ASM. Asynchronous Spindle Motors. SEM Limited Faraday Way Orpington, Kent BR5 3QT United Kingdom
|
|
|
- Arron Sharp
- 6 years ago
- Views:
Transcription
1 NE ASM Asynchronous Spindle Motors SEM Limited Faraday Way Orpington, Kent BR 3QT United Kingdom Tel: +44 () Fax: +44 () Web: Version 4 August 2
2 Asynchronous Motors ASM Overview General technical information Speed measurement An integrated rotary encoder from HEIDENHAIN measures the shaft speed. Motors with solid shaft are fitted with an ERN 81 encoder with 1 24 lines. Motors with a hollow shaft and the ASM 2M / rpm are fitted with an ERM 28 encoder with lines. Specifications The specifications and the performance curves apply when motors are mounted without thermal insulation. All ratings are based on a maximum temperature rise of 1 K on the winding with a maximum ambient temperature of 4 C. If the motor is mounted so that it is thermally insulated, it is necessary to reduce the motor torque in order to avoid thermal overloading of the motor. Shaft bearing SEM asynchronous motors are fitted with maintenance-free bearings. The shaft bearings used on motors with solid shaft are available as either standard or high specification spindle bearings. When using spindle bearings the motor can withstand greater radial forces allowing for higher spindle speeds. Motors with spindle bearings are slightly longer. Hollow-shaft motors are always fitted with high specification spindle bearings. Mechanical life The service life of the bearings depends on the shaft load and the average shaft speed (contact SEM for further details). The nominal bearing service life is 1, hours this depends on the specific motor, the maximum shaft load and the average motor shaft speed. Shaft end ASM asynchronous motors from SEM have a shaft extension as per DIN The solid shaft motors have a centering hole as per DIN 332-DR. The standard versions of the asynchronous motor have a plain shaft (without keyway and feather key). Upon request the motors are available with keyway and feather key as per DIN Feather key: ASM 2: A x 8 x 7 ASM 2: A2 x 8 x 9 ASM 32: A x 1 x 9 Precision balancing Balancing of ASM asynchronous motors from SEM can be done at any time. Hollow-shaft motors The ASM 2 UH and ASM 2 xh motors with hollow shaft are suited for direct mounting to mechanical spindles. The hollow shaft permits you to convey coolant to tools with inner cooling. The coolant is introduced at the rear of the motor through a rotating manifold (e.g. from Deublin, order no.: ). The shaft end is designed for this. Mechanical data Design IM B3 (mounting by flange/base) according to EN 34-7 Mounting of the motor We recommend using the following screws according to DIN EN ISO 417 to mount the motor: Fastening: Flange Base ASM 2 M12 x 3 M1 x 3 ASM 2 M1 x 4 M12 x 3 ASM 32 M x M14 x 4 Flange: Dimensions as per DIN and IEC 72 Protection as per EN 29 Motor: IP 4 / Shaft end: IP 43 Vibration severity Grade SR (external precision balancing possible) (IEC 34-14) Thermal specifications Separate cooling via integrated fan Temperature monitoring with KTY 84- thermistor in the stator winding Thermal class F 1
3 Asynchronous motors with solid shaft Rated power output Rated speed Max. speed Rated torque Rated current Standard bearing Spindle bearing ASM 2 M. kw 1 min 1 9 min 1 12 min 1 min 1 3. Nm. A ASM 2 L 7. kw 1 min 1 9 min 1 12 min Nm 2.1 A ASM 2 U 1. kw 1 min 1 9 min 1 12 min Nm 2. A ASM 2 M 1. kw 1 min 1 8 min 1 1 min 1 9. Nm 3. A ASM 2 L 2. kw 1 min 1 8 min 1 1 min Nm 4. A ASM 2 U 24. kw 1 min 1 8 min 1 1 min Nm 8. A ASM 2W 12. kw 7 min 1 8 min 1 1 min Nm 29. A ASM 32 M 32. kw 1 min 1 8 min 1 1 min Nm 77. A ASM 32 L 4. kw 1 min 1 8 min 1 1 min Nm 99. A ASM 32W. kw 7 min 1 8 min 1 1 min Nm 43. A Asynchronous motors with hollow shaft Rated power output Rated speed Max. speed Rated torque Rated current Standard bearing Spindle bearing ASM 2 UH 1. kw 1 min 1 12 min 1 1 min Nm 2. A ASM 2 MH 1. kw 1 min 1 12 min 1 9. Nm 3. A ASM 2 LH 2. kw 1 min 1 12 min Nm 4. A ASM 2 UH 22. kw 1 min 1 1 min 1 12 min Nm 4. A 2
4 Asynchronous Motors with Solid Shaft ASM 2 Series Spindle motors with 2 pole pairs Rated power output. kw to 1 kw Choice of standard or spindle bearing Motor ASM 2 M ASM 2 L ASM 2 U Rated voltage U N 2 V 3 V 33 V Rated power output P N. kw 7. kw 1. kw Rated shaft speed n N 1 min 1 Rated torque M N (1 K) 3. Nm 47.8 Nm 3.7 Nm Rated current I N (1 K). A 2.1 A 2. A Efficiency.8 Max. speed n max 1) Standard bearing Spindle bearing 9 min 1 9 min 1 12 min 1 min 1 12 min 1 Max. current I max 33 A 3 A 44 A Weight m 1 kg 8 kg 83 kg Rotor inertia J 24 kgcm 2 33 kgcm 2 4 kgcm 2 Protection IP 4 Fan Rated voltage U L Rated current I L Frequency f L 3AC 4 V.2 A Hz/ Hz ID Motor with standard bearing Motor with spindle bearing 1) The max. speed depends on the motor s application conditions, such as the shaft load (contact SEM for further details). Rotatable connections 3
