Push-in fittings QB, NPT
|
|
|
- George Spencer
- 5 years ago
- Views:
Transcription
1
2 General technical data Connecting thread UNF10-32 NPT1/8-27 NPT1/4-18 NPT3/8-18 NPT1/2-14 Size Standard Design Push-pull principle Mounting position An Tpe of seal on threaded plug Sealing ring Coating Max. tightening torque [ft-lbf] Operating and environmental conditions Operating pressure complete [psi] temperature range Operating medium Compressed air in accordance with ISO :2010 [7: : ] Note on operating/pilot medium Operation with lubricated medium possible Ambient temperature [ F] Corrosion resistance class CRC 1) 1 1) Corrosion resistance class CRC 1 to Festo standard FN Low corrosion stress. For dr indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions). Materials Sectional view Materials Push-in fitting QB/QBF/QBL/QBLL/QBLF/QBLV/QBT/QBTL/QBY 1 Release ring POM (colour: gre) 2 Tubing seal NBR 3 Housing QB/QBF Nickel-plated brass QBL/QBLL/QBLF/QBLV/ PBT QBT/QBTL/QBY 4 Tube retaining claw High-allo stainless steel 5 Threaded plug QBL/QBLL/QBLF/QBT/ Nickel-plated brass QBTL/QBY Hollow bolt QBLV Nickel-plated brass Threaded seal ( onl) PTFE Note on materials Contains PWIS (paint-wetting impairment substances) RoHS-compliant Push-in connector QB/QBS/QBL/QBT/QBX/QBY, multiple distributor QBT3 1 Release ring POM (colour: gre) 2 Tubing seal NBR 3 Housing QBS Nickel-plated brass QB/QBL/QBT/QBT3/QBX/ PBT QBY 4 Tube retaining claw High-allo stainless steel Nut QBS Nickel-plated brass Note on materials Contains PWIS (paint-wetting impairment substances) RoHS-compliant Push-in sleeve QBH, blanking plug QBC 3 Housing PBT Note on materials Contains PWIS (paint-wetting impairment substances) RoHS-compliant 2 Internet: Subject to change 2018/05
3 Product range overview Design Version Tpe Connection D1 Connection D2 Page/ UNF thread Tubing Push-in sleeve Tubing Push-in sleeve Internet Inline Push-in fitting Male thread with external hex QB Â, Ã, ¼ 8 x Â, Ã, ¼,, ¼ Â, Ã, ¼,,, ¼,,,,, Push-in fitting Female thread with external hex QBF x Â, Ã, ¼,, ¼ Â, Ã, ¼,,, ¼,,,, 10 Push-in connector QB- -T  11 à ¼ QB- -T reducing à  ¼ Â, à Â, ¼ ¼, Push-in bulkhead connector QBS- T  12 à ¼ 2018/05 Subject to change Internet: 3
4 Product range overview Design Version Tpe Connection D1 Connection D2 Page/ UNF thread Tubing Push-in sleeve Tubing Push-in sleeve Internet Inline Push-in connector with push-in sleeve QB- H x ¼ 13  x, ¼ ¼ x,  Â, ¼ ¼, Push-in sleeve QBH reducing à  13 ¼ Â, à ¼ ¼, Blanking plug QBC- H  14 à ¼ 4 Internet: Subject to change 2018/05
5 Product range overview Design Version Tpe Connection D1 Connection D2 Page/ UNF thread Tubing Push-in sleeve Tubing Push-in sleeve Internet L-shape Push-in L-fitting Male thread with external hex QBL Â, Ã, ¼ 15 x Â, Ã, ¼,, ¼ Â, Ã, ¼,,, Ã, ¼,,,, Push-in L-fitting (long) Male thread with external hex QBLL x Â, Ã, ¼, ¼ Â, Ã, ¼,,, Ã, ¼,,,, 16 Push-in L-fitting Female thread with external hex QBLF Â, ¼ 17 x Â, Ã, ¼, ¼ Â, Ã, ¼,, ¼,,,, Push-in L-fitting Male thread with external hex QBLV x, Â, Ã, ¼ 18 x Â, Ã, ¼, ¼ Â, Ã, ¼,, Ã, ¼,,,,, Push-in L-connector QBL- T Â 19 Ã ¼ 2018/05 Subject to change Internet: 5
6 Product range overview Design Version Tpe Connection D1 Connection D2 Page/ UNF thread Tubing Push-in sleeve Tubing Push-in sleeve Internet T-shape Push-in T-fitting Male thread with external hex QBT Â, Ã, ¼ 20 x Â, Ã, ¼,, ¼ Â, Ã, ¼,,, Ã, ¼,,,, Push-in T-connector QBT- T Â 21 Ã ¼ QBT- T reducing ¼ Â ¼ ¼, Multiple distributor 3 outlets QBT3- T reducing Ã, ¼, Â 22 Ã, ¼ Push-in T-fitting Male thread with external hex QBTL Â, Ã, ¼ 23 x Â, Ã, ¼,, ¼ Â, Ã, ¼,,, Ã, ¼,,,, 6 Internet: Subject to change 2018/05
