Push-in fittings QB, NPT
|
|
- Ethan Byrd
- 6 years ago
- Views:
Transcription
1
2 General technical data Connecting thread UNF NPT Size Standard Design Push-pull principle Mounting position An Tpe of seal on threaded plug Sealing ring Coating Operating and environmental conditions Operating pressure complete [psi] temperature range Operating medium Compressed air in accordance with ISO :2010 [7: : ] Note on operating/pilot medium Operation with lubricated medium possible Ambient temperature [ F] Corrosion resistance class CRC 1) 1 1) Corrosion resistance class CRC 1 to Festo standard FN Low corrosion stress. For dr indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions). Materials Sectional view Connecting thread UNF NPT 1 Release ring POM (colour: gre) 2 Tubing seal NBR 3 Housing Nickel-plated brass PBT 4 Tube retaining claw High-allo stainless steel 5 Threaded seal PTFE Note on materials Contains PWIS (paint-wetting impairment substances) RoHS-compliant 2 Internet: Subject to change 2016/10
3 Product range overview Design Version Tpe Connection D1 Connection D2 Page/ UNF thread Tubing O.D. Push-in sleeve Tubing O.D. Push-in sleeve Internet Inline Push-in fitting Male thread with external hex QB Â, Ã, ¼ 8 x Â, Ã, ¼,, ¼ Â, Ã, ¼,,, ¼,,,,, Push-in fitting Female thread with external hex QBF x Â, Ã, ¼,, ¼ Â, Ã, ¼,,, ¼,,,, 10 Push-in connector QB- -T  11 à ¼ QB- -T reducing à  ¼ Â, à Â, ¼ ¼, Push-in bulkhead connector QBS- T  12 à ¼ 2016/10 Subject to change Internet: 3
4 Product range overview Design Version Tpe Connection D1 Connection D2 Page/ UNF thread Tubing O.D. Push-in sleeve Tubing O.D. Push-in sleeve Internet Inline Push-in connector with push-in sleeve QB- H x ¼ 13  x, ¼ ¼ x,  Â, ¼ ¼, Push-in sleeve QBH reducing à  13 ¼ Â, à ¼ ¼, Blanking plug QBC- H  14 à ¼ 4 Internet: Subject to change 2016/10
5 Product range overview Design Version Tpe Connection D1 Connection D2 Page/ UNF thread Tubing O.D. Push-in sleeve Tubing O.D. Push-in sleeve Internet L-shape Push-in L-fitting Male thread with external hex QBL Â, Ã, ¼ 15 x Â, Ã, ¼,, ¼ Â, Ã, ¼,,, Ã, ¼,,,, Push-in L-fitting (long) Male thread with external hex QBLL x Â, Ã, ¼, ¼ Â, Ã, ¼,,, Ã, ¼,,,, 16 Push-in L-fitting Female thread with external hex QBLF Â, ¼ 17 x Â, Ã, ¼, ¼ Â, Ã, ¼,, ¼,,,, Push-in L-fitting Male thread with external hex QBLV x, Â, Ã, ¼ 18 x Â, Ã, ¼, ¼ Â, Ã, ¼,, Ã, ¼,,,,, Push-in L-connector QBL- T Â 19 Ã ¼ 2016/10 Subject to change Internet: 5
6 Product range overview Design Version Tpe Connection D1 Connection D2 Page/ UNF thread Tubing O.D. Push-in sleeve Tubing O.D. Push-in sleeve Internet T-shape Push-in T-fitting Male thread with external hex QBT Â, Ã, ¼ 20 x Â, Ã, ¼,, ¼ Â, Ã, ¼,,, Ã, ¼,,,, Push-in T-connector QBT- T Â 21 Ã ¼ QBT- T reducing ¼ Â ¼ ¼, Multiple distributor 3 outlets QBT3- T reducing Ã, ¼, Â 22 Ã, ¼ Push-in T-fitting Male thread with external hex QBTL Â, Ã, ¼ 23 x Â, Ã, ¼,, ¼ Â, Ã, ¼,,, Ã, ¼,,,, 6 Internet: Subject to change 2016/10
7 Product range overview Design Version Tpe Connection D1 Connection D2 Page/ UNF thread Tubing O.D. Push-in sleeve Tubing O.D. Push-in sleeve Internet X-shape Push-in X-connector QBX- T   24 à ¼ Y-shape Push-in Y-fitting Male thread with external hex QBY Â, Ã, ¼ 25 x Â, Ã, ¼,, ¼ Â, Ã, ¼,,, Ã, ¼,,,,, Push-in Y-connector QBY- T  26 à ¼ QBY- T reducing à  ¼ Â, à Â, ¼ ¼,, 2016/10 Subject to change Internet: 7
8 Push-in fitting QB Male thread with external hex Connection Nominal size Tubing O.D. D5 L1 L2 ß1 ß2 Weight/ Part No. Tpe PU 1) UNF thread / /16 3/ QB UNF-Â-U / /16 3/ QB UNF-Ã-U / /2 3/ QB UNF-¼-U 10 1/ / /16 1/ QB-x-Â-U / /16 1/ QB-x-Ã-U / /2 3/ QB-x-¼-U / /16 3/ QB-x--U / /16 3/ QB-x-Å-U 10 1/ / /16 1/ QB-¼-Â-U / /16 1/ QB-¼-Ã-U / /16 3/ QB-¼-¼-U / /16 1/ QB-¼--U / /16 1/ QB-¼-Å-U / /8 1/ QB-¼--U 10 3/ / /16 3/ QB-Å-¼-U / /16 1/ QB-Å--U / /16 5/ QB-Å-Å-U / /8 3/ QB-Å--U 5 1/ / /8 1/ QB---U / /8 5/ QB--Å-U / /8 3/ QB---U 5 8 Internet: Subject to change 2016/10