5 ASM 2 M With standard bearing With spindle bearing PG 21 PG Fixed Fixed bearing bearing 38k j Air flow PG 21 PG 11 38k j ASM 2 M/ k 12 1 PG 21 PG 11 j ASM 2 L PG 21 PG ASM 2 U PG 21 PG 11 38k j PG 21 PG k j Air flow Air flow 1 PG 21 PG k 38k j j
6 Asynchronous Motors with Solid Shaft ASM 2 Series Spindle motors with 2 pole pairs Rated power output 12 kw to 24 kw Choice of standard or spindle bearing Motor ASM 2 M ASM 2 L ASM 2 U ASM 2W Rated voltage U N 348 V 331 V 3 V 33 V Rated power output P N 1 kw 2 kw 24 kw 12 kw Rated shaft speed n N 1 min 1 7 min 1 Rated torque M N (1 K) 9. Nm 128. Nm. Nm. Nm Rated current I N (1 K) 3. A 4. A 8. A 29. A Efficiency.8 Max. speed n max 1) Standard bearing Spindle bearing* 8 min 1 8 min 1 1 min 1 or 12 min 1 1 min 1 Max. current I max 7 A 9 A 11 A 2 A Weight m 112 kg kg kg kg Rotor inertia J 7 kgcm 2 92 kgcm 2 11 kgcm 2 11 kgcm 2 Protection IP 4 Fan Rated voltage U L Rated current I L Frequency f L 3AC 4 V.3 A Hz/ Hz ID Motor with standard bearing Motor with spindle bearing 1 min 1 12 min 1 1) The max. speed depends on the motor s application conditions, such as the shaft load (contact SEM for further details). * Please select when ordering Rotatable connections
7 ASM 2 M With standard bearing With spindle bearing k 2j Air flow 42k 2j ASM 2 L k 2j Air flow 42k 2j ASM 2 U ASM 2W k 2j Air flow 42k 2j
8 Asynchronous Motors with Solid Shaft ASM 32 Series Spindle motors with 2 pole pairs Rated power output kw to 4 kw Motor ASM 32 M ASM 32W ASM 32 L Rated voltage U N 317 V 32 V 31 V Rated power output P N 32 kw kw 4 kw Rated shaft speed n N 1 min 1 7 min 1 1 min 1 Rated torque M N (1 K) 23.7 Nm Nm 24. Nm Rated current I N (1 K) 77. A 43. A 99. A Efficiency.8.91 Max. speed n max 1) Standard bearing Spindle bearing 8 min 1 1 min 1 Max. current I max 1 A 8 A A Weight m 24 kg 28 kg Rotor inertia J 1 87 kgcm kgcm 2 Fan Rated voltage U L Rated current I L Frequency f L 3AC 4 V. A Hz/ Hz ID Motor with standard bearing Motor with spindle bearing 1) The max. speed depends on the motor s application conditions, such as the shaft load (contact SEM for further details). Rotatable connections 7
9 ASM 32 M ASM 32W Air flow m 3j 1.H ASM 32 L Air flow m 3j 1.H
10 Asynchronous Motors with Hollow Shaft ASM 2 UH Hollow-shaft spindle motor with 2 pole pairs Rated power output to 1 kw With spindle bearing Motor Rated voltage U N Rated power output P N ASM 2 UH 33 V 1. kw Rated shaft speed n N 1 min 1 Rated torque M N (1 K) Rated current I N (1 K) 3.7 Nm 2. A Efficiency.8 1) Max. speed n max Spindle bearing 12 min 1 1 min 1 Max. current I max Bore hole in shaft Weight m 44 A 9 mm 91 kg Rotor inertia J 4 kgcm 2 Protection IP 4 Fan Rated voltage U L Rated current I L Frequency f L 3AC 4 V.2 A Hz/ Hz ID Motor with spindle bearing 1) The max. speed depends on the motor s application conditions, such as the shaft load (contact SEM for further details). Rotatable connections 9
11 ASM 2 UH 12 min 1 With spindle bearing M2 12 PG 21 8 Y 38k 1 14 L j 1 1 X 42 *) ASM 2 UH 1 min 1 With spindle bearing M Y 38k 12 1 L PG X 1 1 X Y 1.2. A.7 A.4. A.4.7 A 9 42 *) = Air outlet at the rear *) = Coolant connection on the right side, e.g. from Deublin A M1 x 1.GLH M1 x 1.GRH
12 Asynchronous Motors with Hollow Shaft ASM 2 xh Series Hollow-shaft spindle motor with 2 pole pairs Rated power output 1 kw to 22 kw With spindle bearing Motor ASM 2 MH ASM 2 LH ASM 2 UH Rated voltage U N 348 V 331 V 3 V Rated power output P N 1 kw 2 kw 22 kw Rated shaft speed n N 1 min 1 Rated torque M N (1 K) 9. Nm 128. Nm 14. Nm Rated current I N (1 K) 3. A 4. A 4. A Efficiency.8 1) Max. speed n max Spindle bearing* 12 min 1 1 min 1 or 12 min 1 Max. current I max 7 A 9 A 11 A Weight m 12 kg 143 kg kg Rotor inertia J 7 kgcm 2 92 kgcm kgcm 2 Protection IP 4 Fan Rated voltage U L Rated current I L Frequency f L 3AC 4 V.3 A Hz/ Hz ID Motor with spindle bearing 1 min 1 12 min 1 1) The max. speed depends on the motor s application conditions, such as the shaft load (contact SEM for further details). * Please select when ordering Rotatable connections 11
13 ASM 2 MH With spindle bearing M Y 42k 2j *) X ASM 2 LH M Y 42k 2j *) X ASM 2 UH X Y 1.2. A.7 A.4. A.4.7 A M2x1. L 12 7 Y 42k 2j *) X = Air outlet on both sides *) = Coolant connection on the right side, e.g. from Deublin A M1 x 1.GLH M1 x 1.GRH
14 Asynchronous Motors Characteristics of Power and Torque ASM 2 M ASM 2 M/ S1 1 min 1 min 1 12 min 1. kw. kw. kw 3. Nm 8.8 Nm 4.4 Nm. A S1 1 min 1 1 min 1 min 1. kw. kw 3. kw 3. Nm 3. Nm 1.8 Nm. A S-% 1 min 1 min 1 12 min 1 S-4% 1 min 1 min 1 12 min 1 S-2% 1 min 1 min 1 12 min 1 7. kw 7. kw 7. kw 7.9 kw 7.9 kw 7.9 kw 9. kw 9. kw 9. kw 44.7 Nm 11.2 Nm. Nm.4 Nm 12. Nm.3 Nm.7 Nm 1.2 Nm 7. Nm 22. A 24. A 28. A S-% 1 min 1 7. kw 1 14 min 7. kw S-4% 1 min kw 1 min 7.9 kw S-2% 1 min 1 9. kw 1 12 min 9. kw 44.7 Nm 4.8 Nm.4 Nm.8 Nm.7 Nm 7. Nm 22. A 24. A 28. A P [kw] 1 14 UZ = V 12 UZ = V 1 8 S -2% S -4% S -% n [min 1 ] 8 M [Nm] S -2% S -4% S -% n [min 1 ] Note S mode: Cycle duration 1 min. During the rest preiod the motor is idle.
