STRAIGHT RUNNING CHAIN. Sideflexing steel gripper chains

PLATE TOP AND GRIPPER CHAINS

PLTE TOP ND GRIPPER CHINS Rexnord has a wide variety of Plate Top and Gripper chains. The roller chain based Plate Top is developed for greater ing capacity and permits even higher speeds and longer runs

Rexnord 815 TableTop Chain

815 DIRECTION OF TRAVEL Drawing 0.12 in (3.1 mm) Overall 1.69 in (42.9 mm) Guide Clearance 1.75 in (44.4 mm) Rexnord 815 TableTop Photo shows 815 TableTop in Stainless Steel (SS) material. Information

Belt strength. Available the belt. (kg/m)

SERIES E50 FLAT TOP Eurobelt Series E50 Flat Top, due to its closed surface, completely flat and smooth, avoids any damage and overturn in the product, as well as the resulting line blockage. It is the

SERIES A24 RAISED RIB

SERIES A24 RAISED RIB Eurobelt Series A24 Raised Rib conveyor belt has been designed mainly to be used with finger plates. It has ribs that, sticking out 6 mm above the module, provide a greater resistance

SERIES E30 RAISED RIB

SERIES E30 RAISED RIB Eurobelt Series E30 Raised Rib conveyor belt has been designed mainly for making product transfers by using finger plates. Due to its smooth surface of projecting ribs, it is recommended

Q Taper Sprockets (For QD Bushings) Mfg. No. Specifications: 40 JA 19 = #40 Chain, JA Bushing Type, 19 Tooth Sprocket

Q Taper Sprockets (For QD s) 40 JA 19 = #40 Chain, JA Type, 19 Tooth Sprocket 64.00001 40JA15 64.00004 40JA16 64.00007 40JA17 64.00010 40JA18 64.00013 40JA19 64.00016 40SH20 64.00019 40SH21 64.00022 40SH22

New Ne w sideflexing BelTs 2555 series

NE 09e New sideflexing BELTS 2 series 1 SIDEFLEXING BELTS PRODUCTION RANGE SERIES MIN. RADIUS/IDTH AVARAGE RATIO PATHS GUIDE SYSTEM APPLICATIONS BELT MATERIAL 2 2T 1, 1, Bidirectional S Bidirectional S

2000-SERIES MODULAR BELTS

2000-SERIES MODULAR BELTS The 2000-series belt is made for heavy duty applications. The pitch is 2 inch. BENEFITS Heavy duty drive The heavy duty positive drive construction provides optimum belt engagement

Sprockets. Section Contents ROLLER CHAIN DRIVES

Sprockets ROLLER CHAIN DRIVES Section Contents General Description... 266-267 Horsepower Ratings Charts... 268-270 Selection Charts... 271-273 MINIATURE CHAIN SPROCKETS Catalog Number Selections/Dimensions...274

Belt strength. Available the belt. (kg/m) PP - Polypropylene 2, to [B] PE - Polyethylene 1, to [B]

SERIES E20 FLAT TOP Eurobelt Series E20 Flat Top, due to a closed surface configuration, is the suitable conveyor belt for those applications in which it is not necessary any drainage through the belt

Conveyor system X85 - links and chains

Conveyor system X85 - links and chains Each link kit contains 10 links, 10 plastic pivots, and 10 stainless steel pins, unless otherwise specified. Plain chain Material abbreviations: see page. X5 X5H

PN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12

PN LINE PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN

CARGO CONTROL Section 09 Page 52

CARGO CONTROL Section 09 Page 52 Ratchet Straps Standard ratchet strap assemblies are made from polyester webbing with a heavy duty steel ratchet. Rhino Straps supply greater durability, strength and abrasion

3/16 Pitch Silent Chain P R E C I S I O N E N G I N E E R E D

3/16 Pitch Silent Chain P R E C I S I O N E N G I N E E R E D Ramsey 3/16 Pitch Chain Constructed from hardened, carbon steel or corrosion resistant, 304 stainless steel, Ramsey 3/16" pitch chain and sprockets