7 Product range overview Design Version Tpe Connection D1 Connection D2 Page/ UNF thread Tubing Push-in sleeve Tubing Push-in sleeve Internet X-shape Push-in X-connector QBX- T   24 à ¼ Y-shape Push-in Y-fitting Male thread with external hex QBY Â, Ã, ¼ 25 x Â, Ã, ¼,, ¼ Â, Ã, ¼,,, Ã, ¼,,,,, Push-in Y-connector QBY- T  26 à ¼ QBY- T reducing à  ¼ Â, à Â, ¼ ¼,, 2018/05 Subject to change Internet: 7
8 Push-in fitting QB Male thread with external hex Male thread For tubing size D5 L1 L2 ß1 ß2 UNF thread UNF / /16 3/ QB UNF-5/32-U 10 3/ /16 3/ QB UNF-3/16-U 10 1/ /2 3/ QB UNF-1/4-U 10 NPT1/8-27 5/ /16 1/ QB-1/8-5/32-U 10 3/ /16 1/ QB-1/8-3/16-U 10 1/ /2 3/ QB-1/8-1/4-U 10 5/ /16 3/ QB-1/8-5/16-U 10 3/ /16 3/ QB-1/8-3/8-U 10 NPT1/4-18 5/ /16 1/ QB-1/4-5/32-U 10 3/ /16 1/ QB-1/4-3/16-U 10 1/ /16 3/ QB-1/4-1/4-U 10 5/ /16 1/ QB-1/4-5/16-U 10 3/ /16 1/ QB-1/4-3/8-U 10 1/ /8 1/ QB-1/4-1/2-U 10 NPT3/8-18 1/ /16 3/ QB-3/8-1/4-U 10 5/ /16 1/ QB-3/8-5/16-U 10 3/ /16 5/ QB-3/8-3/8-U 5 1/ /8 3/ QB-3/8-1/2-U 5 NPT1/2-14 5/ /8 1/ QB-1/2-5/16-U 10 3/ /8 5/ QB-1/2-3/8-U 5 1/ /8 3/ QB-1/2-1/2-U 5 8 Internet: Subject to change 2018/05
9 Push-in fitting QB- -I Male thread with internal hex UNF NPT Male thread For tubing size D5 H1 H2 H3 ß UNF thread UNF / / QB UNF-3/16-I-U 10 1/ / QB UNF-1/4-I-U 10 NPT1/8-27 5/ / QB-1/8-5/32-I-U 10 3/ / QB-1/8-3/16-I-U 10 1/ / QB-1/8-1/4-I-U 10 5/ / QB-1/8-5/16-I-U 10 NPT1/4-18 1/ / QB-1/4-1/4-I-U 10 5/ / QB-1/4-5/16-I-U 10 3/ / QB-1/4-3/8-I-U 10 NPT3/8-18 5/ / QB-3/8-5/16-I-U 10 3/ / QB-3/8-3/8-I-U 10 1/ / QB-3/8-1/2-I-U 10 NPT1/2-14 1/ / QB-1/2-1/2-I-U /05 Subject to change Internet: 9
10 Push-in fitting QBF Female thread with external hex Female For tubing size D5 L1 L2 ß thread NPT1/8-27 5/ / QBF-1/8-5/32-U 10 3/ / QBF-1/8-3/16-U 10 1/ / QBF-1/8-1/4-U 10 5/ / QBF-1/8-5/16-U 10 3/ / QBF-1/8-3/8-U 10 NPT1/4-18 5/ / QBF-1/4-5/32-U 10 3/ / QBF-1/4-3/16-U 10 1/ / QBF-1/4-1/4-U 10 5/ / QBF-1/4-5/16-U 10 3/ / QBF-1/4-3/8-U 10 1/ / QBF-1/4-1/2-U 5 NPT3/8-18 1/ / QBF-3/8-1/4-U 10 5/ / QBF-3/8-5/16-U 10 3/ / QBF-3/8-3/8-U 10 1/ / QBF-3/8-1/2-U 5 NPT1/2-14 5/ / QBF-1/2-5/16-U 10 3/ / QBF-1/2-3/8-U 5 10 Internet: Subject to change 2018/05
11 Push-in connector QB- T Reducing For tubing For tubing size D5 D6 H1 L1 5/ QB-5/32T-U 10 3/ QB-3/16T-U 10 1/ QB-1/4T-U 10 5/ QB-5/16T-U 10 3/ QB-3/8T-U 10 1/ QB-1/2T-U 5 Reducing 3/16 5/ QB-3/16T-5/32-U 10 1/4 5/ QB-1/4T-5/32-U 10 3/ QB-1/4T-3/16-U 10 5/16 5/ QB-5/16T-5/32-U 10 1/ QB-5/16T-1/4-U 10 3/8 1/ QB-3/8T-1/4-U 10 5/ QB-3/8T-5/16-U 10 1/2 3/ QB-1/2T-3/8-U /05 Subject to change Internet: 11
12 Push-in bulkhead connector QBS- T For tubing size D5 L1 L2 ß D1 [in] [oz] 5/ M12x QBS-5/32T-U 10 3/ M14x QBS-3/16T-U 10 1/ M14x QBS-1/4T-U 10 5/ M16x QBS-5/16T-U 10 3/ M20x QBS-3/8T-U 5 1/ M22x QBS-1/2T-U 5 12 Internet: Subject to change 2018/05
13 Push-in connector QB- H with push-in sleeve Push-in For tubing size D5 L1 L2 sleeve 1/8 1/ QB-1/8H-1/4-U 10 5/32 1/ QB-5/32H-1/8-U 10 1/ QB-5/32H-1/4-U 10 1/4 1/ QB-1/4H-1/8-U 10 5/ QB-1/4H-5/32-U 10 5/16 5/ QB-5/16H-5/32-U 10 1/ QB-5/16H-1/4-U 10 3/8 1/ QB-3/8H-1/4-U 10 5/ QB-3/8H-5/16-U 10 1/2 3/ QB-1/2H-3/8-U 10 Push-in sleeve QBH Reducing Push-in sleeve Push-in sleeve size L1 L2 Reducing 3/16 5/ QBH-3/16-5/32-U 10 1/4 5/ QBH-1/4-5/32-U 10 3/ QBH-1/4-3/16-U 10 5/16 1/ QBH-5/16-1/4-U 10 3/8 1/ QBH-3/8-1/4-U 10 5/ QBH-3/8-5/16-U 10 1/2 3/ QBH-1/2-3/8-U /05 Subject to change Internet: 13
14 Blanking plug QBC- H Pneumatic connection Push-in sleeve D5 L1 L2 D1 [oz] 5/32 5/ QBC-5/32H-U 10 3/16 3/ QBC-3/16H-U 10 1/4 1/ QBC-1/4H-U 10 5/16 5/ QBC-5/16H-U 10 3/8 3/ QBC-3/8H-U 10 1/2 1/ QBC-1/2H-U Internet: Subject to change 2018/05
