PIP PN03SV0S01 Piping Material Specification 3SV0S01 Class 300, Alloy 254 SMO (UNS S31254), Socket Weld, C.A. Process (PTFE Packing/Gaskets)
|
|
|
- Corey Gilbert
- 6 years ago
- Views:
Transcription
1 May 2016 Piping PIP PN03SV0S01 Piping Material Specification 3SV0S01 Class 300, Alloy 254 SMO (UNS S31254), Socket Weld, C.A. Process (PTFE Packing/Gaskets)
2 PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical requirements in the existing standards of major industrial users, contractors, or standards organizations. By harmonizing these technical requirements into a single set of Practices, administrative, application, and engineering costs to both the purchaser and the manufacturer should be reduced. While this Practice is expected to incorporate the majority of requirements of most users, individual applications may involve requirements that will be appended to and take precedence over this Practice. Determinations concerning fitness for purpose and particular matters or application of the Practice to particular project or engineering situations should not be made solely on information contained in these materials. The use of trade names from time to time should not be viewed as an expression of preference but rather recognized as normal usage in the trade. Other brands having the same specifications are equally correct and may be substituted for those named. All Practices or guidelines are intended to be consistent with applicable laws and regulations including OSHA requirements. To the extent these Practices or guidelines should conflict with OSHA or other applicable laws or regulations, such laws or regulations must be followed. Consult an appropriate professional before applying or acting on any material contained in or suggested by the Practice. This Practice is subject to revision at any time. Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at Austin, 3925 West Braker Lane (R4500), Austin, Texas PIP Member Companies and Subscribers may copy this Practice for their internal use. Changes or modifications of any kind are not permitted within any PIP Practice without the express written authorization of PIP. Authorized Users may attach addenda or overlays to clearly indicate modifications or exceptions to specific sections of PIP Practices. Authorized Users may provide their clients, suppliers and contractors with copies of the Practice solely for Authorized Users purposes. These purposes include but are not limited to the procurement process (e.g., as attachments to requests for quotation/ purchase orders or requests for proposals/contracts) and preparation and issue of design engineering deliverables for use on a specific project by Authorized User s client. PIP s copyright notices must be clearly indicated and unequivocally incorporated in documents where an Authorized User desires to provide any third party with copies of the Practice. PUBLISHING HISTORY September 2000 Issued May 2007 Complete Revision May 2001 Tehcnical Correction May 2016 Complete Revision Not printed with State funds
3 SERVICE: Process MATERIAL: Alloy 254 SMO (UNS S31254) RATING CLASS: 300, ASME B DESIGN CODE: ASME B TEMPERATURE LIMIT: -29 C to 204 C (-20 F to 400 F) (Note 09) STRESS RELIEF: None Required NOMINAL CORROSION ALLOWANCE: None EXAMINATION: Per ASME B31.3 PRESSURE - TEMPERATURE RATINGS METRIC For NPS 1/2 through NPS 12 (Full flange ratings per ASME B16.5, Table ) For NPS 14 through NPS 24 (Note 01) TEMP C -29 to bar PRESSURE - TEMPERATURE RATINGS US CUSOMARY UNITS For NPS 1/2 through NPS 12 (Full flange ratings per ASME B16.5, Table II ) For NPS 14 through NPS 24 (Note 01) TEMP F -20 to psig ITEM NOTES NPS SCH/RAT ENDS DESCRIPTION USER CODE PIPE 01, 23 1/2 2 40S Alloy 254 SMO, SMLS, ASTM A312-S S Alloy 254 SMO, SMLS, ASTM A312-S Calc Alloy 254 SMO, EFW, ASTM A358-S31254, CL 1 or 3 (Ej=1.00) NIPPLES 03, 23 Branch 1/2 1 1/2 40S Alloy 254 SMO, SMLS, ASTM A312-S31254 Swage (CONC) 1/2 1 1/2 40S Alloy 254 SMO, ASTM A403-WP S31254-S, MSS SP-95 Swage (ECC) 1/2 1 1/2 40S Alloy 254 SMO, ASTM A403-WP S31254-S, MSS SP-95 FITTINGS 02 SW Pipet 170 1/2 1 1/2 Class 300 Weld Alloy 254 SMO, ASTM A182-F44 THRD Pipet 03, 170 1/2 2 Class 300 Weld Alloy 254 SMO, ASTM A182-F44 SW Lateral Pipet 170 1/2 1 1/2 Class 300 Weld Alloy 254 SMO, ASTM A182-F44 90 ELL 1/2 1 1/2 Class 3000 SW Alloy 254 SMO, ASTM A182-F44, ASME B ELL 1/2 1 1/2 Class 3000 SW Alloy 254 SMO, ASTM A182-F44, ASME B16.11 Tee 1/2 1 1/2 Class 