AzureProject DESIGN FIBRE LAYOUT PERFORMANCE OPTIMISATION MAIN BENEFITS. The innovative, fully integrated sail design and optimisation system
|
|
|
- Victor Tyler
- 5 years ago
- Views:
Transcription
1 AzureProject The innovative, fully integrated sail design and optimisation system DESIGN» any type of sail*» add any manufacturing details FIBRE LAYOUT» flexible fibre layout tools PERFORMANCE OPTIMISATION» design fast sails» optimise trimming conditions * Gaff and Dhow sails require the Gaff Sails add-on MAIN BENEFITS» design fast sails» highly accurate and reliable results» maximize manufacturing productivity
2 Design» All AzureProject packages include a comprehensive set of versatile tools to create any kind of sail. ADVANCED TOOLS DESIGN» Any type of sail, by working accurately on:» sail section geometry.» luff, leech and foot.» add battens and control roach.» The hull shape, or import it from a Rhino file.» The rig, with all the elements.» Create your own measurement rules, ensuring that sails fit class rules.» Evaluate how the sail shape changes with:» Mast bend.» Foot camber. MANUFACTURING» Create any type of panel layout, including mitre cut.» Any type of patches (stack, radial, double ply).» UV Covers.» Panels and patches are saved as ntv or dxf files, compatible with all manufacturing systems.» In AzureProject, you can render the entire sailplan in 3D, including all manufacturing details.
3 Fibre Layout» The fibre layout tools enable the design of fibre laminate sails which can be produced on any available lamination system. CREATE» Layout fibre groups directly on the 3D surfaces OR on the 2D, flat panels.» Set different fibre array configurations.» Use graphical tools for shaping fibre groups.» Control fibre density. VISUALISE» Each, or many, fibre groups.» Panels, with all the fibers.» The final texture, accounting for fibre thickness.
4 Performance Optimisation» It is always a challenge to develop the best possible sail shape for an even set of dimensions and conditions. With comprehensive simulation and analysis features, AzureProject calculates the flying sail shape and performance of your design. FLOW FLEX RESULTS INPUT» AWS / AWA» TWS / TWA / BS» Sheeting angle» Heeling angle» Drive & side force coefficients» Lift & drag force coefficients» Pressure distribution & coefficient» Sailcloth» Trimming conditions» Flying sail-shape» Stresses, strains and corner loads ADVANCED ANALYSIS With the Advanced Analysis Module, you can also account for:» sail trimming and corner loads.» forestay tension and sag.» orthotropic material properties.
5 Add-ons AzureAgent App» The app allows you to capture rig data on any tablet, and have the AzureProject rig file created automatically. Gaff Sails» The unique design program for creating low and high aspect ratio gaff sails and dhow sails. AzureVision» AzureVision is a 3D visualisation tool that allows you to share your designs with your customers, improving and simplifying communication. Img2Des» Capture the flying sail shape geometry from a photo, and create the AzureProject design file directly from it. MultiRig» Create the full rig model for all yachts with multiple masts.
6 Testimonials FRANCESCO CRUCIANI, TRE EFFE ELLE, ITALY We design fast, light and robust sails. This would not have been possible without the analysis tools provided with AzureProject. CHRIS OWEN, SAILTRIMCOACH, UK AzureProject has the right tools to help me in designing a fast sail-shape and selecting the right sailcloth. MARTON BALAZS, ONE DESIGN SAILS, HUNGARY A big hug to SMAR Azure Ltd for feeding us with the best design software and add-ons. CHARLES-EDOUARD BROC, INDEPENDENT SAIL DESIGNER AzureProject is very powerful and accurate. It helps me improve sail shapes, as well as compare different versions of a sail. SOME OF OUR CUSTOMERS INCLUDE: SMAR AZURE LTD Hill Street Edinburgh, EH2 3JZ, UK +44 (0) info@smar-azure.com» Market leader in design and analytical software for the marine industry.» Used by over 200 users in 30 countries.» Lloyd s Register and RINA use RigEdge for certifying sailing yacht rigs.» Team is formed of highly experienced engineers in sail design, rig design as well as software development.