15 Push-in L-fitting QBL Male thread with external hex Male thread For tubing size D5 H1 H2 L1 ß UNF thread UNF / / QBL UNF-5/32-U 10 3/ / QBL UNF-3/16-U 10 1/ / QBL UNF-1/4-U 10 NPT1/8-27 5/ / QBL-1/8-5/32-U 10 3/ / QBL-1/8-3/16-U 10 1/ / QBL-1/8-1/4-U 10 5/ / QBL-1/8-5/16-U 10 3/ / QBL-1/8-3/8-U 10 NPT1/4-18 5/ / QBL-1/4-5/32-U 10 3/ / QBL-1/4-3/16-U 10 1/ / QBL-1/4-1/4-U 10 5/ / QBL-1/4-5/16-U 10 3/ / QBL-1/4-3/8-U 5 1/ / QBL-1/4-1/2-U 5 NPT3/8-18 3/ , / QBL-3/8-3/16-U 10 1/ / QBL-3/8-1/4-U 5 5/ / QBL-3/8-5/16-U 5 3/ / QBL-3/8-3/8-U 5 1/ / QBL-3/8-1/2-U 5 NPT1/2-14 3/ / QBL-1/2-3/8-U 5 1/ / QBL-1/2-1/2-U /05 Subject to change Internet: 15
16 Push-in long L-fitting QBLL Male thread with external hex Male thread For tubing size D5 H1 H2 L1 ß NPT1/8-27 5/ / QBLL-1/8-5/32-U 10 3/ / QBLL-1/8-3/16-U 10 1/ / QBLL-1/8-1/4-U 10 5/ / QBLL-1/8-5/16-U 10 NPT1/4-18 5/ / QBLL-1/4-5/32-U 10 3/ / QBLL-1/4-3/16-U 10 1/ / QBLL-1/4-1/4-U 10 5/ / QBLL-1/4-5/16-U 10 3/ / QBLL-1/4-3/8-U 5 1/ / QBLL-1/4-1/2-U 5 NPT3/8-18 3/ / QBLL-3/8-3/16-U 10 1/ / QBLL-3/8-1/4-U 10 5/ / QBLL-3/8-5/16-U 5 3/ / QBLL-3/8-3/8-U 5 1/ / QBLL-3/8-1/2-U 5 NPT1/2-14 3/ / QBLL-1/2-3/8-U 5 1/ / QBLL-1/2-1/2-U 5 16 Internet: Subject to change 2018/05
17 Push-in L-fitting QBLF Female thread with external hex Female For tubing size D5 H1 H2 L1 ß thread UNF thread UNF / / QBLF UNF-5/32-U 10 1/ / QBLF UNF-1/4-U 10 NPT1/8-27 5/ / QBLF-1/8-5/32-U 10 3/ / QBLF-1/8-3/16-U 10 1/ / QBLF-1/8-1/4-U 10 5/ / QBLF-1/8-5/16-U 10 NPT1/4-18 5/ / QBLF-1/4-5/32-U 10 3/ / QBLF-1/4-3/16-U 10 1/ / QBLF-1/4-1/4-U 10 5/ / QBLF-1/4-5/16-U 5 3/ / QBLF-1/4-3/8-U 5 NPT3/8-18 1/ / QBLF-3/8-1/4-U 10 5/ / QBLF-3/8-5/16-U 5 3/ / QBLF-3/8-3/8-U 5 1/ / QBLF-3/8-1/2-U 5 NPT1/2-14 3/ / QBLF-1/2-3/8-U 5 1/ / QBLF-1/2-1/2-U /05 Subject to change Internet: 17
18 Push-in L-fitting QBLV Male thread with external hex Male thread For tubing size D5 H1 H2 L1 ß UNF thread UNF / / QBLV UNF-1/8-U 10 5/ / QBLV UNF-5/32-U 10 3/ / QBLV UNF-3/16-U 10 1/ / QBLV UNF-1/4-U 10 NPT1/8-27 5/ / QBLV-1/8-5/32-U 10 3/ / QBLV-1/8-3/16-U 10 1/ / QBLV-1/8-1/4-U 10 5/ / QBLV-1/8-5/16-U 10 NPT1/4-18 5/ / QBLV-1/4-5/32-U 10 3/ / QBLV-1/4-3/16-U 10 1/ / QBLV-1/4-1/4-U 10 5/ / QBLV-1/4-5/16-U 10 3/ / QBLV-1/4-3/8-U 5 NPT3/8-18 3/ / QBLV-3/8-3/16-U 10 1/ / QBLV-3/8-1/4-U 5 5/ / QBLV-3/8-5/16-U 5 3/ / QBLV-3/8-3/8-U 5 1/ / QBLV-3/8-1/2-U 5 NPT1/2-14 5/ / QBLV-1/2-5/16-U 5 3/ / QBLV-1/2-3/8-U 5 1/ / QBLV-1/2-1/2-U 5 18 Internet: Subject to change 2018/05
19 Push-in L-connector QBL- T For tubing size D5 D6 H1 D1 [in] [oz] 5/ QBL-5/32T-U 10 3/ QBL-3/16T-U 10 1/ QBL-1/4T-U 10 5/ QBL-5/16T-U 10 3/ QBL-3/8T-U 10 1/ QBL-1/2T-U /05 Subject to change Internet: 19
20 Push-in T-fitting QBT Male thread with external hex Male thread For tubing size D5 H1 H2 L1 ß UNF thread UNF / / QBT UNF-5/32-U 10 3/ / QBT UNF-3/16-U 10 1/ / QBT UNF-1/4-U 10 NPT1/8-27 5/ / QBT-1/8-5/32-U 10 3/ / QBT-1/8-3/16-U 10 1/ / QBT-1/8-1/4-U 10 5/ / QBT-1/8-5/16-U 5 3/ / QBT-1/8-3/8-U 5 NPT1/4-18 5/ / QBT-1/4-5/32-U 10 3/ / QBT-1/4-3/16-U 10 1/ / QBT-1/4-1/4-U 5 5/ / QBT-1/4-5/16-U 5 3/ / QBT-1/4-3/8-U 5 1/ / QBT-1/4-1/2-U 5 NPT3/8-18 3/ / QBT-3/8-3/16-U 10 1/ / QBT-3/8-1/4-U 5 5/ / QBT-3/8-5/16-U 5 3/ / QBT-3/8-3/8-U 5 1/ / QBT-3/8-1/2-U 1 NPT1/2-14 3/ / QBT-1/2-3/8-U 5 1/ / QBT-1/2-1/2-U 1 20 Internet: Subject to change 2018/05
21 Push-in T-connector QBT- T Reducing For tubing For tubing size D5 D6 D7 H1 H2 L1 L2 5/32 5/ QBT-5/32T-U 10 3/16 3/ QBT-3/16T-U 10 1/4 1/ QBT-1/4T-U 10 5/16 5/ QBT-5/16T-U 10 3/8 3/ QBT-3/8T-U 5 1/2 1/ QBT-1/2T-U 5 Reducing 1/4 5/ QBT-1/4T-5/32-U 10 5/16 1/ QBT-5/16T-1/4-U 10 3/8 1/ QBT-3/8T-1/4-U 10 5/ QBT-3/8T-5/16-U 10 1/2 3/ QBT-1/2T-3/8-U /05 Subject to change Internet: 21
22 Multiple distributor QBT3- T 3 outlets For tubing For tubing size D5 D6 D7 H1 H2 L1 L2 3/16 5/ QBT3-3/16T-5/32-U 5 1/4 5/ QBT3-1/4T-5/32-U 5 5/16 5/ QBT3-5/16T-5/32-U 5 3/ QBT3-5/16T-3/16-U 5 1/ QBT3-5/16T-1/4-U 5 3/8 1/ QBT3-3/8T-1/4-U 5 5/ QBT3-3/8T-5/16-U 5 22 Internet: Subject to change 2018/05
