SMB Series. SMB Series. Specifications. Interface Dimensions. Available in 50 Ohm and 75 Ohm versions. Snap-on interface reduces installation time.
|
|
|
- Aubrey Manning
- 6 years ago
- Views:
Transcription
1 Available in 50 Ohm and 75 Ohm versions. Snap-on interface reduces installation time. Self-cleaning outer spring withstands moderate vibration. Small & lightweight. Frequency Range: Up to 4 GHz Specifications MATERIAL Body: Brass Crimp Sleeves: Annealed Copper Alloy Contacts: Brass (Male) Copper Alloy (Female) Insulators: Teflon Lockwashers: Phosphor Bronze FINISHES Body: Center Contacts: MECHANICAL Life: Engagement Force: Disengagement Force: Gold or Nickel Gold 500 Cycles 14 Pounds Maximum 2 Pounds Minimum 14 Pounds Maximum ELECTRICAL Impedance: 50 Ohms Frequency Range: DC to 4 GHz VSWR: RG196 or similar Straight: F Right Angle: F RG 316 or similar Straight: F Right Angle: F Insertion Loss:.25 db Max at 4 GHz ENVIRONMENTAL Temperature Range: -65 C to +165 C Vibration: MIL-STD-202, Method 204, Condition B Shock: MIL-STD-202, Method 213, Condition B Corrosion: MIL-STD-202, Method 101, Condition B Temperature Cycling: MIL-STD-202, Method 102, Condition C Interface Dimensions 61
2 Cable Plugs, Crimp Type - Flexible Cable Figure 1 Figure 2 Figure 3 Cable Jacks, Crimp Type - Flexible Cable Figure 4 Figure H Plug, Crimp/Clamp F Gold CAP8-02 KTH N Plug, Crimp/Clamp F Nickel CAP8-02 KTH H Plug, Crimp/Clamp F Gold A CAP8-02 KTH N Plug, Crimp/Clamp F Nickel A CAP8-02 KTH H Plug, Crimp/Clamp F Gold B CAP8-02 KTH N Plug, Crimp F Nickel B CAP8-02 KTH H Plug, Crimp F Gold A CAP9-08 KTH N Plug, Crimp F Nickel A CAP9-08 KTH H Plug, Crimp F Gold B CAP9-08 KTH N Plug, Crimp F Nickel B CAP9-08 KTH H Plug, Angle, Crimp F Gold CAP9-06 KTH N Plug, Angle, Crimp F Nickel CAP9-06 KTH H Plug, Angle, Crimp F Gold A CAP9-06 KTH N Plug, Angle, Crimp F Nickel A CAP9-06 KTH H Plug, Angle, Crimp F Gold B CAP9-06 KTH N Plug, Angle, Crimp F Nickel B CAP9-06 KTH H Jack, Bulkhd, Crimp/Clamp M Gold CAP8-02 KTH-2015 P N Jack, Bulkhd M Nickel CAP8-02 KTH-2015 P H Jack, Bulkhd, Crimp/Clamp M Gold A CAP8-02 KTH-2008 P N Jack, Bulkhd, Crimp/Clamp M Nickel A CAP8-02 KTH-2008 P H Jack, Bulkhd, Crimp/Clamp M Gold B CAP8-02 KTH-2011 P N Jack, Bulkhd, Crimp/Clamp M Nickel B CAP8-02 KTH-2011 P H Jack, Bulkhd, Crimp M Gold CAP9-08 KTH-2015 P N Jack, Bulkhd, Crimp M Nickel CAP9-08 KTH-2015 P H Jack, Bulkhd, Crimp M Gold A CAP9-08 KTH-2008 P N Jack, Bulkhd, Crimp M Nickel A CAP9-08 KTH-2008 P H Jack, Bulkhd, Crimp M Gold B CAP9-08 KTH-2011 P N Jack, Bulkhd, Crimp M Nickel B CAP9-08 KTH-2011 P 5 62 Winchester Electronics Corporation RF Connectors
3 Cable Plugs, Solder Type - Semi-Rigid Cable Figure 6 Figure 7 Figure N Plug, Solder/Clamp F Nickel CAP H Plug, Solder/Clamp F Gold CAP N Plug, Solder/Clamp F Nickel CAP H Plug, Solder/Clamp F Gold CAP H Plug, Angle, Solder/Clamp F Gold CAP N Plug, Angle, Solder/Clamp F Nickel CAP H Plug, Angle, Solder/Clamp F Gold CAP N Plug, Angle, Solder/Clamp F Nickel CAP H Jack, Bulkhd, Solder/Clamp M Gold CAP6-01 P H Jack, Bulkhd, Solder/Clamp M Gold B CAP6-01 P 8 63
4 PCB Jack Figure 9 Figure 10 PCB Jack PCB Plug Figure 11 Figure 13 Figure 12 Figure 14 Surface mount Plug Surface mount Jack Figure 15 Figure Winchester Electronics Corporation RF Connectors
5 Cable Jacks, Solder Type Figure 17 Figure 18 Figure H Jack, Angle, PCB M Gold U N Jack, Angle, PCB M Nickel U H Jack, Angle, Bulkhd, PCB M Gold U & P N Jack, Angle, Bulkhd, PCB M Nickel U & P H Jack, PCB M Gold U 11_ N Jack, PCB M Nickel U 11_ H Jack, PCB M Gold O 11_ H Jack, PCB M Gold O 11_ N Jack, PCB M Nickel O 11_ N Jack, PCB M Nickel O 11_ H Jack, Angle, PCB, Surface Mt M Gold H Plug, Angle, PCB F Gold U N Plug, Angle, PCB F Nickel U H Plug, PCB F Gold U H Plug, PCB F Gold U N Plug, PCB F Nickel U N Plug, PCB F Nickel U H Plug, PCB, Surface Mt F Gold H Jack, PCB, Surface Mt M Gold H Receptacle, Bulkhd M Gold P H Receptacle, Bulkhd M Gold P N Receptacle, Bulkhd M Nickel P N Receptacle, Bulkhd M Nickel P H Receptacle, Bulkhd M Gold P N Receptacle, Bulkhd M Nickel P H Receptacle, Panel M Gold V N Receptacle, Panel M Nickel V 19 65
