CABLE CONNECTORS CABLE CONNECTORS

Size: px
Start display at page:

Download "CABLE CONNECTORS CABLE CONNECTORS"

Transcription

1 Terminal blocks Terminal blocks E-loks... 4 Multipolar terminal strips Protected distribution terminals E-Rail Preinsulated terminals Preinsulated copper terminals Preinsulated end-sleeve terminals... 5 Twin insulated terminals Insulated terminals assortment in box opper terminals... 5 Insulated crimping terminals Rings Pin terminals Forks utt connectors... 0 End connectors... 0 Nylon rapid connectors... 0 Push-on terminals... Heat shrinkable butt connectors... 3 opper lugs opper lugs... 4 utt copper tube terminals...

2 TERMIN OKS // TERMIN OKS E-OKS Unipolar terminal blocks in transparent polycarbonate, ideal for the connection of cables in civil and industrial installations. TEHNI DT Material of insulating body: transparent polycarbonate. Internal pieces and bases of polyamide. Material of inserts: brass. Material of screws: zinc-plated steel. Working temperature: Heat resistance: 30. Flammability rating: U94 class V. PPROVS/ERTIFITIONS ccording to the norm: EN 0998-:004. EN :004. EN :004. PPITIONS onnection and insulation of cables in civil and industrial installations. ENEFITS Easy separation of the pieces without rests of material on the external surface of the product. Optimal and safe connection thanks to the increased size of the insulating body of the terminal block and screws. 4 - Elematic abling Systems

3 D Unipolar terminal blocks - hole ode Nominal (mm²) ES 5,5 0 ES 5,5 0 ES ES 0 0 ES ES 0 5 ES 50 5 ES N Poles onnectable cables (mm),5,5,5 4, POES 5 POES POE Rated voltage Degree of protection Dimensions (mm) Pack arton rigid N. flexible N. V D pcs. pcs IP , IP IP0 0 4, IP IP , IP , IP IP D Unipolar terminal blocks - holes ode Nominal (mm²) ES /5,5 ES /0 ES /0 ES /50 5 ES / N Holes onnectable cables (mm),5 0,75 4, Rated voltage Degree of protection Dimensions (mm) Pack arton rigid N. flexible N. V D pcs. pcs The ES /50 and ES /350 terminal blocks are suitable for installations on mounting rail DIN EN 500 with art. ES IP0 5 3, IP IP IP , IP , Elematic abling Systems - 47

4 D Unipolar terminal blocks - 3 holes ode Nominal (mm²) ES 3/0 3 ES 3/0 3 ES 3/ N Holes onnectable cables (mm) 4, Rated voltage Degree of protection ll the terminal blocks are suitable for installations on mounting rail DIN EN 500 with art. ES 500 Dimensions (mm) Pack arton rigid N. flexible N. V D pcs. pcs IP , IP IP , D Unipolar terminal blocks - 5 holes ode Nominal (mm²) ES 5/0 5 ES 5/0 5 ES 5/ N Holes onnectable cables (mm) 4, Rated voltage Degree of protection ll the terminal blocks are suitable for installations on mounting rail DIN EN 500 with art. ES 500 Dimensions (mm) Pack arton rigid N. flexible N. V D pcs. pcs IP , IP IP , Support for mounting rail DIN ode Description Pack arton pcs. pcs. ES 500 Support for the installation of unipolar terminal blocks -3-5 holes on mounting rail DIN EN Elematic abling Systems

5 TERMIN OKS // MUTIPOR TERMIN STRIPS Multipolar terminal strips with screw, in polyethylene or in neutral polyamide, tested for working temperatures till 0. TEHNI DT Material of insulating body: Material of inserts: Material of screws: Working temperature: Flammability rating: U94 class V. Halogen-free. neutral polyethylene (line PE). Neutral polyamide (line P). brass (line PE). Nickel-plated brass (line P). zinc-plated steel (line PE); (line P); max short period 50 (line P). PPITIONS onnection and insulation of cables in civil and industrial installations. ENEFITS Joints of cables. PPROVS/ERTIFITIONS ccording to the norm: EN :004 (line PE). EN :004; EN :00 (line P). F Multipolar terminal strips in neutral polyethylene - line PE ode Nominal N Poles Flexible/Rigid connectable cables Rated voltage Nominal current Degree of protection Dimensions (mm) Pack arton (mm²) (mm²) (V) () D ØE ØF Screw pcs. pcs. EMPP5,5,5/ IP0 93,5 8,8,5 M, EMPP40 4 4/ IP0 9,5 0 3, 3 M EMPP0 / IP ,3 3, M3, EMPP00 0 0/ IP ,8 4 M EMPP0 / IP M5 0 0 Multipolar terminal strips in neutral polyamide - line P ode Nominal N Poles Flexible/Rigid connectable cables Rated voltage Nominal current Degree of protection Dimensions (mm) Pack arton (mm²) (mm²) (V) () D ØE ØF Screw pcs. pcs. EMP 5,5, ,5 IP0 94, ,8 M EMP 5,5, IP , 3, M EMP IP ,3 M3,5 0 0 EMP IP ,4 M4 0 0 EMP IP ,5 3,4 M Elematic abling Systems - 49

6 TERMIN OKS // PROTETED DISTRIUTION TERMINS E-RI Protected distribution terminal posts. TEHNI DT Insulation support: Inserts: Screws: Working temperature: Heat resistance: Fixing: cover of polycarbonate. ase of Polyamide. Self-extinguishing U94 V. brass. zinc-plated steel on rail DIN EN 500 or with screws on plate. PPITIONS onnection and insulation of cables in civil and industrial installations. ENEFITS Possibility to connect more cables into the same polo. PPROVS/ERTIFITIONS ccording to the norm: EN :004 (00 and 5). EN 0998-:004 (00 and 5). Protected blue distribution terminal post - 50 ode I pk I cc I cw U imp V n N Poles k k k kv V RI 05007, RI 050, RI 0505, N Holes Ø (mm) ar onn. (mm²) 5 5,3 0 (rigid ) 9 5,3 0 (rigid ),5 3 5,3 0 (rigid ) onn. cables n. Dissipated power per bar (W) Dimensions (mm) Pack arton 5 85 pcs. pcs. 0,53 0, ,83 0, ,, Note: the protected distribution terminal post-50 can be used as expansion of the distribution terminal post-00 and 5 - four poles Elematic abling Systems

7 Protected distribution terminal post - 00 (two poles and four poles) ode I pk I cc I cw U imp V n N Poles ar Dissipated power per bar (W) Dimensions (mm) Pack arton k k k kv V N Holes Ø (mm) onn. (mm²) onn. cables n pcs. pcs. RI , RI , /5/35 0//5,5 4//0 0 /5/35 0//5,5 4//0,3, ,3, Note: these products can be fixed on rail DIN EN 500 or with screws on plate. Protected distribution terminal post - 5 (two poles and four poles) ode I pk I cc I cw U imp V n N Poles ar Dissipated power per bar (W) Dimensions (mm) Pack arton k k k kv V N Holes Ø (mm) onn. (mm²) onn. cables n pcs. pcs. RI 5 4, RI 54 4, RI 55 4, RI 545 4, /5/35 0//5,5 4//0 0 /5/35 0//5,5 4//0 0 /5/35 0//5,5 4//0 0 /5/35 0//5,5 4//0 4, 4, , 4, ,7, ,7, Note: these products can be fixed on rail DIN EN 500 or with screws on plate. Elematic abling Systems - 5

8 TERMINS // PREINSUTED // PREINSUTED OPPER TERMINS The preinsulated copper terminals create a perfect base of contact for the insertion of the cables into blocks, using a limited space. TEHNI DT onnector material: electrolytic tinned copper (purity grade 99,9%). Insulation material: polypropylene. Self-extinguishing U94 V Halogen-free. Working temperature: Installation temperature: 0 0. Max admissible point: 0 for short periods. Resistance to external agents: good resistance to bases and weak acids. imited resistance to strong oxidant acids, oils and minerals. No resistance to chloride solvents. PPITIONS Electrical wiring and connections in electric and electronics switchboards. ENEFITS High conductivity of the raw material. vailable in three colours: T, W and D. vailable in cutting strips 50 pcs. in the sect. 0,5-0,75 -,0 -,5 -,5 mm. PPROVS/ERTIFITIONS ccording, for colour and dimension, to the norm DIN 48/4. ertification S nr Preinsulated end-sleeve terminals - 50 pcs - cutting strips T (mm²) WG D S D S pcs. E0 0,50/N ,5, 0,5 500 E05 0,75/N 8 4 8, 0,5,8 0,5 500 E09,00/N 8 4 8,4 0,5 3 0,5 500 E3,50/N 4 8,7 0,5 3,5 0,5 500 E,50/N 4 4 8, 0,5 4, 0,5 500 Tool for crimping end-sleeve terminals in strips, see cabling tools. INKED PRODUTS: Tools for terminals, see pages Elematic abling Systems

9 D D S S Preinsulated copper terminals - col. T/W/D ode ode T W D (mm²) WG D S D S pcs. E034 E34 0,5/N 4 0 0,75 0,5,8 0,5 500 E034 0,5/N 4 0 0,75 0,5,8 0,5 00 E035 E35 0,5/ 4 8 0,75 0,5,8 0,5 500 E03 E3 0,34/N 0 0,8 0,5 0,5 500 E03 0,34/N 0 0,8 0,5 0,5 00 E037 E37 0,34/ 8 0,8 0,5 0,5 500 E0 E00 E0 0,50/K 0 0,5, 0,5 500 E0 E00 E0 0,50/N ,5, 0,5 500 E0 0,50/N ,5, 0,5 00 E03 E030 E03 0,50/H 0 0 0,5, 0,5 500 E04 E040 E004D 0,75/K 8, 0,5,8 0,5 500 E05 E050 E005D 0,75/N 8 4 8, 0,5,8 0,5 500 E05 0,75/N 8 4 8, 0,5,8 0,5 00 E0 E00 E00D 0,75/H 8 0, 0,5,8 0,5 500 E07 E070 0,75/ 8 8, 0,5,8 0,5 500 E08 E080 E08,00/K 8,4 0,5 3 0,5 500 E09 E090 E09,00/N 8 4 8,4 0,5 3 0,5 500 E09,00/N 8 4 8,4 0,5 3 0,5 00 E0 E00 E0,00/H 8 0,4 0,5 3 0,5 500 E E0 E,00/ 8 8,4 0,5 3 0,5 500 E3 E3 E3,50/N 4 8,7 0,5 3,5 0,5 500 E3,50/N 4 8,7 0,5 3,5 0,5 00 E4 E4 E4,50/H 0,7 0,5 3,5 0,5 500 E5 E5 E5,50/ 4 8,7 0,5 3,5 0,5 500 E E E,50/N 4 4 8, 0,5 4, 0,5 500 E,50/N 4 4 8, 0,5 4, 0,5 00 E7 E7 E7,50/H 4 8, 0,5 4, 0,5 500 E8 E8 E8,50/ 4 4 8, 0,5 4, 0,5 500 E9 E9 E9 4,00/N,5 0,8 0, 4,8 0,3 500 E9 4,00/N,5 0,8 0, 4,8 0,3 00 E0 E0 E0 4,00/H 9,5,8 0, 4,8 0,3 500 E E E 4,00/ 5,5 8,8 0, 4,8 0,3 500 E E E0D,00/N 0 0 3,5 0,,3 0,3 00 E3 E3 E03D,00/ 0 8 3,5 0,,3 0,3 00 E4 E4 E04D 0,00/N 8 4,5 0, 7, 0,4 00 E5 E5 E05D 0,00/ ,5 0, 7, 0,4 00 E E E0D,00/N 4 5,8 0, 8,8 0,4 00 E7 E7 E07D,00/ 8 8 5,8 0, 8,8 0,4 00 E8 E8 E08D 5,00/N ,3 0,, 0,4 50 E9 E9 E09D 5,00/ 4 3 7,3 0,, 0,4 50 E30 E30 E30 35,00/N 30 8,3 0,,7 0,4 50 E3 E3 E3 35,00/ ,3 0,,7 0,4 50 E3 E3 E3 50,00/N 3 0 0,3 0,3 5 0,5 50 E33 50,00/ ,3 0,3 5 0,5 50 Ferrule length: Short=K - Normal=N - Medium=H - ong = Elematic abling Systems - 53

10 TERMINS // PREINSUTED // TWIN INSUTED TERMINS Insertion of two cables into the same terminal. TEHNI DT onnector material: electrolytic tinned copper (purity grade 99,9%). Insulation material: polypropylene. Self-extinguishing U94 V Halogen-free. Working temperature: Installation temperature: 0 0. Max admissible point: 0 for short periods. Resistance to external agents: good resistance to bases and weak acids. imited resistance to strong oxidant acids, oils and minerals. Not resistant to chloride solvents. PPITIONS Electrical wiring and connections in electric and electronics switchboards. ENEFITS High conductivity of the raw material. Minimal operational space of the terminals in the block. llows the insertion of two cables into the same terminal. PPROVS/ERTIFITIONS ccording, for colour and dimension, to the norm DIN 48/4. ertification S nr TWIN insulated terminals D ode T T D D (mm²) D D D3 S S pcs. D S S D x0,50/n,4,5 4, ,5 0, T x0,75/n,7, ,5 0, T 0300 x0,75/h,7, ,5 0, x,00/n,95 3,4 5, ,5 0, x,00/h,95 3,4 5, ,5 0, x,50/n, 3,, 8 0,5 0, x,50/h, 3,, 0 0,5 0, T 030 x,50/n,8 4, 7,8 8,5 0 0, 0, T 0307 x,50/h,8 4, 7,8,5 3 0, 0, T 0309 x4,00/n 3,7 4,9 8,8 3 0, 0, T 030 x,00/n 4,8, , 0, T 0304 x0,0/n,4 7, 3 4 0, 0, T 030 x,0/n 8, 9, 8, , 0,4 50 * The codes are available in 00 pcs bag, adding "" after the cod. Ferrule length: Normal=N - Medium=H INKED PRODUTS: Tools for terminals, see pages Elematic abling Systems

11 TERMINS // PREINSUTED // INSUTED TERMINS SSORTMENT IN OX Insulated terminals assortment in box, in many dimensions and colours. ox dimensions: diameter = 90mm; h = 45mm. PPROVS/ERTIFITIONS ccording, for colour and dimension, to the norm DIN 48/4. ertification S nr PPITIONS Electrical wiring and connections in electric and electronics switchboards. ENEFITS The assortment of different sizes and colours allows you to find the suitable terminal for the wished installation. The practical box in PV is provided with separations for the easiest choice of the wished product. Preinsulated copper terminals cross- 0,5,5 mm² ode ode ode Section Pack T W D (mm²) pcs. 0,5 50 0, ,5 00,5 50 Preinsulated copper terminals cross- 4 mm² ode ode ode Section Pack T W D (mm²) pcs Twin insulated terminals 0,75,5 mm² ode ode ode Section Pack T W D (mm²) pcs. x 0, x 50 x,5 50 x,5 50 Twin insulated terminals 4 mm² ode ode ode Section Pack T W D (mm²) pcs. x x 0 x0 0 x 5 Elematic abling Systems - 55

