Hydrotesting of air cylinders is not covered under this warranty. THE LIMITED WARRANTY ALSO DOES NOT COVER INCIDENTAL OR CONSEQUENTIAL DAMAGES THIS WARRANTY IS THE SOLE WRITTEN WARRANTY ON KEE S PRODUCT AND LIMITS ANY IMPLIED WARRANTY TO THE PERIOD THAT THE PRODUCT IS OWNED BY THE ORIGINAL PURCHASER. SOME STATES, PROVINCES AND NATIONS DO NOT ALLOW THE LIMITATION OF IMPLIED WARRANTIES OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE, PROVINCE TO PROVINCE, NATION TO NATION. If you should encounter any problems with your product and you have added aftermarket parts on your product, please test it with the original stock parts before sending it in. Always unload and remove air supply before shipping markers. Do not ship your air supply tank if it is not completely empty. Shipping a pressurized air supply tank is unsafe and unlawful. Remove all batteries from products prior to shipping. This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion of incidental or consequential damages. HOW TO CLAIM YOUR LIMITED WARRANTY: 1. Prior to shipping your product for warranty service, call or KEE Customer Service at or tech@paintballsolutions.com and request a return authorization number and shipping address. To ensure your package is accepted and properly processed, the return authorization number must be clearly visible on the outside of the package. 2. All products returned for warranty service must include a copy of the original purchase receipt and a letter clearly listing the return authorization number, your complete name, address, phone number and address and a description of the problem. 3. Products returned for warranty service should be sent only by delivery services that provide tracking services. KEE is not responsible for replacement of any products lost in transit. 4.Be sure to include return address information. If you do not include return shipment instructions, the ownership of the product is determined to be surrendered and the product will be disposed of at the discretion of KEE. REPAIRS NOT COVERED BY WARRANTY KEE Action Sports Authorized Service Centers will gladly perform repairs not covered by this Limited Warranty for a nominal charge to cover parts and labor. Repairs made by Service Centers will usually be faster and less expensive than those sent back to the factory. How to return your product for service not covered by this Limited Warranty: 1. Prior to shipping your product for service not covered by this Limited Warranty, call or KEE Customer Service at or tech@paintballsolutions.com and request a return authorization number and shipping address. To ensure your package is accepted and properly processed, the return authorization number must be clearly visible on the outside of the package. 2. All products returned for service not covered by this Limited Warranty must include a copy of the original pur chase receipt and a letter clearly listing the return authorization number, your complete name, address, phone number and address and a description of the problem. 3. Products returned for service not covered by this Limited Warranty should be sent only by delivery services that provide tracking services. KEE is not responsible for replacement of any products lost in transit. 4. Any product returned to KEE for repairs not covered by this Limited Warranty must be shipped postage paid and include the repair fee. Please call or KEE Customer Service for current repair fees. KEE will repair or replace the product with a reconditioned unit of the same or equivalent model. If you ship your product without enclosing payment of the repair fee payment, KEE will bill you for the repair fee plus a $5.00 handling fee. Upon receipt of repair and handling fees payment, the product or its replacement will be shipped to you. If you do not include return shipment instructions or fail to submit your payment for repairs within 60 days of billing, the ownership of the product is determined to be surrendered and the product will be disposed of at the discretion of KEE. For repairs not covered by this Limited Warranty contact Paintball Solutions for repair pricing. This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion of incidental or consequential damages. For Warranty parts, service, information or manuals in other languages, (where applicable) go to: Paintball Solutions: tech@paintballsolutions.com Telephone: Lime Kiln Rd., Neosho, MO empirepaintball.com

Thank you for purchasing your new Empire Reloader B Sound-Activated 3-Speed Paintball Hopper!

Thank you for purchasing your new Empire Reloader B Sound-Activated 3-Speed Paintball Hopper! Thank you for purchasing your new Empire Reloader B Sound-Activated 3-Speed Paintball Hopper! Should you require any technical assistance on the use of this product, or if your product needs servicing,

More information

BT_SA-17_Manual.qxp 3/11/10 9:54 AM Page C

BT_SA-17_Manual.qxp 3/11/10 9:54 AM Page C BT_SA-17_Manual.qxp 3/11/10 9:54 AM Page C OWNER S MANUAL BT_SA-17_Manual.qxp 3/11/10 9:54 AM Page D CONTENTS 1. Rules for Safe Marker Handling..............................1 2. Introduction and Specifications..............................1

More information

BT PAINTBALL DESIGNS, INC. 570 MANTUA BLVD., SEWELL, NJ

BT PAINTBALL DESIGNS, INC. 570 MANTUA BLVD., SEWELL, NJ Rip Clip Manual_2.qxp 4/15/08 11:00 AM Page a BT PAINTBALL DESIGNS, INC. 570 MANTUA BLVD., SEWELL, NJ 08080 WWW.BTPAINTBALL.COM Rip Clip Manual_2.qxp 4/15/08 11:00 AM Page b BT Paintball would like to

More information

Rip Clip Manual_2.qxp 4/15/08 11:00 AM Page c

Rip Clip Manual_2.qxp 4/15/08 11:00 AM Page c Rip Clip Manual_2.qxp 4/15/08 11:00 AM Page b Rip Clip Manual_2.qxp 4/15/08 11:00 AM Page c Rip Clip Manual_2.qxp 4/15/08 11:00 AM Page 1 BT Paintball would like to thank you for your purchase of the BT

More information

www.empirepaintball.com 1. SAFE MARKER HANDLING IMPORTANT: Never carry your marker uncased when not on a playing field. The non-playing public and law enforcement personnel may not be able to distinguish