U.S. TSUBAKI BS/DIN ROLLER CHAIN

TSUBAKI BS/DIN ROLLER CHAIN BS/DIN Roller Chain These chains are manufactured to International Standards Organization metric dimensions (ISO 606), British Standard (BS 228), and DIN 8187. They are available

Conveyor system XL - links and chains

Conveyor system XL - links and chains Each link kit contains 10 links, 10 plastic, and 10 stainless steel pins, unless otherwise specified. Material abbreviations: see page 3. Plain chain, standard width

Rexnord 815 TableTop Chain Straight Running

Prefix S SS SSB 815 Cha Information Cha M. Side-flex Radius Approximate desc /ft / m 2-1/4 2. 57. 2 - - 1.43 2.12 2-5/8 2.63 66. 7 - - 1.60 2.37 3-1/4 82. 6 - - 1.84 2.73 4 4.00 101. 6 - - 2.14 17 4-1/2

Sprocket Selection Guidelines

Sprocket Selection Guidelines Table 1 Information Necessary to Order Sprockets 1. Chain Size Number, type, or drawing number of the chain to be used on the sprocket. (The suitability of a sprocket depends

Forestry Chain. Forestry

sec Forest Forestry 11/19/08 9:57 M Page 158 Forestry Renold Jeffrey ngineering lass s for the forestry and paper industries are built to move materials in demanding conditions. Our 81X onveyor s and Welded

Conveyor system XL - links and chains

Conveyor system XL - links and chains Conveyor system XL - links and chains Each link kit contains 10 links, 10 plastic, and 10 stainless steel pins, unless otherwise specified. Material abbreviations:

A&S. More than just a chain.

A&S. More than just a chain. www.renold.com 2 I More than just a chain Renold A&S roller chain has long been recognised for its high quality and affordable reliability. It has earned a strong reputation

Roller Link Plate Pin Link Plate Roller Bushing Pin. Closed type Connecting Link

chain consists of roller links and pin links in series. RIVEE CHAIN COERE CHAIN chain ARS & LINKS. Link late in Link late Bushing in CONNECION OF ROLLER CHAIN Connecting Link Offset Link Spring clip type

Roller Chain and Sprocket Troubleshooting Guide

Roller Chain and Sprocket Troubleshooting Guide Drive System (Roller Chain and Sprockets) Troubleshooting Guide 1. General Chain is riding up on the sprocket. The roller chain and sprocket do not match.

Conveyor system X85, links and chains

Conveyor system X85, links and chains Each link kit contains 10 links, 10 plastic pivots, and 10 stainless steel pins, unless otherwise specified. Material abbreviations: See page III. Introduction Plain

Conveyor system XS - links and chains

Conveyor system XS - links and chains Each link kit contains 10 links, 10 plastic pivots, and 10 stainless steel pins, unless otherwise specified. Material abbreviations: See page III. Introduction Plain

Nitro. Quality Power Transmission Products Division of Belarus Tractor International

Division of Belarus Tractor International Quality Power Transmission Products 800-356-2336 Table of Contents Standard ANSI Single Strand: Page 3 Double Strand: Page 4 Triple Strand: Page 5 Quadruple Strand:

Chain Drives. 1. As no slip takes place during chain drive, hence perfect velocity ratio is obtained

1. Introduction Chain Drives In Belt and Rope drives slipping may occur. In order to avoid slipping, steel chains are used. The chains are made up of a number of rigid links which are hinged together by

PROLINK ENGINEERING MANUAL

EXCERPT FROM PROLINK ENGINEERING MANUAL 01/19 (Ref-No. 888) SERIES 7 Straight running belts 40 mm (1.57 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0 www.forbo-siegling.com,

seal application limit

seal application limit table of content introduction seal-mart product portfolio superior manufacturing concept availability restrictions large diameter seals important guideline for application limit

Conveyor system XM - links and chains

Conveyor system XM - links and chains Each link kit contains 10 links, 10 plastic pivots, and 10 stainless steel pins, unless otherwise specified. Material abbreviations: See page III. Introduction Plain