3000 SW Alloy 254 SMO, ASTM A182-F44, ASME B16.11 Tee (RED) 1/2 1 1/2 Class 3000 SW Alloy 254 SMO, ASTM A182-F44, ASME B16.11 Plug 1/2 2 THRD Alloy 254 SMO, ASTM A182-F44, round head, ASME B16.11 Plug 53 1/2 1 1/2 PE Alloy 254 SMO, ASTM A182-F44 Coupling 1/2 1 1/2 Class 3000 SW Alloy 254 SMO, ASTM A182-F44, ASME B16.11 Coupling (RED) 1/2 1 1/2 Class 3000 SW Alloy 254 SMO, ASTM A182-F44, ASME B16.11 Cap 1/2 1 1/2 Class 3000 SW Alloy 254 SMO, ASTM A182-F44, ASME B16.11 Reducer (CONC) 2 6 Weld Alloy 254 SMO, ASTM A403-WP S31254-S, ASME B16.9 Reducer (CONC) 8 24 Weld Alloy 254 SMO, ASTM A403-WP S31254-WX, ASME B16.9 Reducer (ECC) 2 6 Weld Alloy 254 SMO, ASTM A403-WP S31254-S, ASME B16.9 Reducer (ECC) 8 24 Weld Alloy 254 SMO, ASTM A403-WP S31254-WX, ASME B16.9 BW Pipet 2 20 Weld Alloy 254 SMO, ASTM A182-F44, MSS SP LR ELL 2 6 Weld Alloy 254 SMO, ASTM A403-WP S31254-S, ASME B LR ELL 8 24 Weld Alloy 254 SMO, ASTM A403-WP S31254-WX, ASME B LR ELL 2 6 Weld Alloy 254 SMO, ASTM A403-WP S31254-S, ASME B LR ELL 8 24 Weld Alloy 254 SMO, ASTM A403-WP S31254-WX, ASME B16.9 Tee 2 6 Weld Alloy 254 SMO, ASTM A403-WP S31254-S, ASME B16.9 Tee 8 24 Weld Alloy 254 SMO, ASTM A403-WP S31254-WX, ASME B16.9 Tee (RED) 2 6 Weld Alloy 254 SMO, ASTM A403-WP S31254-S, ASME B16.9 Tee (RED) 8 24 Weld Alloy 254 SMO, ASTM A403-WP S31254-WX, ASME B16.9 Cap 2 24 Weld Alloy 254 SMO, ASTM A403-WP S31254-S, ASME B16.9 VALVES Gate 06 1/2 2 Class 300 T/SW CK3MCuN body w/ CK3MCuN/F44 trim, HF ST GA03SV200 Gate 1/2 2 Class 300 SW CK3MCuN body w/ CK3MCuN/F44 trim, HF ST GA03SV300 Gate 15 1/2 2 Class 300 RF CK3MCuN body w/ CK3MCuN/F44 trim, HF ST GA03SV500 Gate 3 12 Class 300 RF CK3MCuN body w/ CK3MCuN/F44 trim, HF ST, FP GA03SV501 Globe 1/2 2 Class 300 SW CK3MCuN body w/ CK3MCuN/F44 trim, HF ST GL03SV300 Globe 3 12 Class 300 RF CK3MCuN body w/ CK3MCuN/F44 trim, HF ST GL03SV500 Process Industry Practices Page 1 of 3
4 ITEM NOTES NPS SCH/RAT ENDS DESCRIPTION USER CODE VALVES Lift Check 61 1/2 2 Class 300 SW CK3MCuN body w/ CK3MCuN/F44 trim, piston CL03SV300 Lug Dual PLT 07, 26, Class 300 RF CK3MCuN body w/ CK3MCuN/F44 trim CD03SV500 Check Dual PLT Check 26, Class 300 RF CK3MCuN body w/ CK3MCuN/F44 trim CD03SV701 Wafer Dual PLT 07, 26, Class 300 RF CK3MCuN body w/ CK3MCuN/F44 trim CD03SV700 Check Swing Check 62 1/2 2 Class 300 SW CK3MCuN body w/ CK3MCuN/F44 trim CS03SV300 Swing Check Class 300 RF CK3MCuN body w/ CK3MCuN/F44 trim CS03SV500 Ball 09 1/2 2 Class 300 SW CK3MCuN body w/ CK3MCuN/F44 trim, RPTFE ST BA03SV300 Ball Class 300 RF CK3MCuN body w/ CK3MCuN/F44 trim, RPTFE ST BA03SV500 Ball 08, Class 300 RF CK3MCuN body w/ CK3MCuN/F44 trim, RPTFE ST, FP BA03SV501 Ball Class 300 RF CK3MCuN body w/ CK3MCuN/F44 trim, RPTFE ST, GO BA03SV502 Ball 08, Class 300 RF CK3MCuN body w/ CK3MCuN/F44 trim, RPTFE ST, GO, BA03SV503 FP Ball Class 300 RF CK3MCuN body w/ CK3MCuN/F44 trim, RPTFE ST, GO BA03SV504 Ball 08, Class 300 RF CK3MCuN body w/ CK3MCuN/F44 trim, RPTFE ST, GO, FP BA03SV505 Lug Butterfly 07, 09, Class 300 RF CK3MCuN body w/ CK3MCuN/F44 trim, RPTFE ST, GO BF03SV700 FLANGES 02 Socket Weld 1/2 1 1/2 Class 300 RF Alloy 254 SMO, ASTM A182-F44, ASME B16.5 Blind 1/2 24 Class 300 RF Alloy 254 SMO, ASTM A182-F44, ASME B16.5 Weld Neck 2 24 Class 300 RF Alloy 254 SMO, ASTM A182-F44, ASME B16.5 Slip-on Class 300 RF Alloy 254 SMO, ASTM A182-F44, ASME B16.5 Pair WN Orifice 2 24 Class 300 RF Alloy 254 SMO, ASTM A182-F44, ASME B16.36, SW taps GASKETS BOLTING Stud Bolts Cap Screws 1/2 24 Class 300 1/16" thick filled or reinforced PTFE, ASME B16.21 ASTM A193, Gr B7 stud, w/ 2 heavy hex nuts, ASTM A194, Gr 2H ASTM A193, Gr B7 heavy hex 90 BRANCH CONNECTION Legend and Chart BRANCH SIZE 24 T 20 E T 18 E E T 16 W E E T 14 W W E E T 12 W W W E E T 10 W W W W E E T 8 W W W W W E E T 6 W W W W W W E E T 4 W W W W W W W E E T 3 W W W W W W W W E E T 2 W W W W W W W W W E E T 1 1/2 S S S S S S S S S S S S T 1 S S S S S S S S S S S S E T 3/4 S S S S S S S S S S S S E E T 1/2 S S S S S S S S S S S S E E E T /2 1 3/4 1/2 HEADER SIZE E S T W Reducing Tee SW Pipet Tee BW Pipet Process Industry Practices Page 2 of 3
