BUCKET ELEVATORS 1 BUCKET ELEVATORS. Technical Data for Bucket Elevators (BW)
|
|
- Ross Thompson
- 6 years ago
- Views:
Transcription
1 BUCKET ELEVATORS 1 BUCKET ELEVATORS for Bucket Elevators (BW)
2 BUCKET ELEVATORS 3 Contents Overview of Belt Bucket Elevators Overview of Chain Bucket Elevators BW 160 BW 200 BW 250 BW 315 BW 400 BW 500 BW 630 BW 800 BW 1000 BW 1250 Accessories and custom-made parts for Bucket Elevators /17
3 4 BUCKET ELEVATORS BUCKET ELEVATORS 5 Belt bucket elevators GBW 80 to GBW 1250 Chain bucket elevators with round link chains KBW 160 to KBW 1000 / / Gear types: Spur gears, offset shaft gears and bevel gears Gear types: Spur gears, offset shaft gears and bevel gears Drive types: Direct drive Drive types: Direct drive 2 mm (up to 19 m distance ) to (up to 60 m 2 mm (up to 19 m distance ) to (up to 60 m Shaft seals: Braided seal Shaft seals: Braided seal foot: Access doors/inspection flaps/movable inlet/bucket conveyor/ foot: Access doors/inspection flaps/movable inlet/bucket conveyor/ RPM monitoring/tensioning unit RPM monitoring/tensioning unit head: Inspection flaps/misalignment monitor/discharge plate adjustable head: Inspection flaps/discharge plate adjustable Containers: DIN /DIN /DIN /DIN Containers: DIN /DIN /DIN /DIN Additional options: Additional options: Rupture discs/exhaustion/level indicator/slip monitoring/ Rupture discs/exhaustion/level indicator/slip monitoring/ Special bucket/special housing/bucket conveyor with moving scoop/ Special bucket/special housing/bucket conveyor with moving scoop/ Gravitational tensioning/separate backstop/ Gravitational tensioning/separate backstop/ Large heights on request Large heights on request Bucket shape medium deep DIN deep DIN Filling ratio Bucket width [mm] % Conveyor output [m 3 /h] at v = 1.3 m/sec 100 o.r. o.r. o.r o.r. 90 o.r. o.r. o.r o.r. 75 o.r. o.r. o.r o.r. 100 o.r. o.r. o.r o.r. o.r. o.r o.r. o.r. o.r max 90** o.r. o.r. o.r Bucket shape medium deep DIN deep DIN Filling ratio Bucket width [mm] % Conveyor output [m 3 /h] at v = 1.1 m/sec max 90** Conveyor output m 3 /h (theor.): The conveyor speed [v] and bucket spacing are assumed averages. They are determined in each case by product being conveyed and conveyor output. The actual bucket filling ratio to be chosen depends on the characteristics of the material being conveyed. o.r. = on request * Gauge depends on place of installation ** v=1.83 m/s, min. Bucket spacing Conveyor output m 3 /h (theor.): The conveyor speed [v] and bucket spacing are assumed averages. They are determined in each case by product being conveyed and conveyor output. The actual bucket filling ratio to be chosen depends on the characteristics of the material being conveyed. o.r. = on request * Gauge depends on place of installation ** v=1.3 m/s, min. Bucket spacing
4 6 BUCKET ELEVATORS BUCKET ELEVATORS 7 BW 160 BW DIN 15234/1.5 litre DIN 15234/2.36 litre 400 mm 400 mm 2 mm (up to 19 m distance ) to 3 mm (up to 30 m 2 mm (up to 19 m distance ) to 3 mm (up to 30 m 4 mm 4 mm 180 mm x 180 mm 220 mm x 220 mm 30 x x 400 mm KAZ57/KAZ67/KAZ77/KAZ87 KAZ57/KAZ67/KAZ77/KAZ87 Ø 50/60/70/80 Ø 50/60/70/80 Ø 40 Ø 40 Ø 500 Ø 500 Ø 500 Ø 500 Heights over 30 m distance on request Heights over 30 m distance on request * Gauge depends on place of installation * Gauge depends on place of installation
5 8 BUCKET ELEVATORS BUCKET ELEVATORS 9 BW 250 BW DIN 15234/4.6 litre DIN 15234/6 litre 500 mm 500 mm 2 mm (up to 19 m distance ) to 3 mm (up to 30 m 3 mm (up to 19 m distance ) to 4 mm (up to 45 m 270 mm x 270 mm 33 x x x 560 mm KAZ67/KAZ77/KAZ87 KAZ77/KAZ87/KAZ97 Ø 50/60/70/80 Ø 60/70/80/90 Ø 50 Ø 50 Ø 630 Ø 630 Ø 630 Ø 630 Heights over 30 m distance on request Heights over 45 m distance on request * Gauge depends on place of installation * Gauge depends on place of installation
6 10 BUCKET ELEVATORS BUCKET ELEVATORS 11 BW 400 BW DIN 15234/9.5 litre DIN 15234/15 litre 550 mm 600 mm 3 mm (up to 19 m distance ) to 4 mm (up to 45 m 3 mm (up to 19 m distance ) to 4 mm (up to 45 m 42 x x x 670 mm 490 mm x 800 mm KAZ87/KAZ97/KAZ107 KAZ97/KAZ107/KAZ127 Ø 80/90/100/110 Ø 90/100/110/115/125 Ø 70 Ø 80 Ø 710 Ø 800 Ø 710 Ø 800 Heights over 45 m distance on request Heights over 45 m distance on request * Gauge depends on place of installation * Gauge depends on place of installation