Downwind Aero Moments & Forces
Downwind Aero Moments & Forces Fluid-Structure-Interaction (FSI) modeling of Downwind Sails Phase 2 Prepared for: SYRF November 2016! 1 !2 Contents List of Terms... 4 Executive Summary... 5 1. Project
ETCHELLS RIG SET UP FOR PC-M/PC+/BF MAIN, DC270/GM JIBS,.5oz VMG, FULL RADIAL and.5oz/.75oz BIRADIAL SPINNAKERS
ETCHELLS RIG SET UP FOR PC-M/PC+/BF MAIN, DC270/GM JIBS,.5oz VMG, FULL RADIAL and.5oz/.75oz BIRADIAL SPINNAKERS 1. MAST STEP Jan 2008 5.360mtrs measured from the transom/deck intersection to the aft edge
RS:RACING EVOV - The Performance Leader. Sizes Luff Boom/cm Base Battens Cams Ideal Mast Top Finishing Code
RS:RACING EVOV - The Performance Leader Year after year, the NeilPryde RS:Racing sail is the sail by which all others are measured the true global benchmark of racing performance. The latest version of
Full Batten 2 Systems
Full Batten 2 Systems A range of fully integrated batten systems Almost all boats benefit from upgrading to a fully battened mainsail, but which benefits are most important to you, depends upon the type
Monday, May 18, 2015 Not for Sailors Only: Sailmaking--Think High-Tech, Stateof-the-Art
Monday, May 18, 2015 Not for Sailors Only: Sailmaking--Think High-Tech, Stateof-the-Art If you think sailmaking is a craft reserved for wizened old sea dogs with needles and palm-protectors, you're in
The USA Canterbury J. Class Rules
Canterbury J Class Owners Association The USA Canterbury J Class Rules 2010 As Accepted 2008 and Revised February 2010 Published March 2010 The Canterbury J Class Rules ~ 2008 Page 1 of 10 THE CANTERBURY
Setup &Tuning guide. Updated 1st February 07
Setup &Tuning guide Updated 1st February 07 Boat preparation Tape a piece of batten to the backstay ram with a calibrated scale drawn on it. This will allow you to reproduce the same backstay settings
AMYA Soling 50 Class Rules
AMYA Soling 50 Class Rules - 2009 Overall General Specifications Length = 50 Overall Beam = 12 1/8 Overall Draft = 11 Sail Area = 800 Square Inches Displacement = 17 lbs. Minimum Mast Height = 61-1/4 Maximum
CR 914 Class Rules. Revised July 15, 2000 See also CR-914 Class Rule Interpretations
CR 914 Class Rules Revised July 15, 2000 See also CR-914 Class Rule Interpretations 1 GENERAL - CLASS: The CR 914 is a One-Design class. The Class objective is that the sailing skills of the skipper shall
Neil Pryde Sails International Design and Technical Office. Classic Sails
2006 Neil Pryde Sails International Design and Technical Office Classic Sails INTERNATIONAL DESIGN AND TECHNICAL OFFICE Classic Sails Overview Contact: All material herein is protected by applicable copyright
Section III Principles of design and aerodynamics
Section III Principles of design and aerodynamics 1 Principles of the Tasar rig a) Evolution The most significant advance in recent decades in the art of handling sailboats has been the use of tufts and
Cambria s new sails were made in 2 ply constructions using Contender Low Aspect 6.46, 7.46 and 8.46 oz. Patricia Lascabannes
Cambria s new sails were made in 2 ply constructions using Contender Low Aspect 6.46, 7.46 and 8.46 oz. Patricia Lascabannes Why Should You Insist On Contender Woven Sailcloth? Contender is committed to
SALES BULLETIN. Edition 47, October 2012
SALES BULLETIN Edition 47, October 2012 RS:RACING EVOV - The Performance Leader Year after year, the NeilPryde RS:Racing sail is the sail by which all others are measured, the true global benchmark of
PRESS PACK n. 1 January 2010
PRESS PACK n. 1 January 2010 The KIWI 40FC the birth of an iconic yacht In 2004 the first of a new breed of 40 foot yachts was launched in France. Fast and capable offshore, it could be raced hard or cruised
