Hardened Steel Washers

Size: px
Start display at page:

Download "Hardened Steel Washers"

Transcription

1 USS (Type A Wide) Flat Washers Hardened Steel Washers Grade 8 S.A.E. Dimensions American Standard Lbs. Per No./Pcs. Gauge M Pcs. Per Lb. 3/16 9/16 1/4 18 (3/64) /4 3/4 5/16 16 (1/16) /16 7/8 3/8 14 (5/64) /8 1 7/16 14 (5/64) /16 1-1/4 1/2 14 (5/64) /2 1-3/8 9/16 12 (7/64) /16 1-1/2 5/8 12 (7/64) /8 1-3/4 11/16 10 (9/64) /4 2 13/16 9 (5/32) /8 2-1/4 15/16 8 (11/64) /2 1-1/16 8 (11/64) /8 2-3/4 1-1/4 8 (11/64) / /8 8 (11/64) /8 3-1/4 1-1/2 7 (3/16) /2 3-1/2 1-5/8 7 (3/16) /8 3-3/4 1-3/4 7 (3/16) / /8 7 (3/16) /8 4-1/4 2 7 (3/16) /2 2-1/8 7 (3/16) /4 4-3/4 2-3/8 5 (7/32) / /8 4 (15/64) /4 5-1/4 2-7/8 3 (1/4) /2 3-1/8 2 (5/32) S.A.E. (Type A Narrow) Flat Washers American Standard Lbs. Per No./Pcs. Gauge M Pcs. Per Lb. 4 5/16 1/8 21 (1/32) /8 5/32 18 (3/64) /16 3/16 18 (3/64) /16 1/2 7/32 18 (3/64) /16 1/4 16 (1/16) /4 5/8 9/32 16 (1/16) /16 11/16 11/32 16 (1/16) /8 13/16 13/32 16 (1/16) /16 59/64 15/32 16 (1/16) /2 1-1/16 17/32 13 (3/32) /16 1-3/16 19/32 13 (3/32) /8 1-5/16 21/32 13 (3/32) /4 1-1/2 13/16 10 (9/64) /8 1-3/4 15/16 10 (9/64) /16 10 (9/64) /8 2-1/4 1-3/16 10 (9/64) /4 2-1/2 1-5/16 9 (5/32) /8 2-3/4 1-7/16 9 (5/32) / /16 9 (5/32) Lbs. Per M Pcs. 1/4 5/8 9/32.055/ /16 11/16 11/32.055/ /8 13/16 13/32.055/ /16 59/64 15/32.055/ /2 1-1/16 17/32.097/ /16 1-3/16 19/32.097/ /8 1-5/16 21/32.122/ /4 1-15/32 13/16.122/ /8 1-3/4 15/16.136/ /16.136/ /8 2-1/4 1-1/4.136/ /4 2-1/2 1-3/8.136/ /8 2-3/4 1-1/2.136/ / /8.136/ /4 3-3/8 1-7/8.178/ /4 2-1/8.178/ (300 Series) Stainless Steel Washers Dia. In. Dia. In. Wt. Per M Pcs. 1/ / / / / / / / / Fender Washers Bolt Size Dia. In. Dia. In. 10 7/32 1 1/4 9/32 1 1/4 9/32 1-1/4 1/4 9/32 1-1/2 5/16 11/32 1-1/4 5/16 11/32 1-1/2 3/8 13/32 1-1/4 3/8 13/32 1-1/2 1/2 17/32 2 No. in 20 # 1.4M 1.5M.92M.62M.96M.64M.94M.66M.38M 430 Visit us on the EBNinc.com

2 F436 Hardened SAE Flat Washers Structural Super 9 SAE Flat Washers 1/ / / / / / / / Hardened USS Flat Washers 1/4 9/32 5/ /16 11/32 11/ /8 13/32 13/ /16 15/32 59/ /2 17/32 1-1/ /16 19/32 1-3/ /8 21/32 1-5/ /4 13/16 1-1/ /8 15/16 1-3/ / /8 1-1/4 2-1/ /4 1-3/8 2-1/ /2 1-5/ Super 9 USS Flat Washers Basic Diameter Diameter Diameter 1/4 5/16 3/4.055/.072 5/16 3/8 7/8.064/ 3/8 7/ / 7/16 1/2 1-1/4.064/ 1/2 9/16 1-3/8.097/.121 9/16 5/8 1-1/2.097/.121 5/8 21/32 1-3/4.122/.146 3/4 13/ /.146 7/8 15/16 2-1/4.136/ /16 2-1/2.136/ /8 1-1/4 2-3/4.136/ /4 1-3/ / /8 1-1/2 3-1/4.136/ /2 1-5/8 3-1/2.136/.160 1/4 5/16 3/ /16 3/8 7/ /8 7/ /16 1/2 1-1/ /2 9/16 1-3/ /16 5/8 1-1/ /8 11/16 1-3/ /4 13/ /8 15/16 2-1/ /16 2-1/ /18 1-1/4 2-3/ /4 1-3/ /2 1-5/8 3-1/ Visit us on the EBNinc.com 431

3 Split Lock Washers (Medium and Heavy) A B T W Nominal Mean Sect. Washer Diameter Diameter Section Size (T + I) Width 2 Max. Min. Med. Max. Heavy Max. Med. Min. Heavy Min. Med. Min. Heavy Min / / / / / / / / / / / / / / / / / / / / Hi Collar Split Lock Washers A B T W Inside Diameter Outside Mean Section Section Basic Diameter Width Washer Size Max. Min. Max. Min. Min. # # # # # / / / / / / / / / / / / / / / / Countersunk Finishing Washers Basic Outside Inside Diameter Screw Size Diameter Min. Max. # # # # / Visit us on the EBNinc.com