More information

TABLE OF CONTENT IMPORTANT HPA AIR TANK SAFETY INSTRUCTIONS AND GUIDELINES RYSE ON/OFF ASA GETTING STARTED O-RING LIST SCREW LIST MICRO SQ BOARD

TABLE OF CONTENT IMPORTANT HPA AIR TANK SAFETY INSTRUCTIONS AND GUIDELINES RYSE ON/OFF ASA GETTING STARTED O-RING LIST SCREW LIST MICRO SQ BOARD TABLE OF CONTENT 4 IMPORTANT HPA AIR TANK SAFETY INSTRUCTIONS AND GUIDELINES 22 RYSE ON/OFF ASA 6 GETTING STARTED 23 O-RING LIST 8 MICRO SQ BOARD 25 SCREW LIST 6 TRIGGER ADJUSTMENT 28 INTERNAL PARTS 7

More information

OWNER S MANUAL

OWNER S MANUAL OWNER S MANUAL WWW.EMPIREBATTLETESTED.COM CONTENTS 1. RULES FOR SAFE MARKER HANDLING 1 2. INTRODUCTION AND SPECIFICATIONS 1 3. GETTING STARTED 1 4. FIRING YOUR MARKER 3 5. VELOCITY ADJUSTMENT 3 6. ACCESSORY

More information

Not a toy. Adult supervision required. Misuse or careless use may cause serious injury or death. May be dangerous up to 500 yards (457 meters).

Not a toy. Adult supervision required. Misuse or careless use may cause serious injury or death. May be dangerous up to 500 yards (457 meters). Owner s manual www.umarex-usa.com CO2 repeater rifle cal..177 (4.5mm) pellet cal..22 (5.5mm) pellet Not a toy. Adult supervision required. Misuse or careless use may cause serious injury or death. May

More information

WARNING TABLE OF CONTENTS:

WARNING TABLE OF CONTENTS: WARNING WARNING: This is not a toy. Misuse may cause serious injury or death. Eye protection designed specifically for paintball must be worn by the user and persons within range. Recommend 18 years of

More information

Synergy Owners Manual

Synergy Owners Manual Synergy Owners Manual Table of Contents Safety Guidelines...2 Quickstart Guide...3 Owners Manual...7 Field Strip Guide...11 Do s & Don ts...12 Diagrams...13 Troubleshooting Guide...15 Warranty Info...16

More information

IMPORTANT CO2/ HPA AIR TANK SAFETY INSTRUCTION AND GUIDELINES. Tank valves must be installed or removed by qualified personnel.

IMPORTANT CO2/ HPA AIR TANK SAFETY INSTRUCTION AND GUIDELINES. Tank valves must be installed or removed by qualified personnel. !WARNING! IMPORTANT SAFETY INSTRUCTION AND GUIDELINS!WARNING! IMPORTANT CO2/ HPA AIR TANK SAFETY INSTRUCTION AND GUIDELINES GETTING STARTED This Paintball Marker is NOT A TOY. Misuse can cause serious

More information

HAS2400 Hepa Air Scrubber

HAS2400 Hepa Air Scrubber HAS2400 Hepa Air Scrubber Diamonds Products 15 SW 40th Ave Great Bend, KS 67530 USA Toll Free: (866) 539-1694 Local: (620) 792-4542 Purchase Date: Serial Number: Purchased From: The DIAMOND HAS2400 HEPA

More information

IMPORTANT CO2/ HPA AIR TANK SAFETY INSTRUCTION AND GUIDELINES. Tank valves must be installed or removed by qualified personnel.

IMPORTANT CO2/ HPA AIR TANK SAFETY INSTRUCTION AND GUIDELINES. Tank valves must be installed or removed by qualified personnel. !WARNING! IMPORTANT SAFETY INSTRUCTION AND GUIDELINS!WARNING! IMPORTANT CO2/ HPA AIR TANK SAFETY INSTRUCTION AND GUIDELINES GETTING STARTED This Paintball Marker is NOT A TOY. Misuse can cause serious

More information

IMPORTANT CO2/ HPA AIR TANK SAFETY INSTRUCTION AND GUIDELINES. Tank valves must be installed or removed by qualified personnel.

IMPORTANT CO2/ HPA AIR TANK SAFETY INSTRUCTION AND GUIDELINES. Tank valves must be installed or removed by qualified personnel. !WARNING! IMPORTANT SAFETY INSTRUCTION AND GUIDELINS!WARNING! IMPORTANT CO2/ HPA AIR TANK SAFETY INSTRUCTION AND GUIDELINES GETTING STARTED This Paintball Marker is NOT A TOY. Misuse can cause serious

More information

ARIAKON. Thank you for choosing ARIAKON. ARE YOU A PLAYER?

ARIAKON. Thank you for choosing ARIAKON. ARE YOU A PLAYER? Page 20 Page 1 Thank you for choosing ARIAKON. ARIAKON www.ariakon.com 2794 LOKER AVE WEST SUITE 107 CARLSBAD CA 92008 Phone: 1-877-4-ARIAKON 760-268-0735 FAX: 760-268-0736 Email: sales@ariakon.com ARE

More information

! WARNING! IMPORTANT HPA AIR TANK SAFETY INSTRUCTION AND GUIDELINES ! WARNING! IMPORTANT SAFETY INSTRUCTION AND GUIDELINES

! WARNING! IMPORTANT HPA AIR TANK SAFETY INSTRUCTION AND GUIDELINES ! WARNING! IMPORTANT SAFETY INSTRUCTION AND GUIDELINES ! WARNING! IMPORTANT SAFETY INSTRUCTION AND GUIDELINES! WARNING! IMPORTANT HPA AIR TANK SAFETY INSTRUCTION AND GUIDELINES This Paintball Marker is NOT A TOY. Misuse can cause serious injury or death. It