7 12 BUCKET ELEVATORS BUCKET ELEVATORS 13 BW 630 BW DIN 15234/23.6 litre DIN 15234/37.5 litre 650 mm 700 mm 3 mm (up to 19 m distance ) to 4 mm (up to 45 m 4 mm (up to 19 m distance ) to (up to 60 m 8 mm 8 mm 180 mm x 180 mm 830 mm x 830 mm 540 mm x 1000 mm 62 x 1200 mm KAZ97/KAZ107/KAZ127 KAZ107/KAZ127/KAZ157 Ø 100/110/115/125/135 Ø 110/115/125/135/140 Ø 90 Ø 100 Ø 900 Ø 1000 Ø 900 Ø 1000 Heights over 45 m distance on request Heights over 60 m distance on request * Gauge depends on place of installation * Gauge depends on place of installation
8 14 BUCKET ELEVATORS BUCKET ELEVATORS 15 BW 1000 BW DIN 15234/60 litre 2 x 630/projection as 800, similar to DIN 15234/2 x 29.5 liters 800 mm 650 mm 4 mm (up to 19 m distance ) to (up to 60 m 4 mm (up to 19 m distance ) to (up to 60 m 10 mm 10 mm 10 mm 10 mm 1040 mm x 1040 mm 830 mm x 1290 mm 630 mm x 1300 mm 630 mm x 1550 mm KAZ107/KAZ127/KAZ157 KAZ107/KAZ127/KAZ157 Ø 110/115/125/135/140 Ø 110/115/125/135/140 Ø 110 Ø 100 Ø 1250 Ø 1000 Ø 1250 Ø 1000 Heights over 60 m distance on request Heights over 60 m distance on request * Gauge depends on place of installation * Gauge depends on place of installation
9 16 BUCKET ELEVATORS BUCKET ELEVATORS 17 Accessories and custom-made parts for elevators Accessories and custom-made parts for elevators BUCKET CONVEYOR WITH MOVING SCOOP DIN BUCKETS WITH BELT For belt bucket elevators (from size 160) DIN BUCKETS WITH STEEL ROUND LINK CHAIN For remnant-free cleaning out of moving scoop For chain bucket elevators (from size 160) BUCKET ELEVATOR HEAD PLATFORM REX BUCKET WITH REX CHAIN For central chain bucket elevators (from size 315) SPECIAL BUCKETS WITH VENTILATION HOLES Self-supporting Can be mounted anywhere on the elevator towers For fine, compact goods such as cement
10 18 BUCKET ELEVATORS BUCKET ELEVATORS 19 DISCOVER THE AMF-BRUNS SERVICE WORLD! Reliable and powerful technology is a prerequisite for economic and efficient production. So that you can rely on your plant at any time, we deliver not only first-class technology, but also a tailor-made service portfolio. Because we want you to focus on essentials and be able to exploit the potential of your plant to the full. This includes professional installation and personal instruction for your staff, but also an efficient maintenance and servicing plan. For further questions about our services, we are at your disposal at any time - get in touch with us! WE ARE ALWAYS WITHIN EASY REACH With AMF-Bruns, you are putting your trust in a partner who is always at your side to ensure long-term, safe plant operation. Take advantage of the expertise and experience of our staff. On your behalf, they watch out for quality, ensure fast order processing and keep your budget in mind at all times. So you always get the best solution from us - safe, sustainable and economical. FIRST-CLASS SERVICE RIGHT FROM THE START Our aim is your satisfaction: it starts with planning but does not stop after commissioning. That s why we are constantly giving our employees technical training, to be able to provide you with optimum service in any situation. By ensuring professional installation and commissioning, our chief erectors, fitters and engineers ensure optimal settings of your machinery and after that are always available for advice and practical help - for instance in matters of plant optimization and maintenance. SPARE PARTS AND MAINTENANCE By using AMF-Bruns original parts you are always at the cutting edge of technology. Our special maintenance packages also ensure a high level of operational readiness of your plant. AMF Bruns maintains its own stock of spare parts - this way we can guarantee constant availability and speedy delivery, and remedy almost any technical problem without losing a great deal of time. It goes without saying that you have the full manufacturer s warranty on all our replacement parts. We will be pleased to advise you! SERVICE HOTLINE: + 49 (0) More information is available at or send us an service@amf-bruns.de AMF-BRUNS SERVICE WORLD FIRST CLASS ALSO FOR SERVICE
11 20 BUCKET ELEVATORS AMF-Bruns GmbH & Co. KG Hauptstraße Apen Germany Zertifiziertes Management-System DIN EN ISO 9001 Edition 04/2017
Diaphragm process pumps
123 Pleasant Ave. Upper Saddle River, NJ 07458 USA Toll Free. 1-800-217-3677 Tel. 1-201-934-3300 Web. www.chemacinc.com Email. Chemac@chemacinc.com Diaphragm process pumps Many pumping problems require
More informationV-Drive We drive the Performance. Maximum power density Constant torsional backlash Supreme smooth running
V-Drive We drive the Performance Maximum power density Constant torsional backlash Supreme smooth running V-Drive Basic The quiet endurance runner Servo worm gearheads with output shaft and hollow shaft.