5 NOTES: 01 If a pipe schedule is shown under "SCH/RAT," it shall be adequate for the full flange rating. If "CALC" is shown, the pressure limit may be lower than full flange rating. 02 All butt-welded component thicknesses shall match the pipe thickness. 03 Threaded joints are permitted only at the outlet of vent and drain valves, hydrostatic connections, outlet instrument take-off valves, and to match equipment. 06 These valves shall be used only for vent, drain, and instrument connections. 07 These valves have no flanges but are installed between line flanges with extra-length bolts. 08 Full-port valves shall be used if indicated on the P&ID. 09 Pressure and temperature rating can be limited by certain components permitted by this Practice. Manufacturer's recommended pressure-temperature restrictions shall be consulted. 13 Weld-neck flanges shall be used against butt-weld fittings. Otherwise, slip-on flanges shall be used. 15 These valves shall be used if mating to flanged nozzles. 23 Sch 80S pipe and pipe nipples shall be used for threaded connections for sizes NPS 1/2 through NPS These check valves shall be used only if indicated on the P&ID. 53 To be used where required for pipe supports, dummy legs and unused socketweld taps. 61 These check valves shall be installed in a horizontal position with cover up. 62 These check valves shall be installed in a horizontal position with cover up or in a vertical position with upward flow. 63 These check valves shall be installed in a horizontal position with hinge pin vertical or in a vertical position with upward flow. 170 These items should be qualified for use in this specification in accordance with ASME B31.3, Paragraph Use cap screws for valves or flanges containing threaded holes. It is recommended that cap screws be supplied by valve supplier/manufacturer to ensure proper length for all threaded holes. REFERENCES: Process Industry Practices (PIP) PIP PNF Vents, Drains, and Instrument Connection Details PIP PNSMV023 - Stainless Steel Gate Valve Descriptions PIP PNSMV024 - Stainless Steel Globe Valve Descriptions PIP PNSMV025 - Stainless Steel Check Valve Descriptions PIP PNSMV026 - Stainless Steel Ball Valve Descriptions PIP PNSMV027 - Stainless Steel Butterfly Valve Descriptions Process Industry Practices Page 3 of 3
PIP PN03SA0S01 Piping Material Specification 3SA0S01 Class 300, 304/304L Stainless Steel, Socket Weld, C.A., Process
May 2016 Piping PIP PN03SA0S01 Piping Material Specification 3SA0S01 Class 300, 304/304L Stainless Steel, Socket Weld, 0.000 C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to
PIP PN03SA0S03 Piping Material Specification 3SA0S03 Class 300, 304/304L Stainless Steel, Socket Weld, C.A.-None, Low Temperature Process
February 2018 Piping PIP PN03SA0S03 Piping Material Specification 3SA0S03 Class 300, 304/304L Stainless Steel, Socket Weld, C.A.-None, Low Temperature Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES
Process Industry Practices Pipeline Systems
September 2013 Process Industry Practices Pipeline Systems PIP PLX03CS5S01 Pipeline Systems, ASME B31.8 Material Specification Inside Production, Well Site Facility, Class 300, Carbon Steel, 0.03125" (1/32
PIP PNSMV004 Carbon Steel Globe Valve Descriptions
February 2015 Piping PIP PNSMV004 Carbon Steel Globe Valve Descriptions PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has
Pipeline Systems PIP PLSMV004 Carbon Steel Globe Valve Descriptions
November 2017 Pipeline Systems PIP PLSMV004 Carbon Steel Globe Valve Descriptions PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
PIP PNE00012 Piping Examination and Leak Test Guide
October 2017 Piping PIP PNE00012 Piping Examination and Leak Test Guide PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has
Hygienic Process Sample PIP PHCM0004 Hygienic Valve Commodity Codes Designator System
Hygienic Process Sample PIP PHCM0004 Hygienic Valve Commodity Codes Designator System PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this
PIP PNSMV037 Bronze and Iron Butterfly Valve Descriptions
October 2017 Piping PIP PNSMV037 Bronze and Iron Butterfly Valve Descriptions PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
Pipeline Systems PIP PLSC0019 Specification for Pressure Testing HDPE Plastic Pipeline Systems
November 2017 Pipeline Systems PIP PLSC0019 Specification for Pressure Testing HDPE Plastic Pipeline Systems PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry
WHEATLEY WHEATLEY SERIES 500 SWING CHECK VALVE. Installation, Operation and Maintenance Manual
WHEATLEY SERIES 500 SWING CHECK VALVE STANDARD INTEGRAL SEAT & OPTIONAL REMOVABLE SEAT 2" FP - 6" FP 150# - 1500# 8" FP - 12" FP 150# - 900# API 6D and B16.34 2" FP - 4" FP 5000# DRILLING PRODUCTION VALVE
ASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.
