09/17/2007 Copy VISIT THE LIFETIME WEB SITE:

Size: px
Start display at page:

Download "09/17/2007 Copy VISIT THE LIFETIME WEB SITE:"

Transcription

1 VISIT THE LIFETIME WEB SITE: IF ASSISTANCE IS NEEDED, CALL OUR CUSTOMER SERVICE DEPARTMENT 1 (800) Ext HOURS: 9:00 a.m. to 5:00 p.m. Monday through Friday (Mountain Standard Time) MODEL #69436 ASSELY INSTRUCTIONS WARNING Failure to comply with any of the warnings in these instructions may result in serious personal injuries such as cuts, broken bones, nerve damage, paralysis, brain injury, or death. Failure to comply may also result in property damage. Please heed all warnings and cautions. To ensure your safety, do not attempt to assemble this system without reading and following all instructions carefully. Identify and inventory the parts using the Parts List. DISPLAY 09/17/2007 Copy Save this instruction in the event that the manufacturer has to be contacted for replacement parts. INSTRUCTION #

2 **A NIMUM OF TWO ADULTS ARE REQUIRED FOR ASSELY** SAFETY INSTRUCTIONS Failure to follow these safety instructions may result in serious injury or property damage and will void the warranty. Proper and complete assembly, use and supervision is essential for proper operation and to reduce the risk of accident or injury. A high probability of serious injury exists if this display is not installed, maintained, or operated properly. 2 people are required for assembly. If technical assistance is required, contact the manufacturer. Most injuries are caused by misuse and/or failure to follow instructions. PARTS LIST ID Part # Description Qty ZJ Backboard 1 ZL Backboard 1 ZJ16986 Sliver Fusion Backboard Backboard Reactor Backboard Backboard Backboard 1

3 BEFORE BEGINNING ASSELY Identify and inventory all parts using the checklist boxes on the parts list. Keep the hardware bags and their contents separate. If any parts are missing, call our Customer Service Department. For Board Replacement instructions identify your display below, then go to indicated page. Pg. 4 Pg. 11 Pg. 15 Pg. 21

4 51794 > > > Removing the Backboard & Rim: 2 Remove the Bolt, nut, spacers, and Outer Guard, setting them aside for the Backboard. MF MC MF LB AC RB MC AF AD AG AF Remove the Bolt, nut, And spacers setting them aside for the Backboard. MD 3 MD Lay the Old Backboard (BB) on a bench or table. 4 5 BB MH MH RI RH RK AL Set aside T-Nuts and bolts for the Backboard. save hardware for the Backboard. Save the Plastic Guard (AL), Rim Support Channel () and nuts for the Backboard. RK 4

5 Hardware Key: rk (2) 1 mc (1) ri (1) (Not actual size) 7 1/8 (Not actual length) Lay the New Backboard (BB) on a bench or table. rg (4) Attaching the Backboard & Rim: 2 mh (2) mf (1) 3 md (2) mi (2) BB AL RI RH RK MD MD MH MH Place the Plastic Guard (AL) on the back of the Rim. Tighten the Jam Nuts (RK) onto the U-Bolt as far as they will go. Only hand tighten the Nylock Flange Nuts (). RK Tightening the Nuts () later will adjust the Rim tension. Only hand tighten the Nylock Flange Nuts (). Completely tighten all Rim hardware. 4 5 Make sure the Outer Guard and Adjustment mechanism are aligned correctly. MF MC Tighten the Nut until it is flush with the Bolt. MF LB AC RB MC Tighten the Nut until it is flush with the Bolt. AF AD AG AF 5

6 1 Remove the Bolt (PC) from the Nut Coupler (PI). Removing the Backboard & Rim: 2 3 Remove the Bolts (), Spacers (PA), Nut Coupler (PI) and Rim and set aside for the Backboard. AN AN PI PA PC PA PI Remove the Bolt, Nut and Spacers from the Upper Extension Arms and Backboard Brackets and set aside. 4 5 Lay the Old Backboard (BB) upside-down on a table or bench. Use a 3/8 socket wrench to remove the Screws () in the middle of the Backboard Brackets. AO BB PB Remove the Bolt, Nut and Spacers from the Lower Extension Arms and Backboard Brackets and set aside. Hardware Key: rf (4) pe (2) pa (2) pi (1) (Not actual size) pb (2)

7 Hardware Key: pc (1) 8 pj (2) mn (4) mb (2) (Not actual length) 1 Lay the New Backboard (BB) upside-down on a table or bench. Attaching the Backboard & Rim: 2 Insert the Coupler (PI) 3 into the end of the Outer Sleeve (AV). Tighten the Bolts () (with the nylon patch) through the Backboard Brackets and into the Coupler (PI). RB BB LB PA Use a 3/8 socket wrench to insert the Screws () through the Backboard Brackets. Do not overtighten the Screws. Only tighten them a half turn after the head of the Screw contacts the Backboard Brackets. 4 Insert the Bolt (PC) through the Coupler (PI) and into the Spring assembly. Tightening this Bolt will adjust the Rim tension. 5 PI AV PA PI Tighten the Nuts securely. Tighten the Nut until it is flush with the Bolt. PI AO PB PC

8 Removing the Backboard & Rim: 1 Remove the Springs (AD). AD 2 HI HD HB Use the closed end of a wrench to pull the Springs up and over the Bolt. AK AK Remove the Bolt, Nut and Spacers from the Upper Extension Arms and Backboard Brackets and set aside. 3 4 Lay the Old Backboard (BB) on a table or bench. HH BB HH HD HI HI HB 5 AL AL Remove the Bolt, Nut and Spacers from the Lower Extension Arms and Backboard Brackets and set aside. 6 7 HG HG HH RI RJ RK Remove the Carriage Bolts (HG) from the crimped slot in the Backboard channels. Save hardware for later.

9 Required For This Page: 3/4 Wrenches HD9125B hd hi (2) (4) HH00700 fa (8) hb (2) 7 1/8 (Not actual length) hh (2) Attaching the Backboard & Rim: 1 Lay the Backboard (BB) on a table or bench. 2 HH BB The U-Bolt () goes through the upper holes in the Backboard. 3 Only hand tighten the Nylock Flange Nuts (HH). Place the Plastic Guard (AC) on the back of the Rim. Tighten the Jam Nuts (RK) onto the U-Bolt as far as they will go. RK AC Tightening these Nuts (HH) will adjust the Rim tension. 4 Slide a Carriage Bolt (HG) into the crimped slot in each Backboard channel. HH HG HG RI RJ RK HG

10 5 Bend the Backboard Brackets (LB & RB) out. The lower holes should go over the Carriage Bolts. Do not overtighten the Nuts (HH). HH HH LB RB Completely tighten all Rim hardware. 6 Remove the plastic film from the Backboard. The lip of the Frame Pad overlaps the front of the Backboard. Attach the Center Frame Guard first. Align the small line in the back of the Guard with the seam in the Backboard frame. Use an electric drill to insert the Screws. FC FC FA FB FA FC 7 8 AL Attach this end of the Long Extension Arms (AL) to the Backboard Brackets HI HD HB AK AK HD HI HI HB AK AL AL 10 Tighten the Nut until it is flush with the Bolt.

