BOWFLARE IMPACT LOADS ON CONTAINERSHIPS

Size: px
Start display at page:

Download "BOWFLARE IMPACT LOADS ON CONTAINERSHIPS"

Transcription

1 D. Bajič, Lloyd s Register EMEA, Trieste, Italy J. Prpić-Oršić, A. Turk, Faculty of Engineering, University of Rijeka, Croatia BOWFLARE IMPACT LOADS ON CONTAINERSHIPS Summary Bowflare slamming describes dynamic wave impact on the bow side shell structure above the design waterline. During water entry the bow structure is subject to high pressure loads which sometimes lead to local damages that usually do not affect the survivability of the ship. Recently, the number of large container ships is increasing. In order to increase the convenience for cargo loading for containers and pure car carriers, the recent tendency has been to widen the bow flare angle. This raises the flare slamming pressure excessively and causes structural damages. The problem is recently exacerbated by modern trend to "drive through" bad weather. The bow flare slamming impact on such ships was investigated by applying contemporary rules. For practical purposes, the values of these pressures are usually obtained by simplified procedures suggested by classification societies. This paper addresses some basic aspects of the problem such as the influence of the design parameters as well as the problem of the uncertainty of the results. The comparison of various approaches suggested by different classification societies suggests significant difference in estimated values of pressure. The objective of the research is also to improve our understanding of the background of the various classification societies approaches related to bowflare slamming pressure estimation. Key words: bowflare slamming, slamming pressures, containerships OPTEREĆENJA IZBAČENE FORME PRAMCA NA BRODOVIMA ZA PRIJEVOZ SPREMNIKA Sažetak Udaranje izbačene forme pramca dinamički je udar bočnog dijela konstrukcije pramca iznad vodne linije o morsku površinu. Tijekom ulaska u vodu pramčana je konstrukcija izložena velikim opterećenjima koja ponekad mogu dovesti do lokalnih oštećenja koja uobičajeno ne ugrožavaju preživljavanje broda. U posljednje se vrijeme broj velikih kontejnerskih brodova značajno povećava. U cilju što boljeg iskorištenje prostora za smještaj tereta na novim se brodovima za smještaj kontejnera i automobila povećava kut izbočene forma pramca, što ima za posljedicu veća udarna opterećenja te lokalna oštećenja konstrukcije. Problem je dodatno izraženiji i zbog trenda "vožnje kroz" loše vremenske uvjete. U radu je udarno opterećenje na izbačenu formu pramca analizirano primjenjujući trenutno važeća pravila klasifikacijskih društava. Za praktične svrhe, vrijednosti tlakova uobičajeno se dobivaju pojednostavljenim postupcima prema preporukama klasifikacijskih društava. Ovaj rad obrađuje neke od osnovnih aspekata spomenutog problema kao što su utjecaj projektnih parametara te vjerodostojnost dobivenih vrijednosti. Usporedba različitih pristupa klasifikacijskih društava ukazuje na značajnu razliku izračunatih vrijednosti udarnih tlakova. Cilj istraživanja je i unapređenje razumijevanja pozadine postupka procjene tlakova uslijed udara izbočene forme pramca pojedinih klasifikacijskih društava. Ključne riječi: udaranje izbačene forme pramca, udarni tlak, kontejnerski brodovi

2 D. Bajič, J. Prpić-Oršić, A. Turk Bowflare impact loads on containerships 1. Introduction In order to increase area available for cargo loading, in particular on container and Ro- Ro ships, the recent trend is to widen deck forward. Consequently, bowflare angles are lowered. Bowflare angle is intended as an angle in a transverse section between side shell and horizontal axes. This raises the flare slamming pressure excessively and may cause structural damages. It has been observed that such ships often suffer damages in the fore end region while sailing in heavy weather conditions. It has been realized that damages are caused by dynamic wave impacts in these regions due to excessive ship motions. The problem is recently exacerbated by modern trend to "drive through" bad weather particularly in conjunction with high speeds. The major problem in this respect is to accurately predict values of these pressures in order to determine adequate reinforcements in the bow area. Various classification societies have developed in the past various sets of Rules. These Rules have been created in a different ways combining analytical techniques with results of direct calculations all calibrated with damages experienced in service. Intention of this paper is to investigate differences in their approaches in terms of predicted pressures in a bow flare area as well as sensitivity to different input parameters. Lloyd s Register (LR), American Bureau of Shipping (ABS), Bureau Veritas (BV), Germanischer Lloyd (GL), Korean Register (KR) and Det Norske Veritas (DNV) have been chosen for the purpose of this investigation. 2. Bowflare slamming phenomena As shown in Figure 1, the problem of bowflare slamming is the problem of a symmetrical body penetrating the water surface. The y and z axes are taken along the undisturbed free surface and along the body s centreline pointing upward, respectively. The problem corresponds to the vertical motion of a hull section in heading or following waves, in addition, the vertical speed V(t) in the figure can be considered the body s relative velocity with the water surface of incoming waves at the target section. The fluid domain is surrounded by the boundaries consisting of the free surface, the body surface, the centreline, the side walls, and the bottom. Assuming the fluid is incompressible and the flow is irrotational, the fluid motion is specified by the velocity potential. z V(t) WATERLINE y Fig. 1 Bowflare slamming Slika 1. Udaranje izbačene forme pramca

3 Bowflare impact loads on containerships D. Bajič, J. Prpić-Oršić, A. Turk Traditionally the water impact problem is applied to the slamming analysis. So far enormous works have been done in this respect (e.g. Korobkin, (1996), Faltinsen (2005)). The water impact approach is classified roughly into analytical and numerical. The analytical approach is based on mathematical models. Although the Wagner theory is well known, the recent studies are devoted to deal with the slamming problem of the arbitrary shaped body (Korobkin (2005), Takagi et al. (2007)). The numerical approach is represented by the boundary element method (BEM). A certain level of success was already achieved previously, but the important progress has been actuated when the numerical simulation of the impact jet is realized, Sun et al. (2007). Moreover, the problem additionally become more complex because of stochastic sea nature and the problem of estimation of worst weather condition which the ship can suffer during exploitation. However, in practice the problem of design slamming pressures are usually obtained by empirical formulae given by classification societies. These formulas are simplified and take into account simplified form of ship defined by basic parameters (length, beam, draft, block coefficient etc.). The bow form is defined by relevant angles α (angle between axes x and section inclination in vertical longitudinal plane), β (angle between axes y and section inclination in vertical transversal plane) and γ (angle between axes x and section inclination in horizontal plane) shown at Fig. 2. z α β x y γ x Fig. 2 Relevant angles Slika 2. Relevantni kutovi The procedures proposed by classification societies are based on performed direct calculations and correlated by service experience. Consequently, these formulas are not necessarily valid for novel designs.