90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR WATER HEATER SUPPLY SHUTOFF VALVE WITH A / THERMAL EXPANSION CONTROL VALVE IGC 128-2006a8 1. PURPOSE 1.1 The purpose
A soft sealed atmospheric safety valve with large flow capacity and soft seat tightness for steam condenser and turbine applications
SAPAG A soft sealed atmospheric safety valve with large flow capacity and soft seat tightness for steam condenser and turbine applications Features The Sapag Series 1100 steam safety valve is used for
WHEATLEY Series 500 Swing Check Valve
Document Number: TC003001-13 Revision: 02 WHEATLEY Series 500 Swing Check Valve Installation, Operation, and Maintenance Manual TABLE OF CONTENTS BILL OF MATERIALS...3 SCOPE...5 INSTALLATION AND OPERATION
VERTICAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Tight Spaces UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
HORIZONTAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Low Ceilings UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
THE PROCESS OF JOINT INTEGRITY
BOLTED JOINTS A.333 THE PROCESS OF JOINT INTEGRITY To assist in managing a process, ask yourself the following questions: why, what, who, and how? Why do we need a Flange Joint Integrity program? This
Ball Float Steam Trap UNA 43 PN 16/CL 125/JIS 10K UNA 46 PN 40/CL 150/CL 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6"
Data Sheet 819584-00 Issue Date: 01/17 Ball Float Steam Trap UNA 43 PN 16/C 125/JIS 10K UNA 46 PN 40/C 150/C 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6" UNA 43 hl, UNA 46 hl UNA 43 v, UNA 46 v with
THE HF-210 SERIES. Operating and Service Manual. Series includes all variants of HF-210/211. Issue A October 2014 *Section 6.
THE HF-210 SERIES Operating and Service Manual Series includes all variants of HF-210/211 Issue A October 2014 *Section 6.1 in development 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3.
CATALOGUE // The Fort Vale Range of Equipment to suit Hydrogen Peroxide Tank Specification. Fort Vale Engineering Ltd. 2009
CATALOGUE // 20 19 18 16 17 The Fort Vale Range of Equipment to suit Hydrogen Peroxide Tank Specification 15 14 Fort Vale Engineering Ltd. 2009 THIS PAGE IS INTENTIONALLY BLANK HYDROGEN PEROXIDE EQUIPMENT
CERTIFICATION OF COMPLIANCE OF THE USER S DESIGN SPECIFICATION
CERTIFICATION OF COMPLIANCE OF THE USER S DESIGN SPECIFICATION I, the undersigned, being experienced and competent in the applicable field of design related to pressure vessel requirements relative to
Model MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
Model MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
Ball Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300 DN 40, 50, 65
Data Sheet 819346-02 Issue Date: 05/17 Ball Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300, 50, 65 UNA 45hl MAX, UNA 46hl MAX, UNA 46Ahl MAX UNA 45v MAX with cover for mounting electrode
Serie 06-M6. Swing wafer check valve. made in. Application fields. Check valves E U R O P E WATER CONDITIONING INDUSTRY
Swing wafer check valve BRANDONI made in E U R O P E Application fields WATER CONDITIONING INDUSTRY HEATING 38 www.brandoni.it The valves in series 06 are swing wafer check valves, manufactured in accordance
An example of systems that are inherently excellent applications for the cupronickel product are:
W&O Supply, founded in 1975, is the leading provider of marine piping solutions in the United States. W&O Supply, through its branch locations, distributes and provides services for valves, pipe, fittings,
Vertical Bladder Tanks
DATA SHEET Vertical Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
Model MTB-ASME Horizontal Bladder Tanks
DATA SHEET Model MTB-ASME Horizontal Bladder Tanks Features n UL Listed and FM Approved for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure
Quality Plastic Pipe Fittings. Technical Data. Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed
Quality Plastic Pipe Fittings Technical Data Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed Effective April 1, 2002 PIPE DIMENSIONS IPS-IRON PIPE SIZE Minimum
High-Purity. Ball Valves
High-Purity s Components MANUFACTURING ASSEMBLY TESTING HP High-Purity s CFOS Applications Cost-effective systems where cleaning for oxygen-grade services are required, such as: Clean-Dry Air (CDA), Oil-Free
SLEEVED PLUG VALVES 2-WAY
Specialty Valves 2-WAY ANSI/ASME CLASS 150 LBS Dimensions to ANSI B16.5 & B16.10 1 Six (6) top holes * 2 1/2 valves are made from 3 casting, but flanges are machined to 2 1/2 dimensions 1/2 4.25 108.00
SLEEVED PLUG VALVES 2-WAY
Specialty Valves 2-WAY ANSI/ASME CLASS 150 LBS Dimensions to ANSI B16.5 & B16.10 1 Six (6) top holes * 2 1/2 valves are made from 3 casting, but flanges are machined to 2 1/2 dimensions 1/2 4.25 108.00
Horizontal Bladder Tanks
DATA SHEET Horizontal Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
SAN ANTONIO WATER SYSTEM I.H. 10 Ground Storage Tank Rehabilitation and Painting Project SAWS Job No Solicitation No.