11 79953 > Removing the Backboard & Rim: 1 At least one person will have to hold the Backboard in front of the Pole while ANother Person UnAttachES the Extension Arms. 2 Remove the Long Extension Arms (PD) from the lower holes in the Backboard. Remove the Short Extension Arms (PC) from the Backboard MG MF MG MG MF MG PC PD PD 3 Lay the Backboard (PH) face up with the Rim holes exposed over the edge of a table. Remove the Frame Pads from the Backboard. FA AU AV FA AW AW 11

12 Remove the Rim from the old 4 5 RA Backboard. PR RJ 6 7 RE RD RE 8 Insert the 4 U-Bolt (RE) through the U-Bolt Washer Plate (PV) and the upper holes in the back of the Backboard. 9 PH RE PO PV 12

13 Hardware Key rf rd ra Attaching the Backboard & Rim: 1 Lay the new Backboard (PH) face up 2 Insert the 4 U-Bolt (RE) through the with the Rim holes exposed over the U-Bolt Washer Plate (PV) and the upper edge of a table. holes in the back of the Backboard. PH RE PO PV Securely tighten the Nuts (). 3 Tighten the Jam Nuts (RD) onto the U-Bolt as far as they will go. 4 5 Tighten the Nylock Flange Nuts () until the Rim is under the desired tension. RD RE RE RJ 6 RA PR 13

14 Hardware Key mf mb mg mi fa 7 Remove the plastic film from the edges of the Backboard where the Frame Pads will be attached. The Frame Pads should overlap the front of the Backboard. AU FA AW AV FA Use an electric drill to insert the Screws (FA). AW 8 At least one person will have to hold the Backboard in front of the Pole while ANother Person attaches it to the Extension Arms. 9 Attach the Short Extension Arms (PC) to the upper holes in the Backboard MF MG MG MG MF MG PC PD PD Attach the Long Extension Arms (PD) to the lower holes in the Backboard. Secure all four Nuts snugly, then back them off 1/4 turn or until the Arms pivot freely. 14

15 51456 > > > Removing the Backboard & Rim: 1 Unattach the Short Extension Arms (AN) from the Backboard. AN AN 2 Unattach the Long Extension Arm (AO) from the Backboard Brackets. AO AO PB 15

16 3 Remove the Bolt (PC) That goes through the Coupler (PI). 4 Remove the Bolts () (with the nylon patch) that run through the Backboard Brackets and into the Coupler (PI). 5 Remove the Coupler (PI) from the end of the Outer Sleeve (AV). PI PC PA PI PA PI 6 PK PK PL 7 8 PF PB PL AV AF Hold the Bolts (PL) with a 3/4 socket wrench while loosening the Nuts Use a 3/8 socket wrench to remove the Screws () From the Backboard Brackets and Backboard Weights (AY). AY Use a 3/8 socket wrench to remove the Screws (). LB RB LB RB 16 AY

17 Hardware Key rf ra rc rf rd 1 Attaching the Backboard & Rim: RB LB Completely tighten the Nuts (RA). RC RC RD RD RA 2 Lay the newbackboard (AR) upside-down on a table or bench. Use a 3/8 socket wrench to insert the Screws () through the holes in the middle of the Backboard Brackets (LB & RB) and into the holes in the Backboard. AR LB RB Do not overtighten the Screws. Only tighten them a half turn after the head of the Screw contacts the Backboard Brackets. 3 Bend the Backboard Brackets (LB & RB) out as shown. AY Use a 3/8 socket wrench to insert the Screws () through the Backboard Brackets and Backboard Weights (AY). Do not overtighten the Screws. Only tighten them a half turn after the head of the Screw contacts the Backboard Brackets and Weights (AY). AY LB RB 17

18 Hardware Key pj pk pb pl pe pf 4 AS 5 6 Insert a 1/2 x 8 Hex Bolt () through the Rim Cover (AF) and the Rim Tail Pieces () to align the holes. Remove the Bolt () after the 1/2 x 7/8 Hex Bolts (PL) are in place. The Rim Tail Pieces () must be oriented as shown. PF Tighten the Nuts securely. Hold the Bolts (PL) with a 3/4 socket wrench while tightening the Nuts. PB AV AF PL PK PK PL AF 7 Insert the Coupler (PI) 8 into the end of the Outer Sleeve (AV). Tighten the Bolts () (with the nylon patch) through the Backboard Brackets and into the Coupler (PI). PA PI AV PI PA Tighten the Nuts securely. 18

19 Hardware Key pc pb mn mb 8 (Not actual length) pj 9 Insert the Bolt (PC) through the Coupler (PI) and into the Spring assembly. Tightening this Bolt will adjust the Rim tension. 10 Tighten the Nut until it is flush with the Bolt. PI AO AO PC PB 11 Tighten the Nut until it is flush with the Bolt. AN AN 19

20 rc rg ri pf ra Removing the Backboard & Rim: 1 2 RA PF PF Remove Rim hardware and save for the Backboard. RC Remove Backboard Bracket hardware and save for the Backboard. RI Attaching the Backboard & Rim: 1 2 Be sure to use both the Rim Support Channel (RC) and Fingerguard (FG). RA PF PF RC RC RI FG Remove Backboard Bracket hardware and save for the Backboard. 20

21 1471 > Removing the 1471 Backboard & Rim: 1 Remove the Spring (AD) from the Spacer between the Backboard Brackets. 2 PG PG PC AF AF 3 4 Lay the Backboard (BA) on a bench or table. PK PK PG PC Use a 3/8 socket wrench to remove the Screws (PK). 21

22 5 RJ RH 6 BA RK AH AL Hardware Key: ri (1) pk (2) (Not actual size) pg (4) pe (2) pc (2) 6 5/8 (Not actual length) rg rk (4) (2) Attaching the Backboard & Rim: 1 Lay the Backboard (BA) on a bench or table. 2 Tighten the Jam Nuts (RK) onto the U-Bolt as far as they will go. 3 PK PK BA AL RJ RH RK Only hand tighten the Nuts (). AH Tightening these Nuts () later will adjust the Rim tension. Only hand tighten the Nuts (). Use a 3/8 socket wrench to attach the Screws (PK) through the top holes in the Backboard Brackets and into the Backboard. Completely tighten all Rim hardware now. 22

23 4 5 PG PG PC AF Tighten the Nut until it is flush with the Bolt. AF PG Tighten the Nut until it is flush with the Bolt. PC 6 Hook the Spring (AD) onto the Spacer between the Backboard Brackets and hook the other end over the Bolt installed in the previous step. AD Use the closed end of a wrench to pull the Springs up and over the Bolt. 23

VISIT THE LIFETIME WEB SITE: **For U.S. and Canada Customers ONLY:** IF ASSISTANCE IS NEEDED,

VISIT THE LIFETIME WEB SITE:   **For U.S. and Canada Customers ONLY:** IF ASSISTANCE IS NEEDED, MODEL #73729 WARNING Failure to comply with any of the warnings in these instructions may result in serious personal injuries such as cuts, broken bones, nerve damage, paralysis, brain injury, or death.