More informationKLINGER CONAXE Double Offset High Performance Butterfly Valve DN
KLINGER CONAXE Double Offset High Performance Butterfly Valve DN 50-1300 www.klinger.kfc.at MF 01 KLINGER FLUID CONTROL Today for tomorrow As a subsidiary of the KLINGER Group, KLINGER Fluid Control has
More informationFixed Displacement Pump KFA for commercial vehicles in open circuits
RE 91 501/05.98 Replaces: 11.96 Fixed Displacement Pump KFA for commercial vehicles in open circuits Sizes 23...107 Series 6 Nominal pressure 300 bar Peak pressure 350 bar KFA List of contents Features
More informationPressure maintenance valve SDV-P / SDV-P-E
Translation of the original manual Pressure maintenance valve SDV-P / SDV-P-E Assembly and Operating Manual Superior Clamping and Gripping Imprint Imprint Copyright: This manual remains the copyrighted
More informationA WIRTGEN GROUP COMPANY MOBILE CRUSHING AND SCREENING PLANTS PRODUCT RANGE
A WIRTGEN GROUP COMPANY MOBILE CRUSHING AND SCREENING PLANTS PRODUCT RANGE COMPETENCE AS TRADITION KLEEMANN is part of the WIRTGEN GROUP, a group of companies in the plant construction industry who operate
More informationPro ducts. Automatic vacuum thermo-sealing machine with protective gas function
Pro ducts Automatic vacuum thermo-sealing machine with protective gas function POSSIBLE TOOLS AND TRAYS BS 34 Rectangular trays Circular trays Single use tool 280 x 210 x 58 210 Ø x 58 Double use tool
More informationGood things come in threes
3 Hardware for specialty gases Equipment, supply systems and services for specialty gases Good things come in threes 02 Hardware for specialty gases Everything under one roof The complete equipment range
More informationE 158 E 198 E 248. Tank top mounting Connection up to G11 / 4 Nominal flow rate up to 250 l/min e d
R e t u r n - S u c t i o n F i l t e rs E 158 E 198 E 248 Tank top mounting Connection up to G11 / 4 Nominal flow rate up to 250 l/min 20.90-5e 0.0-2d D e s c r i p t i o n Application For operation in
More informationescalino The convenient stair climber Conquer stairs easily and safely
The convenient stair climber escalino Conquer stairs easily and safely www.aat-online.de Be it a handicap or an illness, stairs restrict your personal mobility considerably. With the escalino you can enjoy
More informationTechnical data sheet. Type overview. Technical data. Safety notes. T5-R2.. Open-close en v Subject to changes 1 / 3
Technical data sheet R2.. Open-close ball valves, 2-way, with internal thread for open and closed cold and warm water systems for shut-off functions on the water side and 2-point controls in air-handling
More informationPressure and Flow Control Valves DBGM, German and European Patents
Pressure and Flow Control Valves DBGM, German and European Patents Absolutely Reliable Pressure and Flow Control In water mains of sizes DN 50 to DN 150, ERHARD Control Valves in straight or angle pattern
More information2-port and 3-port valves PN 16
OEM 2-port valves VVP459.10-0.63 to VVP459.25-6.3 3-port valves VXP459.10-0.63 to VXP459.25-6.3 3-port valves with bypass VMP459.10-0.63 to VMP459.20-4 2-port valves VVP459.25-6.3 to VVP459.40-25 3-port
More informationChain Drives. 1. As no slip takes place during chain drive, hence perfect velocity ratio is obtained
1. Introduction Chain Drives In Belt and Rope drives slipping may occur. In order to avoid slipping, steel chains are used. The chains are made up of a number of rigid links which are hinged together by
More informationSiphon vessel / Priming aid
Manufacturer: sera GmbH sera-straße 1 34376 Immenhausen Germany Tel.: +49 5673 999-00 Fax: +49 5673 999-01 info@sera-web.com Keep the operating manual for future use! Record the exact type and serial number
More informationTHE WATER-COOLED INDUSTRIAL RANGE
Energy-efficient compressor systems for air and gases 25 420 bar 55 1716 m 3 /h WATER-COOLED PRESSURE-RESISTANT CRANKCASES for Air, nitrogen, cng and rare gases The water-cooled industrial range from BAUER
More informationCost effective. Smooth. Reliable. LOG Internal Hole Gripper
LOG Cost effective. Smooth. Reliable. LOG Internal Hole Gripper Light gripper made of very resistant polyamide with closed diaphragm system Field of Application Particularly suited to highly dynamic applications
More informationProducts no longer available
