Nominal Wall Thickness Steel Only in. (mm) Outside Diameter With PVC in. (mm)

Size: px
Start display at page:

Download "Nominal Wall Thickness Steel Only in. (mm) Outside Diameter With PVC in. (mm)"

Transcription

1 PVC-Coated Conduit The ultimate in corrosion protection! OCAL-BLUE Conduit Hot-dip galvanized steel or aluminum conduit. Nominal.00 ( mils) blue urethane coating on interior. Hot-dipped galvanized threads (steel). Minimum.00 (0 mils) PVC coating on exterior. Colour-coded thread protectors. Couplings shipped with conduit are packaged separately. COND/- COND/- COND- Aluminum COND/SA- COND/SA- CONDSA- COND-/- COND-/SA- COND-/- COND-/SA- COND- CONDSA- COND- CONDSA- COND- CONDSA- COND-/- COND-/SA- COND- *COND- *COND- CONDSA- CONDSA- CONDSA- Metric size designator (ANSI C80.-99). Pipe Size In. / () / () (7) -/ () -/ () () () -/ (9) (0) (9) () Outside Diameter 0.8 (.0).0 (.70). (.0). (.0).90 (8.0).8 (0.0).88 (7.00).0 (88.90).00 (0.0).0 (.0). (.0). (8.0) Outside Diameter With PVC 0.9 (.0). (8.70).0 (.0).7 (.0).98 (0.0). (.0).9 (7.00).8 (90.90).08 (0.0).8 (.0). (.0).7 (70.0) Nominal Wall Thickness 0.0 (.) 0. (.7) 0. (.0) 0. (.7) 0. (.0) 0. (.70) 0.9 (.90) 0. (.0) 0. (.) 0. (.7) 0. (.) 0.7 (.7) Nominal Wall Thickness With PVC 0. (.).7 (.7) 0.7 (.) 0.7 (.9) 0.8 (.) 0.9 (.7) 0. (.9) 0. (.) 0. (.7) 0.7 (.7) 0.9 (7.) 0. (7.87) Nominal Inside Diameter 0. (.0) 0.8 (.0).0 (7.00).9 (.0). (.0).08 (.90).9 (.0).09 (78.0).7 (90.70).0 (0.90).07 (8.90).09 (.80) Cross Section Area in Square 0.0 (7.7) 0. (.) 0.8 (.9).0 (7.97).0 (.7). (8.).80 (.) 7.9 (87.80) 9.87 (0.0).7 (.) 0.0 (08.) 8.89 (7.8) File #0787 Length Without Couplings ft. (m) 9 -/ (.0) 9 -/ (.0) 9 (.0) 9 (.0) 9 (.0) 9 (.0) 9 0-/ (.0) 9 0-/ (.0) 9 0-/ (.00) 9 0-/ (.00) 9 0 (.00) 9 0 (.00) Minimum Weight Per Foot lb. (KG) 0.79 (.8).0 (7.). (9.0).0 (9.7).0 (.9). (0.0).7 (9.0).8 (09.) 8. (7.9) 9.7 (.0). (9.8) 7. (79.7) Size Material Colour COND / - = space for colour identifier Blank = G = Grey SA = Aluminum W = White COND/-G is / steel conduit coated in grey PVC. R = Red Custom colours also available - Std. m quantities are 9

2 PVC-Coated Conduit Couplings Corrosion-protected connections for conduit sections. OCAL-BLUE Couplings Nominal.00 ( mils) blue urethane coating on interior and threads. Minimum.00 (0 mils) PVC coating bonded to exterior. Couplings have straight threads (NPS), not tapered. Molded ribs on outer coating for easy installation (up to and including trade size). Couplings have pressure-sealing sleeves to protect your connection. CPL/- CPL/- CPL- CPL-/- CPL-/- CPL- CPL- CPL- CPL-/- CPL- *CPL- *CPL- Aluminum CPL/SA- CPL/SA- CPLSA- CPL-/SA- CPL-/SA- CPLSA- CPLSA- CPLSA- CPL-/SA- CPLSA- CPLSA- CPLSA- Metric size designator (ANSI C80.-99). Coupling Size / () / () (7) -/ () -/ () () () -/ (9) (0) (9) () Size Material Colour CPL / - CPLSA-B is aluminum coupling coated in blue PVC. = space for colour identifier Blank = G = Grey SA = Aluminum W = White R = Red Custom colours also available - Std. m quantities are Minimum Length of Metal.0 (8.0). (8.9).9 (8.).9 (8.).9 (8.).9 (9.9).88 (7.0).0 (7.98).09 (78.8).9 (80.97).7 (8.9). (87.9) Total Minimum Length Including Sleeve.7 (9.).7 (9.).9 (9.70).0 (9.70).7 (.0).9 (0.79).88 (7.70) 7.0 (78.8) 7.09 (80.8) 7.9 (8.7) 7.7 (87.9) 7. (88.89) File #0787 Weight lb./kg 0. (0.) 0.9 (0.8) 0. (0.) 0. (.9) 0. (.) 0.77 (.).8 (.8).70 (.).78 (.70).08 (.9).00 (.) 8.00 (.0) 0

3 OCAL-BLUE Double-Coat Split Couplings PVC-Coated Conduit Split Couplings and Nipples Join threaded conduit where you can t use a standard coupling. Split couplings serve as speed unions for cost-effective joining of two separate lengths of threaded conduit. Like other Ocal TM fittings, they're double coated in urethane and PVC to safeguard your entire conduit system against corrosion. Malleable iron construction. Nominal.00 ( mils) blue urethane on both interior and exterior. Minimum.00 (0 mils) PVC bonded to exterior. Stainless steel hardware included. TCC- = space for colour identifier G = Grey W = R = White Red Speed up your field installations with pre-threaded conduit nipples! OCAL-BLUE Nipples Made from Ocal TM PVC-coated steel or aluminum conduit. urethane coating over threads. Colour Custom colours also available - Std. m quantities are required. Please contact your Regional Sales Office. NOTE The use of standard couplings is recommended whenever possible over the use of split couplings, because standard couplings provide better overall corrosion protection. Nominal.00 ( mils) blue urethane on interior. Minimum.00 (0 mils) PVC coating on exterior. Colour-coded thread protectors for easy identification of conduit size. Available in standard lengths close and to with custom lengths available on request. Close nipples are coated only in urethane. TCC- TCC- TCC- TCC- TCC- TCC- Metric size designator (ANSI C80.-99). / () / () (7) -/ () -/ () () TCC7- TCC8- TCC9- TCC0- *TCC- *TCC- () -/ (9) (0) (9) () File #0787 Size X Length Material Colour NPL/X- Blank = = space for colour identifier SA = Aluminum G = Grey W = White NPL/X-G is / x long steel nipple coated in grey PVC. R = Red Custom colours also available - Std. m quantities are