More information

VISIT THE LIFETIME WEB SITE: **U.S. and Canada customers ONLY** IF ASSISTANCE IS NEEDED, COPY

VISIT THE LIFETIME WEB SITE:   **U.S. and Canada customers ONLY** IF ASSISTANCE IS NEEDED, COPY 01/28/2011 VISIT THE LIFETIME WEB SITE: WWW.LIFETIME.COM **U.S. and Canada customers ONLY** IF ASSISTANCE IS NEEDED, DO NOT CONTACT THE STORE!!! CALL OUR CUSTOMER SERVICE DEPARTMENT at 1 (800) 225-3865

More information

COPY. **For U.S. and Canada Customers ONLY:** IF ASSISTANCE IS NEEDED,

COPY.  **For U.S. and Canada Customers ONLY:** IF ASSISTANCE IS NEEDED, MODEL #73729 WARNING Failure to comply with any of the warnings in these instructions may result in serious personal injuries such as cuts, broken bones, nerve damage, paralysis, brain injury, or death.

More information

09/17/2007 Copy VISIT THE LIFETIME WEB SITE:

09/17/2007 Copy VISIT THE LIFETIME WEB SITE: VISIT THE LIFETIME WEB SITE: WWW.LIFETIME.COM IF ASSISTANCE IS NEED, CALL OUR CUSTOMER SERVICE PARTMENT 1 (800) 242-3865 Ext. 1408 HOURS: 9:00 a.m. to 5:00 p.m. Monday through Friday (Mountain Standard

More information

Backboard and Rim Owners Manual

Backboard and Rim Owners Manual REQUIRED TOOLS AND MATERIALS: Two (2) Capable Adults Tape Measure Backboard and Rim Owners Manual Customer Service Center N53 W24700 South Corporate Circle Sussex, WI 53089 U.S.A. Step Ladder - 8ft. (2.4

More information

Universal Elevator Mount Owners Manual Customer Service Center N53 W24700 South Corporate Circle Sussex, WI U.S.A.

Universal Elevator Mount Owners Manual Customer Service Center N53 W24700 South Corporate Circle Sussex, WI U.S.A. REQUIRED TOOLS AND MATERIALS: 2 Capable Adults Carpenter s Level 15 Tape Measure Pencil Universal Elevator Mount Owners Manual Customer Service Center N53 W2400 South Corporate Circle Sussex, WI 530 U.S.A.

More information

InstallatIon and owner s InstrUCtIons

InstallatIon and owner s InstrUCtIons InstallatIon and owner s InstrUCtIons Wall Mount Series Adjustable and Fixed Height Goal Systems table of Contents Safety Instructions... 2 Goal Specifications... 3 Frame Attachment... 4 Frame Assembly

More information

WEIGHT STACK ATTACHMENT. Assembly Manual (888) FOR YOUR SAFETY READ ALL INSTRUCTIONS CAREFULLY

WEIGHT STACK ATTACHMENT. Assembly Manual (888) FOR YOUR SAFETY READ ALL INSTRUCTIONS CAREFULLY WEIGHT STACK ATTACHMENT Assembly Manual DF835 (888) 258-0533 FOR YOUR SAFETY READ ALL INSTRUCTIONS CAREFULLY *NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS

More information

Thank you for purchasing a Porta-Dock product! *Please read and follow these instructions step by step*

Thank you for purchasing a Porta-Dock product! *Please read and follow these instructions step by step* PG 1 OF 9 PORTA-DOCK, INC. 74A ABL/APW 1056 & 44A FLB APW 1056 PORTA-LIFT Thank you for purchasing a Porta-Dock product! *Please read and follow these instructions step by step* STEP 1. Separate and group

More information

Instruction Manual for ZY-021 Height adjustable Acrylic Backboard with Chain net

Instruction Manual for ZY-021 Height adjustable Acrylic Backboard with Chain net Instruction Manual for ZY-021 Height adjustable Acrylic Backboard with Chain net WARNING: IMPROPER INSTALLATION OR SWINGING ON THE RING MAY CAUSE SERIOUS INJURY OR DEATH Notice to assemblers: All basketball

More information

E-trike Li Assembly Guide

E-trike Li Assembly Guide PREPARATION 1. Read this assembly manual BEFORE commencing assembly. 2. Carefully remove all the components and packaged hardware from the shipping boxes. 3. Unpack the contents of the large double box

More information

SERIES 2 RAMP OWNER S MANUAL TOOLS REQUIRED: BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup.

SERIES 2 RAMP OWNER S MANUAL TOOLS REQUIRED: BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup. SERIES 2 RAMP OWNER S MANUAL BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup. Use caution and care for your back when lifting, pushing, pulling, folding or unfolding

More information

VOLLEYBALL SPIKE TRAINER. Assembly Instructions. Owner s Manual. Model # VST-100. Club Volleyball Gear WARNING

VOLLEYBALL SPIKE TRAINER. Assembly Instructions. Owner s Manual. Model # VST-100. Club Volleyball Gear WARNING VOLLEYBALL SPIKE TRAINER Model # VST-100 Assembly Instructions Owner s Manual WARNING To ensure safety, do not attempt to assemble this system without following all instructions carefully. Check entire

More information

Beach Dolly with cradle & keel pad Assembly Instructions

Beach Dolly with cradle & keel pad Assembly Instructions Beach Dolly with cradle & keel pad Assembly Instructions H G B A D C I J L F PART NAME QTY A. AXLE... 1 with tongue bracket and cradle supports attached B. CRADLE SUPPORT BAR... 2 C. TONGUE... 1 D. TONGUE

More information

USER S MANUAL QUESTIONS? CAUTION. Model No. FMEX Serial No. Write the serial number in the space above for reference. Serial Number Decal

USER S MANUAL QUESTIONS? CAUTION. Model No. FMEX Serial No. Write the serial number in the space above for reference. Serial Number Decal Model No. FMEX81110.0 Serial No. Write the serial number in the space above for reference. USER S MANUAL Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, please

More information

Traditional Basketball Set. Assembly & Installation Instructions

Traditional Basketball Set. Assembly & Installation Instructions Traditional & Pro Style Basketball Set Assembly & Installation Instructions Traditional Basketball Set Pro Style Basketball Set 3 0 5 0 S. A L V E R N O N W A Y T U C S O N, A Z 8 5 7 1 3 5 2 0. 7 9 0.