SAN ANTONIO WATER SYSTEM I.H. 10 Ground Storage Tank Rehabilitation and Painting Project SAWS Job No. 13-0118 Solicitation No. B-16-014-GC September 1, 2016 TO BIDDER OF RECORD: The following changes,
LOT DETAILS FOR
FLANGE, BLIND 600# PF&M 516-70N, AAD14 127 UNUSED 18 FLANGE, BLIND 8IN 600# PF&M 516-70N, BNK14 128 UNUSED 12 FLANGE, BLIND 6IN 600# PF&M 516.70N, AAA15 129 UNUSED 3 FLANGE, BLIND 600# PF&M 516.70N, E0A230
Technical data. Back pressure limit: 27.5% of set pressure. Capacity certification: ASME Boiler & Pressure Vessel Code Section I and VIII
VALVES & CONTROLS CROSBY SAFETY VALVES H ig h C a p a c it y, S t e a m S e r v ic e, F la n g e d S t e e l S a f e t y V a lv e Introduction Crosby Style HSL is a full nozzle reaction type safety valve
IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC PURPOSE
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC 157-20067 1 PURPOSE 1.1 The purpose of this standard is to establish an acceptable standard
NAVSEA STANDARD ITEM. 2.2 T9074-AS-GIB-010/271, Requirements for Nondestructive Testing Methods
NAVSEA STANDARD ITEM ITEM NO: 009-53 DATE: 29 JUL 2011 CATEGORY: II 1. SCOPE: 1.1 Title: Bolted Bonnet Steam Valve; repair (shop) 2. REFERENCES: 2.1 S9086-CJ-STM-010/CH-075, Fasteners 2.2 T9074-AS-GIB-010/271,
MSC Guidelines for Refrigeration Machinery
Procedure Number E1-32 Revision Date: 07/27/10 S. J. Kelly, CDR, Chief of Engineering Division References: a. 46 CFR Part 56.50-105 Low Temperature Piping b. 46 CFR Part 58.20 Refrigeration Machinery c.
COMMITTEE DRAFT. API 520 Part I 10 th Edition Ballot Item 2.1. This ballot covers the following item:
This ballot covers the following item: API 520 Part I 10 th Edition Ballot Item 2.1 2008 12 Modify guidance to PRV datasheets (Line 17) to assist user s with determining the temperature to use for selecting
TECHNICAL DATA. Notes: For use with Trim Charts on Pages 2-4
Page 1 of 5 Telephone: 29-95-9501 Technical Services: 877-8-5 Fax: 29-8-0 Email: techsvcs@vikingcorp.com Model F Dry Valve with Trim Valve Size Part Number 17PTR 175PTR 17PTR Standard Trim Sets include
PIPE, VALVE & FITTING
1. 2. 3. 4. Steel Pipe 1.1. Sch. 40 Black T&C 1.2. Sch. 40 Black PE 1.3. Sch. 80 Black PE 1.4. Sch. 40 Galvanized PE Threaded Steel Fittings 2.1. Sch. 40 Black Fittings 2.2. Sch. 80 Black Fittings 2.3.
THE HF-300 SERIES. Operating and Service Manual. Series includes all variants of HF-300/301
THE HF-300 SERIES Operating and Service Manual Series includes all variants of HF-300/301 Issue A July 2015 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 3.1. Spring Loaded...
Telefon (+45) Telefax (+45)
Uni-Valve A /S VENTILER & INSTRUMENTER Telefon (+45) 43 43 82 00 Telefax (+45) 43 43 74 75 mail@uni-valve.com www.uni-valve.com UNI-S83 / S84 3/4-way ball valve Installation and Operating manual 3/4-WAY
Materials : Forged carbon steel A105N
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 2 Female - Female BSP or NPT, Socket Welding - 29 C + 425 C Max Pressure : 136 Bars (Class 800) Specifications : With draining
Inserta Products, Inc.
CODE 6 & 6 -BOLT SPLIT TYPE The INSERTA CODE 6 and CODE 6 -Bolt, Split Flange Type, Modular Connectors, are used in integrated hydraulic systems in place of welded and threaded pipe fittings. These are
Speed control assembly model A-1
Pressure Regulation 533a 1. DESCRIPTION The Viking Speed Control Assembly provides adjustment of the opening speed of Viking Deluge Valves, and adjustment of both the opening and closing speed of Viking
Vertical and Horizontal Bladder Tanks
DATA SHEET Vertical and Horizontal Tanks Application The ANSUL bladder tank is one component in a balanced pressure proportioning system. Its operation requires no external power other than a pressurized
PTF4 Pivotrol Pump (patented) version Dual Mechanism - Pressure Powered Pump
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
DUPLEX TECHNICAL INFORMATION FABRICATED DUPLEX STRAINERS
DUPLEX STRAINER TECHNICAL INFORMATION - 119 - SCREEN OPENINGS 100 Mesh - 30% O.A. 0.006 Openings 80 Mesh - 36% O.A. 0.008 Openings 60 Mesh - 38% O.A. 0.010 Openings 40 Mesh - 41% O.A. 0.016 Openings 30
PVC FASTTAP SADDLES for IPS Mains. Main Size OUTLET 1 FPT 3/4 CTS (7/8 OD) COMPRESSION 1 CTS (1 1/8 OD) COMPRESSION 3/4 IPS COMPRESSION
PVC FASTTAP SADDLES PVC FASTTAP SADDLES for IPS Mains THE ULTIMATE CONNECTION OUTLET 3/4 IPS FEMALE SLIP OR 1 IPS MALE SLIP SOLVENT WELD 1 IPS FEMALE SLIP SOLVENT WELD 3/4 MPT 1 MPT 3/4 FPT MAIN 13/16
GREIG FILTERS, INC. OPERATION MANUAL
GREIG FILTERS, INC. OPERATION MANUAL MODEL DCFH 3P 15/3 100 S4 DOE/222 DUAL CARTRIDGE FILTER HOUSING TABLE OF CONTENTS I. INTRODUCTION II. CARTRIDGE FILTER HOUSING UNIT A. OPERATION B. INSTALLATION C.
Materials : Carbon steel ASTM A216 WCB
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 400 ( NPS 2" to 16" ) Flanges R.F. Class 150 (PN20) - 29 C + 425 C Max Pressure : 20 Bars Specifications : Removable stainless
Fisher 8532 High-Performance Butterfly Valve
Product Bulletin D101552X012 852 Valve Fisher 852 High-Performance Butterfly Valve The Fisher 852 high-performance butterfly valve (figure 1) provides outstanding performance under extreme pressure and
TECHNICAL DATA DELUGE VALVE, MODEL F-1 STRAIGHT THROUGH STYLE
Page 1 of 10 1. DESCRIPTION The Viking Model F-1 Deluge Valve is a quick opening, differential diaphragm and flood valve with one moving mechanism. The Deluge Valve is used to control water flow in Deluge
TECHNICAL DATA. Inlet Type Outlet Type OBSOLETE. 4. TECHNICAL DATA Approvals:
February 11, 2005 Deluge Valves 218 a 1. PRODUCT NAME Viking Model F-1 Deluge Valve 8" - Manufactured since 2002 4" & 6" - Manufactured since 2003 2-1/2" & 3" - Manufactured since 2004 2. MANUFACTURER
SECTION DOMESTIC WATER PIPING
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections
PIP RESP73H Application of ASME B Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process
May 2018 Machinery PIP RESP73H Application of ASME B73.1-2012 Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort
756 Safety Relief Valves
756 S a fe t y R e l i e f Va l ve s INTRODUCTION 756 Safety Relief Valves The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both
SUBMITTAL NOTES PROJECT: Ross Model 50RWR-A Pilot Operated Surge Relief Valve with Hydraulic Anticipation. Size: inch / mm
SUBMITTAL NOTES PROJECT: Ross Model 50RWR-A Pilot Operated Surge Relief Valve with Hydraulic Anticipation Size: inch / mm Every Ross Valve shall be hydrostatically tested for body integrity and tight seating
Series 8R HIGH PERFORMANCE
Triac 8R Series s are the finest quality 3-piece valves on the market. The high quality investment castings feature a fully machined bore. The superior live-loaded packing system is accomplished with Belleville
THE MF-400 SERIES. Operating and Service Manual. Series includes all variants of MF-400/401
THE MF-400 SERIES Operating and Service Manual Series includes all variants of MF-400/401 Issue A October 2013 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 4. Special
(714) Irvine Pipe & Supply, Inc.