Technical data sheet R2.. Characterized control valves, 2-way, with internal thread for open and closed cold and warm water systems for modulating control on the water side of air-handling and heating
More informationInstallation and Maintenance Instruction Manual
Installation and Maintenance Instruction Manual Bi-metal Thermometer Model A and E in a configuration - pursuant to ASME B40.200: ##=E#=### or ##=ERT#=### - pursuant to EN 13190: ###=A#=### or ##=ART#=###
More informationAir screwdrivers CSEZ
Air screwdrivers CSEZ Faster, shorter, more accurate Air screwdrivers CSEZ Ideal for some tightening operations on enamelled or painted components, a greater tightening speed was requested (about 2000
More informationCompact pressure switches for gas and air
Compact pressure es for gas and air / 5.0 Printed in Germany Edition 0.8 Nr. 9 544 6 Technical description The pressure is an adjustable compact pressure according to EN 854 for combustion plants. The
More informationAPPLICATION. Conveyors Metal working machines Machines for agriculture Road building machines Mining machinery Food industries
HYDRAULIC APPLICATION Conveyors Metal working machines Machines for agriculture Road building machines Mining machinery Food industries Special vehicles Plastic and rubber machinery etc. CONTENTS Specification
More informationTraysealer T 100. Tray packaging in the smallest space
Traysealer T 100 Tray packaging in the smallest space MULTIVAC T 100 Traysealer T 100 Tray packaging in the smallest space The compact, semiautomatic Traysealer T 100 easily and economically packs products
More informationFILTER CARTRIDGES THE GENUINE PRODUCT FOR YOUR PROTECTION AND THEIR SAFETY.
FILTER CARTRIDGES THE GENUINE PRODUCT FOR YOUR PROTECTION AND THEIR SAFETY. BREATHING AIR INDUSTRY WHY YOU SHOULD OPT FOR BAUER FILTER CARTRIDGES. TESTED COMPONENTS protect lives, health and equipment.
More informationOriginal. Installation and operating instructions. Safety unit 16569
Original Installation and operating instructions Safety unit 16569 Copyright ZERO CLAMP safety unit 16569 installation instructions. These operating instructions are the property of the company ZeroClamp
More informationMounting and Operating Instructions EB 2558 EN. Self-operated Pressure Regulators. Type Pressure Build-up Regulator
Self-operated Pressure Regulators Type 2357-31 Pressure Build-up Regulator with safety function and integrated excess pressure valve Type 2357-31 with non-return unit at port C Ports A and B with soldering
More informationPilot HON 625. Entwurf. Product information. serving the gas industry worldwide
Pilot HON 62 Entwurf Product information serving the gas industry worldwide Pilot HON 62 Application, characteristics Application Pilot for the gas pressure regulator HON 02 Pilot for outlet pressure control
More informationMetal Expansion Joints. System solutions for reliable connections in plant engineering and construction.
Metal. System solutions for reliable connections in plant engineering and construction. GASKETS TECHNICAL TEXTILES EXPANSION JOINTS INSULATION NEW MATERIALS Standard- and tailor-made : economic solutions
More informationExplosion Isolation. No matter what happens - nothing happens. / RICO Slide Valve RSV-D, RSV-G, RSV-P
Explosion Isolation. No matter what happens - nothing happens. / Ventex ESI-E/-D, ESI-C, ESI-P RICO Slide Valve RSV-D, RSV-G, RSV-P REDEX Flap REDEX Slide Confidence through safety: rico Sicherheitstechnik
More informationOperating Instructions in accordance with the Machines Directive 2006/42/EC
Lubricating Equipment Metering Technology for Grease and Oil High Pressure Hydraulic Customised Developments Operating Instructions in accordance with the Machines Directive 2006/42/EC Compressed air filling
More informationOverview of types. T5-R B2/R B2 en v Subject to changes 1 / 4. k vs (Sequence 2)
Technical data sheet R3015-..-..-B2 / R3020-..-..-B2 Characterised control valves, 6-way, with internal threads Two sequences (cooling/heating) With a rotary actuator 90 Water-side switching or modulating
More informationCellular Gas Filters DF 100. Product Information
Cellular Gas Filters DF 100 Product Information Reserve technical changes! Reprint not permitted! Table of Contents Application, Features, Technical Data 4 Application 4 Features 4 Technical Data 5 Design
More informationHydraulic hand test pump Models CPP700-H and CPP1000-H