More information

TABLE OF CONTENTS. AIR SOURCE : CO2/HPA ONLY (not included)

TABLE OF CONTENTS. AIR SOURCE : CO2/HPA ONLY (not included) Owner s Manual INCLUDES -.68 CALIBER CONQU3ST PAINTBALL MARKER - 10.5 ONE PIECE BARREL (AUTOCOCKER THREAD) - SPARE PARTS KIT - TOOL KIT - BARREL BLOCKING DEVICE AIR SOURCE : CO2/HPA ONLY (not included)

More information

HUBEN K1 Pre-charged Pneumatic Air Rifle Owner s Manual

HUBEN K1 Pre-charged Pneumatic Air Rifle Owner s Manual HUBEN K1 Pre-charged Pneumatic Air Rifle Owner s Manual 5135 Naiman Parkway, Cleveland, OH 44139 l 216-220-1180 Record the serial number of your airgun... READ THIS MANUAL AND THE WARNINGS AND SAFETY PROCEDURES

More information

Beeman Precision Airguns Spring-Piston Air Rifles P1, P3, P11

Beeman Precision Airguns Spring-Piston Air Rifles P1, P3, P11 Beeman Precision Airguns Spring-Piston Air Rifles P1, P3, P11 User Instruction Manual V1 10/17 CONTENTS Rules of safe shooting...3 Cocking & Loading... 4 Safety... 4 Sight Adjustment...5 Trigger Adjustment...5

More information

Underwater Housing for Panasonic Lumix DMC-ZS60, DMC-TZ80

Underwater Housing for Panasonic Lumix DMC-ZS60, DMC-TZ80 Underwater Housing for Panasonic Lumix DMC-ZS60, DMC-TZ80 Product Number 6170.60 Product Registration Please register your product at ikelite.com within 15 days of purchase. Our product registration database

More information

WARNING. Paintball Pistol. Paintball Pistol

WARNING. Paintball Pistol. Paintball Pistol This lightweight assault paintball pistol is custom milled from high grade aluminum for superb balance and precision. The compact construction of this competition paintball pistol will give you a mobile

More information

MODEL 1410 OWNER S MANUAL

MODEL 1410 OWNER S MANUAL 2111 S. 8th, Rogers, Ar 72758 U.S.A. (501) 636-1200 Fax (501)636-0573 http://www.brasseagle.com THIS BOOKLET CONTAINS: Safety Information Warranty Registration Annotated Diagram Operating Instructions

More information

Cover.qxd 1/10/05 10:30 AM Page 2. user manual. diablopaintball.com

Cover.qxd 1/10/05 10:30 AM Page 2. user manual. diablopaintball.com Cover.qxd 1/10/05 10:30 AM Page 2 user manual Cover.qxd 1/10/05 10:30 AM Page 3 Table Of Contents: Page Topic(s) 1 Warning and Rules Safe Marker Handling 2 Warranty Information 3 Welcome 4 Battery Installation

More information

SPECIFICATIONS Type: Twin stack, single phase Tank: 4 gallon Air Output: PSI; PSI Max PSI: 125 PSI HP: 1.

SPECIFICATIONS Type: Twin stack, single phase Tank: 4 gallon Air Output: PSI; PSI Max PSI: 125 PSI HP: 1. 2 GALLON TWIN STACK AIR COMPRESSOR Model: 9526 DO NOT RETURN TO STORE. Please CALL 800-348-5004 for parts and service. CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or

More information

BUILT TO WIN PAINTBALL LOADER SPIRE III MANUAL

BUILT TO WIN PAINTBALL LOADER SPIRE III MANUAL BUILT TO WIN PAINTBALL LOADER SPIRE III MANUAL SPIRE III SETUP Thank you for purchasing the Virtue Spire III paintball loader. This manual covers all aspects of your Spire III loader. It is recommended

More information

IZH 53M air pistol owner s manual

IZH 53M air pistol owner s manual IZH 53M air pistol owner s manual 18370 S. Miles Rd Warrensville Heights, OH 44128 216-220-1180 Record the serial number of your airgun... BASIC SAFETY RULES 1. Never point your airgun at anyone or allow

More information

Underwater Housing for Canon G7X Mark II

Underwater Housing for Canon G7X Mark II Underwater Housing for Canon G7X Mark II Product Number 6146.08 Product Registration Please register your product at ikelite.com within 15 days of purchase. Our product registration database is the best

More information

OPERATING and MAINTENANCE INSTRUCTIONS MAXIS 6K Puller (M6K-M)

OPERATING and MAINTENANCE INSTRUCTIONS MAXIS 6K Puller (M6K-M) OPERATING and MAINTENANCE INSTRUCTIONS MAXIS 6K Puller (M6K-M) READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND SAFETY INFORMATION IN THIS MANUAL BEFORE OPERATING OR 04/17 (M6K-M) SERVICING THIS TOOL TABLE

More information

Owner s Manual. Model H4685

Owner s Manual. Model H4685 Owner s Manual Model H4685 TABLE OF CONTENTS Important Information.................................... 3 Parts.................................................. 4 Battery Installation......................................

More information

user manual .68 CALIBER ELECTRONIC PAINTBALL MARKER Meets or exceeds ASTM standards.

user manual .68 CALIBER ELECTRONIC PAINTBALL MARKER  Meets or exceeds ASTM standards. user manual TM TM TABLE OF CONTENTS: Page Topic(s) 1 Warning and Rules Safe Marker Handling 2 Warranty Information 3 Welcome 4 Initial Assembly 6 Parts Key 7 Exploded Diagram 8 Battery Installation 9 Attaching

More information

Tactical Sniper air rifle & carbine

Tactical Sniper air rifle & carbine Tactical Sniper air rifle & carbine User instruction manual Fill pressure: 200 bar (approximately 2,900 psi) Rev 4/17 Contents Rules of safe shooting... 3 Filling your rifle... 4-5 Loading the magazine...

More information

IZH 60/61 air rifle owner s manual

IZH 60/61 air rifle owner s manual IZH 60/61 air rifle owner s manual IZH 61 IZH 60 5135 Naiman Parkway Solon, OH 44139 216-220-1180 Record your gun s serial number:... Follow the warnings and safety procedures shown here and throughout

More information

RULES FOR SAFE FIRING:

RULES FOR SAFE FIRING: EN THIS AIRGUN IS INTENDED FOR USE BY THOSE YEARS OF AGE OR OLDER. ADULT SUPERVISION REQUIRED. SOFT-AIR-PISTOL PPK/S BLOW BACK RULES FOR SAFE FIRING:. Get to know the single parts of your new soft-air

More information

M3-LED. Operator s Manual. Operator s Manual MADE IN THE USA USA

M3-LED. Operator s Manual. Operator s Manual MADE IN THE USA USA M3-LED Operator s Manual Operator s Manual MADE IN THE USA USA Section TABLE OF CONTENTS Page Warnings and Cautions... 1 M3-LED Parts Diagram... 4 Mounting... 6 Dismounting... 8 Switch Operation... 10

More information

OPERATING and MAINTENANCE INSTRUCTIONS MAXIS 3K Puller (M3K-M)

OPERATING and MAINTENANCE INSTRUCTIONS MAXIS 3K Puller (M3K-M) OPERATING and MAINTENANCE INSTRUCTIONS MAXIS 3K Puller (M3K-M) 04/17 (M3K-M) READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND SAFETY INFORMATION IN THIS MANUAL BEFORE OPERATING OR SERVICING THIS TOOL TABLE

More information

Windy City II. User instruction manual WARNING: Fill pressure: 200 bar (approximately 2,900 psi)

Windy City II. User instruction manual WARNING: Fill pressure: 200 bar (approximately 2,900 psi) Windy City II User instruction manual Rules of safe shooting... 2 Filling the rifle... 3-4 Loading the magazine... 5-6 Inserting the magazine... 7 Adjusting the trigger... 7-8 Safety... 9 Warranty... 10

More information

Misaligned Folds Paper Feed Problems Double Feeds Won t Feed FLYER Won t Run iii

Misaligned Folds Paper Feed Problems Double Feeds Won t Feed FLYER Won t Run iii Operator s Manual Table of Contents Operator Safety... 1 Introduction... 2 Unpacking and Setup... 3 Unpacking... 3 Setup... 4 FLYER Overview... 5 FLYER Diagram... 5 Capabilities... 5 Control Panel... 6

More information

User Instruction Manual

User Instruction Manual User Instruction Manual 4500 psi Air Compressor Ver 2, 1.18 Contents Parts Included...3 Assembly Instructions...3-5 Operation Instructions...6-7 Oil Change Intervals...8 Air Filter Replacement...9 Setting

More information

Puncher PCP Models. User Instruction Manual. Fill pressure: 200 bar (approximately 2,900 psi) Ver: 8/17

Puncher PCP Models. User Instruction Manual. Fill pressure: 200 bar (approximately 2,900 psi) Ver: 8/17 Puncher PCP Models User Instruction Manual Fill pressure: 200 bar (approximately 2,900 psi) Ver: 8/17 2 Contents Rules of safe shooting...3 Safety...4 Filling the rifle... 5-6 Loading the rifle... 7-8

More information

user manual .68 CALIBER ELECTRONIC PAINTBALL MARKER Meets or exceeds ASTM standards.

user manual .68 CALIBER ELECTRONIC PAINTBALL MARKER  Meets or exceeds ASTM standards. user manual TM TM TABLE OF CONTENTS: Page Topic(s) 1 Warning and Rules Safe Marker Handling 2 Warranty Information 3 Welcome 4 Initial Assembly Battery Installation 9 Attaching Propellant Source Attaching

More information

SodaStream is the modern way to enjoy delicious bubbles. without the bottles. No more lugging or storing heavy

SodaStream is the modern way to enjoy delicious bubbles. without the bottles. No more lugging or storing heavy QUICK START GUIDE SPIRIT / FIZZY / EASY Please read this Quick Start Guide before using the Sparkling Water Maker. SMART SodaStream is the modern way to enjoy delicious bubbles without the bottles. No

More information

2 GALLON TWIN STACK AIR COMPRESSOR W/ HOSE REEL

2 GALLON TWIN STACK AIR COMPRESSOR W/ HOSE REEL 2 GALLON TWIN STACK AIR COMPRESSOR W/ HOSE REEL Model: 52024 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement,

More information

Congratulations on your purchase of a JC Series Performer trike! The Performer JC Series is designed for everything from touring to commuting and

Congratulations on your purchase of a JC Series Performer trike! The Performer JC Series is designed for everything from touring to commuting and Congratulations on your purchase of a JC Series Performer trike! The Performer JC Series is designed for everything from touring to commuting and shopping in the city. The JC Series frames are made of

More information

VIBE. Quick Start Manual

VIBE. Quick Start Manual VIBE Quick Start Manual STATISTICS PLEASE READ CAREFULLY VITAL STATISTICS LENGTH/HEIGHT/WEIGHT: OPERATING PRESSURE: PAINTBALLS: POWER SOURCE: PROPELLANT: RATE OF FIRE: OPERATION: MODES OF FIRE: ANTI CHOP