4 PVC-Coated Conduit Nipples OCAL-BLUE NIPPLES (continued) PVC-Coated Conduit Nipples / () / () (7) -/ () -/ () () () -/ (9) (0) * (9) * () Close (0.8) (.) (7.) PVC-Coated Conduit Nipples Aluminum / () / () (7) -/ () -/ () () () -/ (9) (0) * (9) * () -/ (88.9) Nipple Length (0.) (7.0) (.) 8 (0.) 0 (.0) (0.8) CLNPL/- NPL/X- NPL/X/- NPL/X- NPL/X/- NPL/X- NPL/X- NPL/X- NPL/X8- NPL/X0- NPL/X- CLNPL/- NPL/X- NPL/X/- NPL/X- NPL/X/- NPL/X- NPL/X- NPL/X- NPL/X8- NPL/X0- NPL/X- CLNPL- NPLX- NPLX/- NPLX- NPLX/- NPLX- NPLX- NPLX- NPLX8- NPLX0- NPLX- CLNPL/- NPL/X- NPL/X/- NPL/X- NPL/X/- NPL/X- NPL/X- NPL/X- NPL/X8- NPL/X0- NPL/X- CLNPL/- NPL/X- NPL/X/- NPL/X- NPL/X/- NPL/X- NPL/X- NPL/X- NPL/X8- NPL/X0- NPL/X- CLNPL- NPLX/- NPLX- NPLX/- NPLX- NPLX- NPLX- NPLX8- NPLX0- NPLX- CLNPL/- NPL/X/- NPL/X- NPL/X- NPL/X- NPL/X8- NPL/X0- NPL/X- CLNPL- NPLX/- NPLX- NPLX- NPLX- NPLX8- NPLX0- NPLX- CLNPL/- NPL/X- NPL/X- NPL/X- NPL/X8- NPL/X0- NPL/X- CLNPL- NPLX- NPLX- NPLX- NPLX8- NPLX0- NPLX- CLNPL- NPLX- NPLX- NPLX8- NPLX0- NPLX- CLNPL- NPLX- NPLX- NPLX8- NPLX0- NPLX- Close (0.8) (.) (7.) -/ (88.9) Nipple Length (0.) CLNPL/SA- NPL/XSA- NPL/X/SA- NPL/XSA- NPL/X/SA- NPL/XSA- NPL/XSA- NPL/XSA- NPL/X8SA- NPL/X0SA- NPL/XSA- CLNPL/SA- NPL/XSA- NPL/X/SA- NPL/XSA- NPL/X/SA- NPL/XSA- NPL/XSA- NPL/XSA- NPL/X8SA- NPL/X0SA- NPL/XSA- (7.0) (.) 8 (0.) File # (.0) (0.8) CLNPLSA- NPLXSA- NPLX/SA- NPLXSA- NPLX/SA- NPLXSA- NPLXSA- NPLXSA- NPLX8SA- NPLX0SA- NPLXSA- CLNPL/SA- NPL/XSA- NPL/X/SA- NPL/XSA- NPL/X/SA- NPL/XSA- NPL/XSA- NPL/XSA- NPL/X8SA- NPL/X0SA- NPL/XSA- CLNPL/SA- NPL/XSA- NPL/X/SA- NPL/XSA- NPL/X/SA- NPL/XSA- NPL/XSA- NPL/XSA- NPL/X8SA- NPL/X0SA- NPL/XSA- CLNPLSA- NPLX/SA- NPLXSA- NPLX/SA- NPLXSA- NPLXSA- NPLXSA- NPLX8SA- NPLX0SA- NPLXSA- CLNPL/SA- NPL/X/SA- NPL/XSA- NPL/XSA- NPL/XSA- NPL/X8SA- NPL/X0SA- NPL/XSA- CLNPLSA- NPLX/SA- NPL/XSA- NPLXSA- NPLXSA- NPLX8SA- NPLX0SA- NPLXSA- CLNPL/SA- NPL/XSA- NPL/XSA- NPL/XSA- NPL/X8SA- NPL/X0SA- NPL/XSA- CLNPLSA- NPLXSA- NPLXSA- NPLXSA- NPLX8SA- NPLX0SA- NPLXSA- CLNPLSA- NPLXSA- NPLXSA- NPLX8SA- NPLX0SA- NPLXSA- CLNPLSA- NPLXSA- NPLXSA- NPLX8SA- NPLX0SA- NPLXSA- Metric size designator (ANSI C80.-99).

5 PVC-Coated Conduit Elbows Factory bent to save time and materials! OCAL-BLUE Standard-Radius Elbows Fabricated from Ocal TM PVC-coated conduit. Standard radius in 0,, 0 and 90 available for immediate shipment. Colour-coded thread protectors for easy identification of conduit size. Special radius and degrees not listed are also available upon request. ELL/-- ELL/-- ELL-- ELL-/-- ELL-/-- ELL-- ELL-- ELL-- ELL-/-- ELL-- *ELL-- *ELL-- Radius R Offset C Straight End D Aluminum ELL/--SA- ELL/--SA- ELL--SA- ELL-/--SA- ELL-/--SA- ELL--SA- ELL--SA- ELL--SA- ELL-/--SA- ELL--SA- ELL--SA- ELL--SA- Metric size designator (ANSI C80.-99). / () / () (7) -/ () -/ () () () -/ (9) (0) (9) ().00 (0.0).0 (.0).7 (.0) 7. (8.) 8. (09.) 9.0 (.0) 0.0 (.70).00 (0.0).00 (8.00).00 (0.0).00 (09.0) 0.00 (7.00) Pipe Size.00 (.0).0 (.0) 8.00 (0.0) 9.0 (.0).00 (79.0).00 (0.0).00 (.0).0 (9.0) 0.7 (7.0).7 (.).00 (787.0) 9.00 (990.0).00 (0.80).00 (0.80). (7.). (7.).7 (9.8).0 (88.90).0 (88.90).0 (88.90).7 (.0).7 (.0) 7.00 (77.80) 9.00 (8.0) Angle Material Colour ELL /- - - Unbent Length 0.8 (.9).07 (8.). (.7).89 (0.) 8. (8.8).9 (.8).9 (9.7) 7. (9.8).0 (890.7). (90.7).70 (.). (.) 0 = 0º Blank = G = Grey File #0787 Weight Each lb. (kg) 0.7 (.9) 0.9 (.07).77 (.97). (.80).98 (0.). (0.8) 9. (.09). (9.77).0 (9.8) 9.8 (7.80) 0.8 (.89) 8.9 (7.) = º SA = Aluminum W = White 0= 0º Blank = 90º R = Red ELL/SA-W is a / trade size 90º aluminum elbow coated in white PVC. Custom colours also available - Std. m quantities are

6 PVC-Coated Conduit Elbows Choose the size and angle to meet your exact requirements. OCAL-BLUE Large-Radius Elbows Fabricated from Ocal TM PVC-coated conduit. Standard radius in 90 available for immediate shipment. Special radius and degrees not listed are also available upon request. Colour-coded thread protectors for easy identification of conduit size. LRELLX-- LRELLX-- LRELLX8-- LRELLX-- LRELLX0-- LRELLX-- LRELLX-- LRELLX8-- LRELLX0-- Aluminum Metric size designator (ANSI C80.-99). # and inch not CSA certified. LRELLX--SA- LRELLX--SA- LRELLX8--SA- LRELLX--SA- LRELLX0--SA- LRELLX--SA- LRELLX--SA- LRELLX8--SA- LRELLX0--SA- - (7- ) - (7-78) - (7-0) - (7-0) - (7 - ) - (7 - ) - (7 - ) - (7 - ) - ( - ) Pipe Size Radius R Offset C Straight End D.00 (0.80).00 (8.00) 8.00 (7.0).00 (09.0) 0.00 (7.00).00 (9.0).00 (0.80) 8.00 (9.0) 0.00 (.00) ' 9 (.0) ' 0 (09.0) ' (7.0) ' (889.00) ' (0.0) ' (9.80) ' (7.0) ' 0 (.00) ' 0 (88.80) Radius Angle Material Colour LRELLX (8.0) 9.00 (8.0) 0.00 (.00).00 (79.0).00 (79.0).00 (79.0).00 (0.80).00 (0.80).00 (0.80) = 0 = 0º Blank = G = Grey File #0787 Unbent Length ' 0 (9.0) ' (0.80) ' 0 (9.0) ' (98.0) ' 9 (7.0) ' (98.0) 7' (8.00) 8' (90.80) 9' 0 (997.0) = = º SA = Aluminum W = White etc. 0 = 0º Blank = 90º R = Red LRELLX8--G is a trade size steel elbow with a radius of 8 and an angle of º, coated in grey PVC. Custom colours also available - Std. m quantities are required. Please contact your Regional Sales Office.

7 Ocal PVC-Coated Beam Clamps and U-Bolts PVC-Coated Conduit Clamps and Straps PVC coating evenly molded around saddle prevents exposure of metal an Ocal TM exclusive! Beam clamps support and attach conduit runs to structural beams. Molded right-angle beam clamps and U-bolts provide extra protection. Nuts are encapsulated, (RA) providing complete protection. Hex-shaped nuts fit standard wrenches. Stainless steel hardware included. Parallel (PAR) and edge (EC) clamps feature nominal.0 ( mils) PVC coating for corrosion protection. Right-Angle clamps (RA) and U-Bolts (UB) feature nominal.00 (0 mils) PVC coating for corrosion protection. The coating is evenly molded around the saddle which only Ocal TM provides to prevent exposure to metal. Parallel (PAR) A U-Bolt (UB) Size RA- UB- = space for colour identifier G = W = Right Angle (RA) Grey White Colour Custom colours also available - Std. m quantities are PVC-Coated Beam Clamps = space for colour identifier G = Grey W = White Colour Custom colours also available - Std. m quantities are Right Angle Parallel Edge RA/- PAR/- EC/- / () RA/- PAR/- EC/- / () RA- PAR- EC- (7) RA-/- PAR-/- EC-/- -/ () RA-/- PAR-/- EC-/- -/ () RA- PAR- EC- () RA- PAR- () RA- PAR- RA-/- PAR-/- -/ (9) RA- PAR- (0) U-Bolts Edge (EC) A Dimension UB/- / ().8 (.9) UB/- / (). (9.9) UB- (7).8 (.8) UB-/- -/ ().9 (.) UB-/- -/ ().0 (.0) UB- ().97 (7.) UB- ().7 (88.) UB-.09 (0.98) UB-/- -/ (9).9 (.8) UB- (0).09 (9.8) UB- (9). (8.8) UB- () 8.00 (0.0) Metric size designator (ANSI C80.-99). O

8 Conduit Clamps and Straps Support conduit on walls and structures. Pipe Straps PVC-Coated Pipe Straps Available in malleable iron/stamped steel with nominal.0 ( mils) PVC coating in your choice of blue, white or grey. Choose one- or two-hole versions. Sized to allow for the extra thickness of the PVC coating. CB/- CB/- CB- CB-/- CB-/- CB- CB- CB- CB-/- CB- Metric size designator (ANSI C80.-99). Two-Hole PVC-Coated Pipe Strap / () / () (7) -/ () -/ () () () -/ (9) (0) One-Hole PVC-Coated Pipe Strap One-Hole Malleable Iron HMS/- HMS/- HMS- HMS-/- HMS-/- HMS- HMS- HMS- HMS-/- HMS- Two-Hole Stamped HS/- HS/- HS- HS-/- HS-/- HS- HS- HS- HS-/- HS- Use as spacers with one-hole pipe straps. Ocal PVC-Coated Clamp-Back Spacers Provides space for air flow between conduit and mounting surface. Metric size designator (ANSI C80.-99). Nominal.0 ( mils) PVC coating for corrosion protection. CB- = space for colour identifier G = Grey W = R = White Red / () / () (7) -/ () -/ () () () -/ (9) (0) Colour Custom colours also available - Std. m quantities are

Galvanized Rigid Conduit

Galvanized Rigid Conduit Galvanized Rigid Conduit Conforms To: C80.1 - UL 6 ANSI C-80.1 UL Min. WGT. Per 100 Feet in LBS. INCL. CP. O.D. I.D. Thickness Threads Per Inch Feet Per Lift Color Code Thread Protector 1/2" 79.840.632.104

More information

ECP Series Explosionproof Enclosures for OEM Applications. Optimized design, extensive sizes, and fast lead times.

ECP Series Explosionproof Enclosures for OEM Applications. Optimized design, extensive sizes, and fast lead times. ECP Series Explosionproof Enclosures for OEM Applications Optimized design, extensive sizes, and fast lead times. ECP Series Explosionproof Enclosures, the latest addition to our portfolio of electrical

More information

Ford Service Saddles and Tapping Sleeves

Ford Service Saddles and Tapping Sleeves Section AA 5/2001 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487

More information

HANGERS & SUPPORTS CLIP-IT CLIP-IT STUD STRAPS BAR JOIST CLIP CONDUIT HANGERS CLIP-IT

HANGERS & SUPPORTS CLIP-IT CLIP-IT STUD STRAPS BAR JOIST CLIP CONDUIT HANGERS CLIP-IT 62 hangers & supports Innovation. It s what Madison is all about. Check out our Madison Strap, the product that started it all. Invented in 1929 by our founder Earl Adkinson, Madison has been on the cutting

More information

Foundation Products. Poured In Ground Anchor Bolts E1 - E4. Structural Foundations E5 - E12. Copyright 2016 s Industry Inc. SIE-RA-CMP EN

Foundation Products. Poured In Ground Anchor Bolts E1 - E4. Structural Foundations E5 - E12. Copyright 2016 s Industry Inc. SIE-RA-CMP EN Foundation Products Poured In Ground Anchor Bolts E1 - E4 Structural Foundations E5 - E12 EA EB Poured in Ground Anchor Bolts Layout SIEMENS Anchor Bolts 131702-4X shown for reference purposes only! Actual

More information

PVC Coated Rigid Metal Conduit PM REASONS TO CHOOSE PERMA-COTE GO FOR THE GREEN!