4 Malleable Bevel Washers External Tooth Lock Washers D T Side Inside Center Basic Dimension Diameter Bolt Size Min. ±0.03 Max. ±0.03 Min. ±0.03 ±0.03 Nominal 1/ / / / / / / / / / / Hardened Bevel Washers Nominal Inside Diameter Outside Diameter / / / / / / Internal External Tooth Lock Washers A I.D. T Side Inside Mean Taper in Basic Dimension Diameter Bolt Size Min. Nominal Inches 1/2 1-3/4 17/32 5/ /8 1-3/4 11/16 5/ /4 1-3/4 13/16 5/ /8 1-3/4 15/16 5/ /4 1-1/8 5/ /8 2-1/4 1-1/4 5/ /4 2-1/4 1-3/8 5/ /8 2-1/4 1-1/2 5/ /2 2-1/4 1-5/8 5/ Internal Tooth Lock Washers Nominal Inside Diameter Outside Diameter / Direct Tension Indicator Washer (For A325 Bolt) Nominal Inside Diameter Outside Diameter / / / / / / /8 Pipe Outside Inside Number of Diameter Diameter Protrusions Basic w/out w/protrusion Equally Diameter Min. Max. Min. Max. protrusion Min. Max. Spaced 1/2 1-1/8 1-3/16 17/32 9/ /8 1-5/16 1-3/8 21/32 11/ /4 1-9/16 1-5/8 25/32 13/ /8 1-13/16 1-7/8 29/32 15/ / /32 1-1/ /8 2-1/16 2-1/8 1-11/ / /4 2-3/16 2-1/4 1-19/ / /8 2-7/16 2-1/2 1-29/ / /2 2-11/16 2-3/4 1-37/ / Visit us on the EBNinc.com 433

5 Direct Tension Indicator Washer (For A490 Bolt) Outside Inside Number of Diameter Diameter Protrusions Basic w/out w/protrusion equally Diameter Min. Max. Min. Max. protrusion min. Max. spaced 1/2 1-5/16 1-3/8 17/32 9/ /8 1-9/16 1-5/8 21/32 11/ /4 1-11/16 1-3/4 25/32 13/ /8 1-15/ /32 15/ /16 2-1/4 1-1/32 1-1/ /8 2-7/16 2-1/2 1-11/ / /4 2-11/16 2-3/4 1-19/ / /8 2-15/ / / /2 3-3/16 3-1/4 1-37/ / Series Socket Head Cap Screws Suggested Tightening Torques & Dimensions D A H S J Nominal Tightening Size Head Hexagon Torque Or Basic Body Head Head Side Socket Screw Diameter Diameter Height Height Size Diameter Max. Min Max. Min. Max. Min. Min. Nom. UNRC UNRF (in.-lb.) / / / / / / / / / / (ft.-lb.) 5/ / / / / / / / / / / / / / / / / / Tensile Strength{ 0 thru 1/ ,000 psi min 5/8-above...170,000 psi min Material (A) Alloy Steel conforming in all respects to ASTM A 574. Heat treated to Rockwell "C" for.500 In. and smaller, and for.625 In. and larger. (B) Corrosion-Resistant shall conform in all respects to ASTM F837. Suggested Tightening Torques For Other Alloy Socket Screw Products (in.-lbs.) Button Head Button Head Flat Head Low Head Shoulder Screws Basic Flat Head Max. Max. Max. Max. Nominal Screw Hex Tightening Tightening Hex Tightening Hex Tightening Size Size Key Size Torque Torque Key Size Torque Key Size Torque / / / / / / / / / / /8 50 5/ / / / / / / / / / / / / / / / / / / / / / / Visit us on the EBNinc.com

A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32

A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32 A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32 Component Flat Washers Component Flat Washers The Largest Selection in the World! Steel, Stainless Steel and Brass The standard Flatwasher

More information

TABLE OF CONTENTS. Throughout the catalog you will notice blue highlighted items. These are the most frequently ordered BURNDY Products.

TABLE OF CONTENTS. Throughout the catalog you will notice blue highlighted items. These are the most frequently ordered BURNDY Products. BURNDY Products Hardware TABLE OF CONTENTS DURIUM Hardware Bolts............................ D-2 Nuts............................. D-3 Flat Washer....................... D-3 Split Lockwasher...................

More information

TorqBolt Wedge Anchors Torque Controlled Expansion Anchor

TorqBolt Wedge Anchors Torque Controlled Expansion Anchor TorqBolt Wedge Anchors Torque Controlled Expansion Anchor Product Description The Torqbolt wedge anchor is a torque-controlled, wedge expansion anchor for heavy duty fastening applications where high pull

More information

Rated to the New, Higher Pressure Classes in Latest Editions of AWWA C900 and C909. Joint Restraint Products INFORMATION FEATURES & ADVANTAGES

Rated to the New, Higher Pressure Classes in Latest Editions of AWWA C900 and C909. Joint Restraint Products INFORMATION FEATURES & ADVANTAGES Pipe Restrainers series 1000G2 1000G2C Restrainers for AWWA CI OD C900/C909 PVC/PVCO Pipe with MJ or Ductile Iron Push-On Fittings (Formerly Series 9000) INFORMATION Second Generation (Gen 2) PVC Restrainers

More information

Anchor Component Material Standard Mechanical Properties

Anchor Component Material Standard Mechanical Properties SECTION 4.1 PAGE 1 / 5 l description The UCAN sleeve anchor is a light-medium duty anchor ideal for applications in concrete, hollow block and brick. It is a mechanical expansion anchor assembled with

More information

THREADED ROD & ACCESSORIES. Superior strength, maximum versatility.

THREADED ROD & ACCESSORIES. Superior strength, maximum versatility. Superior strength, maximum versatility. GRTRBRO 12/2013 Threaded rod is used for general purpose fastening and installation. Used in any place that a long bolt is required, threaded rod can be cut to the

More information

Inserta Products, Inc.

Inserta Products, Inc. CODE 6 & 6 -BOLT SPLIT TYPE The INSERTA CODE 6 and CODE 6 -Bolt, Split Flange Type, Modular Connectors, are used in integrated hydraulic systems in place of welded and threaded pipe fittings. These are

More information

Torque Specifications

Torque Specifications SENR3130-10 Torque Specifications All Caterpillar Products S/N From the library of Barrington Diesel Club CONTENT General Information 01/07/2005 Introduction to Torque 01/07/2005 Torque-Turn 01/07/2005

More information

Ford Service Saddles and Tapping Sleeves

Ford Service Saddles and Tapping Sleeves Section AA 5/2001 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487

More information

Sprocket Selection Guidelines

Sprocket Selection Guidelines Sprocket Selection Guidelines Table 1 Information Necessary to Order Sprockets 1. Chain Size Number, type, or drawing number of the chain to be used on the sprocket. (The suitability of a sprocket depends

More information

WEDGE-ALL Wedge Anchors

WEDGE-ALL Wedge Anchors WEDGE-ALL Wedge Anchors The Wedge-All wedge anchors are a non-bottom bearing, wedge-style expansion anchor for use in solid concrete or grout-fi lled masonry. A one-piece clip ensures uniform holding capacity

More information

l DESCRIPTION l FEATURES l LIMITATIONS l TYPICAL APPLICATIONS l MATERIAL SPECIFICATIONS TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6

l DESCRIPTION l FEATURES l LIMITATIONS l TYPICAL APPLICATIONS l MATERIAL SPECIFICATIONS TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6 www.ucanfast.com TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6 l DESCRIPTION The UCAN WAG anchor is a fully threaded torque controlled expansion anchor assembled with a three segment expansion clip. All parts

More information

IBS, INCORPORATED Index Washers W A S H E R S. Washers, Lock Alloy C-8 External Tooth C-10. Internal Tooth C-10

IBS, INCORPORATED Index Washers W A S H E R S. Washers, Lock Alloy C-8 External Tooth C-10. Internal Tooth C-10 IB, INCOPOTD Index ashers ssortments Flat asher Copper C-11 Fender asher C-9 eavy Duty C-5 Lock asher Internal & xternal tar asher C-10 ur-lock Vibration-esistant ashers C-7 Back-Up ashers luminum ound

More information

300lb MALLEABLE FITTINGS

300lb MALLEABLE FITTINGS NIPPLES & FITTINGS MLLEBLE FITTINGS MLLEBLE FITTINGS MLLEBLE FITTINGS ISO 9002 - CERTIFICTE OF QULITY - UL/ LISTED ND PPROVED T 300 PSI Our quality fittings are made with care and attention to detail.

More information

OUTER RACE SHIM SPACERS METRIC OUTER RACE SHIM SPACERS. All Dimensions in Millimeters. Material:300 Series Stainless Steel

OUTER RACE SHIM SPACERS METRIC OUTER RACE SHIM SPACERS. All Dimensions in Millimeters. Material:300 Series Stainless Steel OUTER RACE SHIM SPACERS Material:300 Series Stainless Steel METRIC OUTER RACE SHIM SPACERS All Dimensions in Millimeters Material:300 Series Stainless Steel 6-16 INNER RACE SHAFT SPACERS 3 /32" To 1 /2"

More information

80 SERIES MOBILE-KARRIERS. The Specialist In Drum Handling Equipment OPERATOR S MANUAL FOR MORSE 80 SERIES

80 SERIES MOBILE-KARRIERS. The Specialist In Drum Handling Equipment OPERATOR S MANUAL FOR MORSE 80 SERIES OPERATOR S MANUAL FOR MORSE Model 80A and 80A-M for 55 gallon standard steel drums (22½ diameter) Model 80C for steel or fiber drums (21-23 diameter) Model 80i for 55 gallon steel drum (22-½ diameter).

More information

Submittal / Substitution Request

Submittal / Substitution Request Submittal / Substitution Request SUBMITTED TO: To: Firm: Project: Submitted Product: SIMPSON STRONG-TIE WEDGE-ALL WEDGE ANCHOR Specified Product: Section: Page: Detail/Sheet No.: Description of Application:

More information

COMPRESSION TUBE FITTINGS

COMPRESSION TUBE FITTINGS COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe LET-LOK HOW DOES IT WORK? A HAM-LET has gained an

More information

PTR Series Track Roller Assembly Plain/Cylindrical Stud Type Concentric Ball & Tapered Roller Bearings

PTR Series Track Roller Assembly Plain/Cylindrical Stud Type Concentric Ball & Tapered Roller Bearings PTR Series Assembly A B C D F FL H SD SL T Width Hex Width + PTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 0.5 0.03 0.78 PTR-1.125 1.125 0.75 0.437 1.00 7/16-20 0.50 3/16 0.5 0.03 0.78 PTR-1.25 1.250

More information

SpeciÞcations. Engine Dimensions Dimensions in millimeters. Inch equivalents shown in [].

SpeciÞcations. Engine Dimensions Dimensions in millimeters. Inch equivalents shown in []. SpeciÞcations Engine Dimensions Dimensions in millimeters. Inch equivalents shown in []. Ê ßÔ Ê ÛÝ Ñ Ê Û ÎÊ Û É 5 ENGINE IDENTIFICATION NUMBERS Kohler engine identiþcation numbers (model, speciþcation

More information

BARRIER OFFSET 0" A 6" 6" A 12" 12" A 26" A 26" 3A OR 4A L OR S * ** L OR S L OR S

BARRIER OFFSET 0 A 6 6 A 12 12 A 26 A 26 3A OR 4A L OR S * ** L OR S L OR S ACCEPTABLE (TCB) TYPES AND ANCHORING DETAILS BASED ON UNDERLYING SURFACE TYPE AND BARRIER OFFSET FROM DROP-OFF BARRIER OFFSET UNDERLYING SURFACE 0" A 6" 6" A 12" 12" A 26" A 26" TCB TYPE DETAIL TCB TYPE

