Overspeed governors (113 OG Моment 250 MR, 114 OG Moment 250 A3, 115 OG Moment 250 MRL, 119 OG Moment 250 MRL/1)

Size: px
Start display at page:

Download "Overspeed governors (113 OG Моment 250 MR, 114 OG Moment 250 A3, 115 OG Moment 250 MRL, 119 OG Moment 250 MRL/1)"

Transcription

1 Overspeed governors (113 OG Моment 250 MR, 114 OG Moment 250 A3, 115 OG Moment 250 MRL, 119 OG Moment 250 MRL/1) Instructions for installation and operation

2 113 OG Моment 250 MR 115 OG Moment 250 MRL Overspeed governor Overspeed governor for MR elevators for MRL elevators 114 OG Moment 250 A3 119 OG Moment 250 MRL/1 Overspeed governor Overspeed governor for MR elevator with А3 system for MRL elevator with installation on the rail guide 2

3 113 OG Моment 250 MR Overspeed governor with bi-directional action for MR elevators The overspeed governor is designed for operation with rope diameter of 6 mm. The maximum force generated on the overspeed governor rope 300N. The overspeed governor is configured at the factory for the speed of the Elevator required by the customer (from 0,4 m/s till 2,5 m/s), and is sealed after that. 3

4 115 OG Moment 250 MRL Overspeed governor with bi-directional action for MRL elevators The overspeed governor is designed for operation with rope diameter of 6 mm. The maximum force generated on the overspeed governor rope 300N. The overspeed governor is configured at the factory for the speed of the Elevator required by the customer (from 0,4 m/s till 2,5 m/s), and is sealed after that. 4

5 114 OG Moment 250 A3 Overspeed governor with bi-directional action with the А3 system for MR elevators The overspeed governor is designed for operation with rope diameter of 6 mm. The maximum force generated on the overspeed governor rope 300N. 5

6 The overspeed governor is configured at the factory for the speed of the Elevator required by the customer (from 0,4 m/s till 2,5 m/s), and is sealed after that. 119 OG Moment 250 MRL/1 Overspeed governor with bi-directional action for MRL elevators with installation on the rail guide The overspeed governor is designed for operation with rope diameter of 6 mm. The maximum force generated on the overspeed governor rope 300N. The overspeed governor is configured at the factory for the speed of the Elevator required by the customer (from 0,4 m/s till 2,5 m/s), and is sealed after that. 6

7 1. Description and principle of operation The overspeed governor is the safety device of elevator, and it is designed for the safety gear activation. When the elevator cabin (counterweight) while moving up or down exceed the permissible rated speed until the maximum speed of the overspeed governor activation, the overspeed governor switches on and through the rope activates the safety gear. The overspeed governora 115 OG Moment 250 MRL, 119 OG Moment 250 MRL/1, 113 OG Моment 250 MR, 114 OG Moment 250 A3 have the same principle of operation, they have the same mechanical part, and they differ only in the way of control: by hand or remote. These overspeed governors are the OG of inertial type. The OG consists of: Base pos.1, axle with bearings pos.2, the main sheave pos.3, rocking device pos.4, springs pos.5, slab board pos.6, springs speed settings pos.7, small sheave Ø120mm pos.8, hook pos.9, locking plate pos.10, element for centering of locking plate pos.11, casing pos.12, switch pos.13, the locking mechanism pos.14. On the base pos.1 is fixed the sheave pos. 3 through the axis pos.2. On the sheave pos.3 through the axle on each side are fixed the hooks pos. 9. The springs pos.7 are fixed to the hooks pos.9, tension of which leads to regulation of speed, at which the overspeed governor activates. The setting of the springs is held at the factory, then they are closed with the plates pos.6 and sealed. Also, on the sheave pos.3 the rocking device pos.4 is fixed. On the back side of the sheave pos.6 is fixed the small sheave pos.8, which is designed for testing the overspeed governor at its rated speed. The diameter of small pulley is 120 mm. 7

8 The overspeed governor activates through the rope, which passes through the sheave. When the rated speed of elevator excesses the sheave of overspeed governor pos.3 spins faster. In this case the hooks pos.9, due to the centripetal force are deflected to the edges, overcoming the spring tension pos.7. At achievement the maximum speed of operation, the hooks diverge so, that ledges clinging to the locking plate pos.10, located at the base pos.1. The locking plate pos.10 has the possibility to rotate at a certain angle to a full stop on the grooves on the base pos.1. At the moment of rotation, the locking plate presses on the switch pos.13, which breaks the safety chain until the sheave will be locked pos.3. Tin order to test the traction abilities of the groove of the main sheave it is necessary to press on the locking mechanism pos.14. This mechanism will block the rocking device pos.4, which in turn will block the sheave pos.3. When the force will be removed from the mechanism pos.14 the spring will return it to its original position. Features of overspeed governors for MRL elevators The difference of models: 115 OG Moment 250 MRL, 119 OG Moment 250 MRL/1 from 113 OG Моment 250 MR is that instead of hand locking mechanism pos.14 in this variant the electromagnet is used, which pushes stock and is controlled remotely. Also on the switch pos.13 one more electromagnet is fixed pos.15, which effects on the roller switch pos.13, returning it to its original position. Features of overspeed governors with A3 system The difference of the model 114 OC Moment 250 A3 from 113 ОС Моment 250 MR is that it is additionally equipped with an electromagnet pos.16. While the cabin is moving on the electromagnet pos.16 the voltage is served and the stock is in pulled position. At any stop of the Elevator cabin from the electromagnet pos.16 tension is released and the spring pushes the stock, which blocks the sheave pos.3 of the overspeed governor. The stock position is controlled by the switch pos The overspeed governor installation 8

9 The overspeed governor should be installed in accordance with the requirements of Assembly drawing. The installation work is allowed only trained in this area staff. Before the installation it is necessary to make sure that the overspeed governors meets the required source data: the speed, the rope diameter. It is necessary also to make sure that there are no visible defects. 2.1 The installation of overspeed governors: 113 OG Моment 250 MR 115 OG Moment 250 MRL 114 OG Moment 250 A3 1. To set the overspeed governor above the windows in such way, that the point of the rope runout from the main sheave and the point of the rope fixing to the lever of the locking mechanism of the overspeed governors on the cabin, was on the same vertical line and the deviation should be no more than 5 mm. Also by overspeed governor installation is necessary that the angle between the sheave axis and the vertical was no more than 3. If this angle is more than 3, it may lead to uneven wear of the overspeed governor sheave and of the rope, that may lead to incorrect operation of overspeed governor or loss of functionality. If necessary, align the overspeed governor by means of gaskets. 2. To mark the point of drilling, to make drilling the holes and install the dowels. To install the overspeed governor by means of respective bolts in the predrilled holes with dowels. It is allowed to use the welding instead of dowels, in case of the presence of the embedded parts in the machine room. 3. To cut the rope with sufficient reserve and to put in a working groove of wedge-shaped cross section of the overspeed governor. Attention!!! The overspeed governor is configured to the desired speed at the factory. The adjusting mechanism is sealed. No additional configuration is required. 2.2 The overspeed governor installation 119 OG Moment 250 MRL/1 1. To fix the overspeed governor on the rail guide by means of 6 clamps (not included in the package) so, that the point of the rope runout from the main sheave and the point of the rope fixing to the lever of the locking mechanism of the safety devices activation, was on the same vertical line and the deviation should be no more than 5 mm. Also by overspeed governor installation is necessary that the angle between the sheave axis and the vertical was no more than 3. If this angle is more than 3, it may lead to uneven wear of the overspeed governor sheave and of the rope, that may lead to incorrect operation of overspeed governor or loss of functionality. If necessary, align the overspeed governor by means of gaskets. 2. To cut the rope with sufficient reserve and to put in a working groove of wedge-shaped cross section of the overspeed governor. 9