4 D. Bajič, J. Prpić-Oršić, A. Turk Bowflare impact loads on containerships 3. Classification societies requirements 3.1. Applicable ship type LR has two sets of relevant Rules (Lloyd s Register, (2009)). First one contemplated in the Part 3, Chapter 5 are intended for ships with moderate block and moderate speed hull forms. Since these requirements were not adequate for high speed hull forms with more significant bow flare angles a revised bow flare slamming pressure requirements were introduced in the Part 4, Chapter 2 for passenger ships, Ro-Ro ships, ferries and container ships. ABS has different sets of Rules (American Bureau of Shipping, (2010)) for oil tankers contemplated in the Part 5-1-3, bulk carriers contemplated in the Part and Container ships contemplated in the Part DNV has unified Rules (Det Norske Veritas, (2009)) contemplated in the Part 3, Chapter 1, Section 7, para E300 intended for all ship types. Normally only ships with well rounded bow lines and or flare will need strengthening. As regards BV (Bureau Veritas, (2009)), relevant requirements are set in the Part B, Chapter 9, Section 1, paragraph 4. These requirements are intended for ships other than passenger ships which makes them applicable to container vessels. GL (Germanisher Lloyd, (2009)) has separate requirements for container ships contemplated in the Chapter 5, in particular as regards bow flare slamming in the Section 4 B paragraph 2.2. As to KR (Korean Register, (2009)), relevant requirements can be found in the Part 3, Chapter 8, Section 1, paragraph 108. Basically these requirements are set for pure car carriers but may be considered applicable to container ships as well Applicable bow region ABS requires investigating bowflare slamming in the region above the waterline between and 0.25 Rule length (L) from the forward perpendicular (FP). As per DNV requirements, the effect of bow impact loads is in general to be evaluated in the region forward of a position 0.1L from FP and above the summer load waterline. On the other hand LR requires strengthening shell envelope against bow flare typically over the fore end side and bowing structure above the waterline in the areas where the hull exhibits significant flare. BV requires to reinforce bow area that is extending forward of 0.9 L from the aft end of L and above the summer load waterline up to the level at which a knuckle with an angle greater than 15 degrees is located on the side shell. As per GL, bow flare area to be specially investigated is that forward of 0.1 L behind F.P. and above the ballast waterline. Similarly, KR states bow flare positions considered to endure large wave impact pressures are those above the load line for 0.1 L forward Selected hull form Considering content of chapter 3.1. above, the container ship has been chosen as a referent ship type for this comparison. The main characteristics of chosen hull form and relevant bow sections are shown at the Fig. 3. As far as content of chapter 3.2. is concerned, this investigation has been limited to the area forward of 0.1L from FP above waterline. Selected frames 312, 320, 328, 336, 344 and 352 are located at approximately 91, 93, 96, 98, 100 and 103% of length from aft end

5 Bowflare impact loads on containerships D. Bajič, J. Prpić-Oršić, A. Turk respectively. Pressures have been calculated at each frame for three different levels, i.e. at 11 m (Level 1), 13.8 m (Level 2) and 16.6 m (Level 3) above base line. L = 240 m Breadth = 36 m Draught = 8.5 m Block coefficient = 0.71 Service speed = 22 kn Fig. 3 Bow form Slika 3. Forma pramca 4. Bowflare slamming pressure estimation For selected positions six different Rule calculation procedures have been applied and following values of bowflare slamming pressures, shown in Fig. 4, have been obtained. For the time being analysis is limited to pressure estimation only. Previous work (Bajič&Prpić-Oršić, 2009) has shown that, with respect to thickness and at least considering ABS, DNV and LR, formulas for scantlings determination were quite similar. Therefore, conclusions made only on the basis of the pressures were still approximately valid for the final scantlings too. However, intention is to continue with this analysis in the future and also elaborate scantlings in terms of plating thickness and section modulus of primary and secondary members. As can be seen from the Fig. 4, BV, DNV and LR values are roughly similar. GL and ABS values, apart from few points, are significantly lower especially where bow flare angles are lower. Great oscillations in calculated pressures have been noted in case of KR. As explained later, these oscillations are mainly the function of the oscillations of hull form coefficients.

6 D. Bajič, J. Prpić-Oršić, A. Turk Bowflare impact loads on containerships Fig. 4 Pressure distribution over decks Slika 4. Razdioba tlakova po palubama 5. Bowflare slamming formulas decomposition Generally, slamming pressure is considered as a proportional to the square of the relative velocity v r between the wave and ship bow at the instant of impact expressed in broad terms as

7 Bowflare impact loads on containerships D. Bajič, J. Prpić-Oršić, A. Turk where ρ is a water density and k is a non-dimensional hull form coefficient. In the following paragraphs, for various classification societies, calculated pressure has been decomposed in order to extract relative velocities and hull form coefficients as estimated by each society. Furthermore, influence of each on these two parameters on the final value of calculated pressure has been analysed. ABS has not been included since in this instance it was not feasible to extract above mentioned two parameters from pressure estimation formula. As regards to LR, in order to simplify the analysis, part of the pressure caused by forward ship speed is neglected since it generally constitutes for only up to max 3% of total pressure. (1) 5.1. Hull form shape coefficient When comparing hull form coefficients determined by classification societies with theoretical ones a following can be exhibited from the Fig. 5 Hull form coefficients as determined by LR are very well corresponding with those predicted by Von Karman s theory. On the other hand, coefficients as estimated by BV are close to those predicted by Ochi s theory. DNV appears to follow also Ochi s theory but with some additional safety margin. This may be expected since coefficients foreseen by the societies can usually include some safety factors obtain by calibration process on the damaged ships. No correlation has been found in case of GL while large oscillations are present in the case of KR. As seen from the Fig. 6, GL generally have the lowest coefficients. LR values are slightly above. Greater values are used by BV while the greatest values of hull form coefficients are those foreseen by DNV. As said previously, large oscillation of hull form coefficients have been noted in case of KR. As per separate analysis this phenomena is mainly caused by coefficient K p that has large step when corrected flare angle reaches 18 degrees. Fig. 5 Hull form coefficients Slika 5. Koeficijenti forme trupa

8 D. Bajič, J. Prpić-Oršić, A. Turk Bowflare impact loads on containerships Fig. 6 Hull form shape coefficient over decks Slika 6. Koeficijent oblika forme po palubama 5.2. Impact velocity estimation With respect to relative impact velocities, diagrams in Fig. 7 show less difference between various classification societies when compared to differences found for hull shape coefficients. In case of velocities, the lowest values are those estimated by KR. Slightly higher are those calculated by BV and DNV having the same formula for relative impact velocity. GL in this case has a constant value generally slightly above BV and DNV estimation. The highest values are those as calculated by LR. Both, KR and in particular LR

9 Bowflare impact loads on containerships D. Bajič, J. Prpić-Oršić, A. Turk show trend of increase of relative velocity towards the fore end that is perfectly to expect since these velocities mostly influenced by pitching. Fig. 7 Impact velocity over decks Slika 7. Udarna brzina po palubama

10 D. Bajič, J. Prpić-Oršić, A. Turk Bowflare impact loads on containerships 6. Sensitivity study Differences found in the comparison of bowflare pressure values are significant. Analyzing the different empirical formulas as proposed in the Rules by each classification society it is not possible to get insight into the background of theirs procedures. For example LR requirements originally were developed from a comparative study carried out on cargo ships which experienced fore end damages from heavy weather and on undamaged ships having a similar configuration and service speed (to ensure that strengthening for bow slamming was not carried out unnecessarily). This method was further calibrated using general cargo ship type hull forms, i.e. moderate block and moderate speed hull forms. Later, it was found that these requirements were not adequate for high speed hull forms with more significant bow flare angles. For this reason a revised bow flare slamming pressure requirement was introduced for passenger ships, Ro-Ro ships, ferries and container ships. This method is based on the theoretical approach using ship motions correlated with service experience. The summary of input parameters for calculation of slamming pressures has been listed at Table 1. Therefore, at this stage, it was decided to examine the differences in the results through influence of various input parameters. Only parameters required by all societies are considered. Among them ship speed V, distance of considered point from waterline z P (calculated as difference of distance of considered point from baseline z P and draft T) and angle between side shell and waterline in a transverse section β have been selected as the most influential ones. Moreover, the influence of block coefficient C B and angle between axes x and section inclination in horizontal plane, γ, on pressure values have been examined. It is important to point out that medium increment of pressure is calculated as an average for the entire bow region. The results are shown in the Figures 8 to 12. respectively. Table 1 Input parameters Tablica 1. Ulazni parametri LR ABS DNV BV GL KR L C B - - V T - β γ - α x P z P Stem angle Half breadths B D As regards ship speed, lowest influence has been noted in case KR. Slightly larger and very similar dependency has been noted in case of LR, DNV, BV and GL. The biggest influence of speed has been noted for ABS.