MADE-TO-ORDER SERIES CHAIN

Specialty/Made-o-Order Attachments Standard Straight and Bent Attachment Chain MAE-O-OE SEIES CAIN S iamond M-35, SA1 S1 (one hole) M-1, S1 S2 (one hole) imensions in Inches WI WO PIC S2 S1 B2 B1 A1 1

Solid Roller stud mount

Solid Roller stud mount 60624 Material, urethane or neoprene bonded to a steel insert. Hardness from 20-80 durometer (Shore A). Technical Notes Bearings included (held in place with snap rings). For more

DEEP WELL SUBMERSIBLE PUMPS. An ISO 9001 & Company

C.R.I. PUMPS DEEP WELL SUBMERSIBLE PUMPS EVERGREEN SERIES - 5Hz An ISO 91 & 141 Company Submersible Pumps C.R.I. Submersible Pumps are the products of the expertise gained from over four decades of experience,

3/16 Pitch Silent Chain P R E C I S I O N E N G I N E E R E D

3/16 Pitch Silent Chain P R E C I S I O N E N G I N E E R E D Ramsey 3/16 Pitch Chain Constructed from corrosion resistant, 304 stainless steel, Ramsey 3/16" pitch chain and sprockets are designed to bring

The Limit Switch with Better Seal, Shock Resistance, and Strength. General-purpose Limit Switch. Model Number Structure

General-purpose Limit Switch CSM_DA-_N_DS_E The Limit Switch with Better Seal, Shock Resistance, and Strength A double seal on the head, a complete gasket cover, and other features ensure a better seal

Excellent sealing in applications that require separation of two different fluids. Low breakout friction and elimination of stick-slip action

PISTON SEAL Double-Acting TECHNICAL DETAILS The Hallite GP2 is a double-acting piston seal utilizing Hallite s proprietary high- performance Armorlene HLX PTFE paired with twin premium o-ring energizers

SKF Transmission chain

SKF ransmission chain Standard and compliance SKF s are manufactured in state of the art facilities. ight quality controls are employed to assure product conformance to the ISO standards and the existing

Terminology. 2 MESH WIRE CLOTH (count from center to center of wires) 1/2 INCH OPENING WIRE CLOTH (clear space between wires)

CALENDERING - A rolling operation which flattens the knuckles of wire cloth giving it a smoother surface. CRIMP - Undulations in warp and fill wires which hold each other in place. FILL WIRE - aka SHUTE

See The Energy Difference!

See The Energy Difference! 125 125 120 115 110 105 100 System Plast Wear Track & NG * Belts Reduce Coefficients of Friction & Energy Consumption 120 115 110 105 100 95 90 85 POUNDS OF FORCE 95 90 85 POUNDS

Hoses and Lances 20,000 PSI

Jetstream provides a full arrangement of hoses and flex lances for ultra high pressure waterblasting. The hoses and lances are designed to be durable and reliable for any 20,000 psi application. A large

September 2016 File:- Maintenance-3

Page 1 September 2016 File:- Maintenance-3 Maintenance - Alignment Page 2 Latch Grease & Assembly.. Page 4 Adjusting Latch Relative to the Snare.. Page 4 Product Numbers & Bar Codes..Page 6 Latch Spare

Cable entries. Contents. Cable entries. Cable entries Introduction L.2 L.1. Standard cable glands - Plastic L.5. Standard cable glands - Brass L.

Contents Introduction.2 Standard cable glands - Plastic.5 Standard cable glands - Brass.7 EMC cable glands.14 Standard cable glands - Stainless steel.16 Cable glands for Ex applications - Brass.17 Adaptors.18

COMPETITION EQUIPMENT. Enjoy the game

COMPETITION EQUIPMENT Enjoy the game Competition Equipment The only board approved by FINA for world championships Powered by DURAFLEX aluminium springboards have been used exclusively in all Olympic diving

Technical information for hinges

451 452 Technical information for hinges In the tables on the following pages are listed a large range of hinge variations. Many more variations are possible if hinges with guide tabs are required i.e.