10 Attention!!! The overspeed governor is configured to the desired speed at the factory. The adjusting mechanism is sealed. No additional configuration is required. 3. Checking of the overspeed governor efficiency 1. To throw the rope of the overspeed governor from the working sheave on the small sheave, this simulates the increase of speed, it gives possibility to check the settings of the overspeed governor at the rated speed of the elevator cabin moving. When there is a frequency inverter on the main drive of the Elevator it is allowed not to use a small sheave for this test, and the elevator acceleration until the overspeed governor activation is realized by means of frequency inverter of the main drive. 2. To check the tension of the overspeed governor rope. If the tension is insufficient, the rope should be pulled additionally by means of adjustable tension device. 3. To start the elevator cabin on the rated speed. 4. The overspeed governor needs to interrupt the electrical circuit of the Elevator safety work and to operate. 3.1 Checking the traction ability of the overspeed governor nahdle. 1. To check the tension of the overspeed governor rope. If the tension is insufficient, the rope should be pulled additionally by means of adjustable tension device. 2. To start the elevator cabin down on the rated speed. 3. For overspeed governor 113OGМоment250MR 114OGMoment250A3 3. For overspeed governor 115OGМоment250MRL 119OGMoment250MRL/1 Click on the lock button pos.14, the overspeed governor in this case should work. Remotely to activate the electromagnet pos.14, the overspeed governor should work in this case. In case of refusal of overspeed governor actuation its further operation until the determination of the reasons is prohibited. Check the correctness of overspeed governor installation, its mounting and location, and also the correctness of the mounting and location of the tension device. If the reason of the failure is not found, the overspeed governor should be send for checking on the address of the company Metroplast During operational checks the people presence in the cabin is prohibited. 10

11 4. Maintenance, control, repair Defective parts must be replaced immediately. The operation of the overspeed governor with the failed parts is not allowed. Further operation of the overspeed governor is prohibited in case of: - presence of deformation and damage on the parts of the overspeed governor. - seals damages on the spring adjustment. In the process of the overspeed governor operation it is not allowed to remove the seal and to adjust the spring tension. To ensure safety and efficiency of overspeed governor it is necessary to perform the maintenance work in accordance with this user manual. The maintenance work must be performed only by trained personnel. Should, if necessary, but not less 1 times in 3 months: - to clean the sheave of the overspeed governor from dirt and grease (in case of their presence) - to check the reliability of the mounting bolts of the overspeed governor. All the bolts must be tightened. - visually inspect the overspeed governor for the presence of defects and wear - visually check the sheave of the overspeed governor for the presence of the wear. The distance from the outer surface of the sheave to the rope must be the same as the diameter of the sheave and must be 4 mm. - to make sure that the hooks pos.9 can rotate on their axis without jamming Additionally for overspeed governors 115 OG Moment 250 MRL, 114 OG Moment 250 A3, 119 OG Moment 250 MRL/1: - to ensure in the normal operation of all electromagnets. 5. General information 5.1 Completeness of delivery The package includes: - the overspeed governor 1 pc. - instruction of installation and operation 1 pc. - a copy of the certificate of conformity 1 pc. 5.2 The label 11

12 The example of the label The label is placed on the overspeed governor. The label shows the following data: - The name of the manufacturer - the overspeed governor model - the rated speed of elevator, m/s - the minimum and maximum speed, by which the overspeed governor is activated, m/s - the serial number of the overspeed governor. 5.3 The liability and warranty This guide is intended for staff familiar with the elevator installation and maintenance. Not allowed: the usage of the overspeed governor not on purpose; the installation of defective or improper purpose the overspeed governor; to make any changes to the design of the overspeed governor without the coordination with the manufacturer; «Metroplast» refuses from any responsibility for the problems, caused by non-observance of the provisions of this manual or technically wrong actions, negatively affecting the performance of the product. 5.4 Denial of warranty and disclaimer Upon the occurrence of one or more of the following reasons may be denied in warranty service: - the overspeed governor was used not on purpose; - non-observance of rules of installation, operation, maintenance and conditions of transport and storage; - unskilled installation, commissioning and maintenance of the overspeed governor; - insufficient control over the details of the overspeed governor which is susceptible to wear; - unqualified and / or unauthorized repair; - the usage of non-original spare parts; 5.5 The spare parts It is necessary to use only the original spare parts. Failure to comply with this requirement, the product is removed from warranty service. 5.6 The transport and storage The product comes in cardboard boxes. Weight of one box is about kg. It is necessary to keep the following conditions during the transport and storage: - to prevent the ingress of moisture and dust to the product; - to prevent the falling and deformation of the product; - to prevent contamination of the overspeed governor and its working parts. - the temperature in the room C; - Rel. humidity max. 80 % at 20 C, without the formation of dew or frost; 12

13 5.7 Safety standards For the safety of their work during installation and maintenance of overspeed governor are responsible themselves assemblers and adjusters. Installation and maintenance must be carried out in a sequence that describes this guide. The personnel performing works on installation and maintenance, must be familiar with this manual. The overspeed governor requires special attention, as its impeccable work ensures the safe elevator use. 6. Possible faults and their causes Fault The overspeed governor actuation at the nominal speed of the Elevator moving While the overspeed governor actuation the elevator cabin is not landing on the safety devices Possible cause -Unrestricted spring wear. - Insufficient tension of the rope of overspeed governor - Pollution or the presence of excess lubricant on the rope of the overspeed governor and/or in the groove of the working sheave of the overspeed governor - The wear of the grooves of the overspeed governor sheave - Malfunction of the drive mechanism of the safety devices. 13

Index Table. Model 794. Installation, Operating and Maintenance Instructions

Index Table. Model 794. Installation, Operating and Maintenance Instructions CLOCKWISE MANUAL MAKING INTO CCW TABLE Index Table Model 794 Installation, Operating and Maintenance Instructions Black & Webster Products Division 545 Hupp Ave. P.O. Box 831, Jackson, Michigan 49204 2009