15 ASM 2 L ASM 2 U S1 1 min 1 min 1 12 min 1 7. kw 7. kw 7. kw 47.8 Nm 12. Nm. Nm 2.1 A S1 1 min 1 1 min 1 12 min 1 1. kw 1. kw 8. kw 3.7 Nm 9. Nm.4 Nm 2. A S-% 1 min min 1 12 min kw 9.8 kw 8. kw 2. Nm 9. Nm.8 Nm 24. A S-% 1 min 1 1 min 1 12 min kw 12. kw 1. kw 79.8 Nm 11.9 Nm 8. Nm 29. A S-4% 1 min 1 9 min 1 12 min kw 11. kw 8. kw 73.4 Nm 11. Nm.8 Nm 27. A S-4% 1 min 1 9 min 1 12 min kw 14. kw 11. kw 89.4 Nm 19.1 Nm 8.8 Nm 32. A S-2% 1 min 1 7 min 1 12 min 1. kw. kw 8. kw 83. Nm 1. Nm.8 Nm 31. A S-2% 1 min 1 7 min 1 12 min kw 17. kw 12. kw. Nm 21.7 Nm 9. Nm 37. A 2 P [kw] 1 S -2% UZ = V UZ = V 14 S -4% 12 S -% n [min 1 ] Torque perormance curve M [Nm] 12 1 S -2% S -4% 8 S -% n [min 1 ] 14
16 ASM 2 UH ASM 2 M, ASM 2 MH S1 1 min 1 1 min 1 12 min 1 1 min 1 1. kw 1. kw 8. kw 4. kw 3.7 Nm 9. Nm.4 Nm 2. Nm 2. A S1 1 min 1 min 1 1 min 1 12 min 1 1. kw 1. kw 1. kw 4. kw 9. Nm 22. Nm 9. Nm 3.2 Nm 3. A S-% 1 min 1 1 min 1 12 min 1 1 min 1 S-4% 1 min 1 9 min 1 12 min 1 1 min 1 S-2% 1 min 1 7 min 1 12 min 1 1 min kw 12. kw 1. kw. kw 14. kw 14. kw 11. kw. kw 17. kw 17. kw 12. kw 7. kw 79.8 Nm 11.9 Nm 8. Nm 3.2 Nm 89.4 Nm 19.1 Nm 8.8 Nm 3.8 Nm. Nm 21.7 Nm 9. Nm 4. Nm 29. A 32. A 37. A S-% 1 min 1 min 1 9 min 1 S-4% 1 min 1 4 min 1 8 min 1 S-2% 1 min 1 4 min 1 min 1 2. kw 2. kw. kw 2. kw 2. kw 1.8 kw 32. kw 32. kw 23.7 kw Nm 38.2 Nm 14.3 Nm 19.2 Nm 3.1 Nm 2.1 Nm 23.7 Nm 7.4 Nm 37.7 Nm 43.3 A 2.3 A. A P [kw] UZ = V S -2% S -% UZ = V P [kw] UZ = V UZ = V S -2% 1 2 S -4% 8 2 S -% n [min 1 ] n [min 1 ] M [Nm] S -2% S -4% S -% M [Nm] S -2% S -4% S -% n [min 1 ] n [min 1 ] 1
17 ASM 2 L, ASM 2 LH ASM 2 U S1 1 min 1 min 1 1 min 1 12 min 1 S-% 1 min 1 min 1 1 min 1 12 min 1 S-4% 1 min 1 min 1 1 min 1 S-2% 1 min 1 min 1 8 min 1 2. kw 2. kw. kw 8. kw 2. kw 2. kw 1. kw 8. kw 3. kw 3. kw 17. kw 37. kw 37. kw 24. kw Nm 29.4 Nm 12.4 Nm.4 Nm 19.2 Nm 39.4 Nm 1.3 Nm.4 Nm 191. Nm 2.1 Nm 1.7 Nm 23. Nm 7.7 Nm 28. Nm 4. A. A. A 79. A S1 1 min 1 74 min 1 1 min 1 S-% 1 min 1 7 min 1 1 min 1 S-4% 1 min 1 min 1 1 min 1 S-2% 1 min 1 4 min 1 7 min kw 24. kw. kw 3. kw 3. kw 22. kw 38. kw 38. kw 2. kw 48. kw 48. kw 41. kw 12.8 Nm 31. Nm 17.2 Nm 191. Nm 4.9 Nm 21. Nm Nm. Nm 24.8 Nm 3. Nm 11.9 Nm.9 Nm 8. A 7.2 A 81.8 A 1. A P [kw] S -2% UZ = V UZ = V 3 S -4% 2 S -% n [min 1 ] 27 M [Nm] 2 22 S -2% S -4% S -% n [min 1 ] 1
18 ASM 2 UH ASM 2W S1 1 min 1 74 min 1 1 min kw 22. kw 1. kw 14.1 Nm 28.4 Nm 1.3 Nm 4. A S1 7 min 1 min 1 1 min kw 12. kw 4. kw 12.8 Nm 22.9 Nm 3.8 Nm 29. A S-% 1 min 1 min 1 1 min 1 3. kw 3. kw 2. kw 191. Nm 44.1 Nm 19. Nm 7. A S-% 7 min 1 3 min 1 min kw 17. kw 11.3 kw Nm.7 Nm. Nm 38.1 A S-4% 1 min 1 min 1 1 min 1 3. kw 3. kw 24. kw Nm.8 Nm 22.9 Nm 77. A S-4% 7 min 1 2 min 1 3 min kw 22. kw 19. kw 28.1 Nm 84. Nm 1.8 Nm 4.4 A S-2% 1 min 1 min 1 1 min 1 4. kw 4. kw 27. kw 28. Nm 8.9 Nm 2.8 Nm 97. A P [kw] 4 4 S -2% UZ = V UZ = V 3 S -4% 3 S -% n [min 1 ] 32 M [Nm] S -2% S -4% S -% n [min 1 ] 17
19 ASM 32 M ASM 32 L S1 1 min 1 min 1 1 min kw 32. kw 19. kw 23.7 Nm. Nm. Nm 77. A S1 1 min 1 min 1 1 min 1 4. kw 4. kw 21. kw 24. Nm 77.9 Nm 21. Nm 99. A S-% 1 min 1 min 1 1 min kw 43. kw 2. kw Nm 71. Nm 23.9 Nm 98. A S-% 1 min 1 4 min 1 1 min 1 3. kw 3. kw 24. kw Nm 112. Nm 22.9 Nm 123. A S-4% 1 min 1 min 1 min 1 3. kw 3. kw 48. kw Nm 8.2 Nm 7.4 Nm 1. A S-4% 1 min 1 4 min 1 1 min 1. kw. kw 28. kw 42.2 Nm 14.1 Nm 2.7 Nm 148. A P [kw] S -4% S -% UZ = V UZ = V P [kw] S -4% S -% UZ = V n [min 1 ] n [min 1 ] M [Nm] 3 S -4% 32 3 S -% 27 M [Nm] S -4% S -% n [min 1 ] n [min 1 ]
Dual displacement motor A10VM Plug-in dual displacement motor A10VE for open and closed circuit applications