More information

Series SFD. Clean Air Filter. Variations. Made to Order. Type. Cartridge (replaceable element) Disposable (non-replaceable element) Up to 100

Series SFD. Clean Air Filter. Variations. Made to Order. Type. Cartridge (replaceable element) Disposable (non-replaceable element) Up to 100 Clean Air Filter Variations SFD SFD SFD SFD Made to Order Type Disposable (non-replaceable element) Cartridge (replaceable element) Flow rate L/min (ANR) (at inlet pressure.7 MPa) Up to 6 Up to 8 Up to

More information

DP Spare parts list. Demolition pulverizer. DP 2800 s/n DEQ Construction Tools GmbH No

DP Spare parts list. Demolition pulverizer. DP 2800 s/n DEQ Construction Tools GmbH No DP 2800 Spare parts list Demolition pulverizer DP 2800 s/n DEQ139266-2018 Construction Tools GmbH No. 3390719501 2018-01-01 General information This spare parts list applies to the following: Part number

More information

FASTENERS, CLAMPS & STRAPS

FASTENERS, CLAMPS & STRAPS Bands...169 Buckles...170 Cable Ties...171 Clip, Ring & Pin Kits...168 Clips, Rings & Pins...168 Hose Clamps...170,171 Screw Anchor Expanders...168 Strap Tensioners & Adaptors...172 Tie Wire...172 Tie

More information

World Area Differences Technical Information

World Area Differences Technical Information World Area Differences Technical Information DMISC2047X02 This document is to give more information about the following: Porting & Threads Cleaning Procedures Conversion Tables PORTING & THREADS NPT (National

More information

GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS

GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS CONTINENTAL INDUSTRIES, INC. The Ultimate Connection CONTINENTAL INDUSTRIES, INC. ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, Inc.,

More information

Supplementary instructions. Rod and cable components. for VEGAFLEX series 80. Document ID: 44968

Supplementary instructions. Rod and cable components. for VEGAFLEX series 80. Document ID: 44968 Supplementary instructions Rod and cable components for VEGAFEX series 80 Document ID: 44968 Contents Contents 1 Product description 1.1 Extensions... 3 2 Mounting 2.1 General instructions... 6 2.2 Rod

More information

FITTING IDENTIFICATION AMERICANT THREAD TYPES APPENDIX ALFAGOMMA // APPENDIX. Dash numers. NPTF (National Pipe Tapered Fuel)

FITTING IDENTIFICATION AMERICANT THREAD TYPES APPENDIX ALFAGOMMA // APPENDIX. Dash numers. NPTF (National Pipe Tapered Fuel) // FITTINGS GUIDelines FITTING IDENTIFICATION numers Most fluid piping system sizes are measured by dash numbers. These are universally used abbreviations for the size of component expressed as the numerator

More information

VTRE Series Track Roller Assembly V-Grooved Stud Type Eccentric Ball & Tapered Roller Bearings

VTRE Series Track Roller Assembly V-Grooved Stud Type Eccentric Ball & Tapered Roller Bearings VTRE Series Track Assembly V-Grooved Type entric Ball & Tapered Bearings VTRE-3.50E A B C D ED EL EO F FL G H P SD SL T Type Track Width Dia -.002 Offset Groove Center Hex Point Shoulder Shoulder Width

More information

Side-of-Pole Mount for 1 Module (SPM1) For Module Type C

Side-of-Pole Mount for 1 Module (SPM1) For Module Type C Module Type Width Length C 22-27 56-63 Side-of-Pole Mount for 1 Module (SPM1) For Module Type C ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 022212-1 Side-of-Pole Mount

More information

SEALED CONNECTORS FOR THE LIMIT SWITCHES

SEALED CONNECTORS FOR THE LIMIT SWITCHES SEALED CONNECTORS FOR THE LIMIT SWITCHES LIST OF MODELS / Sealed connectors are used at the cable-connecting section of limit switches. Type and appearance Materials Features Target market Applications

More information

ASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.

ASYBCO 90 O ELBOW LONG RADIUS O.D. I.D. 90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds

More information

Installation Instructions MODEL VSTI-A020 Tank Indicator Installation Model: VSTI-A020, Stainless Reverse Read System Versa Steel Inc. Guide Cables No

Installation Instructions MODEL VSTI-A020 Tank Indicator Installation Model: VSTI-A020, Stainless Reverse Read System Versa Steel Inc. Guide Cables No Tank Indicator Installation Model: VSTI-A020, Stainless Reverse Read System Guide Cables No Guide Cables 1 August 4, 2011 Assembly Instructions: (Shown with a 2 board, 12 ft kit) ITEM NO. PART NUMBER DESCRIPTION

More information

Technical Manual. Stand 05/2011

Technical Manual. Stand 05/2011 MULTI-MONTI Technical Manual Stan5/2011 Technical Manual HECO-MULTI-MONTI Contents Instructions for fixing P. 3 Chapter 1 : Admissible loads in as well as P. 4 anchor-characteristics for MMS-6 to MMS-16

More information

PTRE Series Track Roller Assembly Plain/Cylindrical Stud Type Eccentric Ball & Tapered Roller Bearings

PTRE Series Track Roller Assembly Plain/Cylindrical Stud Type Eccentric Ball & Tapered Roller Bearings PTRE Series Assembly A B C D ED EL EO F FL H SD SL T -.001 Width Dia -.002 Offset Hex Shld Width + PTRE-1.00 1.000 0.75 0.437 1.00 0.625 0.48 0.03 7/16-20 0.52 3/16 0.7 0.03 0.78 PTRE-1.125 1.125 0.75

More information

COMPFIRE CCFT-FP_550_55_ September 2010 Fin Plate Connection to Circular Concrete-Filled Tube Test Result

COMPFIRE CCFT-FP_550_55_ September 2010 Fin Plate Connection to Circular Concrete-Filled Tube Test Result Reaction Frame Macalloy Bars Camera 3 Support Beam α Oven Bar Camera 2 Link Bar Camera 1 Tested Connection Jack Bar Electrical Furnace Reaction Frame Load Jack v2_5 April 2011 1 Oven Bar Link Bar View

