Rig Fittings. PW 8c Turn Buckle 2.5mm, 3mm or 4ba chromed brass wire type. (3mm suits 1m or M, 4ba for 10r and RA class). 3.05

Size: px
Start display at page:

Download "Rig Fittings. PW 8c Turn Buckle 2.5mm, 3mm or 4ba chromed brass wire type. (3mm suits 1m or M, 4ba for 10r and RA class). 3.05"

Transcription

1 26 PW 8c Turn Buckle 2.5mm, 3mm or 4ba chromed brass wire type. (3mm suits 1m or M, 4ba for 10r and RA class) pw8c PW 8d Turn Buckle 4ba alloy black anod. wire type, less than 1/2 weight of chromed partner 3.85 pw8d PW 8e Turn Buckle 2ba 2 long chromed 3.90 For large boats of 16kg or more. PW 9 Mast Jack 5/8,1/2, 7/16 black alum PW8e pw10b PW 10 3 Hole Bowsies Black and Yellow 0.09 PW lob White round Bowsie, drill your own holes, size 15mm x 5mm 0.05 PW 13b Backstay Arm (bent) black anod aluminium available in different lengths 2.30 PW 13c Bent Backstay Arm with plastic plug / to fit 10mm, 7/16 or 1/2 tube. Allows Backstay to be rotated or removed to allow rig to lie flat to fit in sail bag or to allow sails with luff rings or luff pocket to be slid over top of mast. Black anodised aluminium. arm kept in 4 lengths Wt. 1/3 oz PW 13d Bent Backstay Arm with plastic mast plug & injection moulded headboard rotating headboard support s/s ballraces for use with rings and luff pocket sails. Improves off wind sail shape. Black anodised aluminium specify mast size & backstay length PTFE Version 8.00 PW 13f Bent Bckstay arm with plastic plug & Insert for rotating wire headboard pw13c pw9 pw10 pw13d pw13f pw13d

2 PW 14c Spreader s/s tube small dia. 1m and M 3.30 PW14c Spreader s/s tube large dia PW 14d Clip on Spreader (black plastic) for 10.8mm, 7/16, 1/2, 12mm and 14mm tube 5.30 PW 14c PW14d pw 15 pw15e 1m Special kicker bolt for use with sunken aft deck

3 28 PW15f Ball Raced Gooseneck and Tension Strut for A, 12m and AC12. Rotates around centre,line of mast, designed for use with luff rings or pocket sails. Improves the off-wind sail shape. Supplied with Stainless Steel Ball Races to fit 17mm dia. through deck tube. all black anodised aluminium PW 15g Gooseneck and Compression strut Including the PW 21c PW16 Flow Adjuster 5/16, 3/8, 7/16 1/2 and 5/8. Made from 16g. s/s wire PW 16b Flow Spring 5/16, 3/8, 7/16 1/2 and 5/8. Made from 16g. s/s wire PW 16C stainless steel clew attachments for Areofoil booms PW16D machined alluminium clew attachment Clamps in sizes for in sizes for 3/8, 10mm 7/16,12mm, & 14mm. Check Availability 4.00 PW16E clew slide for c/f rectangular tube Needs a slot in tube 4.10 P W17 Boom Bands with eye to fit 5/16, 3/8. 7/16, 10mm, 12mm, 1/2 and 5/8 tube. Chromed brass 2.80 PW 17 Plastic Boom Bands 3/8, 10mm, 7/ PW 17a Black anod. alum. boom bands 5/16, 3/8, 10mm, 7/16, 12mm and 1/ PW17b Mast rings chromed brass 0.95 PW17c Boom bands with double eyes to fit 10mm and 3/8, 7/16, 1/2 tube 3.80 PW17 d Mast rings Black anodised machined Aluminium with one attachment points 3.15 Two attachments points 3.15 Available in sizes for 10,12 mm tubes PW 17E s/s boom band for areofoil boom 1.15 PW18 Y Shaped Spreader 4.10 PW18b Y Spreader Kit as above includes Turnbuckle, n/c shroud wire and crimps 7.60 PW16D PW16E PW16C pw17b pw16 pw15f PW17E PW16B PW17 PW17D PW17A pw18

4 29 PW21 Compression Strut short black anodised aluminium PW21b Compression Strut long, black anodised aluminium 6 or 9 inches PW21c Plate with curved base to fit booms. Chromed brass 2.60 PW21d Boom Band with plate 10mm, 12mm and 14mm 3.50 PW22 Alloy Mast Joiner/Adaptor 5/8 to 1/2 mill finish 1.80 PW22b Alloy Mast Joiner/Adaptor 5/8 to 5/8, 1/2 to 1/2, 7/16 to 7/16 mill finish of 7/16 20g. black anod. Tube to fit inside l/2 22g PW22d Alloy Mast Adapter l/2 to 3/8 mill finish 1.80 PW23 Counter Balance Weight chromed brass, 16, 22, and 34 gram. 16 guage wire supplied. Boom end must be ordered separately. (pw71b 8mm, 5/16, 3/8, 10mm, 7/ PW24 Mast Plug for 10mm, 7/16, 1/ PW24b Mast Plug for groovy state w hat size PW24c Mast plug for track system pw5, state size 2.30 PW 24d Mast Foot for 7/16 or 1/ PW31 Grommetts to fit 6mm, 5/16, 3/8, 10mm and 1/2 (pack of 10) 1.00 PW31b 0 Rings sizes as PW 31 each 0.13 PW32 Burgies (kit of parts) 4.60 PW33b Ball raced swivel tiny, about 1/8 dia. and 3/8 long 0.85 PW34 Crimps, Pack of 10 Several sizes, (ask to suit wire size) 0.34 P W35 Swing Rig Block, black anodised to fit 14mm mast and takes 10mm, 12mm, 7/6, l/2 alum. booms 6.95 PW35b Swing Rig Block, black anodised to fit 1/2 mast and takes 3/8 alum. booms 6.95 PW 33b. pw 23 pw 24b pw31 pw34 pw21/b pw21c pw 22 pw 24 pw 31b pw35 pw35b