INTERLOCKED METAL HOSE

INTERLOCKED METAL HOSE HOSE FUNDAMENTALS Penflex interlocked metal hoses are made for a variety of specialized industrial applications and are available in a wide range of metals, styles and sizes. Interlocked

APPLICATION. Conveyors Metal working machines Machines for agriculture Road building machines Mining machinery Food industries

HYDRAULIC APPLICATION Conveyors Metal working machines Machines for agriculture Road building machines Mining machinery Food industries Special vehicles Plastic and rubber machinery etc. CONTENTS Specification

AIR BEARINGS IN HIGH PRECISION SYSTEMS

AIR BEARINGS IN HIGH PRECISION SYSTEMS I. Crăcăoanu 1 and F. Bremer 1 1 Royal Philips Electronics, Philips Innovation Services, Eindhoven, The Netherlands Abstract: In high precision system applications

Cut Protection and Abrasion Sleeves

52 02.4 Cut Protection and Cut Protection Sleeves 54-65 secutex 56-59 NoCut sleeve 58-61 62-63 Buffer Products 64-65 53 02.4 CUT PROTECTION AND ABRASION SLEEVES Cut Protection Sleeves secutex NoCut sleeve

Directional Control Valves Series VA13 and VA15 3- and 5-port valves, G1/8

Directional Control Valves Series VA13 and VA15 3- and 5-port valves, G1/8 Catalogue 9127003472GB-ul VA13 and VA15 Directional Control Valves Robust 3- and 5-port valves with brass bodies and stainless

...vibration isolation. Materials Handling - Rollers

...vibration isolation Materials Handling - Technical Information from Anti-Vibration Components Solid have a smooth surface and a solid body Durasoft have a smooth contact surface with teardrop holes

Related Elevator Products

37 SECTION 2 - Elevator Products Reeving Splices Related Elevator Products Reeving Splice Specifications PIN # Wire Rope Size Units per Carton Wt. per Carton (Lbs) Length (IN) Color Code 1119100012 3/8

BS Conveyor Chain - Hollow Bearing Pin Chain

S onveyor Hollow earing in This chain has all the bearing pin hollow. The hollow bearing type chain gives easy facility for fixing attachments to outer links by bolting through the hollow bearing pins.

Ammeraal Beltech Modular

eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com ontent uni lex ON 15% Open Radius 1.6 page 3-10 Plastic Modular elt Series uni lex ON 15% Open (Radius

Opening Angle 76º 30º [337] 45º 76º 30º [213] 45º 76º 30º [169] 45º 76º 30º [337] 45º 76º 30º [337] 45º 76º 30º [128] 45º 76º 30º [404] 45º 76º 30º

17.22 Picture Force N [lbs] Opening Angle Weight Opening/closure time min 84A3-310000000 84A3X310000000 84A3Y310000000 84A3Z310000000 60º 1,35 84A3-0000000 84A3X0000000 950 84A3Y0000000 [213] 84A3Z0000000

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Conveyor Wear Bed T- Chain Guides and Wear Beds Valu Guide rail can be used as a guide or wear strip for wide

KM/ Stainless steel air bellows Single acting Ø 220 to 400 mm

KM/ Stainless steel air bellows Single acting Ø to mm Stainless steel end plates Frictionless operation No maintenance or lubrication Ideal for short stroke, high-force applications High isolation level

Flattop. Engineering Manual I Pasteurizers, Warmers, Coolers Version 1.1

Flattop Engineering Manual I Pasteurizers, Warmers, Coolers Version 1.1 Safety Considerations PRODUCT SAFETY: Products designed and manufactured by Rexnord are capable of being used in a safe manner; but

Diaphragm Accumulators

Diaphragm Accumulators. DESCRIPTION.. FNCTION Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas is utilised in HYDAC diaphragm accumulators

GROUTING TOOLS SINCE 1974 INNOVATIONS FOR THE TILE SETTING PROFESSIONAL GROUTING TOOLS M2 M3 M4 M5 M6

SINCE 1974 INNOVATIONS FOR THE TILE SETTING PROFESSIONAL M2 M3 M4 M5 M6 ANTIABRASION RUBBER GROUT FLOATS FOAM RUBBER GROUT FLOATS FOAM AND STIFF RUBBER GROUT RAKES / SQUEEGEE FLOAT WITH SCRUB PAD / JOINT

