NAVAL ARCHITECTURE 1. Class Notes

Size: px
Start display at page:

Download "NAVAL ARCHITECTURE 1. Class Notes"

Transcription

1 NAVAL ARCHITECTURE 1 Class Notes d G G 1 W tonnes d G 1 G w tonnes d G 1 G w tonnes Omar bin Yaakob

2 Chapter 1 Introduction Naval Architecture Notes Introduction To carry out various activities at sea, rivers and lakes, man uses various types of marine structures, fixed and floating. The structures must be designed and built in various sizes, shapes and sophistication. Some of them are small and simple such as a canoe or a raft while others are large and complicated such as an aircraft carrier or a semi-submersible oil drilling platform. Naval architecture is an engineering field covering the technology in design of ships and floating structures. The persons having this expertise are called naval architects. To build these structures, shipbuilders requires design plans and guidelines prepared by naval architects. Knowledge in naval architecture is used to carry out design calculation and to produce plans which can be used by the shipyards. Although man has been using marine transport for a long time, not all these vehicles are designed and constructed using naval architecture knowledge. In fact the discipline of knowledge on ship design and naval architecture only appeared in the seventeenth century. Prior to that, shipbuilding is not based on science and technology but rather on the skills of the master craftsmen. This dependence on master craftsmen for shipbuilding can be traced back to the earliest civilization of Egypt, Greek and China. Similarly the war ships and exploration vessels built by the Romans, Muslims as well as the European colonial powers were not built using scientific methods. By the seventeenth century a number of scientists and engineers tried to apply science and mathematical methods in ship design. Among the earliest was sir Anthony Deane who wrote Doctrine of Naval Architecture in Among others, he put forward a method to determine the draught of the ship before it was built. Since then, a number of scientists and engineers continued to study and document various fields of naval architecture. In 1860, a professional body comprising of naval architects was formed under the name Institution of Naval Architects. A hundred years later the name was changed to Royal Institution of Naval Architects. A naval architects works to determine the size and shape of a ship tailored to its intended use. In addition, he estimates its stability, propulsive power as well as calculates the size and strength of its structure and the impact of waves on the vessel. The types of machinery and equipment to be installed, materials to be used and layout of ship are also determined based on naval architectural knowledge. Ship hydrostatics and stability is one of the most important subject in Naval Architecture. The safety of ships, crew, passengers and cargo will be jeopardised if ships are not stable. In this book, readers will be able to appreciate the basic terminologies, carry out simple hydrostatics calculations and will be equipped with basic tools to assess stability of vessels. Omar bin Yaakob, July 008

3 Chapter Ship Types, Basic Terms, Terminologies and Symbols Naval Architecture Notes 1. Types of Ships Ship types can be classed according to: 1. No of Hull a) Monohull/Single hull b) Multi-hull Catamaran Trimaran Quadramaran Pentamaran. Shape of hull form a) Roundbilge b) Chine Single Chine Multiple Chine 3. How the body is supported in water a) Hydrostatic b) Hydrodynamic c) Aeropowered Lift 4. Its function/mission a) Transport Tanker Bulk Carrier Containership Passenger ship General Cargo LNG Carrier b) Navy Aircrft Carrier Submarine Frigate Destroyer Patrol Craft Minesweeper Omar bin Yaakob, July 008 3

4 Naval Architecture Notes c) Work/Service Vessels Tugs Supply boat Crew Boats Heavy Lift Crane ships Fuel Supply Ships Fishing Boat Fire Fighting Boats Rescue Boats d) Leisure Vessels Cruise ships Tourist Boats Water Taxi Boat Houses Omar bin Yaakob, July 008 4

5 . Basic Terms, Terminologies and Symbols Naval Architecture Notes After perpendicular(ap) This is represented by a line which is perpendicular to the intersection of the after edge of the rudder-post with the designed load water-line. This is the case for both single- and twin-screw merchant ships. For some classes of warships, and for merchant ships having no rudder-post, the after perpendicular is taken as the centre-line of the rudder stock. Amidships ( ) This is the point midway between the forward and after perpendiculars. Breadth (B) Bilge BM L This is the maximum beam, or breadth, of the ship measured at amidships. This is the rounded plating at the lower corners between the vertical shell plating and the outer bottom plating. Longitudinal metacentric radius measured from centre of buoyancy BM T Block coefficient (C B) Camber or round of beam Coefficients of form Centre of flotation (F) Centre of buoyancy (B) Centre of gravity (G) Transverse metacentric radius measured from centre of buoyancy This is a measure of the fullness of the form of the ship and is the ratio of the volume of displacement to a given water-line, and the volume of the circumscribing solid of constant rectangular cross-section having the same length, breadth and draught as the ship. ie: C B = (L x B x T) The L PP is normally used in calculating the value of C B which varies with the type of ship. Fast ships (fine form) Ordinary ships (moderate form) Slow ships (full form) This is the transverse curvature given to the decks, and is measured by the difference between the heights of the deck at side and centre. The amount of camber amidships is often one-fiftieth of the beam of the ship. Form is used as a general term to describe the shape of the ship's hull; and when comparing one ship's form with another, the naval architect makes use of a number of coefficients. These coefficients are of great use in power, stability, strength and design calculations. Examples are Cb, Cp, Cw etc. This is the centre of the area, or centroid, of the water-plane of a ship. For small angles of trim consecutive water-lines pass through F. The location is normally on the centerline and longitudinally the distance from AP or amidships is referred to as LCF This is the centroid of the underwater form of a ship, and is the point through which the total force of buoyancy may be assumed to act. Its position is defined by: (a) KB the vertical distance above the base, sometimes referred to as VCB (b) LCB the longitudinal distance measured either from amidships or AP or FP. This is the point through which the total weight of the ship may be assumed to act. It also is defined by: (a) KG the vertical distance above the base (b) LCG the longitudinal distance measured either from amidships or AP or FP Omar bin Yaakob, July 008 5

6 Naval Architecture Notes C P Prismatic coefficient, C P = A M x L Depth (D) This is the vertical distance between the base line and the top of the uppermost continuous deck measured at the side amidships. Draught (T) This is the depth of immersion from the keel to any waterline. Displacement This equals the volume ( ) or weight ( ) of water displaced by the hull. Displacement as a volume ( ) Displacement as a weight ( ) Deadweight Displacement tonnage Entrance and run Forward perpendicular (FP) Freeboard GM L GM T Gross tonnage (GRT) Heel () I L I LCF I T KM L KM T Length between perpendiculars (L PP) Length on the designed load water-line (L WL) This is volume of water displaced by the ship. It can be imagined as the volume of the hole in the water occupied by the ship measured in cubic metres. This is the weight of water displaced by the ship. It equals the volume displaced multiplied by a constant representing the density of water, ie: In fresh water = x 1000 kg/m³ In sea water = x 105 kg/m³ Weight (or mass) displacement equals the total weight of the ship when the ship is at rest in equilibrium in still water. This is the difference between the weight displacement and the lightship weight. This is the measure of a ship's capacity to carry cargo, fuel, passengers, stores, etc, expressed in tonnes. The size of tankers is often given in terms of deadweight tonnage, which is the design deadweight. Ships are usually chartered on the deadweight tonnage. This represents the designed total weight of the ship. It is the sum of lightship weight and deadweight. The size of warshipsand government ships is always given in terms of displacement tonnage. These are the shaped underwater portions of the ship forward and aft of the parallel middle body. This is represented by a line which is perpendicular to the intersection of the designed load water-line with the forward side of the stem. This may be considered to be the height amidships, of the freeboard deck at side above the normal summer load water-line. Longitudinal metacentric height measured from centre of gravity Transverse metacentric height measured from centre of gravity This is a measure of the total volume of enclosed spaces in a ship including the under-deck, 'tween-deck spaces and enclosed spaces above the upper deck. The size of most ordinary merchant ships is quoted in terms of gross tonnage. Although it unit is tons, it must be remembered that it is a measure of volume, not weight. 1 ton = 100 ft3. This is the amount of inclination of the ship in the transverse direction, and is usually measured in degrees. Longitudinal moment of inertia of waterplane about amidship Longitudinal moment of inertia of waterplane about F Transverse moment of inertia of waterplane about centreline Height of longitudinal metacentre above keel line Height of transverse metacentre above keel line This is the horizontal distance between the forward and after perpendiculars. This is the length, as measured on the water-line of the ship when floating in still water in the loaded, or designed, condition. Length overall (L OA) This is the length measured from the extreme point forward to the Omar bin Yaakob, July 008 6

7 Lightship weight extreme point aft. Naval Architecture Notes This equals the weight of an empty ship i.e. a ship without load. It is fully equipped and ready to proceed to sea, but with no crew, passengers, stores, fuel, water, or cargo on board. The boiler or boilers, however, are filled with water to their working level. MCT 1CM Moment to change trim 1 cm, MCT 1CM = GM L BM L = pi L 100 L 100L 100L Midship section This is the transverse section of the ship amidships. Base line Midship section area coefficient(c M) Net or register tonnage Parallel middle body (L P) Prismatic coefficient (C P) Rise of floor Sheer Trim Tumble-home Tonnes per centimetre (TPC) Water-plane area coefficient(c WP) This represents the lowest extremity of the ship. At the point where this line cuts the midship section a horizontal line is drawn, and it is this line which acts as the datum, or base line, for all hydrostatic calculations. Normally, this is the underside of keel. This is the ratio of the immersed area of the midship section to the area of the circumscribing rectangle having a breadth equal to the breadth of the ship and a depth equal to the draught. ie: C M = A M (B x T) C M values range from about 0.85 for fast ships to 0.99 for slow ships. This represents the tonnage of a ship after certain approved deductions, ie nonfreight earning spaces, have been made from gross tonnage. A register ton represents 100 cubic feet of volume. This is the length over which the midship section remains unchanged. This is the ratio of the volume of displacement of the ship to the volume of the circumscribing solid having a constant section equal to the immersed midship section area A M, and a length equal to the L PP i.e. C P = (A M x L) The Cp is a measure of the longitudinal distribution of displacement of the ship, and its value ranges from about 0.55 for fine ships to 0.85 for full ships. This is the amount by which the line of the outer bottom plating amidships rises above the base line, when continued to the moulded breadth lines at each side. This is the curvature given to the decks in the longitudinal direction, and is measured at any point by the difference between the height at side at that point and the height at side amidships. This is the difference between the draughts forward and aft. If the draught forward is greater than the draught aft it is called trim by the head, or bow. If the draught aft is greater, it is called trim by the stern. This is the amount by which the midship section falls in from the halfbreadth line at any particular depth. This is the mass which must be added to, or deducted from, a ship in order to change its mean draught by 1 cm. This is the ratio of the area of the water-plane to the area of the circumscribing rectangle having a length equal to the L PP and a breadth equal to B. ie: C WP = A W (L x B) The range of values is from about 0.70 for a fine ship to 0.90 for a full ship. Omar bin Yaakob, July 008 7

8 Naval Architecture Notes Courtesy Exercise: Visit these websites and get acquainted with more ship terms: utical_term_glossary.htm Omar bin Yaakob, July 008 8

9 Chapter 3 Hydrostatics and Floatation Naval Architecture Notes 3.1 Archimedes Law of Floatation Archimedes (born 87 B.C) Law states that An object immersed in a liquid experience a lift equivalent to the mass of liquid the object displaces. A man immersed in water for example will feel a weight reduction because part of the weight is supported by buoyancy. This buoyancy is equal to the weight of water displaced by his immersed body. 3. Reduction of Weight of Immersed Objects The maximum buoyancy is when the object is fully immersed and this equal the total outside volume of the object multiplied by the density of the fluid. When maximum available buoyancy is less than the weight of the object, the object will sink. That is why an anchor will sink to the bottom. However the object will still feel the weight reduction. Example 3.1: Consider a cuboid having dimensions 1m x 1m x m. If it weighs 3 tonnes in air, what is its apparent weight in water density 1000 kg/m 3? If the object is immersed in liquid, it will displace liquid around it equivalent to its external volume.? tonne In this case, displaced volume = 1 x 1 x = m 3 This is the volume of liquid pushed aside by the cuboid. Archimedes says that the weight of this object in liquid is reduced due to the support given by liquid on the object. The apparent weight equals the weight in air minus the reduction in weight of the object; or the buoyancy i.e. m 3 Buoyancy = volume diplacement x density of liquid = mass displacement = m 3 x 1000 kg/m 3 = 000 kg = tonnes = reduction in weight Omar bin Yaakob, July 008 9

10 Apparent weight = weight in air buoyancy Naval Architecture Notes Since the object weighs 3 tonne in air, it will apparently weigh only 1 tonne in water. Exercise 3.1 Do similar calculations to find out the apparent weight in oil (density 0.85 tonne/m 3 ) and muddy water (density 1.3 tonne/m 3 ) and mercury (density 13,000 kg/m 3 ) Fluid Oil Density ( ) Fluid Support ( ) Apparent Weight ( ) Fresh Water Muddy Water Mercury What can be concluded about relationships between buoyancy of objects and the densities of fluids in which they are immersed? 3.3 What make a Ship Floats? When the maximum available buoyancy is more than the weight of the object, the object will rise to the surface. It will rise to the surface until the weight of the object balances the buoyancy provided by its immersed portions. When the object is floating, its buoyancy is just enough to support its weight. At that point: Total weight W = Buoyancy = Displaced volume x liquid This principle explains why a steel or concrete ship can float. As long as the outer shell of the ship can provide enough volume to displace the surrounding water exceeding the actual weight of the ship, the ship will float. A floating ship is such that the total weight of its hull, machinery and deadweight equals to the weight of water displaced by its outer shell. If, while it is floating weights are added until the total weight exceeds the maximum buoyancy provided by the outer shell of the ship, the ship will sink. 3.4 Effect of Density An object experiences buoyancy force equivalent to the weight of fluid it displaces. For a particular object, the buoyancy force will depend on the density of the fluid, since its volume is constant. This explains for example why a bather will feel more buoyant while swimming at sea compared to in the river or lake. Also, a floating Omar bin Yaakob, July

11 Naval Architecture Notes object of constant weight will sink at a deeper draught in freshwater compared to in seawater. Total weight W = Buoyancy = Displaced volume x liquid Since weight does not change, the buoyancy is also constant. So displaced volume will be inversely proportional to the density of fluid. For floating object, this will determine its level of sinkage or draught. 3.5 Some Simple Problems The fact that a floating object displaces fluid equivalent to its weight can be used to solve a number of problems. Total weight W = Buoyancy = Displaced volume x water From this equation, we can obtain the weight of the object if we know the volume of water displaced. On the other hand, if we know its weight, we can work out its displaced volume. Just to understand the concept, consider a floating box of dimension L x B x D, floating at a draught T. CASE 1: We know its weight, we can find its draught In this case, we know the weight of the object, we can find the displaced volume: Displaced volume = W water i.e. for a box-shaped vessel: Displaced volume = L x B x T Hence draught T of the cuboid can be found. Omar bin Yaakob, July