5 PW 36 swing rig bearings PTFE please state what size mast 5.15 PW36b Swing rig bearings with ball raced bottom cup PW 44d Ball Raced Jib boom swivel mm and 10mm PW56 Detachable hounds fitting 7.60 PW56bChrome insert with wire ring for Detachable hounds 2.30 PW 62 PTFE Fairlead ring 1.50 PW63 Eyelets small for luff rings Packs of mm I/d 1.40 PW63b Eyelets large for corners Packs of 20 with washers 3.8mm I/d 1.00 pw36 pw63 pw62 pw36b 30 pw63b Pw65 Luff rings, state what size required. S/S 26g. wire 0.32 PW68 Jib gadget for swing rigs, twin Ball raced arm pivot, specify boom size PW71b Boom End in Black Acetal with jib luff fixing point 8mm, 5/16, 3/8 superlight tube, 10mm, 7/16 and 1/ Plastic Oval Boom End to suit our tube 2.75 PW72 Snap links (black) size 4 x 24mm in length, pack of 10, or size 2 x 16mm 0.70 PW73 Thumbwheel for Sails etc rectangular boom fitting 2.5mm thread 1.05 PW74 90 degree hooks s/s pack of PW74B Z hooks each 0.50 PW 75 Parrot Perch (Jib luff support) 1.80 PW 76 Angled black alum. Joiner to fit 8mm or 10mm tube PW 77 Hook Strap s/s, supplied with 2 x 2g s/s self tappers. PW pw71b pw71b pw65 PW76 pw68 pw74 pw 74B pw72 pw73

FDR CHRYSLER 16' CATAMARAN (MUSKETEER) The initial rigging of a sailboat is not difficult, but if the boat is strange

FDR CHRYSLER 16' CATAMARAN (MUSKETEER) The initial rigging of a sailboat is not difficult, but if the boat is strange Page of 6 Revised 2/0/76 RIGGING INSTRUCTIONS FDR CHRYSLER 6' CATAMARAN (MUSKETEER) The initial rigging of a sailboat is not difficult, but if the boat is strange to the new owner, or the new owner is

More information

IOM RIGS AND SAILS CERTIFICATION CONTROL - CHECK LIST FORM 2017

IOM RIGS AND SAILS CERTIFICATION CONTROL - CHECK LIST FORM 2017 INTERNATIONAL ONE METRE CLASS 2017 RIGS AND SAILS CERTIFICATION CONTROL - CHECK LIST FORM RIGS AND SAILS CONTROLLED 1 2 3 (circle, or cross out as appropriate) Hull Registration Number... Certification

More information

Telescopic winch handle Speedfriend"

Telescopic winch handle Speedfriend Winch handles, jib furlers JIB FURLERS - WINCH HANDLES - SPREADER COVERS 57 Floating winch handles Floating universal size winch handles Fitted with "Lock In" winch system; universal size for any winch;

More information

The USA Canterbury J. Class Rules

The USA Canterbury J. Class Rules Canterbury J Class Owners Association The USA Canterbury J Class Rules 2010 As Accepted 2008 and Revised February 2010 Published March 2010 The Canterbury J Class Rules ~ 2008 Page 1 of 10 THE CANTERBURY

More information

2012-June-12 SECOND DRAFT Hobie Getaway Spinnaker Installation Instructions

2012-June-12 SECOND DRAFT Hobie Getaway Spinnaker Installation Instructions SECTION A: INTRODUCTION This unofficial set of installation instructions was written for a 2009 Hobie Getaway, using a 2012 Hobie Spinnaker Kit 20999020. Note from the Author: I had never seen this kit

More information

CR 914 Class Rules. Revised July 15, 2000 See also CR-914 Class Rule Interpretations

CR 914 Class Rules. Revised July 15, 2000 See also CR-914 Class Rule Interpretations CR 914 Class Rules Revised July 15, 2000 See also CR-914 Class Rule Interpretations 1 GENERAL - CLASS: The CR 914 is a One-Design class. The Class objective is that the sailing skills of the skipper shall

More information

Appendix 1: How To Install the Northeaster Dory Sailing Component Kit Upgrade

Appendix 1: How To Install the Northeaster Dory Sailing Component Kit Upgrade Appendix 1: How To Install the Northeaster Dory Sailing Component Kit Upgrade 143 Northeaster Dory Sailing Rig Upgrades: Adding sail track, an outhaul, and camcleats for the jib We ll start with the mast.

More information

ASSEMBLY MANUAL HOBIE CATSY

ASSEMBLY MANUAL HOBIE CATSY ASSEMBLY MANUAL HOBIE CATSY HOBIE CAT EUROPE ZI Toulon Est, BP 50 8078 Toulon cedex 9, France Tel : + (0)9 08 78 78 - Fax : + (0)9 08 99 Email : hobiecat@hobie-cat.net - http://www.hobie-cat.net ASSEMBLY

More information

OH MARINE EQUIPMENT made to last

OH MARINE EQUIPMENT made to last OH Fairlead thimbles (round) OH Marine Equipment has made a new product: OH fairlead thimbles (round). The thimbles can be spliced into control lines and are used to deflect sheets and control lines or

More information

ODOM CLASS SPECIFICATIONS

ODOM CLASS SPECIFICATIONS ODOM CLASS SPECIFICATIONS Effective March 1, 2004 1. GENERAL 1.1 Purpose of the Measurement Rules 1.1.1 The ODOM is a One-Design Class as defined by the American Model Yachting Association (AMYA). However,

More information

1 MAY A division of Rolly Tasker Sails (Thailand) Co Ltd., 84/2 Moo 2, Chaofa Road, T. Vichit, A. Muang, Phuket 83000, Thailand