12 TERMINS // PREINSUTED // OPPER TERMINS The copper terminals create a perfect base of contact for the insertion of the cables into blocks, using a limited space. TEHNI DT onnector material: electrolytic tinned copper (purity grade 99,9%). PPROVS/ERTIFITIONS ccording to the norm: DIN 48/. PPITIONS Electrical wiring and connections in electric and electronics switchboards. ENEFITS The copper terminals create a perfect base of contact for the insertion of the cables into blocks. S D D OPPER terminals (mm²) WG D D S pcs , , 0,8 0, ,5 0 5,3, 0, , ,3, 0, ,75 8 5,3,,3 0, , ,3,,3 0, ,3,4,5 0, ,3,4,5 0, ,5 7,7,8 0, ,5 0 9,7,8 0, , , 3,4 0, , , 3,4 0, ,8 4 0, ,8 4 0, ,5 4,7 0, ,5 4,7 0, ,8 4,5 5,8 0, ,8 4,5 5,8 0, ,8 4,5 5,8 0, ,5 5,8 7,5 0, ,5 5,8 7,5 0, ,5 5,8 7,5 0, ,3 9,5 0, ,3 9,5 0, ,3 0, ,3 3 0,3 50 0,5 mm² cross not belonging to the norm DIN 48/ INKED PRODUTS: Tools for terminals, see pages Elematic abling Systems

13 TERMINS // INSUTED RIMPING TERMINS // INSUTED RIMPING TERMINS The insulated terminals are obtained by plates of copper undergoing a process of hot treatment and electrolytic tin plating. This process optimizes the maximum malleability of the material providing the easiest compression during the crimping operations. vailable with nylon insulation (Easy Entry system) e in PV (anti-vibration sleeve). PPITIONS The insulated crimping terminals are used for electrical connections. TEHNI DT onnector material: electrolytic tinned copper (purity grade 99,9%) obtained by plates of copper, undergoing a process of hot-treatment and of electrolytic tin plating. Insulation material: nylon (ESY ENTRY) for rings, forks, pins and end connectors. PV for butt connectors and piggy-backs Self-extinguishing U94 V Working temperature: nylon: up to 05. PV: up to 75. Halogen-free. ENEFITS The particular internal shape of the insulation (Easy Entry) enables the quickest and safest insertion of the cables. The internal anti-vibration sleeve (PV insulation) avoids the tear as well as the unthreading of the cable even in presence of particular vibrations. PPROVS/ERTIFITIONS ertifications: U file n E3449 and E INKED PRODUTS: Tools for terminals, pages 98 Elematic abling Systems - 57

14 RING TERMINS in nylon D a a D D3 (mm²) WG D D D3 a a pcs ,5,5 4, 3, ,5,5 4, 3, ,5,5 4, 4, ,5,5 4, 5, ,5,5 4,, ,5,5 4, 8, ,5,5 4, 0, ,5,5 4 4,8 3, ,5,5 4 4,8 3, ,5,5 4 4,8 4, ,5,5 4 4,8 5, ,5,5 4 4,8, ,5,5 4 4,8 8, ,5,5 4 4,8 0, ,5,5 4 4, ,4 4, ,4 5, ,4, ,4 8, ,4 0, , The code 0 is not U certified D a a D3 D PIN TERMINS in nylon (mm²) WG D D D3 a a pcs. 0 0,5,5 4,, ,5,5 4,, ,5,5 4 4,8, ,5,5 4 4,8, ,4, Elematic abling Systems

15 D a a D3 D DE TERMINS in nylon (mm²) WG D D D3 a a pcs ,5,5 4,, ,5,5 4,, 0 0, ,5,5 4,, ,5,5 4, 3 4 4, ,5,5 4,, 8 8, ,5,5 4 4,8, ,5,5 4 4,8, 0 0, ,5,5 4 4,8, ,5,5 4 4,8, 8 8, ,4, D D3 FORK TERMINS in nylon D a a (mm²) WG D D D3 a a pcs. 03 0,5,5 4, 3, ,5,5 4, 3, ,5,5 4, 4,3, ,5,5 4, 5, ,5,5 4,, ,5,5 4 4,8 3, ,5,5 4 4,8 3,7, ,5,5 4 4,8 4,3, ,5,5 4 4,8 5, ,5,5 4 4,8, ,4 4, ,4 5, ,4, ,4 8, ,4 0, D D3 FNGED FORKS terminals in nylon (mm²) WG D D D3 a a pcs. D a a 073 0,5,5 4, 3,7 7,3 5, ,5,5 4 4,4 4,3 8 7, Elematic abling Systems - 59

16 d F UTT ONNETOR in PV (mm²) WG d F pcs ,5, ,5, , ,4 00 END ONNETORS in nylon (mm²) WG D d pcs. D d EDE- 0,5,5 7,8,5,4 8, 5 00 EDE-,5,5 4 9,3 3,3 3,5 0, 5,5 00 EDE-5 4 0,8 4,4 5,5 5, EDE ,9 5,,5 7, RPID ONNETORS (polypropylene) (mm²) WG pcs. ESR 0,5,5 7,7,7 9,7 00 ES,5,5 4 7,7,7 9,7 00 ESG 4 0 9,8 3,9, Elematic abling Systems

17 D a a FEME PUSH-ON TERMINS in PV (mm²) WG D a a pcs. 38 0,5,5 4, 3, 0,5,4 8, ,5,5 4, 3, 0,8,4 8, ,5,5 4, 5 0, ,5,5 4, 5 0, ,5,5 4,, 0,8 7,9 0, E ,5,5 4 4,8 3, 0,5,4 8, ,5,5 4 4,8 5 0, ,5,5 4 4,8 5 0, ,5,5 4 4,8, 0,8 7,9 0, ,4, 0,8 7,9 4, The codes are U certified ME PUSH-ON TERMINS in PV D a a (mm²) WG D a a pcs ,5,5 4,,8 0,5, ,5,5 4, 4,8 0, ,5,5 4,,3 0, ,5,5 4 4,8 4,8 0,8 7 9, ,5,5 4 4,8,3 0, E ,4,3 0, The codes are U certified E PIGGY-KS in PV D F a a (mm²) WG D E F a a pcs ,5,5 4,, 0,8 7,9,3 8 0, ,5,5 4 4,8, 0,8 7,9,3 8 0, ,4, 0,8 7,9,3 8 4,8 00 Elematic abling Systems -

18 TOTY INSUTED FEME PUSH-ON TERMINS in PV D a a (mm²) WG D a a pcs ,5,5 4, 3, 0,5, ,5,5 4, 3, 0,8, ,5,5 4, 5 0,5,4, ,5,5 4, 5 0,8,4, ,5,5 4,, 0,8 7,9 3, ,5,5 4 4,8 5 0,5,4, E ,5,5 4 4,8 5 0,8,4, ,5,5 4 4,8, 0,8 7,9 3, ,4, 0,8 7, The code 3543 is not U certified D a a TOTY INSUTED ME PUSH-ON TERMINS in nylon (mm²) WG D a a pcs. 33 0,5,5 4,3 0,8 8 3, ,5,5 4 4,5,3 0,8 8 3, ,5,3 0,8 8,5 00 ME UETS in PV (mm²) WG D a a pcs. D a a ,5, ,5 0, ,5,5 4 4,5 4 8,5 0, ,5 5 8,5 4, FEME SOKETS in PV (mm²) WG D a a pcs. D a a 448 0,5, ,5 4, ,5,5 4 4,5 4 8, ,5 5 8,5 5, Elematic abling Systems

19 TERMINS // INSUTED RIMPING TERMINS // HET SHRINKE UTT ONNETOR The butt connectors are made of a tinned copper tube covered by a heat shrinkable tube with a special adhesive inside. The polymer used for the insulation is suitable to be crimped with the dedicated tool. TEHNI DT onnector material: electrolytic tinned copper (purity grade 99,9%). Insulation material: cross-linked polyolefin. Shrinking temperature: 00 Working temperature: Dielectric strength: 30 kv/mm. PPITIONS The butt connectors are covered by a heat shrinkable tube with a special adhesive inside granting a perfect sealing. ENEFITS The internal adhesive insulation provides an effective sealing of the electrical connection. D S HET SHRINKE UTT ONNETOR (mm²) WG D S pcs. 40 0,5, ,4 0, ,5, ,8 0, , 0,57 00 INKED PRODUTS: Tools for terminals, pages 98 Elematic abling Systems - 3