More information

In-Ground Basketball System Owners Manual

In-Ground Basketball System Owners Manual In-Ground Basketball System Owners Manual PLEASE ENSURE that (4) steel spacers are in place between Board Frame and Rim Prior to tightening bolts. (SEE PAGE 15) FAILURE TO FOLLOW OPERATING INSTRUCTIONS

More information

LAT PULLDOWN MACHINE. Assembly Manual (888) FOR YOUR SAFETY READ ALL INSTRUCTIONS CAREFULLY

LAT PULLDOWN MACHINE. Assembly Manual (888) FOR YOUR SAFETY READ ALL INSTRUCTIONS CAREFULLY DF906 LAT PULLDOWN MACHINE Assembly Manual (888) 258-0533 FOR YOUR SAFETY READ ALL INSTRUCTIONS CAREFULLY *NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL

More information

Side-of-Pole Mount for 1 Module (SPM1) For Module Types A & B

Side-of-Pole Mount for 1 Module (SPM1) For Module Types A & B Side-of-Pole Mount for 1 Module (SPM1) For Module Types A & B ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 080311-2 SP3363-1 Side-of-Pole Mount for 1 Module (SPM1)

More information

Soccer Goal. Model: SG20 Series. Installation, Operation and Maintenance Instructions

Soccer Goal. Model: SG20 Series. Installation, Operation and Maintenance Instructions Soccer Goal Model: SG20 Series Installation, Operation and Maintenance Instructions Please read all instructions before attempting installation or operation of these units SAVE THESE INSTRUCTIONS FOR FUTURE

More information

INSTRUCTIONS 360 Y-DROP HAGIE STS 2015

INSTRUCTIONS 360 Y-DROP HAGIE STS 2015 INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INTRODUCTION Before beginning, it s important to know where each mounting bracket fits relative to the row spacing involved. The

More information

2,500/4,000 LB Easy Riser Vertical Cable Feighner Lift

2,500/4,000 LB Easy Riser Vertical Cable Feighner Lift 2,500/4,000 LB Easy Riser Vertical Cable Feighner Lift CAUTION - PUT SAFETY FIRST 1. Before attempting to install or operate this lift, study and fully understand the proper operating procedures and safety

More information

Important Note: Tighten lock nuts so the support tubes still swing freely see figure 2. There must be 1 2 threads of bolt past end of lock nuts.

Important Note: Tighten lock nuts so the support tubes still swing freely see figure 2. There must be 1 2 threads of bolt past end of lock nuts. Kit Contents: DESCRIPTION QTY. DESCRIPTION QTY. 2 Shank Assembly 1 Support Tube Assembly 1 Side Tube - Short 2 1-1/4 Shank 1 Center Tube - Long 1 3/8-16 x 2.0 Carriage Bolt 2 5/16-18 x 2.25 Carriage Bolt

More information

INSTRUCTION GUIDE S-WORKS ROAD CARBON CRANKSET (Carbon and Alloy OSBB cups)

INSTRUCTION GUIDE S-WORKS ROAD CARBON CRANKSET (Carbon and Alloy OSBB cups) INSTRUCTION GUIDE S-WORKS ROAD CARBON CRANKSET (Carbon and Alloy OSBB cups) THIS BRIEF INSTRUCTION GUIDE CONTAINS IMPORTANT INFORMATION. PLEASE READ CAREFULLY AND STORE IN A SAFE PLACE. Congratulations!

More information

TOYOTA TACOMA 2005 TOW HITCH Preparation. Part Number: PT

TOYOTA TACOMA 2005 TOW HITCH Preparation. Part Number: PT Preparation Part Number: PT791 04050 Kit Contents 1 1 Hitch Center Section 2 1 LH Frame bracket 1 RH Frame Bracket 4 2 Auxiliary Bracket Hardware Bag Contents 1 6 Hex Head Bolt, M12 x 1.2 (black) 2 6 Nut,

More information

Detroit Speed, Inc. A-body Rear Coilover Conversion Kit A-body (Moser Rear Axle) P/N: , , , , ,

Detroit Speed, Inc. A-body Rear Coilover Conversion Kit A-body (Moser Rear Axle) P/N: , , , , , Detroit Speed, Inc. A-body Rear Coilover Conversion Kit 1964-1972 A-body (Moser Rear Axle) P/N: 042411, 042412, 042413, 042417, 042418, 042419 The Detroit Speed, Inc. A-body Rear Coilover Conversion Kit

More information

Dual Electronic Basketball System Owners Manual

Dual Electronic Basketball System Owners Manual Dual Electronic Basketball System Owners Manual Customer Service Center N53 W24700 South Corporate Circle Sussex, WI 53089 U.S.A. WARNING! READ AND UNDERSTAND OPERATOR'S MANUAL BEFORE USING THIS UNIT.

More information

MODEL SWH10 1,000 LB CAPACITY SWIVEL HOIST

MODEL SWH10 1,000 LB CAPACITY SWIVEL HOIST MODEL SWH10 1,000 LB CAPACITY SWIVEL HOIST PARTS BREAKDOWN AND OPERATING MANUAL Copyright 2007, Arcan Professional Tools Rev: 05/15/07 This operating manual contains important safety information. Read

More information

INSTRUCTION GUIDE S-WORKS ROAD CARBON CRANKSET (Carbon and Alloy OSBB cups)

INSTRUCTION GUIDE S-WORKS ROAD CARBON CRANKSET (Carbon and Alloy OSBB cups) INSTRUCTION GUIDE S-WORKS ROAD CARBON CRANKSET (Carbon and Alloy OSBB cups) THIS BRIEF INSTRUCTION GUIDE CONTAINS IMPORTANT INFORMATION. PLEASE READ CAREFULLY AND STORE IN A SAFE PLACE. Congratulations!

More information

Marine 6-Boat Free-Standing Racks SKU: Updated November 2011

Marine 6-Boat Free-Standing Racks SKU: Updated November 2011 Marine 6-Boat Free-Standing Racks SKU: 30-061 Updated November 011 Contains: Marine -Boat Free-Standing Racks (SKU 1-003) Marine 3 rd Boat Expansion Racks (SKU 1-0303) Marine Back Legs (SKU -001) 3 Sets

More information

Side-of-Pole Mount for 1 Module (SPM1) For Module Type C

Side-of-Pole Mount for 1 Module (SPM1) For Module Type C Module Type Width Length C 22-27 56-63 Side-of-Pole Mount for 1 Module (SPM1) For Module Type C ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 022212-1 Side-of-Pole Mount

More information

TRAILMATE METEOR ASSEMBLY MANUAL

TRAILMATE METEOR ASSEMBLY MANUAL TRAILMATE METEOR ASSEMBLY MANUAL (DISC BRAKE VERSION) The Trailmate Meteor recumbent has been designed for easy assembly. This means more time to enjoy the smooth ride with single speed, 3 speed coaster