9 Push-in fitting QB- -I Male thread with internal hex UNF NPT Connection Nominal size Tubing O.D. D5 H1 H2 H3 ß Weight/ Part No. Tpe PU 1) UNF thread / / QB UNF-Ã-I-U / / QB UNF-¼-I-U 10 1/ / / QB-x-Â-I-U / / QB-x-Ã-I-U / / QB-x-¼-I-U / / QB-x--I-U 10 1/ / / QB-¼-¼-I-U / / QB-¼--I-U / / QB-¼-Å-I-U 10 3/ / / QB-Å--I-U / / QB-Å-Å-I-U / / QB-Å--I-U 5 1/ / / QB---I-U /10 Subject to change Internet: 9
10 Push-in fitting QBF Female thread with external hex Connection Nominal size Tubing O.D. D5 L1 L2 ß Weight/ Part No. Tpe PU 1) 1/ / / QBF-x-Â-U / / QBF-x-Ã-U / / QBF-x-¼-U / / QBF-x--U / / QBF-x-Å-U 10 1/ / / QBF-¼-Â-U / / QBF-¼-Ã-U / / QBF-¼-¼-U / / QBF-¼--U / / QBF-¼-Å-U / / QBF-¼--U 5 3/ / / QBF--¼-U / / QBF---U / / QBF--Å-U / / QBF---U 5 1/ / / QBF---U / / QBF--Å-U 5 10 Internet: Subject to change 2016/10
11 Push-in connector QB- T Reducing Tubing O.D. Nominal size Tubing O.D. D5 D6 H1 L1 Weight/ Part No. Tpe PU 1) 5/ QB-ÂT-U 10 3/ QB-ÃT-U 10 1/ QB-¼T-U 10 5/ QB-T-U 10 3/ QB-ÅT-U 10 1/ QB-T-U 5 Reducing 3/ / QB-ÃT-Â-U 10 1/ / QB-¼T-Â-U / QB-¼T-Ã-U 10 5/ / QB-T-Â-U / QB-T-¼-U 10 3/ / QB-ÅT-¼-U / QB-ÅT--U 10 1/ / QB-T-Å-U /10 Subject to change Internet: 11
12 Push-in bulkhead connector QBS- T Tubing O.D. Nominal size D5 L1 L2 ß Weight/ Part No. Tpe PU 1) D1 [inch] [oz] 5/ M12x QBS-ÂT-U 10 3/ M14x QBS-ÃT-U 10 1/ M14x QBS-¼T-U 10 5/ M16x QBS-T-U 10 3/ M20x QBS-ÅT-U 5 1/ M22x QBS-T-U 5 12 Internet: Subject to change 2016/10
13 Push-in connector QB- H with push-in sleeve Push-in sleeve Nominal size Tubing O.D. D5 L1 L2 Weight/ Part No. Tpe PU 1) 1/ / QB-ÁH-¼-U 10 5/ / QB-ÂH-Á-U / QB-ÂH-¼-U 10 1/ / QB-¼H-Á-U / QB-¼H-Â-U 10 5/ / QB-H-Â-U / QB-H-¼-U 10 3/ / QB-ÅH-¼-U / QB-ÅH--U 10 1/ / QB-H-Å-U 10 Push-in sleeve QBH Reducing Push-in Nominal size Push-in L1 L2 Weight/ Part No. Tpe PU 1) sleeve sleeve Reducing 3/ / QBH-Ã-Â-U 10 1/ / QBH-¼-Â-U / QBH-¼-Ã-U 10 5/ / QBH--¼-U 10 3/ / QBH-Å-¼-U / QBH-Å--U 10 1/ / QBH--Å-U /10 Subject to change Internet: 13
14 Blanking plug QBC- H Push-in sleeve D1 D5 L1 L2 Weight/ Part No. Tpe PU 1) 5/32 5/ QBC-ÂH-U 10 3/16 3/ QBC-ÃH-U 10 1/4 1/ QBC-¼H-U 10 5/16 5/ QBC-H-U 10 3/8 3/ QBC-ÅH-U 10 1/2 1/ QBC-H-U 10 [oz] 14 Internet: Subject to change 2016/10
15 Push-in L-fitting QBL Male thread with external hex Connection Nominal size Tubing O.D. D5 H1 H2 L1 ß Weight/ Part No. Tpe PU 1) UNF thread / / QBL UNF-Â-U / / QBL UNF-Ã-U / / QBL UNF-¼-U 10 1/ / / QBL-x-Â-U / / QBL-x-Ã-U / / QBL-x-¼-U / / QBL-x--U / / QBL-x--U 10 1/ / / QBL-¼-Â-U / / QBL-¼-Ã-U / / QBL-¼-¼-U / / QBL-¼--U / / QBL-¼--U / / QBL-¼--U 5 3/ / / QBL-Å-Ã-U / / QBL-Å-¼-U / / QBL-Å--U / / QBL-Å-Å-U / / QBL-Å--U 5 1/ / / QBL--Å-U / / QBL---U /10 Subject to change Internet: 15
16 Push-in long L-fitting QBLL Male thread with external hex Connection Nominal size Tubing O.D. D5 H1 H2 L1 ß Weight/ Part No. Tpe PU 1) 1/ / / QBLL-x-Â-U / / QBLL-x-Ã-U / / QBLL-x-¼-U / / QBLL-x--U 10 1/ / / QBLL-¼-Â-U / / QBLL-¼-Ã-U / / QBLL-¼-¼-U / / QBLL-¼--U / / QBLL-¼-Å-U / / QBLL-¼--U 5 3/ / / QBLL--Ã-U / / QBLL--¼-U / / QBLL---U / / QBLL--Å-U / / QBLL---U 5 1/ / / QBLL--Å-U / / QBLL---U 5 16 Internet: Subject to change 2016/10
17 Push-in L-fitting QBLF Female thread with external hex Connection Nominal size Tubing O.D. D5 H1 H2 L1 ß Weight/ Part No. Tpe PU 1) UNF thread / / QBLF UNF-¼-U / / QBLF UNF-Â-U 10 1/ / / QBLF-x-Â-U / / QBLF-x-Ã-U / / QBLF-x-¼-U / / QBLF-x--U 10 1/ / / QBLF-¼-Â-U / / QBLF-¼-Ã-U / / QBLF-¼-¼-U / / QBLF-¼--U / / QBLF-¼-Å-U 5 3/ / / QBLF--¼-U / / QBLF---U / / QBLF--Å-U / / QBLF---U 5 1/ / / QBLF--Å-U / / QBLF---U /10 Subject to change Internet: 17
18 Push-in L-fitting QBLV Male thread with external hex Connection Nominal size Tubing O.D. D5 H1 H2 L1 ß Weight/ Part No. Tpe PU 1) UNF thread / / QBLV UNF-x-U / / QBLV UNF-Â-U / / QBLV UNF-Ã-U / / QBLV UNF-¼-U 10 1/ / / QBLV-x-Â-U / / QBLV-x-Ã-U / / QBLV-x-¼-U / / QBLV-x--U 10 1/ / / QBLV-¼-Â-U / / QBLV-¼-Ã-U / / QBLV-¼-¼-U / / QBLV-¼--U / / QBLV-¼-Å-U 5 3/ / / QBLV--Ã-U / / QBLV--¼-U / / QBLV---U / / QBLV--Å-U / / QBLV---U 5 1/ / / QBLV---U / / QBLV--Å-U / / QBLV---U 5 18 Internet: Subject to change 2016/10
19 Push-in L-connector QBL- T Tubing O.D. Nominal size D5 D6 H1 Weight/ Part No. Tpe PU 1) D1 [inch] [oz] 5/ QBL-ÂT-U 10 3/ QBL-ÃT-U 10 1/ QBL-¼T-U 10 5/ QBL-T-U 10 3/ QBL-T-U 10 1/ QBL-T-U /10 Subject to change Internet: 19
20 Push-in T-fitting QBT Male thread with external hex Connection Nominal size Tubing O.D. D5 H1 H2 L1 ß Weight/ Part No. Tpe PU 1) UNF thread / / QBT UNF-Â-U / / QBT UNF-Ã-U / / QBT UNF-¼-U 10 1/ / / QBT-x-Â-U / / QBT-x-Ã-U / / QBT-x-¼-U / / QBT-x--U / / QBT-x--U 5 1/ / / QBT-¼-Â-U / / QBT-¼-Ã-U / / QBT-¼-¼-U / / QBT-¼--U / / QBT-¼--U / / QBT-¼--U 5 3/ / / QBT--Ã-U / / QBT--¼-U / / QBT---U / / QBT---U / / QBT---U 1 1/ / / QBT---U / / QBT---U 1 20 Internet: Subject to change 2016/10
21 Push-in T-connector QBT- T Reducing Tubing O.D. Nominal size Tubing O.D. D5 D6 D7 H1 H2 L1 L2 Weight/ Part No. Tpe PU 1) 5/ / QBT-ÂT-U 10 3/ / QBT-ÃT-U 10 1/ / QBT-¼T-U 10 5/ / QBT-T-U 10 3/ / QBT-T-U 5 1/ / QBT-T-U 5 Reducing 1/ / QBT-¼T-Â-U 10 5/ / QBT-T-¼-U 10 3/ / QBT-T-¼-U / QBT-T--U 10 1/ / QBT-T--U /10 Subject to change Internet: 21
22 Multiple distributor QBT3- T 3 outlets Tubing O.D. Nominal size Tubing O.D. D5 D6 D7 H1 H2 L1 L2 Weight/ Part No. Tpe PU 1) 3/ / QBT3-ÃT-Â-U 5 1/ / QBT3-¼T-Â-U 5 5/ / QBT3-T-Â-U / QBT3-T-Ã-U / QBT3-T-¼-U 5 3/ / QBT3-ÅT-¼-U / QBT3-ÅT--U 5 22 Internet: Subject to change 2016/10
23 Push-in T-fitting QBTL Male thread with external hex Connection Nominal size Tubing O.D. D5 H1 H2 L1 ß Weight/ Part No. Tpe PU 1) UNF thread / / QBTL UNF-Â-U / / QBTL UNF-Ã-U / / QBTL UNF-¼-U 10 1/ / / QBTL-x-Â-U / / QBTL-x-Ã-U / / QBTL-x-¼-U / / QBTL-x--U / / QBTL-x--U 5 1/ / / QBTL-¼-Â-U / / QBTL-¼-Ã-U / / QBTL-¼-¼-U / / QBTL-¼--U / / QBTL-¼--U / / QBTL-¼--U 5 3/ / / QBTL--Ã-U / / QBTL--¼-U / / QBTL---U / / QBTL---U / / QBTL---U 5 1/ / / QBTL---U / / QBTL---U /10 Subject to change Internet: 23
24 Push-in X-connector QBX- T Tubing O.D. Nominal size D5 D6 H1 L1 L2 Weight/ Part No. Tpe PU 1) D1 [inch] [oz] 5/ QBX-ÂT-U 10 3/ QBX-ÃT-U 10 1/ QBX-¼T-U 10 5/ QBX-T-U 5 3/ QBX-T-U 5 1/ QBX-T-U 5 24 Internet: Subject to change 2016/10
25 Push-in Y-fitting, QBY Male thread with external hex Connection Nominal size Tubing O.D. D5 H1 L1 L2 ß Weight/ Part No. Tpe PU 1) UNF thread / / QBY UNF-Â-U / / QBY UNF-Ã-U / / QBY UNF-¼-U 10 1/ / / QBY-x-Â-U / / QBY-x-Ã-U / / QBY-x-¼-U / / QBY-x--U / / QBY-x--U 5 1/ / / QBY-¼-Â-U / / QBY-¼-Ã-U / / QBY-¼-¼-U / / QBY-¼--U / / QBY-¼--U / / QBY-¼--U 5 3/ / / QBY--Ã-U / / QBY--¼-U / / QBY---U / / QBY---U / / QBY---U 5 1/ / / QBY---U / / QBY---U / / QBY---U /10 Subject to change Internet: 25
26 Push-in Y-connector QBY- T Reducing Tubing O.D. Nominal size Tubing O.D. D5 D6 D7 H1 L1 Weight/ Part No. Tpe PU 1) 5/ QBY-ÂT-U 10 3/ QBY-ÃT-U 10 1/ QBY-¼T-U 10 5/ QBY-T-U 10 3/ QBY-T-U 5 1/ QBY-T-U 5 Reducing 3/ / QBY-ÃT-Â-U 10 1/ / QBY-¼T-Â-U / QBY-¼T-Ã-U 10 5/ / QBY-T-Â-U / QBY-T-¼-U 10 3/ / QBY-T-¼-U / QBY-T--U 10 1/ / QBY-T--U / QBY-T--U 5 26 Internet: Subject to change 2016/10
Push-in fittings QB, NPT
General technical data Connecting thread UNF10-32 NPT1/8-27 NPT1/4-18 NPT3/8-18 NPT1/2-14 Size Standard Design Push-pull principle Mounting position An Tpe of seal on threaded plug Sealing ring Coating
More informationPush-in fittings CQ, for push-fit piping systems
Key features General information Suitable for polyamide pipes PQ-PA and aluminium pipes PQ-AL O.D. 12, 15, 18, 22 and 28 mm Internet: pq Suitable for polyamide tubing PAN and polyurethane tubing PUN O.D.
More informationPush-in fittings NPQH
Key features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard
More informationHand slide valves W/VBOH