23 Push-in T-fitting QBTL Male thread with external hex Male thread For tubing size D5 H1 H2 L1 ß UNF thread UNF / / QBTL UNF-5/32-U 10 3/ / QBTL UNF-3/16-U 10 1/ / QBTL UNF-1/4-U 10 NPT1/8-27 5/ / QBTL-1/8-5/32-U 10 3/ / QBTL-1/8-3/16-U 10 1/ / QBTL-1/8-1/4-U 10 5/ / QBTL-1/8-5/16-U 10 3/ / QBTL-1/8-3/8-U 5 NPT1/4-18 5/ / QBTL-1/4-5/32-U 10 3/ / QBTL-1/4-3/16-U 10 1/ / QBTL-1/4-1/4-U 10 5/ / QBTL-1/4-5/16-U 10 3/ / QBTL-1/4-3/8-U 5 1/ / QBTL-1/4-1/2-U 5 NPT3/8-18 3/ / QBTL-3/8-3/16-U 10 1/ / QBTL-3/8-1/4-U 10 5/ / QBTL-3/8-5/16-U 10 3/ / QBTL-3/8-3/8-U 5 1/ / QBTL-3/8-1/2-U 5 NPT1/2-14 3/ / QBTL-1/2-3/8-U 5 1/ / QBTL-1/2-1/2-U /05 Subject to change Internet: 23
![Push-in X-connector QBX- T For tubing size D5 D6 H1 L1 L2 D1 [in] [oz] 5/32 0.102 0.413 0.130 0.707 1.413 0.500 0.289 564778 QBX-5/32T-U 10 3/16 0.138 0.453 0.138 0.782 1.567 0.591 0.](/docs-images/82/85822007/images/24-0.jpg "275 564779 QBX-3/16T-U 10 1/4 0.197 0.512 0.130 0.838 1.677 0.642 0.381 564780 QBX-1/4T-U 10 5/16 0.236 0.571 0.165 0.896 1.795 0.717 0.557 564781 QBX-5/16T-U 5 3/8 0.276 0.689 0.169 0.951 1.906 0.")
24 Push-in X-connector QBX- T For tubing size D5 D6 H1 L1 L2 D1 [in] [oz] 5/ QBX-5/32T-U 10 3/ QBX-3/16T-U 10 1/ QBX-1/4T-U 10 5/ QBX-5/16T-U 5 3/ QBX-3/8T-U 5 1/ QBX-1/2T-U 5 24 Internet: Subject to change 2018/05
25 Push-in Y-fitting, QBY Male thread with external hex Male thread For tubing size D5 H1 L1 L2 ß UNF thread UNF / / QBY UNF-5/32-U 10 3/ / QBY UNF-3/16-U 10 1/ / QBY UNF-1/4-U 10 NPT1/8-27 5/ / QBY-1/8-5/32-U 10 3/ / QBY-1/8-3/16-U 10 1/ / QBY-1/8-1/4-U 10 5/ / QBY-1/8-5/16-U 10 3/ / QBY-1/8-3/8-U 5 NPT1/4-18 5/ / QBY-1/4-5/32-U 10 3/ / QBY-1/4-3/16-U 10 1/ / QBY-1/4-1/4-U 10 5/ / QBY-1/4-5/16-U 10 3/ / QBY-1/4-3/8-U 5 1/ / QBY-1/4-1/2-U 5 NPT3/8-18 3/ / QBY-3/8-3/16-U 10 1/ / QBY-3/8-1/4-U 10 5/ / QBY-3/8-5/16-U 10 3/ / QBY-3/8-3/8-U 5 1/ / QBY-3/8-1/2-U 5 NPT1/2-14 5/ / QBY-1/2-5/16-U 5 3/ / QBY-1/2-3/8-U 5 1/ / QBY-1/2-1/2-U /05 Subject to change Internet: 25
26 Push-in Y-connector QBY- T Reducing For tubing For tubing size D5 D6 D7 H1 L1 5/32 5/ QBY-5/32T-U 10 3/16 3/ QBY-3/16T-U 10 1/4 1/ QBY-1/4T-U 10 5/16 5/ QBY-5/16T-U 10 3/8 3/ QBY-3/8T-U 5 1/2 1/ QBY-1/2T-U 5 Reducing 3/16 5/ QBY-3/16T-5/32-U 10 1/4 5/ QBY-1/4T-5/32-U 10 3/ QBY-1/4T-3/16-U 10 5/16 5/ QBY-5/16T-5/32-U 10 1/ QBY-5/16T-1/4-U 10 3/8 1/ QBY-3/8T-1/4-U 10 5/ QBY-3/8T-5/16-U 10 1/2 5/ QBY-1/2T-5/16-U 5 3/ QBY-1/2T-3/8-U 5 26 Internet: Subject to change 2018/05
27 Festo North America 1 Festo Canada 2 Montréal 3 Québec Cit Headquarters Festo Inc Explorer Drive ississauga, O LW , Trans-Canada Pointe-Claire, QC , rue Watt11 Québec, QC Festo United States 5 Appleton 7 etroit Headquarters Festo Corporation 395 Moreland Road orth 9 Tower iew Drive, Suite Greenville, WI 59 auppauge, 11 6 Chicago 8 5 W Algonquin - Suite 30 Arlington eights, IL West Long Lake Road Tro, MI 09 Silicon Valle 935 Southfront Road, Suite F Livermore, CA 9550 Festo Regional Contact Center Canadian Customers Commercial Support: Tel: 1 O FESTO Fax: 1 F FESTO festocanadacafestocom USA Customers Commercial Support: Tel: FESTO Fax: FESTO customerserviceusfestocom Technical Support: Tel:1 O FESTO Fax:1 F FESTO technicalsupportcafestocom Technical Support: Tel:1 O FESTO Fax:100 9 FESTO productsupportusfestocom C Subect to change Internet:
Push-in fittings QB, NPT
General technical data Connecting thread UNF NPT Size Standard Design Push-pull principle Mounting position An Tpe of seal on threaded plug Sealing ring Coating Operating and environmental conditions Operating
Push-in fittings CQ, for push-fit piping systems
Key features General information Suitable for polyamide pipes PQ-PA and aluminium pipes PQ-AL O.D. 12, 15, 18, 22 and 28 mm Internet: pq Suitable for polyamide tubing PAN and polyurethane tubing PUN O.D.