1 MAY A division of Rolly Tasker Sails (Thailand) Co Ltd., 84/2 Moo 2, Chaofa Road, T. Vichit, A. Muang, Phuket 83000, Thailand 1 MAY 2011 A division of Rolly Tasker Sails (Thailand) Co Ltd., 84/2 Moo 2, Chaofa Road, T. Vichit, A. Muang, Phuket 83000, Thailand STORAGE FOR SAIL PARTS CNC MACHINE CENTRE 1 1 DEADEYE ID 19 mm. 6C

More information

FITTING INSTRUCTIONS FOR CASCADE LIGHTWEIGHT LAZY JACK KITS For yachts up to 10.5m (35ft) Part No

FITTING INSTRUCTIONS FOR CASCADE LIGHTWEIGHT LAZY JACK KITS For yachts up to 10.5m (35ft) Part No FITTING INSTRUCTIONS FOR CASCADE LIGHTWEIGHT LAZY JACK KITS For yachts up to 10.5m (35ft) Part No. 41 143 The lightweight Lazy Jack System allows the mainsail to be easily reefed or stowed in all weather

More information

Fitting Instructions For Slab Reefing Kit Part No For Yachts Up To 8.5m (2 Reefing Points)

Fitting Instructions For Slab Reefing Kit Part No For Yachts Up To 8.5m (2 Reefing Points) Fitting Instructions For Slab Reefing Kit Part No 41483 For Yachts Up To 8.5m (2 Reefing Points) This system makes reefing your mainsail a quick and easy operation. Just lower the mainsail just below a

More information

Pico rigging manual 2007.doc Page 1 of 28

Pico rigging manual 2007.doc Page 1 of 28 Pico rigging manual 2007.doc Page 1 of 28 Pico Rigging Instructions The Pico rigging instructions are a guide to rigging your boat. Due to production supplies certain parts may be slightly modified from

More information

AMYA SeaWind Class Rules

AMYA SeaWind Class Rules AMYA SeaWind Class Rules Revised 4/1/2011 1 GENERAL - CLASS: The SeaWind is a one design class. The class objective is competition where the skill of the skipper in sailing and adjusting his boat will

More information

DRAGONFLITE 95 RESTRICTED CLASS RULES 2016

DRAGONFLITE 95 RESTRICTED CLASS RULES 2016 DragonFlite Force 95, Restricted Class Rules 2016 2013 Version 1.2 1.0 DRAGONFLITE 95 RESTRICTED CLASS RULES 2016 Version 1.2 DF Racing Rules Committee 2016 Introduction The DragonFlite 95 (DF95) project

More information

TUNE YOUR SAILS SPEED. Etchells Tuning Guide. Rev Q04

TUNE YOUR SAILS SPEED. Etchells Tuning Guide. Rev Q04 TUNE YOUR SAILS FOR OUTRIGHT SPEED Congratulation on your purchase of North One Design Etchells sails. The following tuning guide is meant to be a good starting point in setting your Etchells rig and sails.

More information

INTERNATIONAL FLYING FIFTEEN CLASS MEASUREMENT FORM

INTERNATIONAL FLYING FIFTEEN CLASS MEASUREMENT FORM INTERNATIONAL FLYING FIFTEEN CLASS MEASUREMENT FORM 2014 Authority: * International Sailing Federation, Ariadne House, Town Quay, Southampton, Hampshire, SO14 2AQ, UK IN ORDER TO OBTAIN A MEASUREMENT CERTIFICATE

More information

AMYA SeaWind Class Rules

AMYA SeaWind Class Rules AMYA SeaWind Class Rules Revised 4/1/2013 1 GENERAL - CLASS: The SeaWind is a one design class. The class objective is competition where the skill of the skipper in sailing and adjusting his boat will

More information

DRAGONFLITE 95 RESTRICTED CLASS RULES 2016

DRAGONFLITE 95 RESTRICTED CLASS RULES 2016 DragonFlite Force 95, Restricted Class Rules 2016 2013 Version 1.0 DRAGONFLITE 95 RESTRICTED CLASS RULES 2016 Version 1.0 DF Racing Rules Committee 2016 Introduction The DragonFlite 95 (DF95) project started

More information

SHIELDS PARTS PRICE SHEET

SHIELDS PARTS PRICE SHEET 7 Narrows Road * P.O. Box 152 * Wareham, MA 02571-0152 * Phone (508) 295-3550 * Fax (508) 295-3551 www.capecodshipbuilding.com * info@capecodshipbuilding.com SHIELDS PARTS PRICE SHEET Part Number DESCRIPTION

More information

Essential Rig Tuning Guide The Ins and Outs of tuning your mast.

Essential Rig Tuning Guide The Ins and Outs of tuning your mast. Essential Rig Tuning Guide The Ins and Outs of tuning your mast. Tuning Your Rig The main goal in tuning your mast is to achieve a spar that s straight. By doing this it will help you gain control of sail

More information

TUNE YOUR SAILS SPEED

TUNE YOUR SAILS SPEED TUNE YOUR SAILS FOR OUTRIGHT SPEED Rev R05 Important Notes l We recommend not exceeding 350lbs total crew weight as this puts excess stress on the mast and the boat. l When sailing, the boat performs best

More information

TUNE YOUR SAILS SPEED. Viper 640 Tuning Guide. Rev. R03b

TUNE YOUR SAILS SPEED. Viper 640 Tuning Guide. Rev. R03b TUNE YOUR SAILS FOR OUTRIGHT SPEED Mast Tuning Tuning Guide for the Carbon Mast SET SPREADER ANGLE Check spreader angle by placing a straightedge or string from shroud to shroud at the spreaders. Measure

More information

Table of content Introduction 5 1. Part 1. Assembly Tools needed for Assembly Glossary Hulls Mounting the beams 7

Table of content Introduction 5 1. Part 1. Assembly Tools needed for Assembly Glossary Hulls Mounting the beams 7 Table of content Introduction 5 1. Part 1. Assembly 6 1.1. Tools needed for Assembly 6 1.2. Glossary 6 1.3. Hulls 7 1.3.1. Mounting the beams 7 1.3.2. Fixing the mast rotation cleats 8 1.3.3. Placing the

More information

2. Note that the ropes from the rigging board are secured in the cam cleats of the jib fairleads.

2. Note that the ropes from the rigging board are secured in the cam cleats of the jib fairleads. VII 1. Place the hull, bow into wind, on its trailer, a soft surface, or a rigging board. We strongly recommend making a rigging board; it is simple and inexpensive and greatly simplifies rigging and working

More information

RIGGING INSTRUCTIONS Let's assume that you have your boat on a trailer when you take delivery from your dealer.