12 Example 3. Naval Architecture Notes A cuboid shaped wooden block (L x B x D) 1.45m x 0.5m x 0.5m floats in water. If the block weighs tonnes, find its draught if it floats in freshwater density 1.00 tonne/m 3. Solution: The weight of the block of tonnes must be supported by displaced water i.e. the block must displace tonnes of water: In fresh water, Volume of displaced water = L x B x T Weight of displaced water = x FW = 1.45 x 0.5 x T x FW This must equal tonne 1.45 x 0.5 x T x fw = tonnes T = 0.1 m Exercise 3. Do similar calculations for salt water (density 105 kg/m 3 and oil density 0.85 tonne/m 3 ) CASE : If we know its draught, we can know its volume displacement, we can find its weight If we know the draught of the cuboid, we can find its volume displacement and hence the weight of the object; Say if we know its draught T, volume displacement = L x B x T Weight = Buoyancy = Volume Displacement x water Weight = L x B x T x water Example 3.3 A box barge length 100m breadth 0m floats at a draught of 5m in sea water 1.05 tonne/m 3. Find its weight. Solution While floating in sea water density 1.05 tonne/m 3 : Volume Displacement = = L x B x T Weight of barge = Weight displacement, W = = x salt water = 100 x 0 x 5 x 1.05 = 1050 tonnes Omar bin Yaakob, July 008 1

13 Naval Architecture Notes Exercise 3.3 A block of wood length 5m, breadth 0.5m and depth 0.m is floating in seawater at a draught of 0.1m. Find the weight of the block. Exercise 3.4 Find the new draught of the box in example 3.3 when it goes into river, water density tonne/m 3. Also find a new draught if it is in sea water with density tonne/m 3. Exercise m A cylindrical container weighing 5 tonne floats with its axis vertical. If the diameter is 1.0m, find its draught in: i. sea water ii. oil of density 870 kg/ m 3. Exercise 3.6 A cylindrical tank diameter 0.6m and mass 00kg floats with its axis vertical. Find its present draught in oil ( = 0.95 tonne/m 3 ). Find the weight of cargo to be added to ensure it will float at a draught of 0.85m. 3.6 Hydrostatic Particulars A floating object will be at a certain draught depending on the total weight of the object, density of water and the shape of the object. For a ship, the shape of the object has strong influence on the draught of the ship; the shape and draught have to provide enough buoyancy to support the ship. Omar bin Yaakob, July

14 Naval Architecture Notes When a ship is floating at a certain draught, we can find the mass displacement and weight of the ship if we can find its displaced volume. Also we can know its waterplane area, calculate its TPC, KB, C b etc. These particulars which are properties of the immersed part of the ship are called hydrostatic particulars. Examples of hydrostatic particulars are:,, KB, LCB, A w, BM T, BM L, TPC, C B, C P, C M, C W, LCF, MCTC, WSA These particulars describe the characteristics of the underwater portion of ship at a particular draught. It is related to volumes, areas, centroids of volumes and areas and moments of volumes and areas of the immersed portion. If the ship is out of water, and draught becomes zero, the particulars ceased to exist. As long as draught and trim is maintained, the size and shape of the underwater immersed parts of the ship remains the same. The volumes, areas and moments of areas and volumes remain the same. Once draught or trim changes, the particulars will also change. This change in draught will normally occur due to changes in total weight of the ship, or if a force is applied to the ship to make it sink to a deeper draught. Example 3.4 A box m x 1m (LxB) in sea water is floating at a draught of 0.3m. Calculate its,, C B, C WP and TPC. i. = L x B x T = x 1 x 0.3 = 0.6m 3 ii. = L x B x T x = x = 0.6 x 1.05 = tonnes iii. C B = = 0.6 = 1.00 L x B x T 0.6 iv. C WP = A wp = x 1 = 1.00 L x B x 1 v. TPC = A wp x = x 1 x 1.05 = Exercise 3.7 Calculate the particulars at draught of 0.4, 0.5, 0.6 and 0.7m. Exercise 3.8 Find hydrostatic particulars in sea water (,,Awp,LCB, LCF,TPC) of a box barge with dimension L=100m, B=0m, at draughts of 1.0m, 3.0m, 5.0m, 7.0m, 9.0m. If the barge weighs 300 tonne, what is its draught? If the barge is floating at a draught of 4m, what is its C B? Omar bin Yaakob, July

15 Naval Architecture Notes It can be seen from Exercise 3.8 that for a box-shaped object at different draughts, the waterplane areas are constant. Hence, many hydrostatics particulars remain constant. Exercise 3.9: An empty cylindrical shaped tank is floating in sea water (density 1.05 t/m 3 ) at a draught of 8.0 m with its axis vertical. The external diameter of the tank is 1.0 m, internal diameter 11.0 m, thickness of base 1.0 m and the overall height is 16.0 meter. Its centre of gravity is 6 meter above its inner base. Calculate:. i. Find Hydrostatic particulars, Awp, LCB, Cb, Cp, TPC, WSA at T=1,, 4, 6, 8m. ii. Plot hydrostatic curves similar to page 19 showing all data. iii. Final draught of the tank after 500 m 3 diesel oil (density 850 kg/m 3 ) is poured into the tank. The second moment of area of a circle about its diameter is D Hydrostatic Particulars of a Ship Hydrostatic particulars of a real ship will be different. Consider the ship whose lines plan is shown below. At different draughts, the ship will have different waterplane areas, volumes and centroids. Hence, the hydrostatic particularly will vary as the draughts changes. Omar bin Yaakob, July

16 Naval Architecture Notes If areas, volumes, moments, centroids of the waterplanes and sections of the ships can be calculated, hydrostatic particulars of a ship can be obtained. These are calculated at the design stage, once the shape and size of the ship has been decided. Exercise 3.10 A ship with length 100m, breadth m has the following volumes and areas at different waterlines. Calculate its, C B, C W and TPC in saltwater density 1.05tonnes/m 3. Draught (m) Aw (m ) (m 3 ) (tonnes) x ro Cb Cw TPC LBT Aw (LB) Aw x ro 100 The particulars can be presented in two forms, either as a set of curves or in tabular format. Table 3.1 shows a typical table of hydrostatic particulars while an example of hydrostatic curves is shown on page 18. Draught (m) Table 3.1 Hydrostatic Particulars of Bunga Kintan LBP 100m Displacement (tones) Cb KB (m) BMT (m) BML (m) MCTC (tonne-m) LCB (m from ) LCF (m from ) Omar bin Yaakob, July

17 Naval Architecture Notes 3.8 Using Hydrostatic Curves and Tables Hydrostatic curves and tables can be used to obtain all hydrostatic particulars of a ship once the draught or any one of the particulars is known. Example 3.5 From MV Bulker hydrostatic Curves (pg18) at a draught of 7m, we can obtain displacement = 31,000 tonnes, LCF =.0m forward of amidships and MCTC = 465 tonne-m etc. Also if we know the ship weighs 40,000 tonnes, its draught, TPC, MCTC, LCF and LCB can be obtained. Exercise 3.11 Using MV Bulker Hydrostatic Curves, find displacement, LCB, LCF, TPC at draught of 9.5m. If 1500 tonnes is added to the ship, what is its new draught? Hydrostatic tables can be used in a similar manner to obtain hydrostatic particulars once draught is known or to obtain draught and other particulars once the displacement or another particular is known. There is however a need to interpolate the table to obtain intermediate values. HOMEWORK 1: By using the hydrostatic particulars of Bunga Kintan shown in Table 3.1: i. Draw full hydrostatic curves of the ship ii. Find values of displacement, KB, LCB, BM T, BM L, MCTC, C B, LCF of the ship if it is floating at a draught of 6.75m. iii. Find values of T, KB, LCB, BM T, BM L, MCTC, C B, LCF of ship if the ship weighs 11,480 tonnes. iv. When the ship is floating at a draught of 5.5m, 3000 tonne cargo was added. What is its new draught? Submission Date: Exercise 3.11: Calculate,, KB, LCB, A w, TPC, C B, C P, C M, C W, LCF of a cylinder radius 1m floating with axis vertical at draughts of 1.0, 1.5,.0 and.5m. Omar bin Yaakob, July

