Datamate Specification. Pin Numbering. Mating Profiles. Materials. Mechanical. 3 Row 6.

Size: px

Start display at page:

Download "Datamate Specification. Pin Numbering. Mating Profiles. Materials. Mechanical. 3 Row 6."

Marsha Kelley
6 years ago
Views:

1 Datamate Specification Materials Mechanical Mouldings: Glass-filled thermoplastic UL94V-0 Female contacts: rass shell, with eryllium opper inner contact Male contacts: Phosphor bronze Finish: See individual pages Durability: 500 operations Insertion force (max): 1.0N Withdrawal force (min): 0.2N Signal crimp accommodation: 22 WG to 28 WG S 3G 210 Type or MIL-DTL-16878/6 Type ET Electrical Environmental DTMTE J-TEK urrent (individual contacts in isolation): 3.3 max (at 25 ) 2.6 max (at 85 ) ll contacts simultaneously: 3.0 max (at 25 ) 2.2 max (at 85 ) Working Voltage (at sea level 1013 mbar): 800V D or rms Proof Voltage (at sea level 1013 mbar): 1200V D or rms ontact resistance (initial): 20 mω max ontact resistance (after conditioning): 25 mω max Insulation resistance (initial): 1000 MΩ min Insulation resistance (after conditioning): 100 MΩ min Environmental classification: 55/125/56 days at 95% RH Operational temperature: -55º to +125º *Vibration sensitivity: 10Hz to 2000Hz, 0.75mm, 98m/s2 (10G), duration 6h *ump severity: 390m/s2 (40G), 4000 ±10 bumps *Shock severity: 981m/s2 (100G) for 6ms *cceleration severity: 490m/s2 (50G) * Tested with connectors with Jackscrews. Pin Numbering 3 Row ontact numbering is shown looking onto mating face of male connector. Mating Profiles FEMLE HM1398: M83 J-Tek ontact Orientation VERTIL P TIL MLE RIMP M83-LFTXxxNXX M83-LF1xxNXX VERTIL P TIL M83-LFD1xxNXX M83-LMTXxxNXX M83-LMTXxxNXX M83-LFTXxxNXX M83-LF1xxNXX 1 M83-LFD1xxNXX HORIZONTL P TIL M83-LMLXxxNXX ll dimensions in mm. 66 M83-LMLXxxNXX

Datamate onnectors Female Vertical P Tail alculation FEmale VERTIal + 15 +9 ø0.65 ø3.70 min min 3.

50 HM1286: M83-LFTXF2NXX-0000-000 /F Hex Socket M83 - LF T1 F2 N XX - 0000-000 JKSREW TIL T1 F2 3mm Tail ll dimensions in mm.

2 Datamate onnectors Female Vertical P Tail alculation FEmale VERTIal ø0.65 ø3.70 min min 3.00 Recommended P oard Pattern HM1287: M83-LFTXFXNXX ø 0.50 HM1286: M83-LFTXF2NXX /F Hex Socket M83 - LF T1 F2 N XX JKSREW TIL T1 F2 3mm Tail ll dimensions in mm. 67 Hex Socket Jackscrew Datamate J-TEK Low-force 4-finger eryllium opper contact clip. Fully shrouded contacts. Polarised mouldings. ll contacts are gold finish for full RoHS compliance. Mates with male connectors shown on pages 69 and 70.

M83 Datamate onnectors Female rimp DTMTE J-TEK Part numbers are for a kit of housing and contacts. Spare contacts are available. Low-force 4-finger eryllium opper contact clip.

45 Wire Size Part Number Small ore Ident Groove M83-0110005 22 WG M83-0130005 24-28 WG tools Recommended rimp Tool 2520/2-01 Positioner T5747 ontact Insertion/Removal Tool Z80-280 See pages 87 to 89

3 M83 Datamate onnectors Female rimp DTMTE J-TEK Part numbers are for a kit of housing and contacts. Spare contacts are available. Low-force 4-finger eryllium opper contact clip. Fully shrouded contacts, rear-insertable. rimp instruction sheets & video available online at. Mates with male connectors shown on pages 69 and 70. alculation FEmale RIMP SpRE ontacts Wire Size Part Number Small ore Ident Groove M WG M WG tools Recommended rimp Tool 2520/2-01 Positioner T5747 ontact Insertion/Removal Tool Z See pages 87 to 89 Instruction sheets available at /downloads/instructions Wire Stripping Details ø1.10 max nominal M83 - LF X1 F2 N XX JKSREW RIMPS 1 Small ore (24-28 WG) D1 Large ore (22 WG) F2 ll dimensions in mm. 68 Hex Socket Jackscrew

Datamate onnectors Male Vertical P Tail alculation male VERTIal + 15 +9 ø2.20 min ø0.

00 M83 - LM T1 N XX - 0000-000 JKSREW TIL T1 3mm Tail ll dimensions in mm.

4 Datamate onnectors Male Vertical P Tail alculation male VERTIal ø2.20 min ø0.65 min Recommended P oard Pattern Ø M83 - LM T1 N XX JKSREW TIL T1 3mm Tail ll dimensions in mm. 69 oard Mount Jackscrew Datamate J-TEK oard Mount nuts to be tightened to a maximum torque of 23cmN. Fully shrouded contacts. Polarised mouldings. ll contacts are gold finish for full RoHS compliance. Mates with female connectors shown on pages 67 and 68.

Datamate onnectors Male Horizontal P Tail oard Mount screws to be tightened to a

Fully shrouded contacts, polarised mouldings.

Mates with female connectors shown on pages 67 and 68.

5 Datamate onnectors Male Horizontal P Tail oard Mount screws to be tightened to a maximum torque of 23cmN. Suitable for motherboard/daughterboard configurations. Fully shrouded contacts, polarised mouldings. ll contacts are gold finish for full RoHS compliance. Mates with female connectors shown on pages 67 and 68. DTMTE J-TEK alculation male horizontal ø2.20 min ø0.65 min Recommended P oard Pattern M83 - LM L3 M7 N XX JKSREW TIL L3 M7 4mm Tail ll dimensions in mm. 70 Hex Socket oard Mount

COMPONENT SPECIFICATION M80-7XX SERIES CONNECTORS - THREE ROW

COMPONENT SPECIFICATION M80-7XX SERIES CONNECTORS - THREE ROW JUN 200 CONTENTS: SECTION TITLE PAGE Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings