Inflatable Pontoons Listing ID:

Transcription

1 Australia - Great Britain - Indonesia - New Zealand - Philippines - Thailand - USA E: sales@seaboats.net (sales) - E: admin@seaboats.net (accounts) Inflatable Pontoons Listing ID: DESCRIPTION: AiroDock - Floating Pontoon LENGTH: Available in 10m lengths BEAM: Each pontoon is 1.4m wide LOCATION: ex factory, New Zealand PRICE: POA PRICE NOTES: We can ship anywhere General Description AiroDock is one of the most unique temporary docking systems in the world. The features of the AiroDock are completely revolutionary, with no other product on the market able to offer this system or characteristics. One of the strengths of AiroDock s design is it s simple construction. This allows for individual customer needs such as length, shape or layout of existing fittings. It is also light, strong, safe and stable. Construction turn around time and delivery is very quick, as well as being very cost effective compared with traditional docking systems. Initially, the AiroDock was primarily designed as a temporary wharf or jetty, useful at a holiday house or any temporary aquatic event. Because of its popularity and ease of use, it has also been adapted to be used as a pontoon behind super yachts, waterskiing station or as a floatplane walkway AiroDock The AiroDock was initially designed for use a temporary wharf or jetty. This specific design use means the AiroDocks characteristics were tailor-made to suit its job, and it excels at what it does. There are many convincing benefits over a traditional wharf or jetty. It is completely self fendering, so no damage to boats and Jet Ski s. The AiroDock is totally inflatable it rises and falls with the tide so no more dangerous steps to negotiate or difficult balancing for the young and not-so-young. Its high buoyancy and low profile make it unobtrusive in the environment. It will not disrupt the view from a holiday house or deck. The AiroDock is a great alternative to expensive wooden wharf s or drum styled marina wharfs. Lack of maintenance and weather damage can often make traditional wharfs unsafe and expensive to repair. The temporary nature of the AiroDock means little or no environmental damage or safety concerns due to neglect or weather impact. There is little or no maintenance. With AiroDock being a temporary structure we do not anticipate any issues with the local councils. Although, if the AiroDock is going to be in the water for extended periods of time we advise a check with the local councils to ensure no permits or consents are required. Company Profile Lancer Industries is a trusted name in the inflatable boat industry with 35 years of experience and knowledge. Lancer has always been at the front-line of the boating industry with contracts worldwide. The company has supplied to Greenpeace, Government Departments, the US Coast Guard, and to many other customers, including defense organizations. Lancer has earned a respected name in the industry because of its high quality of workmanship, techniques, strength and safety, and its use of unbeatable fabrics. With this history and experience, Lancer Industries saw an opportunity to expand its product and to design a high quality, innovative temporary dock, which provides a safe and versatile alternative to traditional docking. The AiroDock brings an n assurance of quality and craftsmanship which all the Lancer Industry products are renown. Features Easy to use No need for tenders Self-fendering Multiple fixing points Safe and Stable, anti-slip Low impact on environment Low Maintenance 15 December Listing ID: {427303} Page 1 of 6

2 Easily customized Efficient to store, pack and transport Specifications Available in 10m lengths x 1.4m wide Can be customized to suit Six mooring points top and bottom Choice of fittings to suit specific needs Drawing of Dock The illustration is the standard layout; however the AiroDock can be customized to suit individual needs. If there is more than one application for the AiroDock, then the experienced design team will make it work equally well for each situation. For example, as in the illustration, the shaded beach end has an extra layer of neoprene for protection. For superyatch and waterskiing there is no extra neoprene layer, but an extra set of stabilizers is added as well as six D-rings or fixing points top and bottom. Standard Fittings Fixing points, where boats and jet skis are tied off and where mooring lines are attached. Valves beach and sea end The beach-end valve is for inflating and the sea-end for deflating. Extra valves may be necessary depending on the size of the AiroDock DIFFERENT USES Super Yachts The AiroDock can act as a beach or pontoon for super yachts. As well as being able to tie up multiple jet skis and tenders to the AiroDock, it will also prevent damage to the super yacht hull. The AiroDock can be used as a walkway from shore to vessel and provide easy access for yourself and guests. It can also double as a waterskiing station, diving platform and for sunbathing. The AiroDock can be custom-built not only for super yachts, but can be designed to suit a 30ft sailing boat. Pack it down, fold it up and store it under a seat in the cabin. Sea Planes Use the AiroDock to allow safe and easy access to shore for your passengers at a variety of locations. Set it up in minutes and offload passengers in comfort, no wet feet in any situation or any destination. Ideal for ease of use, very compact and easy to store. Take wedding parties, tourist and adventurers to locations without disembarking hassles. Allows you the freedom of flying in to difficult access areas and letting your passengers get to most locations Environment AiroDock has a low impact on the environment. Traditional wharfs often leach pollutants into waterways from both wood and metals which affect marine life shorelines and birdlife. The AiroDock is made from non-corrosive materials which do not break down or become unstable over time. Also, because the AiroDock is not a permanent feature in any marine landscape it does not impact on the visual landscape as much as wharfs or other marine walkways. It has a low profile and floats and rises with the tide, more in keeping with a marine environment. INSTRUCTIONS Land Use Set up the AiroDock on shore by placing the deflated dock by the waters edge. Inflate to operating pressure. Once at pressure, tie the two fixing points (D-rings) at the back of the dock to a solid object. Run two guy ropes on a 45 degree angle from halfway down the dock to a secure object. This will hold boats up to 10m. For larger vessels it is recommended an anchor is run from the sea end down to the seabed for added stability Super Yacht Inflate the dock out of the stern of the ship. Once the AiroDock is at pressure, lower it into the water. Run 2-4 lines from the fixing points back to the ship and secure tightly For best result ensure all mooring lines are as tight as possible to minimize movement of the dock. AiroDock is low maintenance but it is recommended that if left in water for extended periods it is advisable to pull it out every days to check for any sea growth. Brush it down and check the fittings for any wear. A repair kit is included for fixing minor punctures and repais. 15 December Listing ID: {427303} Page 2 of 6

3 IMPORTANT: The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subjec to prior sale, price change, or withdrawal without notice. Inflatable Pontoons Images 15 December Listing ID: {427303} Page 3 of 6

4 15 December Listing ID: {427303} Page 4 of 6

5 15 December Listing ID: {427303} Page 5 of 6

6 15 December Listing ID: {427303} Page 6 of 6