20 TERMINS // OPPER UGS // OPPER UGS The copper lugs are obtained from pure electrolytic copper tube (99,9%) with high conductivity; they are provided with an hole for the inspection of the conductor. Every lug is marked with the of the wire and with the screw diameter. TEHNI DT onnector material: electrolytic tinned copper (purity grade 99,9%). Tin coating thickness: 4µm. PPROVS/ERTIFITIONS ccording to the norm: IE 38-:993. PPITIONS Electrical wiring in electric and electronics switchboards. ENEFITS The hot treatment grants the best crimping operation. The particular countersinking grants the easiest insertion of the wire. The process of electrolytic tin plating ensures the best protection against oxidation. INKED PRODUTS: Tools for copper lugs, see pages Elematic abling Systems

21 TERMINS // OPPER UGS // OPPER UGS OPPER UGS,5 300 mm² D3 D4 H D D ode Section Ø Screw Dimensions (mm) Pack arton (mm²) (mm) D D D3 D4 H pcs. pcs ,5 5 4,4 8,7 5, ,4 0, ,5 4 4,3,7 8,7 4, ,3,7 8,7 5, ,3,7 0,3, ,8 3, 8,7 5,3 0 8, ,8 3, 0,3,4 8 3, ,8 3,,5 8, , ,5 3,8 0,3 5, ,5 3,8 0,3, ,5 3,8 3,9 8, ,9 4,7,9 5,3,5 0 7, ,9 4,7,9,4,5 0 7, ,9 4,7 3,5 8,3 5,5 0 30, ,9 4,7 5 0,5 5,5 0 30, ,8 5,,9 5,3 7, ,8 5,,9,4 7, ,8 5, 3,5 8,3 5, ,8 5, 0, ,8 5, ,5 7, 3,5, ,5 7, 3,5 8, ,5 7, 0, ,5 7, , 5,7, , 5,7 8, , 5,7 0, , ,5 9,5 7,9, ,5 9,5 7,9 8, ,5 9,5 7,9 0, ,5 9,5 7, ,5 9,5 4, ,5 9,5 5, ,5,5 8, ,5,5 0, ,5, ,5,5 4, ,5,5, ,5 4,7 8, ,5 4,7 0, ,5 4, ,5 4,7 4, ,5 4,7, , 8,9 8, , 8,9 0, , 8, , 8,9 4, , 8,9, ,5 30,4 0, ,5 30, ,5 30,4 4, ,5 30,4, Elematic abling Systems - 5

22 OPPER UGS,5 300 mm² D3 D4 H D D ode Section Ø Screw Dimensions (mm) Pack arton (mm²) (mm) D D D3 D4 H pcs. pcs , 8, , 8,4 34 4, , 8,4 34, , 8, ,4, 38,4 3 38, ,4, 38,4 4,5 38, ,4, 38,4,5 38, ,4, 38,4 38, , 3,4 4,7,5 4, D D D3 OPPER PIN TERMINS 50 mm² arton (mm²) D D D3 pcs. pcs ,8 3, 3, 5, , 4, 4,8 4,3, , 3 5, , ,8 43,4 8, 7 0, , 50,5 9,5 8, D D UTT OPPER TUE TERMINS 300 mm² ode Section Dimensions (mm) Pack arton (mm²) (mm) D D pcs. pcs ,5 3,5 5, ,5, ,5 5,5 7, ,5 7 9, ,5 8, , ,5, ,5 3, ,5 5 9, ,5, , ,5 7, ,5 3,5 30, Elematic abling Systems

Small packagings with 100 pcs./bag are available at additional costs! colour of insulation. colour of insulation. cross section mm 2.

Small packagings with 100 pcs./bag are available at additional costs! colour of insulation. colour of insulation. cross section mm 2. Insulated cord-end-sleeves 0.14 2.5 * = DIN 46 22 part 4 material: Cu-DHP according to DIN EN 12449, : polypropylene Small packagings with 100 pcs./bag are available at additional costs! 9 length mm (l2)

More information

Primary Terminals & Connectors

Primary Terminals & Connectors Primary & Pure electrolytic copper with electro-tin plating for corrosion resistance Deep internal serrations promote firm wire grip for maximum strength Insulation (where applicable) is color coded to

More information

Thin pressure gauge. G401-W Series. Symbol Descriptions. A Connection A A. B Pressure display [MPa] P04 0 to 0.4MPa P10 0 to 1.

Thin pressure gauge. G401-W Series. Symbol Descriptions. A Connection A A. B Pressure display [MPa] P04 0 to 0.4MPa P10 0 to 1. Thin pressure gauge G401-W Series Thin, compact design ideal for incorporating devices. Suitable for filter regulator, regulator, and pressure switch (P4000-W). onnection: O ring seal, set screw G401-W

More information

Plok. Rapid Mating Multi-Pin Industrial Connector. Amphenol Industrial Sine Systems * Pyle Connectors Corporation

Plok. Rapid Mating Multi-Pin Industrial Connector. Amphenol Industrial Sine Systems * Pyle Connectors Corporation - Plok Rapid Mating Multi-Pin Industrial onnector mphenol Industrial Sine Systems * Pyle onnectors orporation eatures and enefits Rapid mate spring loaded, push to mate, pull to unmate coupling system

More information

PANDUIT Copper Compression Metric Lugs and Splices

PANDUIT Copper Compression Metric Lugs and Splices Compression etric ugs and Splices Optimum reliability and safety With etric s Worldwide availability RoHS compliant Class 2R rigid stranded conductor sizes 4mm 2 630mm 2 Key Features and enefits Two-Hole

More information

Technical Datasheet. Rigid & Retractable Pendants. Rigid Pendant

Technical Datasheet. Rigid & Retractable Pendants. Rigid Pendant Rigid & Retractable Pendants Rigid Pendant Description Rigid pendants are intended for use operating theatres, anaesthetic rooms and similar medical locations. They are an ergonomic solution for the provision

More information

Cable entries. Contents. Cable entries. Cable entries Introduction L.2 L.1. Standard cable glands - Plastic L.5. Standard cable glands - Brass L.

Cable entries. Contents. Cable entries. Cable entries Introduction L.2 L.1. Standard cable glands - Plastic L.5. Standard cable glands - Brass L. Contents Introduction.2 Standard cable glands - Plastic.5 Standard cable glands - Brass.7 EMC cable glands.14 Standard cable glands - Stainless steel.16 Cable glands for Ex applications - Brass.17 Adaptors.18

More information

Ex-proof solenoid valves with spool position monitor on/off, with inductive proximity sensor - Multicertification ATEX, IECEx, EAC

Ex-proof solenoid valves with spool position monitor on/off, with inductive proximity sensor - Multicertification ATEX, IECEx, EAC www.atos.com Table -2/E Ex-proof solenoid valves with spool position monitor on/off, with inductive proximity sensor - Multicertification TEX, IEEx, E valve body spool ex-proof solenoid ex-proof inductive

More information

POWR-BLOKS Distribution/Splicer Blocks and Covers

POWR-BLOKS Distribution/Splicer Blocks and Covers SPECIFICATIONS Voltage : 600V erage: Based on NEC Table 310-16, using 75 C copper wire Material: Phenolic rated at 150 C and Thermoplastic rated at 125 C (LD1400 and LS1300 series only) : Standard: Highly

More information

3M Telecommunications Solutions for Networks. Quante QSA (= LSA plus) System Catalogue. Innovation