STEEL PIPE STEEL STEEL SCHEDULE 40 PIPE TYPE 316 STANDARD LENGTH: 20 (AVAILABLE IN 5 & 10 LENGTHS) SIZE 1/4 #SP62 3/8 #SP63 1/2 #SP65 3/4 #SP67 1 #SP610 1-1/4 #SP612 1-1/2 #SP615 2 #SP620 2-1/2 #SP625
CRP INSTALLATION, OPERATING AND MAINTENANCE INFORMATION FOR INLINE SAMPLING VALVES
CRP INSTALLATION, OPERATING AND MAINTENANCE INFORMATION FOR INLINE SAMPLING VALVES Sampling Valves Installation Commissioning and Operating Instructions SD IL 300 & SD IL 400 Inline Sampling Valve This
NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 33 1000 - WATER DISTRIBUTION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
Huat Siang Hardware Sdn. Bhd. Wire Mesh. Steel Sheet Piles. 1 of 33
Huat Siang Hardware Sdn. Bhd. Wire Mesh Steel Sheet Piles 1 of 33 2 of 33 Rails Purlins 3 of 33 4 of 33 Plates Plates 5 of 33 Hollow Sections HOLLOW SECTIONS SUPPLIER IN MALAYSIA - Huat Siang Hardware
Storage Systems and Accessories
Storage Systems and Accessories High Pressure Air and Inert Gases 4500-6000 PSIG DOT and ASME Cylinders High Pressure Storage Systems If an application requires storage, either in the form of a single
Flange Bolt Torquing. for Resistoflex Plastic-Lined Piping Products. Torquing. Retorquing. Hydrotesting. Annual retorquing
Flange Bolt Torquing for Resistoflex Plastic-Lined Piping Products Torquing When assembling flange connections, always use a full complement of clean, new high strength A193-B7 bolting. If using stainless
Pilot Operated Safety Relief Valves
Pilot Operated Safety Relief Valves Engineering complete solutions Call Us on 01482 619600 The Company Four Key Divisions 1. Relief. Safety Relief. Pressure Reducing & Sustaining Valves. Broady Flow Control
Materials : Forged carbon steel A350 LF2
Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 (NPS 1/2" to 2") Female - Female NPT, Socket Welding - 46 C + 425 C Max Pressure : 250 Bars (Class 1500) Specifications : Rising rotating stem
Installation, Operating and Maintenance Instructions. V914 Cast Iron Flanged Swing Check Valve V914
Installation, Operating and Maintenance Instructions V914 Cast Iron Flanged Swing Check Valve V914 THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC and CE MARKING The Pressure Equipment Regulations 1999 (SI 1999/2001)
Sample Cylinders and Accessories
Sample Cylinders and Accessories SC and MC Series FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 115, 6069 Offenbach am Main, Germany Tel.: +49 69 8900 4498 Fax: +49 69 8900 4495 FITOK, Inc.
2.1 Contractor The company that supplies the hot tap machine and its operating personnel.
RCCE Competence Center Engineering North America Procedure Maintenance Hot Tapping of Piping GS-P-ME-001 Page 1 of 6 Issue March 2010 Supersedes MP-56 1. PURPOSE AND BENEFITS 1.1 To establish a controlled
CLASS D - SENSITIVE LEAK TEST GAS AND BUBBLE METHOD. 1.1 To provide definitive requirements for PNEUMATIC pressure testing of piping systems.
Page 1 of 7 CLASS D - SENSITIVE LEAK TEST GAS AND BUBBLE METHOD 1. SCOPE 1.1 To provide definitive requirements for PNEUMATIC pressure testing of piping systems. 1.2 The piping system as used herein is
5k Slickline Lightweight Pressure Control Equipment 4 ID
5k Slickline Lightweight Pressure Control Equipment 4 ID Table of Contents 5k Slickline Lightweight Pressure Control Equipment 4 ID... 1 Hydraulic Slickline Stuffing Box... 3 Wireline Lubricators... 4
TECHNICAL DATA. Pressure Regulation 531a. April 24, 2009
April 24, 29 Pressure Regulation 531a 1. DESCRIPTION The Viking Regulating Valve is a direct-acting, single-seated, spring-loaded diaphragm valve. When installed as a pilot regulating valve on a Viking
BS Series Basket Strainer
BS Series Basket Strainer Operating, Installation, & Maintenance Manual Corrosion Resistant Fluid and Air Handling Systems. Dated 04-26-12 PRESSURE DROP SIMTECH strainers are engineered to offer the lowest
INSTALLATION, MAINTENANCE & OPERATING INSTRUCTIONS 2-4 REDUCED PORT/ FULL PORT (5700/6700) ANSI CLASS 150/300/600/900/1500/2500 TRUNNION BALL VALVES
PBV-USA,Inc. 12735 Dairy Ashford. Stafford, Texas USA 77477 281-340-5400; 800-256-6193 FAX: 281-340-5499 INDUSTRIAL BALL VALVES IM0 69 April 2001 Rev 9 INSTALLATION, MAINTENANCE & OPERATING INSTRUCTIONS
a pilot sprinkler were to be closed after its initial operation, for example a remote manual control station).
