Progression 24LD Stern Drive

Size: px

Start display at page:

Download "Progression 24LD Stern Drive"

Jasper McDonald
5 years ago
Views:

1 Progression 24LD Stern Drive This list is provided to help you to evaluate the many advantages that come STANDARD with a PROGRESSION 24LD. As you compare Progression s many superior features to the competition, it will become apparent that Progression builds a boat unlike any other in the world. Construction [ ] 10 YEAR HULL WARRANTY. [ ] GEL COAT: 3 color, your choice. [ ] RESIN: AME [ ] FIBERGLASS BI & TRI Directional. [ ] VACUUM BAGGING: all hand lay up and vacuum bagged all structural laminates. [ ] BALTEK DECOLITE FIBERGLASS COMPOSITE PANELS used instead of plywood. [ ] RUBRAIL 100% THRU-BOLTED: deck and hull joined together with bi-directional glass. Hardware [ ] TOW EYES: (QTY.3) two located at stern and one at bow. [ ] CLEATS: (QTY.5) - pull up, one located at the bow, 2 located at the stern, port and starboard side, and 2 located even with dash on port and starboard side. [ ] ROPE CHOCKS: (QTY.2) stainless steel, located port and starboard side of bow cleat. [ ] RUB RAIL is made of stainless steel, 1 1/4" wide and 100% through bolted. [ ] DRAIN PLUG: custom made out of stainless steel. [ ] FUEL TANK: 90 gal. for a single engine and 130 gal. for a twin engine installation. [ ] FUEL LINE: Coast Guard approved. [ ] FUEL FILL is a 2-inch screw top, stainless steel gas fill, mounted on starboard side. [ ] CLAMPS for fuel fill line, (4) T bolt stainless clamps. [ ] FUEL VENT is made of stainless steel and protected with a shield, mounted on the starboard side. [ ] HATCH LIFTS: (QTY.2) gas spring lifts help to assist in lifting the rear hatch. [ ] DECALS: (QTY.2) Progression logo, located on port and starboard side at transom. [ ] VINYL LETTERS: (QTY.2) Progression, located port and starboard on wind screen. Cockpit [ ] LENGTH of the stern drive cockpit with a 3-foot hatch is 76 inches. [ ] COCKPIT HEIGHT: average of 25 inches. [ ] SEATS SIX ADULTS. [ ] BOLSTER BUCKETS: (QTY.2) state of the art sit down bolsters with 6.5 inches of multidensity mattress foam and seat slides. [ ] SEAT SLIDES are for front to back adjustability for each sit down bucket seat. [ ] REAR BENCH seats four adults and are equipped with grab handles. [ ] UPHOLSTERY: you have the choice of any 3 colors of the many we offer. Pg. 01

Cockpit, continued Progression 24LD Stern Drive [ ] SUN CUSHION on the stern drive model the hatch comes in 3' and 4', depending on cockpit length and drive options.

STRAIGHT DASHBOARD Straight dashboard is standard [ ] DASHBOARD runs straight across from port to starboard. [ ] HANDLE is made of 1 stainless steel and is located on the dashboard, port side.

2 Cockpit, continued Progression 24LD Stern Drive [ ] SUN CUSHION on the stern drive model the hatch comes in 3' and 4', depending on cockpit length and drive options. [ ] CARPET is throughout the entire cockpit. You have the choice of any two colors of the many that we have to offer. [ ] COCKPIT COVER comes with a pole vent and 2 side vents with screens. STRAIGHT DASHBOARD Straight dashboard is standard [ ] DASHBOARD runs straight across from port to starboard. [ ] HANDLE is made of 1 stainless steel and is located on the dashboard, port side. [ ] FLOOR LOCKER is located in the center of the floor it starts at the dash and runs forward. It comes with a lockable cover. [ ] CABIN LENGTH 103 from dash to bow bulkhead. Crawl up cuddy is standard [ ] CABIN HEIGHT is approximately 26 inches (average). [ ] HEADLINER through out the cabin is made of a plush light colored fabric. [ ] BOW LOCKER has a carpeted cover with snaps. [ ] CARPET used for the floor and wall covering throughout the entire cabin. (2 colors). Pg. 02

3 Progression 24LD Stern Drive OPTIONAL Cuddy Cabin [ ] ENTRANCE HATCH is made of bronze Lexan with height adjuster. Windscreens shown are optional [ ] ENTRANCE WAY is an opening into the dashboard to make easy access to cabin. [ ] FLOOR COMPARTMENT is under the cockpit floor located in front of the fuel tank. Opening is in the cabin and covered by snap carpeted cover. [ ] BOW LOCKER has a mirrored access door. [ ] V BUNK is 6' long. The cushion is made up of 3 1/2" thick mattress foam that s covered with plastic. Vinyl covers come in your choice of 2 colors). The cover is made to be easily removed with a zipper that makes for easy cleaning. [ ] V BUNK STORAGE LOCKER: (QTY.1) is a compartment under the V bunk cushion giving you more storage. 6 [ ] CABIN LIGHTS consist of 2 lights in V bunk area and 2 lights in the seating area, controlled by 1 switch located on the dash. [ ] CABIN SEATS: (QTY.2) they seat 4 adults and measure 34 long. The seats face each other and are made of the finest mattress foam. The seats have a total thickness of 3 of cushion. The seat covers are also made with zippers and are completely removable. [ ] MIRRORS: (QTY.2) both are located on the inside of the cabin on the dashboard bulkheads. Behind the starboard mirror there's access to the gauges and helm. [ ] CABIN HEIGHT: has approximate average of 39 inches. 34 Pg. 03

1) has 5 waterproof switches with LED indicators. [ ] BILGE PUMP Lovett 1200 works with automatic and manual operation. [ ] BATTERY BOX is made of stainless steel and thru bolted through the floor.

4 Progression 24LD Stern Drive Electrical [ ] BOW LIGHT is made of stainless steel and is mounted on the deck (bow). [ ] STERN LIGHT is mounted at the starboard stern and the pole is completely removable. [ ] FUSE PANEL is a ATC/ATO 12 circuit plug in, with a ground bar. [ ] DASH SWITCH PANEL (QTY.1) has 5 waterproof switches with LED indicators. [ ] BILGE PUMP Lovett 1200 works with automatic and manual operation. [ ] BATTERY BOX is made of stainless steel and thru bolted through the floor. [ ] ELECTRICAL TUBING runs from bow to stern and is mounted every 12 inches to protect against the wiring from getting chafed. Stern Drive Rigging For Single Drive Unit [ ] INSTRUMENTS are Mercury gauges, fuel, tachometer, 250 degrees water temperature, voltmeter and 80 PSI oil pressure gauge. [ ] GAFFRIG DRY SPEEDOMETER with a stainless steel kick up water pickup. [ ] DASH SWITCH PANEL is a five-gang switch assembly. [ ] ELECTRICAL RACEWAY wiring trough with removable cover for easy accessibility to existing dashboard wiring. [ ] HELM: Capilano ( 496 Magnum and up) steering helm with Aeroquip Hose and fittings. [ ] ACCESS to the back of the dashboard is through a mirror access panel over cabin Single Engine, 350 Magnum only. [ ] POWER STEERING is by MerCruiser. [ ] RUBBER MOUNTS are MerCruiser s standard mounting system. [ ] THRU THE HUB EXHAUST: MerCruiser s standard exhaust system through the center of the propeller. Pg. 04

Progression 24LD Stern Drive Stern Drive Rigging For Single, continued 496 and up the following is standard.

[ ] STRINGER MOUNTS are custom made aluminum mounts. These mounts are used to fasten the front engine mount to the stringers.

[ ] CONTROLS are Mercury's panel or console mount Commander 3000 series, with built in trim switch, trailering switch and safety switch.

[ ] LATHAM HYDRAULIC STEERING: includes one steering ram for the single drive application and two rams with an external tie bar for the twin drive applications.

5 Progression 24LD Stern Drive Stern Drive Rigging For Single, continued 496 and up the following is standard. [ ] SOLID FRONT ENGINE MOUNTS:To meet engine manufactures warranty requirements, Progression installs this system as standard. [ ] STRINGER MOUNTS are custom made aluminum mounts. These mounts are used to fasten the front engine mount to the stringers. [ ] FUEL FEED system uses Coast Guard approved hose. [ ] CONTROLS are Mercury's panel or console mount Commander 3000 series, with built in trim switch, trailering switch and safety switch. [ ] CABLES: Mercury s, one shift and one throttle. [ ] ENGINE HARNESS and key switch are by Mercury. [ ] THRU TRANSOM EXHAUST comes with 4" stainless steel tips and rings. [ ] LATHAM HYDRAULIC STEERING: includes one steering ram for the single drive application and two rams with an external tie bar for the twin drive applications. We install Latham's rear mount on the drives upper along with stainless steel braided hose and fittings. Progression installs this system to meet the engine manufactures warranty requirements. [ ] PROPELLER is Mercury's 4 blade Bravo. [ ] ELECTRIC HATCH LIFT to make lifting a pleasure to get to engine compartment. Installed with a quick release pin in case of power failure. [ ] ENGINE COMPARTMENT LIGHTS: (Qty. 2) with dash mounted switch mounted on port and starboard side of the engine. Pg. 05

6 Pg. 06

7 Pg. 07

8 Pg. 08 Windscreens are optional

9 Pg. 09

10 Pg. 10

11 Pg.11

12 Pg. 12

[ ] 10 YEAR HULL WARRANTY [ ] GEL COAT: [ ] RESIN: [ ] FIBERGLASS [ ] VACUUM BAGGING:

[ ] 10 YEAR HULL WARRANTY [ ] GEL COAT: [ ] RESIN: [ ] FIBERGLASS [ ] VACUUM BAGGING: Progression 22 This list is provided to help you to evaluate the many advantages that come STANDARD with a PROGRESSION 22. As you compare Progression s many superior features to the competition, it will