More information

/ FLT-M Quick Clean Rotary Airlock Valve Operators Manual. Kice Industries, Inc. RAV-M RAV-M

/ FLT-M Quick Clean Rotary Airlock Valve Operators Manual. Kice Industries, Inc. RAV-M RAV-M 1 Quick Clean Rotary Airlock Valve Operators Manual Kice Industries, Inc. RAV-M04-0000 RAV-M04-0000 2 INTRODUCTION When you purchased your new Kice equipment, you bought a dependable and quality-built

More information

CROSSBOWS XR175. Recurve Crossbow OWNER S MANUAL

CROSSBOWS XR175. Recurve Crossbow OWNER S MANUAL CROSSBOWS XR175 Recurve Crossbow OWNER S MANUAL READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING If you have any questions about this product or need some help, do not return the product to the store before

More information

Beeman Precision Airguns R-Series Air Rifle Owner s Manual

Beeman Precision Airguns R-Series Air Rifle Owner s Manual Beeman Precision Airguns R-Series Air Rifle Owner s Manual WARNING Not a toy. Adult supervision required. Misuse or careless use may cause serious injury or death. Contents Rules of safe shooting... 3

More information

FOOSBALL ASSEMBLY, INSTRUCTIONS AND RULES PL

FOOSBALL ASSEMBLY, INSTRUCTIONS AND RULES PL FOOSBALL ASSEMBLY, INSTRUCTIONS AND RULES 56007 PL Waterloo Valley Road / Mt. Olive, NJ 07828 / www.sportcraft.com / (800) 526-0244 / Fax: (97) 47-54 MODEL # 56007 PL Congratulations on owning a new KT

More information

444C DUAL PERFORMANCE VALUE PACK

444C DUAL PERFORMANCE VALUE PACK (Chrome) PART NO. 44432 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before installing and using this product. SAVE THIS MANUAL

More information

FIRESTORM. Assembly Instructions. Electric Upgrade Kit for the Autococker. Designed & Manufactured by PGI

FIRESTORM. Assembly Instructions. Electric Upgrade Kit for the Autococker. Designed & Manufactured by PGI FIRESTORM Electric Upgrade Kit for the Autococker Assembly Instructions Designed & Manufactured by PGI Table of Contents Introduction 1 Safety 1 Parts Diagram 2 Parts Diagram Listing 2 Getting Started

More information

Remington 700. Disclaimer Limited Warranty Satisfaction Guarantee Installation Instructions

Remington 700. Disclaimer Limited Warranty Satisfaction Guarantee Installation Instructions Remington 700 Disclaimer Limited Warranty Satisfaction Guarantee Installation Instructions WARNING: Failure to properly install your trigger and ensure proper safety functionality could result in an unsafe

More information

USER MANUAL ELECTRIC BLOWBACK SYSTEM

USER MANUAL ELECTRIC BLOWBACK SYSTEM LIMITED WARRANTY Spartan Imports warrants this airsoft rifle purchased through Spartan Imports Authorized Dealers to be free from manufacturer defects in materials and workmanship under normal consumer

More information

Read through all the steps first before working on the camera. Make sure you know what to do.

Read through all the steps first before working on the camera. Make sure you know what to do. Step-by-step procedure to fix lack of contact in the end-of-travel switch of a D700 pop-up flash DISCLAIMER: PLEASE UNDERSTAND THAT IF YOU DECIDE TO FOLLOW THE INFORMATION PROVIDED BELOW YOU DO SO AT YOUR

More information

USER MANUAL

USER MANUAL C Cimarron Sports 1-888-816-6517 www.cimarronsports.com Combo Pitching Machine USER MANUAL TABLE OF CONTENTS Thank you for purchasing the Cimarron Combo Pitching Machine. The Cimarron Combo Pitching Machine

More information

MODEL Beretta 92FS. Caliber.177 (4.5 mm) Pellet CO 2 Air Pistol. Operating instructions 3-15

MODEL Beretta 92FS. Caliber.177 (4.5 mm) Pellet CO 2 Air Pistol. Operating instructions 3-15 MODEL Beretta 92FS Caliber.177 (4.5 mm) Pellet CO 2 Air Pistol Operating instructions 3-15 CONTT 1 Safety instructions 2 Description of Parts 3 Operation WARNING: NOT A TOY. ADULT SUPERVISION REQUIRED.

More information

OWNER'S MANUAL

OWNER'S MANUAL OWNER'S MANUAL www.umarex-usa.com MODELS Beretta 92FS and 92FS Match Caliber.177 (4.5 mm) Pellet CO2 Air Pistol patented Not a toy. Adult supervision required. Misuse or careless use may cause serious

More information

200 PSI COMPRESSORS - MODEL NUMBERS

200 PSI COMPRESSORS - MODEL NUMBERS 200 PSI COMPRESSORS - MODEL NUMBERS 380C AIR COMPRESSOR KIT PART NO. 38033 480C AIR COMPRESSOR KIT PART NO. 48043 380C 480C IMPORTANT: It is essential that you and any other operator of this product read

More information

Not a toy. Adult supervision required. Misuse or careless use may cause serious injury or death. May be dangerous up to 350 yards (320 meters).