More information

INSTRUCTION MANUAL Pressure Relief Device LPT

INSTRUCTION MANUAL Pressure Relief Device LPT INSTRUCTION MANUAL Pressure Relief Device LPT 5COV475800 LPT REV00 CONTENT: 1 SAFETY 1.1 Safety instructions 2 1.2 Specified applications 2 1.3 Safety notes on the equipment operation 2 2 PRESSURE RELIEF

More information

OPERATION and MAINTENANCE Guide

OPERATION and MAINTENANCE Guide Catalog No. AIR1000 Winch and Hoist OPERATION and MAINTENANCE Guide Cat. No. AIR1000 1250 Lb. Single Line Pull READ THIS BEFORE OPERATING UNIT INSTALLATION: Mount on clean, flat surface. Use 1/2" mounting

More information

Type BBS-03, BBS-05, BBS-06, BBS-25

Type BBS-03, BBS-05, BBS-06, BBS-25 Type BBS-03, BBS-05, BBS-06, BBS-25 Sterile connection elements Sterile Verbindungselemente Raccords union stériles Operating Instructions Bedienungsanleitung Manuel d utilisation 1. THE OPERATING INSTRUCTIONS

More information

Installation, operation & maintenance manual - original version

Installation, operation & maintenance manual - original version Installation, operation & maintenance manual - original version AVK gate valves for water and wastewater Series 01, 02, 06, 12, 15, 18, 20, 26, 32, 33, 36, 38, 50, 55 and 636 COPYRIGHT AVK GROUP A/S 2018

More information

Translation of the original Operating Instructions for HKS rubber compensators

Translation of the original Operating Instructions for HKS rubber compensators Because of their flexible elements and mechanisms, HKS rubber compensators are susceptible to damage of all types and adverse loads in operation. For reliable operation of a compensator and, thus, the

More information

icreasepro Creaser Operators Manual

icreasepro Creaser Operators Manual 6-2013 Version 3.0 icreasepro Creaser Operators Manual WWW.MBMCORP.COM 800-223-2508 TABLE OF CONTENTS SPECIFICATIONS.1a SAFETY PROCEDURES/CARE & MAINTENANCE..1b COMPONENT IDENTIFICATION 2 TOUCH SCREEN

More information

OPERATIONS MANUAL IMPORTANT SAFETY INFORMATION

OPERATIONS MANUAL IMPORTANT SAFETY INFORMATION OPERATIONS MANUAL IMPORTANT SAFETY INFORMATION Please read, understand and follow all safety information contained in these instructions prior to the use of this tool. Retain these instructions for further

More information

Manual Actuated Boiler Blowdown Valves

Manual Actuated Boiler Blowdown Valves Manual Actuated Boiler Blowdown Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Operation 5. Maintenance 6. Spare parts p.1 1. Safety

More information

Operating instructions Safety Rope Emergency Stop Switches ZB0052 / ZB0053 ZB0072 / ZB0073

Operating instructions Safety Rope Emergency Stop Switches ZB0052 / ZB0053 ZB0072 / ZB0073 Operating instructions Safety Rope Emergency Stop Switches UK ZB0052 / ZB0053 ZB0072 / ZB0073 7390878 / 02 03 / 2011 Contents 1 Safety instructions...3 2 Installation / set-up...4 2.1 Applications...4

More information

INSTALLATION COMMISSIONING, OPERATION & MAINTENANCE MANUAL

INSTALLATION COMMISSIONING, OPERATION & MAINTENANCE MANUAL WedgeRock RW Series Worm Gear Actuators INSTALLATION COMMISSIONING, OPERATION & MAINTENANCE MANUAL Revision 01 Date 4/3/17 Page 1 Table of Contents 1.0 INTRODUCTION... 4 1.1 PURPOSE... 4 1.2 AUDIENCE...

More information

Mounting and Operating Instructions EB 2558 EN. Self-operated Pressure Regulators. Type Pressure Build-up Regulator

Mounting and Operating Instructions EB 2558 EN. Self-operated Pressure Regulators. Type Pressure Build-up Regulator Self-operated Pressure Regulators Type 2357-31 Pressure Build-up Regulator with safety function and integrated excess pressure valve Type 2357-31 with non-return unit at port C Ports A and B with soldering

More information

Name of product: Gripper for vertical façade FTV panels Types: PVF (60, 80, 100, 120, 133, 150, 172, 200 and 240 mm) INSTRUCTIONS FOR USE

Name of product: Gripper for vertical façade FTV panels Types: PVF (60, 80, 100, 120, 133, 150, 172, 200 and 240 mm) INSTRUCTIONS FOR USE Name of product: Gripper for vertical façade FTV panels Types: PVF (60, 80, 100, 120, 133, 150, 172, 200 and 240 mm) INSTRUCTIONS FOR USE CONTENTS INTRODUCTION - GENERAL INFORMATION 3 Purpose of instructions

More information

Operation Manual. PEGAS NovoTap, PEGAS NovoTap+

Operation Manual. PEGAS NovoTap, PEGAS NovoTap+ Operation Manual PEGAS NovoTap, PEGAS NovoTap+ www.beerinnovations.com Operation Manual 3 1. Assembling Diagram PEGAS NovoTap Assembling Diagram 1. Body 2. Front part of the body 3. Front part of the body

More information

Rear Drive System SERVICE INSTRUCTION. Specifications SI-R670B

Rear Drive System SERVICE INSTRUCTION. Specifications SI-R670B - SERVICE INSTRUCTION SI-R670B t Rear Drive System Before use, read these instructions carefully, and follow them for correct use. In order to realize the best performance, we recommend that the following

More information

Bray/ VAAS O-Ported Series Knife Gate Valve 770/780 Series Operation and Maintenance Manual

Bray/ VAAS O-Ported Series Knife Gate Valve 770/780 Series Operation and Maintenance Manual Bray/ VAAS Knife Gate Valve 770/780 Series Operations and Maintenance Manual Table of Contents Definition of Terms 1 Safety Instructions 1 Introduction 2 Unpacking 2 Storage 2 Installation 2 Commissioning

More information

SSS SWEEPERS MODELS MS-31 & MS-39

SSS SWEEPERS MODELS MS-31 & MS-39 SSS SWEEPERS MODELS MS-31 & MS-39 INTRODUCTION OPERATING & MAINTENANCE INSTRUCTIONS READ THIS BOOK This operator s book has important information for the use and safe operation of this machine. Read this

More information

FLANGED TWO-PIECE BALL VALVES

FLANGED TWO-PIECE BALL VALVES INTRODUCTION This instruction manual includes installation, operation, and maintenance information for FNW flanged split-body ball valves. This manual addresses lever operated ball valves only. Please