Outer contact 1.0 milliohm max.
MCX.4 11/27/01 5:17 PM Page 17 Connex MCX Series connectors are ideal for applications and designs where weight and space savings are critical. This series has a 50 ohm impedance structure which operates
Amphenol RF. Type N. Type N Connectors. Type N. Description. Features/Benefits. Applications
Amphenol RF 144 Connectors Description Named after Paul Neill of Bell Labs after being developed in the 1940 s, the offered the first true microwave performance. The connector was developed to satisfy
*NOTE: 75 OHM SERIES CONNECTORS ARE NOT INTERMATEABLE WITH THE 50 OHM SERIES.
The Connex N connectors with screw coupling are fully interchangeable with N connectors made to the MIL-C-39012 specification. Designed for use in all systems where very good R.F. and mechanical performance
MMCX Coaxial Connectors
The Amphenol MMCX series is the next generation of microminiature connectors. Offering a reliable broadband performance from DC to 6 GHz. These 50 ohm connectors incorporate the industryapproved MMCX interface,
UHF/Mini-UHF Coaxial Connectors
UHF/MiniUHF Coaxial Connectors The Amphenol UHF/MINIUHF connectors are popular and economical, used when impedance mating is not required. General purpose units are designed to operate satisfactorily op
SMB/SMC Coaxial Connectors
The Amphenol SMB/SMC subminiature coaxial connectors with 50 ohm impedance are for applications to 4 GHz (SMB) or 10 GHz (SMC). Generally less expensive then SMA, these connectors are used primarily in
BNC 50 Ohm. BNC - 50 Ohm. Aviel Electronics 3060 East Post Road, Suite 100, Las Vegas NV 89120
Find Reverse Polarity on page 51-56 male BNC 50 Ohm female specifications ELECTRICAL SPECIFICATIONS Impedance: 50 Ω Working voltage rating: 500 VRMS @ sea level Frequency range: 0-4 GHz MECHANICAL SPECIFICATIONS
PRODUCT SPECIFICATION
MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold plated connector series, single and dual row versions in wire to wire and wire to printed circuit
1mm Pitch SMT Board-to-Board Connectors(Standard Interface Connector Compliant with VESA FPDI-1)
1mm Pitch SMT Board-to-Board Connectors(Standard Interface Connector Compliant with VESA FPDI-1) DF Series Features 1. Compliant with the VESA FPDI-1 Standard Interface Connector The and contact connectors
Primary Terminals & Connectors
Primary & Pure electrolytic copper with electro-tin plating for corrosion resistance Deep internal serrations promote firm wire grip for maximum strength Insulation (where applicable) is color coded to
Technical Specification. Outline Drawing (Size: mm) Mounting Flange. Chengdu AINFO Inc. Page 1. Frequency Range(GHz) 1-18
Technical Specification Outline Drawing (Size: mm) Mounting Flange Chengdu AINFO Inc. Page 1 Frequency Range(GHz) 1-18 Gain(dB) 11 Typ. Polarization Linear VSWR 1.5:1 Typ. Connector N-F/SMA-F Power Handling(W)
Series 64 Online Data Sheet
MAC Panel Company Revised: 02/21/2013 Series 64 Online Data Sheet SERIES 64 The Series 64 Interface System allows configuration interchangeability with 25 or 50 slots. The Series 64 is a Hinge-Down design
38999 Space grade ESA/SCC Section. MIL-DTL Space Grade Circular Connectors
38999 Space grade ESA/SCC 3401 Section II MI-DT 38999 Space Grade Circular Connectors 59 38999 Space Grade ESA/SCC 3401 Contents 38999 Space Grade ESA/SCC 3401 SCC Specification.......................................................61