Calibration technology Hydraulic hand test pump Models CPP700-H and CPP1000-H WIKA data sheet CT 91.07 for further approvals see page 2 Applications Simple test pressure generation on site, in the laboratory
More informationSTANDARD HIGH PRESSURE COMPRESSORS COMPACT PACKAGE FOR DEMANDING APPLICATIONS
STANDARD HIGH PRESSURE COMPRESSORS COMPACT PACKAGE FOR DEMANDING APPLICATIONS 2 STANDARD HIGH PRESSURE COMPRESSORS BURCKHARDT COMPRESSION GLOBAL TECHNOLOGY LEADER IN THE RECIPROCATING COMPRESSOR WORLD
More informationDIAPHRAGM PUMPS WITH KNF STABILIZATION SYSTEM
DIAPHRAGM PUMPS WITH KNF STABILIZATION SYSTEM DATA SHEET E 037 N 940.5 APE as AC version in IP 54 N 940.5 APE-W with multi-voltage power supply input (As an option adjustable with potentiometer or by external
More informationFixed Displacement Plug-In Motor A2FE
www.phphyds.com Series 6, axial tapered piston, bent axis design for mounting in mechanical gearboxes Sizes 28...355 Nom. Pressure up to 400 bar Peak Pressure up to 450 bar he fixed displacement plug-in
More informationTHE NEW SP SERIES MAXIMUM CAPACITY MINIMUM FOOTPRINT
THE NEW SP SERIES MAXIMUM CAPACITY MINIMUM FOOTPRINT SPORTS INDUSTRY & SAFETY 2 THE NEW SP SERIES BAUER KOMPRESSOREN BAUER KOMPRESSOREN THE NEW SP SERIES 3 JOINT INNOVATION THE CONCEPT BEHIND THE NEW SP
More informationCR Series. Special doors for clean room application
CR Series Special doors for clean room application The CR Series: Special doors for clean rooms An increasing number of defined standards require reliable special doors for clean room application, for
More informationE 328 E 498 Tank top mounting Connection up to G1½ / -24 SAE and SAE 2 Nominal flow rate up to 600 l/min / gpm
Return-Suction Filters E 8 E 98 Tank top mounting Connection up to G½ / - SE and SE Nominal flow rate up to 6 l/min / 8. gpm Description pplication For operation in units with hydrostatic drives, when
More informationGMC-I Service GmbH Calibration Center
2016 GMC-I Service GmbH Calibration Center DAkkS, ISO & Factorycalibration www.gmci-service.com From spare parts, reparation, rental service, maintenance of industrial health and safety standards, calibration
More informationIndustrial Compressor
Industrial Compressor KOMPRESSOREN RARE GASES Systems Fotos: Ralf Deichelmann HIGH PRESSURE INTEGRATED SYSTEM TECHNOLOGY CUSTOM-BUILT FOR SPECIFIC RARE GAS APPLICATIONS Modern industrial processes require
More informationSTAP. Differential pressure controller DN 15-50
Differential pressure controller 15-50 Pressurisation & Water Quality Balancing & Control Thermostatic Control ENGINEERING ADVANTAGE is a high-performing differential pressure controller that keeps the
More informationE 328 E 498 Tank top mounting Connection up to G1½ and SAE 2 Nominal flow rate up to 600 l/min
Return-Suction Filters E 8 E 98 Tank top mounting Connection up to G½ and SE Nominal flow rate up to 6 l/min Description pplication For operation in units with hydrostatic drives, when the return flow
More informationSpecialty gases in small cylinders. Combine flexibility and safety with lightweight portability. Specialty gases in small cylinders.
Specialty gases in small cylinders Combine flexibility and safety with lightweight portability. Specialty gases in small cylinders. 02 Specialty gases in small cylinders Our specialty gases guarantee precision.
More informationEnerVal. Technical data litre storage capacity. Buffer storage vessels
EnerVal Buffer storage vessels Technical data 200-10000 litre storage capacity Contents Title Page number EnerVal (200-2000) Description 3 Part No. 4 Technical data 6 Dimensions 7 EnerVal G (1000-10000)
More informationGas Pressure Regulator R 51
Gas Pressure Regulator R 51 Product Information Subject to technical modifications! Reprint prohibited! Table of Contents Application, Features, Technical Data 4 Application 4 Features 4 Type of model
More informationPOWER TRANSMISSION PARTS. Spare parts in-stock when you need them. Classical Timing Pulley & Belt Drives.
POWER TRNSMISSION PRTS Spare parts in-stock when you need them lassical Timing Pulley & elt Drives lassical Timing Pulley & elt Drives lassical timing belts offer a maintenance free and economical alternative
More informationbetter measurement Simply a question of SCHMIDT Flow Sensor SS The cost-effective alternative in pressurised systems up to 10 bars.