More information

DIRECT DRIVE DIXIE DOUBLE SEAMER Model 25D

DIRECT DRIVE DIXIE DOUBLE SEAMER Model 25D OPERATOR'S MANUAL DIRECT DRIVE DIXIE DOUBLE SEAMER Model 25D LUBRICATE DAILY: A. Gears inside gear housing at chuck shaft (1) Oil B. Seam rolls and cam rolls (4) - Oil C. Seam roll levers through gear

More information

L230 LED 40 Watt Searchlight

L230 LED 40 Watt Searchlight User Instruction & Installation Manual L230 LED 40 Watt Searchlight Product Reference Number: A6158 12/24v DECK A6159 12/24v CABIN Manufacturer s details: Francis Searchlights Ltd Union Road, Bolton Lancashire,

More information

blocstop BSO 500 and BSO 1000 series Fall arrest device for suspended man-riding installations Assembly and Operating Instructions

blocstop BSO 500 and BSO 1000 series Fall arrest device for suspended man-riding installations Assembly and Operating Instructions blocstop BSO 500 and BSO 1000 series Fall arrest device for suspended man-riding installations Assembly and Operating Instructions G671_BA_BSO5_10_US.pm6 GREIFZUG GmbH 03/2007 Griphoist Division www.tractel.com

More information

VS18/26 with PROFINET and EtherNet/IP Interface. ATEX Installation Instructions

VS18/26 with PROFINET and EtherNet/IP Interface. ATEX Installation Instructions VS18/26 with PROFINET and EtherNet/IP Interface ATEX Installation Instructions INDEX 1. INTENDED USAGE 3 2. OPERATING MANUAL ATEX 4 2.1 General conditions 4 2.2 Installation 5 2.3 Operating 5 2.4 Failures

More information

Installation, Operating & Maintenance Instructions. All-metal gate valve with extended pneumatic actuator. Series 48 DN mm (I.D.

Installation, Operating & Maintenance Instructions. All-metal gate valve with extended pneumatic actuator. Series 48 DN mm (I.D. Installation, Operating & Maintenance Instructions All-metal gate valve with extended pneumatic actuator Series 48 DN 16 320 mm (I.D. ⅝" 12") This manual is valid for the following product ordering numbers:

More information

FLANGED TWO-PIECE BALL VALVES

FLANGED TWO-PIECE BALL VALVES INTRODUCTION This instruction manual includes installation, operation, and maintenance information for FNW flanged split-body ball valves. This manual addresses lever operated ball valves only. Please

More information

HOLLISTER-WHITNEY ROPE GRIPPER

HOLLISTER-WHITNEY ROPE GRIPPER HOLLISTER-WHITNEY ROPE GRIPPER Instructions for Model #620GA1, 620GA2 (Patented worldwide, other patents pending) WARNING: KEEP HANDS CLEAR OF ROPE GRIPPER. FORCES CREATED CAN CRUSH FINGERS. Figure 1 ROPE

More information

MANUAL SEALLESS STEEL STRAPPING TOOL MODEL A

MANUAL SEALLESS STEEL STRAPPING TOOL MODEL A OPERATION MANUAL / SPARE PARTS LIST MANUAL SEALLESS STEEL STRAPPING TOOL MODEL A337.0001 13.1912.01 13191201.en/MAS/ 10.02 INDEX PAGE 1 SAFETY INSTRUCTIONS 2 2 WARRANTY CONDITIONS AND LIABILITY 4 3 APPROPRIATE

More information

OPERATING and MAINTENANCE INSTRUCTIONS MAXIS 3K Puller (M3K-M)

OPERATING and MAINTENANCE INSTRUCTIONS MAXIS 3K Puller (M3K-M) OPERATING and MAINTENANCE INSTRUCTIONS MAXIS 3K Puller (M3K-M) 04/17 (M3K-M) READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND SAFETY INFORMATION IN THIS MANUAL BEFORE OPERATING OR SERVICING THIS TOOL TABLE

More information

Name of product: Gripper of FTV panels for horizontal façades Types: PHF (60, 80, 100, 120, 133, 150, 172,200, 240) INSTRUCTIONS FOR USE

Name of product: Gripper of FTV panels for horizontal façades Types: PHF (60, 80, 100, 120, 133, 150, 172,200, 240) INSTRUCTIONS FOR USE Name of product: Gripper of FTV panels for horizontal façades Types: PHF (60, 80, 100, 120, 133, 150, 172,200, 240) INSTRUCTIONS FOR USE CONTENTS TABLE OF CONTENTS 3 INTRODUCTION - General information

More information

USER MANUAL. JET TST and JET TST S.

USER MANUAL. JET TST and JET TST S. USER MANUAL JET TST and JET TST S www.sisteven.com Types of Jet fans: JET TST UNI: Impulse axial fan single direction JET TST S UNI: Impulse axial fan single direction (short case) JET TST REV: Impulse

More information

Product Manual B-Safety ClassicLine & PremiumLine Emergency Eyewash and Eye/Face Wash Equipment

Product Manual B-Safety ClassicLine & PremiumLine Emergency Eyewash and Eye/Face Wash Equipment Product Manual B-Safety ClassicLine & PremiumLine Emergency Eyewash and Eye/Face Wash Equipment 1. Application Emergency eyewash and eye/face wash equipment are prescribed first aid installations for workplaces

More information

Chapter 2 Rigging. Cutting Wire Rope. Anchoring Wire Rope to Drum. Winding Wire Rope Onto Drum

Chapter 2 Rigging. Cutting Wire Rope. Anchoring Wire Rope to Drum. Winding Wire Rope Onto Drum Chapter 2 Rigging Cutting Wire Rope The wire rope must be tightly seized on both sides of the point where the wire rope will be cut, as shown in Figure 2-1. Seize the wire rope with either seizing wire

More information

USER MANUAL. 1. Principle of operation. 2. Delivery condition. SPRING-LOADED SAFETY VALVES zarmak. Edition: 07/2016 Date: V (ex.

USER MANUAL. 1. Principle of operation. 2. Delivery condition. SPRING-LOADED SAFETY VALVES zarmak. Edition: 07/2016 Date: V (ex. ZETKAMA Sp. z o.o. ul. 3 Maja 12 PL 57-410 Ścinawka Średnia SPRING-LOADED SAFETY VALVES zarmak USER MANUAL 782V (ex. 782) Edition: 07/2016 Date: 01.07.2016 TABLE OF CONTENTS 1. Principle of operation 2.