Glenair Well-Master TM 260 Micro-D Withstands Extreme High Temperature
Section : Well-Master Micro- + P eader lenair Well-Master TM Micro- Withstands Extreme igh Temperature Standard Micro- connectors are rated for +125. lenair's MWM Micro- can withstand +150 continuous operating
Saluki Coaxial RF Adaptor Product List
Saluki Coaxial RF Adaptor Product List Saluki Technology Inc. Preface Thank you for choosing the coaxial adaptors produced by Saluki Technology Inc. We devote ourselves to meeting your demands, providing
EPIC Rectangular Connector Inserts. HBE Series. Technical Data Number of Contacts:
HBE Series HBE series inserts provide reliable termination and performance in the vast majority of medium power and control applications. Methods of termination include screw, crimp, and spring cage clamp.
1mm Pitch SMT Board to Board Connector(Standard Interface Connector Compliant with VESA FPDI-1)
1mm Pitch SMT Board to Board Connector(Standard Interface Connector Compliant with VESA FPDI-1) DF Series Features 1. Compliant with the VESA FPDI-1 Standard Interface Connector The and contact connectors
May08 Rev B
Qualification Test Report 0.64 mm Generation Y Terminal 501-657 20May08 Rev B 1. INTRODUCTION 1.1. Purpose Testing was performed on the Tyco Electronics 0.64 mm Generation Y Terminal to determine its conformance
COMPONENT SPECIFICATION M80-7XX SERIES CONNECTORS - THREE ROW
COMPONENT SPECIFICATION M80-7XX SERIES CONNECTORS - THREE ROW JUN 200 CONTENTS: SECTION TITLE PAGE Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings
ST Connectors & Adapters
Features & Benefits High performance singlemode and multimode pre-polished ferrules ST* compatible bayonet coupling Field installable Standard crimp and crimpless screw type KEVLAR retention Variety of
Pegasus Series Amphenol Pcd
Pegasus Series Amphenol Pcd Amphenol Pcd is one of the world s leading suppliers of interconnect products for Military, Commercial Aerospace and Industrial applications. Located north of Boston in Beverly,
Series 120 Online Data Sheet
MAC Panel Company Revised: 02/25/2013 Series 120 Online Data Sheet SERIES 120 Ideal for your VXI applications, with 1.2 centers, thus providing a 1 to 1 match. The Pull-Thru system allows the user to pull
Plok. Rapid Mating Multi-Pin Industrial Connector. Amphenol Industrial Sine Systems * Pyle Connectors Corporation
- Plok Rapid Mating Multi-Pin Industrial onnector mphenol Industrial Sine Systems * Pyle onnectors orporation eatures and enefits Rapid mate spring loaded, push to mate, pull to unmate coupling system
PRODUCT SPECIFICATION. SFP+ Cage and Cage Assembly 1 of 8 A
SFP+ Cage and Cage Assembly 1 of 8 A 1.0 Objective This specification defines the performance, test, quality and reliability requirements of the _Small Form-factor Pluggage (SFP+) product. 2.0 Scope This
NON-CATALOG. Features excellent image rejection, 27 db typ. low conversion loss, 7.0 db typ. aqueous washable J-leads for strain relief
NON-CATAG Surface Mount Image Reject Mixer Level 13 ( Power +13dBm) 2490 to 2550 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C RF Power 200mW IF Current 40mA
D-Sub Vertical Surface Mount Connectors RoHS compliant Economical Interface Solution for SMT Applications
D-Sub Vertical Surface Mount Connectors RoHS compliant Economical Interface Solution for SMT Applications General In the manufacture of assemblies, the trend toward using SMT components is unbroken. Whereas
CPTCONNECTOR. Board-to-wire. Features. Specifications
CPTCONNECTOR Board-to-wire HIT AIT AIT- HCM SHC HCH MIO CPT BMD RAD CIT GIT0P GITP HIC SNA NAC- SQS SQM SQH SQS Developed in pursuit of miniaturization and low profile as PC board connector for automobile.