Replaces: 04.95 Dual displacement motor 10VM Plug-in dual displacement motor 10VE for open and closed circuit applications Size 28-60 Series 5 Nominal pressure 280 bar Peak pressure 350 bar 10VM Contents
Fixed Displacement Motor A4FM
Fixed Displacement Motor 4FM RE 91 12/4. replaces: 3.95 and RE 91 1 for open and closed circuits Sizes 22...5 Series 1, Series 3 Nominal pressure up to bar Peak pressure up to 45 bar Index Features 1 Ordering
Data sheet Pressure switch type CS December 2001 DKACT.PD.P10.A B1119
Pressure switch type CS December 2001 DKACT.PD.P10.A2.02 520B1119 Introduction Pressure switch type CS is part of the Danfoss pressure control range. All CS pressure switches have a built-in pressure-operated,
Limit switches OsiSense XC Special For material handling applications, type XC1 AC
Presentation For material handling applications, type XC C b XC C with slow break contacts v With head for linear movement () 00_ 00_ 000_ Page / 00_ 00_ XCC XCC Page / XCC XCC / General characteristics
Fixed Displacement Pump KFA for commercial vehicles in open circuits
RE 91 501/05.98 Replaces: 11.96 Fixed Displacement Pump KFA for commercial vehicles in open circuits Sizes 23...107 Series 6 Nominal pressure 300 bar Peak pressure 350 bar KFA List of contents Features
Pressure switches for air and water CS
Data sheet Pressure switches for air and water CS CS pressure switches have a built-in pressure operated, three-pole switch. The contact position of which depends on the pressure in the connector and the
G SERIES METRIC MACHINE SCREW ACTUATOR
G SERIES METRIC MACHINE SCREW ACTUATOR kn to 0kN Duff-Norton metric actuators are manufactured to the same high quality standards and include all the same features and benefits as the standard line of
stepper motor 2-phase hybrid stepper motor (bipolar) high protection class with plug or stranded wires optional with encoder / brake
stepper motor 2-phase hybrid stepper motor (bipolar) high protection class with plug or stranded wires optional with / brake / 9 www.igus.de MOT-AN-S_EN_2070# part number (not configurable, only for illustration)
Scroll down to view your document!
Over years cumulative experience hour rush turnaround / technical support service Established in 99 The leading independent repairer of servo motors and drives in North America. Visit us on the web: www.servo-repair.com
Fixed Displacement Plug-In Motor A2FE
www.phphyds.com Series 6, axial tapered piston, bent axis design for mounting in mechanical gearboxes Sizes 28...355 Nom. Pressure up to 400 bar Peak Pressure up to 450 bar he fixed displacement plug-in
Page - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 ITEM QUANTITY FOR MODEL 302
CONTENTS. Page - SPECIFICATIONS 200 SPECIFICATION 200 SELECTION CHART PFC 201 SELECTION CHART 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 2 204 PERFORMANCE CURVE 3 205 PERFORMANCE CURVE
TANDEM MODULATOR FOR OUTLET GAS FLOW: STEPPED (836 TANDEM) - CONTINUOUS (837 TANDEM) SERVO-CONTROLLED PRESSURE REGULATOR
SIT Group 836-837 TANDEM MULTIFUNCTIONAL GAS CONTROL MODULATOR FOR OUTLET GAS FLOW: STEPPED (836 TANDEM) - CONTINUOUS (837 TANDEM) SERVO-CONTROLLED PRESSURE REGULATOR ALL ADJUSTMENTS ACCESSIBLE FROM ABOVE
Fixed Displacement Motor A4FM
Industrial Hydraulics Electric Drives and Controls Linear Motion and ssembly echnologies Pneumatics Service utomation Mobile Hydraulics Fixed Displacement Motor 4FM RE 91 12/4. replaces: 3.95 and RE 91
MPRM1690 MPRM2590 MPRM3290
Pinze elettriche radiali a 2 griffe 2-jaw radial electric grippers MPRM 2-jaw radial self-centering electric gripper Plug & play user friendly gripper. No electricity consumption when gripper is engaged.