Simply a question of better measurement SCHMIDT Flow Sensor SS 20.261 The cost-effective alternative in pressurised systems up to 10 bars. Compressed air technology Industrial processes A cost analysis
More informationVariable Displacement Double Pump A20VO. Series 1, for open circuits Axial piston - swashplate design, Back to back - design
Brueninghaus Hydromatik Series 1, for open circuits Axial piston - swashplate design, Back to back - design RE 93100/02.97 Sizes 60...260 Nominal Pressure up to 350 bar Peak Pressure up to 400 bar Preliminary
More informationDICTATOR "DIREKT" Gate Closer
DICTATOR "DIREKT" Gate Closer For Access Gates in Boundary Fences The DICTATOR gate closer DIREKT is the economic solution for the reliable and controlled closing of outside gates, such as admission gates
More informationFixed Displacement Motor A4FM
Fixed Displacement Motor 4FM RE 91 12/4. replaces: 3.95 and RE 91 1 for open and closed circuits Sizes 22...5 Series 1, Series 3 Nominal pressure up to bar Peak pressure up to 45 bar Index Features 1 Ordering
More informationV MW. Exceptional performance and reliability at high-wind-speed sites. vestas.com
V90-3.0 MW Exceptional performance and reliability at high-wind-speed sites vestas.com We deliver on the promise of wind power SUPERIOR YIELD AT HIGH-WIND-SPEED SITES High standards for weight and performance
More informationOur Company. Sail with us into calm waters! -
Rudder Systems Our Company The company MM-Offshore GmbH is one of the major designing and producing ship s equipment supplier in the international shipbuilding market. With our experience of more than
More information2-Port Seat Valves with Flange, PN 16
4 45 2-Port Seat Valves with Flange, PN 6 VVF45... dular cast iron EN-GJS-400-5 valve body DN 50...50 k vs 9...00 m /h Can be equipped with SKB...- or SKC...- electrohydraulic actuators Use For use in
More informationGasMultiBloc Combined regulator and safety valve Infinitely variable air/ gas ratio control mode MBC-300-VEF MBC-700-VEF MBC-1200-VEF
GasMultiBloc Combined regulator and safety valve Infinitely variable air/ gas ratio control mode MBC-00-VEF 7.03 Max. operating pressure 30 mbar Compact design High flow values Low weight Low power consumption
More informationLiquid ring vacuum pumps in compact design
Liquid ring vacuum pumps in compact design LEM 26, LEM 51 Pressure range: Suction volume flow: 33 to 113 mbar 3 to 58 m³/h CONSTRUCTION TYPE SIHI liquid ring vacuum pumps are displacement pumps of uncomplicated
More informationMembrane dryers. Series airfit dry G1/2. with/without patented purge air regulation. Overview Description. Characteristics Dimensions
Overview Description Membrane fitting the airfit comfort series Page Characteristics Dimensions 146 10 11 13 14 Order instructions Type overview Membrane A4P006E-October 2007 14 Membrane Characteristics
More informationFixed Displacement Motor A4FM
Industrial Hydraulics Electric Drives and Controls Linear Motion and ssembly echnologies Pneumatics Service utomation Mobile Hydraulics Fixed Displacement Motor 4FM RE 91 12/4. replaces: 3.95 and RE 91
More informationHigh Pressure Tube Unions
High Pressure Tube Unions DILO. Sustainably tight. Made in Germany I am totally convinced by the high safety level even under extreme pressure. Christian Komm, Siemens AG, Power Generation DILO High pressure
More informationCondensing pressure regulator, type KVR Receiver pressure regulator, type NRD
MAKING MODERN LIVING POSSIBLE Data sheet Condensing pressure regulator, type KVR Receiver pressure regulator, type NRD Regulator system KVR and NRD is used to maintain a constant and sufficiently high
More information2-port seat valves PN25 with externally threaded connections
4 379 2-port seat valves PN25 with externally threaded connections VVG55.. Valve body bronze CC491K (Rg5) DN 15...25 (½...1 ") kvs 0.25...6.3 m3/h Stroke 5.5 mm Sets of ALG.. with threaded and ALS.. with
More informationValvex Valves for Mining Applications
Valvex Valves for Mining pplications roven technology The Electronic Drive Systems product group at Voith Turbo GmbH & Co. KG develops and produces explosion-proof Valvex solenoid valves and valve assemblies.
More informationLiquid ring compressor
Liquid ring compressor KLH 47005, KLH 47105 Compression pressures: Suction volume flow: 2 to 11 bar 56 to 65 m³/h CONSTRUCTION TYPE Sterling SIHI liquid ring compressors are displacement compressors of
More informationELECTRIC ACTUATORS for continuous underwater use
ELECTRIC ACTUATORS for continuous underwater use The SA multi-turn actuator for continuous underwater use by AUMA opens new applications for electric actuators for water supply, in hydropower plants and
More informationDICTATOR "DIREKT" Gate Closer
DICTATOR "DIREKT" Gate Closer For Access Gates in Boundary Fences The DICTATOR gate closer DIREKT is the economic solution for the controlled closing of outside gates, such as admission gates to kinder
More informationCHAIN DRIVE Introduction Merits and demerits of chain drives Merits Demerits
70 CHAIN DRIVE Introduction Chain is used to transmit motion from one shaft to another shaft with the help of sprockets. Chain drives maintain a positive speed ratio between driving and driven components,
More informationAir Amplifiers & SYSTEMS
Air Amplifiers & SYSTEMS We Accept VISA, MasterCard and American Express Air Amplifiers Point-of-Use Air Solutions Maximator air amplifiers are designed to boost plant air pressure or increase the supply
More informationExpansion Vessels for Potable Installations
4. Expansion Vessels for Potable Installations Domestic installations lose millions of litres of potable water due to expansion water leaking from the vent and expansion pipe. Flamco s Airfix diaphragm
More informationPressure regulator for water
Pressure regulator for water rass version with VGW and international drinking water approvals Stainless steel version with VGW approval Compact plastic version Manometer port at pressure output The water
More informationRadiator valves VDN1.. VEN1..