HOW TO USE THIS MANUAL
HOW TO USE THIS MAUAL This manual is organized first by HAVERHILL Cable groups and then by the types of RFI connectors available for each group. The connector lists are divided into subgroups by interface
FEATURES SPECIFICATIONS 3D-LINE SPLITTERS AND TAPS INDOOR RF PASSIVES
TÜRKSAT KODU : TKS-RFP-09 PRODUCT FAMILY INDOOR RF PASSIVES DESCRIPTION 3D-LINE SPLITTERS AND TAPS FEATURES >> DOCSIS 3.1 compliant with frequency range up to 1218 MHz >> Electromagnetic compatibility
GENERAL APPLICATION NOTES
GENERAL APPLICATION NOTES There are common considerations when using our connectors. Additional considerations may apply based on the particular connector being used, the application, and conditions in
![[Instruments for vacuum measurement, checking and adjustment] 3](/thumbs/94/121874202.jpg "[Instruments for vacuum measurement, checking and adjustment] 3")
Features hermetic shielded case very small phase variation
Plug-In Limiter 50Ω Broadband, 0.1 to 150 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C RF Input Power 100mW Control Current 10mA Permanent damage may occur
Pegasus Series Amphenol Pcd
is one of the world s leading suppliers of interconnect products for Military, Commercial Aerospace and Industrial applications. Located north of Boston in Beverly, Massachusetts, the company designs and
M2 Antenna Systems, Inc. Model No: VLP16
M2 Antenna Systems, Inc. Model No: 100-600VLP16 SPECIFICATIONS: Model... 100-600VLP16 Frequency Range... 100-600 MHz Cont. *Gain... 9.64 dbi Front to back... 12 db Typical Beamwidth... E=64 / H=70 Feed
Luminus Series Amphenol Pcd
Luminus Series Amphenol Pcd Amphenol Pcd is one of the world s leading suppliers of interconnect products for Military, Commercial Aerospace and Industrial applications. Located north of Boston in Beverly,
Inductive Linear Displacement Transducers Model IW 260 Measuring strokes: 80 mm, 170 mm, 240 mm, 360 mm
Inductive Linear Displacement Transducers Model IW 260 Measuring strokes 80, 170, 240, 360 Document no. IW 100 HE Date 1.07.201 Contactless, robust sensor system Infinite resolution, no hysteresis Calibrated
RECTANGULAR CONNECTORS
RECTANULAR CONNECTORS CN-360 SERIES EATURES Many applications Various connectors are available for connection by means of soldering, wire wrapping, crimping, PC board mounting, and insulation displacement
ibridge and ibridge Ultra
2.00 mm Board to Cable Connectors ED. 06 10.2016 Catalog EA IB001 erni.com erni.cn TABLE OF CONTENTS OVERVIEW General 03 Technical Details 04 Features 05 Electrical and Mechanical Characteristics 10 Ordering
MX150 System Sealed Product Line
MX150 System Sealed Product Line 1 of 74 Table of Contents Section 1: Product Introduction Section 2: Product Summary Section 3: Connector Assembly Section 4: Connector Mating Section 5: Service Instructions
Datamate Specification. Pin Numbering. Mating Profiles. Materials. Mechanical. 3 Row 6.