Hand slide valves W/VBOH Hand slide valves W/VBOH Product range overview Version Valve function Version Type Pneumatic connection 1 Pneumatic connection 2 qnn Page/ Internet [l/min] Hand slide valves 3/2-way,
More informationPush-in fittings NPQH
Key features Application Effortless selection of the right fitting. Quick Star offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard
More informationSolenoid valves VZWF, force pilot operated
Key features and overview Function Normally closed solenoid valve with diaphragm and forced lifting. When the solenoid is energised, the differential pressure from the secondary side of the diaphragm is
More informationPush-in fittings CRQS, stainless steel
Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard and
More informationPN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12
PN LINE PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN
More informationHand lever valves VHER
Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:
More informationProportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
More informationPrecision pressure regulators LRP/LRPS
Precision pressure regulators LRP/LRPS q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
More informationHand slide valves W/VBOH
Hand slide valves W/VBOH Hand slide valves W/VBOH Product range overview Version Valve function Version Type Pneumatic connection 1 Pneumatic connection 2 qnn Page/ Internet [l/min] Hand slide valves 3/2-way,
More informationPush-in fittings CRQS, stainless steel
Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard and
More informationBellows actuator EB Key features
Bellows actuator B Bellows actuator B Key features Key features Suitable for use in harsh, dusty ambient conditions Can be used under water Sturdy design Large forces range from 1 50 KN Low installation
More informationExhaust air flow control valves
Exhaust air flow control valves Exhaust air flow control valves Product range overview Function Exhaust air flow control valves are screwed into the exhaust controls of control valves or drives. They enable
More informationHeavy-duty three-point grippers HGDT
Key features At a glance The force generated by the linear motion is translated into the gripper jaw movement via a force-guided triple wedge mechanism. This also guarantees synchronous movement of the
More informationValves, manually operated
Valves, manually operated Valves, manually operated Key features VHEM-P K/O-3-PK-3 H-3-¼-B KH/O-3-PK3 TH/O-3-PK3 F-3-¼-B Innovative Versatile Reliable Easy to mount Small and compact for a wide range of
More informationValves, manually operated
Valves, manually operated Valves, manually operated Key features VHEM-P K/O-3-PK-3 H-3-¼-B KH/O-3-PK3 TH/O-3-PK3 VHEM-L F-3-¼-B Innovative Versatile Reliable Easy to mount Small and compact for a wide
More informationPressure boosters DPA
Key features Function The pressure booster is a twin-piston pressure intensifier intended solely for compressing air. When the DPA is pressurised with compressed air, integrated non-return valves automatically
More informationCONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint
Super-rapid fittings for plastic tubes Series 6000 Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3, M5, M6, M7), BSP (G1/8, G1/, G3/8, G1/2, G3/), BSPT (R1/8,
More informationParallel grippers HGPM, micro
Key features G6: G8: G9: stroke compensation clamping spigot flange mounting At a glance Compact, handy design With open or closed gripper jaws Versatility thanks to externally adaptable gripper fingers
More informationBernoulli grippers OGGB
Key features General Purpose Benefits Applications The Bernoulli gripper OGGB is ideally suited to transporting thin, extremely delicate and brittle workpieces. Minimised workpiece contact, gentle workpiece
More informationSTC. Push-In Fittings & Polyurethane Tubing. Fine Quality. Precision Engineered Advanced Design. Excellent Prices