HIGHLIGHTS. Quadruple Luff Panel Layout. Component Sleeve Construction
The all-new EVO6 is the latest speed machine borne from the record-breaking RS:Racing programme. Brilliantly bright new livery is apparent but something more extraordinary hides beneath completely new
IOM RIGS AND SAILS CERTIFICATION CONTROL - CHECK LIST FORM 2017
INTERNATIONAL ONE METRE CLASS 2017 RIGS AND SAILS CERTIFICATION CONTROL - CHECK LIST FORM RIGS AND SAILS CONTROLLED 1 2 3 (circle, or cross out as appropriate) Hull Registration Number... Certification
AUSTRALIAN ARROW AND ARAFURA CADET ASSOCIATION ARROW CATAMARAN RESTRICTIONS AND MEASUREMENT CERTIFICATE
AUSTRALIAN ARROW AND ARAFURA CADET ASSOCIATION ARROW CATAMARAN RESTRICTIONS AND MEASUREMENT CERTIFICATE 1 NOTE: The object of these restrictions is to provide uniform specifications and restrictions for
Neil Pryde Sails International Design and Technical Office. O Day Sailboats Sails Overview
2002 Neil Pryde Sails International Design and Technical Office O Day Sailboats Sails Overview INTERNATIONAL DESIGN AND TECHNICAL OFFICE Product Overview Contact: Neil Pryde Sails Int. 354 Woodmont Road
FREE MOTION SIMULATION OF A SAILING YACHT IN UP-WIND CONDITION WITH ROUGH SEA
STAR European Conference 2010 London, 22-23 March FREE MOTION SIMULATION OF A SAILING YACHT IN UP-WIND CONDITION WITH ROUGH SEA G. Lombardi, M. Maganzi, A. Mariotti Dept. of Aerospace Engineering of Pisa
WE COULD USE AN INSPIRATIONAL VISUAL METAPHOR THAT GRABS YOUR ATTENTION...THINK BIRDS WING...OR...TABLET OF VIAGRA.
THE USUAL CLICHÉS... WE COULD USE AN INSPIRATIONAL VISUAL METAPHOR THAT GRABS YOUR ATTENTION......THINK BIRDS WING...OR...TABLET OF VIAGRA. WE COULD WOW YOU WITH STATS AND SNAPPY ABBREVIATIONS OR...WE
2018 RS:RACING SAIL - RACING PROGRAM. Antoine Albeau
2018 RS:RACING SAIL - RACING PROGRAM Antoine Albeau 40 WINDSURFING Racing Program We only play to win Over 30 years of domination in slalom and speed events didn t come easily. It came from the hands and
Martin 242 Tuning Guide
Martin 242 Tuning Guide The Martin 242 The Martin is a relatively easy boat to sail and the fleet has taken steps to make the boats as even as possible. This tuning guide was written as a reference to
The ends. I x. Wall thickness mm B087 87/ B /
Aluminium booms Seldén booms have a wealth of sophisticated features and can be equipped with a variety of reefing systems and outhaul systems to suit the needs of different sailors. The ends The inboard
Sail Trimming Guide for the Beneteau 373
INTERNATIONAL DESIGN AND TECHNICAL OFFICE Sail Trimming Guide for the Beneteau 373 March 2004 Neil Pryde Sails International 354 Woodmont Road #18 Milford, CT 06460 Phone: 203-874-6984 Fax: 203-877-7014
CONTROL SETUP WASZP Team 11/29/2016
CONTROL SETUP WASZP Team 11/29/2016 INTRO This guide will help you tune your WASZP for optimised stability and performance. It will run through a good base setting for the systems that control your flight,
HADRON H2 CLASS RULES
HADRON H2 CLASS RULES 2018 The Hadron H2 was designed in 2015 by Keith Callaghan and is manufactured under licence by Hadron Dinghies Ltd. INDEX PART I ADMINISTRATION Section A General A.1 Language...
Performance Cruising
Performance Cruising Performance Our definition of Performance portrays your total experience in dealing with Neil Pryde Sails. Every Neil Pryde sail is the result of a combination of craftsmanship, technology
The M242 is a relatively easy boat to sail and the fleet has taken steps to make the boats as even as possible.