RIGGING INSTRUCTIONS Let's assume that you have your boat on a trailer when you take delivery from your dealer. This is the original owner's manual, written about 1972, and applicable for boats manufactured through 1978. Starting in 1979 a few changes were made in the roller furling jib and forestay arrangement.

More information

AUSTRALIAN ARROW AND ARAFURA CADET ASSOCIATION ARROW CATAMARAN RESTRICTIONS AND MEASUREMENT CERTIFICATE

AUSTRALIAN ARROW AND ARAFURA CADET ASSOCIATION ARROW CATAMARAN RESTRICTIONS AND MEASUREMENT CERTIFICATE AUSTRALIAN ARROW AND ARAFURA CADET ASSOCIATION ARROW CATAMARAN RESTRICTIONS AND MEASUREMENT CERTIFICATE 1 NOTE: The object of these restrictions is to provide uniform specifications and restrictions for

More information

SailTrack Installation Instructions. External Track

SailTrack Installation Instructions. External Track SailTrack Installation Instructions External Track SH-500 SS SH-401 SS SH-600 SS SH-200B SS SH-200A SS www.tidesmarine.com Before You Begin Your installation will be easier if you move the boom well off

More information

Bladerider X8 Assembly Help Notes

Bladerider X8 Assembly Help Notes 2.1 Remove All Parts & Have Some Tools Handy Remove all items from the box and identify each part as per the packing sheet and check that nothing is missing. If there is something missing, please email

More information

INTERNATIONAL ONE METRE CLASS

INTERNATIONAL ONE METRE CLASS 1 An official measurer shall carry out certification control by checking all items on the boat for compliance with the IOM class rule against the certification control - checklists for Hull & Appendages

More information

AMYA Soling 50 Class Rules

AMYA Soling 50 Class Rules AMYA Soling 50 Class Rules - 2009 Overall General Specifications Length = 50 Overall Beam = 12 1/8 Overall Draft = 11 Sail Area = 800 Square Inches Displacement = 17 lbs. Minimum Mast Height = 61-1/4 Maximum

More information

Riggers and Associated Parts

Riggers and Associated Parts Riggers and Associated Parts Pins are all 13mm shafts, with 8x27mm tops, and supplied with washers, nuts and spacers. Rig 1A-sc 13x105mm shaft, 10x55mm base - for scull & sweep Carbon wing S/S yes 28.57

More information

SailTrack Installation Instructions. CMPE Track

SailTrack Installation Instructions. CMPE Track SailTrack Installation Instructions CMPE Track SH-500 SS SH-401 SS SH-200B SS SH-600 SS SH-200A SS www.tidesmarine.com This Tides Marine Sail Track System is used to attach a Tides Track to a bare carbon

More information

Highlander Specifications

Highlander Specifications Highlander Specifications March 14, 2019 Highlander Specifications The intent of this section is to clarify and add to what is shown in the official plans. In case of conflict between these specifications

More information

Wysiwig - Wayfarer Rigging Guide

Wysiwig - Wayfarer Rigging Guide Wysiwig - Wayfarer 8767 - Rigging Guide GENERAL NOTES Before you go afloat, make sure that the self-bailer is closed. It is operated through the cut-out in the starboard floorboard. If you do not close

More information

Follow these easy steps to properly assemble your new Zim 420

Follow these easy steps to properly assemble your new Zim 420 Thank you for buying a Zim 420 and welcome to the Zim Sailing family. We are extremely proud of the quality of our boats and the race results are proven. Many of the top sailors are choosing Zim over other

More information

Paper Tiger Catamaran International Association MEASUREMENT FORM

Paper Tiger Catamaran International Association MEASUREMENT FORM Paper Tiger Catamaran International Association MEASUREMENT FORM Amended June 2000: July 2002: April 2012 Name of boat: Sail No: Owner s name: Owner s address: Postcode: Phone: (H) (B) (Mob.) Email: Owner

More information

420 Rigging Guide.

420 Rigging Guide. A smaller version of the olympic 470 class, the 420 was formerly a youth development class. It has a good class following, and is a good introduction to performance boats. With a PY number of 1087 it s

More information

New Product Update - September 2017

New Product Update - September 2017 New Product Update September 2017 Series 1 Ball Bearing Utility Blocks Available Now With a sheave diameter of 1mm these are the smallest and lightest ball bearing blocks available! The single block delivers

More information

OPPI Rigging Guide 3/2008

OPPI Rigging Guide 3/2008 OPPI Rigging Guide 3/2008 McLaughlin Boat Works optistuff.com Thanks for purchasing OPPI, the most durable and F-U-N sailboat available. Rigging your OPPI is easy and the following pictures make it a breeze

More information

NSW EC 12 ONE DESIGN CLASS CLASS RULES

NSW EC 12 ONE DESIGN CLASS CLASS RULES INTRODUCTION NSW EC 12 ONE DESIGN CLASS CLASS RULES 2014 The class began as a towing tank testing model for a proposed design to defend the America Cup. The designer was Charles Morgan and the nick-name

More information

Making Spars for the Schooner Jeanette

Making Spars for the Schooner Jeanette Making Spars for the Schooner Jeanette..... by Byron Rosenbaum Figure 1. Byron Rosenbaum s 1:16-scale radio-controlled model of the schooner Jeanette. All photographs by the builder. The spars required