Not a toy. Adult supervision required. Misuse or careless use may cause serious injury or death. May be dangerous up to 350 yards (320 meters). Owner's Manual www.umarex-usa.com CP99 CO2 Air Pistol.177 cal. (4.5 mm) Pellet patented Not a toy. Adult supervision required. Misuse or careless use may cause serious injury or death. May be dangerous

More information

100C Air Compressor Kit

100C Air Compressor Kit 10010 100C Air Compressor (standard mounting bracket, CE Spec) 10014 100C Air Compressor (no leader hose or check valve, CE Spec) 10016 100C Air Compressor (with Omega Bracket, CE Spec) IMPORTANT: It is

More information

PROPORTIONING VALVE. Model 150 INSTRUCTION MANUAL. March 2017 IMS Company Stafford Road

PROPORTIONING VALVE. Model 150 INSTRUCTION MANUAL. March 2017 IMS Company Stafford Road PROPORTIONING VALVE Model 150 INSTRUCTION MANUAL March 2017 IMS Company 10373 Stafford Road Telephone: (440) 543-1615 Fax: (440) 543-1069 Email: sales@imscompany.com 1 Introduction IMS Company reserves

More information

400C & 450C DUAL PERFORMANCE VALUE PACKS

400C & 450C DUAL PERFORMANCE VALUE PACKS (Chrome) PART NO. 40013 (Silver) PART NO. 45012 (Chrome) PART NO. 45013 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before

More information

User Manual GRI- 1500Li

User Manual GRI- 1500Li User Manual GRI- 1500Li Your Cart Tek caddy cart was thoroughly quality control checked and road tested before being shipped to your address. We do everything possible to assure that your caddy is in perfect

More information

420C AIR COMPRESSOR KIT PART NO C AIR COMPRESSOR KIT PART NO

420C AIR COMPRESSOR KIT PART NO C AIR COMPRESSOR KIT PART NO 420C AIR COMPRESSOR KIT PART NO. 42042 460C AIR COMPRESSOR KIT PART NO. 46043 420C 460C IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this

More information

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS CAUTION - To reduce risk of electrical shock: - Do not disassemble. Do not attempt repairs or modifications. Refer to qualified service agencies for all service and repairs.

More information

AR STYLE FIREARMS OWNER'S MANUAL: OPERATION, HANDLING, DISASSEMBLY / REASSEMBLY & SAFETY INSTRUCTIONS

AR STYLE FIREARMS OWNER'S MANUAL: OPERATION, HANDLING, DISASSEMBLY / REASSEMBLY & SAFETY INSTRUCTIONS AR STYLE FIREARMS OWNER'S MANUAL: OPERATION, HANDLING, DISASSEMBLY / REASSEMBLY & SAFETY INSTRUCTIONS - DO NOT DISCARD THIS MANUAL - READ THIS MANUAL CAREFULLY, PAYING CLOSE ATTENTION TO THE INSTRUCTIONS

More information

ROPV R40 E Series User Manual

ROPV R40 E Series User Manual HARBIN ROPV INDUSTRY DEVELOPMENT CENTER ROPV R40 E Series User Manual For Use with the Following ROPV Pressure Vessel Models: R40 300E R40 450E Headquarters Tel:(+86)451-82267301 Fax:(+86)451-82267303

More information

USER MANUAL ELECTRIC BLOWBACK SYSTEM. Rev LIMITED WARRANTY

USER MANUAL ELECTRIC BLOWBACK SYSTEM. Rev LIMITED WARRANTY LIMITED WARRANTY Spartan Imports warrants this airsoft rifle purchased through Spartan Imports Authorized Dealers to be free from manufacturer defects in materials and workmanship under normal consumer

More information

Instruction Sheet. CP2000: 2000 lb Cable Puller IMPORTANT RECEIVING INSTRUCTIONS SAFETY ISSUES

Instruction Sheet. CP2000: 2000 lb Cable Puller IMPORTANT RECEIVING INSTRUCTIONS SAFETY ISSUES Instruction Sheet CP2000: 2000 lb Cable Puller RPS-0148 07/02 IMPORTANT RECEIVING INSTRUCTIONS Visually inspect all components for shipping damage. If shipping damage is found, notify carrier at once.

More information

600 / 600FC OWNER'S MANUAL

600 / 600FC OWNER'S MANUAL PROGRESSION 600 / 600FC OWNER'S MANUAL Issue 2 / Version E - Dec. 10, 1997 Copyright 1997 GAMMA Sports - All Rights Reserved PROGRESSION 600 / 600FC OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY

More information

Operating Instructions for BAIR22-6 AIR-POWERED CRIMPING TOOL

Operating Instructions for BAIR22-6 AIR-POWERED CRIMPING TOOL Operating Instructions for BAIR22-6 AIR-POWERED CRIMPING TOOL Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Table of Contents

More information

FULL METAL M4 COBRA ASSAULT RIFLE HANDLING & INSTRUCTIONS MANUAL

FULL METAL M4 COBRA ASSAULT RIFLE HANDLING & INSTRUCTIONS MANUAL ITEM NO. 3500 FULL METAL M4 COBRA ASSAULT RIFLE HANDLING & INSTRUCTIONS MANUAL ignite-blackops.com Manufactured & Distributed by 2012 Bear River International, LLC Logan, UT 84321 All Rights Reserved MADE

More information

USER GUIDE TO POWER ASSISTED BIKES

USER GUIDE TO POWER ASSISTED BIKES USER GUIDE TO POWER ASSISTED BIKES 1 PAGE CONTENTS Page. 3 Unpacking Page. 3-4 Easy steps to get started Page. 5 General Assembly Instructions Page. 6 Aligning H/Bars, Page. 7 Tightening pedals onto Crank

More information

Shocker Sport TM Manual. Includes: Shocker Sport 4X4 TM and Shocker Sport Turbo TM

Shocker Sport TM Manual. Includes: Shocker Sport 4X4 TM and Shocker Sport Turbo TM Shocker Sport TM Manual Includes: Shocker Sport 4X4 TM and Shocker Sport Turbo TM WARNING! The Shocker Sport TM Paintball Marker is not a toy. Misuse or careless use may cause serious injury or death.