2 105 EN 215 Straight valves VDN1.. Angle valves VEN1.. ACVATIX TM Radiator valves VDN1.. VEN1.. DIN-norm, for 2-pipe heating systems Valve bodies made of brass, mat nickel-plated DN 10, DN 15 and DN 20
More informationFlow and check valves Logic valves series 551. Brochure
Flow and check valves Logic valves series 551 Brochure 2 Flow and check valves Logic valves series 551 3/2-directional valve, low pressure operated Qn = 2-120 l/min 3 3/2-directional valve, Qn = 120 l/min
More informationTechnology for Life. saver. The. A breath of fresh air when you need it most.
Technology for Life The A breath of fresh air when you need it most. PP Gives you room to breathe. Draeger has built its reputation upon supplying technically advanced products that are of the highest
More information2-Port Seat Valves with Flange, PN 16
4 40 2-Port Seat Valves with Flange, PN 6 VVF4... Grey cast iron EN-GJL-250 valve body DN 50...50 k vs 9...00 m /h Can be equipped with SQX- electromotoric or SKD...-, SKB...- or SKC...- electrohydraulic
More informationGAS SYSTEM HYDRA GS. The gas installation system that sets new standards. Witzenmann GmbH
GAS SYSTEM The gas installation system that sets new standards. Witzenmann GmbH Östliche Karl-Friedrich-Str. 134 75175 Pforzheim, Germany Phone +49 7231 581-0 Fax +49 7231 581-820 wi@witzenmann.com www.witzenmann.com
More informationInstruction Manual Contact Pressure Vacuum Gauge
MS10 Instruction Manual Contact Pressure Vacuum Gauge Table of Contents 1. Safety Instructions 2. Intended Applications 3. Product Description and Functions 4. Installation 5. Commissioning 6. Maintenance
More informationTubes Components Valves Units Engineering SO EVERYTHING KEEPS FLOWING. Safety valves Bunging valves Vacuum valves Tank dome fittings
SO EVERYTHING KEEPS FLOWING Safety valves Bunging valves Vacuum valves Tank dome fittings Reliable reaction at the right moment Safety components are part of our everyday life. Like anti-skid systems in
More informationOperating instructions - Translation of the original -
Operating instructions - Translation of the original - 3-way ball cock Type 403x KIESELMANN GmbH Paul-Kieselmann-Str.4-10 D - 75438 Knittlingen +49 (0) 7043 371-0 Fax: +49 (0) 7043 371-125 www.kieselmann.de
More informationInstallation and Maintenance Instruction Manual
Installation and Maintenance Instruction Manual Bourdon tube pressure gauge, model T5400, T5500 and T6500 for industrial application In the following configuration: ###T5400### bourdon tube pressure gauge
More informationTHE COMPACT LINE. Mobile power packs in convincing BAUER quality l/min 225 / 330 bar TOUGH RELIABLE WELL ESTABLISHED
THE COMPACT LINE Mobile power packs in convincing BAUER quality 100 140 l/min 225 / 330 bar TOUGH RELIABLE WELL ESTABLISHED COMPACT LINE mobile breathing air compressors for high demands Due to its legendary
More informationThe original. 6-way zone valve from Belimo.
The original. 6-way zone valve from Belimo. From customer requirement to customer benefits. Recognising needs and finding unconventional solutions that is what makes Belimo extraordinary. In 2008, we replaced
More informationZHM ST Series. Technical Datasheet. Gear Flow Meters for lubricating, non lubricating, abrasive and corrosive fluids
www.kem-kueppers.com Technical Datasheet ZHM ST Series Gear Flow Meters for lubricating, non lubricating, abrasive and corrosive fluids Certified zertifiziert according gemäß to DIN DIN EN EN ISO ISO 9001
More informationRadiation-based Overview Page 214 FIBERTRAC Page 216 SOLITRAC Page 218 MINITRAC Page 220 POINTRAC Page 222 WEIGHTRAC Page 224
Detectors Radiation-based Overview Page 214 FIBERTRAC Page 216 SOLITRAC Page 218 MINITRAC Page 220 POINTRAC Page 222 WEIGHTRAC Page 224 213 FIBERTRAC, SOLITRAC, MINITRAC, POINTRAC, WEIGHTRAC Radiation-based
More informationHydraulic Accumulators with Back-Up Nitrogen Bottles
Hydraulic Accumulators with Back-Up Nitrogen Bottles 1. GENERAL To complete the accumulator range, HYDAC provides a variety of useful accessory products. They guarantee correct installation and optimum
More informationComponents for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly.