Datamate Specification Materials Mechanical Mouldings: Glass-filled thermoplastic UL94V-0 Female contacts: rass shell, with eryllium opper inner contact Male contacts: Phosphor bronze Finish: See individual
December 2018 "F" COMPRESSION CONNECTORS RG6 "F" TYPE RG11 CONNECTOR COMPRESSION F PLUG TO F SOCKET RIGHT ANGLE "F" MALE TO "F" MALE BARREL ADAPTOR
Jonsa TV RF Accessories "F" TYPE RG11 CONNECTOR COMPRESSION FOXTEL APPROVAL F30709 The APFTRSF11L Foxtel F Type Connector is a compression F-type connectors for RG11 coaxial cable Foxtel Approval: F30709
INDEX OF REVISIONS DESCRIPTION AND/OR AFFECTED SHEETS
E&P-CORP/ ENGP/ISP TECHNICAL SPECIFICATION I-ET-3500.00-1500-896-PAZ-002 Rev. 0 E&P Pag. 1 / 13 UN-BC e UN-RIO SUBSEA CONTROL UMBILICAL (Manifold Standard) INDEX OF REVISIONS REV DESCRIPTION AND/OR AFFECTED
24 AWG Nano M8 Single Ended and Double Ended Assemblies
24 AWG M8 Single Ended and Double Ended Abrasion Chemicals Flexing UL Listed CSA IP68 Rated RoHS Compliant 300 V Operating Temperature Range -30 C to 90 C Current Rating: 4 Amps Cord sets made with Trex-Onics
New, lighter, more flexible... MIG/MAG Fume Extraction Torch RAB Plus 501/501 D liquid-cooled. BINZEL. The right welding torch for every job!
MIG/MAG Fume Extraction Torch RAB Plus 501/501 D liquid-cooled New, lighter, more flexible... C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M BINZEL. The right welding torch for every job! BINZEL liquid-cooled
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
RF-LAMDA LEADER OF RF ROADAND SOLTIONS Electrical Specifications,T A =25 Power Rating Coaxial W º 2-Way Power Divider 2-8 Features High power handling up to W Wide band operation High isolation within
WBØTGE Mighty Woof 2m/440 Dual Band Fan Dipole (DBFD)
WBØTGE Mighty Woof 2m/440 Dual Band Fan Dipole (DBFD) I call this the Mighty Woof antenna. It reminds me of two Wouff Hong (created by Hiram Percy Maxim) joined together at the base creating an awesome
IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC PURPOSE
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC 157-20067 1 PURPOSE 1.1 The purpose of this standard is to establish an acceptable standard
Wireless Belt Pack BP Conductor Jack with Radio Transmit & Volume Control
Wireless Belt Pack BP3-10 3-Conductor Jack with Radio Transmit & Volume Control Operation Manual 7340 SW Durham Road Portland, OR 97224 USA Phone: 503-684-6647 1-800-527-0555 Fax: 503-620-2943 email: sales@firecom.com
PERFORMANCE SPECIFICATION SHEET MICROPHONE ASSEMBLY, M-169A/AIC
PERFORMANCE SPECIFICATION SHEET INCH-POUND MIL-PRF-26542/12C 12 September 2012 SUPERSEDING MIL-PRF-26542/12B 11 February 1999 MICROPHONE ASSEMBLY, M-169A/AIC This specification sheet is approved for use
Preliminary Datasheet
Device Features Low Noise Figure: NF = 0.95 @ 1900MHz High Linearity: OIP3 = 36 dbm @ 1900 MHz Output P1 db = 22 dbm @ 1900 MHz Gain = 17 db @ 1900 MHz Internally matched to 50 ohms Vdd: 5.0V Lead-free/RoHS-compliant
SVEA II GSM Connector User Manual
www.possio.com SVEA II GSM Connector User Manual 1. Introduction Before using SVEA II please read this manual carefully and keep it for future reference. SVEA II GSM Connector is a device for realization
P9000 DESCRIPTION. For parts requiring RoHS compliance, please contact factory. P February /6
P9000 High accuracy through digital compensation High thermal stability Rugged stainless steel construction Ideal for test stands High burst pressure limit DESCRIPTION The P9000 Series is a range of advanced,
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
LEADER OF RF BROADBAND SOLTIONS RLNAGGA ltra Wide Band Low Noise Amplifier.~ Electrical Specifications, TA = ⁰C, Vcc = V Features Gain: Typical Noise Figure:. Typical P Output Power: m Typical Ohm Matched
Introduction. P r otective Seals Panel seal for One Hole Mounting (OHM) O-Ring seals for panel mounting Switch boots