Variable Displacement Double Pump A20VO. Series 1, for open circuits Axial piston - swashplate design, Back to back - design
Brueninghaus Hydromatik Series 1, for open circuits Axial piston - swashplate design, Back to back - design RE 93100/02.97 Sizes 60...260 Nominal Pressure up to 350 bar Peak Pressure up to 400 bar Preliminary
Technical information
Technical information 1.1 Design Elektror medium pressure blowers of the RD range are radial ventilators with double-wall impellers made from sheet aluminium respectively from sheet steel. They are directly
Series BLK Oil - air cooler
Series BLK Oil - air cooler maintenance friendly design broad performance range compact dimensions rugged cooling matrix low noise emissions comprehensive accessories DE 35 0001 04/2004 Bühler Meß- und
RP series Rotor Pumps
ontact etails RP series Rotor Pumps Nomenclature Features Low noise Substantial reduction of the operation noise, by to db (comparison with aikin products), and improved sound quality are achieved by adopting
CALEFFI. Ball zone valves. series /03 GB
all zone valves series cert. n ISO / Function Zone valves are used to automatically shut-off the flow of carrier fluid distributed to a system. Specifically: -In central heating systems, they support the
Proportional Pressure-Relief Cartridge Valve, Size 2...4
Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description proportional pressure-relief valves are direct acting
Electromechanical pressure switches
Presentation Electromechanical pressure switches OsiSense XM For power circuits, type XMP Presentation Pressure switches type XMP are switches for power circuits (direct switching), with an adjustable
Pressure switch KP-E. Data sheet
Data sheet Pressure switch KP-E KP-E pressure switches for use in refrigeration and air conditioning systems are equipped with SPDT gold plated contacts and stainless steel bellows. The high pressure switches
Gripping rotary modules
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
Inverse Proportional Pressure-Relief Cartridge, Size 10
Inverse Proportional Pressure-Relief Cartridge, Size 1 Q max = 12 l/min, p max = 3 bar Seated pilot, spool-type main stage, damped design 1 Description inverse-proportional pressure-relief valves are size
Cost effective. Smooth. Reliable. LOG Internal Hole Gripper
LOG Cost effective. Smooth. Reliable. LOG Internal Hole Gripper Light gripper made of very resistant polyamide with closed diaphragm system Field of Application Particularly suited to highly dynamic applications
SOLENOID VALVES AND PNEUMATIC VALVES
9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, 2 and 3 The Series 9 electropneumatically or pneumatically operated
HYBRID STEPPING MOTORS HY / HS / HN Series
HYBRID STEPPING MOTORS HY / HS / HN Series Long Life Compact Design Bipolar / Unipolar Models Holding Torque up to High Performances Series HS and HN Several Options available (Encoders, Gearboxes,Cables,
Position switches FP series
A Position switches FP series Selection diagram 0 08 8 9 0 0 0 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fiber glass rod gasket sphere sphere adjustable lever safety adjustable lever
Operating instructions Safety Rope Emergency Stop Switches ZB0052 / ZB0053 ZB0072 / ZB0073
Operating instructions Safety Rope Emergency Stop Switches UK ZB0052 / ZB0053 ZB0072 / ZB0073 7390878 / 02 03 / 2011 Contents 1 Safety instructions...3 2 Installation / set-up...4 2.1 Applications...4
(1) Warranty Certificate 01. (2) About the use of Traction Machine 03. (3) General Instructions 03. EMC Directive 03. Copy Right Low 03.
01 (1) Warranty Certificate 01. (2) About the use of Traction Machine 03. (3) General Instructions 03. EMC Directive 03. Copy Right Low 03. Sign - Symbol - Interpretation & Meaning 04. (4) Technical Drawing
Inverse Prop. Pressure-Relief Cart., Size 2 4
Inverse Prop. Pressure-Relief Cart., Size Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description inverse proportional pressure-relief valves are direct acting screw-in
ELECTRIC ACTUATORS for continuous underwater use
ELECTRIC ACTUATORS for continuous underwater use The SA multi-turn actuator for continuous underwater use by AUMA opens new applications for electric actuators for water supply, in hydropower plants and
1 Overview. Pressure Measurement Transmitters for basic requirements. 1/16 Siemens FI SITRANS P220 for gauge pressure
Siemens AG 204 Overview The pressure transmitter SITRANS P220 measures the gauge pressure of liquids, gases and vapors. Stainless steel measuring cell, fully welded Measuring ranges 2.5 to 600 bar (36.3
OMS Technical Information. Versions OMS. Versions
Versions Versions Mounting flange Shaft Port size European version US version Drain connection Check valve Main type designation Standard flange Cyl. 32 G 1/2 l Yes Yes Cyl. 1.25 in 7/8-14 UNF l Yes Yes
Inverse Proportional Pressure-Relief Cart., Size 2 4
Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 35 bar Direct acting, electrically operated Description Compact construction for cavity type AL 3/-6 UNF Operated by a proportional
VLT 2000 Series. How to size your VLT
Selection of frequency converter Usually the size of frequency converter is chosen on the basis of the shaft output, as this may be the only value known. However, if the data are known for both the application,
VSS data sheet 详情联系 :TEL 87 QQ:78 Extreme Vacuum Conditioning The combination of selected materials and a special conditioning process reduce the outg
详情联系 :TEL 87 QQ:78 ENG www.phytron.eu/vss EXTREME VSS Stepper Motor For Applications up to Ultra-high-vacuum Motors for use in vacuum should t only withstand the vacuum ( bursting of air inclusions), they
PRESSURE SEQUENCE VALVE TYPE UZK
PRESSURE SEQUENCE VALVE TYPE UZK Size 10, 20, 30 31,5 MPa up to 450 dm 3 /min WK 450 414 04. 2000r. Pressure sequence valves type UZK are used for switching a system or part of a system off when a set
LSA 42.2 /43.2 / & 4 P
3542 en - 9.27 / d Alternators 11.5... 3 kva - 2 Pole 12... 135 kva - 4 Pole SA 42.2 / 43.2 / 44.2-2 & 4 P Single phase dedicated Electrical and mechanical data SA 42.2 /43.2 / 44.2-2 & 4 P Single phase
Proportional Pressure-Relief Cartridge Valve, Size 2...4
Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min, p max = 3 bar Direct acting, electrically operated 1 Description proportional pressure-relief valves are direct acting screw-in cartridges
Prop. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08
Prop. -Way Pressure-Reducing Cart., Size / SAE 8 Q max = 1 l/min (4 gpm), p max = bar (6 psi) Direct acting, electrically operated 1 Description proportional -way pressure-reducing cartridges are size
Displacement 12, , Maximum flow rate (at 1450 rpm) bar.
