Performance. Smooth Hoisting Increases Work Efficiency. Rated Line Pull (Single Line) SL4500S 132kN{13.5tf} Adjustable HL Mast

Transcription

1

2 Responsibility Builds the Future. Wherever the future is under construction, from largescale plant and energyrelated projects to infrastructure maintenance, you ll find Kobelco s super large size SL6000S and SL4500S crawler cranes in the thick of the action. Ergonomic for maximum comfort. Ecoengineered to be friendlier to our Earth. Kobelco Cranes embody new values. SL6000S Max. Lifting Capacity : STANDARD Max. Boom Length: 108m 1 / Max. Luffing Jib Combination: 60+72m HEAVY LIFT Max. Boom Length: 108m 1 / Max. Luffing Jib Combination: 66+72m SUPER HEAVY LIFT Max. Boom Length: 126m 1 / Max. Luffing Jib Combination: 84+84m 550t SL4500S STANDARD CONFIGURATION Max. Lifting Capacity : 400t LIGHT CONFIGURATION Max. Lifting Capacity : 300t 2 /180t 1. Long Boom 2. With Standard Boom Configuration (width 3.0m boom) The following abbreviations are used through this catalogue. STD: Standard HL: Heavy Lift SHL: Super Heavy Lift 01 STANDARD Max. Boom Length: 96m 1 / Max. Luffing Jib Combination: 66+66m(72+54m) HEAVY LIFT Max. Boom Length: 84m / Max. Luffing Jib Combination: 72+66m(78+54m) SUPER HEAVY LIFT Max. Boom Length: 84m / Max. Luffing Jib Combination: 78+66m(84+54m) Luffing Boom Max. Boom Length: 78m Long Boom Max. Boom Length: 96m Luffing Jib Max. Luffing Jib Combination: 66m+66m The photo is a composite.

3 Performance Toughness and luxury. Incredible manoeuvrability makes work efficiency leap ahead. Lightweight, Solid Upper Frame The upper frame has been newly designed to increase sectional strength and optimise the frame s stress capacity. This enhances rigidity and contributes to the crane s exceptional lifting capacity. Highstrength Lattice Boom, Ready for Hard Work Largediameter main pipe strengthens the boom to significantly boost lifting capabilities. Double Motors for Smooth Travel The crawler has double motors, one in front and one in the rear, delivering steady, powerful traction for smooth onsite travel. Smooth Hoisting Increases Work Efficiency Hoisting speed increases by approximately 30% ensuring faster, more efficient work. Wide, Largecapacity Winches for Smooth Highrise Work The wide hoist winches provide an impressive spooling capacity of 1,080m of 28mm hoist rope. Their large capacity and large diameter prevent uneven spooling and wear while ensuring smooth operation during highrise work with a long boom combination. SL6000S figure. Powerful Line Pull Winch Makes Tough Jobs Easy With the efficient combination of a highoutput engine and high performance hydraulic motors, the winches deliver plenty of line pull for singleline work. There s also ample capacity to get even the heaviest loads off the ground. Rated Line Pull (Single Line) SL6000S, SL4500S Light Configuration 137kN{14.0tf} SL4500S 132kN{13.5tf} Adjustable HL Mast With the adjustable HL mast, the rear swing radius can be set to one of three options to suit work site conditions. This guarantees optimised lifting performance even on small sites. Two options for SL4500S. Spooling Capacity 1,080m HL Spec. Max. Lifting Capacity Heavy Duty Crane Boom: 370t 8.3m SL6000S only. Luffing Jib: SL6000S 200t 14.4m Luffing Jib: SL4500S 113.5t 16.0m 02