More information

Dinghy Racers Parts List

Dinghy Racers Parts List Parts List Thank you for your purchase of our Dinghy Racer whirligig set. Please check this list before assembly of your new Dinghy Racer set to make sure that you have all of the parts listed. 1-Yellow

More information

RADIO CONTROL MODEL YACHT BUDGIE ONE DESIGN CLASS CLASS RULES

RADIO CONTROL MODEL YACHT BUDGIE ONE DESIGN CLASS CLASS RULES 1 RADIO CONTROL MODEL YACHT BUDGIE ONE DESIGN CLASS CLASS RULES 1. INTRODUCTION 2. BUDGIE CLASS SPECIFICATION 3. CLASS PHILOSOPHY 4. HULL AND DECK 5. KEEL / BULB AND RUDDER 6. DECK FITTINGS 7. SPARS AND

More information

ASA104 Instructions Page 1

ASA104 Instructions Page 1 ASA104 Instructions Page 1 Main Maststep Fore Maststep Aft (Stern) Fore (Bow) Main Mast Shrouds Mizzen Mast Shrouds Bowsprit Shrouds End of Bowsprit To begin: Place the ship in the stand. Carefully unroll

More information

ASSEMBLY MANUAL. Last up-date : January 2005 HOBIE MAX RACE

ASSEMBLY MANUAL. Last up-date : January 2005 HOBIE MAX RACE ASSEMBLY MANUAL Last up-date : January 005 HOBIE MAX RACE List of the parts Necessary tools spanners nr 7 It is advisable to be at least two people to assemble the Hobie Max pair of niversal pliers TABLE

More information

THE ADAMS 10 METRE YACHT ASSOCIATION INC. ACN CLASS RULES JANUARY 2002

THE ADAMS 10 METRE YACHT ASSOCIATION INC. ACN CLASS RULES JANUARY 2002 THE ADAMS 10 METRE YACHT ASSOCIATION INC. ACN 232 3640 CLASS RULES JANUARY 2002 1.00 PREAMBLE 1.10 The Adams 10 Metre Yacht was conceived as a one design yacht suitable for harbour and ocean racing as

More information

CR-914 Kit Assembly Instructions Revised Oct 16, 2001

CR-914 Kit Assembly Instructions Revised Oct 16, 2001 Parts Inventory CR-914 Kit Assembly Instructions Revised Oct 16, 2001 Read these instructions before starting to build the boat. Parts list continued on the next page Parts list Continued - Upgrade Kit

More information

Topaz OMEGA Rigging Instructions

Topaz OMEGA Rigging Instructions Topaz OMEGA Rigging Instructions www.toppersailboats.com TOPAZ OMEGA RIGGING INSTRUCTIONS CONTENTS 02. Introduction 02. Manufacturers Details 03. Maintenance 04. Raising the Mast 05. Attaching the Boom

More information

Sail Measurement Form

Sail Measurement Form Sail Measurement Form Yelkenbicer's database of boat rig specifications is extensive and in most cases, no further information is required to prepare a sail. However, if your boat's rig is custom or has

More information

Highlander Specifications (DRAFT UNAPPROVED)

Highlander Specifications (DRAFT UNAPPROVED) Highlander Specifications March 26, 2014 Highlander Specifications (DRAFT UNAPPROVED) The intent of this section is to clarify and add to what is shown in the official plans. In case of conflict between

More information

Club 420 Class Rigging Manual

Club 420 Class Rigging Manual Club 420 Class Rigging Manual Performance sailcraft 2000 Inc 2555 Dollard Lasalle, Quebec, H8N 3A9 Tel: 514 363 5050 email: info @ps2000.ca Website: www.ps2000.ca Mast set up Remove the pole and unwrap

More information

Highlander Specifications

Highlander Specifications Highlander Specifications July 22, 2012 Highlander Specifications The intent of this section is to clarify and add to what is shown in the official plans. In case of conflict between these specifications

More information

PROFURL IN-BOOM REEFING SYSTEM MK 2 R SERIAL NUMBER :... INSTALLATION MANUAL

PROFURL IN-BOOM REEFING SYSTEM MK 2 R SERIAL NUMBER :... INSTALLATION MANUAL 08/07/13 P140GB13 C MK 2R PROFURL IN-BOOM REEFING SYSTEM MK 2 R SERIAL NUMBER :... INSTALLATION MANUAL IMPORTANT NOTICE TO RIGGERS : PLEASE GIVE THIS MANUAL TO THE BOAT OWNER AND ASK HIM (HER) TO CAREFULLY

More information

An Australian Classic by spectre.com

An Australian Classic by   spectre.com An Australian Classic by www.go spectre.com Your Bug! Welcome to the Balain Bug experience!!!!!! The Bug kit has been designed so as to be a modern version of the Traditional Bug now you can sail like

More information

PT Series Tension Gauges

PT Series Tension Gauges PT Series Tension Gauges Model PT-1 Cable size 3/32", 1/8", 5/32" Model PT-1M Cable size 2.5mm, 3mm, 4mm Model PT-2 Cable size 3/16", 7/32", 1/4" Model PT-2M Cable size 5mm, 6mm, 7mm Model PT-3 Cable size

More information

2008 Swan 42 Tuning Guide.

2008 Swan 42 Tuning Guide. 2008 Swan 42 Tuning Guide. *The information in this guide applies to North 3DL Swan 42 Class sails only. Before going sailing: 1-Step mast with mast butt 4.2 cm aft of the bulkhead. Set mast at deck level

More information

Tuning Guide January 2012

Tuning Guide January 2012 Tuning Guide January 2012 www.skud.org This tuning guide has been prepared by the IACA SKUD 18 Committee to assist new sailors in the SKUD 18 class to prepare their MkI or MkII boat to a competitive level

More information

NEW ZEALAND EC12 ONE-DESIGN CLASS RULES

NEW ZEALAND EC12 ONE-DESIGN CLASS RULES 12 NEW ZEALAND EC12 ONE-DESIGN CLASS RULES NZ EC12 2010 NEW ZEALAND EC12 ONE DESIGN CLASS CLASS RULES 2010 (March) Authority: New Zealand EC12 Owners Association Inc. TABLE OF CONTENTS 1.0 GENERAL 1.1

More information

- Written price quotations are valid for 30 days from the date of the quote unless otherwise noted.

- Written price quotations are valid for 30 days from the date of the quote unless otherwise noted. SPECIFICATIONS - All material is solid brass with a #8 mirror finish unless otherwise noted. - All material sold by length is priced in one foot increments. ORDERING PROCEDURE - Use a Purchase Order number.

More information

NEW ZEALAND EC12 ONE-DESIGN CLASS RULES

NEW ZEALAND EC12 ONE-DESIGN CLASS RULES 12 NEW ZEALAND EC12 ONE-DESIGN CLASS RULES NZ EC12 2014 NEW ZEALAND EC12 ONE DESIGN CLASS CLASS RULES 2014 (February) Authority: New Zealand EC12 Owners Association Inc. Table of Contents INTRODUCTION

More information

HOBIE TEDDY ASSEMBLY MANUAL

HOBIE TEDDY ASSEMBLY MANUAL ASSEMBLY MANUAL HOBIE TEDDY HOBIE CAT EUROPE ZI Toulon Est, BP 50 83078 Toulon cedex 9, France Tel : +33 (0)494 08 78 78 - Fax : +33 (0)494 08 3 99 Email : info@hobie-cat.net - http://www.hobie-cat.net

More information

INSTRUCTION NO

INSTRUCTION NO INSTRUCTION NO. 14138 Dagger Rigging Instr. P~e 2.of 6 MODEL 244 CHRYSLER "DAGGER" SAILBOAT RIGGING INSTRUCTIONS We, at Chrysler Boat Corporation, congratulate you on your selection of our Model 244 "Dagger"

More information

Vanguard Sailboats 300 Highpoint Avenue Portsmouth, RI For the dealer nearest you call SAIL

Vanguard Sailboats 300 Highpoint Avenue Portsmouth, RI For the dealer nearest you call SAIL Vanguard Sailboats 300 Highpoint Avenue Portsmouth, RI 02871 For the dealer nearest you call 800. 966.SAIL Unpack the major parts listed below and lay them out on a soft piece of ground free of sharp objects.

More information

Index 1. Trampoline 2. Main Foils 3. Spinnaker Pole 4. Mast Setup 5. Mast Rigging 6. Rig Tension 7. Trapeze Lines 8. Rudders 9. Boom 10. Main Sheet an

Index 1. Trampoline 2. Main Foils 3. Spinnaker Pole 4. Mast Setup 5. Mast Rigging 6. Rig Tension 7. Trapeze Lines 8. Rudders 9. Boom 10. Main Sheet an By User Manual Index 1. Trampoline 2. Main Foils 3. Spinnaker Pole 4. Mast Setup 5. Mast Rigging 6. Rig Tension 7. Trapeze Lines 8. Rudders 9. Boom 10. Main Sheet and Traveler 11. Main Sail 12. Downhaul

More information

TUNE YOUR SAILS SPEED. J/80 Tuning Guide. Rev R12a

TUNE YOUR SAILS SPEED. J/80 Tuning Guide. Rev R12a TUNE YOUR SAILS FOR OUTRIGHT SPEED J/80 Tuning Guide Rev R12a This Tuning Guide was written to help you get the most performance out of your J/80. North Sails has been sailing J/80s since they were first

More information

aero naut Order No. 3009/00

aero naut Order No. 3009/00 aero naut Order No. 3009/00 Introduction: The model should be assembled following the sequence of the stages of construction described in these instructions. The laser-cut components are individually numbered.

More information

Bowsprit Hinge on "Bumble Chugger" By Robin Whittle, Shrimper 124 (Bumble Chugger) (Winter 2003)

Bowsprit Hinge on Bumble Chugger By Robin Whittle, Shrimper 124 (Bumble Chugger) (Winter 2003) Bowsprit Hinge on "Bumble Chugger" By Robin Whittle, Shrimper 124 (Bumble Chugger) (Winter 2003) In April 2003 Practical Boat Owner (PBO) published an article which I had written on the use of the bowsprit

More information

HoldUp Plus2. Safety Kit included: See additional instructions for installation. REAR WHEEL TRAY. BASE (1x) lock WASHER (1x) KEY (2x) SAFETY CLIP (1x)

HoldUp Plus2. Safety Kit included: See additional instructions for installation. REAR WHEEL TRAY. BASE (1x) lock WASHER (1x) KEY (2x) SAFETY CLIP (1x) HoldUp Plus2 InsTAll This product on 2" hitch version of the HoldUp Front WHEEL TRAY assembly (1x) REAR WHEEL TRAY assembly (1x) wrench (1x) BASE (1x) bolt (8X) Lock WASHER (8X) Washer (8x) KEY (2x) SAFETY

More information

Swan 42 TUNE YOUR RIG FOR OUTRIGHT SPEED. Swan 42 Tuning Guide Solutions for today s sailors

Swan 42 TUNE YOUR RIG FOR OUTRIGHT SPEED. Swan 42 Tuning Guide Solutions for today s sailors 1 Swan 42 TUNE YOUR RIG FOR OUTRIGHT SPEED 2 Swan 42 The information in this guide applies to North 3DL and 3Di Swan 42 Class sails only. The North Sails Swan 42 Tuning System is designed and regatta proven

More information

Ref :MMHC14SR_GB Emetteur :MF Date :Dec 2014 Revision : 1 Page 1/18. ASSEMBLY MANUAL : HOBIE CAT 14 Std & Race HOBIE CAT 14 STD & RACE

Ref :MMHC14SR_GB Emetteur :MF Date :Dec 2014 Revision : 1 Page 1/18. ASSEMBLY MANUAL : HOBIE CAT 14 Std & Race HOBIE CAT 14 STD & RACE Ref :MMHC14SR_GB Emetteur :MF Date :Dec 2014 Revision : 1 Page 1/18 HOBIE CAT 14 STD & RACE Ref :MMHC14SR_GB Emetteur :MF Date :Dec 2014 Revision : 1 Page 2/18 TABLE OF CONTENT Part list... 3 Ropes and

More information

RUDDER & TILLER HARDWARE Battlestick Tiller Extensions - Features & Information 77 Battlestick Tiller Extensions 78 Rudder Hardware 79

RUDDER & TILLER HARDWARE Battlestick Tiller Extensions - Features & Information 77 Battlestick Tiller Extensions 78 Rudder Hardware 79 One of the best parts about working at Ronstan is getting to know the diverse range of sailors that we interact with every day. Whether we are talking to world-class racing sailors, a young newcomer to

More information

PROFURL IN-BOOM REEFING SYSTEM MK 3 R SERIAL NUMBER :... INSTALLATION MANUAL

PROFURL IN-BOOM REEFING SYSTEM MK 3 R SERIAL NUMBER :... INSTALLATION MANUAL 13/09/13 I P142GB13D MK 3R PROFURL IN-BOOM REEFING SYSTEM MK 3 R SERIAL NUMBER :... INSTALLATION MANUAL IMPORTANT NOTICE TO RIGGERS : PLEASE GIVE THIS MANUAL TO THE BOAT OWNER AND ASK HIM (HER) TO CAREFULLY

More information

Specification of Monotype-XV Accepted 1993

Specification of Monotype-XV Accepted 1993 Specification of Monotype-XV Accepted 1993 3. CONSTRUCTION AND MEASUREMENT RULES 3.1 FUSELAGE MAX MIN 3.1.1 Length overall 7465 7435 3.1.2 Distance from bow to mast step pivoting point(middle hole of the

More information

SPARE PARTS WORKBOOK

SPARE PARTS WORKBOOK SPARE PARTS WORKBOOK Hull Parts - Bow Area 0 0 RS Feva Foredeck FEV-HF-00 Pozzi pan screw x / FIX-S-P0 Washer M 'A' FIX-W-00 00mm Black Dacron Patch ZDP00 Allen Hatch Inch: Sealing Ring A Pozzi pan screw

More information

SPARE PARTS WORKBOOK

SPARE PARTS WORKBOOK SPARE PARTS WORKBOOK Hull Parts - Bow Area RS Quba Foredeck QUB-FX-00 RS Feva Mast Gate (Post 0 Hex Head Recess) FEV-HF-00 Button head machine screw M x 0 FIX-B-B0 RS Feva / Quba Mast Gate Fastening Bolt

More information

and 5 plank hull construction method Jig & Correx panels Fitting panels to jig

and 5 plank hull construction method Jig & Correx panels Fitting panels to jig A Footy design by Roger Stollery Design drawings, hull panels, hull former parts and foils illustrated with photos and references to the BUG 3 design. A 500 gram development of the ANT design with less

More information

SPARE PARTS WORKBOOK

SPARE PARTS WORKBOOK SPARE PARTS WORKBOOK Hull Parts - Bow Area 7 8 6 0 Allen Hatch Inch: Sealing Ring A8 Allen Hatch Inch: Black A7BLACK Pozzi pan screw 6 x / FIX-S6-P0 Allen Hatch Inch: Black A7BLACK SCK CSK M/SCREW M6 X

More information

J/70 Building Specification

J/70 Building Specification DECK, HARDWARE AND FITTINGS 1 FRP Composite deck 2 Indeck furler unit 3 Bow "U" bolt mooring eye (stainless) Option for one 6" (152mm) mooring cleat in lieu of eye. 4 Shroud chainplates (stainless) (BSI

More information

Keel-stepped and deck-stepped masts,

Keel-stepped and deck-stepped masts, Keel-stepped and deck-stepped masts, C-sections and F-sections The T-base and deck ring systems are made to fit both Seldén s conventional mast sections and their matching furling sections. They are also

More information

Tower Accessories & Hardware

Tower Accessories & Hardware Safety-Climb Cable System for Climbing Ladder These Safety-Climb Cable products clamp to climbing ladder rungs up to 1-1/4" (32 mm) in diameter. The products meet or exceed OSH requirements for climbing

More information

Furlex 104S-404S (Standard)

Furlex 104S-404S (Standard) 104S-404S (Standard) The 4th generation of an icon The fourth generation of is an uncompromising evolution of the world s best selling jib furling and reefing system. Proven design blended with innovation

More information

Rigging Manual. 1 Parts of the Hull. 2 Parts of the Sail. 3 Sunfish Mast Kit. 4 Bailer Installation. 5 Ratchet Block Installation

Rigging Manual. 1 Parts of the Hull. 2 Parts of the Sail. 3 Sunfish Mast Kit. 4 Bailer Installation. 5 Ratchet Block Installation SUNFISH SUNFISH RACE SUNFISH Rigging Manual 1 Parts of the Hull Go-fast tip number one: Read this rigging guide first. 2 Parts of the Sail 3 Sunfish Mast Kit 4 Bailer Installation 5 Ratchet Block Installation

More information

COASTAL IN-BOOM FURLING SYSTEM. Installation Manual

COASTAL IN-BOOM FURLING SYSTEM. Installation Manual COASTAL IN-BOOM FURLING SYSTEM Installation Manual 1 TABLE OF CONTENTS Page Number 3. Disclaimer 4. Components packing list & required tools 5. Gooseneck bracket location 6. Installation sail track 7.