3M Telecommunications Solutions for Networks. Quante QSA (= LSA plus) System Catalogue. Innovation 3M Telecommunications Solutions for Networks Quante QSA (= LSA plus) System Catalogue Innovation IDC Modules Overview 3M Quante Cross Connect System QSA QSA Series 1 Connection modules for screw fixing

More information

PLIO Mouldings in flexible PVC

PLIO Mouldings in flexible PVC PLIO Mouldings in flexible PVC Flexible PVC has long been known as one of the most economical and useful thermoplastic materials, particularly within the electrical industry. Injection moulded parts in

More information

38999 Space grade ESA/SCC Section. MIL-DTL Space Grade Circular Connectors

38999 Space grade ESA/SCC Section. MIL-DTL Space Grade Circular Connectors 38999 Space grade ESA/SCC 3401 Section II MI-DT 38999 Space Grade Circular Connectors 59 38999 Space Grade ESA/SCC 3401 Contents 38999 Space Grade ESA/SCC 3401 SCC Specification.......................................................61

More information

SERIES A24 RAISED RIB

SERIES A24 RAISED RIB SERIES A24 RAISED RIB Eurobelt Series A24 Raised Rib conveyor belt has been designed mainly to be used with finger plates. It has ribs that, sticking out 6 mm above the module, provide a greater resistance

More information

Outer contact 1.0 milliohm max.

Outer contact 1.0 milliohm max. MCX.4 11/27/01 5:17 PM Page 17 Connex MCX Series connectors are ideal for applications and designs where weight and space savings are critical. This series has a 50 ohm impedance structure which operates

More information

Push-in fittings NPQH

Push-in fittings NPQH Key features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard

More information

ibridge and ibridge Ultra

ibridge and ibridge Ultra 2.00 mm Board to Cable Connectors ED. 06 10.2016 Catalog EA IB001 erni.com erni.cn TABLE OF CONTENTS OVERVIEW General 03 Technical Details 04 Features 05 Electrical and Mechanical Characteristics 10 Ordering

More information

Pneumatic valve islands

Pneumatic valve islands Pneumatic valve islands The MEGA solenoid air operated spool valve JOUCOMATIC offers a concept of solenoid air operated spool valves which can be fitted together to form islands. Due to its new patented

More information

Mouldings in flexible PVC

Mouldings in flexible PVC A22 Mouldings in flexible PVC PLIO Mouldings in flexible PVC Flexible PVC has long been known as one of the most economical and useful thermoplastic materials, particularly within the electrical industry.

More information

RECTANGULAR CONNECTORS

RECTANGULAR CONNECTORS RETNGULR ONNETORS FN360 Series FN-365P FN-365J FN-364P FN-364P FN-364J FN-364J FN-365P FN-365J FN-364P FN-364J FN-362J FN-363J FN-365P FN-367J FN-365P FN-364P FN-361P With type cover FN-365J FN-364P With

More information

G1/8 G1/8. Model 0 bar -0,1 bar -0,2 bar -0,3 bar -0,4 bar -0,5 bar -0,6 bar -0,7 bar -0,8 bar

G1/8 G1/8. Model 0 bar -0,1 bar -0,2 bar -0,3 bar -0,4 bar -0,5 bar -0,6 bar -0,7 bar -0,8 bar single stage pumps M/5811 Very high induced air capacity % lower air consumption than comparable single stage units No wearing parts Compatible with a wide range of line contaminants llows direct connection

More information

Pneumatic spool valve islands

Pneumatic spool valve islands Pneumatic spool valve islands P7.GB.R MEGA SPOOL VALVE ISLANDS MEGA pneumatic spool valve islands offer maximum performance along with flexibility, easy installation and simple operation. Due to their

More information

Operating Instructions

Operating Instructions Operating Instructions Light-metal Ex d enclosures / flameproof enclosure > 8265/0 Empty enclosure > 8265/4 Control panel, integrated in Ex e enclosure > 8265/5 Control panel Table of Contents 1 Table

More information

Screw Terminal Block Cables

Screw Terminal Block Cables 9 Screw Terminal Block s Pre-terminated s Simplify of Terminal Blocks to PLC Modules 1 Reduce setup time with cables pre-terminated for the exact PLC module in use 1 No need to make custom connectors 1

More information

Expert Hydrostatic Level Transmitters

Expert Hydrostatic Level Transmitters Expert Hydrostatic s General Features MJK Expert hydrostatic level transmitters are designed for level measurement by submerging the transmitter in open channels, drains and tanks. Expert hydrostatic level

More information

COMPONENT SPECIFICATION M80-7XX SERIES CONNECTORS - THREE ROW

COMPONENT SPECIFICATION M80-7XX SERIES CONNECTORS - THREE ROW COMPONENT SPECIFICATION M80-7XX SERIES CONNECTORS - THREE ROW JUN 200 CONTENTS: SECTION TITLE PAGE Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings

More information

Magnetic level switch type MR783 Instruction Manual

Magnetic level switch type MR783 Instruction Manual Magnetic level switch Magnetic level switch type MR783 1. DESCRIPTION page 3 1.1 Operation page 3 1.2 Application page 3 1.3 Description page 3 2. SPECIFICATIONS page 3 2.1 Service Conditions page 4 2.2

More information

Copper Bonded Ground Rod / Grounding Rods / Copper Bonded Earth Rod / Earthing rods

Copper Bonded Ground Rod / Grounding Rods / Copper Bonded Earth Rod / Earthing rods Copper Bonded Ground Rod / Grounding Rods / Copper Bonded Earth Rod / Earthing rods Copper bonded earth rods are made from low carbon Steel. Earth Rods are molecularly bonded with 99.9% pure electrolytic

More information

ARCA cabinet NEW. High performance polycarbonate cabinet. Protection in demanding environments

ARCA cabinet NEW. High performance polycarbonate cabinet. Protection in demanding environments ARCA cabinet NEW High performance polycarbonate cabinet Protection in demanding environments NEW Fibox ARCA Fibox ARCA non corrosive electrical cabinets for use in extremely harsh and demanding environments

More information

GENERAL CATALOGUE 2O16

GENERAL CATALOGUE 2O16 GENERAL CATALOGUE 2O16 LABORATORY TAPS INDEX TECHNICAL INFORMATION PAGES DRY SERVICE CONTROLS PAGES PRESENTATION TECHNICAL INFORMATION DESIGN AND MANUFACTURING 1 2-3 4 BENCH MOUNTED WALL MOUNTED PENDANT

More information

CALEFFI. Ball zone valves. series /03 GB

CALEFFI. Ball zone valves. series /03 GB all zone valves series cert. n ISO / Function Zone valves are used to automatically shut-off the flow of carrier fluid distributed to a system. Specifically: -In central heating systems, they support the

More information

Push-in fittings CRQS, stainless steel

Push-in fittings CRQS, stainless steel Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard and

More information

The accuracy and safety of the connected measuring devices are directly regulated. of the introduced current transformers.