Tuning Guide October 2005 Dear M242 Sailors, The M242 is a relatively easy boat to sail and the fleet has taken steps to make the boats as even as possible. This tuning guide was written as a reference
SOLUTIONS FOR TODAY S SAILORS J/88
SOLUTIONS FOR TODAY S SAILORS J/88 Tuning Guide Contents Initial Headstay Set-up... 3 Onboard Headstay Adjustment... 5 J/88 Tuning Guide... 7 Sailing Setup... 8 North Sails Tips for J/88... 9 Jib Leech
INTERNATIONAL FLYING FIFTEEN CLASS MEASUREMENT FORM
INTERNATIONAL FLYING FIFTEEN CLASS MEASUREMENT FORM 2014 Authority: * International Sailing Federation, Ariadne House, Town Quay, Southampton, Hampshire, SO14 2AQ, UK IN ORDER TO OBTAIN A MEASUREMENT CERTIFICATE
ISAF In-House Certification
ISAF In-House Certification IOM Sail Training Syllabus The ISAF has developed 3 IOM training syllabus and courses as follows:- Sail Rig Hull and Appendage This paper details the syllabus for Sail training
MAXIMUM SAIL POWER CHAPTER 7 MAINSAIL DETAILS FOR THE CRUISING SAILOR
MAXIMUM SAIL POWER CHAPTER 7 THE DEVIL IS IN THE DETAILS - Part 2 MAINSAIL DETAILS FOR THE CRUISING SAILOR It used to be simple. In the old days your sailmaker offered you one kind of mainsail and sailors
Viper 640 Tuning Guide
Viper 640 Tuning Guide For any question you may have on tuning your Viper 640 for speed, contact our experts: Ched Proctor 203-877-7627 ched.proctor@northsails.com Zeke Horowitz 203-783-4241 zeke.horowitz@northsails.com
Unlimited performance. Proctor carbon spars
Unlimited performance Proctor carbon spars Attention to detail The new Proctor carbon spars are now being used on the Musto Skiff. And they are all set to create more than a stir in Open Class boats like
THE 21 st CHESAPEAKE SAILING YACHT SYMPOSIUM ANNAPOLIS, MARYLAND, MARCH 2013
THE 21 st CHESAPEAKE SAILING YACHT SYMPOSIUM ANNAPOLIS, MARYLAND, MARCH 2013 An experimental validation case for fluid-structure-interaction simulations of downwind sails Hannes Renzsch, University of
Agenda. How a sailboat works What are you looking at? Modes of sailing A few boat handling tips Some resources
Agenda How a sailboat works What are you looking at? Modes of sailing A few boat handling tips Some resources The Sail is a Wing Like a wing in principle, lift is generated by both the shape (camber) of
ONCE A BENCHMARK, ALWAYS A BENCHMARK.
RS:RACINGEVOX ONCE A BENCHMARK, ALWAYS A BENCHMARK. RS:Racing a mark that declares the concentrated essence of NeilPryde. Sails with the best technology, speed, power and enhanced specification, designed
APPENDIX IV DEVELOPMENT AND MEASUREMENT RULES OF THE INTERNATIONAL TEN SQUARE METER SAILING CANOE
APPENDIX IV Development Canoe Rules APPENDIX IV DEVELOPMENT AND MEASUREMENT RULES OF THE INTERNATIONAL TEN SQUARE METER SAILING CANOE 1 GENERAL Class and measurement rules measurement forms may be obtained
REAL. Simple, Intuitive, Powerful Real.
REAL Simple, Intuitive, Powerful Real. When we set out to define the bikefitting.com toolset engineered by Shimano Dynamics Lab, these were a few of the stand out priorities we wanted to achieve. We delivered.
EXPERIMENTAL DATABASE OF SAILS PERFORMANCE AND FLYING SHAPES IN UPWIND CONDITIONS
EXPERIMENTAL DATABASE OF SAILS PERFORMANCE AND FLYING SHAPES IN UPWIND CONDITIONS F Fossati, S Muggiasca and F Martina, CIRIVE Wind Tunnel, Politecnico di Milano, Italy SUMMARY Aim of the present paper
Edit this text for your title
Edit this text for your title MEK 4450 Marine Operations Edit this text for your sub-title Presenter name, location, date etc. Kværner ASA / DNV, Fall 2013 Lesson 2/3 Lift phases Load out Transportation
SOLUTIONS FOR TODAY S SAILORS J/111 TUNING GUIDE US ONE DESIGN VERSION
SOLUTIONS FOR TODAY S SAILORS J/111 TUNING GUIDE US ONE DESIGN VERSION Contents Tracking the Rig Tune...3 Calibration...3 Setting Up the Rig...4 Tuning Guide...5 Mainsail Trim Adjustments...6 Headstay
2012 T-BOND MEMBRANE Component Manual
2012 T-BOND MEMBRANE Component Manual Contender U.S. Inc. 54 Front Street Fall River, Ma 02721-4302 U.S.A. www.contendersailcloth.com Telephone: (508) 674-7700 Free: (888) 355-5580 Fax: (508) 674-7766
KUTIN BATTENS in SAILMAKING Inverness, 02. Feb / Ljubljana, 12. Nov. 2014
KUTIN BATTENS in SAILMAKING Inverness, 02. Feb. 2014 / Ljubljana, 12. Nov. 2014 Development of sails is unseparately connected with introduction of new materials for sailing boats, rigs and particularly
WAVE / FREESTYLE SAILS_
WAVE / FREESTYLE SAILS_ DESIGN IDEOLOGY A sail is only as good as the material it s made of. Our panelled sails use the absolute best materials in the industry. Each material we use is custom designed
Tuning Guide January 2012
Tuning Guide January 2012 www.skud.org This tuning guide has been prepared by the IACA SKUD 18 Committee to assist new sailors in the SKUD 18 class to prepare their MkI or MkII boat to a competitive level
E Seldén Sail hardware. OWS sliders and Batten receptacles
597213E 20170606 1 Seldén Sail hardware sliders and Batten receptacles 2 3.5 (Outer Wheel Support) slider Seldén sliders are designed both as batten sliders and webbing sliders. Each model is available
Reefing systems. S-Hooks for slab reef or Cunningham
Reefing systems Traditional slab reef This is a simple and efficient reefing system. The reef cringle on the luff is hooked on to fixed hooks at the inboard end. The leech is reefed down with a line running
Luff and leech hardware
CTP CT22 CT33 CT36 CT40 Luff and leech hardware are designed to be compatible with C-T Sails and other manufacturers products. Receptacles Luff Systems for CT22, CT33 and CT36 battens. Tensioners and End
FREERIDE. Freeride is positioned between the wave and race ranges and benefits directly from their latest developments.
FREERIDE SAILS_ FREERIDE Freeride is not an afterthought. The largest segment of the windsurfing market demands targeted attention to make windsurfing as easy, and as much fun as possible. Freeride is
UPWIND Light wind: <8 knots Sail Setting
UPWIND Since the Laser is a strictly one designed class with very few controls, upwind sailing becomes very physical and technical. Big efforts will only result in little gains in your upwind speed. However,
PERFORMANCE PREDICTION
PERFORMANCE PREDICTION DESIGN #608 BENETEAU FIRST 40 WITH LEAD FIN AND CARBON MAST Farr Yacht Design, Ltd. Copyright (May 3, 2010) PO Box 4964, Annapolis, MD 21403 USA Tel: +1 410 267 0780, Fax: +1 410
The Definite Guide to Optimist Trim
The Definite Guide to Optimist Trim by Martin Gahmberg & the WB-Sails team The purpose of this tuning guide is to help you trim your WB sail optimally by learning the effects of the controls: How to change
HIGHLANDER TUNING GUIDE
HIGHLANDER TUNING GUIDE This document provides information on preparation, Quantum s sail tuning and technique, and other helpful tips to make sure you re ready to meet your challenge in today s competitive
TUNE YOUR SAILS SPEED. Viper 640 Tuning Guide. Rev. R03b
TUNE YOUR SAILS FOR OUTRIGHT SPEED Mast Tuning Tuning Guide for the Carbon Mast SET SPREADER ANGLE Check spreader angle by placing a straightedge or string from shroud to shroud at the spreaders. Measure
Highlander Specifications
Highlander Specifications July 22, 2012 Highlander Specifications The intent of this section is to clarify and add to what is shown in the official plans. In case of conflict between these specifications
INTERNATIONAL ONE METRE CLASS
1 An official measurer shall carry out certification control by checking all items on the boat for compliance with the IOM class rule against the certification control - checklists for Hull & Appendages
TUNE YOUR SAILS FOR OUTRIGHT SPEED. Starling Tuning Guide Solutions for today s sailors
1 TUNE YOUR SAILS FOR OUTRIGHT SPEED 1 The object of the Starling class is for all sails and masts to be identical. We pride ourselves on our ability to reproduce sails identically, so please feel free
MSC Guidelines for Review of Rigging Systems for Sailing Vessels
S. E. HEMANN, CDR, Chief, Hull Division Table of Contents References... 1 Contact Information... 2 Applicability... 2 General Guidance... 2 Methodology... 3 Stability and Rigging System... 3 Hull Structure
Highlander Specifications
Highlander Specifications March 14, 2019 Highlander Specifications The intent of this section is to clarify and add to what is shown in the official plans. In case of conflict between these specifications
100 series aseptic and ultra-clean in-line machines for filling and closing pre-formed containers
100 series aseptic and ultra-clean in-line machines for filling and closing pre-formed containers 100 Series Safe and Reliable ASEPTIC Choice Efficiency Trepko's 100 Series provides tailor made and reliable
Rhodes 19 Tuning Guide
Rhodes 19 Tuning Guide Jud Smith jsmith@doylesails Tomas Hornos tomas@doylesails.com Send order forms to: onedesign@doylesails..com SETTING UP YOUR RHODES 19 FOR DOYLE SAILS BEFORE STEPPING THE MAST 1.
All DIAX fabrics feature the ultimate combination of low stretch, light weight and excellent durability.
the promise All DIAX fabrics feature the ultimate combination of low stretch, light weight and excellent durability. Proven laminating technology: Specially developed adhesives optimise bond strength with
Sail Trimming Guide for the Beneteau 343
INTERNATIONAL DESIGN AND TECHNICAL OFFICE Sail Trimming Guide for the Beneteau 343 June 2006 Neil Pryde Sails International 1681 Barnum Avenue Stratford, CONN 06614 Phone: 203-375-2626 Fax: 203-375-2627
BAY AREA MULTIHULL ASSOCIATION (BAMA) PERFORMANCE HANDICAP RACING FLEET (BAMA.PHRF)
REVISED FEBRUARY 2014 BAY AREA MULTIHULL ASSOCIATION (BAMA) PERFORMANCE HANDICAP RACING FLEET (BAMA.PHRF) PART 1 RULES AND GUIDELINES FOR HANDICAPPING PART 2 Handicap Rating Application http://www.sfbama.org
TUNE YOUR SAILS SPEED. Etchells Tuning Guide. Rev Q04
TUNE YOUR SAILS FOR OUTRIGHT SPEED Congratulation on your purchase of North One Design Etchells sails. The following tuning guide is meant to be a good starting point in setting your Etchells rig and sails.
CII Rigging suggestions
CII Rigging suggestions This mini-manual uses photographs of the final prototype sail and the final pre-production mast. Where changes occurred between these and the production units, they are described
OVERVIEW 2013 FREERIDE RANGE
- FREERIDE OVERVIEW 2013 FREERIDE RANGE RACING RAM F13 PERFORMANCE S_TYPE X_TYPE NATURAL CURVE DRIVE.GROM RACING RAM F13 Maximum performance just below World Cup level with a balanced handling - these
With the new Patrik Formula V2 we are the first brand using WINGS on a production board a new era begins!
With the new Patrik Formula V2 we are the first brand using WINGS on a production board a new era begins! Hiding the concept until the last possible day of registration we now announce the true worlds
Pieter Bijl FLATWATER SAILS
Pieter Bijl FLATWATER SAILS Flatwater sailing is what gets everybody hooked on windsurfing. Most people will remember their first planing experience, and the exhiliration of effortlessly skimming across
PRELIMINARY BAVARIA MATCH 35 INT. CLASS RULES
PRELIMINARY BAVARIA MATCH 35 INT. CLASS RULES 2005 The Bavaria Match 35 was designed in 2003 by J&J Design and was adopted as an international/recognised class in 2005xxxx. INDEX PART I ADMINISTRATION
Optimist Tuning Guide
Optimist Tuning Guide Sail Care: To help you re new racing sail stay in top condition as long as possible here is some tips - Try not to crease your sail, some creases can cause MIT tears in your sail
MANUAL REEFING SYSTEMS
MANUAL REEFING SYSTEMS Reliability > Performance > Robustness PROFURL offers a comprehensive range of manual headsail furlers. With its Cruising and Racing models, PROFURL is able to match the expectations
1 Tuning Platform Reseating Beam Pads Rudder alignment Noisy Foils Rig Tension...
Contents 1 Tuning... 2 1.1 Platform... 2 1.2 Reseating Beam Pads... 2 1.3 Rudder alignment... 3 1.4 Noisy Foils... 3 1.5 Rig Tension... 4 1.6 Mast rake... 4 1.7 Spreader rake... 5 1.8 Diamond tension...