11 Bowflare impact loads on containerships D. Bajič, J. Prpić-Oršić, A. Turk Fig. 8 Ship speed influence on slamming pressure Slika 8. Utjecaj brzine broda na tlak udara Fig. 9 Ship draught influence on slamming pressure Slika 9. Utjecaj gaza broda na tlak udara Apart KR, very small dependency on the distance of considered point from WL has been noted. Fig. 10 Angle β influence on slamming pressure Slika 10. Utjecaj kuta β na tlak udara

12 D. Bajič, J. Prpić-Oršić, A. Turk Bowflare impact loads on containerships Variation of flare angle showed generally to have large impact on the calculated pressure. This has been particularly noted in case of KR and LR, and partially GL. Fig. 11 Block coefficient influence on slamming pressure Slika 11. Utjecaj koeficijenta punoće na tlak udara Apart from KR, very small dependency on the block coefficient has been noted. Fig. 12 Angle γ influence on slamming pressure Slika 12. Utjecaj kuta γ na tlak udara Apart KR, very small dependency on the WL angle has been noted. 7. Conclusion This analysis has shown that various classification societies have very different approach when calculating bowflare pressures. Bigger differences have been noted in case of hull form coefficients while relative impact velocities were closer. Sensitivity analysis has shown that the most governing criteria in the pressure calculation is flare angle.

13 Bowflare impact loads on containerships D. Bajič, J. Prpić-Oršić, A. Turk The further investigation, still in terms of pressures, will be directed toward analyzing novel forms extreme bowflare slamming pressures by direct calculation and comparing it with values estimated by empirical formulas. REFERENCES [1] American Bureau of Shipping, 2006, Rules for Building and Classing Steel Vessels, Houston [2] D. Bajič, J. Prpić-Oršić, Comparison of various classification societies requirements, ASDEPP Workshop, Split, Croatia, [3] Bureau Veritas, 2009, Rules for the classifications of steel ships, Part D- Containerships, Neuilly-sur- Seine Cedex [4] J. Daidola, and V. Mishkevich, 1995, Hydrodynamic impact on displacement ship hulls, Ship Structure Committee SSc-385, Washington [5] Det Norske Veritas, 2004, Rules for Ships, Hovik [6] O.M. Faltinsen, 2005, Hydrodynamics of High-Speed Marine Vehicles, Cambridge University Press [7] Germanischer Lloyd, 2009, Rules for the classifications and construction of seagoing ships, Hamburg [8] A.A. Korobkin, 1996, Water impact problem in ship hydrodynamics, Advance in Marine Hydrodynamics, M. Ohkusu, Ed (Chap.7), Computational Mechanics Publishing, Southampton, Boston [9] A.A. Korobkin, 2005, Analytical Models of Water Impact, Euro. J. Applied Mathematics, 16, pp.1 18 [10] Korean Register, 2009, Rules for the classifications of steel ships, Seul [11] Lloyd s Register, July 2009, Rules and Regulations for the Classification of Ships, London [12] H. Sun and O.M. Faltinsen, 2007, Water Impact of Horizontal Circular Cylinder and Cylindrical Shells, Applied Ocean Research, Vol.28, pp [13] K. Takagi and Y. Ogawa, 2007, Flow Models of the Flare Slamming, Proc. of International Conference on Violent Flows, pp

Abstract. 1 Introduction

Abstract. 1 Introduction Parametric analysis of hull structure of mono- and catamaran-type inland vessels T. Jastrzebski & Z. Sekulski Faculty ofmaritime Technology, Technical University of Szczecin, AL Piastow 41, 71-065 Szczecin,

More information

Numerical and Experimental Investigation of the Possibility of Forming the Wake Flow of Large Ships by Using the Vortex Generators

Numerical and Experimental Investigation of the Possibility of Forming the Wake Flow of Large Ships by Using the Vortex Generators Second International Symposium on Marine Propulsors smp 11, Hamburg, Germany, June 2011 Numerical and Experimental Investigation of the Possibility of Forming the Wake Flow of Large Ships by Using the

More information

ITTC - Recommended Procedures and Guidelines

ITTC - Recommended Procedures and Guidelines 7.5 Page 1 of 5 Table of Contents 1. PURPOSE OF PROCEDURE... 2 2. DESCRIPTION OF PROCEDURE... 2 4. DOCUMENTATION... 4 5. REFERENCES... 4 3. PARAMETERS... 4 Updated by Approved Manoeuvring Committee of

More information

Ship Stability. Ch. 8 Curves of Stability and Stability Criteria. Spring Myung-Il Roh

Ship Stability. Ch. 8 Curves of Stability and Stability Criteria. Spring Myung-Il Roh Lecture Note of Naval Architectural Calculation Ship Stability Ch. 8 Curves of Stability and Stability Criteria Spring 2016 Myung-Il Roh Department of Naval Architecture and Ocean Engineering Seoul National

More information

RULES PUBLICATION NO. 20/P SHIP SIDE STRENGTHENING OF FISHING VESSELS MOORING AT SEA ALONGSIDE OTHER VESSELS

RULES PUBLICATION NO. 20/P SHIP SIDE STRENGTHENING OF FISHING VESSELS MOORING AT SEA ALONGSIDE OTHER VESSELS RULES PUBLICATION NO. 20/P SHIP SIDE STRENGTHENING OF FISHING VESSELS MOORING AT SEA ALONGSIDE OTHER VESSELS 1995 Publications P (Additional Rule Requirements), issued by Polski Rejestr Statków, complete

More information

IMO REVISION OF THE INTACT STABILITY CODE. Proposal of methodology of direct assessment for stability under dead ship condition. Submitted by Japan

IMO REVISION OF THE INTACT STABILITY CODE. Proposal of methodology of direct assessment for stability under dead ship condition. Submitted by Japan INTERNATIONAL MARITIME ORGANIZATION E IMO SUB-COMMITTEE ON STABILITY AND LOAD LINES AND ON FISHING VESSELS SAFETY 49th session Agenda item 5 SLF 49/5/5 19 May 2006 Original: ENGLISH REVISION OF THE INTACT

More information

RESOLUTION MSC.141(76) (adopted on 5 December 2002) REVISED MODEL TEST METHOD UNDER RESOLUTION 14 OF THE 1995 SOLAS CONFERENCE

RESOLUTION MSC.141(76) (adopted on 5 December 2002) REVISED MODEL TEST METHOD UNDER RESOLUTION 14 OF THE 1995 SOLAS CONFERENCE MSC 76/23/Add.1 RESOLUTION MSC.141(76) THE MARITIME SAFETY COMMITTEE, RECALLING Article 38(c) of the Convention on the International Maritime Organization concerning the functions of the Committee, RECALLING

More information

Ship Resistance and Propulsion Prof. Dr. P. Krishnankutty Ocean Department Indian Institute of Technology, Madras

Ship Resistance and Propulsion Prof. Dr. P. Krishnankutty Ocean Department Indian Institute of Technology, Madras Ship Resistance and Propulsion Prof. Dr. P. Krishnankutty Ocean Department Indian Institute of Technology, Madras Lecture - 7 Air and Wind Resistance Dimensional Analysis I Coming back to the class, we

More information

Special Considerations for Structural design and Fabrication for. tankers or similar vessels with Large Size (150m or more in length) in.

Special Considerations for Structural design and Fabrication for. tankers or similar vessels with Large Size (150m or more in length) in. Special Considerations for Structural design and Fabrication for tankers or similar vessels with Large Size (150m or more in length) in polar waters He. Guangwei Guangwei_ho@chinagsi.com Mai. Rongzhi MRZ@chinagsi.com

More information

Hydrostatics and Stability Dr. Hari V Warrior Department of Ocean Engineering and Naval Architecture Indian Institute of Technology, Kharagpur

Hydrostatics and Stability Dr. Hari V Warrior Department of Ocean Engineering and Naval Architecture Indian Institute of Technology, Kharagpur Hydrostatics and Stability Dr. Hari V Warrior Department of Ocean Engineering and Naval Architecture Indian Institute of Technology, Kharagpur Module No.# 01 Lecture No. # 01 Introduction Hello everybody.

More information

Background material and considerations of sea-state limitations for helicopter landing and take-off on passenger ships and ferries are undertaken.