Precision Engineered Advanced Design Push-In Fittings & Polyurethane Tubing Catalog: PUB 2012 PUB 07 FIT STC Push-In Fittings & Polyurethane Tubing Fine Quality Excellent Prices A 1 connects fluid power
More informationPrecision one-way flow control valves GRP
Product range overview and type codes Product range overview Version Valve function Version Type Connection direction Precision one-way flow control valve Metal One-way flow control function Pneumatic
More informationFluidic Muscle DMSP Key features
Key features Mode of operation Fluidic Muscle is a tensile actuator which mimics the natural movement of a muscle. It consists of contractible tubing and appropriate connectors. The contractible tubing
More informationPressure gauges Product range overview
Pressure gauges Pressure gauges Product range overview Type Pneumatic connection Nominal size Display unit Red/ Outer scale Inner scale green bar MPa psi bar MPa psi range Page/ Internet Pressure gauge
More informationPush-In Fitting Type with Stop Valve
http://www.pisco.co.jp Push-In Fitting Type with Stop Valve 278 Push-In Fitting Type with Stop Valve for General Pneumatic Piping. Air Stop by Tube Disconnection. Easy Insertion and Disconnection by Double-passage
More informationCoiling Tube with Twist-Proof Fitting
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Anti-Twisting Coiling Tube for Air Tool Coiling Tube with Twist-Proof Fitting 306 Avoid Twisted Tube Problem
More informationscrew fittings - nickel plated brass series SC
screw fittings - nickel plated brass series SC SC SCC SC SC SC SC SC SCC SC SC SC SCC SC SC SC2C SC2 SC2 SC SC3 SC3 SC0 SC design screw fitting with swivel nut connection 1/"...1/2" optionally cylindrical
More information// ADapters GUIDelines
// ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall
More informationC 0G 00 N/US
G, GP, G, GP In-line flow regulators (block form) Uni-directional Ø /... / inch, Ø 4... mm High flow performance In-line or panel mounting Adjustment can be locked aptive regulator needle will not blow
More informationPrestolok PLM Metal Push-to-Connect Fittings
Prestolok PM Metal Push-to-Connect ittings To meet your technical and environment requirements, Parker s Prestlok PM fittings offers the robustness, reliability and resistance to industrial fluids for
More informationHand Valve Series. Push-In Fitting Type Shut-off Valve (Residual Pressure Release Valve) Control Open/Close for Air Supply.
http://www.pisco.co.jp VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Shut-off Valve (Residual Pressure Release Valve) Hand Valve Series 556 Control Open/Close for Air Supply. Release Residual
More informationProportional pressure regulators VPPM
Key features LED indicators Control elements Display Plug socket with cable Venting at both ends Manifold block Sub-base valve Assembly repositionable by 180 In-line valve H-rail mounting Compressed air
More informationPressure Gauge Series
Pressure Gauge Series Compact Design. Connection type In line Plug in Panel mount Threaded Model Designation (Example) GP C 15 U10 U 1 Type Pressure Gauge 1 Type 2 Series 4 Wrench size 3 Thread size/ Tube
More informationFITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI
Jetstream offers a wide variety of fittings with various connection types to fit your 20,000 psi application needs. The standard connection types, Type M, MP, and MP Tube lance, are available in standard
More informationType Pressure Regulator. for increased air capacity. Fig. 1: Type Pressure Regulator. Mounting and Operating Instructions EB EN
Type 4708-45 Pressure Regulator for increased air capacity Fig. 1: Type 4708-45 Pressure Regulator Mounting and Operating Instructions EB 8546-1 EN Edition March 2010 Definition of the signal words used
More informationSCHRADER TANK VALVES FOR USE IN AIR BLADDER APPLICATIONS, BICYCLE SUSPENSION SYSTEMS, TELECOMMUNICATIONS, WATER STORAGE SYSTEMS, ETC.