MiniOpti Optimist RC Dinghy CLASS RULES
MiniOpti Optimist RC Dinghy CLASS RULES 1. GENERAL - CLASS The Mini-Optimist as in the full sized Optimist Dinghy class is a One-Design Class. The objective being that the sailing skills of the skipper
Appendix 4. How to draw the patterns for the Jib Panels.
Appendix 4. How to draw the patterns for the Jib Panels. This is an attempt to explain how to draw the patterns to make the jibs of the split junk rig. I suggest you draw a scale drawing on an A4 page
OFFSHORE RACING CONGRESS
World Leader in Rating Technology OFFSHORE RACING CONGRESS ORC Speed Guide Explanation 1. INTRODUCTION The ORC Speed Guide is a custom-calculated manual for improving performance for an individual boat.
ISAF International A Class Catamaran-Measurers Guide
ISAF International A Class Catamaran-Measurers Guide All A Division Catamarans shall have a valid measurement form for sail, mast & hull which are available on the IACA website. These forms are largely
Highlander Specifications (DRAFT UNAPPROVED)
Highlander Specifications March 26, 2014 Highlander Specifications (DRAFT UNAPPROVED) The intent of this section is to clarify and add to what is shown in the official plans. In case of conflict between
CALLIOPE SEA SCOUT GROUP BASIC SAILING MANUAL
The Calliope Sea Scout Group The Ship King Edward Parade DEVONPORT CALLIOPE SEA SCOUT GROUP BASIC SAILING MANUAL This manual has been produced to give all Calliope Sea Scouts a Basic guide to understanding
ADVANCES IN AERODYNAMICS OF WIND TURBINE BLADES
ADVANCES IN AERODYNAMICS OF WIND TURBINE BLADES Herning / October 3 / 2017 By Jesper Madsen Chief Engineer, Aerodynamics & Acoustics WIND ENERGY DENMARK Annual Event 2017 Agenda 1. Aerodynamic design and
Index 1. Trampoline 2. Main Foils 3. Spinnaker Pole 4. Mast Setup 5. Mast Rigging 6. Rig Tension 7. Trapeze Lines 8. Rudders 9. Boom 10. Main Sheet an
By User Manual Index 1. Trampoline 2. Main Foils 3. Spinnaker Pole 4. Mast Setup 5. Mast Rigging 6. Rig Tension 7. Trapeze Lines 8. Rudders 9. Boom 10. Main Sheet and Traveler 11. Main Sail 12. Downhaul
VISIMIX TURBULENT. MECHANICAL CALCULATIONS OF A CONSOLE SHAFT
VISIMIX TURBULENT. MECHANICAL CALCULATIONS OF A CONSOLE SHAFT This example shows how to perform mechanical calculations required to check the shaft reliability, including mechanical strength and vibration
TUNE YOUR SAILS SPEED. Optimist Tuning Guide. Photo Wavelength
TUNE YOUR SAILS FOR OUTRIGHT SPEED Photo Wavelength PEAK / HEAD THROAT TACK CLEW THANK YOU for choosing North Sails for your Optimist. Whether you are just starting out in an Optimist you are an experienced
2016 Range Overview. Summer
2016 Range Overview Summer 15 Windsurfing Sails Fringe - Wave 3 batten FRINGE 3 batten maneuver wave sail SIZE BOOM LUFF MAST adjustable top* RDM 3.0 134 337* 310 or 340 3.3 138 348* 340 3.5 141 357* 340
MAXIMUM SAIL POWER. The Complete Guide to Sails, Sail Technology and Performance. Brian Hancock
MAXIMUM SAIL POWER The Complete Guide to Sails, Sail Technology and Performance Brian Hancock Chapter Four A Primer of Panel Layouts Chapter 4 A PRIMER OF PANEL LAYOUTS Different Layouts for Different
Drawing a detailed sail..the final job before cutting in canvas...