More information

ALCOA FASTENING SYSTEMS INDUSTRIAL FASTENER DIVISION TEST REPORT IDT # 175. Performance of 5/8 Huck 360 Fasteners,

ALCOA FASTENING SYSTEMS INDUSTRIAL FASTENER DIVISION TEST REPORT IDT # 175. Performance of 5/8 Huck 360 Fasteners, ALCOA FASTENING SYSTEMS INDUSTRIAL FASTENER DIVISION TEST REPORT IDT # 175 July 5 th, 2012 Performance of 5/8 Huck 360 Fasteners, and Comparison to Other Nuts and Bolts WRITTEN BY: Larry Mercer, Product

More information

Tapped Hole (.375) Tapped hole 15 (.594) (.391±.004) Frame 19±0.2 (.750±.008) 12.7±0.2 (.500±.008) 19±0.2 (.750±.008) R S 4 x Ø 5.4 (.

Tapped Hole (.375) Tapped hole 15 (.594) (.391±.004) Frame 19±0.2 (.750±.008) 12.7±0.2 (.500±.008) 19±0.2 (.750±.008) R S 4 x Ø 5.4 (. 434 Lift-off In-line Zinc can also be 31.5 19.1 (.750) For Lift-Off For on Lift-Off 1300 (300 lbf) 2200 (500 lbf) 56 T.P.I. (2.21) 31.5 19.1 (.750) Tapped hole Ø 9.5 (.375) ultimate 3300 (750 lbf) 9300

More information

MILITARY SPECIFICATION SHEET SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CORROSION RESISTANT STEEL, UNC-2A

MILITARY SPECIFICATION SHEET SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CORROSION RESISTANT STEEL, UNC-2A INCH-POUND MS19D April 199 Superseding MS19C 18 July 198 MILITARY SPECIFICATION SHEET SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CORROSION RESISTANT STEEL, UNC-A This specification is approved for use by

More information

MILITARY SPECIFICATION SHEET SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CORROSION RESISTANT STEEL, UNC-2A

MILITARY SPECIFICATION SHEET SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CORROSION RESISTANT STEEL, UNC-2A INCH-POUND MS19D April 199 Superseding MS19C 18 July 198 MILITARY SPECIFICATION SHEET SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CORROSION RESISTANT STEEL, UNC-A This specification is approved for use by

More information

IBS, INCORPORATED Index

IBS, INCORPORATED Index ex uts Assortments Machine crew ized uts & Washers B-2 Miscellaneous uts Machine crew uts, Wing uts & Cap uts Assortmen B-2 Fasteners Cap uts B-10 Coupling uts B-11 Flange uts tover B-5 eavy ex uts B-10

More information

Continental Industries TRANSITION FITTINGS or FAX Visit

Continental Industries TRANSITION FITTINGS or FAX Visit Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and

More information

FTR Series Track Roller Assembly Flanged Stud Type Concentric Ball & Tapered Roller Bearings

FTR Series Track Roller Assembly Flanged Stud Type Concentric Ball & Tapered Roller Bearings FTR Series Track Assembly d Type Concentric Ball & Tapered Bearings Type Track A B C D F FL H L M SD SL T Hex Dia + FTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 1.38 0.22 0.5 0.03 0.78 FTR-1.125 1.125

More information

VERTICAL BLADDER TANK

VERTICAL BLADDER TANK Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Tight Spaces UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure

More information

COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC

COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC 1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC LET-LOK TUBE FITTINGS DESCRIPTION HAM-LET LET-LOK HOW DOES IT WORK? HAM-LET LET-LOK LET-LOK LET-LOK HAM-LET LET-LOK 1 4 3 2 4 Tube 1 2 3 1 2 3 4 6 LET-LOK

More information

These products are available only in packs of 100 pieces

These products are available only in packs of 100 pieces NYLON CABLE TIES SPECIFICATION Kompress Cable Ties are produced to comply with the requirements of Military Specification MIL-S 23190E and supplied in accordance with our ISO 9001 accreditation. They have

More information

HORIZONTAL BLADDER TANK

HORIZONTAL BLADDER TANK Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Low Ceilings UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure

More information

Over twenty years of experience, engineering expertise. and dynamic growth has given PENCOM. as one of the foremost global suppliers to the fastener

Over twenty years of experience, engineering expertise. and dynamic growth has given PENCOM. as one of the foremost global suppliers to the fastener SCREW BOOK Over twenty years of experience, engineering expertise and dynamic growth has given PENCOM the reputation as one of the foremost global suppliers to the fastener industry. PENCOM prides itself

More information

Full Service Warehouse

Full Service Warehouse DIRECT FAX (320) 235-1816 110 19th Street NW P.O. Box 1178 Willmar, Minnesota 56201 (320) 235-4070 1-800-992-8853 1-800-328-8994 Full Service Warehouse 3-D LASER SHEARING BREAKING FLAME CUTTING PLASMA

More information

// ADapters GUIDelines

// ADapters GUIDelines // ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall

More information

MULTI-MONTI Technical manual

MULTI-MONTI Technical manual MUTI-MONTI Technical manual Version 01/2017 Technical manual MUTI-MONTI Content Instructions for fixing P. 3 Chapter 1: Admissible loads in as well as P. 4 anchor characteristics for MMS-6 to MMS-16 1.1

More information

HP10168 & HP10169 KITS HP10152 / HP10154 / HP10156

HP10168 & HP10169 KITS HP10152 / HP10154 / HP10156 HP10168/&HP10154 HP10169/KITS HP10152 HP10156 HP10152: 2" AMP Air Suspension Spacer Kit Ford F-450 Pickup 2WD & 4WD HP10154: 4" AMP Air Suspension Spacer Kit Ford F-450 Pickup 2WD & 4WD HP10156: 6" AMP