More information

GP100 SERIES ENDURANCE PLAYGROUND SYSTEMS. Installation and Assembly Instructions. Gared Holdings, LLC 9200 E. 146th St. Noblesville, IN 46060

GP100 SERIES ENDURANCE PLAYGROUND SYSTEMS. Installation and Assembly Instructions. Gared Holdings, LLC 9200 E. 146th St. Noblesville, IN 46060 GP100 SERIES 1 OF 16 401754712 B Table of Contents Section Page No. Introduction 2 Cautions and Warnings 3 Parts Checklist 4 Post & Extension Arm Installation 7 Acrylic, Glass, and Perforated Steel Backboard

More information

Cover EX Installation Instructions

Cover EX Installation Instructions Cover EX Installation Instructions 1. Lay out all the parts and verify that they are all present according to the Cover EX Parts and Hardware List. See Fig 1. Call 800-730-7727 for all replacement and

More information

A A A

A A A Mossberg 0 GA Talon T Rear Pistol Grip with Scorpion Recoil System A.5.0.6 A.5.0.6 A.5.0.6 Extended Scorpion Material to Reduce and Discomfort to the Shooter's Hand and Thumb Sure-Grip Texture 70.0.0 Mossberg

More information

Vac Bagger Wheelhorse 42 and 48 Mowers for Classic Garden Tractors

Vac Bagger Wheelhorse 42 and 48 Mowers for Classic Garden Tractors Form No. -80 Vac Bagger Wheelhorse and 8 Mowers for Classic Garden Tractors Model No. 790 000000 & Up Operator s Manual Domestic English (EN) Contents Page Introduction................................

More information

FOLD AND ROLL PLAYBACK TABLE TENNIS TABLE

FOLD AND ROLL PLAYBACK TABLE TENNIS TABLE OWNER'S MANUAL FOLD AND ROLL PLAYBACK TABLE TENNIS TABLE MODEL NOs. T8268 T8168 Thank you for buying our product. We try hard to ensure that our products are of high quality and free of problems, such

More information

C - SERIES. Height Adjustable Portable Goal Supports. Installation & Owner s Instructions C1000 C2000. Made in the USA

C - SERIES. Height Adjustable Portable Goal Supports. Installation & Owner s Instructions C1000 C2000. Made in the USA C - SERIES Height Adjustable Portable Goal Supports C1000 C2000 Installation & Owner s Instructions Made in the USA This manual explains the proper installation, operation, and maintenance of your Schutt

More information

A A A

A A A Winchester SXP Talon T Rear Pistol Grip with Scorpion Recoil Grip A.5.0.65 A.5.0.65 A.5.0.65 Extended Scorpion Material to Reduce and Discomfort to the Shooter's Hand and Thumb Sure-Grip Texture Triton

More information

MID-CUT AND FRONT CUT UNITS

MID-CUT AND FRONT CUT UNITS MID-CUT AND FRONT CUT UNITS Instructional / Parts Manual Part Number: January 00 08 ( 0 & 0 ) & Adapter Kits ( 07, 08, 09, 060, 06 & 06) Table of Contents PROWLER GRASS CATCHER TWO PACKAGED ITEMS LIST

More information

#59114 Rola 2-Bike Rack Carrier (Shown Assembled) (A) (C) (B)

#59114 Rola 2-Bike Rack Carrier (Shown Assembled) (A) (C) (B) Use for Parts: #59114 Rola -Bike Rack System #59115 Rola 1-Bike Add-On TOOLS REQUIRED 10mm or 13/3 Socket & Wrench #59114 Rola -Bike Rack Carrier (Shown Assembled) Tray Attachment Hardware: (3) Plastic

More information

FAX:

FAX: We strive to ensure that our products are of the highest quality and free of manufacturing defects or missing parts. However, if you have any problems with your new product, DO NOT RETURN IT TO THE STORE,

More information

Deluxe Gourd Racks I D E G A. Parts List. Shown above are parts for the two-level, Deluxe Gourd Rack (DGR 12V)with 12 arms for vertically hung gourds.

Deluxe Gourd Racks I D E G A. Parts List. Shown above are parts for the two-level, Deluxe Gourd Rack (DGR 12V)with 12 arms for vertically hung gourds. Deluxe Gourd Racks H F K I D E J C G A Shown above are parts for the two-level, Deluxe Gourd Rack (DGR V)with arms for vertically hung gourds. Parts List Code Quantity A B C D E F G H I J 6, or 4 6, or

More information

RBI Solar One-Piece Ground Mount Solution GM-GS

RBI Solar One-Piece Ground Mount Solution GM-GS Solar Mounting System Installation Guide RBI Solar One-Piece Ground Mount Solution GM-GS Ballasted Ground Mount System RBI Solar 1292 Logan Circle NW Atlanta, GA 30318 513-618-7240 info@rbisolar.com OVERVIEW

More information

VERTICAL SURFBOARD CARRIER READ ME! IMPORTANT WARNING!

VERTICAL SURFBOARD CARRIER READ ME! IMPORTANT WARNING! VERTICAL SURFBOARD CARRIER ENG RRAC09 30 min READ ME! Thank you for purchasing a Front Runner Vertical Surfboard Carrier. Before you start, take a moment to familiarize yourself with this Fitting Instruction

More information

Detroit Speed, Inc. Rear Coilover Conversion Kit Camaro/Firebird P/N: &

Detroit Speed, Inc. Rear Coilover Conversion Kit Camaro/Firebird P/N: & Detroit Speed, Inc. Rear Coilover Conversion Kit 1982-02 Camaro/Firebird P/N: 042440 & 042441 The Detroit Speed Inc., Rear Coilover Conversion Kit allows the latest in coilover spring/shock technology

More information

U.S. Patent No. 7,922,246. Patents Pending

U.S. Patent No. 7,922,246. Patents Pending U.S. Patent No. 7,922,246 Patents Pending 2 Table of Contents Page General Information... 3 Warnings and Cautions... 4 Tools... 6 SmartDock Parts... 6 Initial Set-Up and Adjustment... 7 Select Valve Retaining

More information

Assembly Instructions for the Rolling Harrow and Board Turbo-Till 6/26/03

Assembly Instructions for the Rolling Harrow and Board Turbo-Till 6/26/03 Assembly Instructions for the Rolling Harrow and Board Turbo-Till 6/26/03 Your initial action is to locate the correct drag frame [(61) 589-107H through 589-116H]. Bolt the drag frame to the rear drag

More information

MAGNETIC INDOOR CYCLING BIKE

MAGNETIC INDOOR CYCLING BIKE MAGNETIC INDOOR CYCLING BIKE SF-B1805 USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL

More information

INSTALLATION INSTRUCTIONS A-Arm Guards, Rear Part Number: Application: Kawasaki Brute Force 750 4x4i