Background material and considerations of sea-state limitations for helicopter landing and take-off on passenger ships and ferries are undertaken. 1 Annex 7 Weather Conditions and Helicopter Landing Background material and considerations of sea-state limitations for helicopter landing and take-off on passenger ships and ferries are undertaken. 1

More information

ANCHORING REQUIREMENTS FOR LARGE CONTAINER SHIPS

ANCHORING REQUIREMENTS FOR LARGE CONTAINER SHIPS ANCHORING REQUIREMENTS FOR LARGE CONTAINER SHIPS 1 INTRODUCTION 1.1 Background Some modern container ships are larger than most of the existing fleet, whose experience has been used as the basis of classification

More information

Development of TEU Type Mega Container Carrier

Development of TEU Type Mega Container Carrier Development of 8 700 TEU Type Mega Container Carrier SAKAGUCHI Katsunori : P. E. Jp, Manager, Ship & Offshore Basic Design Department, IHI Marine United Inc. TOYODA Masanobu : P. E, Jp, Ship & Offshore

More information

Common Structural Rules for Bulk Carriers, January Background Document

Common Structural Rules for Bulk Carriers, January Background Document Common Structural Rules for Bulk Carriers, January 2006 Background Document CHAPTER 4 DESIGN LOADS NOTE: - This TB is published to improve the transparency of CSRs and increase the understanding of CSRs

More information

A Feasibility Study on a New Trimaran PCC in Medium Speed

A Feasibility Study on a New Trimaran PCC in Medium Speed The 6 th International Workshop on Ship ydrodynamics, IWS 010 January 9-1, 010, arbin, China Feasibility Study on a ew Trimaran PCC in Medium Speed Tatsuhiro Mizobe 1*, Yasunori ihei 1 and Yoshiho Ikeda

More information

IACS URS11 defines the dimensioning wave load for ship design, but what does it mean from a statistical point of view?

IACS URS11 defines the dimensioning wave load for ship design, but what does it mean from a statistical point of view? IACS URS11 defines the dimensioning wave load for ship design, but what does it mean from a statistical point of view? Seamocs meeting in Malta Gaute Storhaug, DNV Maritime 19th of March 2009 Overview

More information

CRITERIA OF BOW-DIVING PHENOMENA FOR PLANING CRAFT

CRITERIA OF BOW-DIVING PHENOMENA FOR PLANING CRAFT 531 CRITERIA OF BOW-DIVING PHENOMENA FOR PLANING CRAFT Toru KATAYAMA, Graduate School of Engineering, Osaka Prefecture University (Japan) Kentarou TAMURA, Universal Shipbuilding Corporation (Japan) Yoshiho

More information

SHIP FORM DEFINITION The Shape of a Ship

SHIP FORM DEFINITION The Shape of a Ship SHIP FORM DEFINITION The Shape of a Ship The Traditional Way to Represent the Hull Form A ship's hull is a very complicated three dimensional shape. With few exceptions an equation cannot be written that

More information

INTERNATIONAL JOURNAL OF CIVIL AND STRUCTURAL ENGINEERING Volume 1, No 4, 2010

INTERNATIONAL JOURNAL OF CIVIL AND STRUCTURAL ENGINEERING Volume 1, No 4, 2010 Effect of geometric dimensions on the transmission coefficient of floating breakwaters Mohammad Hosein Tadayon, Khosro Bargi 2, Hesam Sharifian, S. Reza Hoseini - Ph.D student, Department of Civil Engineering,

More information

A Study on Roll Damping of Bilge Keels for New Non-Ballast Ship with Rounder Cross Section

A Study on Roll Damping of Bilge Keels for New Non-Ballast Ship with Rounder Cross Section International Ship Stability Workshop 2013 1 A Study on Roll Damping of Bilge Keels for New Non-Ballast Ship with Rounder Cross Section Tatsuya Miyake and Yoshiho Ikeda Department of Marine System Engineering,

More information

STABILITY OF MULTIHULLS Author: Jean Sans

STABILITY OF MULTIHULLS Author: Jean Sans STABILITY OF MULTIHULLS Author: Jean Sans (Translation of a paper dated 10/05/2006 by Simon Forbes) Introduction: The capsize of Multihulls requires a more exhaustive analysis than monohulls, even those

More information

PREDICTING THE ABILITY OF SURVIVAL AFTER DAMAGE IN TANKERS. José Poblet Martínez - SENER, (Spain) José Javier Díaz Yraola - SENER, (Spain)

PREDICTING THE ABILITY OF SURVIVAL AFTER DAMAGE IN TANKERS. José Poblet Martínez - SENER, (Spain) José Javier Díaz Yraola - SENER, (Spain) 8 th International Conference on 477 PREDICTING THE ABILITY OF SURVIVAL AFTER DAMAGE IN TANKERS Abstract José Poblet Martínez - SENER, (Spain) José Javier Díaz Yraola - SENER, (Spain) To meet the demand

More information

Ship Resistance and Propulsion Prof. Dr. P. Krishnankutty Ocean Department Indian Institute of Technology, Madras

Ship Resistance and Propulsion Prof. Dr. P. Krishnankutty Ocean Department Indian Institute of Technology, Madras Ship Resistance and Propulsion Prof. Dr. P. Krishnankutty Ocean Department Indian Institute of Technology, Madras Lecture - 6 Bulbous Bow on Ship Resistance Welcome back to the class we have been discussing

More information

Sample Application of Second Generation IMO Intact Stability Vulnerability Criteria as Updated during SLF 55

Sample Application of Second Generation IMO Intact Stability Vulnerability Criteria as Updated during SLF 55 1 Sample Application of Second Generation IMO Intact Stability Vulnerability Criteria as Updated during SLF 55 Clève Wandji, Bureau Veritas Philippe Corrignan, Bureau Veritas ABSTRACT A second generation

More information

Comparative Stability Analysis of a Frigate According to the Different Navy Rules in Waves

Comparative Stability Analysis of a Frigate According to the Different Navy Rules in Waves Comparative Stability Analysis of a Frigate According to the Different Navy Rules in Waves ABSTRACT Emre Kahramano lu, Technical University, emrek@yildiz.edu.tr Hüseyin Y lmaz,, hyilmaz@yildiz.edu.tr Burak

More information

RULES FOR CLASSIFICATION Ships. Part 3 Hull Chapter 9 Fatigue. Edition October 2015 DNV GL AS

RULES FOR CLASSIFICATION Ships. Part 3 Hull Chapter 9 Fatigue. Edition October 2015 DNV GL AS RULES FOR CLASSIFICATION Ships Edition October 2015 Part 3 Hull Chapter 9 The content of this service document is the subject of intellectual property rights reserved by ("DNV GL"). The user accepts that

More information

3D CDF MODELING OF SHIP S HEELING MOMENT DUE TO LIQUID SLOSHING IN TANKS A CASE STUDY

3D CDF MODELING OF SHIP S HEELING MOMENT DUE TO LIQUID SLOSHING IN TANKS A CASE STUDY Journal of KONES Powertrain and Transport, Vol. 17, No. 4 21 3D CDF ODELING OF SHIP S HEELING OENT DUE TO LIQUID SLOSHING IN TANKS A CASE STUDY Przemysaw Krata, Jacek Jachowski Gdynia aritime University,

More information

Structural design and loads on large yachts

Structural design and loads on large yachts Structural design and loads on large yachts Frans Verbaas and Tjepko van der Werff Senior Surveyors to Lloyd s Register Paper presented for the 17 th International Hiswa Symposium on Yacht Design and Yacht

More information

SECOND ENGINEER REG III/2 NAVAL ARCHITECTURE

SECOND ENGINEER REG III/2 NAVAL ARCHITECTURE SECOND ENGINEER REG III/2 NAVAL ARCHITECTURE LIST OF TOPICS A B C D E F G H I J Hydrostatics Simpson's Rule Ship Stability Ship Resistance Admiralty Coefficients Fuel Consumption Ship Terminology Ship

More information

TECHNICAL CIRCULAR. Circular No: S-P 32/13 Revision: 1 Page: 1 of 7 Date:

TECHNICAL CIRCULAR. Circular No: S-P 32/13 Revision: 1 Page: 1 of 7 Date: Circular No: S-P 32/13 Revision: 1 Page: 1 of 7 Date:22.05.2014 Related Requirement: UR S27 (Rev.6 June 2013) Subject: Retroactive Application for Strength Requirements for Fore Deck Fittings and Equipment