SECTION F Introduction ACCESSORIES Switch Guar d s Prevent accidental operation of switches Switch operation limited to selected functions Adaptable to one, two and four pole config u r a t i o n s One
INDEX OF REVISIONS DESCRIPTION AND/OR AFFECTED SHEETS
E&P-ENGP/IPMI/ES TECHNICAL SPECIFICATION I-ET-3500.00-1500-896-PAZ-010 Rev. 0 E&P Pag. 1 / 13 UN-BC, UN-ES, UN-RIO SUBSEA ELECTR. POWER & CONTROL UMBILICAL This Technical Specification applies for umbilicals
Relief Valves. Relief Valves. International, Inc. Company ACIRCOR. RS Differential NB 9.5mm. RVA In-line Differential NB 6 to 19mm
s s RS Differential NB 9.5mm RVA In-line Differential NB 6 to 19mm RV Direct Acting NB up to 9mm LPR Low Pressure Differential NB 8mm We design, machine, build and test all our products on one site in
EPIC Rectangular Connectors HBE Series
HBE Series The HBE series inserts are suitable for applications with high voltages and current. The inserts can be terminated in a variety of ways: screw, crimp, or spring cage clamp. TECHNICAL DATA Number
ATH 500 M. Pumping speed ATH 500 M. 3.1 Vacuum generation / Turbopumps / Magnetically levitated / ATH 500 M. Page 398 / Part 3.1
ATH 500 M Compact integrated drive Installation in any orientation Water or air cooled CE marked and ROHS compliant Heated version (MT) available for corrosive applicaitons. Pumping speed N 2 He H 2 Ar
Wireless Belt Pack BP Conductor with Radio Transmit
Wireless Belt Pack BP5-10 5-Conductor with Radio Transmit Operation Manual 7340 SW Durham Road Portland, OR 97224 USA Phone: 503-684-6647 1-800-527-0555 Fax: 503-620-2943 email: sales@firecom.com www.firecom.com
Thin-Film Technology. Accu-F / Accu-P Thin-Film RF/Microwave Capacitors.
Thin-Film Technology Accu-F / Accu-P Thin-Film RF/Microwave Capacitors 5 Accu-F / Accu-P Thin-Film Technology THE IDEAL CAPACITOR The non-ideal characteristics of a real capacitor can be ignored at low
Teledyne Oil & Gas North Williamson Blvd. Daytona Beach, FL USA (phone) (fax)
PER CO # 33537 Approved By: M. Bartell Originator: Checked By: S. Jackson B. Cornelius 1 of 8 ODN-084-23 23 TITLE: Installation and Operation Manual for Dry- Teledyne Oil & Gas 1026 North Williamson Blvd.
INDUSTRIAL CUTTING EQUIPMENT
INDUSTRIAL CUTTING EQUIPMENT Catalogue : NIWC 1046 We reserve the right to introduce changes to our product range and /or designs without prior notice Cold Cutting Equipment Section No. Description Colour
CAM & GROOVE COUPLINGS (for Liquid, Bulk and Chemical Transfer)
CAM & GROOVE COUPLINGS (for Liquid, Bulk and Chemical Transfer) CAMPBELL COBRA VS. STANDARD COBRA COBRA is the trade name for our entire line of cam & groove couplings. Campbell COBRA is the upgraded versions
Product Specification Spring Finger
Product Specification 108-115008-3 Spring Finger Restricted to Sony Ericsson Mobile Communications 1. SCOPE 1.1. Content This specification covers the requirements for product performance test methods
Zelio Relays RSL Slim Interface Plug-In Relays
Zelio Relays RSL Slim Interface Plug-In Relays Catalog 8501CT0901 2009 Class 8501 CONTENTS Description............................................. Page Introduction.................................................3
CORE MICRO PRODUCTS. FFC/FPC, Board-to-Board, Microminiature Wire-to-Board and Memory Card Connectors
CORE MICRO PRODUCTS FFC/FPC, Board-to-Board, Microminiature Wire-to-Board and Memory Card Connectors Core Micro Product (CMP) Families 1.0A 1.0A 2.0A Pico-Clasp 1.00mm Duo-Clasp 1.25mm MicroClasp 2.00mm
Datasheet ANSI Standard Duplex Thermocouple Connector Sockets Types K, J, T, E, N, R/S & B (ANSI Colour Code)
Datasheet ANSI Standard Duplex Thermocouple Connector Sockets Types K, J, T, E, N, R/S & B (ANSI Colour Code) ENGLISH Duplex (2-channel) standard connector that accepts solid, round plug pins Bodies supplied
RJ11FC3-I. Base Data. Category 3-6P6C RJ11 USOC keystone jack - Ivory - 1/bag. Article Number: Part No. RJ11FC3-I. Type RJ11FC3.
insertions Contact set constructed of phosphor bronze Category 3-6P6C RJ11 USOC keystone jack - Ivory - 1/bag Article Number: 852-25009 Part Number: Type: RJ11FC3 Base Data Part No. Type Color Features
Datasheet IEC & ANSI Miniature or Standard Quick Wire Thermocouple Connector Plug & Socket Type K in IEC or ANSI Colour code
Datasheet IEC & ANSI Miniature or Standard Quick Wire Thermocouple Connector Plug & Socket Type K in IEC or ANSI Colour code ENGLISH These quick connect versions allow rapid termination Miniature connector
PCB accessories. PCB handle C. PCB retainer C. Order Information. Note. Order Information
PCB accessories PCB handle C PCB accessoriesmain CataloguePart number in bold face type: ready for despatch within 2 working dayspart number in normal type: ready for despatch within 0 working days For
SPECIFICATION. Product Name : MA450 Storm 5in1 Permanent Mount Antenna LTE MIMO*2 + WIFI MIMO*2 + GNSS
SPECIFICATION Part No. : MA45.K.LBICG.3 Product Name : MA45 Storm 5in1 Permanent Mount Antenna LTE MIMO*2 + WIFI MIMO*2 + GNSS Features : Aerodynamic, Super Low-profile Vandal Resistant Housing 2* LTE
ENGLISH Datasheet IEC Miniature Thermocouple Connector Socket with Stainless Steel mounting bracket Types K, J, T, E, N, B & Copper (IEC Colour Code)
ENGLISH Datasheet IEC Miniature Thermocouple Connector Socket with Stainless Steel mounting bracket Types K, J, T, E, N, B & Copper (IEC Colour Code) Miniature size in-line Thermocouple Socket with stainless
RECTANGULAR CONNECTORS
RETNGULR ONNETORS FN360 Series FN-365P FN-365J FN-364P FN-364P FN-364J FN-364J FN-365P FN-365J FN-364P FN-364J FN-362J FN-363J FN-365P FN-367J FN-365P FN-364P FN-361P With type cover FN-365J FN-364P With
jáåêçtbqj`lkpmifqseries
UNDERWATER ELECTRICAL WET-MATE CONNECTORS CONTENTS PAGE SECTION PAGE tbqj`lkpmifqseries Introduction... MWC 19 Availability... MWC 19 Applications... MWC 19 Testing... MWC 19 Special Assemblies... MWC
750 Cable Cutter INSTRUCTION MANUAL
INSTRUCTION MANUAL 750 Cable Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product at www.greenlee.com
CONTENTS PAGE. Introduction... CSMS 2 Availability... CSMS 2 Applications... CSMS 2
CONTENTS PAGE SECTION PAGE `pjjpseries Introduction... CSMS 2 Availability... CSMS 2 Applications... CSMS 2 Testing... CSMS 2 Special Assemblies... CSMS 2 Part Number System... CSMS 2 General Information...
Installation Instructions for NP100 Series Nitrogen Control Panels
Installation Instructions for NP100 Series Nitrogen Control Panels Installation of the Nitrogen Control Panel involves installing the rough-in box and making the necessary piping connections in accordance
4/2 way Pneumatic Solenoid Valve
4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11
Pressure Gauges. Version 2018 Revised 01/2018
Pressure Gauges Version 2018 Revised 01/2018 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN 55447
F-5 AVIONICS. PARTS LIST AND CAPABLITIES Page 1 AMPLIFIER BOXES
Page 1 F-5 Avionics Capabilities Tech Electronic Systems INC offers a wide variety of F-5 Electronic assemblies and & subassemblies; we are also more than capable and experienced in the reverse engineering
WaterSource Heat Pump Hose Kit Performance Specification-Summary
WaterSource Heat Pump Hose Kit Performance Specification-Summary AUTOMATIC & MANUAL BALANCING HOSE KITS Contractor shall provide and install Hays Hose Kits. Each kit, shall include a Hays 2500 Series Mesurflo
(TRCM) Wire Wound RF SMD Inductor
Version: February 17, 2017 (TRCM) Wire Wound RF SMD Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New
SCHRADER TANK VALVES FOR USE IN AIR BLADDER APPLICATIONS, BICYCLE SUSPENSION SYSTEMS, TELECOMMUNICATIONS, WATER STORAGE SYSTEMS, ETC.