00/07 ED PVD VARIABLE DISPLACEMENT VANE PUMPS SERIES 0 OPERATING PRINCIPLE The PVD pumps are variable displacement vane pumps with a mechanical type of pressure compensator. They allow instantaneous adjustment
Electromechanical pressure switches
References : pages / and / page /5 Presentation Functions Pressure switches type XMX and XMA are switches for control circuits, with an adjustable differential. They are used to control the pressure of
GasMultiBloc Combined regulator and safety valve Infinitely variable air/ gas ratio control mode MBC-300-VEF MBC-700-VEF MBC-1200-VEF
GasMultiBloc Combined regulator and safety valve Infinitely variable air/ gas ratio control mode MBC-00-VEF 7.03 Max. operating pressure 30 mbar Compact design High flow values Low weight Low power consumption
Axial piston variable motor A10VM Plug-in version A10VE
Electric Drives and Controls Hydraulics inear Motion and ssembly Technologies Pneumatics Service xial piston variable motor 10VM Plug-in version 10VE RE 91703/06.09 1/28 Replaces:09.07 Data sheet Series
DEVELOPING YOUR PREVENTIVE MAINTENANCE PROGRAM
DEVELOPING YOUR PREVENTIVE MAINTENANCE PROGRAM By Owe Forsberg, Senior Consultant You are the new Reliability Engineer in a plant that currently lacks documented procedures to maintain the plant. You have
APPLICATION. Conveyors Metal working machines Machines for agriculture Road building machines Mining machinery Food industries
HYDRAULIC APPLICATION Conveyors Metal working machines Machines for agriculture Road building machines Mining machinery Food industries Special vehicles Plastic and rubber machinery etc. CONTENTS Specification
Controllers DR, DP, FR and DFR
Controllers DR, DP, FR and DFR RE 9060 Edition: 04.014 Replaces: 10.006 For variable pump A4VSO series 1 and 3 Open circuit Features Control of pressure and flow Remote controlled optional Pressure controller
Introduction INDEX. INTRODUCTION HSE
Introduction INDEX SECTION PAGE INTRODUCTION ORDERING CODE GLOSSARY MOTOR OPTION TECHNICAL SE SE3 / SE5 SE7 / S7 SE9 / S9 SE12 / S12 SE14 / S14 SE14-2 / S14-2 SE17 / S17 SE17-2 / S17-2 SE21 / S21 SE21-2
Differential pressure controls, Type MP 54, 55 and 55A
MAKING MODERN LIVING POSSIBLE Technical brochure Differential pressure controls, Type MP 54, 55 and 55A MP 54 and oil pressure controls are used as safety switches to protect refrigeration compressors
Réf GB /d ALTERNATORS LSA Pole - Three phase. Electrical and mechanical data
Réf. 264 GB - 2.33/d - 9. 3 2 1 1 ALTERNATORS LSA 42.2-4 Pole - Three phase Electrical and mechanical data TYPICAL DATA ALTERNATORS Hz - 1 r.p.m. Insulation class H Excitation system Shunt A R E P Winding
Tightness controls TC 1 3 and TC 4
Tightness controls TC 1 3 and TC 4 Test of both safety valves Short test period thanks to logical decision-making in the program sequence Adjustable test period which can be adapted to different systems
Inverse Proportional Pressure-Relief Cart., Size 2 4
Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 5 bar Direct acting, electrically operated 1 Description inverse proportional pressure-relief valves are direct acting screw-in cartridges
CJTX-C 15/15 0,75 (2V) F-400. Impeller size 2-speed fan. Installed power. (r/min) 230 V 400 V 690 V (kw) m3/h db(a) (kg)
CJTX-C 400 C/2h belt-driven double inlet extractor fan units. Order code 400 C/2h extractor fan units, with motor and transmission mounted inside the box, to operate outside the fire zone. Fan: Galvanised
Prewired position switches FA series
2 Prewired position switches FA series Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 51 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable lever 41 45
Single and double acting, magnetic, self-centering Bores: ø 16, 20, 25, 32, 40 mm
> Series CGPT self-centering parallel grippers with T-guide Series CGPT self-centering parallel grippers with T-guide Single and double acting, magnetic, self-centering Bores: ø 6, 20, 25, 32, 40 mm New
MULTIFUNCTIONAL CONTROL FOR GAS BURNING APPLIANCE
SIT Group SIT -3- SIGMA MULTIFUNCTIONAL CONTROL FOR GAS BURNING APPLIANCE 9.955. Subject to change without notice Application Domestic gas appliances: central heating boilers, combi boilers, instantaneous
Pressure controls for hydro carbons, zone II applications, Type KPE
MAKING MODERN LIVING POSSIBLE Technical brochure Pressure controls for hydro carbons, zone II applications, Type KPE KPE pressure controls for use in refrigeration and air conditioning systems with hydrocarbons
Level switches Series LD Vibrating fork level switch for liquids and solids
Level switches Series LD Vibrating fork level switch for liquids and solids Robust and compact Suitable for liquids (model LD61) and solids (model LD60) No moving parts, low maintenance Corrosion resistant