More information

4400 TwinHybrid Gas Seal

4400 TwinHybrid Gas Seal 4400 TwinHybrid Gas Seal EQUIPMENT PREPARATION MECHANICAL SEAL INSTALLATION INSTRUCTIONS 1 2 200.005" 0,13 mm 125 µ" 3,2 µm R a 3 4 32 µ" 0,8 µm R a 1000 ±.002" 0,05mm CAUTIONS These instructions are general

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Model No. Description RP2300FC, RP2301FC Router CONCEPT AND MAIN APPLICATIONS Models RP2300FC and RP2301FC are upgraded sister tools of our current plunge-type electronic router Model

More information

COMPRESSION TUBE FITTINGS

COMPRESSION TUBE FITTINGS COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe fittings in various materials for high pressure applications

More information

Quality Plastic Pipe Fittings. Technical Data. Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed

Quality Plastic Pipe Fittings. Technical Data. Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed Quality Plastic Pipe Fittings Technical Data Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed Effective April 1, 2002 PIPE DIMENSIONS IPS-IRON PIPE SIZE Minimum

More information

Directional Valves. Hydraulic Operated Directional Valves

Directional Valves. Hydraulic Operated Directional Valves Service Data Vickers Directional Valves Hydraulic Operated Directional Valves (F*) DG3V 8 (B) ** (L) (X) (*) (*) 10 (EN**) Released 04/96 5007.03/EN/0496/S DG3V-8-*(C) - (X) - 10 Spring Centered 473726

More information

Q Taper Sprockets (For QD Bushings) Mfg. No. Specifications: 40 JA 19 = #40 Chain, JA Bushing Type, 19 Tooth Sprocket

Q Taper Sprockets (For QD Bushings) Mfg. No. Specifications: 40 JA 19 = #40 Chain, JA Bushing Type, 19 Tooth Sprocket Q Taper Sprockets (For QD s) 40 JA 19 = #40 Chain, JA Type, 19 Tooth Sprocket 64.00001 40JA15 64.00004 40JA16 64.00007 40JA17 64.00010 40JA18 64.00013 40JA19 64.00016 40SH20 64.00019 40SH21 64.00022 40SH22

More information

Casing Spacer Technology Leaders

Casing Spacer Technology Leaders Casing Spacer Technology Leaders Benefit today. Save down the line. www.racispacers.com NORTH AMERICA Why Raci Raci has been the global leader in casing spacer technology since 1952. Our uniquely designed,

More information

MUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.

MUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5. Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read

More information

2-3/8 REG JM-4 $1,536 RM-4 $1, /4 REG JM-3 $1,536 RM-3 $1, /8 REG JM-8 $1,827 RM-8 $2,268 TM-8 $3,177 Add $610 $640 $640 $640

2-3/8 REG JM-4 $1,536 RM-4 $1, /4 REG JM-3 $1,536 RM-3 $1, /8 REG JM-8 $1,827 RM-8 $2,268 TM-8 $3,177 Add $610 $640 $640 $640 MILLING TOOLS Mill Size O.D. 2-1/4-2-1/2 2-5/8-2-3/4 2-7/8-3-1/8 3-1/4-3-5/8 3-3/4-4-1/4 4-3/8-4-5/8-4-3/4 4-7/8-5 1-1/4 JM-1 $1,395 RM-1 $1,817 1-1/4 JM-2 $1,536 RM-2 $1,921 1-1/4 JM-3 $1,536 RM-3 $1,921

More information

Model MTB-ASME Horizontal Bladder Tanks

Model MTB-ASME Horizontal Bladder Tanks DATA SHEET Model MTB-ASME Horizontal Bladder Tanks Features n UL Listed and FM Approved for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure

More information

VK/VP SERIES : Sealless Vertical Pump. Assembling Instructions 2010

VK/VP SERIES : Sealless Vertical Pump. Assembling Instructions 2010 VK/VP SERIES : Sealless Vertical Pump Assembling Instructions 2010 20610 Manhattan Place Suite 116 Torrance, CA 90501 Phone: 310-328-9114 Fax: 310-328-9441 1. Motor Shaft and Pump Base (1) (2) Place a

More information

DEADBOLT SETS, MECHANICAL FEATURES

DEADBOLT SETS, MECHANICAL FEATURES , MECHANICAL FEATURES 8000 SERIES LOW PROFILE CYLINDER DEADBOLT FOR 1 5 8 (41mm) DOOR PREP All deadbolts feature a ½ low-profile cylinder projection. CASE: Deadbolt case is formed of heavy gauge steel

More information

OMS Technical Information Technical data

OMS Technical Information Technical data Technical data TECHNICAL DATA FOR OMS Type OMS OMS OMS OMS OMS OMS OMS OMS OMS OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSS OMSS OMSS OMSS OMSS OMSS OMSS OMSS OMSS Motor size 80 100 125 160 200 250

More information

Operator s/parts Manual

Operator s/parts Manual Operator s/parts Manual 24 & 30 Folding No-Till Drill Harrow Manufacturing, Inc. P.O. Box 5060 Salina, Kansas 67402-5060! Read the Operator s manual entirely. When you see this symbol, the subsequent instructions

More information

Horizontal Bladder Tanks

Horizontal Bladder Tanks DATA SHEET Horizontal Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)

More information

NAVSEA STANDARD ITEM. 2.2 T9074-AS-GIB-010/271, Requirements for Nondestructive Testing Methods

NAVSEA STANDARD ITEM. 2.2 T9074-AS-GIB-010/271, Requirements for Nondestructive Testing Methods NAVSEA STANDARD ITEM ITEM NO: 009-53 DATE: 29 JUL 2011 CATEGORY: II 1. SCOPE: 1.1 Title: Bolted Bonnet Steam Valve; repair (shop) 2. REFERENCES: 2.1 S9086-CJ-STM-010/CH-075, Fasteners 2.2 T9074-AS-GIB-010/271,