More information

OPERATING and MAINTENANCE INSTRUCTIONS MAXIS 6K Puller (M6K-M)

OPERATING and MAINTENANCE INSTRUCTIONS MAXIS 6K Puller (M6K-M) OPERATING and MAINTENANCE INSTRUCTIONS MAXIS 6K Puller (M6K-M) READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND SAFETY INFORMATION IN THIS MANUAL BEFORE OPERATING OR 04/17 (M6K-M) SERVICING THIS TOOL TABLE

More information

DM-MARD (English) Dealer's Manual. ROAD MTB Trekking. City Touring/ Comfort Bike REAR DERAILLEUR XTR RD-M9100 RD-M9120

DM-MARD (English) Dealer's Manual. ROAD MTB Trekking. City Touring/ Comfort Bike REAR DERAILLEUR XTR RD-M9100 RD-M9120 (English) DM-MARD001-00 Dealer's Manual ROAD MTB Trekking City Touring/ Comfort Bike URBAN SPORT E-BIKE REAR DERAILLEUR XTR RD-M9100 RD-M9120 CONTENTS CONTENTS...2 IMPORTANT NOTICE...3 TO ENSURE SAFETY...4

More information

Manual winch MANISTOR 100 and 200

Manual winch MANISTOR 100 and 200 Manual wall winch Manual winch MANISTOR 100 and 200 Instruction manual UK 173-192.10-3 PRODUCT DEVELOPED AND MANUFACTURED ACCORDING TO NF EN 13157 STANDARD REGISTERED DESIGN To ensure the constant improvement

More information

FLOW CONDITIONER «EMIS-VEKTA 1200» EMIS-VEKTA 1200.UM.PS v User manual Passport. «EMIS», CJSC Russia, Chelyabinsk

FLOW CONDITIONER «EMIS-VEKTA 1200» EMIS-VEKTA 1200.UM.PS v User manual Passport.   «EMIS», CJSC Russia, Chelyabinsk EMIS-VEKTA 1200.UM.PS 27.11.2012 v1.0.5 FLOW CONDITIONER User manual Passport www.emis-kip.ru «EMIS», CJSC Russia, Chelyabinsk Disclaimer "EMIS", CJSC reserves the right to make changes in the design and

More information

310 SERIES TILT-TO-LOAD ROTATOR. The Specialist In Drum Handling Equipment

310 SERIES TILT-TO-LOAD ROTATOR. The Specialist In Drum Handling Equipment OPERATOR S MANUAL FOR MORSE TILT-TO-LOAD DRUM ROTATOR SAFETY INFORMATION: While Morse Manufacturing Co. drum handling equipment is engineered for safety and efficiency, a high degree of responsibility

More information

FLANGED MULTI-PORT BALL VALVES

FLANGED MULTI-PORT BALL VALVES INTRODUCTION This instruction manual includes installation, operation and maintenance information for flanged multi-port ball valves. This manual addresses lever operated ball valves only. Please refer

More information

CLIENT NAME: LOCATION: CALM BUOY INSPECTION:

CLIENT NAME: LOCATION: CALM BUOY INSPECTION: INSPECTOR REVIEWED INSPECTION OF CALM BUOY OVERALL PHOTO REVISION DESCRIPTION: Preliminary / Final Page: 1 TABLE OF CONTENT 1. MANAGEMENT SUMMARY... 3 1.1. SCOPE OF WORK:... 3 1.2. CORRECTIVE ACTIONS...

More information

OPERATIONS/PARTS MANUAL FOR PATTERSON'S WWP50-H-14 HYDRAULIC WINCH.

OPERATIONS/PARTS MANUAL FOR PATTERSON'S WWP50-H-14 HYDRAULIC WINCH. W. W. Patterson Company 3 Riversea Road Pittsburgh, PA 15233 Phone: 800-322-2018 FAX: 412-322-2785 OPERATIONS/PARTS MANUAL FOR PATTERSON'S WWP50-H-14 HYDRAULIC WINCH. Please fill in the following blanks

More information

Quattrocycle BV. Quattrocycle. User Manual. Last update February Quattrocycle BV Bremkant EJ Middelbeers. User Manual Quattrocycle 1

Quattrocycle BV. Quattrocycle. User Manual. Last update February Quattrocycle BV Bremkant EJ Middelbeers. User Manual Quattrocycle 1 Quattrocycle User Manual Last update February 2010 Quattrocycle BV Bremkant 6 5091 EJ Middelbeers User Manual Quattrocycle 1 Table of Contents Page Chapter 1: Introduction 3 Chapter 2: Instructions for

More information

OPERATION MANUAL PNEUMATIC VALVES

OPERATION MANUAL PNEUMATIC VALVES OPERATION MANUAL PNEUMATIC VALVES DIRECTIVE 2014/34/EU ATEX ENGLISH Index 1 Product identification 2 Security 3 Guarantee 4 Transportation 5 Assemblage 6 Setting up 7 Adjustments 8 Technical information

More information

Installation, Operation and Maintenance Manual for Back Pressure Regulator

Installation, Operation and Maintenance Manual for Back Pressure Regulator Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN

More information

OPERATOR S MANUAL SPREADER. CSS, VNQ [For Combine Harvester AW82V] Original instructions

OPERATOR S MANUAL SPREADER. CSS, VNQ [For Combine Harvester AW82V] Original instructions OPERATOR S MANUAL SPREADER CSS, VNQ [For Combine Harvester AW82V] en Original instructions Introduction Introduction Please read this operator s manual before using your spreader. We would first like to

More information

DM-RD (English) Dealer s Manual. ROAD Rear Derailleur RD-9000 RD-6800 RD-5800 RD-4700

DM-RD (English) Dealer s Manual. ROAD Rear Derailleur RD-9000 RD-6800 RD-5800 RD-4700 (English) DM-RD0003-09 ROAD Rear Derailleur Dealer s Manual RD-9000 RD-6800 RD-5800 RD-4700 CONTENTS IMPORTANT NOTICE...3 TO ENSURE SAFETY...4 LIST OF TOOLS TO BE USED...6 INSTALLATION...8 Chain length...

More information

OPERATOR'S MANUAL DIRECT DRIVE DIXIE DOUBLE SEAMER Model 10D

OPERATOR'S MANUAL DIRECT DRIVE DIXIE DOUBLE SEAMER Model 10D OPERATOR'S MANUAL DIRECT DRIVE DIXIE DOUBLE SEAMER Model 10D OIL DAILY: A. Gears inside gear housing through oil groove in gear housing at cut surface of chuck shaft. (Oil through #517 gear housing cover

More information

SG-7R46 SG-7R45 BR-IM41-R CJ-7S40 WARNING CAUTION SERVICE INSTRUCTIONS. Inter-7 Hub. Inter-M Brake Cassette joint NOTE:

SG-7R46 SG-7R45 BR-IM41-R CJ-7S40 WARNING CAUTION SERVICE INSTRUCTIONS. Inter-7 Hub. Inter-M Brake Cassette joint NOTE: t WARNING It is important to completely understand the operation of your bicycle's brake system. Improper use of your bicycle's brake system may result in a loss of control or an accident, which could

More information

HYDRAULIC WINCH FOR AUGERS UP TO WR10 X 71 / W130 X 41 ASSEMBLY & OPERATION MANUAL

HYDRAULIC WINCH FOR AUGERS UP TO WR10 X 71 / W130 X 41 ASSEMBLY & OPERATION MANUAL HYDRAULIC WINCH ASSEMBLY & OPERATION MANUAL Read this manual before using product. Failure to follow instructions and safety precautions can result in serious injury, death, or property damage. Keep manual

More information

OPERATIONS MANUAL RIGHT ANGLE CAPSTAN

OPERATIONS MANUAL RIGHT ANGLE CAPSTAN OPERATIONS MANUAL RIGHT ANGLE CAPSTAN TABLE OF CONTENTS Patterson Heritage... 3 ISO 9001 Certification and Affiliates... 4 Warranty and Return Policy... 5 Important Operations Manual Instructions, Basic

More information

Triple Tine Mechanical Grapple

Triple Tine Mechanical Grapple Attachment Solutions Triple Tine Mechanical Grapple Operators Manual KENCO Mechanical Grapple Operation Manual 1 TABLE OF CONTENTS 170 State Route 271 Section I. General Information.... 3 Section II. Safety...