Exhaust air flow control valves
Exhaust air flow control valves Exhaust air flow control valves Product range overview Function Exhaust air flow control valves are screwed into the exhaust controls of control valves or drives. They enable
Hand slide valves W/VBOH
Hand slide valves W/VBOH Hand slide valves W/VBOH Product range overview Version Valve function Version Type Pneumatic connection 1 Pneumatic connection 2 qnn Page/ Internet [l/min] Hand slide valves 3/2-way,
Push-in fittings CRQS, stainless steel
Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard and
Bernoulli grippers OGGB
Key features General Purpose Benefits Applications The Bernoulli gripper OGGB is ideally suited to transporting thin, extremely delicate and brittle workpieces. Minimised workpiece contact, gentle workpiece
Angle grippers HGWM, micro
Key features G6: G7: G8: with stroke compensation with male thread with clamping spigot At a glance Compact, handy design With open or closed gripper jaws Versatility thanks to externally adaptable gripper
Precision one-way flow control valves GRP
Product range overview and type codes Product range overview Version Valve function Version Type Connection direction Precision one-way flow control valve Metal One-way flow control function Pneumatic
Parallel grippers HGPM, micro
Key features G6: G8: G9: with stroke compensation with clamping spigot with flange mounting At a glance Compact, handy design With open or closed gripper jaws Versatility thanks to externally adaptable
Adaptive gripper fingers DHAS
Features At a glance Adaptive gripper fingers for smooth and flexible gripping, with the Fin Ray Effect derived from the movement of a fish s tail fin. Two flexible bands, which meet at the top like a
Pressure gauges Product range overview
Pressure gauges Pressure gauges Product range overview Type Pneumatic connection Nominal size Display unit Red/ Outer scale Inner scale green bar MPa psi bar MPa psi range Page/ Internet Pressure gauge
Push-in fittings NPQH
Key features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard
Push-in fittings NPQH
Key features Application Effortless selection of the right fitting. Quick Star offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard
Hand slide valves W/VBOH
Hand slide valves W/VBOH Hand slide valves W/VBOH Product range overview Version Valve function Version Type Pneumatic connection 1 Pneumatic connection 2 qnn Page/ Internet [l/min] Hand slide valves 3/2-way,
Push-in fittings CRQS, stainless steel
Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard and
Parallel grippers HGPT-B, heavy-duty
Key features Advantages compared with the parallel gripper HGPT Space-optimised: Choice of shorter housing without gripping force retention or longer housing with gripping force retention Increased gripping
Solenoid valves CDSV, Clean Design
Key features Innovative Versatile Reliable Proven valve technology combined with a highly resistant polymer material. valve position 2 solenoid coils Flow rate 300 650 l/min Valve width 24 mm Connected
Solenoid valves VZWF, force pilot operated
Key features and overview Function Normally closed solenoid valve with diaphragm and forced lifting. When the solenoid is energised, the differential pressure from the secondary side of the diaphragm is
PN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12
PN LINE PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN
Precision pressure regulators LRP/LRPS
Precision pressure regulators LRP/LRPS q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
Hand lever valves VHER
Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:
Fluidic Muscle DMSP/MAS
Fluidic Muscle DMSP/MAS Fluidic Muscle DMSP/MAS Key features Mode of operation Fluidic Muscle is a tensile actuator which mimics the natural movement of a muscle. It consists of contractible tubing and
Pressure boosters DPA
Key features Function The pressure booster is a twin-piston pressure intensifier intended solely for compressing air. When the DPA is pressurised with compressed air, integrated non-return valves automatically
Bellows actuator EB Key features
Bellows actuator B Bellows actuator B Key features Key features Suitable for use in harsh, dusty ambient conditions Can be used under water Sturdy design Large forces range from 1 50 KN Low installation
Proportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
Parallel grippers HGPM, micro
Key features G6: G8: G9: stroke compensation clamping spigot flange mounting At a glance Compact, handy design With open or closed gripper jaws Versatility thanks to externally adaptable gripper fingers
CONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint
Super-rapid fittings for plastic tubes Series 6000 Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3, M5, M6, M7), BSP (G1/8, G1/, G3/8, G1/2, G3/), BSPT (R1/8,
Heavy-duty three-point grippers HGDT
Key features At a glance The force generated by the linear motion is translated into the gripper jaw movement via a force-guided triple wedge mechanism. This also guarantees synchronous movement of the
Piloted Non-Return Valves
ed Non-Return Valves ed non-return valves are designed to protect installations: if the compressed air supply is removed, they lock the air supply to the cylinder, thus maintaining it in position. Product
STC. Push-In Fittings & Polyurethane Tubing. Fine Quality. Precision Engineered Advanced Design. Excellent Prices
Precision Engineered Advanced Design Push-In Fittings & Polyurethane Tubing Catalog: PUB 2012 PUB 07 FIT STC Push-In Fittings & Polyurethane Tubing Fine Quality Excellent Prices A 1 connects fluid power
Coiling Tube with Twist-Proof Fitting
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Anti-Twisting Coiling Tube for Air Tool Coiling Tube with Twist-Proof Fitting 306 Avoid Twisted Tube Problem
Valves, manually operated
Valves, manually operated Valves, manually operated Key features VHEM-P K/O-3-PK-3 H-3-¼-B KH/O-3-PK3 TH/O-3-PK3 F-3-¼-B Innovative Versatile Reliable Easy to mount Small and compact for a wide range of
Valves, manually operated
Valves, manually operated Valves, manually operated Key features VHEM-P K/O-3-PK-3 H-3-¼-B KH/O-3-PK3 TH/O-3-PK3 VHEM-L F-3-¼-B Innovative Versatile Reliable Easy to mount Small and compact for a wide
Cautions : 1. Be careful when you release the Stop Fitting with some internal pressure
The flow-shut mechanism will operate to stop the air flow when the tube is disconnected and will allow air flow when the tube is connected. The double-passage structure facilitates easy connection and
C 0G 00 N/US
G, GP, G, GP In-line flow regulators (block form) Uni-directional Ø /... / inch, Ø 4... mm High flow performance In-line or panel mounting Adjustment can be locked aptive regulator needle will not blow
Push-In Fitting Type with Stop Valve
http://www.pisco.co.jp Push-In Fitting Type with Stop Valve 278 Push-In Fitting Type with Stop Valve for General Pneumatic Piping. Air Stop by Tube Disconnection. Easy Insertion and Disconnection by Double-passage
SCHRADER TANK VALVES FOR USE IN AIR BLADDER APPLICATIONS, BICYCLE SUSPENSION SYSTEMS, TELECOMMUNICATIONS, WATER STORAGE SYSTEMS, ETC.