Components preparation and pressure adjustment ABP Overview ABP is a component that enables boosting by s only up to twice primary pressure (.0MPa max.) in combination with using air tank but not using
More informationFlamco Airfix D-E. Installation and operating instructions. 1999, Flamco eps
Airfix D-E 6442.eps GB Installation and operating instructions 1999, Exclusion of liability All operation and maintenance related technical information, data and instructions contained in these installation
More informationOperating instructions - Translation of the original -
Operating instructions - Translation of the original - 5091 xxx 000-xxx Check valve (O-Ring - design) DN 10 - DN 100, DN 1inch - DN 4inch EPDM Male part - welding end (G-S) 23.2.12 KIESELMANN GmbH Paul-Kieselmann-Str.4-10
More information3-port seat valves with externally threaded connection, PN 16
4 463 Acvatix 3-port seat valves with externally threaded connection, PN 16 VXG41.. ronze CuSn5Zn5Pb2 valve body DN 15 50 k vs 1.6 40 m 3 /h Flat sealing connections with external thread G to ISO 228-1
More informationKOMPRESSOREN COMPRESSORS KAESER AIR SERVICE Our Services An Overview
KOMPRESSOREN Our Services An Overview Fully equipped 100% quality and service One of the key requirements for any compressed air application is maximum compressed air availability. This is achieved however
More informationOur Company. Sail with us into calm waters! -
Rudder Systems Our Company The company MM-Offshore GmbH is one of the major designing and producing ship s equipment supplier in the international shipbuilding market. With our experience of more than
More informationCentrifugal Gas Separator ZGA. Operating Manual. Dimensions, weights and other technical data are subject to changes.
Centrifugal Gas Separator ZGA Operating Manual Am Neuen Rheinhafen 4 - D-67346 Speyer Postfach 1709 - D-67327 Speyer Phone: +49 (6232) 657-0 Fax: +49 (6232) 657-505 Internet: http://www.burmt.de Email:
More informationdifferential pressure regulating valve - threaded
140-142 differential pressure regulating valve - threaded Introduction Differential pressure regulating valves (DPRV) maintain the differential pressure across a circuit or sub-branch at a set differential
More informationTechnical Datasheet ZHA Series Gear Flow Meters Aluminum Version with ball bearing for lubricating media
www.kem-kueppers.com Technical Datasheet ZHA Series Gear Flow Meters Aluminum Version with ball bearing for lubricating media Certified zertifiziert according gemäß to DIN DIN EN EN ISO ISO 9001 9001 2
More informationAirfix. Flamco. Flamco. Pressure expansion vessels for sanitary appliances and potable water systems AIRFIX A AIRFIX D AIRFIX D-E
AIRFIX EXPANSION VESSELS Flamco Airfix Pressure expansion vessels for sanitary appliances and potable water systems AIRFIX A AIRFIX AIRFIX -E Flamco Edition 2005 / EXP Flamco Flamco offers you a wide choice
More informationCrankcase pressure regulator, type KVL REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Crankcase pressure regulator, type KVL REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction.......................................................................................
More informationSandvik Jaw Crushers
Sandvik Jaw Crushers Excellent durability thanks to welded frame. Range including models for mobile applications. 2 The product of decades of experience At Sandvik we have over a century of experience
More informationRope application technology combined expertise PFEIFER SEIL- UND HEBETECHNIK GMBH
10/2017 SEIL- UND HEBETECHNIK GMBH Rope application technology combined expertise DR.-KARL-LENZ-STRASSE 66 DE-87700 MEMMINGEN PHONE +49 (0) 83 31-937-301 FAX +49 (0) 83 31-937-123 E-MAIL wirerope@pfeifer.de
More informationThese operating instructions apply to: PKL 190 PKL 2100 PKL 450 PKL 5000 PKL 740 PKL 10000
Assembly and Operating Instructions March 2014 for Netter Pneumatic Impactors BA No. 1468E Page 1/24 These operating instructions apply to: PKL 190 PKL 2100 PKL 450 PKL 5000 PKL 740 PKL 10000 Contents
More informationSeries 42 Self-operated Regulators Differential Pressure Regulators with Type 2424/Type 2428 Actuator (closing) Type Type 42-28
Series 42 Self-operated Regulators Differential Pressure Regulators with Type 2424/Type 2428 Actuator (closing) and balanced Type 2422 Valve Type 42-24 Type 42-28 Application Differential pressure regulators
More informationInstallation and Maintenance Instruction Manual
Installation and Maintenance Instruction Manual Differential pressure gauge, model F5503 and F5503-HP for industrial application in the following configuration: ###F5503### differential pressure gauge
More informationWorkshop Compressors CLASSIC Series
www.kaeser.com Workshop Compressors CLASSIC Series Displacement: 210 to 40 l/min Pressure: 10 bar What do you expect from your Classic workshop compressor? Quality results can be achieved only by using
More information