More information

Installation, Operating, Inspection and Maintenance Instructions Ladder Climber s Safety System. Warning

Installation, Operating, Inspection and Maintenance Instructions Ladder Climber s Safety System. Warning OWNER'S MANUAL Installation, Operating, Inspection and Maintenance Instructions Ladder Climber s Safety System Model # s: 6000, 6001, 6010 Warning You must read and fully understand all instructions, or

More information

Hand winch MANIBOX GR

Hand winch MANIBOX GR Hand spurgear winch Hand winch MANIBOX GR Instruction manual UK 34-331.09/9 PRODUCT DEVELOPED AND MANUFACTURED ACCORDING TO STANDARD NF EN 13157 In an endeavour to improve its products, HUCHEZ reserves

More information

WIRE ROPE PULLING MACHINE

WIRE ROPE PULLING MACHINE WIRE ROPE PULLING MACHINE Spare parts list and exploded view Specifications Dimensions Item No. 0.8T 1.6T 3.2T 5.4T Rated Capacity kg 800 1600 3200 Rated Forward Handpower N 343 441 441 Rated Forward Travel

More information

Instructions for Use Wire Rope Hoist SAT 08 / SAT 16 / SAT 32

Instructions for Use Wire Rope Hoist SAT 08 / SAT 16 / SAT 32 Instructions for Use Wire Rope Hoist SAT 08 / SAT 16 / SAT 32 Item no. Load-carrying capacity (payload) Rope diameter Weight without rope Device dimensions SAT 08 800 kg SAT 16 SAT 32 Rope advance per

More information

INSTALLATION PROCEDURE FOR OPGW FIBER OPTIC CABLES

INSTALLATION PROCEDURE FOR OPGW FIBER OPTIC CABLES Page 1 of 15 INSTALLATION PROCEDURE FOR OPGW FIBER OPTIC CABLES Page 2 of 15 1. PURPOSE 2. SCOPE 3. REFERENCES 4. GENERAL INDEX 5. PROCEDURES 5.1 Line survey 5.2 Transport, loading, unloading and storage

More information

IMPORTANT: RECEIVING INSTRUCTIONS:

IMPORTANT: RECEIVING INSTRUCTIONS: Instruction Sheet Sidewinder Mechanical Bender IMPORTANT: RECEIVING INSTRUCTIONS: Visually inspect all components for shipping damage. If any shipping damage is found, notify carrier at once.shipping damage

More information

Installation and Operation Instruction Manual

Installation and Operation Instruction Manual Installation and Operation Instruction Manual Toggle Lok Anchor - Model #7442 Portable Concrete Anchorage Connector ANSI Z359.1 5,000 lbs / 22.24 kn FallTech, Inc 1306 Alameda Street Compton, CA 90221

More information

Change Valve. Push-In Fitting Type Three-way Changeover Valve. Changeover Air Direction by 90. Lightweight and Compact Design.

Change Valve. Push-In Fitting Type Three-way Changeover Valve. Changeover Air Direction by 90. Lightweight and Compact Design. http://www.pisco.co.jp VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Three-way Changeover Valve Change Valve Changeover Air Direction by 90 Lightweight and Compact Design. Fine Operability and

More information

Not a toy. Adult supervision required. Misuse or careless use may cause serious injury or death. May be dangerous up to 500 yards (457 meters).

Not a toy. Adult supervision required. Misuse or careless use may cause serious injury or death. May be dangerous up to 500 yards (457 meters). Owner s manual www.umarex-usa.com CO2 repeater rifle cal..177 (4.5mm) pellet cal..22 (5.5mm) pellet Not a toy. Adult supervision required. Misuse or careless use may cause serious injury or death. May

More information

Type 2000 INOX. Quickstart. English Deutsch Français. 2/2-way angle seat valve 2/2-Wege Schrägsitzventil Vanne à siège incliné 2/2 voies

Type 2000 INOX. Quickstart. English Deutsch Français. 2/2-way angle seat valve 2/2-Wege Schrägsitzventil Vanne à siège incliné 2/2 voies Type 2000 INOX 2/2-way angle seat valve 2/2-Wege Schrägsitzventil Vanne à siège incliné 2/2 voies Quickstart English Deutsch Français Contents 1 QUICKSTART... 2 2 CONTACT ADDRESS... 2 3 INTENDED USE...

More information

SOTR Special Operations Tactical Respirator

SOTR Special Operations Tactical Respirator SOTR Special Operations Tactical Respirator OPERATOR S MANUAL FOR INDIVIDUAL RESPIRATORY PROTECTION OPS-CORE 2018 OMM G055-1000 REV. B INTRODUCTION ABOUT YOUR SOTR The Ops-Core Special Operations Tactical

More information

DelVal Flow Controls Private limited

DelVal Flow Controls Private limited DelVal Flow Controls Private limited (A DIVISION OF DelTech CONTROLS LLC, USA) DelVal Series 50/5, 5A/5B Butterfly Valves INSTALLATION, OPERATION AND MAINTENANCE MANUAL ENGINEERING DATA SHEET E.D.S. NO

More information

Pressure maintenance valve SDV-P / SDV-P-E

Pressure maintenance valve SDV-P / SDV-P-E Translation of the original manual Pressure maintenance valve SDV-P / SDV-P-E Assembly and Operating Manual Superior Clamping and Gripping Imprint Imprint Copyright: This manual remains the copyrighted

More information

Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)

Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0) Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk SOFT LINE CUTTER SL55 PRODUCT CODE No. 980504 INSTRUCTIONS FOR INSTALLATION,

More information

Contents MAX CLIMBER 1000 RACK & PINION HOIST 1

Contents MAX CLIMBER 1000 RACK & PINION HOIST 1 Contents HOIST IDENTIFICATION... 2 IDENTIFICATION PLATE LOCATION... 2 DESCRIPTION OF THE MACHINE... 3 MACHINE APPLICATION... 4 SAFETY FEATURES & SPECIFICATIONS... 5 SAFETY GUIDELINES... 6 TECHNICAL DESCRIPTION...