The accuracy and safety of the connected measuring devices are directly regulated. of the introduced current transformers. Product family Current transformers Current transformers (CTs) are introduced where it is difficult to access a direct measuring ot network current. Current transformer transforms the high network current

More information

CFSW. Hinges with built-in safety multiple switch

CFSW. Hinges with built-in safety multiple switch CFSW. Hinges with built-in safety multiple switch ELESA Original design technical informations Material - Hinge body: self-extinguish high-rigidity SUPER-technopolymer, black colour. Resistant to solvents,

More information

Push-in fittings NPQH

Push-in fittings NPQH Key features Application Effortless selection of the right fitting. Quick Star offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard

More information

UHF/Mini-UHF Coaxial Connectors

UHF/Mini-UHF Coaxial Connectors UHF/MiniUHF Coaxial Connectors The Amphenol UHF/MINIUHF connectors are popular and economical, used when impedance mating is not required. General purpose units are designed to operate satisfactorily op

More information

Socket P2RF-05-S P2RF-08-S Clip & Release Lever Nameplate R99-11

Socket P2RF-05-S P2RF-08-S Clip & Release Lever Nameplate R99-11 Screwless Clamp Terminal Socket P2RF@@S Screwless clamping greatly contributes to reducing wiring time. No over or under tightening of cable connection so better contact reliability is achieved. Double

More information

CFSW. Hinges with built-in safety multiple switch

CFSW. Hinges with built-in safety multiple switch CFSW. Hinges with built-in safety multiple switch ELESA Original design Elesa Standards Main dimensions Fitting Weight Code Description L B f ±0.2 f 1 ±0.2 H h 1 h 2 d 3 d 4 C [Nm]# g 426601 CFSW.110-6-2NO+2NC-C-A

More information

Magnet Wire Terminals and Termination Systems Catalog SIAMEZE Terminals. Product Facts. Applications

Magnet Wire Terminals and Termination Systems Catalog SIAMEZE Terminals. Product Facts. Applications SIMEZE Terminals Product Facts Terminates all copper magnet wire film insulations Eliminates need for pre-stripping conductors Moving eam contact design connects a wide range of magnet wire sizes with

More information

Continental Industries TRANSITION FITTINGS or FAX Visit

Continental Industries TRANSITION FITTINGS or FAX Visit Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and

More information

Safety Edges Safedge Profiles Specifications

Safety Edges Safedge Profiles Specifications Presence Sensing Safety evices Specifications The ability of the Safedge profile to out perform competition lies in its innovative design. It uses a combination of non conductive rubber and flexible wire

More information

powr-bloks POWR-GARD Fuseblocks Distribution/Splicer Blocks and Covers Applications Connectors Description Ampere Ratings Specifications

powr-bloks POWR-GARD Fuseblocks Distribution/Splicer Blocks and Covers Applications Connectors Description Ampere Ratings Specifications powr-bloks Applications Typical applications include heating, air conditioning and refrigeration systems, el e va tor systems, material handling equipment, control panels, motor controls, switchgear, and

More information

EPIC Rectangular Connector Inserts. HBE Series. Technical Data Number of Contacts:

EPIC Rectangular Connector Inserts. HBE Series. Technical Data Number of Contacts: HBE Series HBE series inserts provide reliable termination and performance in the vast majority of medium power and control applications. Methods of termination include screw, crimp, and spring cage clamp.

More information

Calibrated or locked versions available. TREATMENT > Series MD regulators GENERAL DATA. New

Calibrated or locked versions available. TREATMENT > Series MD regulators GENERAL DATA. New > Series MD regulators Series MD pressure regulators New Ports with interchangeable cartridges: threaded (1/8, 1/4, /8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm Versions: single,

More information

SEALED CONNECTORS FOR THE LIMIT SWITCHES

SEALED CONNECTORS FOR THE LIMIT SWITCHES SEALED CONNECTORS FOR THE LIMIT SWITCHES LIST OF MODELS / Sealed connectors are used at the cable-connecting section of limit switches. Type and appearance Materials Features Target market Applications

More information

EPIC Rectangular Connectors HBE Series

EPIC Rectangular Connectors HBE Series HBE Series The HBE series inserts are suitable for applications with high voltages and current. The inserts can be terminated in a variety of ways: screw, crimp, or spring cage clamp. TECHNICAL DATA Number

More information

Glenair Well-Master TM 260 Micro-D Withstands Extreme High Temperature

Glenair Well-Master TM 260 Micro-D Withstands Extreme High Temperature Section : Well-Master Micro- + P eader lenair Well-Master TM Micro- Withstands Extreme igh Temperature Standard Micro- connectors are rated for +125. lenair's MWM Micro- can withstand +150 continuous operating

More information

Inductive Linear Displacement Transducers Model IW 260 Measuring strokes: 80 mm, 170 mm, 240 mm, 360 mm

Inductive Linear Displacement Transducers Model IW 260 Measuring strokes: 80 mm, 170 mm, 240 mm, 360 mm Inductive Linear Displacement Transducers Model IW 260 Measuring strokes 80, 170, 240, 360 Document no. IW 100 HE Date 1.07.201 Contactless, robust sensor system Infinite resolution, no hysteresis Calibrated

More information

Compact Pressure Switch

Compact Pressure Switch Compact Pressure Switch Series 2 (For Vacuum)/ 2 (For Positive Pressure) For General Pneumatics Can be integrated with ZX or ZR ejector system. A Easy and simple wiring Connector type 77 Compact Pressure

More information

SPG. Application example. Pneumatic 2-Finger Parallel Gripper Heavy-load Gripper. Weight 35 kg. Stroke per finger 100 mm.

SPG.  Application example. Pneumatic 2-Finger Parallel Gripper Heavy-load Gripper. Weight 35 kg. Stroke per finger 100 mm. SPG Size 100 Weight 35 kg 10,000 N Stroke per finger 100 mm Workpiece weight 50 kg Application example Gripper unit for heavy V8 engine blocks. SPG 100 2-Finger Heavy-load Gripper 446 www.schunk.com SPG

More information

CLIPPARD HOSE & TUBING

CLIPPARD HOSE & TUBING 3811-1-RL 1/8 O.D. Copper Material: High pressure copper Working Pressures: to 2,500 psig Static Burst Pressure: over 10,000 psig 0.062 Use With: Ferrule tubing connectors: 3810-1, 3810-2, 11923 NYT1-0403-CLT-

More information

ALUMINIUM TANK AND COMPENSATOR - SERIES 09

ALUMINIUM TANK AND COMPENSATOR - SERIES 09 ALUMINIUM TANK AND Series 09 has been extended with the addition of an air/oil compensator. The Ø100 air/oil compensator consists of two aluminium flanges and an anodized jacket with an ISO profile, all

More information

Intrinsically safe solenoid valves on/off controls - ATEX certification

Intrinsically safe solenoid valves on/off controls - ATEX certification www.atos.com Table E130-17/E Intrinsically safe solenoid valves on/off controls - ATEX certification valve body valve spool intrinsically safe solenoid electrical connector manual override DHW-0611/WP/6

More information

Less power great performances

Less power great performances 148 SMART SMART Less power great performances SMART is the answer to the increasing demand for both low energy consumption and high efficiency. Based on many years experience in road lighting, it offers

More information

PAGE INDEX PAGE # CATALOG NUMBER BUS SUPPORTS B 1 AWSTFR BUS SUPPORTS B 2 AWTTFR BUS SUPPORTS B 3 AWTESR BUS SUPPORTS B 4 AWLI BUS SUPPORTS B 6 AACB

PAGE INDEX PAGE # CATALOG NUMBER BUS SUPPORTS B 1 AWSTFR BUS SUPPORTS B 2 AWTTFR BUS SUPPORTS B 3 AWTESR BUS SUPPORTS B 4 AWLI BUS SUPPORTS B 6 AACB PAGE INDEX ABS ABS (2) ATSBS ABR AIWBS AUAB UAS AABS AAS AL ALS ATCF ATCC CL BTCF RS APT ALC AV ALT ALT (N) ATCF U AWCF AW2CF AWTT AWTT 15 AWTT2 AWST DESCRIPTION MULTI RANGE SINGLE CABLE MULTI RANGE DOUBLE

More information

Datamate Specification. Pin Numbering. Mating Profiles. Materials. Mechanical. 3 Row 6.

Datamate Specification. Pin Numbering. Mating Profiles. Materials. Mechanical. 3 Row 6. Datamate Specification Materials Mechanical Mouldings: Glass-filled thermoplastic UL94V-0 Female contacts: rass shell, with eryllium opper inner contact Male contacts: Phosphor bronze Finish: See individual

More information

Compact differential pressure switch Flameproof enclosure Ex d Models DE, DEC

Compact differential pressure switch Flameproof enclosure Ex d Models DE, DEC Mechatronic pressure measurement Compact differential pressure switch Flameproof enclosure Ex d Models DE, DEC WIKA data sheet PV 35.41 Process Compact Series Applications Differential pressure monitoring

More information

RUBBER EXPANSION JOINTS

RUBBER EXPANSION JOINTS RUBBER EXPANSION JOINTS SPOOL-TYPE STANDARD ARCH 150, 200, 200XL The heavy duty proven "industry work horse" Time tested performer Fabric and steel reinforced Constructed for maximum strength and reliability.