India Mark Handpump. Available Models & OperatingData: Materials of Construction: HANDPUMP. Recommended for water level setting depth (meters)

India Mark Handpump Available Models & OperatingData: Pump Model India Mark II India Mark III India Mark II Extra Deep well Afridev Head 12 to 45 m 12 to 33 m 50 to 85 m 45 m Minimum ID of bore (millimeter)

Position switches FP series

A Position switches FP series Selection diagram 0 08 8 9 0 0 0 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fiber glass rod gasket sphere sphere adjustable lever safety adjustable lever

The SAG type flat, rubber-steel, balance ropes

ROPES The SAG type flat, rubber-steel, balance ropes Application of the SAG ropes: The SAG type, flat, rubber-steel balance ropes, further on called the SAG ropes, are used for shaft transport at mines

Need the part number for an impeller, seal, gasket, or motor? It s all here.

Check here for parts questions Flexible Impeller Reference Guide Service Parts & Kits Service & Warranty Information 92 Need the part number for an impeller, seal, gasket, or motor? It s all here. Highlights:

Air operated diaphragm pumps. Catalogue 2011 rev 1

Air operated diaphragm pumps Catalogue 011 rev 1 General your reliable pumpchoice With experience from industrial fluid handling and pump manufacture since 1970, we know what you as a customer require

OUTER RACE SHIM SPACERS METRIC OUTER RACE SHIM SPACERS. All Dimensions in Millimeters. Material:300 Series Stainless Steel

OUTER RACE SHIM SPACERS Material:300 Series Stainless Steel METRIC OUTER RACE SHIM SPACERS All Dimensions in Millimeters Material:300 Series Stainless Steel 6-16 INNER RACE SHAFT SPACERS 3 /32" To 1 /2"

CHAIN PRODUCTS ALL-MAKES CROSS REFERENCE GUIDE FARM & AGRICULTURAL CONSTRUCTION INDUSTRIAL HEAVY DUTY FARM & AGRICULTURAL EQUIPMENT

CHAIN PRODUCTS ALL-MAKES CROSS REFERENCE GUIDE FARM & AGRICULTURAL CONSTRUCTION INDUSTRIAL HEAVY DUTY FARM & AGRICULTURAL EQUIPMENT PRECISION ROLLER CHAIN The entire range of precision roller chain meets

product & selection guide product & selection guide - 3 rd edition GRIFLEX hose & ducting solutions

GRIFLEX hose & ducting solutions product & selection guide - 3 rd edition 3 rd edition product & selection guide Introduction Griflex has been associated with the hose and ducting industry for over 30

Asphalt Batch Plant Processing

Asphalt atch Plant Processing ngineered for Asphalt Operations www.ustsubaki.com Asphalt Chain www.ustsubaki.com Asphalt is tough! ard aggregates, shock loads, intense heat, and almost around-the-clock

don't print this page!

don't print this page! www.ustsubaki.com Markets and Applications U.S. Tsubaki sprockets are utilized worldwide in many markets and applications, including: Oil and Gas Lumber Mining Primary Metals Material

Wire rope lubrication system. Increases wire rope life and reduces lubrication time, lubricant waste and environmental contamination

Wire rope lubrication system Increases wire rope life and reduces lubrication time, lubricant waste and environmental contamination Importance of lubrication The use of lubricant on a steel wire rope considerably

Specialprofiler / Special profiles

EPDM 30.262S 30.WI660 5 Art. A (mm) B (mm) Hardness Min. order (m) Adhesive 40 30.29168 12 1 SH 65 2.000 X 30.A018615 18,6 1,5 SH 65 30.601 * 65 2,5 SH 65 500 30.600 30 3 SH 65 30.602 50 3 SH 65 30.12932-3

SMOOTH BORE MEDIUM PRESSURE

SMOOTH BORE MEDIUM PRESSURE Smooth Bore Medium Pressure Hose HOSE HOSE HOSE AVERAGE AVERAGE OPERATING BURST BEND WEIGHT PART # CONDUCTIVE SIZE I.D. O.D. PRESSURE PRESSURE RADIUS (LBS/FT) PART # (IN.) (IN.)