More information

MAYHEM MAYHEM OWNERS MANUAL. Paintball Guns International. Manufactured by

MAYHEM MAYHEM OWNERS MANUAL. Paintball Guns International. Manufactured by MAYHEM MAYHEM OWNERS MANUAL Manufactured by Paintball Guns International Table of Contents Specifications...................... 2 Parts diagram and Listing............. 3 Description of Marker Operation.......

More information

Ecomow Electric Mower

Ecomow Electric Mower Ecomow Electric Mower 1100 Watt Operation Manual 2 Year Replacement Warranty ECO-320 - Type 1 0509 To view the entire range visit: www.ozito.com.au SPECIFICATIONS - MODEL NO. ECO-320 Motor Size: 1100W

More information

Cover EX Installation Instructions

Cover EX Installation Instructions Cover EX Installation Instructions 1. Lay out all the parts and verify that they are all present according to the Cover EX Parts and Hardware List. See Fig 1. Call 800-730-7727 for all replacement and

More information

THIS IS AN ADULT AIRGUN AND ACCORDING TO ASTM STANDARDS, IT IS EXEMPT FROM HAVING A SAFETY.

THIS IS AN ADULT AIRGUN AND ACCORDING TO ASTM STANDARDS, IT IS EXEMPT FROM HAVING A SAFETY. Owner's Manual 586 and 686 Series CO2 Air Revolver cal..177 (4.5 mm) Pellet Pat. applied for This airgun is recommended for adult use only. Careless use may cause serious injury or death. Dangerous within

More information

SOTR Special Operations Tactical Respirator

SOTR Special Operations Tactical Respirator SOTR Special Operations Tactical Respirator OPERATOR S MANUAL FOR INDIVIDUAL RESPIRATORY PROTECTION OPS-CORE 2018 OMM G055-1000 REV. B INTRODUCTION ABOUT YOUR SOTR The Ops-Core Special Operations Tactical

More information

6 & 8 Bubble Panel Installation Manual

6 & 8 Bubble Panel Installation Manual 6 & 8 Bubble Panel Installation Manual IMPORTANT RETAIN FOR FUTURE REFERENCE READ CAREFULLY You must use Distilled Water only. Use of any water other than distilled voids the warranty. Please check the

More information

User Instruction Manual

User Instruction Manual User Instruction Manual PRE-CHARGED PNEUMATIC PCP Air Rifle With Built-In Pump Ver 1, 9/18 CONTENTS Rules of safe shooting...3 Warnings...4 Parts of your Aspen air rifle...5 Operating the safety...6 Trigger...6

More information

POWER ASSISTED BICYCLES OWNERS MANUAL

POWER ASSISTED BICYCLES OWNERS MANUAL POWER ASSISTED BICYCLES OWNERS MANUAL WE HAVE INCLUDED A BICYCLE OWNER S MANUAL WHICH YOU SHOULD REFER TO FOR ALL GENERAL CYCLE MAINTENANCE. CONTENTS Page. 3 Unpacking. Page. 3-4 Easy steps to get started.

More information

Cocoa Patio Pond with Lit Spillway

Cocoa Patio Pond with Lit Spillway Cocoa Patio Pond with Lit Spillway REMINDER CALL 1-888-755-5641 BEFORE RETURNING TO STORE. PACKAGE CONTENTS ITEM # GQSPPB/GQSPPW Questions, problems, missing parts? Before returning to your retailer, call

More information

Lock-N-Load. Bullet Feeder

Lock-N-Load. Bullet Feeder Lock-N-Load Bullet Feeder table of contents steps Overview... 2 List of required hand tools... 2 1: Mounting the Bullet Feeder to the Bench... 3 2: Mounting the Bullet Feed Hopper... 4 3: Bullet Feed Hopper

More information

AC1810 / AC1810-A TECHNICAL SPECIFICATIONS. Operating Pressure psi ( kgs/cm²) [AC1810] Displacement. Net Weight

AC1810 / AC1810-A TECHNICAL SPECIFICATIONS. Operating Pressure psi ( kgs/cm²) [AC1810] Displacement. Net Weight Technical Specifications Operating Instructions Maintenance Information Troubleshooting Guide Parts Diagrams AC1810 / AC1810-A THE EVOLUTION OF PERFECTION CAUTION: Before attempting to use or service this

More information

Issue OWNER S MANUAL. GAMMA RACQUET SPORTS GAMMA Sports All Rights Reserved

Issue OWNER S MANUAL. GAMMA RACQUET SPORTS GAMMA Sports All Rights Reserved OWNER S MANUAL CONTENTS PARTS LIST.. 2 ASSEMBLY INSTRUCTIONS.. 3 SWING WEIGHT TEST.. 4 RACQUET BALANCE TEST.. 5 RACQUET WEIGHT TEST.. 6 CALIBRATION - SWING WEIGHT.. 7 CALIBRATION - WEIGHT SCALE.. 8 MACHINE

More information

OWNER'S MANUAL. Copyright 2003 GAMMA - All Rights Reserved

OWNER'S MANUAL. Copyright 2003 GAMMA - All Rights Reserved OWNER'S MANUAL AL Issue 1 - December 2003 Copyright 2003 GAMMA - All Rights Reserved OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2... ASSEMBLY INSTRUCTIONS PAGE 4... MOUNTING THE RACQUET PAGE

More information

SPECIFICATIONS TABLE Maximum Air Pressure 115 PSI Air Tank Capacity 20 Gallons

SPECIFICATIONS TABLE Maximum Air Pressure 115 PSI Air Tank Capacity 20 Gallons SPECIFICATIONS TABLE Maximum Air Pressure 115 PSI Air Tank Capacity 20 Gallons Air Flow Capacity 6.2 CFM at 40 PSI 5.2 CFM at 90 PSI Motor 2.5 HP Working / 4 HP Peak 120 Volt / 60 Hz / 13 A / 1-Phase Required

More information

DRAG HARROW SAFETY & OPERATING INSTRUCTIONS. Original Language. Serial No. Order No.