4 Transport /Assembly/Disassembly Light and easy. Innovation upon innovation for superior transportability. Transportation Plans Model Transport Weight Transportation Width SL6000S 3,000 mm A,B,C,D, please refer to page 9. SL4500S 2,990 mm SL4500S Light Configuration 63,530 kg A 60,085 kg C 60,085 kg C 44,310 kg B 45,000 kg D 45,000 kg D 2,990 mm Kobelco s Lightweight Upper Frame A new ultrasolid structure and topquality hightensile steel plate enable Kobelco to engineer and build a unique lightweight upper frame. So they re easier to transport than other conventional cranes in their class, not to mention simpler to assemble and disassemble. Easytotransport Swing Cab With plenty of room for the operator, the swing cab has a practical design for easy transportation. The cab swings away and stows in front of the base machine, reducing the transport width of the upper machine to just 3m. New Crawler Frame The crawler frame has the lower rollers fitted inside to increase sectional strength, and uses highgrade, hightensile steel plate to minimise weight. The photo is a composite. Winches Mounted on Mast and Boom The boom hoist winch is mounted on the mast, and the hoist winches are mounted on the boom base. This not only reduces the weight of the base machine, but also saves time labour, and money, because the boom and mast can be transported with winches attached. SL4500S: The boom hoist winch is mounted on the base machine for crane operation and on the mast for transportation. Attachment Transport / Disassembly Streamlined in 6 Big Ways 1 Steel bar pendant NEW The steel bar design is adopted to streamline assembly. It reduces rotation and misalignment during transport. SL6000S only 2 New counterweights NEW A newly designed counterweight allows basketrigging on the proper lifting rug provided outside of the counterweight. It helps reduce rigging time and create stable lift handling when assembling and disassembling the counterweight. 3 Wireless remote assembly controller This standard feature also allows you to start the engine from outside the cab. 4 New reeving winch system Both the main winch and the reeving winch can be operated from inside the cab. Both winches have speedadjusting trimmers that ensure simple, accurate control of winding speed. 5 Boom width: 3.0m Specially designed boom fits in 3.0m width. SL4500S Light Configuration: 2.5m width. 6 Nesting boom NEW The luffing insert jib can be easily nested in the insert boom by using the optional stowing guide rollers. This reduces the number of trailers needed for transport and minimises storage space requirements. 03

5 Versatile Attachment Configurations Boom Base Insert Boom Tapered Boom Heavy Duty Boom Top Luffing Boom Top Luffing Jib Base Luffing Insert Jib Luffing Jib Top Insert Boom (Long) Boom configuration is for illustrative purposes only. STD: Heavy Duty Boom STD: Luffing Boom STD: Long Boom STD: Heavy Fixed Jib STD: Luffing Jib HL: Luffing Jib SHL: Luffing Jib Sharing Booms Reduces Storage and Transportation Costs The boom base and insert boom can both be used in crane boom, long boom, and luffing jib specifications. What s more, the long insert boom with long specifications, long upper boom, and luffing insert jib with luffing jib specifications, and luffing jib top can also be shared. This reduces costs and labour involved in changing specs, in storage, and in transport. Furthermore, as each insert is of the same diameter and thickness of pipe, they can be assembled in any order, and can also be transported. SHL Pallet Reduces Ground Pressure The Super Heavy Lift(SHL) pallet weight is only 1.4kgf/cm 2, reducing the need for ground preparation work. SL4500S Can Be Used as a Light Configuration Crane, Too SL4500S can be operated as a light configuration of the 300t class, which is quite often needed on site. The counterweights can be used as a standard 231t or as 151t light configuration, and the booms are 3.00m wide for the standard and 2.50m for the light configuration. This saves both transport cost and assembly time. Choice of Methods for Assembly/Disassembly of Luffing Jib Jib assembly is possible using either the extended or inside holding methods. On sites where space is available, the extended method is faster, but the inside holding method, in which the jib is folded under the boom, can be used for assembly/disassembly when site space is limited. Enhanced Safety in Boom Assembly/Disassembly The assembly/disassembly mode provided in M/L system enables assembly/disassembly without releasing the overhoist prevention function. When the boom sets above a certain angle, assembly/disassembly is set to safe operation mode automatically. Inside Holding Method Extended Method Selferection System Option Use the builtin, remote controlled translifter (jack system) to lift the SL6000S and SL4500S clear of the trailer, then drive the trailer away. The selfassembly cylinder installed on the mast is used to install the crawler side frames and /or the boom. Quick Connection Device Option and Upper Translifter Option for Assembly to the Base Machine When assembling or disassembling the upper and lower frames of the crane, the hydraulic quick connection device makes the process fast and accurate. In addition, by choosing the optional upper translifter for assembling to the machine, the crane can be assembled without an auxiliary crane. 04

6 Operation/Function/Equipment Smooth and comfortable. Convenience and comfort extend to every corner Roomy interior Conventional models New Cab Design Offers Excellent Operational Efficiency and Superior Interior Comfort. NEW More space inside The cabin maximises comfort in operation and under way. Wide front glass The wide field of view makes for safer, more efficient operation. New M/L monitor One monitor provides a clear image for checking the angles that are difficult to see with the naked eye, improving operational safety. The angle can be adjusted freely for smooth visual checks and receipt of instructions Better Staterecognition The operator can confirm the slant of the crane itself as well as the condition of all attachments. SL6000S only Highquality seat upholstery The seat offers a feel of comfort and quality. Both the lever stand and seat are adjustable for comfort and ergonomics. Fully trimmed interiors The wellappointed interior enhances pride in workmanship Short lever Easilyheld grips fit the hand perfectly. SL6000S and SL4500S offer mobility, as well as instantaneous course changes and swing. Cab entrance width increased from 565mm to 785mm This makes entrance and exit much easier. More foot room The added space reduces fatigue and stress. Overhead glass offering a clear view Tough laminated glass overhead eliminates the need for a roof guard, expanding the operator s field of vision. Cab Tilt Function Makes Highrise Work Easier The cab can be tilted back up to 15 degrees, increasing operator comfort doing highelevation work. Equipped with both wiper and boom. 05

7 Clear Interface Design for Smoother Operations NEW The interface gathers all the important data and operational items into one compact space. The switch and gauge layout takes both operator field of view and hand movement into consideration. Easytounderstand pictograms, a clear M/L monitor, and touchpanel operation add up to major improvements in operating efficiency. Interface panels will differ with model and equipment types. Hook height Wind speed Option Engine speed Easytosee display lamp W1/W2/W3 winch selector Slow speed state Remote control connection Error message Touch to display details in a popup window. Gauges Hydraulic oil temperature Fuel remaining Sediment accumulated Coolant temperature Machine inclination sensor An optional machine inclination sensor offers a visual representation of the current inclination of the crane body. SL6000S only Universally understood pictograms provide intuitive visual recognition. Switches Swing mode (free, high speed) Swing mode (free, low speed) Swing mode (braked, low speed) Camera switches Independent storage Menu Assembly/Disassembly DPR manual operation 06

8 Ecology /Safety Quieter and smoother. Proactive safety and ecological considerations. The photo is a composite. New Base Machine Layout for Easy Maintenance The new layout on the base machine provides more space to access equipment for easier maintenance. Transporting an SL4500S. Dustresistant Slew Bearing with Inside Teeth The standard Kobelco innercut gear swing bearings resist dust penetration and hold grease better than outercut bearings. Multistage System Prevents Boom Slew With primary and secondary overhoist prevention devices, this new safety system can prevent boom overhoist at two stages. The primary stop function is activated when the boom or luffing boom approaches the critical angletoground position during hoisting. This new system monitors the boom, luffing boom or jib angletoground with a sensor, and immediately alerts the operator of any danger. Luffing boom angletomachine is also monitored. The secondary stop function uses a device that monitors the angletomachine of the boom, luffing boom, or jib through a limit switch fitted to the boom and jib backstops. It stops the machine automatically to prevent it from working outside the safety range, and once activated it cannot be cancelled. AngletoMachine AngletoGround 07

9 Environmental Performance Exhaust levels equivalent to those specified under NRMM (Europe) Stage A and /or US EPA Tier 3 regulations Superfine Filter, Longlife Filter for Hydraulic Oil The largecapacity, superfine filter is made of a highperformance filter medium consisting of glass fibre reinforced with steel wires. The replacement cycle is four times longer than that of conventional filters, which reduces lifelong operation costs. Photomicrograph ( 250) Conventional filter (paper fibre) Super fine filter (glass fibre) Better Staterecognition Machine inclination sensor and work area limit value ensure safe operations. SL6000S only Machine inclination sensor Work area limit value Automatic Softstop Function Reducing Shocks The overhoisting prevention device prevents the boom from lowering and the jib from hoisting, and softens automatic stopping when the boom is overloaded and swinging sideways. Highly Acclaimed Safety Devices Industrystandard Automatic Stop Release Switch Instead of a system of separate keys used to override automatic stop functions for overload, hook overhoist, and boom overhoist, SL6000S and SL4500S employ a more reliable twostage system of master key and individual switches. A single master key poses no administrative difficulties, and prevents easy override of the automatic stop. Warning buzzer to alert people in surrounding areas when the crane swings. A oneway call system ensures operator safety. Function lock lever prevents accidental operation. Crawler movement directional markings are clearly visible. External alarms activate when the crane is moving or swinging. Option M/L external display lights inform people in the surrounding area of the crane s load state. Option Rear/main and aux. hoist drum/boom hoist state drum camera and monitor. Option Oneway call Function lock lever 08

10 LINEUP Model LIFT ENHANCER HL Mast Additional Weight HEAVY DUTY CRANE BOOM Max. Lifting Capacity Length LUFFING BOOM Max. Lifting Capacity Length LONG BOOM Max. Lifting Capacity Length HEAVY FIXED JIB Max. Lifting Capacity Boom Length (Min.~Max.) Jib Length (Min.~Max.) LUFFING JIB Max. Lifting Capacity Boom Length (Min.~Max.) Jib Length (Min.~Max.) Luffing Angle HOIST WINCH (H1, H2) Max. Line Speed (1st layer) Rated Line Pull (Single line) Wire Rope Diameter Wire Rope Length WORKING SPEED Swing Speed Travel Speed POWER PLANT Model Rated Engine Output (Max.Engine Output) Fuel Tank HYDRAULIC SYSTEM Main Pumps Max. Pressure Hydraulic Tank Capacity WEIGHT Operating Weight Ground Pressure Counterweight Transportation Weight Note DIMENSIONS Transportation Width Transportation Height Crawler Width Crawler Shoe Width Crawler Length Tail Swing Radius Note: Please refer to specification brochure for other transportation specs. STD 450 t x 6.7 m 24 ~ 84m 300 t x 10.0 m 30 ~ 84 m 98 t x 18.0 m 90 ~ 108 m Type A 105 t x 20.0 m 66 ~ 78 m t x 14 m 30 ~ 60 m 24 ~ 72 m SL6000S HL 30 m 370 t x 8.3 m 36 ~ 84 m 300 t x 9.3 m 36 ~ 84 m 98 t x 20.0 m 90 ~ 108 m Type B1 120 t x 20 m 66 ~ 78 m Type B2 120 t x 20 m 66 ~ 78 m 110 m / min 137 kn {14.0 tf} 28 mm 830 m 0.9 min 1 {0.9 rpm} 1.0 / 0.6 km/h HINO E13CWY 320 kw/2,000 min 1 (330kW/1,800min 1 ) 600 litres 7 variable displacement 32.0 MPa {326 kgf / cm 2 } 710 litres Approx. 444 t kpa 1.5 kgf / cm 2 1 Upper: 200 t Cabody weights: 50 t 63,530 kg A / 44,310 kg B 3,000 mm 3,400 mm / 2,370 mm 9,990 mm 1,500 mm 11,490 mm 8,338 mm SHL 30 m ~ 250 t 550 t x 8.3 m 36 ~ 84 m 300 t x 20.0 m 36 ~ 84 m 98 t x 30.0 m 90 ~ 126 m 200 t x 14.4 m 200 t x 14.4 m 36 ~ 66 m 36 ~ 84 m 24 ~ 72 m 24 ~ 84 m 66 ~ 86 degree Type C 105 t x 30 m 84 ~ 102 m 1: Including base machine, counterweights (200t), carbody weights (50t), 24m STD heavy duty boom and 450t hook block. Not including quick connection STD device and upper translifter. STD 400 t x 5.5 m 24 ~ 78 m t 60 ~ 96 m Type A 90.4 t x 66 ~ 78 m SL4500S HL 30 m 377 t x 7.0 m 30 ~ 84 m Preliminary Type B 88.6 m x 22 m 72 ~ 84 m SHL 30 m ~ 250 t t x 16.0 m t x 16.0 m t x 16.0 m 24 ~ 66 m (72 m) 30~72 m (78 m) 30~78 m (84 m) 24~66 m (54 m) 24~66 m (54 m) 24~66 m (54 m) 66 ~ 86 degree 110 m / min 132 kn {13.5 tf} 28 mm 790 m 1.2 min 1 {1.2rpm} 1.0 / 0.6 km/h Type C 64.9 t x 42 m 90 m x 102 m HINO E13CWY 320kW/2,000min 1 (330 kw/1,800 min 1 ) 600 litres 7 variable displacement 32.0 Mpa {326 kgf / cm 2 } 710 litres Approx. 413 t kpa 1.8 kgf / cm 2 2 Upper: 160 t Lower: 51 t 60,085 kg C / 45,000 kg D 2,990 mm 3,405 mm / 2,545 mm 8,720 mm 1,220 mm 10,515 mm 8,215 mm 2: Including base machine, counterweights (160 t), carbody weights (51t), crawler weight (20t), 24m luffing boom and 400t hook block. Not including quick connection device and upper translifter. Light Configuration SL4500S Light Configuration 377 t x 12.0 m 300 t x 6.0 m 3 / 180 t x 10.0 m 30 ~ 84 m 24 ~ 78m 90 t x 14.0 m 48 ~ 96 m Preliminary 78.3 t x 66 ~ 75 m 80 t x 16.0 m 30 ~ 66 m 24 ~ 66 m 66 ~ 86 degree 110m / min 137kN {14.0 t f } 28 mm H1 720m / H2 280m 1.2 min 1 {1.2rpm} 1.0 / 0.6 km/h HINO E13CWY 320 kw/ 2,000 min 1 (330 kw/1,800 min 1 ) 600 litres 7 variable displacement 32.0 Mpa {326 kgf / cm 2 } 710 litres Approx. 311 t kpa 1.4 kgf / cm 2 4 Upper: 120 t Lower: 31 t 60,085 kg C / 44,590 kg D 2,990 mm 3,405 mm / 2,545 mm 8,720 mm 1,220 mm 10,515 mm 8,215 mm 3: With standard boom configuration (width 3.0m boom). 4: Including base machine, counterweights (120t), carbody weights (31t), 24m luffing boom and 180t hook block. Not including quick connection device and upper translifter. A: Base machine With: upper/lower connecting device, crane mast, mast raising cylinder, carbody, lower translifter. Without: upper translifter, aux. platform, boom foot pin removal cylinder, reeving winch. B: Upper Structure With: upper/lower connecting device (upper), crane mast, mast raising cylinder Without: upper translifter, lower translifter, aux. platform, boom foot pin removal cylinder, reeving winch, carbody. C: Base machine With: crane mast, W1 winch, carbody, lower translifter. Without: upper / lower connecting device. D: Base machine With: crane mast, W1 winch, swing bearing, upper / lower connecting device, upper translifter. Without: aux. platform, reeving winch. 09

11 We walk with you Kobelco Cranes see the same f uture as you do. The photo is a composite. 10

12 Note: This catalogue may contain photographs of machines with specifications, attachments and optional equipment not certified for operation in your country. Please consult KOBELCO for the items you may require. Due to our policy of continual product improvements, all designs and specifications are subject to change without advance notice. Copyright by KOBELCO CRANES CO., LTD. No part of this catalogue may be reproduced in any manner without notice. 171, Higashigotanda 2chome, Shinagawaku,Tokyo JAPAN Tel: Fax: URL: KOBELCO is the corporate mark used by Kobe Steel on a variety of products and in the names of a number of Kobe Steel Group companies. For more information contact: Bulletin No.SL6000S_SL4500S_NR1 NDF Printed in Japan