18 Naval Architecture Notes MV Bulker Hyrostatic Curves Omar bin Yaakob, July

19 4.1 Introduction Chapter 4 Basic Stability Consideration Naval Architecture Notes One of the factor threatening the safety of the ship, cargo and crew is the lost or lack of stability of the vessel. Stability calculation is an important step in the design of the ship and during its operation. While designing the ship, the designers must be able to estimate or calculate to check whether the ship will be stable when constructed and ready to operate. For the ship's master, he must be able to load and stow cargo and handle the ship while ensuring that the ship will be stable and safe. 4. What is stability? Stability is the tendency or ability of the ship to return to upright when displaced from the upright position. A ship with a strong tendency to return to upright is regarded as a stable vessel. On the other hand, a vessel is said to be not stable when it has little or no ability to return to the upright condition. In fact, an unstable ship may require just a small external force or moment to cause it to capsize. Figure 4.1 (a) (b) (c) An analog y for stability is often given of the marble. In Figure 1 (a), the marble in the bowl will return to its original position at the bottom of the bowl is it is moved to the left or the right. This marble is in a condition called positively stable. A slight push on the marble which is put on an upside down bowl as in Figure 1 (b) will cause it to roll off, a condition equivalent to instability. A neutrally stable ship is analogous to a marble put on a flat surface, it will neither return nor roll any further. 4.3 Longitudinal and Transverse Stability Ship initial stability can be seen from two aspects, longitudinally and transversely. From longitudinal viewpoint, the effect of internal and external moments on ship's trim is considered. Important parameters to be calculated are trim and the final draughts at the perpendiculars of the ship. In any state, there is a definite relationship between trim, draughts and the respective locations of the centres of buoyancy and centre of gravity. The trim angle is rarely taken into consideration. Transverse stability calculation considers the ship stability in the port and starboard direction. We are interested in the behaviour of the ship when external statical moment is applied such as due to wind, waves or a fishing net hanging from the side. The effect of internally generated moment such as movement of masses on-board transversely is also studied. An important relationship considered is that Omar bin Yaakob, July

20 Naval Architecture Notes between heeling and righting moments and the resulting angle of heel and its consequence on the safety of the boat. This Chapter will focus on basic transverse stability particularly the relationships between the metacentre and the centre of gravity. 4.4 Basic Initial Stability: The role of GM M T w M T w G W L G w 1 L 1 W B K W K B W B 1 L (a) (b) Figure 4. Consider the ship floats upright in equilibrium as in the above figure 4. (a). The weight of the ship equals its displacement and the centre of buoyancy is directly below the centre of gravity. When the ship is slightly disturbed from upright, the centre of buoyancy being centre of underwater volume moves to the right. The line of action of buoyancy vertically upward crosses the original centreline at the metacentre, M. Since G does not move, a moment is generated to turn the ship back to its original position. This moment is called the returning moment. In this case, M was originally above G and we can see that the returning moment is positive. If M was below G i.e. GM negative, the returning moment will be negative hence the ship is unstable. If M is at G, then the ship is neutrally stable. Righting moment is the real indication of stability i.e. the ability of the ship to return to oppose any capsizing moment and return the ship to upright position. The larger the righting moment, the better stability is. Omar bin Yaakob, July 008 0

21 Naval Architecture Notes Consider the triangle shown below: M T Righting moment = x GZ and GZ = GM T sin G Z For any displacement, righting moment depends on GZ. And GZ depends on GM. The bigger GZ, the bigger Righting Moment. M T Relationships between K, B, G and M T are important. G B KM T = KB + BM T K KM T = KG + GM T For any particular draught or displacement at low angle of heel, keel K and metacentre M are fixed. Therefore the values of KB, BM and hence KM are fixed, as can be obtained from hydrostatic particulars. Therefore the distance GM T will only depend on the height of centre of gravity. In other words, to ensure a large GM T, we can only control KG. 4.5 Determining Centre of Gravity, Areas or Volumes of Composite Bodies The above section has shown that the relative position of M and G are important in determining ship stability. Since M is constant for any particular draught, only G will finally determine the value of GM. Before we go into the details of stability calculations, we have to consider how to determine the location of G. Consider a composite body consisting of two portions shown in Figure 4.3. Area A ca C cb Area B Figure 4.3 xa X xb Omar bin Yaakob, July 008 1

22 Naval Architecture Notes Distance of Centre of Composite to the reference axis: i.e., X = A x xa + B x xb A + B X = Total moment of area about the reference axis Total area If the composite consists of volumes, Centre of Volume X = Total moment of volume about the reference axis Total volume If the composite consists of weights, Centre of Gravity X = Total moment of weight about the reference axis Total weight Example 4.1 Find centre of area (from AP) for an object consisting of four components shown in the figure below. Component Area (m ) Distance from AP (m) TOTAL Moment of Area about AP (m 3 ) Centroid from AP = Total moment of area about AP Total area = m Omar bin Yaakob, July 008

23 Example 4. Naval Architecture Notes A trimaran has three hulls and the respective volume displacements, LCB and KB are shown below. Find the total displacement, LCB and KB. Hull Volume Displacemen t (m 3 ) Lcb (m aft of amidships) Side Main Side Kb (m above keel) Hull Volume Displace ment (m 3 ) lcb (m aft of amidships) Moment about amidships (m 4 ) Side Main Side TOTAL Kb (m above keel) Moment about keel (m 4 ) LCB= Total moment about amidships = 4.56 m aft of amidships Total Volume KB= Total moment about keel =.1 m Total Volume Example 4.3 A stack of weights consists of one 3kg weight and two kg weights. Find centre of gravity of the stack above the floor: Omar bin Yaakob, July 008 3

24 Item Weight (kg) CG above floor (cm) Wt A Wt B Wt C JUMLAH Naval Architecture Notes Moment about Floor (kgcm) Final CG = = cm Example 4.4 A ship has three parts and the respective weights and Kg are as follows. Find the total weight and KG. Part Weight (tonnes) Kg (m above keel) Lightship Cargo Cargo Part Weight (tonnes) Lightshi p Cargo Cargo TOTAL Kg (m above keel) Moment about keel (tonne-m) KG = Total moment about Keel = Total weight m Example 4.5 A ship of 6,000 tonnes displacement has KG = 6 m and KM = 7.33 m. The following cargo is loaded: 1000 tonnes, Kg.5 m 500 tonnes, Kg 3.5 m 750 tonnes, Kg 9.0 m The following cargo is then discharged: 450 tonnes of cargo Kg 0.6 m And 800 tonnes of cargo Kg 3.0 m Find the final GM. Omar bin Yaakob, July 008 4