DRAG HARROW SAFETY & OPERATING INSTRUCTIONS. Original Language. Serial No. Order No. DR ` DRAG HARROW SAFETY & OPERATING INSTRUCTIONS Serial No. Order No. Original Language DR Power Equipment Toll-free phone: 1-800-DR-OWNER (376-9637) Fax: 1-802-877-1213 Website: www.drpower.com Read and

More information

IZH 46M air pistol owner s manual

IZH 46M air pistol owner s manual IZH 46M air pistol owner s manual 18370 S. Miles Rd. Warrensville Heights, OH 44128 216-220-1180 Record the serial number of your airgun... Follow the warnings and safety procedures shown here and throughout

More information

Operating Instructions for:

Operating Instructions for: Operating Instructions for: 2.4GHz Radio Control Model Boat Please read the instruction manual carefully before operating. CAUTION: DESIGNED FOR FRESH WATER USE ONLY. FEATURES 2.4GHz radio included Radio

More information

Lil Fun Walker ASSEMBLY INSTRUCTIONS ADULT ASSEMBLY REQUIRED Styles and colors may vary

Lil Fun Walker ASSEMBLY INSTRUCTIONS ADULT ASSEMBLY REQUIRED Styles and colors may vary Lil Fun Walker ASSEMBLY INSTRUCTIONS ADULT ASSEMBLY REQUIRED Styles and colors may vary Required: Phillips Screwdriver IMPORTANT: Read all instructions before assembly and use of the Walker Keep the instructions

More information

High Power Commercial Blenders

High Power Commercial Blenders Intertek High Power Commercial Blenders 928BX2000T Toggle Controls 928BX2100E Digital Controls 928BX2000V Variable Speed SAFETY 1. READ AND SAVE ALL INSTRUCTIONS. 2. Do not immerse the blender in water

More information

.177 Cal. CO2 BB Tactical Rifle

.177 Cal. CO2 BB Tactical Rifle HELLRAISER.177 Cal. CO2 BB Tactical Rifle User Instruction Manual For ages 16 and older with adult supervision V1 10/17 CONTENTS Rules of safe shooting...3 Specifications... 4 Learning parts of your airgun...

More information

AIR COMPRESSOR. Failure to follow all instructions as listed below may result in electrical shock, fire, and/or serious personal injury.

AIR COMPRESSOR. Failure to follow all instructions as listed below may result in electrical shock, fire, and/or serious personal injury. 2 GALLON AIR COMPRESSOR Model: 7517 DO NOT RETURN TO STORE. Please CALL 800-348-5004 for parts and service. CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials

More information

Paintball Marker. User s Manual. 530 South Springbrook Road Newberg, OR 97132

Paintball Marker. User s Manual. 530 South Springbrook Road Newberg, OR 97132 Paintball Marker User s Manual 530 South Springbrook Road Newberg, OR 97132 Component Concepts, Inc., 530 South Springbrook Road, Newberg, OR 97132 Phone: (503) 554-8095 Fax: (503) 554-9370 www.phantomonline.com

More information

400H HARDMOUNT AIR COMPRESSOR KIT PART NO H HARDMOUNT AIR COMPRESSOR KIT PART NO

400H HARDMOUNT AIR COMPRESSOR KIT PART NO H HARDMOUNT AIR COMPRESSOR KIT PART NO 400H HARDMOUNT AIR COMPRESSOR KIT PART NO. 40042 450H HARDMOUNT AIR COMPRESSOR KIT PART NO. 45042 400H 450H IMPORTANT: It is essential that you and any other operator of this product read and understand

More information

All it takes is you. No gas, cords or batteries. StaySharp TM Max Reel Mower Model number:

All it takes is you. No gas, cords or batteries. StaySharp TM Max Reel Mower Model number: All it takes is you. No gas, cords or batteries StaySharp TM Max Reel Mower Model number: 362050 Before assembling or using the mower, read through the entire manual and fully understand the safety information.

More information

Sport Grouse PRO REMOTE CONTROL LAUNCHER INSTRUCTION MANUAL

Sport Grouse PRO REMOTE CONTROL LAUNCHER INSTRUCTION MANUAL Visit our website for all your launcher dummies and launcher accessories for your Sport Grouse PRO Remote Launcher Sport Grouse PRO REMOTE CONTROL LAUNCHER INSTRUCTION MANUAL SAFETY FIRST This device fires

More information

Operation Manual. O2 Quickstick. Oxygen Analyzer

Operation Manual. O2 Quickstick. Oxygen Analyzer Operation Manual O2 Quickstick Oxygen Analyzer 01.11 www.nuvair.com If you have any questions on this equipment please contact Technical Support at: Nuvair 2949 West 5 th St. Oxnard, CA 93030 Phone: 805-815-4044

More information

HATFIELD. Continuing the Tradition SEMI-AUTOMATIC SHOTGUN INSTRUCTION MANUAL

HATFIELD. Continuing the Tradition SEMI-AUTOMATIC SHOTGUN INSTRUCTION MANUAL HATFIELD Continuing the Tradition SEMI-AUTOMATIC SHOTGUN INSTRUCTION MANUAL READ THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL CAREFULLY BEFORE USING THIS FIREARM SAFETY HANDLING RULES 1.Always keep the

More information