More information

HD Sails Scorpion Tuning Guide. Tom Jeffcoate

HD Sails Scorpion Tuning Guide. Tom Jeffcoate HD Sails Scorpion Tuning Guide Tom Jeffcoate Tuning Steps Introduction Setting up your rig Spreader settings Rig upright & rig tension Pre-Bend Adjust as required Repeat Intermediate settings as required

More information

FASTENERS, CLAMPS & STRAPS

FASTENERS, CLAMPS & STRAPS Bands...169 Buckles...170 Cable Ties...171 Clip, Ring & Pin Kits...168 Clips, Rings & Pins...168 Hose Clamps...170,171 Screw Anchor Expanders...168 Strap Tensioners & Adaptors...172 Tie Wire...172 Tie

More information

HADRON H2 CLASS RULES

HADRON H2 CLASS RULES HADRON H2 CLASS RULES 2018 The Hadron H2 was designed in 2015 by Keith Callaghan and is manufactured under licence by Hadron Dinghies Ltd. INDEX PART I ADMINISTRATION Section A General A.1 Language...

More information

AUSTRALIAN COBRA CATAMARAN ASSOCIATION RULES AND RESTRICTIONS IMPOSED ON COBRA 5 METRE CATAMARANS AS AMENDED TO JANUARY 1996

AUSTRALIAN COBRA CATAMARAN ASSOCIATION RULES AND RESTRICTIONS IMPOSED ON COBRA 5 METRE CATAMARANS AS AMENDED TO JANUARY 1996 AUSTRALIAN COBRA CATAMARAN ASSOCIATION RULES AND RESTRICTIONS IMPOSED ON COBRA 5 METRE CATAMARANS AS AMENDED TO JANUARY 1996 General Revision 1.2 - November 1997 1. By agreement with the designer of the

More information

Melges 32 59,950. Dimensions Length: 32' Beam: 3' Min Draft: 2.11' Displacement: 1769 kgs. Builder/Designer Year: 2005

Melges 32 59,950. Dimensions Length: 32' Beam: 3' Min Draft: 2.11' Displacement: 1769 kgs. Builder/Designer Year: 2005 Melges 32 59,950 Builder/Designer Year: 2005 Builder: Soca Sailboats Designer: Reichel/Pugh Construction: Composite Dimensions Length: 32' Beam: 3' Min Draft: 2.11' Displacement: 1769 kgs Engine Make:

More information

Installation Instructions - Steel 4 Spring Arm Kits , , , ,

Installation Instructions - Steel 4 Spring Arm Kits , , , , Installation Instructions - Steel Spring Arm Kits 50-0709, 50-079, 50-0750, 50-075, 50-078 GR 8// 07-00 0 N. Marshall Ave. El Cajon CA. 900 For technical support call us at (800) 8-075 Step. Determining

More information

Below are the instructions to build a roller-furling unit for under $10. Read the entire process before beginning the project.

Below are the instructions to build a roller-furling unit for under $10. Read the entire process before beginning the project. Greg Cowens' $10 PVC Roller Reefing for CP-16's by Greg Cowen Below are the instructions to build a roller-furling unit for under $10. Read the entire process before beginning the project. Materials: 2

More information

MANUAL REEFING SYSTEMS

MANUAL REEFING SYSTEMS MANUAL REEFING SYSTEMS Reliability > Performance > Robustness PROFURL offers a comprehensive range of manual headsail furlers. With its Cruising and Racing models, PROFURL is able to match the expectations

More information

Price List January SECUROPE Life Line

Price List January SECUROPE Life Line 4, rue des Etangs L-7303 Steinsel email :marketing@fallprotec.com Fax : +352 26 36 08 41 Tel : +352 26 55 09 30 Price List January 2009 SECUROPE Life Line Code N Quantity for 1 system Designation Unit

More information

M32 CATAMARAN ASSEMBLY MANUAL

M32 CATAMARAN ASSEMBLY MANUAL M32 CATAMARAN ASSEMBLY MANUAL 1 M32 CATAMARAN ASSEMBLY MANUAL MANUAL SUMMARY M32 ASSEMBLY Parts and tools Instructions MAST PLATFORM Parts and tools Instructions MAST STEPPING Instructions MAIN HALYARD

More information

THOR 10 HAMMER CAGE INSTRUCTIONS

THOR 10 HAMMER CAGE INSTRUCTIONS 75 " 7m 78 4" m 6" 8.8m 45 ".70m 4.9deg 6 4" 6m 44 4".67m 75 " 7m 9 4" 0m 44".m 497 4".64m The 70, Thor Hammer Cage, consists of four heavy duty aluminum net poles. The unique pole structure reduces the

More information

Holt Contents. Holt Blocks. Holt Cleats. Holt Spars & Rigging. Holt Deck Hardware. olt Accessories

Holt Contents. Holt Blocks. Holt Cleats. Holt Spars & Rigging. Holt Deck Hardware. olt Accessories Master.qxd 0/03/2004 2.34 Pagina Holt Contents Holt Blocks 4 - Dynamic bearing system 4 20mm dynamic blocks 30mm dynamic blocks 6 Snatch blocks 7 40mm blocks 7 High tension blocks 8 AUTORATCHET 9 Sheaves

More information

Mainz Product Catalogue

Mainz Product Catalogue 2019 Mainz Product Catalogue Stainless steel wire, fittings, hardware and tools for wire balustrades Stainless steel wire Stainless steel hardware and fittings Tools Mainz Pty Ltd Ph: (08) 92756246 www.wirebalustrades.com.au

More information

Rules of the Association Miracle Association Rules of Measurement and Construction MIRACLE DINGHY RULES OF MEASUREMENT AND CONSTRUCTION

Rules of the Association Miracle Association Rules of Measurement and Construction MIRACLE DINGHY RULES OF MEASUREMENT AND CONSTRUCTION MIRACLE DINGHY RULES OF MEASUREMENT AND CONSTRUCTION 2018 1. GENERAL [a] This is a One Design Class and the object of these rules is to ensure that in exterior Hull form, hull weight, Sail plan and Spars,

More information

North Sails Seattle Thunderbird Tuning Guide

North Sails Seattle Thunderbird Tuning Guide Page 1 of 6 North Sails Seattle Thunderbird Tuning Guide Introduction The following tuning guide is meant as a good starting point in setting up your boat. Since not all Thunderbirds are exactly alike

More information