PVC Coated Rigid Metal Conduit PM REASONS TO CHOOSE PERMA-COTE GO FOR THE GREEN! PVC Coated Rigid Metal Conduit PM-111 7 REASONS TO CHOOSE PERMA-COTE GO FOR THE GREEN! Product Performance 1 Reason One Seven reasons why you should trust the proven value of Perma-Cote PVC-coated galvanized

More information

ASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.

ASYBCO 90 O ELBOW LONG RADIUS O.D. I.D. 90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds

More information

SPIRAL PIPE - OVAL SINGLE WALL

SPIRAL PIPE - OVAL SINGLE WALL SPIRAL PIPE - OVAL SINGLE WALL Duct Direct Pipe and Fittings are manufactured in accordance with 2005 SMACNA Duct Construction Standards (1995 SMACNA Standards on request) OVAL SUBMITTAL Oval Single Wall

More information

WELL COMPLETION & PROTECTION. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD

WELL COMPLETION & PROTECTION. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD WELL COMPLETION & PROTECTION MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com WELL COMPLETION & PROTECTION TABLE OF CONTENTS TABLE OF CONTENTS (FLUSHMOUNTS)... 2-5 MONITORING

More information

TorqBolt Wedge Anchors Torque Controlled Expansion Anchor

TorqBolt Wedge Anchors Torque Controlled Expansion Anchor TorqBolt Wedge Anchors Torque Controlled Expansion Anchor Product Description The Torqbolt wedge anchor is a torque-controlled, wedge expansion anchor for heavy duty fastening applications where high pull

More information

EPOXY FITTINGS DIMENSIONS

EPOXY FITTINGS DIMENSIONS Bulletin No. A150 May 1, 2004 EPOXY FITTINGS DIMENSIONS 2"-16" GREEN THREAD fittings may be used with GREEN THREAD and RED THREAD II piping. Refer to Chemical Resistance Guide, Bulletin No. E5615, for

More information

300lb MALLEABLE FITTINGS

300lb MALLEABLE FITTINGS NIPPLES & FITTINGS MLLEBLE FITTINGS MLLEBLE FITTINGS MLLEBLE FITTINGS ISO 9002 - CERTIFICTE OF QULITY - UL/ LISTED ND PPROVED T 300 PSI Our quality fittings are made with care and attention to detail.

More information

PRODUCTS CATALOG

PRODUCTS CATALOG 2017-2018 PRODUCTS CATALOG THE BROADEST LINE OF QUALITY ELECTRICAL FITTINGS & TUBULAR PRODUCTS PLUS THE BEST PERFORMANCE GUARANTEE IN THE INDUSTRY ABOUT US Electroline is committed to manufacturing quality

More information

Section GATE VALVES

Section GATE VALVES Section 02521 PART 1 GENERAL 1.01 SUMMARY This Section includes the furnishing and installation of gate valves for isolation and dead-end service as shown on Plans and as specified herein. 1.02 MEASUREMENT

More information

ECP Series Explosionproof Enclosures for OEM Applications. Optimized design, extensive sizes, and fast lead times.

ECP Series Explosionproof Enclosures for OEM Applications. Optimized design, extensive sizes, and fast lead times. ECP Series Explosionproof Enclosures for OEM Applications Optimized design, extensive sizes, and fast lead times. ECP Series Explosionproof Enclosures, the latest addition to our portfolio of electrical

More information

TABLE OF CONTENTS. Throughout the catalog you will notice blue highlighted items. These are the most frequently ordered BURNDY Products.

TABLE OF CONTENTS. Throughout the catalog you will notice blue highlighted items. These are the most frequently ordered BURNDY Products. BURNDY Products Hardware TABLE OF CONTENTS DURIUM Hardware Bolts............................ D-2 Nuts............................. D-3 Flat Washer....................... D-3 Split Lockwasher...................

More information

TUBE SIGN POST PRODUCTS

TUBE SIGN POST PRODUCTS Western Canada TUBE Products Ltd. SIGN POST PRODUCTS Company Profile With over 100 years of experience on staff and the largest inventory in Western Canada, we have the ability to meet all your sign support

More information

Speed control assembly model A-1

Speed control assembly model A-1 Pressure Regulation 533a 1. DESCRIPTION The Viking Speed Control Assembly provides adjustment of the opening speed of Viking Deluge Valves, and adjustment of both the opening and closing speed of Viking

More information

Precision Duct Systems 4570 Commerce Cir SW Atlanta, GA Phone (404)

Precision Duct Systems 4570 Commerce Cir SW Atlanta, GA Phone (404) Project Name: Engineer: Contractor: Section Number: Date Submitted: Date Approved: Pressure Class: Material Type: Connections: 2005 Up to 10 wg 1995 2 wg pos 1995 4 wg pos 1995 10 wg 2005 neg WG: 1995

More information

GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS

GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS CONTINENTAL INDUSTRIES, INC. The Ultimate Connection CONTINENTAL INDUSTRIES, INC. ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, Inc.,

More information

Superstrut. Metal Framing. Surface Raceway and Lighting Systems

Superstrut. Metal Framing. Surface Raceway and Lighting Systems Material Superstrut electrical raceway, fixture hanging channel, closure strip and accessories are manufactured from hot rolled strip steel. Standard finish for the accessories is GoldGalv. Design Data

More information

AMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS

AMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS AMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS DESIGNED TO HOLD THE WEIGHT FOR ELECTRICAL CABLE AS IT HANGS IN VERTICAL, SLOPING OR HORIZONTAL POSITIONS. EASILY INSTALLED AND REMOVED USING NO

More information

Team Insert Valve Sample Specification The Insert Valve shall conform to the following:

Team Insert Valve Sample Specification The Insert Valve shall conform to the following: Team Insert Valve Sample Specification The Insert Valve shall conform to the following: The Ductile Iron 250 p.s.i.g. Insert Valve shall be a Resilient Wedge Gate Valve designed for use in potable water,

More information

List of Figures. List of Tables

List of Figures. List of Tables City of Columbia Engineering Regulations PART 19: SPECIFICATIONS FOR FENCING MATERIALS Table of Contents Paragraph Description Page No. 19.1 General 19-1 19.2 Construction Materials 19-1 List of Figures

More information

CHAIN LINK FENCE GATE

CHAIN LINK FENCE GATE WALCOOM Walcoom Corporation CHAIN LINK FENCE GATE Chain link fence gate is a versatile product in many aspects, here, Walcoom provides buyers with sufficient strength and durability chain link fence gate

More information

D. ACCESSORIES ADAPTER KITS IMPELLER & SEAL INSTALLATION TOOLS CARRYING HANDLES & LIFT CORDS GALVANIC PROTECTION KITS MUSHROOM STRAINER

D. ACCESSORIES ADAPTER KITS IMPELLER & SEAL INSTALLATION TOOLS CARRYING HANDLES & LIFT CORDS GALVANIC PROTECTION KITS MUSHROOM STRAINER . ACCESSORIES AAPTER KITS IMPELLER & SEAL INSTALLATION TOOLS CARRYING HANLES & LIFT CORS GALVANIC PROTECTION KITS MUSHROOM STRAINER SLUGE STRAINERS NEMA 4 WATERTIGHT CONTROL & UAL LEVEL CONTROL (Replaces

More information

QUALITY ALUMINUM BOAT LIFTS, INC. INSTRUCTIONS. Dominator Lake Lift

QUALITY ALUMINUM BOAT LIFTS, INC. INSTRUCTIONS. Dominator Lake Lift INSTRUCTIONS Dominator Lake Lift PHONE:251-986-3882 * FAX:251-986-3136 QABLDOMINATORINST.2014 P a g e 1 Quality Aluminum Boat Lifts, INC. Installation Instructions: Dominator Lake Lift Thank you for your

More information

Quality Plastic Pipe Fittings. Technical Data. Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed

Quality Plastic Pipe Fittings. Technical Data. Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed Quality Plastic Pipe Fittings Technical Data Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed Effective April 1, 2002 PIPE DIMENSIONS IPS-IRON PIPE SIZE Minimum

More information

WEDGE-ALL Wedge Anchors

WEDGE-ALL Wedge Anchors WEDGE-ALL Wedge Anchors The Wedge-All wedge anchors are a non-bottom bearing, wedge-style expansion anchor for use in solid concrete or grout-fi lled masonry. A one-piece clip ensures uniform holding capacity

More information

SECTION BUTTERFLY VALVES

SECTION BUTTERFLY VALVES SECTION 15112 BUTTERFLY VALVES PART 1 GENERAL 1.01 SUMMARY A. All butterfly valves shall be of the tight closing, rubber seated type and fully comply with the latest revision of AWWA Standard C504, Class

More information

Nominal O.D. SERIES 110FW. 64mm 89mm 114mm 168mm 222mm 276mm 330mm 391mm 445mm 498mm 552mm

Nominal O.D. SERIES 110FW. 64mm 89mm 114mm 168mm 222mm 276mm 330mm 391mm 445mm 498mm 552mm (DN25) 1.5" (DN40) (DN100) (DN150) (DN200) (DN250) (DN300) 1 (DN350) (DN400) 1 (DN450) (DN500) 2 (DN600) 3 (DN900) 4 (DN1200) 5 (DN1350) O.D. 2.50" 10.8 15.3 43.3 64mm 1 C 2 2 2 L Minimum L 0.7 1.0 1.3

More information

l DESCRIPTION l FEATURES l LIMITATIONS l TYPICAL APPLICATIONS l MATERIAL SPECIFICATIONS TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6

l DESCRIPTION l FEATURES l LIMITATIONS l TYPICAL APPLICATIONS l MATERIAL SPECIFICATIONS TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6 www.ucanfast.com TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6 l DESCRIPTION The UCAN WAG anchor is a fully threaded torque controlled expansion anchor assembled with a three segment expansion clip. All parts

More information

Vertical and Horizontal Bladder Tanks

Vertical and Horizontal Bladder Tanks DATA SHEET Vertical and Horizontal Tanks Application The ANSUL bladder tank is one component in a balanced pressure proportioning system. Its operation requires no external power other than a pressurized

More information

MUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.

MUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5. Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read

More information

Encore PE 50-lb Feed Hopper

Encore PE 50-lb Feed Hopper Instruction Sheet P/N 160429-01 Encore PE 50-lb Feed Hopper WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related

More information

S Surge Arresters

S Surge Arresters Surge Arresters UltraSIL Polymer-Housed VariSTAR Type US, UH, and UX Station-Class Surge Arresters Installation and Maintenance Instructions Service Information S235-88-1 Contents Product Information...........................1

More information

Submittal / Substitution Request

Submittal / Substitution Request Submittal / Substitution Request SUBMITTED TO: To: Firm: Project: Submitted Product: SIMPSON STRONG-TIE WEDGE-ALL WEDGE ANCHOR Specified Product: Section: Page: Detail/Sheet No.: Description of Application:

More information

Materials: Rigid PVC body, PVC end plugs, PVC reinforcement cuff, Stainless steel cuff bands

Materials: Rigid PVC body, PVC end plugs, PVC reinforcement cuff, Stainless steel cuff bands PVC PRESSURE VESSELS AMI.5 DIAMETER, 00 PSI, U-PIN STYLE Attractive.5 PVC pressure vessels available for 14, 1 & 40 length membranes. This style is designed for direct connection to /Applied Membranes

More information

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant). Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)

More information

Horizontal Bladder Tanks

Horizontal Bladder Tanks DATA SHEET Horizontal Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)

More information

SLEEVED PLUG VALVES 2-WAY

SLEEVED PLUG VALVES 2-WAY Specialty Valves 2-WAY ANSI/ASME CLASS 150 LBS Dimensions to ANSI B16.5 & B16.10 1 Six (6) top holes * 2 1/2 valves are made from 3 casting, but flanges are machined to 2 1/2 dimensions 1/2 4.25 108.00

More information

SLEEVED PLUG VALVES 2-WAY

SLEEVED PLUG VALVES 2-WAY Specialty Valves 2-WAY ANSI/ASME CLASS 150 LBS Dimensions to ANSI B16.5 & B16.10 1 Six (6) top holes * 2 1/2 valves are made from 3 casting, but flanges are machined to 2 1/2 dimensions 1/2 4.25 108.00

More information

Seamax Boat Bimini Top User Manual

Seamax Boat Bimini Top User Manual Seamax Boat Bimini Top User Manual Size A / B / C 3 BOW Size D / E / F 4 BOW Thanks for your purchase. Seamax Bimini Top has built-in the aluminum eye-end fitting to install on standard oar lock pin (diameter

More information

M2 Antenna Systems, Inc. Model No: VLP16

M2 Antenna Systems, Inc. Model No: VLP16 M2 Antenna Systems, Inc. Model No: 100-600VLP16 SPECIFICATIONS: Model... 100-600VLP16 Frequency Range... 100-600 MHz Cont. *Gain... 9.64 dbi Front to back... 12 db Typical Beamwidth... E=64 / H=70 Feed

More information

THREAD/SCREW - Drill & Tap Chart

THREAD/SCREW - Drill & Tap Chart Machine Screw THREAD/SCREW Drill & Tap Chart Threads Per Inch Min Dia Alum, Brass, & Plasitcs 75% Thread Tap Drills Stainless Steel, Steels & Iron 50% Thread Clearance Hole Drills Close Fit All Materials