More information

Tech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) MODEL D INFLATABLE JACKS

Tech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) MODEL D INFLATABLE JACKS SPX Corporation 5885 11th Street Rockford, IL 6119-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (8) 477-8326 Fax: (8) 765-8326 Order Entry: (8) 541-1418 Fax: (8) 288-731 Parts List

More information

Channel Nuts & Hardware

Channel Nuts & Hardware Channel Nuts Channel nuts are one of the main components of our strut system. It is designed to provide essential gripping power and ease during installation. Channel nuts are press formed, machined and

More information

Vickers. Flow Controls. Flow Controls FN, F(C)G, FRG. Released 6/94

Vickers. Flow Controls. Flow Controls FN, F(C)G, FRG. Released 6/94 Vickers Flow Controls Flow Controls FN, F(C)G, FRG Released 6/94 685 Table of Contents FN03/06/10 Model Series Application Data...............................................................................

More information

1000/13.02 KOBSERT. Thread inserts for metals

1000/13.02 KOBSERT. Thread inserts for metals 1000/13.02 KOBSERT Thread inserts for metals Contents KOBSERT Thread inserts for metals Page The principle 3 The benefits 3 Product types 3 Applications in the Automotive and General industry 4 Technical

More information

STA-F Description. STA-F Prefab insulation Measuring nipples

STA-F Description. STA-F Prefab insulation Measuring nipples TA STA-F 5-5-1 5 Balancing valves September 1985 STA-F is a flanged balancing valve available in sizes DN 20-300, and has been designed with an oblique seat in order to give low resistance and large flows

More information

Standard Specifications

Standard Specifications NARM, 2 Ways of Connection Small Size Pressure Gauge ø5mm Reverse flow function available on the standard model Space Saving -B2 NARM-6A-NG Standard Specifications Fluid Proof pressure psig (MPa) Max.

More information

Tsubaki Sprocket Capabilities

Tsubaki Sprocket Capabilities Tsubaki Sprocket Capabilities Introduction to Made-to-Order Sprockets At Tsubaki, our commitment is to bring you the highest value in the industry today. Period. And as a full line supplier of power transmission

More information

MANUAL SEALLESS STEEL STRAPPING TOOL MODEL A

MANUAL SEALLESS STEEL STRAPPING TOOL MODEL A OPERATION MANUAL / SPARE PARTS LIST MANUAL SEALLESS STEEL STRAPPING TOOL MODEL A337.0001 13.1912.01 13191201.en/MAS/ 10.02 INDEX PAGE 1 SAFETY INSTRUCTIONS 2 2 WARRANTY CONDITIONS AND LIABILITY 4 3 APPROPRIATE

More information

Fraser Bronze Alloy LG2 - BRONZE. Mechanical Properties (Typical) Continuous Cast Centrifugal Cast

Fraser Bronze Alloy LG2 - BRONZE. Mechanical Properties (Typical) Continuous Cast Centrifugal Cast Fraser Bronze Alloy LG2 - BRONZE Bronze Bushing Product Information Sheet - LG2 A. W. Fraser Alloy LG2 is a general puspose leaded gunmetal conforming to the requirements of B.S. 1400-1985 Alloy LG2. LG2

More information

ENGINEERING DESIGN GUIDE. D-M-E Hydraulic Unscrewing Device

ENGINEERING DESIGN GUIDE. D-M-E Hydraulic Unscrewing Device ENGINEERING DESIGN GUIDE D-M-E Hydraulic Unscrewing Device ENGINEERING DESIGN GUIDE D-M-E Hydraulic Unscrewing Device Hydraulic Unscrewing Device Without guiding thread with cam Safety Considerations Mold

More information

Coiling Tube with Twist-Proof Fitting

Coiling Tube with Twist-Proof Fitting http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Anti-Twisting Coiling Tube for Air Tool Coiling Tube with Twist-Proof Fitting 306 Avoid Twisted Tube Problem

More information

MUELLER. A A Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.

MUELLER. A A Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3. Installation Instructions manual MUELLER table of contents PAGE A-20806 A-20807 Adjustable General Information 2 Technical Data 3 Dimensions 4 Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator

More information

SB 52. Spare parts list. Hydraulic breakers. SB 52 s/n BES Construction Tools PC AB No j

SB 52. Spare parts list. Hydraulic breakers. SB 52 s/n BES Construction Tools PC AB No j SB 52 Spare parts list Hydraulic breakers SB 52 s/n BES043707 2018 Construction Tools PC AB No. 9800069301j 2018-01 General information This spare parts list applies to the following: Part number 8460030010

More information

Ball Float Steam Trap UNA 43 PN 16/CL 125/JIS 10K UNA 46 PN 40/CL 150/CL 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6"

Ball Float Steam Trap UNA 43 PN 16/CL 125/JIS 10K UNA 46 PN 40/CL 150/CL 300/JIS 10K/JIS 20K DN 80, 100, 150, 3, 4, 6 Data Sheet 819584-00 Issue Date: 01/17 Ball Float Steam Trap UNA 43 PN 16/C 125/JIS 10K UNA 46 PN 40/C 150/C 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6" UNA 43 hl, UNA 46 hl UNA 43 v, UNA 46 v with

More information

Nitro. Quality Power Transmission Products Division of Belarus Tractor International

Nitro. Quality Power Transmission Products Division of Belarus Tractor International Division of Belarus Tractor International Quality Power Transmission Products 800-356-2336 Table of Contents Standard ANSI Single Strand: Page 3 Double Strand: Page 4 Triple Strand: Page 5 Quadruple Strand:

More information

GENERAL INFORMATION & REFERENCE SPECIFICATIONS

GENERAL INFORMATION & REFERENCE SPECIFICATIONS GENERAL INFORMATION & REFERENCE SPECIFICATIONS FLAT WASHER AVAILABILITY - The flat washers listed in this catalog represent only a small portion of the many that are available. The Anillo inventory contains