More information

Fiber Cable Puller with Tuf-Lugger lite

Fiber Cable Puller with Tuf-Lugger lite 7 OPERATING INSTRUCTION MANUAL Fiber Cable Puller with Tuf-Lugger lite Copyright 2015 DCD Design & Manufacturing Ltd. Revision 1.0 IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING The Fiber

More information

Operator s Manual. with Maintenance Schedule. Fourth Edition Second Printing Part No

Operator s Manual. with Maintenance Schedule. Fourth Edition Second Printing Part No Operator s Manual with Maintenance Schedule Fourth Edition Second Printing Part No. 82297 Operator s Manual Fourth Edition Second Printing Important Read, understand and obey these safety rules and operating

More information

OPERATIONS/PARTS MANUAL FOR PATTERSON'S WWP75H-10 HYDRAULIC WINCH.

OPERATIONS/PARTS MANUAL FOR PATTERSON'S WWP75H-10 HYDRAULIC WINCH. W. W. Patterson Company 3 Riversea Road Pittsburgh, PA 15233 Phone: 800-322-2018 FAX: 412-322-2785 OPERATIONS/PARTS MANUAL FOR PATTERSON'S WWP75H-10 HYDRAULIC WINCH. Please fill in the following blanks

More information

Coiling Tube with Twist-Proof Fitting

Coiling Tube with Twist-Proof Fitting http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Anti-Twisting Coiling Tube for Air Tool Coiling Tube with Twist-Proof Fitting 306 Avoid Twisted Tube Problem

More information

VL 2K LIFT D-L WINCH INSTRUCTIONS (Applies to P/Ns , , , , , )

VL 2K LIFT D-L WINCH INSTRUCTIONS (Applies to P/Ns , , , , , ) VL 2K LIFT D-L WINCH INSTRUCTIONS (Applies to P/Ns 3714022, 3714028, 3714034, 3714040, 3714043, 3714046) REIMANN & GEORGER CORPORATION MARINE PRODUCTS BUFFALO, NY P/N 6112103 04/09/18 1 SAFETY 1.1 INTRODUCTION

More information

USER MANUAL. MACMAG magnetic separator MHK MHF

USER MANUAL. MACMAG magnetic separator MHK MHF USER MANUAL MACMAG magnetic separator MHK MHF Important Read the safety precautions before use. Thank you for your purchase. This user manual contains important information on avoiding damage and personal

More information

Operating Instruction English. Revision A Date author NH This operating instruction is not subject to updating. Airgun

Operating Instruction English. Revision A Date author NH This operating instruction is not subject to updating. Airgun Revision A Date 23.11.2012 author NH This operating instruction is not subject to updating Airgun 95400 1 This airgun is a quality product with special focus on high functionality, easy handling, safety

More information

DLx1200, DLx1500, DLx1900, DLx2300 PULLING WINCHES. U.S. Patent Canadian Patent Model #DLx1200

DLx1200, DLx1500, DLx1900, DLx2300 PULLING WINCHES. U.S. Patent Canadian Patent Model #DLx1200 DLx1200, DLx1500, DLx1900, DLx2300 PULLING WINCHES U.S. Patent 6116580 Canadian Patent 2378538 Model #DLx1200 WARNING READ INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THIS WINCH.

More information

TECH TIPS: ROPE DEFECTS

TECH TIPS: ROPE DEFECTS Hoist Ropes: Why must they be inspected? A hoist rope is not made to last forever. This is a useful fact, as the kinds of wear that appear on a rope can indicate areas of problems within an installation

More information

Johnston Invar Coupling Johnston Invar Coupling

Johnston Invar Coupling Johnston Invar Coupling Johnston Invar Coupling Rev.10 (2017.07) AvdS Page 1 of 8 Table of contents I. STRUCTURE OF THE MANUAL / CLARIFICATION... 3 II. SAFETY AND HEALTH CONCERNS... 4 1 GENERAL REMARK... 5 2 ASSEMBLY INSTRUCTIONS...

More information

MANITOWOC MODEL TON CAPACITY

MANITOWOC MODEL TON CAPACITY LIFTING CHARTS - Crawler Cranes ANITOWOC ODEL - TON CAPACITY BOO RIGGING GUIDE ODEL # HEAVY LIFT BOO Table of Contents General... Assist Crane Requirements... Accessing Parts... Installation and Removal

More information

Usage and maintenance manual for the fall arrester system of the Söll GlideLoc type with a guided type fall arrester. Söll Comfort 2. Order No.

Usage and maintenance manual for the fall arrester system of the Söll GlideLoc type with a guided type fall arrester. Söll Comfort 2. Order No. Usage and maintenance manual for the fall arrester system of the Söll GlideLoc type with a guided type fall arrester Söll Comfort 2 Order No. 23331 in accordance with EN 353-1:2002 / CNB/P/11.073 Serial

More information

Thumb Shifter Plus Thumb Shifter

Thumb Shifter Plus Thumb Shifter (English) DM-SL0004-01 Dealer's Manual Thumb Shifter Plus Thumb Shifter Thumb Shifter Plus SL-FT55 SL-TX50 SL-TX30 Thumb Shifter SL-TZ20 IMPORTANT NOTICE This dealer's manual is intended primarily for

More information

BUTTERFLY VALVES Series 800

BUTTERFLY VALVES Series 800 BUTTERFLY VALVES Series 800 WARNING Before proceeding read ALL instructions and become familiar with the equipment and associated drawings. Follow ALL applicable safety regulations and codes for pressurized

More information

Pull-rope emergency stop switch Type HENEX and SEGEX OPERATING INSTRUCTIONS

Pull-rope emergency stop switch Type HENEX and SEGEX OPERATING INSTRUCTIONS Pull-rope emergency stop switch Type OPERATING INSTRUCTIONS Legal Notice (Translation of the original) Document No.: 94.058 816.191 Pull-rope emergency stop switch, Type HENEX and SEGEX Product number:

More information

CP10K. 10,000 lb. Cable Puller Instruction Sheet. SAFETY ISSUES

CP10K. 10,000 lb. Cable Puller Instruction Sheet.   SAFETY ISSUES 10,000 lb. Cable Puller Instruction Sheet CP10K SAFETY ISSUES IMPORTANT USER SAFETY AND PROTECTION: In setting up systems to fit your operations, care must be taken to select the proper components and

More information

DM-MBST (English) Dealer's Manual. ROAD MTB Trekking. City Touring/ Comfort Bike. Shifting lever. EZ-FIRE Plus ST-EF500 ST-EF510

DM-MBST (English) Dealer's Manual. ROAD MTB Trekking. City Touring/ Comfort Bike. Shifting lever. EZ-FIRE Plus ST-EF500 ST-EF510 (English) DM-MBST001-00 Dealer's Manual ROAD MTB Trekking City Touring/ Comfort Bike URBAN SPORT E-BIKE Shifting lever EZ-FIRE Plus ST-EF500 ST-EF510 CONTENTS IMPORTANT NOTICE... 3 TO ENSURE SAFETY...