Technical Services: Tel: (800) 8-9 / Fax: (800) 9-00 Model DV- Deluge Valve, Diaphragm Style, -/ thru 8 Inch (DN40 thru DN00), Deluge System Dry Pilot Actuation General Description The Model DV- Deluge
TECHNICAL DATA. Page 1 of 12
Page 1 of 12 1. DESCRIPTION The Viking Regulating Valve is a direct-acting, single-seated, spring-loaded diaphragm valve. When installed as a pilot regulating valve on a Viking Model H or J Flow Control
Welcome to the LESER Seminar, Taipei 28. June Design_of_safety_relief_valves_250804_Cal
Welcome to the LESER Seminar, Taipei 28. June 2006 1 Design of safety relief valves 2 Design of safety valves Target Classification of Pressure Relief Devices General design of Safety Relief valves 3 Design
APCO ARV CLEAN WATER AIR RELEASE VALVES. Model 50A
APCO ARV CLEAN WATER AIR RELEASE VALVES Model 50A Instruction D12013 February 2017 Instructions These instructions provide installation, operation and maintenance information for APCO ARV Clean Water Air
COMPONENTS MANUFACTURING
COMPONENTS MANUFACTURING ASSEMBLY TESTING Manifolds Valex Manifolds PCW, CFOS, UHP Configurations with ball valve, diaphragm valve & bellows valve options Main run lengths up to 24 feet & 12 inch in diameter
Materials : Forged carbon steel A105N
Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 (NPS 1/2" to 2") Socket Welding -29 C + 425 C Max Pressure : 250 Bars (Class 1500) Specifications : Rising stem (OS&Y) Welded bonnet Full bore
Anderson Greenwood Series 93 Positive Pressure POSRV Installation and Maintenance Instructions
Before installation these instructions must be fully read and understood Installation and maintenance instructions for Series 93 Positive Pressure Pilot Operated Safety Relief Valves (POSRV). The intent
Type ACE97. Introduction. Installation. P.E.D. Categories. Specifications. Overpressure Protection. Installation Guide English May 2002
Installation Guide English May 2002 Type ACE97 Introduction This installation guide provides instructions for installation, startup, and adjustment. To receive a copy of the instruction manual, contact
Installation, Operation and Maintenance Manual for Back Pressure Regulator
Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN
SABERINDO PACIF SABERINDO PACIFIC CIFIC SABERINDO PA. A Tyco International Company
CIF A Tyco International Company 1 Foam Concentrate CIF 3% AFFF -UL Listed -UL Canada Listed 6% AFFF 6 parts AFFF concentrate to 94 parts water -UL Listed- Foam Liquid -UL Canada Listed 3% FLUOROPROTEIN
Solenoid valves, two-step on/off Type PMLX REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Solenoid valves, two-step on/off PMLX REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3
Sample C ylinde rs, Acce ssorie s, and O utage Tube s
www.swagelok.com Sample C ylinde rs, cce ssorie s, and O utage s Features Sizes from 10 to 3785 cm 3 (1 gal) Working pressures up to 5000 psig (344 bar) 304L and 316L stainless steel and alloy 400 2 Sample
precision pipe fittings
Precision Pipe Fittings 1 8 to 1 sizes 316 stainless steel, brass, and exotic materials NPT threads HOKE PO Box 4866 Spartanburg, SC 29305-4866 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com Sales-hoke@circor.com
Code 61 4-Bolt Flanges
INDUSRIES D. 730 Eaton ay, Annacis Business Park oll Free 1-800-928-1170 ebsite: www.sealum.com 4-Bolt s O Ring Boss National Pipe hread Socket eld Pipe Socket eld ube Butt eld Pipe Cover Plates Union
WHEATLEY Series 822/820 Swing Check Valve
Document Number: TC003001-12 Revision: 02 WHEATLEY Series 822/820 Swing Check Valve Installation, Operation, and Maintenance Manual TABLE OF CONTENTS BILL OF MATERIALS...3 SCOPE...4 INSTALLATION AND OPERATION
FM Approved - Automatic Water Control Valve as standard deluge valve. No formal approval available for coating. Foam Concentrate
December 6, 2010 Foam 21a 1. Description With Multiple Foam/Water Deluge Systems Supplied by a Bladder Tank, multiple deluge foam risers can be supplied from a single foam concentrate source. Where a bladder
TECHNICAL DATA CAUTION
Page 1 of 12 1. DESCRIPTION The Viking Model C-2 Pilot Pressure Regulating Valve is a direct-acting, single-seated, spring-loaded diaphragm valve. When installed as a pilot regulating valve on a Viking
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
PC3_ and PC4_ Pipeline Connectors
1283050/4 IM-P128-06 ST Issue 4 PC3_ and PC4_ Pipeline Connectors Installation and Maintenance Instructions 1. Safety information 2. Description PC30 shown 3. Installation 4. Welding of pipeline connector
MERCER VALVE SERIES Pilot Operated THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
9500 SERIES Pilot Operated THINK...MERCER FIRST MERCER VALVE MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9500 Series Pilot Operated Product Overview The 9500 Series Safety Relief Valves are State of the
LEAKAGE ACCEPTANCE RATES COMPARISON METAL & SOFT SEATED VALVES ISO 5208/API 598/API 6D/MSS SP-61/FCI 70-2
ADELAIDE BRISBANE PERTH LEAKAGE ACCEPTANCE RATES COMPARISON METAL & SOFT SEATED VALVES ISO 5208/API 598/API 6D/MSS SP-61/FCI 70-2 TESTING & LEAKAGE RATES OVERVIEW From an engineering point of view, almost
29 SERIES - SAFETY VALVE
INDUSTRIES, INC. 29 SERIES - SAFETY VALVE INSTALLATION, OPERATION, & MAINTENANCE Part I Document Number: ES1016-1 Revision Level: A Issued By: David Edmonds Date: 6/20/04 Approved By: Date: 10/4/04 Conbraco