More information

MODEL ANALOG ALTIMETER USER'S MANUAL 330KHZ, 1000M DEPTH RATED 0.2 TO 100FT OPERATING RANGE ANALOG OUTPUT

MODEL ANALOG ALTIMETER USER'S MANUAL 330KHZ, 1000M DEPTH RATED 0.2 TO 100FT OPERATING RANGE ANALOG OUTPUT MODEL 862-000-200 ANALOG ALTIMETER USER'S MANUAL 330KHZ, 1000M DEPTH RATED 0.2 TO 100FT OPERATING RANGE ANALOG OUTPUT DOCUMENT NO. 430-007H September 20, 2005 S/N IMAGENEX TECHNOLOGY CORP. 209-1875 BROADWAY

More information

IMPORTANT: RECEIVING INSTRUCTIONS:

IMPORTANT: RECEIVING INSTRUCTIONS: Instruction Sheet Sidewinder Mechanical Bender IMPORTANT: RECEIVING INSTRUCTIONS: Visually inspect all components for shipping damage. If any shipping damage is found, notify carrier at once.shipping damage

More information

SECURITY AND CONFIDENCE AT HEIGHT

SECURITY AND CONFIDENCE AT HEIGHT Detachable Cable Sleeve SECURITY AND CONFIDENCE AT HEIGHT THE ULTIMATE IN FALL PROTECTION THE DANGERS OF WORKING AT HEIGHT Every day, workers around the world climb ladders to great heights to get their

More information

Continental Industries TRANSITION FITTINGS or FAX Visit

Continental Industries TRANSITION FITTINGS or FAX Visit Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and

More information

OUTER RACE SHIM SPACERS METRIC OUTER RACE SHIM SPACERS. All Dimensions in Millimeters. Material:300 Series Stainless Steel

OUTER RACE SHIM SPACERS METRIC OUTER RACE SHIM SPACERS. All Dimensions in Millimeters. Material:300 Series Stainless Steel OUTER RACE SHIM SPACERS Material:300 Series Stainless Steel METRIC OUTER RACE SHIM SPACERS All Dimensions in Millimeters Material:300 Series Stainless Steel 6-16 INNER RACE SHAFT SPACERS 3 /32" To 1 /2"

More information

Side-of-Pole Mount for 1 Module (SPM1) For Module Type C

Side-of-Pole Mount for 1 Module (SPM1) For Module Type C Module Type Width Length C 22-27 56-63 Side-of-Pole Mount for 1 Module (SPM1) For Module Type C ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 022212-1 Side-of-Pole Mount

More information

PVC Electrical Fittings & Accessories Price List

PVC Electrical Fittings & Accessories Price List PVC Electrical Fittings & Accessories Price List Effective August 26, 2002 Electrical Products PVC Electrical Fittings & Accessories Price List PVC Electrical Standards 2 Schedule 40 Fittings: Couplings,

More information

Made in U.S.A. Narrow-U Bike Rack Heavy Duty Submittal Sheet. Materials: Finishes: Mount Options: Setbacks:

Made in U.S.A. Narrow-U Bike Rack Heavy Duty Submittal Sheet. Materials: Finishes: Mount Options: Setbacks: Submittal Sheet Materials: 2 Schedule 40 Steel Pipe (2.375 OD) Finishes: Galvanized An after fabrication hot dipped galvanized finish is available Powder Coat Our powder coat finish assures a high level

More information

Model MTB-ASME Horizontal Bladder Tanks

Model MTB-ASME Horizontal Bladder Tanks DATA SHEET Model MTB-ASME Horizontal Bladder Tanks Features n UL Listed and FM Approved for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure

More information

NHR-X-X Encore Feed Hoppers

NHR-X-X Encore Feed Hoppers Instruction Sheet P/N 60986-0 NHR-X-X Encore Feed Hoppers WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation.

More information

61R2 STANDARD REGULATOR COMPACT REGULATOR. Phone Fax

61R2 STANDARD REGULATOR COMPACT REGULATOR. Phone Fax 6R STANDARD REGULATOR COMPACT REGULATOR 496 Phone 7.63.888 Fax 7.63.690 6R AND 496 REGULATORS General Information The Model 6R and 496 Compact Regulator (CR) are designed to deliver reliable and safe regulation

More information

Superstrut. Metal Framing. Surface Raceway and Lighting Systems. Material. Design Data. Electrical Raceway

Superstrut. Metal Framing. Surface Raceway and Lighting Systems. Material. Design Data. Electrical Raceway Material Superstrut electrical raceway, fixture hanging channel, closure strip and accessories are manufactured from hot rolled strip steel. Standard finish for the accessories is GoldGalv. Design Data

More information

Football Equipment. 5 9/16" Gooseneck Goalposts

Football Equipment. 5 9/16 Gooseneck Goalposts 5 9/16" Gooseneck Goalposts Football Equipment FB55CG 5 9/16" Gooseneck College Goalposts Applies also to FB55CG-SY and FB55CG-WT Goalposts shall meet all NCAA rules. Goalposts shall be of the single bent

More information

Mini Channel & Fittings

Mini Channel & Fittings Our mini channels and fittings provide for an economical method of supporting light load requirements on a strut system. Channel Channels are cold formed on our modern rolling mills from 18 Ga. (1.2 mm)

More information

A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32

A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32 A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32 Component Flat Washers Component Flat Washers The Largest Selection in the World! Steel, Stainless Steel and Brass The standard Flatwasher

More information

Vertical Bladder Tanks

Vertical Bladder Tanks DATA SHEET Vertical Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)

More information

MLS Series Liquid Level Switches. Installation and Operations Manual Section 15

MLS Series Liquid Level Switches. Installation and Operations Manual Section 15 MLS Series Liquid Level Switches Installation and Operations Manual 00-02-0730 2012-11-11 Section 15 In order to consistently bring you the highest quality full featured products, we reserve the right

More information

MODEL DIGITAL ALTIMETER USER'S MANUAL 330KHZ, 1000M DEPTH RATED 0.5 TO 100FT (0.15 TO 30M) OPERATING RANGE SERIAL OUTPUT

MODEL DIGITAL ALTIMETER USER'S MANUAL 330KHZ, 1000M DEPTH RATED 0.5 TO 100FT (0.15 TO 30M) OPERATING RANGE SERIAL OUTPUT MODEL 863-000-200 DIGITAL ALTIMETER USER'S MANUAL 330KHZ, 1000M DEPTH RATED 0.5 TO 100FT (0.15 TO 30M) OPERATING RANGE SERIAL OUTPUT DOCUMENT NO. 430-017C April 14, 2005 S/N IMAGENEX TECHNOLOGY CORP. 209-1875

More information

CORPORATE SAFETY MANUAL

CORPORATE SAFETY MANUAL CORPORATE SAFETY MANUAL Procedure No. 32-0 Revision: Date: May 2005 Total Pages: 10 PURPOSE To provide general guidelines for the inspection of all ropes, chains, cables, slings, etc. used for personnel

More information

pvc well casing & drop pipe

pvc well casing & drop pipe C e r t a i nte e d pvc well casing & drop pipe P V C We l l P r o d u c t s Sure Fit PVC well casing and drop pipe have gained broad acceptance since their introduction almost 40 years ago. Today, due

More information

Bronze Fittings & Flanges Brass Nipples

Bronze Fittings & Flanges Brass Nipples CORPORTE OFFICE TEL (800) 766-0076 LOCL (323) 890-4455 FX (323) 890-4456 WWW.SMITHCOOPER.COM ronze Fittings & Flanges rass Nipples 125 lb ronze Threaded Fittings 90 Elbow 1/8 36E 1001C 0.54 - - 0.078 50

More information

Tapped Hole (.375) Tapped hole 15 (.594) (.391±.004) Frame 19±0.2 (.750±.008) 12.7±0.2 (.500±.008) 19±0.2 (.750±.008) R S 4 x Ø 5.4 (.