Chapter 4 (..of The Cambered Panel Junk Rig...) Drawing a detailed sail..the final job before cutting in canvas... Introduction Before we are ready to construct a sail (see chapter 5), we need to produce
WB-Sails Europe trimguide. Contents. 0-2 m/s (0-4 kn) WB-Sails Ltd Oy
Contents Europe Trimguide 0-2 m/s Europe Trimguide 3-4 m/s Europe Trimguide 5-6 m/s This trimguide is based on the expertise of Sari Multala, 2001 World champion. We ve divided it into seven wind strengths
Daysailer Tuning Guide
Daysailer Photo Deb McCaffrey For any question you may have on tuning your Daysailer for speed, contact our experts: Brian Hayes 203-783-4238 brian.hayes@northsails.com Chris Snow 619-226-1415 chris.snow@northsails.com
Bluenose Class Jib Trim by: Andreas Josenhans (North Sails Atlantic)
Bluenose Class Jib Trim by: Andreas Josenhans (North Sails Atlantic) The current Bluenose Jib has been unchanged from 2006-2015. Over the years, a Bluenose headsail was changed to achieve the following.
Sonar Tuning Guide. Jud Smith Tomas Hornos Send order forms to:
Sonar Tuning Guide Jud Smith jsmith@doylesails Tomas Hornos tomas@doylesails.com Send order forms to: onedesign@doylesails..com Rig Tune We recommend checking your shroud tuning before going sailing. Start
Welcome to the. National Twelve Owners Association. Dear National 12 sailor
Welcome to the National Twelve Owners Association Dear National 12 sailor Welcome to the National 12 Owners Association. The Association organises many events and activities during the year and I would
1997 Transformer Bump & Jump
1997 Transformer Bump & Jump Rigging & Fine Tuning Guide 1) Roll out the sail, insert the foot batten and tension it. 2) Slide the mast through the luff sleeve (see diagram 1). Note: When rigging with
NORTH SAILS FAST COURSE MAINSAIL
NORTH SAILS FAST COURSE MAINSAIL Contents: Introduction. Step 1 Set twist with mainsheet tension. Step 2 Set depth with mast bend and outhaul tension. Step 3 Set draft position with luff tension. Step
CRUISING CREDIT APPLICATION
PHRF-LE INC. P.O. BOX 770109 CLEVELAND, OHIO 44107 VOICE: 440/933-9917 FAX: 440/933-0090 EMAIL: info@phrf-le.org CRUISING CREDIT APPLICATION I have checked below the cruising credits I wish to take for
AN INVESTIGATION OF AERODYNAMIC FORCE MODELLING FOR IMS RULE USING WIND TUNNEL TECHNIQUES
AN INVESTIGATION OF AERODYNAMIC FORCE MODELLING FOR IMS RULE USING WIND TUNNEL TECHNIQUES Fabio Fossati 1, fabio.fossati@polimi.it Sara Muggiasca 2 Ignazio Maria Viola 3 ABSTRACT Aim of this paper is to
Your new Quantum asymmetrical. is designed and engineered to be. easy to set and trim. Fundamental. principals of asymmetrical trim are
Asymmetrical Trim Guide Your new Quantum asymmetrical is designed and engineered to be easy to set and trim. Fundamental principals of asymmetrical trim are outlined in this guide. For more detailed information,
Your sails perfected
Your sails perfected Racing Sails ail Shape Ltd was formed to take over Mitchell Sails to allow the change of ownership from the previous owner Andy Mitchell to the new director Alan Harris-Guerrero, a
GNX Wind. Owner s Manual
GNX Wind Owner s Manual February 2016 190-02003-00_0A All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves
THE 21 st CHESAPEAKE SAILING YACHT SYMPOSIUM ANNAPOLIS, MARYLAND, MARCH 2013
THE 21 st CHESAPEAKE SAILING YACHT SYMPOSIUM ANNAPOLIS, MARYLAND, MARCH 2013 Mainsail Planform Optimization for IRC 52 Using Fluid Structure Interaction Dr. Robert Ranzenbach, Project Manager, USA Dave