INSTALLATION INSTRUCTIONS A-Arm Guards, Rear Part Number: Application: Kawasaki Brute Force 750 4x4i INSTALLATION INSTRUCTIONS A-Arm Guards, Rear Part Number: 88342 Application: 2012+ Kawasaki Brute Force 750 4x4i GENERAL SAFETY PRECAUTIONS Your safety, and the safety of others, is very important. To

More information

8MAY15 US RACK, Inc Falcon Drive, Madera, CA

8MAY15 US RACK, Inc Falcon Drive, Madera, CA 8MAY15 US RACK, Inc. - 2850 Falcon Drive, Madera, CA 93637-559-661-3050 INSTRUCTIONS for Bedrail-mounted MOTORCYCLE RACK, Model 2001-4TRA WARNING: Do NOT attempt to install or use this rack without following

More information

CENTER-STRUT HEIGHT ADJUSTMENT UNITS MANUAL OPERATION

CENTER-STRUT HEIGHT ADJUSTMENT UNITS MANUAL OPERATION ASSEMBLY, INSTALLATION &MAINTENANCE INSTRUCTIONS CENTER-STRUT HEIGHT ADJUSTMENT UNITS MANUAL OPERATION No. 00900-211 and 00900-506 Nylon spacer (2) located between fan backboard support and backboard FAN

More information

VERSA BIKE RACK INSTRUCTIONS

VERSA BIKE RACK INSTRUCTIONS VERSA BIKE RACK INSTRUCTIONS Models #8, 8 Important This rack is designed for use with a or. receiver hitch. The rack is designed to hold a maximum of two bicycles. Do not use it for anything other than

More information

OWNER'S MANUAL LOCK-N-LOAD BULLET FEEDER (PISTOL)

OWNER'S MANUAL LOCK-N-LOAD BULLET FEEDER (PISTOL) OWNER'S MANUAL LOCK-N-LOAD BULLET FEEDER (PISTOL) Table of Contents ASSEMBLY ASSEMBLY Pistol Bullet Feeder... Page 3 CHANGE-OVERS The Hornady Lock-N-Load Pistol Bullet Feeder is capable of feeding most

More information

OWNER'S MANUAL. Copyright 2003 GAMMA - All Rights Reserved

OWNER'S MANUAL. Copyright 2003 GAMMA - All Rights Reserved OWNER'S MANUAL AL Issue 1 - December 2003 Copyright 2003 GAMMA - All Rights Reserved OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2... ASSEMBLY INSTRUCTIONS PAGE 4... MOUNTING THE RACQUET PAGE

More information

Side-of-Pole Mount for 1 Modules (SPM1) For Module Types E, F, G, & H ASSEMBLY INSTRUCTIONS. step-by-step assembly and installation

Side-of-Pole Mount for 1 Modules (SPM1) For Module Types E, F, G, & H ASSEMBLY INSTRUCTIONS. step-by-step assembly and installation Side-of-Pole Mount for 1 Modules (SPM1) For Module Types E, F, G, & H ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A SP3348-1 PCN 022212-2 Side-of-Pole Mount for 1 Module

More information

BHG Sullivan Ridge 10' x 10' steel hard top gazebo with net, steel without E-coat ASSEMBLY INSTRUCTIONS ITEM# BH

BHG Sullivan Ridge 10' x 10' steel hard top gazebo with net, steel without E-coat ASSEMBLY INSTRUCTIONS ITEM# BH HG Sullivan Ridge 10' x 10' steel hard top gazebo with net, steel without E-coat ASSELY NSTRUTONS TE# H17-092-097-23 ATTENTON: THS PRODUT S NOT FOR OERAL USE NTENDED FOR RESDENTAL USE ONLY. Questions,

More information

Concrete Mixer Supply.Com. Section 8

Concrete Mixer Supply.Com. Section 8 Concrete Mixer Supply.Com Section 8 Roller Description McNeilus 3-7/8 Drum Roller McNeilus (MTM) 3-1/4 & 4-1/4 Drum Rollers Smith/London/Oshkosh Drum Roller Rex Drum Roller/Oshkosh-Rex Drum Roller Challenge

More information

SKYBIRD TRAP OWNER S / OPERATOR S MANUAL PARTS AND ASSEMBLY INSTRUCTIONS

SKYBIRD TRAP OWNER S / OPERATOR S MANUAL PARTS AND ASSEMBLY INSTRUCTIONS SKYBIRD TRAP PART NO. 40903 OWNER S / OPERATOR S MANUAL PARTS AND ASSEMBLY INSTRUCTIONS WARNING: THIS MACHINE CAN CAUSE SERIOUS INJURY OR DEATH! THOROUGHLY READ INSTRUCTIONS AND SAFETY INFORMATION BEFORE

More information

-- SGP (NOVA TEAM SQUARE)

-- SGP (NOVA TEAM SQUARE) -- SGP-100 -- (NOVA TEAM SQUARE) Installation Instructions Call Jaypro Sports Equipment at 1-800-243-0533 during regular business hours for technical support. www.jaypro.com Rev-B Page 1 of 9 JAYPRO SPORTS

More information

QUALITY ALUMINUM BOAT LIFTS, INC. INSTRUCTIONS. Dominator Lake Lift

QUALITY ALUMINUM BOAT LIFTS, INC. INSTRUCTIONS. Dominator Lake Lift INSTRUCTIONS Dominator Lake Lift PHONE:251-986-3882 * FAX:251-986-3136 QABLDOMINATORINST.2014 P a g e 1 Quality Aluminum Boat Lifts, INC. Installation Instructions: Dominator Lake Lift Thank you for your

More information

OUTDOOR BACKSTOP WITH 5'-0" EXTENSION

OUTDOOR BACKSTOP WITH 5'-0 EXTENSION INSTALLATION INSTRUCTIONS OUTDOOR BACKSTOP WITH 5'-0" EXTENSION NoUU. 00175- _ READ ALL INSTRUCTIONS THOROUGHLY BEFORE ATTEMPTING TO INSTALL THIS EQUIPMENT. INSTALLATION / ASSEMBLY OF THIS EQUIPMENT MUST

More information

ADJUSTABLE CAMBER PLATE KIT INSTALLATION INSTRUCTIONS PART NUMBER D A

ADJUSTABLE CAMBER PLATE KIT INSTALLATION INSTRUCTIONS PART NUMBER D A ADJUSTABLE CAMBER PLATE KIT INSTALLATION INSTRUCTIONS PART NUMBER D160-0007A APPLICATION: 2014-2016 228i Coupe + xdrive (F22) 2015-2016 228i Convertible+ xdrive (F23) 2017 230i Coupe + xdrive (F22) 2017