Tapped Hole (.375) Tapped hole 15 (.594) (.391±.004) Frame 19±0.2 (.750±.008) 12.7±0.2 (.500±.008) 19±0.2 (.750±.008) R S 4 x Ø 5.4 (. 434 Lift-off In-line Zinc can also be 31.5 19.1 (.750) For Lift-Off For on Lift-Off 1300 (300 lbf) 2200 (500 lbf) 56 T.P.I. (2.21) 31.5 19.1 (.750) Tapped hole Ø 9.5 (.375) ultimate 3300 (750 lbf) 9300

More information

Tower Accessories & Hardware

Tower Accessories & Hardware Safety-Climb Cable System for Climbing Ladder These Safety-Climb Cable products clamp to climbing ladder rungs up to 1-1/4" (32 mm) in diameter. The products meet or exceed OSH requirements for climbing

More information

Moai Bike Rack Heavy Duty Submittal Sheet. Materials: 2.0 Schedule 40 Pipe (2.375 OD) Finishes: Capacity: Mount Options: Setbacks: 2 Bikes

Moai Bike Rack Heavy Duty Submittal Sheet. Materials: 2.0 Schedule 40 Pipe (2.375 OD) Finishes: Capacity: Mount Options: Setbacks: 2 Bikes Submittal Sheet Materials: 2.0 Schedule 40 Pipe (2.375 OD) Finishes: Galvanized An after fabrication hot dipped galvanized finish is available. Powder Coat Our powder coat finish assures a high level of

More information

Torque Specifications

Torque Specifications SENR3130-10 Torque Specifications All Caterpillar Products S/N From the library of Barrington Diesel Club CONTENT General Information 01/07/2005 Introduction to Torque 01/07/2005 Torque-Turn 01/07/2005

More information

INSTRUCTIONS 360 Y-DROP HAGIE STS 2015

INSTRUCTIONS 360 Y-DROP HAGIE STS 2015 INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INTRODUCTION Before beginning, it s important to know where each mounting bracket fits relative to the row spacing involved. The

More information

NHR Powder Feed Hopper

NHR Powder Feed Hopper Instruction Sheet P/N 0804A0 NHR-8-50 Powder Feed Hopper Description This instruction sheet provides specifications, installation and operation instructions, and parts lists for the NHR-8-50 powder feed

More information

Effective September, 2005 Copyright 2005 PAGE

Effective September, 2005 Copyright 2005 PAGE -42 DTX Junction Boxes: Dust-Ignitionproof, Watertight Cast iron box and cover for surface mounting. Cast aluminum box and cover for surface mounting. Applications DTX dust tight and watertight boxes are

More information

Rated to the New, Higher Pressure Classes in Latest Editions of AWWA C900 and C909. Joint Restraint Products INFORMATION FEATURES & ADVANTAGES

Rated to the New, Higher Pressure Classes in Latest Editions of AWWA C900 and C909. Joint Restraint Products INFORMATION FEATURES & ADVANTAGES Pipe Restrainers series 1000G2 1000G2C Restrainers for AWWA CI OD C900/C909 PVC/PVCO Pipe with MJ or Ductile Iron Push-On Fittings (Formerly Series 9000) INFORMATION Second Generation (Gen 2) PVC Restrainers

More information

4-63 T UBE FITTINGS TUBING P OLYURETHANE TUBING SERIES TU P RODUCTS FOR A LIST OF STOCKED PRODUCTS, PLEASE SEE THE CURRENT SMC PRICE LIST S TOCKED

4-63 T UBE FITTINGS TUBING P OLYURETHANE TUBING SERIES TU P RODUCTS FOR A LIST OF STOCKED PRODUCTS, PLEASE SEE THE CURRENT SMC PRICE LIST S TOCKED T UBE FITTINGS 4-63 P OLYURETHANE TU Flexible tubing For general industrial air and water applicatons 20m and 100m coils 8 colour option Available in metric size (TU) and inch size (TIUB) CONTACT SMC FOR

More information

Water. VAG DUOJET Automatic Air Valve Single-chamber type PN 10/16/25/40 - DN KAT-A 1912

Water. VAG DUOJET Automatic Air Valve Single-chamber type PN 10/16/25/40 - DN KAT-A 1912 Water VAG DUOJET Automatic Air Valve Single-chamber type Product characteristics and benefits Resilient seated With flange end acc. to EN 1092-2 Single chamber air valve in compact design Very high discharge

More information

Standard Hangers and Adapters

Standard Hangers and Adapters Standard s and Adapters Cable Gripping Tabs Prevent cable slippage without the need for a permanently installed hoisting grip. Pre-Assembled and Captivated Hardware Eliminates the need for field assembly.

More information

DEADBOLT SETS, MECHANICAL FEATURES

DEADBOLT SETS, MECHANICAL FEATURES , MECHANICAL FEATURES 8000 SERIES LOW PROFILE CYLINDER DEADBOLT FOR 1 5 8 (41mm) DOOR PREP All deadbolts feature a ½ low-profile cylinder projection. CASE: Deadbolt case is formed of heavy gauge steel

More information

ALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8" and 1/4" PTF Port Sizes. Air line equipment.

ALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8 and 1/4 PTF Port Sizes. Air line equipment. Air line equipment R Miniature Brass Body Regulator Water and Compressed Air Service 1/" and 1/" PTF Port Sizes Compact design, corrosion resistant construction Brass body with choice of plastic or brass

More information

Storage Systems and Accessories

Storage Systems and Accessories Storage Systems and Accessories High Pressure Air and Inert Gases 4500-6000 PSIG DOT and ASME Cylinders High Pressure Storage Systems If an application requires storage, either in the form of a single

More information

Anchor Component Material Standard Mechanical Properties

Anchor Component Material Standard Mechanical Properties SECTION 4.1 PAGE 1 / 5 l description The UCAN sleeve anchor is a light-medium duty anchor ideal for applications in concrete, hollow block and brick. It is a mechanical expansion anchor assembled with

More information

Model MTB-ASME Vertical Bladder Tanks

Model MTB-ASME Vertical Bladder Tanks DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)

More information

Plok. Rapid Mating Multi-Pin Industrial Connector. Amphenol Industrial Sine Systems * Pyle Connectors Corporation

Plok. Rapid Mating Multi-Pin Industrial Connector. Amphenol Industrial Sine Systems * Pyle Connectors Corporation - Plok Rapid Mating Multi-Pin Industrial onnector mphenol Industrial Sine Systems * Pyle onnectors orporation eatures and enefits Rapid mate spring loaded, push to mate, pull to unmate coupling system

More information

MSA Confined Space Entry Equipment

MSA Confined Space Entry Equipment MSA Confined Space Entry Equipment Because every life has a purpose... MSA Confined Space Entry Equipment MSA XTIRPA Manhole Guard System Use for confined space vertical entry and fall protection when

More information

Model MTB-ASME Vertical Bladder Tanks

Model MTB-ASME Vertical Bladder Tanks DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)

More information

Side-of-Pole Mount for 1 Module (SPM1) For Module Types A & B

Side-of-Pole Mount for 1 Module (SPM1) For Module Types A & B Side-of-Pole Mount for 1 Module (SPM1) For Module Types A & B ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 080311-2 SP3363-1 Side-of-Pole Mount for 1 Module (SPM1)

More information

ALTERNATOR RACKS 135, 170 & 190 INSTRUCTIONS

ALTERNATOR RACKS 135, 170 & 190 INSTRUCTIONS Figure A Item # Description Quantity 1 Alternator Rack 1 1 3 4 11 5 10 8 2 Lower Mount Kit (see detail) 2 3 16mm M5 Swivel-Mount Bolt 2 4 M7 Washer 2 5 M6 Lock Nut 2 6 Lock Washer 2 7 Swivel Mount 2 8

More information

Copper Bonded Ground Rod / Grounding Rods / Copper Bonded Earth Rod / Earthing rods

Copper Bonded Ground Rod / Grounding Rods / Copper Bonded Earth Rod / Earthing rods Copper Bonded Ground Rod / Grounding Rods / Copper Bonded Earth Rod / Earthing rods Copper bonded earth rods are made from low carbon Steel. Earth Rods are molecularly bonded with 99.9% pure electrolytic

More information

Side-of-Pole Mount for 1 Modules (SPM1) For Module Types E, F, G, & H ASSEMBLY INSTRUCTIONS. step-by-step assembly and installation

Side-of-Pole Mount for 1 Modules (SPM1) For Module Types E, F, G, & H ASSEMBLY INSTRUCTIONS. step-by-step assembly and installation Side-of-Pole Mount for 1 Modules (SPM1) For Module Types E, F, G, & H ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A SP3348-1 PCN 022212-2 Side-of-Pole Mount for 1 Module

More information

Flow Sensors & Hydrometers Specification Sheet

Flow Sensors & Hydrometers Specification Sheet Baseline Flow s and Hydrometers Baseline s smart flow sensors and hydrometers are two-wire ready flow measurement and control devices that are pre-programmed with the correct K and Offset values. In addition,

More information

Two Ferrule Tube Fittings 316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) O.D.

Two Ferrule Tube Fittings 316 stainless steel ranging from 1/8 to 1 (6mm to 25mm) O.D. Two errule Tube ittings 316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) valve & fitting www.veelok.com Introduction Vee-Lok tube fittings are designed to provide a leak-free connection and applied

More information

BENDING CONDUIT / TUBING USING HAND BENDERS

BENDING CONDUIT / TUBING USING HAND BENDERS www.learnnec.net 408-866 - 7890 Electrical Code training and consultation based on NEC 2008 BENDING CONDUIT / TUBING USING HAND BENDERS The ability to bend conduit and tubing is a requirement for all electricians.

More information

B-Too Drilling and Tapping Machine

B-Too Drilling and Tapping Machine Material Specifications Powered by hand or with Ridgid 690 (TM-29) High strength, modular aluminum and steel components Inserts any 3 /4" to 1" corporation stop under pressure Extracts threaded corporation

More information

Hardened Steel Washers

Hardened Steel Washers USS (Type A Wide) Flat Washers Hardened Steel Washers Grade 8 S.A.E. Dimensions American Standard Lbs. Per No./Pcs. Gauge M Pcs. Per Lb. 3/16 9/16 1/4 18 (3/64) 2.8 361 1/4 3/4 5/16 16 (1/16) 6.7 149 5/16

More information

Airwalker. Installation and Safety Information. Stretch Products for Dance, Therapy, Education, and Fitness

Airwalker. Installation and Safety Information. Stretch Products for Dance, Therapy, Education, and Fitness Airwalker Installation and Safety Information Stretch Products for Dance, Therapy, Education, and Fitness www.dyenamicmovement.com Airwalker is a Registered Trademark of Dye namic Movement Products, Inc.

More information

threaded rod Keystock Diamond Case Linear Shafting strapping seals tools

threaded rod Keystock Diamond Case Linear Shafting strapping seals tools threaded rod Keystock Diamond Case Linear Shafting strapping seals tools THREADED STEEL ROD... 19-2 KEY STOCK... 19-2 STEEL STRAPPING... 19-3 DIAMOND CASE SHAFTING Carbon (1060) Standard Sizes... 19-4

More information

AWWA C504 COMPLIANT VALVES FROM 3 THRU 108

AWWA C504 COMPLIANT VALVES FROM 3 THRU 108 AWWA C504 COMPLIANT VALVES FROM 3 THRU 108 PO Box 411 Berwick PA 18603 800-247-VALV www.crispinvalve.com 500 SERIES: Sizes 3-20 Available The K-Flo 500 Series is a heavy-duty resilient seated butterfly

More information

TEST REPORT. Report No.: G Rendered to: VELUX America LLC Greenwood, South Carolina

TEST REPORT. Report No.: G Rendered to: VELUX America LLC Greenwood, South Carolina TEST REPORT Report No.: G4124.02-109-44 Rendered to: VELUX America LLC Greenwood, South Carolina PRODUCT TYPE: Sun Tunnel Skylight SERIES/MODEL: TCC 022 SPECIFICATION(S): Occupational Safety and Health

More information

CLIMBING Pads. Straps Gaffs Spikes Hardware

CLIMBING Pads. Straps Gaffs Spikes Hardware CLIMBING Pads Straps Gaffs Spikes Hardware Quick Change Aluminum Climbers CTB Tree and Pole Climbing Kit Kit with straps and L pads Patented design give these climbers strength, durability and style Utilizes

More information

SR100 Series Service Regulators. Technical Bulletin

SR100 Series Service Regulators. Technical Bulletin SR00 Series Service Regulators Technical Bulletin Model SR00 Series Regulator 0 Elster American Meter The compact, high capacity SR service regulator is designed for residential or light commercial/industrial

More information