More information

Related Elevator Products

Related Elevator Products 37 SECTION 2 - Elevator Products Reeving Splices Related Elevator Products Reeving Splice Specifications PIN # Wire Rope Size Units per Carton Wt. per Carton (Lbs) Length (IN) Color Code 1119100012 3/8

More information

Operating Procedures for 10 through 24 GripTight MAX High Pressure Test Plug

Operating Procedures for 10 through 24 GripTight MAX High Pressure Test Plug EST Group DC2562 06/16 REV 2 03/18 Page 1 of 11 Operating Procedures for 10 through 24 GripTight MAX High Pressure Test Plug Curtiss Wright Proprietary This document is the property of and contains information

More information

WELL COMPLETION & PROTECTION. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD

WELL COMPLETION & PROTECTION. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD WELL COMPLETION & PROTECTION MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com WELL COMPLETION & PROTECTION TABLE OF CONTENTS TABLE OF CONTENTS (FLUSHMOUNTS)... 2-5 MONITORING

More information

Series 44 Self-operated Pressure Regulators. Type 44-0 B Pressure Reducing Valve. ANSI version

Series 44 Self-operated Pressure Regulators. Type 44-0 B Pressure Reducing Valve. ANSI version Series 44 Self-operated Pressure Regulators Type 44-0 B Pressure Reducing Valve ANSI version Application Set points from 3 to 290 psi (0.2 to 20 bar) with valves ½ NPT to 1 NPT as well as NPS ½ and 1 Pressure

More information

Model MTB-ASME Vertical Bladder Tanks

Model MTB-ASME Vertical Bladder Tanks DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)

More information

Team Insert Valve Sample Specification The Insert Valve shall conform to the following:

Team Insert Valve Sample Specification The Insert Valve shall conform to the following: Team Insert Valve Sample Specification The Insert Valve shall conform to the following: The Ductile Iron 250 p.s.i.g. Insert Valve shall be a Resilient Wedge Gate Valve designed for use in potable water,

More information

Side-of-Pole Mount for 1 Modules (SPM1) For Module Types E, F, G, & H ASSEMBLY INSTRUCTIONS. step-by-step assembly and installation

Side-of-Pole Mount for 1 Modules (SPM1) For Module Types E, F, G, & H ASSEMBLY INSTRUCTIONS. step-by-step assembly and installation Side-of-Pole Mount for 1 Modules (SPM1) For Module Types E, F, G, & H ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A SP3348-1 PCN 022212-2 Side-of-Pole Mount for 1 Module

More information

Mfg. No: Grass Catcher, Single Bag (Export)

Mfg. No: Grass Catcher, Single Bag (Export) Parts Manual Mfg. No: 7600237 Grass Catcher, Single Bag (Export) Copyright Briggs and Stratton. All Rights reserved 01-Apr-2019 Model Components Table Of Contents Page Single Catcher........................................................................................

More information

Load Controls Screw In Cartridge Valves Pressures to 350 bar (5000 psi) Flows to 190 l/min (50 USgpm)

Load Controls Screw In Cartridge Valves Pressures to 350 bar (5000 psi) Flows to 190 l/min (50 USgpm) Vickers Cartridge Valves Load Controls Screw In Cartridge Valves Pressures to 50 bar (5000 psi) Flows to 90 l/min (50 USgpm) Rev. 2/99 722 Contents MODEL DESCRIPTION TYP. APPLICATION PRESSURE bar (psi)

More information

Standard Hangers and Adapters

Standard Hangers and Adapters Standard s and Adapters Cable Gripping Tabs Prevent cable slippage without the need for a permanently installed hoisting grip. Pre-Assembled and Captivated Hardware Eliminates the need for field assembly.

More information

Nickel Alloy Fasteners Nickel Alloy Fasteners

Nickel Alloy Fasteners Nickel Alloy Fasteners HASM The Best of the Best Global provider of high-performance bolts, nuts, screws, studs, washers, and anchors. HASM s research and development is focused on producing an extensive range of fasteners with

More information

FITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI

FITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI Jetstream offers a wide variety of fittings with various connection types to fit your 20,000 psi application needs. The standard connection types, Type M, MP, and MP Tube lance, are available in standard

More information

Model MTB-ASME Vertical Bladder Tanks

Model MTB-ASME Vertical Bladder Tanks DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)

More information

V-PLOW. ACCUFLO Conveyor Belt Cleaning System MAX SYSTEMS GUIDE. Engineering. LIB-CP-SYS-01-E Rev.9. Page 1

V-PLOW. ACCUFLO Conveyor Belt Cleaning System MAX SYSTEMS GUIDE. Engineering. LIB-CP-SYS-01-E Rev.9. Page 1 ACCUFLO Conveyor Belt Cleaning System Page 1 Conveyor Belt Cleaning System - System Nomenclature CATGORY MAINFRAM INFORMATION BLAD INFORMATION CP=CONVYOR PRODUCTS CP - PA - 36 M - G 83 SYSTM TYP BLT WIDTH

More information

Detroit Speed, Inc. A-body Rear Coilover Conversion Kit A-body (Moser Rear Axle) P/N: , , , , ,

Detroit Speed, Inc. A-body Rear Coilover Conversion Kit A-body (Moser Rear Axle) P/N: , , , , , Detroit Speed, Inc. A-body Rear Coilover Conversion Kit 1964-1972 A-body (Moser Rear Axle) P/N: 042411, 042412, 042413, 042417, 042418, 042419 The Detroit Speed, Inc. A-body Rear Coilover Conversion Kit

More information

DOUBLE SAFETY: NO PANIC, NO BACTERIA

DOUBLE SAFETY: NO PANIC, NO BACTERIA Panic and emergency exit DOUBLE SAFETY: NO PANIC, NO BACTERIA In line with its attention to safety, ISEO has decided to add this measure to a device which is always present in public environments and in

More information