More information

Slamming Analysis on a 35,000 Ton Class of Drillship

Slamming Analysis on a 35,000 Ton Class of Drillship Slamming Analysis on a 35,000 Ton Class of Drillship Mahasin M. Ahmad, a,* Eko B. Djatmiko, b, and Handayanu, b a) Master Degree Student, Marine Technology Post-Graduate Program, Institut Teknologi Sepuluh

More information

DAMAGE STABILITY TESTS OF MODELS REPRESENTING RO-RC) FERRIES PERFORMED AT DMI

DAMAGE STABILITY TESTS OF MODELS REPRESENTING RO-RC) FERRIES PERFORMED AT DMI TECHNISCHE UNIVERSITET laboratoriurn vow Scheepshydromechareba slechlef Meketweg 2, 2628 CD. Delft Tel.: 015-788873 - Fax 015-781838 DAMAGE STABILITY TESTS OF MODELS REPRESENTING RO-RC) FERRIES PERFORMED

More information

Ship Stability September 2013 Myung-Il Roh Department of Naval Architecture and Ocean Engineering Seoul National University

Ship Stability September 2013 Myung-Il Roh Department of Naval Architecture and Ocean Engineering Seoul National University Planning Procedure of Naval Architecture and Ocean Engineering Ship Stability September 2013 Myung-Il Roh Department of Naval Architecture and Ocean Engineering Seoul National University 1 Ship Stability

More information

ITTC Recommended Procedures Testing and Extrapolation Methods Loads and Responses, Seakeeping Experiments on Rarely Occurring Events

ITTC Recommended Procedures Testing and Extrapolation Methods Loads and Responses, Seakeeping Experiments on Rarely Occurring Events Loads and Responses, Seakeeping Page 1 of 5 CONTENTS 1. PURPOSE OF PROCEDURE 2. STANDARDS FOR EXPERIMENTS ON RARELY OCCURRING EVENTS 2.1 Previous Recommendations of ITTC 2.2 Model Design and Construction

More information

IMO BULK CARRIER SAFETY. Bulk Carrier Model Test Progress Report. Submitted by the United Kingdom

IMO BULK CARRIER SAFETY. Bulk Carrier Model Test Progress Report. Submitted by the United Kingdom INERNAIONA MARIIME ORGANIZAION E IMO MARIIME SAFEY COMMIEE 75th session Agenda item 5 MSC 75/5/3 12 March 22 Original: ENGISH BUK CARRIER SAFEY Bulk Carrier Model est Progress Report Submitted by the United

More information

Shallow-Draft Ro-Pax Ships for Various Cargos and Short Lines

Shallow-Draft Ro-Pax Ships for Various Cargos and Short Lines Journal of Water Resources and Ocean Science 2017; 6(5): 65-70 http://www.sciencepublishinggroup.com/j/wros doi: 10.11648/j.wros.20170605.12 ISSN: 2328-7969 (Print); ISSN: 2328-7993 (Online) Shallow-Draft

More information

The risk assessment of ships manoeuvring on the waterways based on generalised simulation data

The risk assessment of ships manoeuvring on the waterways based on generalised simulation data Safety and Security Engineering II 411 The risk assessment of ships manoeuvring on the waterways based on generalised simulation data L. Gucma Maritime University of Szczecin, Poland Abstract This paper

More information

Marine Kit 4 Marine Kit 4 Sail Smooth, Sail Safe

Marine Kit 4 Marine Kit 4 Sail Smooth, Sail Safe Marine Kit 4 Marine Kit 4 Sail Smooth, Sail Safe Includes Basic ship Terminologies and Investigation Check list Index 1. Ship Terminology 03 2. Motions of a Floating Body...09 3. Ship Stability.10 4. Free

More information

MODELLING OF WATER FLOW ON SMALL VESSEL S DECK

MODELLING OF WATER FLOW ON SMALL VESSEL S DECK Monika Warmowska, Jan Jankowski, Polski Rejestr Statków S.A., al. gen. Józefa Hallera 126, Poland, Gdańsk, 80-416 MODELLING OF WATER FLOW ON SMALL VESSEL S DECK Summary Green water moving on deck of small

More information

IACS Common Structural Rules for Double Hull Oil Tankers, January Background Document

IACS Common Structural Rules for Double Hull Oil Tankers, January Background Document IACS Common Structural Rules for Double Hull Oil Tankers, January 2006 Background Document SECTION 7 LOADS NOTE: - This TB is published to improve the transparency of CSRs and increase the understanding

More information

RULES FOR CLASSIFICATION Ships. Part 3 Hull Chapter 5 Hull girder strength. Edition October 2015 DNV GL AS

RULES FOR CLASSIFICATION Ships. Part 3 Hull Chapter 5 Hull girder strength. Edition October 2015 DNV GL AS RULES FOR CLASSIFICATION Ships Edition October 2015 Part 3 Hull Chapter 5 The content of this service document is the subject of intellectual property rights reserved by ("DNV GL"). The user accepts that

More information

DESIGNING OF THE OFFSHORE WIND FARM INSTALLATION VESSELS (on basis of the VIDAR project)

DESIGNING OF THE OFFSHORE WIND FARM INSTALLATION VESSELS (on basis of the VIDAR project) DESIGNING OF THE OFFSHORE WIND FARM INSTALLATION VESSELS (on basis of the VIDAR project) Presented by: Tomasz Płotka - StoGda 0. StoGda Ship Design & Engineering Ltd Beginning of the StoGda Ship Design

More information

Modelling and Simulation of Environmental Disturbances

Modelling and Simulation of Environmental Disturbances Modelling and Simulation of Environmental Disturbances (Module 5) Dr Tristan Perez Centre for Complex Dynamic Systems and Control (CDSC) Prof. Thor I Fossen Department of Engineering Cybernetics 18/09/2007

More information

for Naval Aircraft Operations

for Naval Aircraft Operations Seakeeping Assessment of Large Seakeeping Assessment of Large Trimaran Trimaran for Naval Aircraft Operations for Naval Aircraft Operations Presented by Mr. Boyden Williams, Mr. Lars Henriksen (Viking

More information

Comparison of Motion Sickness Incidence (MSI) of three Crew Transfer Vessels with different hull forms. Héloïse Vignal

Comparison of Motion Sickness Incidence (MSI) of three Crew Transfer Vessels with different hull forms. Héloïse Vignal Comparison of Motion Sickness Incidence (MSI) of three Crew Transfer Vessels with different hull forms Héloïse Vignal University Supervisors : Prof. Zbigniew Sekulski, ZUT Prof. Florin Pacuraru, UGAL Industrial

More information

Figure 1: The squat effect. (Top) Ship at rest. (Bottom) Ship under way.

Figure 1: The squat effect. (Top) Ship at rest. (Bottom) Ship under way. Under-Keel Clearance of Frigates and Destroyers in Shallow Water Tim Gourlay, Centre for Marine Science and Technology, Curtin University CMST Research Report 013-53 Abstract For RAN ships operating in

More information

MSC Guidelines for Review of Rigging Systems for Sailing Vessels

MSC Guidelines for Review of Rigging Systems for Sailing Vessels S. E. HEMANN, CDR, Chief, Hull Division Table of Contents References... 1 Contact Information... 2 Applicability... 2 General Guidance... 2 Methodology... 3 Stability and Rigging System... 3 Hull Structure

More information

Abstract. 1 Introduction

Abstract. 1 Introduction Buoyancy and strength of existing bulk carriers in flooded conditions J. Jankowski, M. Bogdaniuk, T. Dobrosielski Polski Rejestr Statkow, Gdansk, Poland Email: tk@prs.gda.pl Abstract Bulk carriers have

More information

Rules for Classification and Construction Additional Rules and Guidelines

Rules for Classification and Construction Additional Rules and Guidelines VI Rules for Classification and Construction Additional Rules and Guidelines 11 Other Operations and Systems 6 Guidelines for the Preparation of Damage Stability Calculations and Damage Control Documentation

More information

Performance of SSTH-70 after Delivery and Future of SSTH Masahiro Itabashi, Ryoji Michida Ishikawajima-Harima Heavy Industries Co.,Ltd.

Performance of SSTH-70 after Delivery and Future of SSTH Masahiro Itabashi, Ryoji Michida Ishikawajima-Harima Heavy Industries Co.,Ltd. Performance of SSTH-70 after Delivery and Future of SSTH Masahiro Itabashi, Ryoji Michida Ishikawajima-Harima Heavy Industries Co.,Ltd. ABSTRUCT The SSTH-70 Ocean Arrow designed under the concept of the

More information

RESOLUTION MSC.429(98) (adopted on 9 June 2017) REVISED EXPLANATORY NOTES TO THE SOLAS CHAPTER II-1 SUBDIVISION AND DAMAGE STABILITY REGULATIONS

RESOLUTION MSC.429(98) (adopted on 9 June 2017) REVISED EXPLANATORY NOTES TO THE SOLAS CHAPTER II-1 SUBDIVISION AND DAMAGE STABILITY REGULATIONS Annex 12, page 1 ANNEX 12 RESOLUTION MSC.429(98) (adopted on 9 June 2017) THE MARITIME SAFETY COMMITTEE, RECALLING Article 28(b) of the Convention on the International Maritime Organization concerning

More information

The Usage of Propeller Tunnels For Higher Efficiency and Lower Vibration. M. Burak Şamşul

The Usage of Propeller Tunnels For Higher Efficiency and Lower Vibration. M. Burak Şamşul The Usage of Propeller Tunnels For Higher Efficiency and Lower Vibration M. Burak Şamşul ITU AYOC 2014 - Milper Pervane Teknolojileri Company Profile MILPER is established in 2011 as a Research and Development

More information

SOFTWARE. Sesam user course. 12 May 2016 HydroD Hydrostatics & Stability. Ungraded SAFER, SMARTER, GREENER DNV GL 2016

SOFTWARE. Sesam user course. 12 May 2016 HydroD Hydrostatics & Stability. Ungraded SAFER, SMARTER, GREENER DNV GL 2016 SOFTWARE Sesam user course DNV GL 1 SAFER, SMARTER, GREENER Scope of presentation Describe features & commands for performing a hydrostatic analysis, and their concepts Analysis setup Code-checking Reporting

More information

SAMPLE MAT Proceedings of the 10th International Conference on Stability of Ships

SAMPLE MAT Proceedings of the 10th International Conference on Stability of Ships and Ocean Vehicles 1 Application of Dynamic V-Lines to Naval Vessels Matthew Heywood, BMT Defence Services Ltd, mheywood@bm tdsl.co.uk David Smith, UK Ministry of Defence, DESSESea-ShipStab1@mod.uk ABSTRACT

More information

I. CHEM. E. SYMPOSIUM SERIES NO. 85

I. CHEM. E. SYMPOSIUM SERIES NO. 85 FIRE SURVIVAL OF PROCESS VESSELS CONTAINING GAS J. Nylund * The present work is a theoretical evaluation of the ability of process vessels to survive hydrocarbon fires when the vessels are designed and

More information

AMENDMENTS NO. 2/2012 to

AMENDMENTS NO. 2/2012 to RULES AMENDMENTS NO. 2/2012 to PUBLICATION NO. 84/P REQUIREMENTS CONCERNING THE CONSTRUCTION AND STRENGTH OF THE HULL AND HULL EQUIPMENT OF SEA-GOING BULK CARRIERS OF 90 M IN LENGTH AND ABOVE 2009 GDAŃSK

More information

THE PERFORMANCE OF PLANING HULLS IN TRANSITION SPEEDS

THE PERFORMANCE OF PLANING HULLS IN TRANSITION SPEEDS THE PERFORMANCE OF PLANING HULLS IN TRANSITION SPEEDS BY DOYOON KIM UNIVERSITY OF SOUTHAMPTON LIST OF CONTENTS AIM & OBJECTIVE HYDRODYNAMIC PHENOMENA OF PLANING HULLS TOWING TANK TEST RESULTS COMPUTATIONAL

More information

1. A tendency to roll or heel when turning (a known and typically constant disturbance) 2. Motion induced by surface waves of certain frequencies.

1. A tendency to roll or heel when turning (a known and typically constant disturbance) 2. Motion induced by surface waves of certain frequencies. Department of Mechanical Engineering Massachusetts Institute of Technology 2.14 Analysis and Design of Feedback Control Systems Fall 2004 October 21, 2004 Case Study on Ship Roll Control Problem Statement:

More information

Abstract. 1 Introduction

Abstract. 1 Introduction A computational method for calculatingthe instantaneous restoring coefficients for a ship moving in waves N. El-Simillawy College of Engineering and Technology, Arab Academyfor Science and Technology,

More information

Influence of rounding corners on unsteady flow and heat transfer around a square cylinder

Influence of rounding corners on unsteady flow and heat transfer around a square cylinder Influence of rounding corners on unsteady flow and heat transfer around a square cylinder S. K. Singh Deptt. of Mech. Engg., M. B. M. Engg. College / J. N. V. University, Jodhpur, Rajasthan, India Abstract

More information

Bollard Pull. Bollard Pull is, the tractive force of a tug, expressed in metric tonnes (t) or kn.

Bollard Pull. Bollard Pull is, the tractive force of a tug, expressed in metric tonnes (t) or kn. Bollard Pull (Capt. P. Zahalka, Association of Hanseatic Marine Underwriters) Bollard Pull is, the tractive force of a tug, expressed in metric tonnes (t) or kn. This figure is not accurately determinable

More information

MSC Guidelines for Review of Stability for Sailing Catamaran Small Passenger Vessels (T)

MSC Guidelines for Review of Stability for Sailing Catamaran Small Passenger Vessels (T) K.B. FERRIE, CDR, Chief, Hull Division References: a. 46 CFR Subchapter T, Parts 178, 179 b. 46 CFR Subchapter S, Parts 170, 171 c. Marine Safety Manual (MSM), Vol. IV d. Navigation and Vessel Circular

More information

Part 3 Structures, equipment Chapter 1 Design principles, design loads

Part 3 Structures, equipment Chapter 1 Design principles, design loads RULES FOR CLASSIFICATION High speed and light craft Edition December 2015 Part 3 Structures, equipment Chapter 1 The content of this service document is the subject of intellectual property rights reserved

More information

Study on Resistance of Stepped Hull Fitted With Interceptor Plate

Study on Resistance of Stepped Hull Fitted With Interceptor Plate 39 Study on Resistance of Stepped Hull Fitted With Interceptor Plate Muhamad Asyraf bin Abdul Malek, a, and J.Koto, a,b,* a) Department of Aeronautic, Automotive and Ocean Engineering, Faculty of Mechanical

More information

FUZZY MONTE CARLO METHOD FOR PROBABILITY OF CAPSIZING CALCULATION USING REGULAR AND NON-REGULAR WAVE

FUZZY MONTE CARLO METHOD FOR PROBABILITY OF CAPSIZING CALCULATION USING REGULAR AND NON-REGULAR WAVE Tomasz Hinz, Polish Registry of Shipping;Tomasz.Hinz@prs.pl Jerzy Matusiak, Aalto University School of Science and Technology FUZZY MONTE CARLO METHOD FOR PROBABILITY OF CAPSIZING CALCULATION USING REGULAR

More information

EXPERIMENTAL STUDY ON THE HYDRODYNAMIC BEHAVIORS OF TWO CONCENTRIC CYLINDERS

EXPERIMENTAL STUDY ON THE HYDRODYNAMIC BEHAVIORS OF TWO CONCENTRIC CYLINDERS EXPERIMENTAL STUDY ON THE HYDRODYNAMIC BEHAVIORS OF TWO CONCENTRIC CYLINDERS *Jeong-Rok Kim 1), Hyeok-Jun Koh ), Won-Sun Ruy 3) and Il-Hyoung Cho ) 1), 3), ) Department of Ocean System Engineering, Jeju

More information

Investigation of the Intact Stability Accident of the Multipurpose Vessel MS ROSEBURG