Tsubaki Sprocket Capabilities

Tsubaki Sprocket Capabilities Introduction to Made-to-Order Sprockets At Tsubaki, our commitment is to bring you the highest value in the industry today. Period. And as a full line supplier of power transmission

Instruction Manual AC350 GUIDED-TYPE FALL ARRESTER ON RIGID ANCHORAGE LINE EN 353-1:2002

GENERAL CONDITIONS OF UTILIZATION 5 6 7 8 9 - should be filled in by competent person and kept during whole period of the system usage. COMISSION AND FIRST USE - after installation of the working rope

PNEU-THANE K5090, K5094, K5096 Series

REINFORCED AIR & WATER HOSE An extremely lightweight, tough, flexible pneumatic air tool hose that is suitable for a wide range of industrial and construction applications. Tube Clear ether-based polyurethane.

Buna-N design resistant to petroleum products. Buna-S design rated for high strength & abrasion resistance.

HOSES Graco offers a wide selection of low and high pressure hoses in every diameter and length to meet your fluid handling needs for chemical compatibility, strength and abrasion resistance. We also provide

Wheels lie at the heart of nearly every material handling

W HEELS lie at the heart of nearly every material handling system. Improperly specified or poor quality wheels can wreak havoc on the simplest task or a highly complicated system. Fast paced technology

RACING TO PERFORMANCE DETAIL B (11) Ra 3,2

(9) 0,5 X 45 RCING TO PERFORMNCE DETIL B (11) B www.afam.com Ra 3,2 (7) Sprockets 4 FRONT SPROCKETS fam uses the best alloy steel available to produce their front sprockets. Minimum tolerances combined

GS - Parallel Gripper

11: Double acting Patented backlash adjusting system. Long life and reliability, maintenance free. Different options for fastening. Optional magnetic sensors available on page 517. Spring closed (-NC)

CHAIN DRIVE Introduction Merits and demerits of chain drives Merits Demerits

70 CHAIN DRIVE Introduction Chain is used to transmit motion from one shaft to another shaft with the help of sprockets. Chain drives maintain a positive speed ratio between driving and driven components,

TSuBAki SPROCKET SOLUTIONS. SproCkeTS For MAXiMuM performance

TSuBAki SPROCKET SOLUTIONS SproCkeTS For MAXiMuM performance 1 TSUBAKI Sprocket Solutions Made IN JAPAN Tsubakimoto Chain Co. based in Japan is the world s largest chain manufacturer with manufacturing

VACUUM REGULATORS CONTENTS

CAD drawing data catalog is available. ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS Small Regulators Features 759 Specifications, Order Codes, Flow Rate

609W (Dry Cement Delivery) (Specification 3129F, 3129H, 3129L)

1/8" Tube Thickness (3129L) 609W (Dry Cement Delivery) (Specification 3129F, 3129H, 3129L) Per 3 76.2 3.47 88.1 40.28 36.0 914 1.30.59 100 ft. X 3129-0660 $26.01 4 101.6 4.47 113.5 40.28 48.0 1219 1.71.78

Parts Manual HEAVY DUTY RIGHT HAND ARM

Parts Manual HEAVY DUTY RIGHT HAND ARM Thank you for your purchase of a new Labrie. To ensure maximim reliability, on genuine replacement parts. Labrie Plus replacement parts are designed and manufactured

Roughneck TM Mesh Slings

Roughneck TM Slings ROUGHNECK WIRE MESH SLINGS Widely used in metalworking shops and steel warehouses where loads are abrasive, hot or tend to cut web slings Features and Benefits Promotes Safety Steel