SCHRADER TANK VALVES FOR USE IN AIR BLADDER APPLICATIONS, BICYCLE SUSPENSION SYSTEMS, TELECOMMUNICATIONS, WATER STORAGE SYSTEMS, ETC. Demand an authentic Schrader valve built by the company that set the
(1) Type (2) Thread size (T) (3) Wrench size specification : inch spec. (NPT, UNF) : mm spec. (M, R)
This exhaust needle valve, which comes with silencer, controls the exhaust flow rate. The valve can be attached directly to a solenoid valve where a cylinder or like mechanism has no sufficient space around
screw fittings - nickel plated brass series SC
screw fittings - nickel plated brass series SC SC SCC SC SC SC SC SC SCC SC SC SC SCC SC SC SC2C SC2 SC2 SC SC3 SC3 SC0 SC design screw fitting with swivel nut connection 1/"...1/2" optionally cylindrical
// ADapters GUIDelines
// ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall
Cautions : 1. Clogging of the element raises resistance to exhaust, thus lowering the
The Silencer, connected to the exhaust port of a device, suppresses the exhaust noise. The Silencer displays an excellent noise suppression effect. Three types are available for your selection. The element
Type Pressure Regulator. for increased air capacity. Fig. 1: Type Pressure Regulator. Mounting and Operating Instructions EB EN
Type 4708-45 Pressure Regulator for increased air capacity Fig. 1: Type 4708-45 Pressure Regulator Mounting and Operating Instructions EB 8546-1 EN Edition March 2010 Definition of the signal words used
Industrial Products Catalog Tank Valves
Industrial Products Catalog Tank Valves Schrader International core competencies include high volume precision machining, assembly and testing of fluid control devices. Since developing the first pneumatic
FITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI
Jetstream offers a wide variety of fittings with various connection types to fit your 20,000 psi application needs. The standard connection types, Type M, MP, and MP Tube lance, are available in standard
Hand Valve Series. Push-In Fitting Type Shut-off Valve (Residual Pressure Release Valve) Control Open/Close for Air Supply.
http://www.pisco.co.jp VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Shut-off Valve (Residual Pressure Release Valve) Hand Valve Series 556 Control Open/Close for Air Supply. Release Residual
Mounting and Operating Instructions EB EN. Type Supply Pressure Regulator. with increased air capacity
Type 4708-45 Supply Pressure Regulator with increased air capacity Translation of original instructions Mounting and Operating Instructions EB 8546-1 EN Edition March 2016 Note on these mounting and operating
Pressure Gauge Series
Pressure Gauge Series Compact Design. Connection type In line Plug in Panel mount Threaded Model Designation (Example) GP C 15 U10 U 1 Type Pressure Gauge 1 Type 2 Series 4 Wrench size 3 Thread size/ Tube
Fluidic Muscle DMSP Key features
Key features Mode of operation Fluidic Muscle is a tensile actuator which mimics the natural movement of a muscle. It consists of contractible tubing and appropriate connectors. The contractible tubing
Propor tional Re lief Valve s
www.swagelok.com Propor tional Re lief Valve s R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections Proportional Relief Valves
Micro grippers HGPM/HGWM
HGPM/HGWM Miniaturised and optimised for assembly tasks Versatile 2004/10 Subject to change Products 2004/2005 1 / 1 HGPM/HGWM Key features HGWM HGPM 1 2 3 4 1 2 3 4 System product for handling and assembly
Ball Valve Series. Push-In Fitting Type Shut-off Valve. Control Open/Close Air Supply. Ensure Effective Area for Variety of Tube Dia.
http://www.pisco.co.jp VALVE TUBE MAKE-TO-ORDER PRODUTS Push-In Fitting Type Shut-off Valve Ball Valve Series 564 ontrol Open/lose Air Supply. Ensure Effective Area for Variety of Tube Dia. Easily Adjustable
Cautions : 1. The gauge orientation on the GPU and GPM types can be changed by using
The compact-size pressure gauge can be installed in small spaces. With the built-in tube fitting type, tube connection is the only necessary step before pressure indication. Fluid medium Indicated pressure
1305 Series Pressure Reducing Regulators
Instruction Manual Form 1095 1305 Series October 2009 1305 Series Pressure Reducing Regulators! Warning Fisher regulators must be installed, operated, and maintained in accordance with federal, state,
Change Valve. Push-In Fitting Type Three-way Changeover Valve. Changeover Air Direction by 90. Lightweight and Compact Design.
http://www.pisco.co.jp VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Three-way Changeover Valve Change Valve Changeover Air Direction by 90 Lightweight and Compact Design. Fine Operability and
Pressure Dump Valve Service Kit for Series 2300 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit
Prestolok PLM Metal Push-to-Connect Fittings
Prestolok PM Metal Push-to-Connect ittings To meet your technical and environment requirements, Parker s Prestlok PM fittings offers the robustness, reliability and resistance to industrial fluids for
Diaphragm Accumulators
1. DESCRIPTION 1.1. FUNCTION Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas is utilised in hydro-pneumatic accumulators for storing fluids.