SCHRADER TANK VALVES FOR USE IN AIR BLADDER APPLICATIONS, BICYCLE SUSPENSION SYSTEMS, TELECOMMUNICATIONS, WATER STORAGE SYSTEMS, ETC. Demand an authentic Schrader valve built by the company that set the
More informationSO 9001 I ACCESSORIES
ISO 9001 ESSORIES ESSORIES INDEX Page In-Line Mounted Flow ontrol Valves 3 In-Line Mounted heck Valves 3 Quick Exhaust, heck and Shuttle Valves In-Line Ported Lockout Valves 5 Mufflers 6 Fittings 7-9 2
More informationPiloted Non-Return Valves
ed Non-Return Valves ed non-return valves are designed to protect installations: if the compressed air supply is removed, they lock the air supply to the cylinder, thus maintaining it in position. Product
More information2 Overview. SITRANS P measuring instruments for pressure. Transmitters for gage and absolute pressure. Z series for gage pressure
Z series for gage pressure Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and electronics plate Process connection Electrical connection
More informationNickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO
Nickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO Swivel Design : Meter-Out, Meter-In and Needle Orifice Tube Diameter OD: 1/8, 5/2, 1/4, 5/16, /8
More informationParallel grippers HGPM, micro
Key features G6: G8: G9: with stroke compensation with clamping spigot with flange mounting At a glance Compact, handy design With open or closed gripper jaws Versatility thanks to externally adaptable
More informationCautions : 1. Be careful when you release the Stop Fitting with some internal pressure
The flow-shut mechanism will operate to stop the air flow when the tube is disconnected and will allow air flow when the tube is connected. The double-passage structure facilitates easy connection and
More informationAngle grippers HGWM, micro
Key features G6: G7: G8: with stroke compensation with male thread with clamping spigot At a glance Compact, handy design With open or closed gripper jaws Versatility thanks to externally adaptable gripper
More informationTechnical Information Ball valves for high pressure applications
Technical Information Ball valves for high pressure applications General Please ensure that the maximum pressure is in complicance with all connexions in the system. Ball valves generally should not be
More informationVEP Series VEP-BOP Series. canada.dixonvalve.com Customer Service:
UFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFAC VEP Series VEP-BOP Series Customer Service: 877.963.4966 Body Technical Specifications Pressure Rating Burst
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationChange Valve. Push-In Fitting Type Three-way Changeover Valve. Changeover Air Direction by 90. Lightweight and Compact Design.
http://www.pisco.co.jp VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Three-way Changeover Valve Change Valve Changeover Air Direction by 90 Lightweight and Compact Design. Fine Operability and
More informationAdaptive gripper fingers DHAS
Features At a glance Adaptive gripper fingers for smooth and flexible gripping, with the Fin Ray Effect derived from the movement of a fish s tail fin. Two flexible bands, which meet at the top like a
More informationOne-touch Fittings Manifold. Porting. One-touch fitting. One-touch fitting. One-touch fitting. One-touch fitting. One-touch fitting.
One-touch Fittings Manifold Series KM RoHS Compact piping possible. Manifold piping possible. Many varieties (0 types) are available. s give the most efficient operation. KM1 KM1 orting Rc female thread
More informationshutoff valves 900 Series psig Manual Shutoff Valves
0 6000 psig Manual Shutoff Valves Features Zero leakage Protected o-ring Full flow passages Freedom from wire drawing Panel mount standard Hand wheel or toggle handle How it Works Closed O-ring seal on
More informationBladder Accumulators High pressure
Bladder Accumulators High pressure 1. DESCRIPTION 1.1. FUNCTION Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas (nitrogen) is utilised in
More informationIndustrial Products Catalog Tank Valves
Industrial Products Catalog Tank Valves Schrader International core competencies include high volume precision machining, assembly and testing of fluid control devices. Since developing the first pneumatic
More informationSolenoid valves CDSV, Clean Design
Key features Innovative Versatile Reliable Proven valve technology combined with a highly resistant polymer material. valve position 2 solenoid coils Flow rate 300 650 l/min Valve width 24 mm Connected
More informationCalibrated or locked versions available. TREATMENT > Series MD regulators GENERAL DATA. New
> Series MD regulators Series MD pressure regulators New Ports with interchangeable cartridges: threaded (1/8, 1/4, /8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm Versions: single,
More informationCautions : 1. Clogging of the element raises resistance to exhaust, thus lowering the
The Silencer, connected to the exhaust port of a device, suppresses the exhaust noise. The Silencer displays an excellent noise suppression effect. Three types are available for your selection. The element
More informationDiaphragm Accumulators
1. DESCRIPTION 1.1. FUNCTION Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas is utilised in hydro-pneumatic accumulators for storing fluids.
More informationPrestolok PLS Stainless Steel Push-to-Connect Fittings
Prestolok PS Stainless Steel Push-to-Connect ittings Parker s Prestolok PS fittings are ideal for conveying corrosive fluids in aggressive environments. Prestolok PS fittings provide corrosion resistance
More informationBall Valve Series. Push-In Fitting Type Shut-off Valve. Control Open/Close Air Supply. Ensure Effective Area for Variety of Tube Dia.
http://www.pisco.co.jp VALVE TUBE MAKE-TO-ORDER PRODUTS Push-In Fitting Type Shut-off Valve Ball Valve Series 564 ontrol Open/lose Air Supply. Ensure Effective Area for Variety of Tube Dia. Easily Adjustable
More information(1) Type (2) Thread size (T) (3) Wrench size specification : inch spec. (NPT, UNF) : mm spec. (M, R)
This exhaust needle valve, which comes with silencer, controls the exhaust flow rate. The valve can be attached directly to a solenoid valve where a cylinder or like mechanism has no sufficient space around
More informationPressure Measurement. Transmitters for basic requirements SITRANS P Z for gauge pressure. 2/4 Siemens FI Overview
f gauge pressure Siemens AG 010 Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and electronics plate Process connection Electrical connection
More informationBarbed Fittings. The World Standard. Dubl-Barb Fittings. Hose Barb Fittings. Compact One-piece Economical Reusable Use with Polyethylene Tubing
Barbed Fittings zfc05 ubl-barb Fittings Compact One-piece Economical Reusable Use with Polyethylene Tubing Hose Barb Fittings All Brass Construction Straight and etric Threads Beaded & Standard Hose Barbs
More informationPush-In Fitting Type Pressure Gauge
http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type 526 Compact Design. Pressure Indication by Tube Insertion into Push-In Fitting. Check Valve Silencer Controller
More informationPressure Dump Valve Service Kit for Series 3000 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator
More informationStandard Specifications
NARM, 2 Ways of Connection Small Size Pressure Gauge ø5mm Reverse flow function available on the standard model Space Saving -B2 NARM-6A-NG Standard Specifications Fluid Proof pressure psig (MPa) Max.
More informationGo to Table of Contents. Ball and Plug Valves
Ball and Plug s July 2014 Series s Parker series manually, pneumatically and electrically actuated two-way and three-way ball valves are designed for 1/4 and 1/2 turn media shutoff or switching applications
More informationSITRANS P measuring instruments for pressure
SITRANS P measuring instruments for pressure Z series for gage pressure Siemens AG 008 Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and
More informationPlastic tubing, standard O.D.
Plastic tubing, standard O.D. Plastic tubing, standard O.D. Features Application The requirements with respect to pressure, temperature, flexibility and environmental influences differ from industry to
More informationRelief Valves. Relief Valves. International, Inc. Company ACIRCOR. RS Differential NB 9.5mm. RVA In-line Differential NB 6 to 19mm
s s RS Differential NB 9.5mm RVA In-line Differential NB 6 to 19mm RV Direct Acting NB up to 9mm LPR Low Pressure Differential NB 8mm We design, machine, build and test all our products on one site in
More informationSATURNSERIES INTERCHANGE > ISO (for the couplings)
Saturn Block INTERCHANGE > ISO 16028 (for the couplings) PATENTED ISO 16028 TECHNICAL FEATURES AND OPTIONS Interchange ISO 16028 (for the couplings) Sealing description Nitrile NBR Connection system Push
More information4/2 way Pneumatic Solenoid Valve
4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11
More informationParallel grippers HGPT-B, heavy-duty
Key features Advantages compared with the parallel gripper HGPT Space-optimised: Choice of shorter housing without gripping force retention or longer housing with gripping force retention Increased gripping
More informationCable Glands. Special Applications. RoHS Compliance. Plastic & Metal Cable Glands Adapters Reducers & Enlargers Grommets & Accessories
able Glands RoHS ompliance Plastic & Metal able Glands dapters Reducers & Enlargers Grommets & ccessories L File #: E363825 cable gland is a device that allows the user to pass a cable, wire or tube into
More informationPressure Dump Valve Service Kit for Series 2300 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit
More informationF l o w c o n T R o l v a l v E S
Composite Right Angle Flow Control Valves Series TMCU-TMVU-TMCO- BSP/METRIC Meter In, Meter Out, Needle Orifice G1/8, G1/, G3/8, G1/2 Banjo flow controllers Nominal diameters Ø 2-3.8-5.8-8 The Meter In,
More informationPVC FASTTAP SADDLES for IPS Mains. Main Size OUTLET 1 FPT 3/4 CTS (7/8 OD) COMPRESSION 1 CTS (1 1/8 OD) COMPRESSION 3/4 IPS COMPRESSION
PVC FASTTAP SADDLES PVC FASTTAP SADDLES for IPS Mains THE ULTIMATE CONNECTION OUTLET 3/4 IPS FEMALE SLIP OR 1 IPS MALE SLIP SOLVENT WELD 1 IPS FEMALE SLIP SOLVENT WELD 3/4 MPT 1 MPT 3/4 FPT MAIN 13/16
More informationpatented standards SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE a n d ot h e r p e n di n g
SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE PREVO S1 couplings represent the latest generation of pneumatic connection mechanisms. They provide a fully safe response to the
More informationWirsbo / AquaPEX. AquaPEX Tube. White Coils. White Straight Lengths. Wirsbo AquaPEX plus Tubing. Red Coils. Blue Coils PAGE 055-1
2011 Wirsbo / AquaPEX PAGE 055-1 Code# Description Pkg Mfg# AquaPEX Tubing AquaPEX Tube Wirsbo AquaPEX tubing is used in hot and cold potable water distribution systems and Uponor residential fire safety
More informationWS Series WS-BOP Series. canada.dixonvalve.com Customer Service:
UFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTU WS Series WS-BOP Series Customer Service: 877.963.4966 High Pressure Wingstyle Hydraulic Couplings Applications:
More informationMounting and Operating Instructions EB EN. Type Supply Pressure Regulator. with increased air capacity