25 Naval Architecture Notes Item Weight (tonne) Kg Moment about keel (tonne-m) Ship Loaded Cargo1 Cargo Cargo3 Unloaded Cargo Final moment Final KG = Final displacement = Final KG = m Final KM = m Final KG = m Ans. Final GM = m Homework A box-shaped barge is floating in sea water at a draught of 5m. The extreme dimensions of the barge (L x B x D) are 1m x 11m x 10m. The wall and floor are 0.5m thick. Its centre of gravity is 4m above keel. Calculate: i. The displacement and GM T of the empty barge. ii. The barge is to be used to carry mud (density1500 kg/m 3 ). If the draught of the barge cannot exceed 7.5m, find the maximum volume of mud that can be loaded into the barge. iii. For the barge loaded as in (ii), find its GM T. Submission Date: Omar bin Yaakob, July 008 5

26 4.6 Movement of Centre of Areas, Volumes and Weights Naval Architecture Notes When a portion is added or removed from an object, its centre moves. Consider a homogenous object as shown below: i. If weight is moved a distance y: Centre of gravity moved x = GG = m x y M i.e. total moment divided by total weight ii. If weight m is removed: The remaining weight M-m Movement of centre of gravity x = GG = m x d M-m i.e. total moment divided by remaining weight. Example 4.6 A ship weighing 7000 tonnes is floating at the wharf. At that time, KM = 6.5 m and GM 0.5m. Find new GM when a 30 tonnes box is loaded at Kg 10.0m. Assume no change in KM. Method 1: Find rise in KG Original KG = KM - GM = m Distance 30 tonnes box from original G = GG = 30 x 4.0 = 0.017m 7030 KG = KG+ GG = KM does not change, therefore, GM = = m m m M G G B K 10 Omar bin Yaakob, July 008 6

27 Naval Architecture Notes Method : Find final KG using table of moment about keel Portion Mass (m) Kg (m) Moment about keel (tonne-m) Ori. Ship Box Total 7030 KG = Sum of moment Sum of weight KG = m GM = KM - KG KM - KG = m 4.7 Hanging Weights, The Use Of Derricks And Cranes The use of cranes and derricks will make the weights suspended. Suspended weights acts at the point of suspension. Therefore a weight that was initially located on the lower deck for example will instantly be transferred to the point of suspension at the instant the weight is lifted by the derrick. The centre of gravity KG will suddenly increase and since KM is constant, GM will reduce suddenly. If the rise in KG is more than the original GM, the net GM will be negative, leading to instability. Example 4.7 A ship of 7,500 tonnes displacement is upright and has GM 0.0m and KM 6.5 m. A heavy cargo of 100 tonnes already on the lower deck (kg=m) is to be unloaded using the ship s crane. When lifting the cargo crane head is 15 m above keel. What is GM during lifting. Comment of the safety of the operation. Treat as if the weight is suddenly transferred from lower deck to the point of suspension, a distance of 15 meters. The KG will rise, and since KM constant, GM will be reduced. Original KG = KM-GM= = 6.3m Rise in KG = 100 x 13 7,500 =0.173m KG during lifting = KG + Rise = 6.473m GM during lifting = KM- Kgnew = = 0.07m Omar bin Yaakob, July 008 7

28 Naval Architecture Notes 4.8 Free Surface Correction When free surface exists on board the ship, stability of ship is affected. The free surface gives rise to free surface moment which in effect reduce GM. The reduction is called Free Surface Correction (F.S.C). FSC is calculated from the second moment of area of the surface of the fluid; FSC = Free surface moment Ship displacement Free Surface Moment (FSM) = i x ρ fluid Where i the second moment of area of the surface of the fluid and ρ fluid density of the fluid being considered. is the Once the FSC is known, the new reduced GM called GM fluid is obtained GM fluid = GM solid - FSC It is important that free surface be avoided or at least minimised. Note also that KG in ships having free surface is called KG fluid and regarded increased by FSC. KG fluid = KG solid + FSC For tanks with a rectangular surface: Free surface moment = 1 x tank length x tank breadth 3 x density of fluid 1 Free surface correction = 1 x tank length x tank breadth 3 x density of fluid 1 ship displacement EXERCISE 4 1. Bunga Kintan (Hydrostatic data given on page 1) is floating at draught of 6.5m. If its KG is 6.8m, what is its GM?. A ship has a displacement of 1,800 tonnes and KG = 3m. She loads 3,400 tonnes of cargo (KG =.5 m) and 400 tonnes of bunkers (KG = 5.0m). Find the final KG..84m 3. A ship sails with displacement 3,40 tonnes and KG = 3.75 m. During the voyage bunkers were consumed as follows: 66 tonnes (KG = 0.45 m) and 64 tonnes (KG =1 m). Find the KG at the end of the voyage. Omar bin Yaakob, July 008 8

29 Naval Architecture Notes 4. A ship has displacement,000 tonnes and KG = 4m. She loads 1,500 tonnes of cargo (KG = 6m), 3,500 tonnes of cargo (KG = 5m), and 1,50 tonnes of bunkers (KG = 1m). She then discharges,000 tonnes of cargo (KG =.5 m) and consumes 900 tonnes of oil fuel (KG = 0.5 m.) during the voyage. If KM= 5.5m, find the final GM on arrival at the port of destination. 5. A ship arrives in port with displacement 6,000 tonnes and KG 6 m. She then discharges and loads the following quantities: Discharge 150 tonnes of cargo KG 4.5 metres 675 tonnes of cargo KG 3.5 metres 40 tonnes of cargo KG 9.0 metres Load 980 tonnes of cargo KG 4.5 metres 550 tonnes of cargo KG 6.0 metres 700 tonnes of bunkers KG 1.0 metre 70 tonnes of FW KG 1.0 metres During the stay in port 30 tonnes of oil (KG 1 m.) are consumed. If the final KM is 6.8 m., find the GM on departure. 6. A ship of 9,500 tonnes displacement has KM 9.5 m and KG 9.3 m. A load 300 tonnes on the lower deck (Kg 0.6 m) is lifted to the upper deck (Kg 11 m). Find the final GM. 7. A ship of 4,515 tonnes displacement is upright and has KG 5.4 m and KM 5.5 m. It is required to increase GM to 0.5m. A weight of 50 tonnes is to be shifted vertically for this purpose. Find the height through which it must be shifted. 8. A ship of 7,500 tonnes displacement has KG 5.8 m. and GM 0.5 m. A weight of 50 tonnes is added to the ship, location Kg = 11m and 7m from centreline to the starboard side. Find final location of G above keel and from the centreline. What is its new GM? 9. A ship has a displacement of 3,00 tonnes (KG = 3 m. and KM = 5.5 m.). She then loads 5,00 tonnes of cargo (KG = 5. m.). Find how much deck cargo having a KG = 10 m. may now be loaded if the ship is to complete loading with a positive GM of 0.3 metres. 10. A ship of 4,500 tonnes displacement is upright and has KG 5.4 m and KM 5.5 m. It is required to move a weight of 50 tonnes already on the deck (kg=6m) using the ship s derrick. The derrick head is 13 m above keel. Is it safe to do so? 11. A ship of 9,500 tonnes displacement and has KM 9.5 m and KG 9.3 m. The ship has two fuel tanks in double bottoms, rectangular shape each 0 x 5m containing bunker density 900 kg/m 3. Find GM fluid when free surface exists in the tank. 1. Find Gm fluid for the ship in question 11 but with one tank only, length 0m breadth 10m. 13. What happens to i when there are three tanks with b = 3.33m in question 11. Omar bin Yaakob, July 008 9

30 Appendix A Naval Architecture Notes Second Moments of Areas The second moment of an element of an area about an axis is equal to the product of the area and the square of its distance from the axis. Let da in Figure A.1 represent an element of an area and let y be its distance from the axis AB da y A Fig. A.1 B The second moment of the element about AB is equal to da x y. To find the second moment of a rectangle about an axis parallel to one of its sides and passing through the centroid l dx x A G b B Fig. A. In Figure A., l represents the length of the rectangle and b represents the breadth. Let G be the centroid and let AB, an axis parallel to one of the sides, pass through the centroid. Omar bin Yaakob, July

31 Naval Architecture Notes Consider the elementary strip which is shown shaded in the figure. The second moment (i) of the strip about the axis AB is given by the equation:- i= l dx x x Let I AB be the second moment of the whole rectangle about the axis AB then:- b/ 1 l. x. dx AB -b/ b/ 1 l x. dx AB -b/ 3 x l 3 b / b / 1 AB 3 lb 1 3. To find the second moment of a rectangle about one of its sides. l dx b x A Fig. A.3 B Consider the second moment (i) of the elementary strip shown in Figure A.3 about the axis AB. i= l dx x x Omar bin Yaakob, July

32 Let I AB be the second moment of the rectangle about the axis AB. Then :- b 1 x AB l.. dx O Naval Architecture Notes x 3 l 3 b O or 1 AB 3 lb 3 4. The Theorem of Parallel Axes The second moment of an area about an axis through the centroid is equal to the second moment about any other axis parallel to the first reduced by the product of the area and the square of the perpendicular distance between the two axes. Thus, in Figure A.4, if G represents the centroid of the area (A) and the axis OZ is parallel to AB then:- IOZ IAB - Ay A B y O Z G Fig. A.4 Omar bin Yaakob, July 008 3

33 Naval Architecture Notes 5. Second moment of area of a circle X A D y B X Fig. A.5 For circle, the second moment of area about an axis AB. I AB D 64 4 What is I XX? 6. Applications. Second moment of areas are used in calculations of BM L and BM T : BM L I F and BM T I T Where I F is longitudinal second moment of area of the waterplane about the centre of floatation, I T is transverse second moment of area about the centreline and is volume displacement. Omar bin Yaakob, July

34 Naval Architecture Notes EXERCISES 1. Find BM L and BM T of a box shaped barge 10m x 0m x 10m floating at a draught of 7m.. A cylinder of radius r = 10m is floating upright at draught of 6m in fresh water. Find its KM L and KM T. 3. A fish cage consists of a wooden platform placed on used oil drums with the following dimensions. 6m 4m If the total weight of the structure is 3 tonnes, floating in sea water calculate: i) draught ii) KM T iii) KM L Diameter 1m. Homework 3: A catamaran consists of two box-shaped hulls spaced 5m apart, centreline to centreline. Each hull measures (L x B x D) 10m x 0.5m x 1m. If its draught is 0.3m, find its : i) and ii) KB iii) BM T iv) Maximum allowable KG if GM minimum is 0.m Submission Date: Omar bin Yaakob, July

35 Chapter 4 Calculations of Ship Hydrostatic Particulars Naval Architecture Notes 4.1 The Importance of Hydrostatic Particulars In the previous chapter, we have seen the importance of knowing the hydrostatic particulars of a vessel. If we have the hydrostatic particulars in the form of tables, curves, or our own direct calculation, we can obtain details about the ship in any particular condition. We can also determine or estimate what would happen when ship condition changes such as due to addition or removal of weights. To draw hydrostatic curves or to make the table, we need to calculate the particulars. The hydrostatic particulars can be obtained only if we carry out calculations of area, volumes and moment at various draughts or water plane area. Using some known relationships, the particulars can be derived from areas, volumes and moments, If the body has a uniform shape, such as cuboids, cones, spheres or prisms, calculation of areas, volumes and moments are easy. For example water plane areas, block coefficients, TPC, MCTC, KB and LCB of such objects can be found using simple formulae. We can easily obtain the particulars at any draught and if necessary plot the curves. However not all ships have simple and uniform shapes as above. In fact, most ships have hull shapes which are varying in three directions. This makes it difficult to calculate hydrostatic particulars. 4. Methods to Calculate Areas Figure 4.1 Typical Ship Half-Breadth Plan Consider the shape of the ship whose body plan is shown in Figure 4.1. If we want to find the area of the section or water plane for example, we do not have simple methods. Similarly to find volume displacement or LCF will not be easy. If we want calculate the water plane area of the ship in Figure 4.1 at a particular draught, we may use a few methods. Omar bin Yaakob, July

36 Naval Architecture Notes First is to plot the curve on a graph paper from where the area under the curve can be obtained by counting the squares. To improve accuracy, smaller boxes or triangles can be used. The method is tedious and it s accuracy depends on the size of the smallest grid. To use this method, we need to plot the curve first; a disadvantage when sometimes we are only provided with offset data, i.e. halfbreadth at various stations. The second method is to use an equipment called the planimeter. This equipment can be used to measure the area of a shape drawn on paper. Again, this equipment can only be used only when hard copy of the waterline drawing is available. Moreover, similar to graphical method, planimeter requires a lot of man power. Figure 3. A Planimeter The third method is to use mathematical approximation. In this method, an attempt is made to represent the curve or shape by a mathematical expression. By using calculus, area and moments of the area bounded by the curve can be found by integration. Mathematical methods are normally preferred for a number of reasons. First there is no need for a hard copy of the curves. Offset tables are normally available and the data can be used directly in the calculations. A very important feature of mathematical methods is the ability to make use of the technology offered by computers. The use of mathematical methods also enable us to obtain not only areas but all hydrostatic particulars. As we have seen in chapter 3, we need to calculate not only areas but also volumes, positions of centroids of waterplanes (LCF) and centroids of volumes (KB and LCB). In addition we require second moments of areas for calculations of MCTC and metacentric heights. Unlike graphical or planimeter methods, mathematical methods can easily be used to calculate these particulars. A very important caution should be noted when using mathematical methods. The accuracy of the calculations will mainly depend on the degree of fit of the actual curve to the mathematical expression representing it. 4.3 Mathematical Methods Omar bin Yaakob, July ST1 ST ST3 ST4 ST5 h offset

37 Naval Architecture Notes Figure 4.3 Waterline or Sectional Area Curve Figure 4.3 shows a curve which may represent a half-waterplane area or a curve of sectional areas. A waterplane curve is represented by offsets made up of halfbreadth at various stations. Stations are positions along the length of the ship and normally separated by a common-interval, h. To cater for the fast changing slopes of the curve at the stern and bow regions, half stations may be used. To calculate the area, centroid and moment under such curve, its offsets and h are required. By assuming that the curve can be represented by a certain mathematical formulae, calculations can be made. A number of methods have been developed for these purpose such as Newton-Cottes, Tchebycheff, Trapezoidal and Simpson methods. In this course, we will concentrate on the two most popular methods; Trapezoidal and Simpson methods. 4.4 Trapezoidal Method When a curve can be assumed to be represented by a set of trapezoids, the area under the curve can be calculated. C D E B y1 y y3 y4 A h F Figure 4.4 Waterline or Sectional Area Curve In Figure 4.4, the area under the curve is the are area of trapezoid ABCDEF. Area = = 1 y y h y y h y y 1 1 h y 1 1 y y 3 3 y Exercise 1. Find the Trapezoidal formulae for curves made up of Omar bin Yaakob, July