Investigation of the Intact Stability Accident of the Multipurpose Vessel MS ROSEBURG Proceedings of the 12th International Conference on the Stability of Investigation of the Intact Stability Accident of the Multipurpose Vessel MS ROSEBURG Adele Lübcke, Institute of Ship Design and Ship

More information

Residual Strength of Damaged Ship Hull

Residual Strength of Damaged Ship Hull Residual Strength of Damaged Ship Hull Ge Wang, Yongjun Chen, Hanqing Zhang and Yung Shin Research Department, American Bureau of Shipping 1 ABSTRACT Hull-girder residual strength after grounding was investigated

More information

Wave Forces on a Moored Vessel from Numerical Wave Model Results

Wave Forces on a Moored Vessel from Numerical Wave Model Results Wave Forces on a Moored Vessel from Numerical Wave Model Results ABSTRACT P W O BRIEN OMC International Pty Ltd, Melbourne, Australia O WEILER WL Delft Hydraulics, Delft, The Netherlands M BORSBOOM WL

More information

NUMERICAL EVALUATION OF OPERABILITY ENVELOPE FOR ULTRA LARGE CONTAINER SHIP IN EXTREME SEAS AND INFLUENCE OF MANEUVERING ON WAVE LOADS

NUMERICAL EVALUATION OF OPERABILITY ENVELOPE FOR ULTRA LARGE CONTAINER SHIP IN EXTREME SEAS AND INFLUENCE OF MANEUVERING ON WAVE LOADS Luka MUDRONJA, Faculty of Maritime Studies, University of Split, Zrinsko-Frankopanska 38, HR-21000 Split, Croatia, luka.mudronja@pfst.hr Maro ĆORAK, Faculty of Mechanical Engineering and Naval Architecture,

More information

ANNEX 5 IMO MARINE CASULATY AND INCIDENT REPORT DAMAGE CARDS* AND INTACT STABILITY CASUALTY RECORDS

ANNEX 5 IMO MARINE CASULATY AND INCIDENT REPORT DAMAGE CARDS* AND INTACT STABILITY CASUALTY RECORDS ANNEX 5 IMO MARINE CASUATY AND INCIDENT REPORT DAMAGE CARDS* AND INTACT STABIITY CASUATY RECORDS Statistics of damaged ships and of intact stability casualties are important to the work of the Organization

More information

RULES PUBLICATION NO. 86/P EXPLANATORY NOTES TO SOLAS CONVENTION AND DIRECTIVE 2003/25/EC STABILITY AND SUBDIVISION REQUIREMENTS

RULES PUBLICATION NO. 86/P EXPLANATORY NOTES TO SOLAS CONVENTION AND DIRECTIVE 2003/25/EC STABILITY AND SUBDIVISION REQUIREMENTS RULES PUBLICATION NO. 86/P EXPLANATORY NOTES TO SOLAS CONVENTION AND DIRECTIVE 2003/25/EC STABILITY AND SUBDIVISION REQUIREMENTS 2011 Publications P (Additional Rule Requirements) issued by Polski Rejestr

More information

LONGITUDINAL AIR VELOCITY CONTROL IN A ROAD TUNNEL DURING A FIRE EVENT

LONGITUDINAL AIR VELOCITY CONTROL IN A ROAD TUNNEL DURING A FIRE EVENT - 27 - LONGITUDINAL AIR VELOCITY CONTROL IN A ROAD TUNNEL DURING A FIRE EVENT R. Borchiellini, V. Ferro, V. Giaretto Energy Department Politecnico di Torino Italy ABSTRACT Ventilation equipment is used

More information

A HYDRODYNAMIC METHODOLOGY AND CFD ANALYSIS FOR PERFORMANCE PREDICTION OF STEPPED PLANING HULLS

A HYDRODYNAMIC METHODOLOGY AND CFD ANALYSIS FOR PERFORMANCE PREDICTION OF STEPPED PLANING HULLS POLISH MARITIME RESEARCH 2(86) 2015 Vol. 22; pp. 23-31 10.1515/pomr-2015-0014 A HYDRODYNAMIC METHODOLOGY AND CFD ANALYSIS FOR PERFORMANCE PREDICTION OF STEPPED PLANING HULLS Hassan Ghassemi, Assoc. Prof.

More information

Marine Construction & Welding Prof. Dr. N. R. Mandal Department of Ocean Engineering & Naval Architecture Indian Institute of Technology, Kharagpur

Marine Construction & Welding Prof. Dr. N. R. Mandal Department of Ocean Engineering & Naval Architecture Indian Institute of Technology, Kharagpur Marine Construction & Welding Prof. Dr. N. R. Mandal Department of Ocean Engineering & Naval Architecture Indian Institute of Technology, Kharagpur Lecture No # 10 Fore & Aft End Construction (Refer Slide

More information

DESIGN PRINCIPLES, DESIGN LOADS

DESIGN PRINCIPLES, DESIGN LOADS RUES FOR CASSIFICATION OF HIGH SPEED, IGHT CRAFT AND NAVA SURFACE CRAFT STRUCTURES, EQUIPMENT PART 3 CHAPTER 1 DESIGN PRINCIPES, DESIGN OADS JANUARY 2005 CONTENTS PAGE Sec. 1 Design Principles... 5 Sec.

More information

AIS data analysis for vessel behavior during strong currents and during encounters in the Botlek area in the Port of Rotterdam

AIS data analysis for vessel behavior during strong currents and during encounters in the Botlek area in the Port of Rotterdam International Workshop on Next Generation Nautical Traffic Models 2013, Delft, The Netherlands AIS data analysis for vessel behavior during strong currents and during encounters in the Botlek area in the

More information

The salient features of the 27m Ocean Shuttle Catamaran Hull Designs

The salient features of the 27m Ocean Shuttle Catamaran Hull Designs The salient features of the 27m Ocean Shuttle Catamaran Hull Designs The hull form is a semi-planing type catamaran. It employs a combination of symmetrical and asymmetrical sponson shapes, thereby combining

More information

Analysis of dilatometer test in calibration chamber

Analysis of dilatometer test in calibration chamber Analysis of dilatometer test in calibration chamber Lech Bałachowski Gdańsk University of Technology, Poland Keywords: calibration chamber, DMT, quartz sand, FEM ABSTRACT: Because DMT in calibration test

More information

The Wake Wash Prediction on an Asymmetric Catamaran Hull Form

The Wake Wash Prediction on an Asymmetric Catamaran Hull Form The Wake Wash Prediction on an Asymmetric Catamaran Hull Form Omar Yaakob, Mohd. Pauzi Abd. Ghani, Mohd. Afifi Abd. Mukti, Ahmad Nasirudin, Kamarul Baharin Tawi, Tholudin Mat Lazim Faculty of Mechanical

More information

Irrigation &Hydraulics Department lb / ft to kg/lit.

Irrigation &Hydraulics Department lb / ft to kg/lit. CAIRO UNIVERSITY FLUID MECHANICS Faculty of Engineering nd Year CIVIL ENG. Irrigation &Hydraulics Department 010-011 1. FLUID PROPERTIES 1. Identify the dimensions and units for the following engineering

More information

Lab test 4 Seakeeping test with a model of an oil tanker

Lab test 4 Seakeeping test with a model of an oil tanker Lab test 4 Seakeeping test with a model of an oil tanker The response amplitude operators (RAO) in head seas of a 1:100 scale model of a 257 m long oil tanker shall be determined by model testing in the

More information

MEDIUM SPEED CATAMARAN WITH LARGE CENTRAL BULBS: EXPERIMENTAL INVESTIGATION ON RESISTANCE AND VERTICAL MOTIONS

MEDIUM SPEED CATAMARAN WITH LARGE CENTRAL BULBS: EXPERIMENTAL INVESTIGATION ON RESISTANCE AND VERTICAL MOTIONS MEDIUM SPEED CATAMARAN WITH LARGE CENTRAL BULBS: EXPERIMENTAL INVESTIGATION ON RESISTANCE AND VERTICAL MOTIONS Igor Zotti, University of Trieste, Department D.I.N.M.A., Italy SUMMARY: It has been noticed

More information

Waves. harmonic wave wave equation one dimensional wave equation principle of wave fronts plane waves law of reflection

Waves. harmonic wave wave equation one dimensional wave equation principle of wave fronts plane waves law of reflection Waves Vocabulary mechanical wave pulse continuous periodic wave amplitude wavelength period frequency wave velocity phase transverse wave longitudinal wave intensity displacement wave number phase velocity

More information

Offshore platforms survivability to underwater explosions: part I

Offshore platforms survivability to underwater explosions: part I Computational Ballistics III 123 Offshore platforms survivability to underwater explosions: part I A. A. Motta 1, E. A. P. Silva 2, N. F. F. Ebecken 2 & T. A. Netto 2 1 Brazilian Navy Research Institute,

More information

EVALUATING CRITERIA FOR DP VESSELS

EVALUATING CRITERIA FOR DP VESSELS Journal of KONES Powertrain and Transport, Vol. 20, No. 2013 EVALUATING CRITERIA FOR DP VESSELS Jerzy Herdzik Gdynia Maritime University, Marine Power Plant Department Morska Street 81-87, 81-225 Gdynia,

More information

The OTSS System for Drift and Response Prediction of Damaged Ships

The OTSS System for Drift and Response Prediction of Damaged Ships The OTSS System for Drift and Response Prediction of Damaged Ships Shoichi Hara 1, Kunihiro Hoshino 1,Kazuhiro Yukawa 1, Jun Hasegawa 1 Katsuji Tanizawa 1, Michio Ueno 1, Kenji Yamakawa 1 1 National Maritime

More information

ITTC Recommended Procedures and Guidelines

ITTC Recommended Procedures and Guidelines Page 1 of 6 Table of Contents 1. PURPOSE...2 2. PARAMETERS...2 2.1 General Considerations...2 3 DESCRIPTION OF PROCEDURE...2 3.1 Model Design and Construction...2 3.2 Measurements...3 3.5 Execution of

More information

A STUDY OF THE LOSSES AND INTERACTIONS BETWEEN ONE OR MORE BOW THRUSTERS AND A CATAMARAN HULL

A STUDY OF THE LOSSES AND INTERACTIONS BETWEEN ONE OR MORE BOW THRUSTERS AND A CATAMARAN HULL A STUDY OF THE LOSSES AND INTERACTIONS BETWEEN ONE OR MORE BOW THRUSTERS AND A CATAMARAN HULL L Boddy and T Clarke, Austal Ships, Australia SUMMARY CFD analysis has been conducted on a 100m catamaran hull

More information

MOTION CONTROL IN WAVES OF A 140M SES

MOTION CONTROL IN WAVES OF A 140M SES OS5-2 Proceedings of the 7th JFPS International Symposium on Fluid Power, TOYAMA 2008 September 15-18, 2008 MOTION CONTROL IN WAVES OF A 140M SES Naoki OHBA*, Taketsune MATSUMURA*, Akihiko IMAKITA* * Basic

More information

Part 3 Structures, equipment Chapter 1 Hull design and construction, general

Part 3 Structures, equipment Chapter 1 Hull design and construction, general RULES FOR CLASSIFICATION Inland navigation vessels Edition December 2015 Part 3 Structures, equipment Chapter 1 Hull design and construction, general The content of this service document is the subject

More information

S0300-A6-MAN-010 CHAPTER 2 STABILITY

S0300-A6-MAN-010 CHAPTER 2 STABILITY CHAPTER 2 STABILITY 2-1 INTRODUCTION This chapter discusses the stability of intact ships and how basic stability calculations are made. Definitions of the state of equilibrium and the quality of stability

More information

UNIFIED INTERPRETATION OF PROVISIONS OF IMO SAFETY, SECURITY AND ENVIRONMENT-RELATED CONVENTIONS

UNIFIED INTERPRETATION OF PROVISIONS OF IMO SAFETY, SECURITY AND ENVIRONMENT-RELATED CONVENTIONS E SUB-COMMITTEE ON CARRIAGE OF CARGOES AND CONTAINERS 3rd session Agenda item 10 CCC 3/10/4 30 June 2016 Original: ENGLISH UNIFIED INTERPRETATION OF PROVISIONS OF IMO SAFETY, SECURITY AND ENVIRONMENT-RELATED

More information

AN UPDATE ON THE DEVELOPMENT OF THE HULL VANE

AN UPDATE ON THE DEVELOPMENT OF THE HULL VANE AN UPDATE ON THE DEVELOPMENT OF THE HULL VANE K. Uithof 1, P. van Oossanen 1,2, N. Moerke 1,2, P.G. van Oossanen 1,2, and K.S. Zaaijer 2 1 Hull Vane B.V., Costerweg 1b, 6702 AA, Wageningen, Netherlands

More information

AN INVESTIGATION INTO THE INFLUENCE OF TANK FILLING LEVEL ON LIQUID SLOSHING EFFECTS ONBOARD SHIPS - STATIC AND DYNAMIC APPROACH

AN INVESTIGATION INTO THE INFLUENCE OF TANK FILLING LEVEL ON LIQUID SLOSHING EFFECTS ONBOARD SHIPS - STATIC AND DYNAMIC APPROACH Journal of KONES Powertrain and Transport, Vol. 9, No. AN INVESTIGATION INTO THE INFLUENCE OF TANK FILLING LEVEL ON LIQUID SLOSHING EFFECTS ONBOARD SHIPS - STATIC AND DYNAMIC APPROACH Przemys aw Krata,

More information

RESOLUTION MEPC.64(36) adopted on 4 November 1994 GUIDELINES FOR APPROVAL OF ALTERNATIVE STRUCTURAL OR OPERATIONAL ARRANGEMENTS AS CALLED FOR IN

RESOLUTION MEPC.64(36) adopted on 4 November 1994 GUIDELINES FOR APPROVAL OF ALTERNATIVE STRUCTURAL OR OPERATIONAL ARRANGEMENTS AS CALLED FOR IN MEPC 36/22 THE MARINE ENVIRONMENT PROTECTION COMMITTEE, RECALLING Article 38(a) of the Convention of the International Maritime Organization concerning the function of the Committee, NOTING resolution

More information

Numerical Analysis and Experimental Tests about Water Entry of Trimaran Vessels

Numerical Analysis and Experimental Tests about Water Entry of Trimaran Vessels Numerical Analysis and Experimental Tests about Water Entry of Trimaran Vessels M. Nikfarjam, a,* O. B. Yaakob, a M. S. Seif, b J. Koto, c, d and A. Aref, b a) Marine technology centre, Universiti Teknologi

More information

Accommodating Larger Vessels: Ship Maneuverability and Channel Depth; A discussion of vessel motion in shallow water and future research needs.

Accommodating Larger Vessels: Ship Maneuverability and Channel Depth; A discussion of vessel motion in shallow water and future research needs. Accommodating Larger Vessels: Ship Maneuverability and Channel Depth; A discussion of vessel motion in shallow water and future research needs. PANELISTS: Paul Amos: President, Columbia River Pilots. Larry

More information

Ocean Transits in a 50m, 45 knot Catamaran The Minimisation of Motions and Speed Loss

Ocean Transits in a 50m, 45 knot Catamaran The Minimisation of Motions and Speed Loss Ocean Transits in a 50m, 45 knot Catamaran The Minimisation of Motions and Speed Loss Edward Dudson, Ship Design Director, Nigel Gee and Associates Ltd, UK James Roy, Senior Naval Architect, Nigel Gee

More information

THE EFFECTS OF THE HULL VANE ON SHIP MOTIONS OF FERRIES AND ROPAX VESSELS

THE EFFECTS OF THE HULL VANE ON SHIP MOTIONS OF FERRIES AND ROPAX VESSELS THE EFFECTS OF THE HULL VANE ON SHIP MOTIONS OF FERRIES AND ROPAX VESSELS K Uithof, B Bouckaert, P G van Oossanen, and N Moerke, Hull Vane B.V., van Oossanen Naval Architecture, and van Oossanen Fluid

More information