SCHRADER TANK VALVES FOR USE IN AIR BLADDER APPLICATIONS, BICYCLE SUSPENSION SYSTEMS, TELECOMMUNICATIONS, WATER STORAGE SYSTEMS, ETC. Demand an authentic Schrader valve built by the company that set the
SMARTen STP Patch Cords Features
Features Patch Cords are used in the work area and cross-connect generic cabling applications Comprise a length of eight-wire flexible patch cable, terminated with two eight-position RJ-45 plugs at each
P9000 Series Pressure Transducer
High accuracy through digital compensation High thermal stability Rugged stainless steel construction Ideal for test stands High burst pressure limit DESRIPTION The P9000 Series is a range of advanced,
Prewired position switches FA series
2 Prewired position switches FA series Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 51 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable lever 41 45
Pressure switches for air and water CS
Data sheet Pressure switches for air and water CS CS pressure switches have a built-in pressure operated, three-pole switch. The contact position of which depends on the pressure in the connector and the
Product Technical Bulletin #48
AN INTEGRATED SOLUTIONS PROVIDER Product Technical Bulletin #48 Current-Carrying Capacity of R-Series Connectors AirBorn Proprietary Page 1 AN INTEGRATED SOLUTIONS PROVIDER R-Series Current-Carrying Capacity
P900. P900, Datenblatt Seite 1 DESCRIPTION
, Datenblatt Seite 1 Field proven rugged construction High overpressure capability High reliability for demanding environments Application specific customization Excellent media compatibility Shock and
PSR-4000 HFX Series (UL Name: PSR-4000DE / CA-40HF)
PSR-4000 HFX Series (UL Name: PSR-4000DE / CA-40HF) LIQUID PHOTOIMAGEABLE SOLDER MASK Application by Screen Printing Dark Green Satin Available in DI version Halogen-Free RoHS Compliant Compatible with
Flexible & Intelligent
Flexible & Intelligent The flexible copper tube cuprotherm CTX tubes are copper tubes with a firmly adherent coating. Due to their structure they can be easily processed and are characterized by a flexibility
Shut-off ball valve Type GBC
Data sheet Shut-off ball valve GBC shut-off ball valves, type GBC, are manually operated shut-off valves suitable for bi-directional flow. The GBC valves are used in liquid, suction and hotgas lines in
Expanded Beam Optical Termini
8D Series & ARINC 600 Series ELIOBEAM Fiber Optic Contact Expanded Beam Optical Termini The optical connection requirement for environmentally exposed mating cycles. Robust to contamination Large beam
Typical Performance 1. LTE 20M ACLR dbm. 2 OIP3 _ measured on two tones with a output power 5dBm/ tone, F2 F1 = 1 MHz.
Device Features Gain = 15.6 db @ 2140MHz OIP3 = 35.0 dbm @ 2140 MHz Output P1 db = 23.2 dbm @ 2140 MHz N.F = 2.9dB @ 2140 MHz Internally matched to 50 ohms Lead-free/RoHS-compliant SOT-89 SMT package Product
AIT- CONNECTOR. Board-to-wire/Wire-to-wire terminal. Features. Specifications
AIT- CONNECTOR.4 terminal Board-to-wire/Wire-to-wire Features Ultra Low Profile Connector Over 3% Height uction as compared to the Standard USCAR Footprints. Variations There are multiple varieties of
Operating Instructions
ELECTRIC AND GAS FRYER AUTOMATIC BASKET LIFT SYSTEM Operating Instructions 302 Spencer Lane P.O. Box 5369 San Antonio, Texas 78201 (800) 525-8130 (210) 731-5000 Fax: (210) 731-5099 www.ultrafryer.com PREFACE
AMS 2710 PCB pressure sensor module with V output
FEATURES Universal pressure sensor module with 0.. 10 V voltage output Fully calibrated and temperature compensated sensor module Variants for (bidirectional) differential, gage, absolute and barometric
3.5m TEAM Lightweight Range Extender ( MHz) User Guide
3.5m TEAM Lightweight Range Extender (136-470MHz) User Guide Provisional and subject to change Highly compact Lightweight and portable Weather resistant Quick deployment and recovery Plug and play range
CONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint
Super-rapid fittings for plastic tubes Series 6000 Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3, M5, M6, M7), BSP (G1/8, G1/, G3/8, G1/2, G3/), BSPT (R1/8,
SEALED CONNECTORS FOR THE LIMIT SWITCHES
SEALED CONNECTORS FOR THE LIMIT SWITCHES LIST OF MODELS / Sealed connectors are used at the cable-connecting section of limit switches. Type and appearance Materials Features Target market Applications