38 i) 6 offsets ii) 9 offsets iii) n offsets Naval Architecture Notes. The midship section of a chine vessel has the following offsets: Draught(m) Half-breadth (m) Calculate its midship section coefficient at draught of 1.00m. 3. Find the water plane area of a ship LBP = 10m made up of the following offsets: Station Half-breadth (m) Find its area, TPC and waterplane coefficient 4.5 Simpson Rules for Areas. Simpson rule is the most popular method being used in ship calculations to calculate volumes, second moments of areas and centroid. This is because it is flexible, easy to use and its mathematical basis is easily understood. Basically, the rule states that the ship waterlines or sectional area curves can be represented by polynomials. By using calculus, the areas, volumes, centroids and moments can be calculated. Since the separation between stations are constant, the calculus has been simplified by using multiplying factors or multipliers. There are three Simpson rules, depending on the number and locations of the offsets Simpson First Rule Simpson s First Rule C D B y1 y y3 A -h O h E Figure 4.5 Waterline or Sectional Area Curve with Three Offsets Omar bin Yaakob, July

Chapter 3 Hydrostatics and Floatation

Chapter 3 Hydrostatics and Floatation Chapter 3 Hydrostatics and Floatation Naval Architecture Notes 3.1 Archimedes Law of Floatation Archimedes (born 287 B.C) Law states that An object immersed in a liquid experience a lift equivalent to

More information

S0300-A6-MAN-010 CHAPTER 2 STABILITY

S0300-A6-MAN-010 CHAPTER 2 STABILITY CHAPTER 2 STABILITY 2-1 INTRODUCTION This chapter discusses the stability of intact ships and how basic stability calculations are made. Definitions of the state of equilibrium and the quality of stability

More information

SHIP HYDROSTATICS AND STABILITY

SHIP HYDROSTATICS AND STABILITY [Type text] SHIP HYDROSTATICS AND STABILITY A SYSTEMATIC APPROACH Omar bin Yaakob A systematic Approach Table of Content Table of Content... ii Preface... iv Chapter 1 Ship Types, Basic Terms, Terminologies

More information

SECOND ENGINEER REG III/2 NAVAL ARCHITECTURE

SECOND ENGINEER REG III/2 NAVAL ARCHITECTURE SECOND ENGINEER REG III/2 NAVAL ARCHITECTURE LIST OF TOPICS A B C D E F G H I J Hydrostatics Simpson's Rule Ship Stability Ship Resistance Admiralty Coefficients Fuel Consumption Ship Terminology Ship

More information

CERTIFICATES OF COMPETENCY IN THE MERCHANT NAVY MARINE ENGINEER OFFICER

CERTIFICATES OF COMPETENCY IN THE MERCHANT NAVY MARINE ENGINEER OFFICER CERTIFICATES OF COMPETENCY IN THE MERCHANT NAVY MARINE ENGINEER OFFICER EXAMINATIONS ADMINISTERED BY THE SCOTTISH QUALIFICATIONS AUTHORITY ON BEHALF OF THE MARITIME AND COASTGUARD AGENCY STCW 95 CHIEF

More information

Final KG plus twenty reasons for a rise in G

Final KG plus twenty reasons for a rise in G Chapter 3 Final KG plus twenty reasons for a rise in G hen a ship is completed by the builders, certain written stability information must be handed over to the shipowner with the ship. Details of the

More information

Hydrostatics and Stability Prof. Dr. Hari V Warrior Department of Ocean Engineering and Naval Architecture Indian Institute of Technology, Kharagpur

Hydrostatics and Stability Prof. Dr. Hari V Warrior Department of Ocean Engineering and Naval Architecture Indian Institute of Technology, Kharagpur Hydrostatics and Stability Prof. Dr. Hari V Warrior Department of Ocean Engineering and Naval Architecture Indian Institute of Technology, Kharagpur Module No. # 01 Lecture No. # 23 Trim Calculations -

More information

Chapter 2 Hydrostatics and Control

Chapter 2 Hydrostatics and Control Chapter 2 Hydrostatics and Control Abstract A submarine must conform to Archimedes Principle, which states that a body immersed in a fluid has an upward force on it (buoyancy) equal to the weight of the

More information

SHIP FORM DEFINITION The Shape of a Ship

SHIP FORM DEFINITION The Shape of a Ship SHIP FORM DEFINITION The Shape of a Ship The Traditional Way to Represent the Hull Form A ship's hull is a very complicated three dimensional shape. With few exceptions an equation cannot be written that

More information

Marine Kit 4 Marine Kit 4 Sail Smooth, Sail Safe

Marine Kit 4 Marine Kit 4 Sail Smooth, Sail Safe Marine Kit 4 Marine Kit 4 Sail Smooth, Sail Safe Includes Basic ship Terminologies and Investigation Check list Index 1. Ship Terminology 03 2. Motions of a Floating Body...09 3. Ship Stability.10 4. Free

More information

This lesson will be confined to the special case of ships at rest in still water. Questions of motions resulting from waves are not considered at

This lesson will be confined to the special case of ships at rest in still water. Questions of motions resulting from waves are not considered at STATIC STABILITY When we say a boat is stable we mean it will (a) float upright when at rest in still water and (b) return to its initial upright position if given a slight, temporary deflection to either

More information

Chapter 5 Transverse Stability

Chapter 5 Transverse Stability Chapter 5 Transverse Stability Naval Architecture Notes Consider a ship floating upright as shown in Figure 5.1. The centres of gravity and buoyancy are on the centre line. The resultant force acting on

More information

CLASS 1E 8 SMOOTH WATERS OPERATIONS 8

CLASS 1E 8 SMOOTH WATERS OPERATIONS 8 Table of Contents INSTRUCTION TO MASTERS SAFETY INFORMATION 3 STABILITY BOOK TO BE KEPT ON VESSEL 3 LOADING CONDITIONS 3 ASPECTS OF LOADING 3 PASSENGER PARTICULARS 3 HYDROSTATIC AND KN VALUES 4 EXCESS

More information

Ship Stability. Ch. 8 Curves of Stability and Stability Criteria. Spring Myung-Il Roh

Ship Stability. Ch. 8 Curves of Stability and Stability Criteria. Spring Myung-Il Roh Lecture Note of Naval Architectural Calculation Ship Stability Ch. 8 Curves of Stability and Stability Criteria Spring 2016 Myung-Il Roh Department of Naval Architecture and Ocean Engineering Seoul National

More information

Hydrostatics and Stability Dr. Hari V Warrior Department of Ocean Engineering and Naval Architecture Indian Institute of Technology, Kharagpur

Hydrostatics and Stability Dr. Hari V Warrior Department of Ocean Engineering and Naval Architecture Indian Institute of Technology, Kharagpur Hydrostatics and Stability Dr. Hari V Warrior Department of Ocean Engineering and Naval Architecture Indian Institute of Technology, Kharagpur Module No.# 01 Lecture No. # 01 Introduction Hello everybody.

More information

EN400 LAB #2 PRELAB. ARCHIMEDES & CENTER of FLOTATION

EN400 LAB #2 PRELAB. ARCHIMEDES & CENTER of FLOTATION EN400 LAB #2 PRELAB ARCHIMEDES & CENTER of FLOTATION Instructions: 1. The prelab covers theories that will be examined experimentally in this lab. 2. The prelab is to be completed and handed in to your

More information

Hydrostatics and Stability Dr. Hari V Warrior Department of Ocean Engineering and Naval Architecture Indian Institute of Technology, Kharagpur

Hydrostatics and Stability Dr. Hari V Warrior Department of Ocean Engineering and Naval Architecture Indian Institute of Technology, Kharagpur Hydrostatics and Stability Dr. Hari V Warrior Department of Ocean Engineering and Naval Architecture Indian Institute of Technology, Kharagpur Module No. # 01 Lecture No. # 22 Righting Stability II We

More information

FLUID MECHANICS. Fluid Statics BUOYANCY. Fig. Buoyancy CENTER OF BUOYANCY

FLUID MECHANICS. Fluid Statics BUOYANCY. Fig. Buoyancy CENTER OF BUOYANCY FLUID MECHANICS Fluid Statics BUOYANCY When a body is either wholly or partially immersed in a fluid, the hydrostatic lift due to the net vertical component of the hydrostatic pressure forces experienced

More information

Visit Us:

Visit Us: Visit Us: www.officerofthewatch.co.uk www.officerofthewatch.co.uk JUL-Y 2005 STABILITY AND STRUCTURE Attempt ALL questions Marks for each part question are shown in brackets 1. A vessel is to transit

More information

WATERTIGHT INTEGRITY. Ship is divided into watertight compartments by means of transverse and longitudinal bulkheads bulkheads.