More information

T-016 ASSEMBLY MANUAL MODEL ROCK AND ROLL Main Street NE Minneapolis, MN

T-016 ASSEMBLY MANUAL MODEL ROCK AND ROLL Main Street NE Minneapolis, MN MODEL T-016 ASSEMBLY MANUAL ROCK AND ROLL 5280 Main Street NE Minneapolis, MN 55421 1.877.226.7824 www.kurtkinetic.com COMPONENTS Tools Required for Assembly: 17mm Wrench or Adjustable Wrench When unpacking,

More information

Shoreline Cantilever Lift 2500lb Capacity Models: (108" inside width) - Part # (120" inside width) - Part #

Shoreline Cantilever Lift 2500lb Capacity Models: (108 inside width) - Part # (120 inside width) - Part # Shoreline Cantilever Lift 2500lb Capacity Models: 25108 (108" inside width) - Part # 1017402 25120 (120" inside width) - Part # 1017403 1. 2. 3. 4. 5. CAUTION - PUT SAFETY FIRST Before attempting to install

More information

Tread Brake Assembly Instructions

Tread Brake Assembly Instructions reated: 9/06/202, Revision: 2/20/204 Tread rake ssembly Instructions Table of ontents: Lower rake omponents..2-4 able rake ssembly: rake Handle omponents..5-7 able ssembly....8 Tee Handle rake ssembly...9-0

More information

Installation Instructions

Installation Instructions 116-3027, 116-3017 X-Pando Adjustable Steel Protector Installation Instructions 1404 N. Marshall Ave. El Cajon CA. 92020 For technical support call us at (800) 368-3075 NB 6/28/10 607-0112 Step 1. Mounting

More information

Assembly Guide ST200 FUNCTIONAL TRAINER

Assembly Guide ST200 FUNCTIONAL TRAINER Assembly Guide ST200 FUNCTIONAL TRAINER Assembly Guide ST200 FUNCTIONAL TRAINER To avoid possible damage to this Functional Trainer, please follow these assembly steps in the correct order. Before proceeding,

More information

OWNERS MANUAL. Model Shown with optional Primary Mooring Cleats. Portable Mooring System SAFETY OPERATION MAINTENANCE PARTS

OWNERS MANUAL. Model Shown with optional Primary Mooring Cleats. Portable Mooring System SAFETY OPERATION MAINTENANCE PARTS OWNERS MANUAL Model 2400 Shown with optional Primary Mooring Cleats. Portable Mooring System SAFETY OPERATION MAINTENANCE PARTS CAUTION: Before using your new Pier Tender, read rules for Safety, Operation,

More information

ELECTRIC TOOL PARTS LIST

ELECTRIC TOOL PARTS LIST Hitachi Power Tools LIST E933 ELECTRIC TOOL PARTS LIST SLIDE COMPOUND SAW Model 2004 2 13 (E2) 1 2 3 4 5 6 7 40 41 601 8 9 10 11 12 26 27 28 29 30 29 602 618 602 10 9 42 603 604 605 606 607 608 14 43 13

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS KIT CONTENTS: INSTALLATION INSTRUCTIONS PART NUMBER: DESCRIPTION: E361SXA302 roof MOUNT BICycle CARRIER SINGLE Short Carriage Bolt 1x Long Carriage Bolt 3x Over-Molded Wrench 1x Button Head Screw 2x Washer

More information

600 / 600FC OWNER'S MANUAL

600 / 600FC OWNER'S MANUAL PROGRESSION 600 / 600FC OWNER'S MANUAL Issue 2 / Version E - Dec. 10, 1997 Copyright 1997 GAMMA Sports - All Rights Reserved PROGRESSION 600 / 600FC OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY

More information

MAVERICK FOOSBALL TABLE

MAVERICK FOOSBALL TABLE MAVERICK FOOSBALL TABLE Replacement Parts Order direct at or call our Customer Service department at (800) 225-7593 8 am to 5 pm Central Standard Time July 2010 UPC Code 7-19265-53446-4 Staple your receipt

More information

Basketball Instructions

Basketball Instructions Quality Family Games Basketball Instructions Model 752.69 Product Registration 752.69 08/14/14 Visit www.carrom.com to register your product to receive the latest product updates, special offers, and other

More information

Assembly Instructions for the Rolling Harrow and Reel Turbo-Till 6/26/03

Assembly Instructions for the Rolling Harrow and Reel Turbo-Till 6/26/03 Assembly Instructions for the Rolling Harrow and Reel Turbo-Till 6/26/03 Your initial action is to locate the correct drag frame [(61) 589-107H through 589-116H]. Bolt the drag frame to the rear drag plates

More information

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. Drywall Stills DS1830 Max Weight Capacity 225 Lb READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance. Every effort

More information

INSTALLATION AND OWNER S INSTRUCTIONS

INSTALLATION AND OWNER S INSTRUCTIONS INSTALLATION AND OWNER S INSTRUCTIONS Select Series Adjustable and Fixed Height Goal Systems Momentum 60" Momentum 72" TABLE OF CONTENTS www.ballhog.com Safety Instructions... 2 Goal Specifications...

More information

Ref Part Part # Qty Letter A Rudder Catcher B X 1/2 PH Bolts C Rudder Bracket

Ref Part Part # Qty Letter A Rudder Catcher B X 1/2 PH Bolts C Rudder Bracket Ref Part Part # Qty A Rudder Catcher 07.2694.0000 1 J B Q A B 10-32 X 1/2 PH Bolts 07.2136.0000 10 C Rudder Bracket 07.2689.0000 1 D Kayak Pad Eye 01.1315.0430 2 E Cherry Rivets 01.1315.0459 4 H T N P

More information

Booster Pump PB4-60 Replacement Kits

Booster Pump PB4-60 Replacement Kits Booster Pump PB4-60 Replacement Kits FOR YOUR SAFETY - This product must be installed and serviced by a contractor who is licensed and qualified in pool equipment by the jurisdiction in which the product

More information

Instructions. Follow All Instructions Before Assembling Or Using This Product

Instructions. Follow All Instructions Before Assembling Or Using This Product Instructions Follow All Instructions Before Assembling Or Using This Product IMPORTANT DO NOT RETURN THIS PRODUCT TO THE RETAIL STORE WHERE PURCHASED. CALL TOLL FREE: (800) 492-9334 WARNING: Improper use

More information

FIRST TEAM SPORTS, INC Storm Portable Series Assembly Instructions

FIRST TEAM SPORTS, INC Storm Portable Series Assembly Instructions FIRST TEAM SPORTS, INC Storm Portable Series Assembly Instructions WARNING! WARNING! WARNING! THIS BASKETBALL SYSTEM IS SPRING LOADED AND SHIPPED UNDER TENSION. ATTEMPTING TO ASSEMBLE OR DISASSEMBLE ANY

More information

Read Before Operating!