Push-In Fitting Type Pressure Gauge
http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type 526 Compact Design. Pressure Indication by Tube Insertion into Push-In Fitting. Check Valve Silencer Controller
Binks SG-2 Plus TM 2 QT. PRESSURE CUPS Model No (Standard) Model No (with OscillatingAgitator)
INTRODUCTION Binks SG-2 Plus TM Pressure Cup is ideal for component spraying and industrial applications where small batch production spraying is required. The 2 qt. capacity is sufficient to complete
(1) Type. (2) Tube dia. (ød) : ø8mm (ø5/16in.) (3) Thread size (T) (4) Specification. Fluid medium. Air, water * 1, * 2, * 3 Max. operating pressure
This type of tube fitting comes in eight lengths to suit your applications. The tube fitting, provided with a hexagonal hole, can be easily installed using an Allen wrench, even in a narrow or limited
KDV HIGH ACCURACY GLASS TUBE ROTAMETER
KDV HIGH ACCURACY GLASS TUBE ROTAMETER Flow Pressure Level Temperature measurement monitoring control S2 Industrial and Sanitary Designs Body Sizes 1/2 Through 2 Reliable, Time Proven Glass Tube Design
(1) Type (2) Tube dia. (ød(1)) (3) Thread size (T) (4) Wrench size specification : inch spec. (NPT, UNF) : mm spec. (M, R)
When the primary pressure is introduced from the thread side, a reduced pressure comes out from the joint side. The compact desigh with a built-in quick-fitting joint makes flexibe layout possible. The
shutoff valves 900 Series psig Manual Shutoff Valves
0 6000 psig Manual Shutoff Valves Features Zero leakage Protected o-ring Full flow passages Freedom from wire drawing Panel mount standard Hand wheel or toggle handle How it Works Closed O-ring seal on
VEP Series VEP-BOP Series. canada.dixonvalve.com Customer Service:
UFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFAC VEP Series VEP-BOP Series Customer Service: 877.963.4966 Body Technical Specifications Pressure Rating Burst
Instructions. Control Solution ICF 20-4, ICF 25-4, ICF ICF 40-4, ICF 20-6, ICF 25-6, ICF 32-6, ICF 40-6, Direction and position.
027R9782 Instructions Control Solution ICF 20-4, ICF 25-4, ICF 32-4. ICF 40-4, ICF 20-6, ICF 25-6, ICF 32-6, ICF 40-6, Direction and position ICF xx-4 ICF xx-6 ICF xx-4 / ICF xx-6 with ICM ICM 027R9782
4/2 way Pneumatic Solenoid Valve
4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11
Pressure Dump Valve Service Kit for Series 3000 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator
(1) Type (2) Cylinder dia. (3) Gripper action : Single-acting closing gripper (normally open) (4) Holder type
These are air finger models featuring light weight and miniature size. Blank fingers are available for the K type fingers as option. R-guide leaves no possibility of misalignment. The blank finger can
Standard Specifications
NARM, 2 Ways of Connection Small Size Pressure Gauge ø5mm Reverse flow function available on the standard model Space Saving -B2 NARM-6A-NG Standard Specifications Fluid Proof pressure psig (MPa) Max.
Description Supply pressure Pressure range Connection Device Page max. bar bar thread
Pressure Regulators Supply pressure Pressure range onnection Device Page max. bar bar thread Maxi -Series, robust, interlockable 1 0. 1.8 / 17 G¼ - G1 R0, R1.0 made of plastic, also for liquids 1,5 0 4
Suitable for Semi-Conductor, Measuring Instrument, Printing and Medical Industries
http://www.pisco.co.jp AIR PREPARATION ACTUATOR PLARAILCHAIN HARMO ROBOT PARTS Suitable for Semi-Conductor, Measuring Instrument, Printing and Medical Industries 182 Filtering Accuracy:.1μm, Correcting
Bladder Accumulators High pressure
Bladder Accumulators High pressure 1. DESCRIPTION 1.1. FUNCTION Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas (nitrogen) is utilised in
INSTRUMENTATION VALVES
INSTRUMENTATION VALVES INSTRUMENTATION BALL VALVES INTEGRAL-BONNET NEEDLE VALVES TOGGLE VALVES (TG Series) CHECK VALVES (CHV Series: For General Industry) RELIEF VALVES (RVL/RVH Series) INSTRUMENTATION
Type 4708 Supply Pressure Regulator
Type 708 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point range 0.5 to bar (8 to 90 psi) The pressure regulator
2 Overview. SITRANS P measuring instruments for pressure. Transmitters for gage and absolute pressure. Z series for gage pressure
Z series for gage pressure Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and electronics plate Process connection Electrical connection
Rocky Mountain Instinct / Pipeline Alloy Frame Assembly Guide. Date: April 7, 2017
Rocky Mountain Instinct / Pipeline Alloy Frame Assembly Guide Date: April 7, 2017 1 Table of Contents Front Triangle Preparation... 4 Parts Needed... 4 Instructions... 4 Chain Stay Preparation... 6 Parts
57 Series Pg Pg Pg Pg Pg Pg Pg Pg Pg. 2.
57000 Pg. 2.5 57010 Pg. 2.5 57110 Pg. 2.5 57210 Pg. 2.5 57222 Pg. 2.6 57020 Pg. 2.6 57010 Pg. 2.6 57030 Pg. 2.6 57105 Pg. 2.7 57115 Pg. 2.7 57125 Pg. 2.7 57215 Pg. 2.8 57225 Pg. 2.8 57100 Pg. 2.8 57200
KDV HIGH ACCURACY GLASS TUBE ROTAMETER
KDV HIGH ACCURACY GLASS TUBE ROTAMETER Flow Pressure Level Temperature measurement monitoring control S2 Industrial and Sanitary Designs Body Sizes 1/2 Through 2 Reliable, Time Proven Glass Tube Design
patented standards SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE a n d ot h e r p e n di n g
SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE PREVO S1 couplings represent the latest generation of pneumatic connection mechanisms. They provide a fully safe response to the
Model SPCøD-T SPC4-M5 SPC4-M50 * 1 SPC4-M6 SPC4-02 SPC6-M5 SPC6-M6 SPC6-01 SPC6-02 SPC16-03
This series uses a special stainless steel, which corrosive resistance is equivalent to SUS303 stainless steel, made up Cr19~21%, and Mo1.5~2.5%. Accordingly, when strength is required it is suited to
Type 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulators used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to. bar ( to 4 psi). to bar (8 to 9 psi)
Mounting and Operating Instructions EB 8546 EN. Supply Pressure Regulator Type Fig. 1 Supply pressure regulators
Supply Pressure Regulator Type 4708 Type 4708-5352 on Type 3730 Positioner Type 4708-52 with filter receptacle Type 4708-6252 on Type 3372 ctuator Fig. Supply pressure regulators Mounting and Operating
Plant, components and devices for very high and high pressures (7000 bar and over)
Plant, components and devices for very high and high pressures (7000 bar and over) HIGH PRESSURE GAS BOOSTER INTRODUCTION Multi-coupling system gas booster operate on the simple but efficient principle
SPCH/ Blowing block
> > for linear stretch blow moulding machines > > Compact and safe design > > Best suited for PET bottles up to litres, depending on cycle time Technical features Medium: Compressed air (purity class 3..3
INSTALLATION & MAINTENANCE INSTRUCTIONS
DESCRIPTION / IDENTIFICATION The QBX series valve uses Proportion-Air closed loop technology for Pressure control. It gives an output pressure proportional to an electrical command signal input. The QB1X
PTR Series Track Roller Assembly Plain/Cylindrical Stud Type Concentric Ball & Tapered Roller Bearings
PTR Series Assembly A B C D F FL H SD SL T Width Hex Width + PTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 0.5 0.03 0.78 PTR-1.125 1.125 0.75 0.437 1.00 7/16-20 0.50 3/16 0.5 0.03 0.78 PTR-1.25 1.250
Model PCøD-TSUS PC4-M6SUS PC4-01SUS PC4-02SUS PC6-M5SUS PC6-M6SUS PC6-01SUS PC6-02SUS PC16-03SUS
This tube fitting serves best where strength is required or the atmosphere contains chemicals. (It can be used with chemicals depending on service conditions.) Fluid medium Air, water * 1, * 2, other *
Operating Procedures for GripTight 15.5 SDR & IPS Test Plugs
EST Group DC2518 08/01 REV 3 12/12 Page 1 of 6 Operating Procedures for GripTight SDR & IPS Test Plugs WARNING For proper operation, GripTight plugs must be assembled as shown in Figure 1. Pressure testing
Filtered compressed air, lubricated or non-lubricated. Maximum torque on each jaw on opening at 87 psi 3.1 in-lbf 10.6 in-lbf 20.
2-JAW SELF-CENTERING RADIAL PNEUMATIC GRIPPER (SERIES ) Double-acting. High gripping force at the end of the stroke. Maintenance-free long life and reliability. Various options for fastening. Optional
FTR Series Track Roller Assembly Flanged Stud Type Concentric Ball & Tapered Roller Bearings
FTR Series Track Assembly d Type Concentric Ball & Tapered Bearings Type Track A B C D F FL H L M SD SL T Hex Dia + FTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 1.38 0.22 0.5 0.03 0.78 FTR-1.125 1.125
PVC FASTTAP SADDLES for IPS Mains. Main Size OUTLET 1 FPT 3/4 CTS (7/8 OD) COMPRESSION 1 CTS (1 1/8 OD) COMPRESSION 3/4 IPS COMPRESSION
PVC FASTTAP SADDLES PVC FASTTAP SADDLES for IPS Mains THE ULTIMATE CONNECTION OUTLET 3/4 IPS FEMALE SLIP OR 1 IPS MALE SLIP SOLVENT WELD 1 IPS FEMALE SLIP SOLVENT WELD 3/4 MPT 1 MPT 3/4 FPT MAIN 13/16
Continental Industries STEEL SERVICE TEES or FAX Visit
Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
(1) Union Filter for positive and negative pressure (2) Filter size. (3) Tube dia. (4) Holder option : without Holder : with Holder
With the same convenience as the conventional vacuum filters (the VFU series), the filter can be used in the positive pressure as well. Best suitable for the applications in positive pressure where filtration
Direct Operated Precision Regulator Modular Style. Standard Specifications
1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com
(1) Name of tube (2) Tube dia. (O.D./I.D.) (3) Tube length. (4) Tube color. Model UD0425. UD1290 O.D. I.D. (mm) UD1075 UD0860 UD
The polyurethane tube, featuring excellent flexiblity, helps compact piping requiring small bending radius. The useful cut marks at 500mm interval are printed on the tube. Model UD0425 UD0640 UD0860 UD1075
Push-In Fitting Type Silencer
http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type 540 Reduce Exhaust Noise from Exhaust Port. Excellent Silencing Effect. Selection from 3 types. Push-In Fitting
1805 Series Relief Valves
Instruction Manual Form 1211 1805 Series October 2011 1805 Series Relief Valves! WARNING Failure to follow these instructions or to properly install and maintain this equipment could result in an explosion
Series CGZT three-jaw grippers with T-guide
Series CGZT three-jaw grippers with T-guide New Single and double acting, magnetic, self-centering Sizes: 40, 50, 64, 80, 100, 125, 160 mm The new Series CGZT pneumatic grippers, thanks to the use of a
Continental Industries TRANSITION FITTINGS or FAX Visit
Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
Single and double acting, magnetic, self-centering Bores: ø 16, 20, 25, 32, 40 mm
> Series CGPT self-centering parallel grippers with T-guide Series CGPT self-centering parallel grippers with T-guide Single and double acting, magnetic, self-centering Bores: ø 6, 20, 25, 32, 40 mm New