More information

SATURNSERIES INTERCHANGE > ISO (for the couplings)

SATURNSERIES INTERCHANGE > ISO (for the couplings) NTERHANE > (for the couplings) TEHNAL FEATURES AND OPTONS nterchange (for the couplings) Sealing description Nitrile NR onnection system Push Available sizes Material /treatment Available threads from

More information

SERIES E30 RAISED RIB

SERIES E30 RAISED RIB SERIES E30 RAISED RIB Eurobelt Series E30 Raised Rib conveyor belt has been designed mainly for making product transfers by using finger plates. Due to its smooth surface of projecting ribs, it is recommended

More information

Erection, maintenance and disposal Inverted installation. Zinc oxide silicone-housed surge arresters PEXLIM R-X, Q-X and P-X

Erection, maintenance and disposal Inverted installation. Zinc oxide silicone-housed surge arresters PEXLIM R-X, Q-X and P-X Erection, maintenance and disposal Inverted installation Zinc oxide silicone-housed surge arresters PEXLIM R-X, Q-X and P-X 1 Important information The following instruction is valid for PEXLIM R-X, PEXLIM

More information

SPCH/ Blowing block

SPCH/ Blowing block > > for linear stretch blow moulding machines > > Compact and safe design > > Best suited for PET bottles up to litres, depending on cycle time Technical features Medium: Compressed air (purity class 3..3

More information

Extension Platform. Base Platform. Crossover. Exit railing. Exit Railing

Extension Platform. Base Platform. Crossover. Exit railing. Exit Railing Base Platform Galvanized With metal grate and two brackets Railing on the long side and a face side Extension Platform Galvanized With metal grate and one bracket Railing on the long side with rail connection

More information

Tapped Hole (.375) Tapped hole 15 (.594) (.391±.004) Frame 19±0.2 (.750±.008) 12.7±0.2 (.500±.008) 19±0.2 (.750±.008) R S 4 x Ø 5.4 (.

Tapped Hole (.375) Tapped hole 15 (.594) (.391±.004) Frame 19±0.2 (.750±.008) 12.7±0.2 (.500±.008) 19±0.2 (.750±.008) R S 4 x Ø 5.4 (. 434 Lift-off In-line Zinc can also be 31.5 19.1 (.750) For Lift-Off For on Lift-Off 1300 (300 lbf) 2200 (500 lbf) 56 T.P.I. (2.21) 31.5 19.1 (.750) Tapped hole Ø 9.5 (.375) ultimate 3300 (750 lbf) 9300

More information

compact ejector, Series ECM with Adjustable release pulse with silencer With filter vacuum switch: electronic 2 x PNP

compact ejector, Series ECM with Adjustable release pulse with silencer With filter vacuum switch: electronic 2 x PNP 00134428 Type Miniature compact injector Ambient temperature min./max. +0 C / +0 C Medium temperature min./max. +0 C / +0 C Working pressure min./max. 2. bar / 6 bar Medium Compressed air Max. particle

More information

Continental Industries STEEL SERVICE TEES or FAX Visit

Continental Industries STEEL SERVICE TEES or FAX Visit Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and

More information

Data sheet Pressure switch type CS December 2001 DKACT.PD.P10.A B1119

Data sheet Pressure switch type CS December 2001 DKACT.PD.P10.A B1119 Pressure switch type CS December 2001 DKACT.PD.P10.A2.02 520B1119 Introduction Pressure switch type CS is part of the Danfoss pressure control range. All CS pressure switches have a built-in pressure-operated,

More information

Operating Instructions

Operating Instructions Operating Instructions Ex d Enclosures in Light Metal / Flameproof Encapsulation > 8265/0 Empty Enclosure > 8265/4 controller, installed in Ex e enclosure > 8265/5 controller Contents 1 Contents 1 Contents...2

More information

Method Two Multi-Character

Method Two Multi-Character Multi-Character 30 Introduction markers are custom made by Partex to make identification easy and cut your costs. Available in all our standard marker profiles, there s a marker for every application.

More information

JUMO dtrans p30 Pressure Transmitter

JUMO dtrans p30 Pressure Transmitter 609 Fulda, Germany Postal address: 605 Fulda, Germany Phone: +49 661 600-0 Fax: +49 661 600-607 Phone: +44 179 6 55 Data Sheet 40466 Page 1/6 JUMO dtrans p0 Pressure Transmitter General application Pressure

More information

Differential Pressure Control Types MP 54, MP 55 and MP 55A

Differential Pressure Control Types MP 54, MP 55 and MP 55A MAKING MODERN LIVING POSSIBLE Data sheet Differential Pressure Control Types MP 54, MP 55 and MP 55A MP 54 and MP 55 oil differential pressure controls are used as safety switches to protect refrigeration

More information

Amphenol RF. Type N. Type N Connectors. Type N. Description. Features/Benefits. Applications

Amphenol RF. Type N. Type N Connectors. Type N. Description. Features/Benefits. Applications Amphenol RF 144 Connectors Description Named after Paul Neill of Bell Labs after being developed in the 1940 s, the offered the first true microwave performance. The connector was developed to satisfy

More information

Flexible & Intelligent

Flexible & Intelligent Flexible & Intelligent The flexible copper tube cuprotherm CTX tubes are copper tubes with a firmly adherent coating. Due to their structure they can be easily processed and are characterized by a flexibility

More information

The SAG type flat, rubber-steel, balance ropes

The SAG type flat, rubber-steel, balance ropes ROPES The SAG type flat, rubber-steel, balance ropes Application of the SAG ropes: The SAG type, flat, rubber-steel balance ropes, further on called the SAG ropes, are used for shaft transport at mines

More information

ORG. Application example. Special Grippers O-ring Assembly Gripper. Weight 1.35 kg. Ring diameter O.D. Assembly appr.ø 5 mm.. ø 160 mm.

ORG. Application example. Special Grippers O-ring Assembly Gripper. Weight 1.35 kg. Ring diameter O.D. Assembly appr.ø 5 mm.. ø 160 mm. Sizes 85 Weight 1.35 kg Ring diameter O.D. Assembly appr.ø 5 mm.. ø 160 mm Ring diameter I.D. Assembly appr. ø 10 mm.. ø 120 mm Application example Automatic machine for the internal or external assembly

More information

Prewired position switches FA series

Prewired position switches FA series 2 Prewired position switches FA series Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 51 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable lever 41 45

More information

W60 Spool & Sleeve Valves for ISO Bases (5599/I)

W60 Spool & Sleeve Valves for ISO Bases (5599/I) W60 Spool & Sleeve Valves for ases (59/I) 5/ Valves Single Solenoid Pilot Spring Return,7,,6 W60760 W6076 W60760 W6076 W60760 W6076 W6070 W607 * ase and electrical connector not included. 5/ Valves Double

More information

Supratec Gesellschaft für Umweltund Verfahrenstechnik mbh OXYFLEX - M T / M T M E M B R A N E D I S C D I F F U S ER AERATION TECHNOLOGY

Supratec Gesellschaft für Umweltund Verfahrenstechnik mbh OXYFLEX - M T / M T M E M B R A N E D I S C D I F F U S ER AERATION TECHNOLOGY OXYFLEX - M T 2 3 5 / M T 3 0 0 M E M B R A N E D I S C D I F F U S ER UND GESELLSCHAFT FÜR UMWELT- VERFAHRENSTECHNIK MBH AERATION TECHNOLOGY von-drais-straße 7 D-55469 Simmern / Hunsrück Tel.: +49 6761

More information

PUR cable. PUR cable. The harmonised version H05BQ-F/H07BQ-F can be used at building construction areas and where HAR-approval is required in Europe.