Read Before Operating! Read Before Operating! IMPORTANT OPERATING INSTRUCTIONS THE DEUCE PITCHING MACHINE THROWS REAL REGULATION BALLS; HOWEVER, THE ACCURACY OF THE DEUCE DEPENDS ON THE QUALITY, HARDNESS AND TYPE OF BALLS YOU

More information

602 STRINGING MACHINE OWNER'S MANUAL

602 STRINGING MACHINE OWNER'S MANUAL PROGRESSION 602 STRINGING MACHINE OWNER'S MANUAL AL Issue 1- April 2000 Copyright 2000 GAMMA Sports - All Rights Reserved PROGRESSION 602 STRINGING MACHINE TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2...

More information

Replaces Lesco 300 & 500 Parts

Replaces Lesco 300 & 500 Parts Replaces Lesco 300 & 500 Parts ItemNo R&R PartNo PartNo Description Req. Qty Price R&R Reels Available, Lifetime Guaranteed 1 R502871 020800 R&R Reel, 9 Blade, Fits 300 1 32,100 1 R502871H R&R Only R&R

More information

Final Assembly Instructions Bikes with 16 Wheel Size

Final Assembly Instructions Bikes with 16 Wheel Size Final Assembly Instructions Bikes with 16 Wheel Size Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final assembly. Prior to shipping, our expert

More information

PART NUMBER: E361SXA200 DESCRIPTION: KAYAK CARRIER

PART NUMBER: E361SXA200 DESCRIPTION: KAYAK CARRIER A KIT CONTENTS: : Plug 16x Long Carriage Bolt 4x Hex Key 4x Button Head Screw 4x Pad Strap BASE Over-Molded Wrench 1x SnapAround 4x 1/5 : Important Notes: Minimum crossbar spread of 24". If spread is less

More information

BELT DRIVE INDOOR CYCLING BIKE SF-B1712

BELT DRIVE INDOOR CYCLING BIKE SF-B1712 BELT DRIVE INDOOR CYCLING BIKE SF-B1712 USER MANUAL IMPORTANT! Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service, please contact:

More information

Sunset Swings By Health in Motion, LLC

Sunset Swings By Health in Motion, LLC Sunset Swings By Health in Motion, LLC Model 421 Lounge Swing Assembly and Operation Manual Record Serial Number Here www.sunsetswings.com by Health In Motion, LLC. 1/30/2013 Caution: READ! VERY IMPORTANT

More information

Owner s Manual High Density Sports Storage Partial End Closure Accessory 32-inch Partial End Closure 48-inch Partial End Closure

Owner s Manual High Density Sports Storage Partial End Closure Accessory 32-inch Partial End Closure 48-inch Partial End Closure Owner s Manual High Density Sports Storage Accessory 32-inch 48-inch 48-inch X Cart with CONTENTS Safety........................................................................................ 2 General..................................................................................

More information

Parts & Installation Instructions SV & SV 2 8.5, 9.5 & 10.5 and SVLD 7.5 Snow Plow

Parts & Installation Instructions SV & SV 2 8.5, 9.5 & 10.5 and SVLD 7.5 Snow Plow Form -0 R September 0 Parts & Installation Instructions SV & SV.,. &. and SVLD. Snow Plow Item Part No. Part No. Part No. Part No. Part No. Part No. Qty. Description SVLD. SV. SV. SV. SV. SV. Moldboard

More information

CRUZBIKE Quest 2.0 Assembly

CRUZBIKE Quest 2.0 Assembly CRUZBIKE Quest 2.0 Assembly CRUZBIKE Quest 2.0 Assembly... 1 General notes on assembly... 2 Un box and evaluate the frame and major parts... 2 Unfold the rear swing arm and arrange the frame... 3 Rear

More information

ROCKSOLID DUAL POST ANCHOR

ROCKSOLID DUAL POST ANCHOR ROCKSOLID DUAL POST ANCHOR INSTALLATION INSTRUCTIONS CORPORATE HEADQUARTERS WESTERN SALES AND MANUFACTURING PLANT P.O. Box 400 1017 SW Berg Parkway Canby, Oregon 97013 (503) 266-2231 Fax (503) 266-4334

More information

Big Ride ASSEMBLY AND INSTALLATION INSTRUCTIONS * * C A U T I O N * *

Big Ride ASSEMBLY AND INSTALLATION INSTRUCTIONS * * C A U T I O N * * Big Ride ASSEMBLY AND INSTALLATION INSTRUCTIONS * * C A U T I O N * * S.R. SMITH BIG RIDE SLIDES ARE MANUFACTURED FOR INSTALLATION AND USE ON INGROUND SWIMMING POOLS ONLY. THE BIG RIDE IS NEVER TO BE INSTALLED

More information

FOLD AND ROLL PLAYBACK TABLE TENNIS TABLE

FOLD AND ROLL PLAYBACK TABLE TENNIS TABLE OWNER'S MANUAL FOLD AND ROLL PLAYBACK TABLE TENNIS TABLE MODEL NOs. T8269 T8169 Thank you for buying our product. We try hard to ensure that our products are of high quality and free of problems, such

More information

GRAVITY BIKE RACK ASSEMBLY & OPERATING INSTRUCTIONS

GRAVITY BIKE RACK ASSEMBLY & OPERATING INSTRUCTIONS GRAVITY BIKE RACK 94479 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA 93011

More information

RZR 900 Hitch Mount Plate

RZR 900 Hitch Mount Plate RZR 900 Hitch Mount Plate Polaris RZR 900 2015+ Part #: 5801119 Rev. 031017 491 W. Garfield Ave., Coldwater, MI 49036. Phone: 517-278-7768 E-mail: sales-rtpro@sporttruckusainc.com SAFETY WARNING RT Pro

More information

7130 Lancer Rear Drive Magnetic Commercial Indoor Cycling Bike

7130 Lancer Rear Drive Magnetic Commercial Indoor Cycling Bike 7130 Lancer Rear Drive Magnetic Commercial Indoor Cycling Bike Owner s Manual Made in Taiwan INDEX IMPORTANT SAFETY INFORMATION... 1 EXPLODED DRAWING... 2 PARTS LIST... 3 ASSEMBLY INSTRUCTION... 4-9 USER

More information

White Industries Crank Installation Instructions

White Industries Crank Installation Instructions White Industries Crank Installation Instructions Follow these instructions to install both ENO and VBC crank arms and chain rings. When the ENO crank is installed on a 113x68mm bottom bracket, the Q factor

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS KIT CONTENTS: PART NUMBER: DESCRIPTION: E361SXA300 ROOF MOUNT BICYCLE CARRIER B9 TRIBECA Short Carriage Bolt Long Carriage Bolt 3x Over-Molded Wrench Button Head Screw 2x Washer

More information

ES-701 INSTRUCTIONS FOR USE

ES-701 INSTRUCTIONS FOR USE BIKE ES-701 MANUAL ES-701 INSTRUCTIONS FOR USE 1) The model ES-701 is designed to be used as a group cycle in fitness studios and health clubs. It has a fixed wheel driven flywheel and should only be used

More information