09/17/2007 Copy VISIT THE LIFETIME WEB SITE:

Transcription

1 VISIT THE LIFETIME WEB SITE: IF ASSISTANCE IS NEED, CALL OUR CUSTOMER SERVICE PARTMENT 1 (800) Ext HOURS: 9:00 a.m. to 5:00 p.m. Monday through Friday (Mountain Standard Time) MOL #69527 ASSEMBLY INSTRUCTIONS AND OWNER S MANUAL COMBO DISPLAY 09/17/2007 Copy WARNING Do not allow anyone to climb on or hang from the display or any of the displayed units. Climbing on or hanging from the display could cause it to tip over, resulting in serious personal injuries such as cuts, broken bones, nerve damage, paralysis, brain injury, or death. Failure to comply may also result in property damage. Do not sell display units. Removal of any of the display units could cause the display to become unstable and possibly tip over, resulting in property damage or serious injuries as described above. The instructions must be followed to ensure safe display of the systems. Lifetime Products, Inc. does not assume any liability or responsibility for failure to follow all warnings, cautions and instructions included with display systems. Designated models must be placed in the exact positions shown. Failure to follow all assembly instructions and warnings could result in property damage or serious injuries as described above. Save this instruction in the event that the manufacturer has to be contacted for replacement parts. INSTRUCTION #

2 **A MINIMUM OF TWO ADULTS ARE REQUIRED FOR ASSEMBLY** BEFORE BEGINNING ASSEMBLY Identify and inventory all parts using the checklist boxes on the parts list. If any parts are missing, call our Customer Service Department. SAFETY INSTRUCTIONS Failure to follow these safety instructions may result in serious injury or property damage and will void the warranty. Proper and complete assembly, use and supervision is essential for proper operation and to reduce the risk of accident or injury. A high probability of serious injury exists if this display is not installed, maintained, or operated properly. 2 people are required for assembly. If technical assistance is required, contact the manufacturer. Most injuries are caused by misuse and/or failure to follow instructions. PARTS LIST ID Part # Description Qty RB Black Right Backboard Bracket 1 LB Black Left Backboard Bracket 1 RG Gray Right Backboard Bracket 1 LG Gray Left Backboard Bracket 1 CB Combo Mounting Bracket 2 Display Hardware (HH05900B) DA /2 x 3 Hex Bolt /16 Flange Lock Nut U-Bolt /4 x 2 3/4 Hex Bolt 4 DF /2 Centerlock Nut 4 DG /16 x 1 1/4 Carriage Bolt /4 Centerlock Nut 4 DJ /2 x 2 5/16 Metal Spacer 4 DL /16 x 1 1/2 Hex Bolt 4 DM /16 x 1 1/4 Fender Washer 4 DN /16 Drill Bit 1 HARDWARE IS ACTUAL SIZE (Unless otherwise indicated) DA DL DM DG Tools and Materials Required for Assembly (Not Included) 1. Adjustable Wrench 2. 3/4 Wrenches (2) 3. 3/8 Socket Wrench 4. 7/16 Wrenches (2) 5. 1/2 Wrenches (2) DF DJ

3 STEP 1 a. Separate the two halves of the display unit. Pull Here Pull Here STEP 2 a. If your display was already displaying a Backboard, use the existing holes in the slat walls. If not, use the 5/16 Drill Bit (DN) to drill two holes through each slat wall in the location shown. Use a Combo Mounting Bracket (CB) as a template for where the holes should be drilled. STEP 3 a. Attach a Combo Mounting Bracket (CB) to each slat wall by inserting the 5/16 x 1 1/2 Hex Bolts (DL) through the center holes in the Combo Bracket and the holes drilled in the slat wall. b. Slide a 5/16 x 1 1/4 Fender Washer (DM) over each Bolt and secure with 5/16 Flange Lock Nuts (). DN DL CB DM

4 Attaching the to the display: STEP A a. Hold the Gray Backboard Brackets (LG & RG) together and insert the 5 U-Bolt () included with these instructions. Do not use the 2 1/2 U-Bolt included with the Rotate the U-Bolt so the legs fit into the notches in the Backboard Brackets as shown. b. Place two 1/2 x 2 5/16 Metal Spacers (DJ) in between the Brackets as shown. Insert a 1/4 x 2 3/4 Hex Bolt () through the holes in the Brackets and through each Spacer. Secure with 1/4 Centerlock Nuts (). LG RG LG RG DJ STEP B a. Attach the Rim as shown in Option 1 of the instructions. STEP C a. Bend the Backboard Brackets out so the lower holes line up with the holes in the Backboard. b. Insert a 5/16 x 1 1/4 Carriage Bolt (DG) through each hole in the front of the Backboard and secure with 5/16 Flange Lock Nuts (). DG DG LG RG STEP D a. Attach the Backboard to the Combo Mounting Bracket (attached to the slat wall) with two 1/2 x 3 Hex Bolts (DA) and 1/2 Centerlock Nuts (DF). Back View Continue with Step 4 on Page 6. DF DA DF DA

5 STEP A Attaching the to the display: a. Hold the Black Backboard Brackets (LB & RB) together and insert the 5 U-Bolt (). Rotate the U-Bolt so the legs fit into the notches in the Backboard Brackets as shown. b. Place two 1/2 x 2 5/16 Metal Spacers (DJ) in between the Brackets as shown. Insert a 1/4 x 2 3/4 Hex Bolt () through the holes in the Brackets and through each Spacer. Secure with 1/4 Centerlock Nuts (). RB RB LB LB DJ STEP B a. Attach the Rim as shown in Option 1 of the instructions. STEP C a. Bend the Backboard Brackets out so the top holes line up with the holes in the Backboard. b. Use a 3/8 socket wrench to insert the 5/16 x 1 Screws (HK) (included with the 73621) through the Backboard Brackets and into the Backboard. HK HK LB RB STEP D a. Follow the instructions in step D on the previous page to attach the Backboard to the Combo Mounting Bracket on the other slat wall. Continue with Step 4 on Page 6.

6 STEP 4 a. Slide the two halves of the display unit together.