More information

WINCH MOUNT KIT OWNER S MANUAL

WINCH MOUNT KIT OWNER S MANUAL WINCH MOUNT KIT For KAWASAKI ATVs OWNER S MANUAL MODEL NUMBER: 25-2150 CUSTOMER MUST RECEIVE A COPY OF THIS OWNER S MANUAL AT TIME OF SALE 2005 Cycle Country Accessories Corp. 4/10/12 MAN0097 9 Please

More information

INSTALLATION, OPERATION AND SERVICE MANUAL ABS AIR BAG LIFT

INSTALLATION, OPERATION AND SERVICE MANUAL ABS AIR BAG LIFT INSTALLATION, OPERATION AND SERVICE MANUAL ABS AIR BAG LIFT P.O. Box 1058 1058 West Industrial Avenue Guthrie, OK 73044-1058 405-282-5200 FAX: 405-282-8105 www.autoquip.com Item # 830ABS Version 1.0 07/2001

More information

SSS SWEEPERS MODELS MS-21 & MS-29

SSS SWEEPERS MODELS MS-21 & MS-29 SSS SWEEPERS MODELS MS-21 & MS-29 INTRODUCTION OPERATING & MAINTENANCE INSTRUCTIONS This operator s book has important information for the use and safe operation of this machine. Read this book carefully

More information

SG36KTL-M Quick Installation Guide. 1 Unpacking and Inspection

SG36KTL-M Quick Installation Guide. 1 Unpacking and Inspection SG36KTL-M Quick Installation Guide This guide provides a general instruction of the installation procedures of SG36KTL-M. In no case shall this guide substitute for the user manual or related notes on

More information

Model PIV UL/FM Post Indicator Valve. Maintenance and Operation Manual UL/FM Post Indicator Valve Configuration AWWA C515

Model PIV UL/FM Post Indicator Valve. Maintenance and Operation Manual UL/FM Post Indicator Valve Configuration AWWA C515 Model 2010 -PIV UL/FM Post Indicator Valve Maintenance and Operation Manual UL/FM Post Indicator Valve Configuration AWWA C515 2 LAYOUT AND SITING At the design stage, it should be considered where valves

More information

BRAKE WINCH RUP 503-[T/BT] EQUIPMENT FOR LIFTING LOADS. AT 053-[T/BT] xx

BRAKE WINCH RUP 503-[T/BT] EQUIPMENT FOR LIFTING LOADS. AT 053-[T/BT] xx Reference number: BRAKE WINCH RUP 503-[T/BT] EQUIPMENT FOR LIFTING LOADS DESIGNATED USE The brake winch RUP 503-[...]T series is a load lifting / lowering device. Device is equipped with safety brake for

More information

Please visit our website at and leave your comments.

Please visit our website at   and leave your comments. We promise our customers the best services and premium quality products with value. MODIFY and its logo are registered trademarks. Please visit our website at www.modify.com.tw and leave your comments.

More information

Mini Glider Manual. Your Glider comes partially assembled. The front wheel and the handlebars require assembly.

Mini Glider Manual. Your Glider comes partially assembled. The front wheel and the handlebars require assembly. Mini Glider Manual Congratulations on your purchase of the Mini Glider! Your glider is designed for years of nearly carefree use by your child. These instructions include how to set up your glider and

More information

Tube Cutter with Measuring tape built-in

Tube Cutter with Measuring tape built-in http://www.pisco.co.jp TUBE MAKE-TO-ORDER PRODUCTS Cutter with Measuring tape built-in 658 Series Cutter TUBE VALVE CONTROLLER FITTING Model Code of Cutter (Example) Cutter Model Code of Cutter Blade (Example)

More information

OPERATING INSTRUCTIONS (Translation) Rope Winch Type , , ,75

OPERATING INSTRUCTIONS (Translation) Rope Winch Type , , ,75 OPERATING INSTRUCTIONS (Translation) Rope Winch Type 4202.0,5 4585.0,5 4585.0,75 GB The length of the rope is correct if: 1. User groups Duties Operator Operation, visual inspection Specialist Assembly,

More information

DBI SALA Confined Space Rescue Davit System

DBI SALA Confined Space Rescue Davit System Instructions for the following series products: Rescue Davit System (See back page for specific model numbers.) User Instruction Manual For Davit Rescue System This manual should be used as part of an

More information

Model No Product Name Handpiece Only Complete System

Model No Product Name Handpiece Only Complete System Ney QC 700 E 30,000 RPM IECE 30,000 R N HANDPIE IVEN HA R DRIV AIR D Owner & Operator's Manual Model No Product Name 7201326 Handpiece Only 7201325 Complete System Description Page Safety... 2 Setup...

More information

LIQUID LEVEL GAUGE FOR WELDING ZGAU 716 O&M, 717 O&M, 718 O&M, 719 O&M

LIQUID LEVEL GAUGE FOR WELDING ZGAU 716 O&M, 717 O&M, 718 O&M, 719 O&M LIQUID LEVEL GAUGE FOR WELDING ZGAU 7 O&M, 77 O&M, 78 O&M, 79 O&M Edition: 07/0 Date: 0.07.0 GO WITH OUR FLOW SPIS TREŚCI. Introduction. Construction. Installation. Installation of liquid level gauge of

More information

Operating instructions

Operating instructions Operating instructions Airlock MPSN-MS (-Ex) Original operating instructions Table of contents 1 Important information 5 1.1 Scope of validity... 5 1.2 Applicable documents... 5 1.3 Contact... 5 1.3.1

More information

Contents. Operating instructions. Pressure switch, heavy-duty version Model PSM-520

Contents. Operating instructions. Pressure switch, heavy-duty version Model PSM-520 Operating instructions Contents EN Pressure switch, heavy-duty version Model PSM-520 1. General information 2. Design and function 3. Safety 4. Transport, packaging and storage 5. Commissioning, operation

More information

Operating manual Mobile Man Anchor IM-200 Reference No. IM 200

Operating manual Mobile Man Anchor IM-200 Reference No. IM 200 Operating manual Mobile Man Anchor IM-200 Reference No. IM 200 EN 795:1996 class E Table of contents: 1. Description of the Mobile Man Anchor... 2 2. Construction of the Mobile Man Anchor.... 3 3. Technical

More information

60 Drum Style Spike Aerator

60 Drum Style Spike Aerator 60 Drum Style Spike Aerator OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

Assembly Instructions & Manual. Configuration subject to change

Assembly Instructions & Manual. Configuration subject to change Assembly Instructions & Manual Configuration subject to change O R Y X II A S S E M B L Y I N S T R U C T I O N S & M A N U A L IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read

More information