Level switches Series LD Vibrating fork level switch for liquids and solids
Level switches Series LD Vibrating fork level switch for liquids and solids Robust and compact Suitable for liquids (model LD61) and solids (model LD60) No moving parts, low maintenance Corrosion resistant
Micro grippers HGPM/HGWM
HGPM/HGWM Miniaturised and optimised for assembly tasks Versatile 2004/10 Subject to change Products 2004/2005 1 / 1 HGPM/HGWM Key features HGWM HGPM 1 2 3 4 1 2 3 4 System product for handling and assembly
RS 2-75 D 109 D RSF 87 D 127 D with direct drive
Screw compressors RS 2-75 D 109 D RSF 87 D 127 D with direct drive Made in Germany Motor size: 75 127 kw RENNER GmbH Kompressoren Success Rooted in Tradition. RENNER GmbH Kompressoren have been known for
Proportional Throttle Cartridges, Size 16
Proportional Throttle Cartridges, Size 16 Q max = 5 l/min, p max = 5 bar, Q N max = 14 l/min at p 1 bar Two-Stage, with Seat-Valve Shut-Off 1 Description Normally closed Seat-valve shut-off from 1 Compact
Centriflow Plus High-pressure plug fan - Technical Data
Centriflow Plus 3 High-pressure plug fan - Technical Data Contents General description...3 General survey chart...4 Design description Fan Impeller...5 Fan Inlet...5 base with base frame...5 Hub...5 Air
50Hz. water solutions. O SerieS DGO DRO
Hz water solutions O SerieS DGO DRO D a t a b o o k l e t EN water solutions O SerieS DGO DRO Hz D a t a b o o k l e t O SERIES O Series General characteristics AISI stainless steel lifting and carrying
Axial piston-variable motor A10VM Plug-in version A10VE
Electric Drives and Controls Hydraulics inear Motion and ssembly Technologies Pneumatics Service xial piston-variable motor 10VM Plug-in version 10VE R 91703/06.09 1/28 Replaces:11.07 Technical Data Sheet
OMS Technical Information Technical data
Technical data TECHNICAL DATA FOR OMS Type OMS OMS OMS OMS OMS OMS OMS OMS OMS OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSS OMSS OMSS OMSS OMSS OMSS OMSS OMSS OMSS Motor size 80 100 125 160 200 250
Monitoring device NTS 30
P R O D U C T I N F O R M A T I O N Electronic level- and temperature monitoring device Monitoring device NTS 30 Contents Description Description... 2 Operating... 3 Design and electrical data... 4 Circuit
DENISON HYDRAULICS vane pumps - single, double T6G - T67G - T6ZC
DENISON HYDRAULICS vane pumps - single, double T6G - T67G - T6ZC Publ. 1 - EN0709 - A 01 / 2000 / 2500 / FB Replaces : 1 - EN 084 - B L25-10709 - 1 CONTENTS GENERAL CHARACTERISTICS T67GB T6GC - T6ZC T67GB
4/2 way Pneumatic Solenoid Valve
4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11
Differential Pressure Control Types MP 54, MP 55 and MP 55A
MAKING MODERN LIVING POSSIBLE Data sheet Differential Pressure Control Types MP 54, MP 55 and MP 55A MP 54 and MP 55 oil differential pressure controls are used as safety switches to protect refrigeration
TECHNICAL DESCRIPTION
TECHNICAL DESCRIPTION Exhaust Hose Reel ser. 865, electric motor driven No. 981118101 Description Limit switches, for hose coiling and uncoiling integrated in drive unit. Motor turns drum via a planetary
Precision pressure regulators LRP/LRPS
Precision pressure regulators LRP/LRPS q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
60HZ XIANDAI PUMP. CDL/CDLF Vertical Multistage Pump ZHEJIANG XIANDAI PUMP CO.,LTD. ZHEJIANG XIANDAI PUMP CO.,LTD.
TECNICAL DATA INCLUDED IN TIS BROCURE MAY BE CANGE FROM TIME TO TIME DUE TO TE PRODUCT IMPROVEMENTS UNDERTAKES BY TE MANUFACTURER. TE COMPANY RESERVES TE UNCONDITIONAL RIGTS TO IMPLEMENT SUC CANGES WITOUT
TeSys protection components
Presentation, description -pole thermal overload relays TeSys D Presentation TeSys D thermal overload relays are designed to protect a.c. circuits and motors against: b overloads, b phase failure, b excessively
1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/16 Siemens FI US Edition
Siemens AG 206 Overview Design Device structure without explosion protection The pressure transmitter consists of a piezoresistive measuring cell with a diaphragm installed in a stainless steel enclosure.
Tightness control TC. Product brochure GB 3 Edition AGA
Tightness control TC Product brochure GB 3 Edition 07.14 AGA Test of two safety valves Short test period thanks to logical decision-making in the program sequence Adjustable test period which can be adapted
Lely Aircon LA30 Wind turbine
Lely Aircon LA30 Wind turbine Summary Details for Performance, Duration and Acoustic Measurements Lely Aircon 30 Wind Turbine UK MCS Certification Summary List of contents 1. List of included Amendments...
Data sheet. Pressure switches and thermostats Type KPS 10/2003 DKACT.PD.P10.E B0782
Data sheet Pressure switches and thermostats Type KPS 10/2003 DKACT.PD.P10.E2.02 520B0782 Survey Type KPS pressure switches 1. Standard pressure switches Range Further -1 0 10 20 30 40 50 60 bar P e Type
Pressure Reducing Valve DMV 750 set range: bar
Pressure Reducing Valve DMV 750 set range:.0-6.0 bar Advantage pressure setting possible at any time, also during operation hermetically sealed by valve diaphragm high level of operating safety and long
RS D RSF D with direct drive
Screw compressors RS 2-75 109 D RSF 87 127 D with direct drive Made in Germany Motor power: 75 127 kw RENNER GmbH Kompressoren success rooted in tradition. RENNER GmbH Kompressoren have been known for
PVQ 13 A2 R SE 1 S 20 C-11 D
PVQ - Variable Displacement Piston Pump PVQ 13 A2 R SE 1 S 2 C-11 D 1 2 3 4 6 7 8 9 1 1 Model Series PVQ Inline Piston Pump Variable Volume Quiet Series 4 Rotation Viewed from shaft end R Right hand, standard
CFSW. Hinges with built-in safety multiple switch
CFSW. Hinges with built-in safety multiple switch ELESA Original design technical informations Material - Hinge body: self-extinguish high-rigidity SUPER-technopolymer, black colour. Resistant to solvents,
Pressure switch Type BCP
Data sheet Pressure switch Type BCP The BCP type is a series of dedicated switches for safety and monitoring of steam and hot water boilers. The BCP incorporates a single-pole changeover microswitch where
Accessories. Valves. Adjustable Pressure Relief Valves
Valves djustable Pressure Relief Valves djustable pressure relief valves allow for variable operating pressures anywhere between PSI ( bar). In order to prevent overloading of the motor, however, the maximum
Mechanical Pressure Measurement
Mechanical Pressure Measurement Differential Pressure Gauges Model GDP, Universal Version, with Diaphragm Element High Overpressure Safety PN 40, 100, 250 or 400 Applications Differential pressure measurement
Liquid ring vacuum pumps in compact design
Liquid ring vacuum pumps in compact design LEM 25, LEM 5 Pressure range: Suction volume flow: 33 to 113 mbar 4 to 6 m³/h CONSTRUCTION SIHI liquid ring vacuum pumps are displacement pumps of uncomplicated
CFSW. Hinges with built-in safety multiple switch
CFSW. Hinges with built-in safety multiple switch ELESA Original design Elesa Standards Main dimensions Fitting Weight Code Description L B f ±0.2 f 1 ±0.2 H h 1 h 2 d 3 d 4 C [Nm]# g 426601 CFSW.110-6-2NO+2NC-C-A
Pressure Reducing Valve DMV 755 set range: 1,0-9,0 bar
Pressure Reducing Valve DMV 755 set range:,0-9,0 bar Advantage pressure setting possible at any time, also during operation high reproducibility of the set pressure high level of operating safety and long
Meta-MEC Manual Motor Starters
Leader in Electrics & Automation Meta-MEC Manual Motor Starters Electric Equipment LG Meta-MEC Manual Motor Starters provide completed ranges up to 100A 45 mm 55 mm 32AF 2 45 mm 70 mm 63AF 100AF 3 LG Meta-MEC
Certified according to DIN EN ISO 9001 Technical Datasheet TRICOR Series Mass Flow Meters
www.kem-kueppers.com info@kem-kueppers.com Certified according to DIN EN ISO 9001 Technical Datasheet TRICOR Series Mass Flow Meters Description The Tricor Mass Flow Meters measure simultaneously mass
ATH 500 M. Pumping speed ATH 500 M. 3.1 Vacuum generation / Turbopumps / Magnetically levitated / ATH 500 M. Page 398 / Part 3.1
ATH 500 M Compact integrated drive Installation in any orientation Water or air cooled CE marked and ROHS compliant Heated version (MT) available for corrosive applicaitons. Pumping speed N 2 He H 2 Ar
Infrared Linescanners
Thermal Imaging and Temperature Profiles for Continuous Process Monitoring and Quality Control HD Infrared Linescanners PROCESS & ANALYTICAL INSTRUMENTS Mountings and Accessories LSPHD Mountings and Accessories
PFH. Application example. Pneumatic 2-Finger Parallel Gripper Long-stroke Gripper. Weight 2.65 kg 12.6 kg. Gripping force 630 N 2950 N
PFH www.comoso.com Sizes 30 50 Weight 2.65 kg 12.6 kg Gripping force 630 N 2950 N Stroke per finger 30 mm 100 mm Workpiece weight 3.15 kg 13 kg Application example Assembly unit for intermediate sleeves
Liquid ring compressors
Liquid ring compressors KPH 85220, KPH 85227 Compression pressures: Suction volume flow: 2 to 7 bar 940 to 1450 m³/h CONSTRUCTION TYPE Sterling SIHI liquid ring compressors are displacement compressors
DISC VALVE HYDRAULIC MOTORS
DISC VALVE HYDRAULIC CONTENTS Page Hydraulic otors Series S... 4 Hydraulic otors Series T... 25 Hydraulic otors Series V... 39 otor Special Features... 51 otors with Speed Sensor... 52 Application Calculation...
Available models Devices Color White sealing bellows Black sealing bellows NDT SW NDT GB NDT RT NDT GN NDT WS NDT BL NDT GR
Pushbuttons Left: type series N with sealing bellows, color white (standard). Right: type series N with sealing bellows, color black. Protective collar against unintentional actuation: refer to page 58
Product Information. Tolerance compensation unit TCU-Z
Product Information TCU-Z TCU-Z Compact. Flexible. Productive. TCU-Z tolerance compensation unit The TCU is compensated on the basis of elastomers that compensate in all three directions, enabling them
Precision Rotary Ball Screw
57E Precision Rotary Ball Screw Models DIR and BLR Outer ring Ball screw nut Deflector Section A Screw shaft Spacer Seal Collar Ball End cap Retainer End cap Ball Screw shaft Outer ring Structure of Standard-Lead
Pressure Measurement Single-range transmitters for general applications
Siemens AG 206 Overview Design Device structure without explosion protection The pressure transmitter consists of a piezoresistive measuring cell with a diaphragm installed in a stainless steel enclosure.