Type 4708-45 Supply Pressure Regulator with increased air capacity Translation of original instructions Mounting and Operating Instructions EB 8546-1 EN Edition March 2016 Note on these mounting and operating
More informationDescription Supply pressure Pressure range Connection Device Page max. bar bar thread
Pressure Regulators Supply pressure Pressure range onnection Device Page max. bar bar thread Maxi -Series, robust, interlockable 1 0. 1.8 / 17 G¼ - G1 R0, R1.0 made of plastic, also for liquids 1,5 0 4
More informationCautions : 1. The gauge orientation on the GPU and GPM types can be changed by using
The compact-size pressure gauge can be installed in small spaces. With the built-in tube fitting type, tube connection is the only necessary step before pressure indication. Fluid medium Indicated pressure
More informationTest pumps. Pressure sources. Good reasons for proper and reliable calibration
Test pumps Pressure is one of the most commonly measured quantities in engineering, which is why exact and reliable pressure measurement is especially important. However, the characteristics of the even
More informationPropor tional Re lief Valve s
www.swagelok.com Propor tional Re lief Valve s R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections Proportional Relief Valves
More informationMicro grippers HGPM/HGWM
HGPM/HGWM Miniaturised and optimised for assembly tasks Versatile 2004/10 Subject to change Products 2004/2005 1 / 1 HGPM/HGWM Key features HGWM HGPM 1 2 3 4 1 2 3 4 System product for handling and assembly
More informationBinks SG-2 Plus TM 2 QT. PRESSURE CUPS Model No (Standard) Model No (with OscillatingAgitator)
INTRODUCTION Binks SG-2 Plus TM Pressure Cup is ideal for component spraying and industrial applications where small batch production spraying is required. The 2 qt. capacity is sufficient to complete
More informationCI-SfB 732 (5-1) x. - laboratory fittings
CI-SfB 732 (5-1) x - laboratory fittings - ordering information Generally, item numbers for fittings have the following structure XL XX XXX 10 XX - XX X brownall Labtap Series no. Models 30 - Angle valves
More information(1) Type (2) Cylinder dia. (3) Gripper action : Single-acting closing gripper (normally open) (4) Holder type
These are air finger models featuring light weight and miniature size. Blank fingers are available for the K type fingers as option. R-guide leaves no possibility of misalignment. The blank finger can
More informationTechnifit. Union Bulkhead Flow Controller. Fractional & Metric. Push-to-Connect Fittings. March 2006
Technifit TM Push-to-Connect Fittings March 2006 Male Female Elbow Tee Union Bulkhead Flow Controller Fractional & Metric PO Box 335 12740 State Route 4 Milford Center, Ohio 43045-0335 USA Phone: 937.349.4055
More information(1) Type. (2) Tube dia. (ød) : ø8mm (ø5/16in.) (3) Thread size (T) (4) Specification. Fluid medium. Air, water * 1, * 2, * 3 Max. operating pressure
This type of tube fitting comes in eight lengths to suit your applications. The tube fitting, provided with a hexagonal hole, can be easily installed using an Allen wrench, even in a narrow or limited
More informationINSTRUMENTATION VALVES
INSTRUMENTATION VALVES INSTRUMENTATION BALL VALVES INTEGRAL-BONNET NEEDLE VALVES TOGGLE VALVES (TG Series) CHECK VALVES (CHV Series: For General Industry) RELIEF VALVES (RVL/RVH Series) INSTRUMENTATION
More informationDMK 458. Pressure Transmitter for Marine and Offshore. Ceramic Sensor. accuracy according to IEC 60770: standard: 0.25 % FSO option: 0.
Pressure Transmitter for Marine and Offshore Ceramic Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0. % FSO Nominal pressure from 0... 40 mbar up to 0... 0 bar Output signals -wire:
More information(1) Type (2) Tube dia. (ød(1)) (3) Thread size (T) (4) Wrench size specification : inch spec. (NPT, UNF) : mm spec. (M, R)
When the primary pressure is introduced from the thread side, a reduced pressure comes out from the joint side. The compact desigh with a built-in quick-fitting joint makes flexibe layout possible. The
More informationPanel-mounted valves Series T, Ø 22.5 mm
Series T, Basic valve 3/2-way, M5 (10/32 UNF) M 5 and G 1/8 2.122 Basic valve 3/2-way, M5 (10/32 UNF) M 5 and G 1/8 2.122 Push button 18-T-23-011 2.126 Mushroom 18-T-23-012 2.126 2-position switch 18-T-23-013
More informationFluidic Muscle DMSP/MAS
Fluidic Muscle DMSP/MAS Fluidic Muscle DMSP/MAS Key features Mode of operation Fluidic Muscle is a tensile actuator which mimics the natural movement of a muscle. It consists of contractible tubing and
More informationBROEN-LAB UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM BROEN-LAB UNIFLEX TM FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM PREMIUM LAB
BROEN-LAB UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM LAB TABLE OF CONTENTS Content Page Table of Content 2 Product Overview 3 BROEN-LAB-LAB UniFlex TM 4-5 Fittings for Non-burnig 2.0 Gases/Vacuum
More informationBL68 - Olympian Plus, plug-in system Filter/regulators and lubricators
>> Port size: 3/4... /2 (ISO G/ PTF) >> Complete air processing units pre-assembled, ready to install Technical features Medium: Compressed air only Maximum operating pressure: 7 bar (246 psi) Pressure
More informationHP/UHP Spring-Loaded Regulator
Description HP (High Purity) and UHP (Ultra High Purity) products are for service where the product must be kept free of contamination. The design is kept simple to minimise dead areas where contaminants
More informationSolenoid Valves VUVG Overview
Solenoid Valves VUVG Overview Universal valve Combination of basic valve and E-boxes Width 10 mm and 14 mm In-line valves VUVG-L and VUVG-S Sub-base valves VUVG-B Internal or external pilot air supply
More information