1996 Sydney 41. Boat Type: Racer and Cruiser Address: San Diego, CA, US Price: $119,000

Transcription

1 1996 Sydney 41 BILL SEMANEK JK3 Yacht Sales 2330 Shelter Island Drive Suite 106 San Diego, CA, US Office: Mobile: Boat Type: Racer and Cruiser Address: San Diego, CA, US Price: $119,000 OVERVIEW The Sydney 41 has cruising comforts wrapped in a high performance package. The 41 should be compared to other yachts such as the Farr 40 and the J 125, especially considering the overall first place finishes around the world. She scored a first overall in the Sydney to Hobart Race first in the Fastnet Race and first in several long distance races around the world. Additionally, the 41 has always scored well in our local Southern and Northern California races. This is not an oversized sport boat. The 41 has a surprisingly comfortable interior featuring 2 cabins, a respectable galley with 2 burner stove & oven, a spacious saloon and one enclosed head. The navigation station is ample and well positioned. This is a cruiser that just happens to sail extremely fast with great control. The masthead rig with large mainsail using a small jib makes handling her much easier than others in her class when in cruising mode. Twister sports a keel designed by Nelson Merek which has enhanced her initial performance.

2 For those looking to race, she has a PHRF rating of 18. SPECIFICATIONS Basic Information Manufacturer: Sydney Vessel Name: Twister Model: 41 Boat Type: Racer and Cruiser Year: 1996 Hull Material: Fiberglass Category: Sail Hull Type: Condition: Used Hull Color: Location: San Diego, CA, US Designer: Ian Murray Available for sale in U.S. waters: No Flag of Registry: US Dimensions & Weight Length: 41 ft meter Draft - max: 9 ft meter LOA: - Bridge Clearance: - Beam: 12 ft 2 in meter Dry Weight: - Engine Make: Yanmar Engine Type: Inboard Model: SD31 Drive Type: Sail Drive Engine(s): 1 Fuel Type: Diesel Hours: - Horsepower: 31 (Individual), 31 (combined) Cruise Speed: - Max Speed: - Range: - Joystick Control: No Tank Capacities Fuel Tank: 24 gallons - 1 tank(s) Holding Tank: - Fresh Water Tank: 52 gallons - 1 tank(s) Accommodations Total Cabins: 2 Crew Cabins: - Total Berths: 5 Crew Berths: - Total Sleeps: - Crew Sleeps: - Total Heads: 1 Crew Heads: - Captains Cabin: - DESCRIPTIONS Dimensions Hull Type: Fin w/bulb & spade rudder Rig Type:Carbon fiber triple spreader masthead sloop with Carbon fiber spinnaker pole repainted in 2013

3 LOA LWL: Beam: Listed S.A. upwind 867 Draft: Custom N.M (approx.) Displacement:13710 Sail Area/Disp1: Designer: Ian Murray Ballast: 5480-Lead Bal./Disp.:38.25% Disp./Len.: Builder: Sydney Yachts (Bashford) Construction: Fiberglass composite Year Built 1996 Auxiliary Power Make Yanmar Diesel SD31 Sail Drive Fuel 24 gals. Fresh Water Tanks: 52 Interior The interior of the Sydney 41 is a huge departure from the traditional sport boat. Her layout is very accommodating for nights aboard whether you are doing a long distance race down the coast, or cruising the islands with the family. The master cabin is located forward with a large double V-berth, hanging locker, and en-suite head. The main salon consists of a Large U-shaped dinette to port with a settee across to starboard. The interior cushions were replaced in 2007 and the dinette table base was replaced with one custom built from teak in Aft of the dinette area is a very functional L-Shaped galley with a dual basin stainless steel sink, LPG Force 10 oven with double burner stove, and large ice box. Directly across from the galley is the navigation station complete with electronics and plenty of storage. The rear section of the boat is configured with additional sleeping accomodations and plenty of storage.the starboard side is a large cabin with double berth and an additional pipe berth for a third person. The port side is a large garage area with two removable pipe berths which is an ideal configuration, adaptable for whatever requirements you have for your voyage. This port side could be converted to a double berth for more crew comfort when cruising. - New cabin cushions LPG stove/oven Force 10 (2 burner) Teak base and Settee table designed and built H&L Marine (2009) - (3) pipe berths, removable for cruising Deck and Hull The very well built hull is a composite construction using Kevlar E-glass biaxial fabric, vinylester and epoxy resins and foam coring of varying thickness. The deck has a PVC core, with laminate and high-density foam supporting the flat areas beneath load-bearing deck fittings. The main structural bulkhead is solid fiberglass and the secondary

4 bulkheads are composite. A fiberglass floor, coupled with the longitudinals, forms a structural grid in the bilge. The molded interior liners, with unidirectional fibers, stiffen the hull and help support the rig load. The high-lift, steel keel section has a lead bulb located more than 8.5 feet below the waterline. The externally fastened keel is attached to the hull with stainless steel bolts and is supported by large, recessed backing plates. The balanced spade rudder is a composite construction around a tubular stainless steel stock. The Cockpit is large, deep, and well set up for racing. All lines are led aft for easy access. The wheel is oversized for excellent control of the helm when seated in any position. The deck housing has a low profile allowing for a clear and open view of all points forward. All comings are curved and provide a great deal of comfort when seated and moving about. The side decks are wide and flat with limited obstructions making for excellent footing for crew when working on deck. - Hull Re-Painted w/ 2 additional coats LP (1/2010) - Thru hull sea cocks all replaced with Forespar Marlon flush hull (2002) - Nelson-Marek Keel upgrade (See photo at haulout) - Lewmar opening ports replaced New S.S. lifelines - Spray on racing bottom paint - Fixed S.S. Stern boarding steps (2008) Electronics -ICOM M504 VHF, with DSC - Furuno WAAS GPS dedicated to B&G display, VHF - B&G System 3000 performance GFD, FFD, 3 20/20 mast, Tru/App Wind analog, - B&G Autopilot w/ Remote - Mechanical Yanmar 3-Cylinder with Sail Drive serviced in 2013 by Pac West - New starter motor and solenoid (2009) - Engine access hatch enlarged for starboard side access in 2005 Rigging - Carbon Mast & pole removed, LPU painted and serviced by Rig Works Antal mast track (removable) - Rod rigging, headstay, backstay (Aramid) replaced by Rig Works Reckman jib roller furling (removable) - Hydraulic backstay piston, thru hull plumbing and cockpit panel serviced New running rigging and life lines replaced by Rig Works 2013

5 -Flex-O-Fold low drag race prop (made in Denmark) Sail Inventory Twister has the following extensive inventory of performance sails: Ullman Carbon mainsail, carbon #1 155, Carbon #2 140, #3 carbon asymmetric spinnakers-1.5 and symmetrical spinnaker 1 code zero by Quantum 1 staysail A listing of many other delivery and cruising sails will be provided. Miscellaneous Items: - North Sails over-the-boom awning and wheel cover (2004) - House and engine starter batteries located at boat center of gravity, at mast base. - Steering Cable replaced (2009) - Repainted Wheel Snow White Awlgrip (2006) -Engine access is good on 3 sides Disclaimer The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. customcontactinformation Call Bill Semanek on cell at or at our San Diego office at address is bill@jk3yachts.com

6 GALLERY LOCATION MAP BILL SEMANEK JK3 Yacht Sales 2330 Shelter Island Drive Suite 106 San Diego, CA, US Office: Mobile: