[ ] 10 YEAR HULL WARRANTY [ ] GEL COAT: [ ] RESIN: [ ] FIBERGLASS [ ] VACUUM BAGGING:

Size: px

Start display at page:

Download "[ ] 10 YEAR HULL WARRANTY [ ] GEL COAT: [ ] RESIN: [ ] FIBERGLASS [ ] VACUUM BAGGING:"

Daniel Stanley
5 years ago
Views:

1 Progression 22 This list is provided to help you to evaluate the many advantages that come STANDARD with a PROGRESSION 22. As you compare Progression s many superior features to the competition, it will become apparent that Progression builds a boat unlike any other in the world. Construction [ ] 10 YEAR HULL WARRANTY. [ ] GEL COAT: 3 color, your choice. [ ] RESIN: AME [ ] FIBERGLASS BI & TRI Directional. [ ] VACUUM BAGGING: All hand lay up and vacuum-bagged all structural laminates. [ ] BALTEK DECOLITE FIBERGLASS COMPOSITE PANELS used instead of plywood. [ ] RUBRAIL 100% THRU-BOLTED: deck and hull joined together with bi-directional glass. Hardware [ ] TOW EYES: (QTY.3) two located at stern and one at bow. [ ] CLEATS: (QTY.5) -pull up one located at the bow, 2 located at the stern, port and starboard side, and 2 located even with dash on port and starboard side. [ ] ROPE CHOCKS: (QTY.2) stainless steel, located port and starboard side of bow cleat. [ ] RUB RAIL is made of stainless steel, 1 1/4" wide and it's 100% through bolted. [ ] DRAIN PLUG. [ ] FUEL TANK: 58 gal. for a single engine installation. [ ] FUEL LINE: Coast Guard approved. [ ] FUEL FILL is a 2-inch screw top, stainless steel gas fill, mounted on starboard side. [ ] CLAMPS for fuel fill line, (4) T-bolt stainless steel clamps. [ ] FUEL VENT is made of stainless steel and protected with a shield, mounted on the starboard side. [ ] DECALS: (QTY.2) Progression logo, located on port and starboard side at transom. [ ] VINYL LETTERS: (QTY.2) Progression, located port and starboard on wind screen. Cockpit [ ] LENGTH of outboard cockpit is 80 inches. [ ] COCKPIT HEIGHT: average, 24 inches. [ ] SEATS SIX ADULTS. [ ] BOLSTER BUCKETS: (QTY.2) state of the art sit-downs with 5.5 inches of multi density mattress foam. [ ] SEAT SLIDES are for front to back adjustability for each front bucket seat. [ ] REAR BENCH seats four adults and are equipped with grab handles. [ ] UPHOLSTERY: you have the choice of any 3 colors of the many we offer. [ ] CARPET is throughout the entire cockpit, and you have a choice of any two colors of the many that we have to offer. [ ] SKI LOCKER is located in the center of floor and comes with a lockable cover. [ ] HANDLE is located on the dashboard, port side. [ ] COCKPIT COVER with pole vent. Pg. 01

Straight Dashboard [ ] DASHBOARD runs straight across from port to starboard. Progression 22 [ ] HANDLE is made of 1-inch stainless steel and is located on the dashboard, port side.

2 Straight Dashboard [ ] DASHBOARD runs straight across from port to starboard. Progression 22 [ ] HANDLE is made of 1-inch stainless steel and is located on the dashboard, port side. [ ] FLOOR LOCKER is located in the center of the floor. It starts at the dash and runs forward. It comes with a lockable cover. [ ] CABIN LENGTH 109 from dash to bow bulkhead. Crawl up cuddy is standard [ ] CABIN HEIGHT is approximately 26 inches (average). [ ] HEADLINER throughout the cabin is made of a plush light colored fabric. [ ] BOW LOCKER has a carpeted cover with snaps. [ ] CARPET used for the floor and wall covering throughout the entire cabin. (2 colors). Engine trim toe switches (optional). Electrical [ ] BOW LIGHT is made of stainless steel and is mounted on the deck (bow). [ ] STERN LIGHT is mounted at the starboard stern and the pole is completely removable. [ ] FUSE PANEL is a ATC/ATO 12 circuit plug in, with a ground bar. [ ] DASH SWITCH PANEL (QTY.1) has 5 waterproof switches with LED indicators. [ ] BILGE PUMP Lovett 1200 GPH, works with automatic and manual operation. [ ] BATTERY BOX is made of stainless steel and thru bolted through the floor. [ ] ELECTRICAL TUBING runs from bow to stern and is mounted every 12 inches, to protect against the wiring from getting chafed. Pg. 02

Progression 22 Single Outboard Rigging [ ] STEERING WHEEL custom aluminum with

[ ] ALUMINUM TRANSOM PLATE 1/4 6061-T6 mounted on the inside of transom.

the electrical and control cables that accommodates 2-inch hose.

3 Progression 22 Single Outboard Rigging [ ] STEERING WHEEL custom aluminum with vinyl grip. [ ] ALUMINUM TRANSOM PLATE 1/ T6 mounted on the inside of transom. [ ] RIGGING EXIT FITTING is a stainless steel fitting that is custom made for the electrical and control cables that accommodates 2-inch hose. [ ] DUAL RIDE GUIDE STEERING includes Mercury dual rack cable system out to the back of the boat. [ ] ENGINE BRACKET is made of aluminum and adjustable up and down. Pg. 03

4 Pg. 04

5 Pg. 05

6 Pg. 06

7 Pg. 07

8 Pg. 08

9 Pg. 09

10 Pg. 10

11 Pg. 11

Progression 24LD Stern Drive

Progression 24LD Stern Drive This list is provided to help you to evaluate the many advantages that come STANDARD with a PROGRESSION 24LD. As you compare Progression s many superior features to the competition,