LIFTING CHAIN DESIGN FOR TAINTER GATES AND ROLLER GATES

LIFTING CHAIN DESIGN FOR TAINTER GATES AND ROLLER GATES Timothy Paulus, P.E. U.S Army Corps of Engineers, Saint Paul District (651) 290-5530 INTRODUCTION AND SUMMARY This paper is a follow-up to a technical

Fair Winds Boat Repairs, LLC Riberia St. #7 St. Augustine, Fl

Fair Winds Boat Repairs, LLC. 904-669- 6045 134 Riberia St. #7 www.fairwindsboatrepairs.com St. Augustine, Fl 32084 fairwindsboatrepairs@comcast.net INNOVATION ON THE WATER For over 10 years Walker Bay

Cable entries. Contents. Cable entries. Cable entries Introduction C.2 C.1. Standard cable glands - Plastic C.6. Standard cable glands - Brass C.

ontents able entries able entries able entries Introduction.2 Standard cable glands - Plastic.6 Standard cable glands - Brass.9 EM cable glands.15 Standard cable glands - Stainless steel.17 able glands

012018 4 SOCKET SETS MASTER 5 SOCKET SETS 6 SOCKETS INDIVIDUAL & ACCESSORIES 8 RIVET TOOLS 8 AVIATION SNIPS 8 ADJUSTABLE WRENCHES 10 PIPE WRENCHES 10 PLIERS 13 SCREWDRIVERS 15 HEX KEYS 16 STAPLERS &

FLATpak tm Umbilical Coiled Solutions for Artificial Lift Applications

FLATpak tm Umbilical Coiled Solutions for Artificial Lift Applications What is the FLATpak tm Why was it developed Advantages of using FLATpak tm What are the components How is FLATpak tm made Original

Chain Drives ELEMEN MESIN II

Chain Drives ELEMEN MESIN II Introduction Belt and rope drives slipping may occur To avoid slipping Chains The chains are made up of number of rigid links which are hinged together by pin joints in order

Industrial Hose Products

Industrial Hose Products QRG 4800 Quick Reference Guide Your Job. Our Hose. Your Job. Our Hose. No matter what the application, Parker Industrial Hose Products provide proven hose systems designed to efficiently

Proven Design, Performance & Reliability

FLYING SAIL FURLERS Proven Design, Performance & Reliability Ronstan s Flying Sail Furlers have been developed over recent years for use by some of the world s top racing syndicates. Encouraged by their

HYDRALECTRIC LIMITED,

Description:...2 Applications:...2 General Performance Data:...2 Pressure:...3 General Construction Data:...4 Dimensioning:...4 Hose Data:...4 Ferrule Data:...5 Standards:...5 Installation:... Chemical

TBV-CM. Combined control & balancing valves for small terminal units For modulating control NPT threads

TBV-CM Combined control & balancing valves for small terminal units For modulating control NPT threads IMI TA / Control valves / TBV-CM TBV-CM Designed for use in terminal units in heating and cooling

Air operated diaphragm pumps. Catalogue 2011 rev 1

Air operated diaphragm pumps Catalogue 011 rev 1 General your reliable pumpchoice With experience from industrial fluid handling and pump manufacture since 19, we know what you as a customer require from

Braided Lacing Tapes

Braided Lacing Tapes Type I - Braided Nylon Lacing Tape (A-A-52080 MIL-T-43435) TECHFLEX PART #LT1-S1-FA-NT Temperature: -67F to 250F (-55C to 121C). Discolors at 300F(148C). Melts at 480F(248C). Colors:

Telescopic winch handle Speedfriend"

Winch handles, jib furlers JIB FURLERS - WINCH HANDLES - SPREADER COVERS 57 Floating winch handles Floating universal size winch handles Fitted with "Lock In" winch system; universal size for any winch;

CUT AND WEAR PROTECTION

CUT AND WEAR PROTECTION Selection of Products protection products need to be used in applications where sling damage can occur. Cutting of synthetic slings during use is the number one cause of sling accidents.

Materials : Electro galvanized steel flanges

Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 Flanges PN10/16-10 C + 100 C for EPDM and + 80 C for NBR Max Pressure : 16 Bars up to DN 300 Specifications : Absorb vibrations and noises