PUR cable. PUR cable. The harmonised version H05BQ-F/H07BQ-F can be used at building construction areas and where HAR-approval is required in Europe. Polyurethan (PUR) cables are suitable as control cables, for fl exible use where high mechanical stress occurs. The PUR outer jacket has very good resistance against mineral oils and different chemical

More information

F Fittings with 24 cone as per DIN EN ISO Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges

F Fittings with 24 cone as per DIN EN ISO Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges Fittings with 24 cone as per DIN EN ISO 8434-1 Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges Issue 8-17 E F 9.300 Advantages NNWorldwide spread high-pressure

More information

Related products. Components for air preparation and pressure adjustment / F.R.L. unit. Pressure gauge. Indidcator

Related products. Components for air preparation and pressure adjustment / F.R.L. unit. Pressure gauge. Indidcator Related products Pressure gauge / indicator omponents preparation and pressure adjustment / unit Refrigerating ir uto. drain ir Pressure gauge ONTENTS Pressure gauge assembly (G401-W) 660 With safety mark

More information

Halogen free cable. Halogen free cable

Halogen free cable. Halogen free cable SABIX Flame retardent Non Corrosive, FRNC, is an halogen free material based on Polyolefi n that fulfi lls the international norms (IEC) when it comes to fl ame propagation. These cables in different versions

More information

MUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.

MUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5. Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read

More information

Conductor Bushings Series 8174

Conductor Bushings Series 8174 > Current lead-in for Ex d enclosures > 1 to 72 conductors combined in one current lead-in > Series screw-in plug-in > For voltages up to max. 1 V > For size conductor up to 7 mm 2 www.stahl.de 3163E The

More information

*NOTE: 75 OHM SERIES CONNECTORS ARE NOT INTERMATEABLE WITH THE 50 OHM SERIES.

*NOTE: 75 OHM SERIES CONNECTORS ARE NOT INTERMATEABLE WITH THE 50 OHM SERIES. The Connex N connectors with screw coupling are fully interchangeable with N connectors made to the MIL-C-39012 specification. Designed for use in all systems where very good R.F. and mechanical performance

More information

PSH. Application example. Pneumatic 2-Finger Parallel Gripper Long-stroke Gripper. Stroke per finger 14 mm.. 64 mm. Sizes

PSH. Application example. Pneumatic 2-Finger Parallel Gripper Long-stroke Gripper. Stroke per finger 14 mm.. 64 mm. Sizes PSH Sizes 22.. 52 Weight 0.77 kg.. 8.05 kg 320 N.. 1760 N Stroke per finger 14 mm.. 64 mm Workpiece weight 1.60 kg.. 8.80 kg Application example Rapid loading and unloading unit on a swivel head base.

More information

Coiling Tube with Twist-Proof Fitting

Coiling Tube with Twist-Proof Fitting http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Anti-Twisting Coiling Tube for Air Tool Coiling Tube with Twist-Proof Fitting 306 Avoid Twisted Tube Problem

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold plated connector series, single and dual row versions in wire to wire and wire to printed circuit

More information

DVS Technical Codes an Bulletins

DVS Technical Codes an Bulletins DVS Technical Codes an Bulletins DVS 1904-1 (2010-02) Adhesive bonding of plastics in domestic installation Requirements on plants and personnel... 1 DVS 1904-2 (2010-02) Adhesive bonding of plastics in

More information

Installation, use and maintenance instructions. Gas burner (5)

Installation, use and maintenance instructions. Gas burner (5) Installation, use and maintenance instructions Gas burner MODEL GAS 4 TYPE 516 T80 291 (5) TECHNICAL FEATURES Thermal output 180-470 kw 154.800-404.200 kcal/h Fuel Natural gas Pci 8-10 kwh/m 3 = 7000-8600

More information

PSH (inch version) Application example. Pneumatic 2-Finger Parallel Grippers Long-stroke Grippers. Stroke per finger 14 mm.. 64 mm. Sizes 22..

PSH (inch version) Application example. Pneumatic 2-Finger Parallel Grippers Long-stroke Grippers. Stroke per finger 14 mm.. 64 mm. Sizes 22.. PSH (inch version) Sizes 22.. 52 Weight 0.77 kg.. 8.05 kg Gripping force 320 N.. 1760 N Stroke per finger 14 mm.. 64 mm Workpiece weight 1.60 kg.. 8.80 kg Application example Rapid loading and unloading

More information

FTC130 Transmitter. Operating Manual

FTC130 Transmitter. Operating Manual Seite 1 von 11 FTC130 Transmitter Fast Thermal Conductivity Analyzer Operating Manual 1.09KD180724CWI1V05 Messkonzept GmbH Seite 2 von 11 1. Intended Use... 3 2. Description... 4 3. Measuring gases and

More information

The Outer Seal is highly abrasion resistant and provides mechanical stiffness to the splice in order to better match the cable stiffness.

The Outer Seal is highly abrasion resistant and provides mechanical stiffness to the splice in order to better match the cable stiffness. The Sealing Compound encapsulates the electrical splices, provides a strain relief for the conductors, acts as a water block, eliminates air voids which tend to act as pumps to draw in water during pressure

More information

Electronic Instrumentation

Electronic Instrumentation Shielded multipair and multitriad - 00V - 105 C - PLTC - UL 1 Applications Electronic instrumentation, analog and digital signal circuits (-ma). Intrinsically safe circuits. Gas and/or fluid leak detection

More information

Cable entries. Contents. Cable entries. Cable entries Introduction C.2 C.1. Standard cable glands - Plastic C.6. Standard cable glands - Brass C.

Cable entries. Contents. Cable entries. Cable entries Introduction C.2 C.1. Standard cable glands - Plastic C.6. Standard cable glands - Brass C. ontents able entries able entries able entries Introduction.2 Standard cable glands - Plastic.6 Standard cable glands - Brass.9 EM cable glands.15 Standard cable glands - Stainless steel.17 able glands

More information

Technical Specification

Technical Specification Medical Gas Terminal Units (Gas Outlet Points) Technical Specification EN 9170-1 Terminal Unit Product Description CPX Terminal Units comprise a first fix, second fix and check valve. The first fix assembly

More information

EnerVal. Technical data litre storage capacity. Buffer storage vessels

EnerVal. Technical data litre storage capacity. Buffer storage vessels EnerVal Buffer storage vessels Technical data 200-10000 litre storage capacity Contents Title Page number EnerVal (200-2000) Description 3 Part No. 4 Technical data 6 Dimensions 7 EnerVal G (1000-10000)

More information

Brass One-touch Fittings

Brass One-touch Fittings Brass One-touch Fittings Series KQB Fluid temperature: 5 to 0 C Grease-free material: FEP PF Nylon Soft nylon Polyurethane Polyolefin Electroless nickel plated (Brass parts): ade to Order (-X2) K D S Q

More information

M8, M12, M18, M30 Cube 40 x 40 mm. 2 mm 15 mm 2 mm 15 mm 20 mm 40 mm

M8, M12, M18, M30 Cube 40 x 40 mm. 2 mm 15 mm 2 mm 15 mm 20 mm 40 mm Bulletin 872C, 871TM, 871FM, 871C, 871P Product Line Overview Proximity Sensors (872C, 871TM, 871FM) 6 / 2011 Features Bulletin 872C 871TM 871P Size Sensing Range Standard Sensing Range Extended Sensing

More information

ESA Elbow Sealing Adapter Kit

ESA Elbow Sealing Adapter Kit Product Installation Instructions ESA Elbow Sealing Adapter Kit For resealing jacketed concentric neutral cable when installing elbows or other shielded cable accessories Raychem Corporation Electrical

More information