WATERTIGHT INTEGRITY. Ship is divided into watertight compartments by means of transverse and longitudinal bulkheads bulkheads. Damage Stability WATERTIGHT INTEGRITY Ship is divided into watertight compartments by means of transverse and longitudinal bulkheads bulkheads. When a watertight compartment (or a group of compartments)

More information

OPERATIONS SEAFARER CERTIFICATION GUIDANCE NOTE SA MARITIME QUALIFICATIONS CODE

OPERATIONS SEAFARER CERTIFICATION GUIDANCE NOTE SA MARITIME QUALIFICATIONS CODE Page 1 of 8 Compiled by Chief Examiner Approved by Qualifications Committee: 27 September 2013 OPERATIONS SEAFARER CERTIFICATION GUIDANCE NOTE SA MARITIME QUALIFICATIONS CODE Page 2 of 8 KNOWLEDGE, UNDERSTANDING

More information

Stability Information Booklet. Priority Pontoon

Stability Information Booklet. Priority Pontoon Stability Information Booklet Priority Pontoon Lightship Index General Particulars...3 General Details...4 Plan - GA...5 Plan - Frames...6 General Precautions against capsizing...7 Special Notes Regarding

More information

Report on inclining test and light ship survey

Report on inclining test and light ship survey Report 79 Report on inclining test and light ship survey Nae of ship (Yard no. and yard): Signal letters: Carried out, place and date: Suary of results: Light ship weight: tonnes Vertical centre of gravity,

More information

Have you seen a truck weighing bridge? Do you know how it works?

Have you seen a truck weighing bridge? Do you know how it works? Have you seen a truck weighing bridge? Do you know how it works? Weigh bridge It weighs the empty weight of the truck and then the loaded weight. The difference is the weight of the cargo on that truck.

More information

COURSE NUMBER: ME 321 Fluid Mechanics I Fluid statics. Course teacher Dr. M. Mahbubur Razzaque Professor Department of Mechanical Engineering BUET

COURSE NUMBER: ME 321 Fluid Mechanics I Fluid statics. Course teacher Dr. M. Mahbubur Razzaque Professor Department of Mechanical Engineering BUET COURSE NUMBER: ME 321 Fluid Mechanics I Fluid statics Course teacher Dr. M. Mahbubur Razzaque Professor Department of Mechanical Engineering BUET 1 Fluid statics Fluid statics is the study of fluids in

More information

CERTIFICATES OF COMPETENCY IN THE MERCHANT NAVY MARINE ENGINEER OFFICER

CERTIFICATES OF COMPETENCY IN THE MERCHANT NAVY MARINE ENGINEER OFFICER CERTIFICATES OF COMPETENCY IN THE MERCHANT NAVY MARINE ENGINEER OFFICER EXAMINATIONS ADMINISTERED BY THE SCOTTISH QUALIFICATIONS AUTHORITY ON BEHALF OF THE MARITIME AND COASTGUARD AGENCY STCW 78 as amended

More information

Trim and Stability Report for M.V. Storm Warning

Trim and Stability Report for M.V. Storm Warning Pacific Motor Boat Design/R. W. Etsell, P.E. Naval Architecture and Marine Engineering Trim and Stability Report for M.V. Storm Warning for Kimberlin s Water Taxi Valdez, Alaska Prepared by Richard W.

More information

Ship Stability September 2013 Myung-Il Roh Department of Naval Architecture and Ocean Engineering Seoul National University

Ship Stability September 2013 Myung-Il Roh Department of Naval Architecture and Ocean Engineering Seoul National University Planning Procedure of Naval Architecture and Ocean Engineering Ship Stability September 2013 Myung-Il Roh Department of Naval Architecture and Ocean Engineering Seoul National University 1 Ship Stability

More information

. In an elevator accelerating upward (A) both the elevator accelerating upward (B) the first is equations are valid

. In an elevator accelerating upward (A) both the elevator accelerating upward (B) the first is equations are valid IIT JEE Achiever 2014 Ist Year Physics-2: Worksheet-1 Date: 2014-06-26 Hydrostatics 1. A liquid can easily change its shape but a solid cannot because (A) the density of a liquid is smaller than that of

More information

Exam Question 9: Hydrostatics. March 6, Applied Mathematics: Lecture 8. Brendan Williamson. Introduction. Density, Weight and Volume

Exam Question 9: Hydrostatics. March 6, Applied Mathematics: Lecture 8. Brendan Williamson. Introduction. Density, Weight and Volume Exam Question 9: Hydrostatics March 6, 2017 This lecture is on hydrostatics, which is question 9 of the exam paper. Most of the situations we will study will relate to objects partly or fully submerged

More information

In the liquid phase, molecules can flow freely from position to position by sliding over one another. A liquid takes the shape of its container.

In the liquid phase, molecules can flow freely from position to position by sliding over one another. A liquid takes the shape of its container. In the liquid phase, molecules can flow freely from position to position by sliding over one another. A liquid takes the shape of its container. In the liquid phase, molecules can flow freely from position

More information

In the liquid phase, molecules can flow freely from position. another. A liquid takes the shape of its container. 19.

In the liquid phase, molecules can flow freely from position. another. A liquid takes the shape of its container. 19. In the liquid phase, molecules can flow freely from position to position by sliding over one another. A liquid takes the shape of its container. In the liquid phase, molecules can flow freely from position

More information

A Guide to the Influence of Ground Reaction on Ship Stability

A Guide to the Influence of Ground Reaction on Ship Stability Journal of Shipping and Ocean Engineering 6 (2017) 262-273 doi 10.17265/2159-5879/2017.06.004 D DAVID PUBLISHING A Guide to the Influence of Ground Reaction on Ship Stability Ahmed Helmy Abouelfadl and

More information

Irrigation &Hydraulics Department lb / ft to kg/lit.

Irrigation &Hydraulics Department lb / ft to kg/lit. CAIRO UNIVERSITY FLUID MECHANICS Faculty of Engineering nd Year CIVIL ENG. Irrigation &Hydraulics Department 010-011 1. FLUID PROPERTIES 1. Identify the dimensions and units for the following engineering

More information

FC-CIV HIDRCANA: Channel Hydraulics Flow Mechanics Review Fluid Statics

FC-CIV HIDRCANA: Channel Hydraulics Flow Mechanics Review Fluid Statics FC-CIV HIDRCANA: Channel Hydraulics Flow Mechanics Review Fluid Statics Civil Engineering Program, San Ignacio de Loyola University Objective Calculate the forces exerted by a fluid at rest on plane or

More information

Load lines and freeboard marks

Load lines and freeboard marks Chapter 8 Load lines and freeboard marks The link Freeboard and stability curves are inextricably linked. With an increase in the freeboard: Righting levers (GZ) are increased. GM T increases. Range of

More information

Stability and Computational Flow Analysis on Boat Hull

Stability and Computational Flow Analysis on Boat Hull Vol. 2, Issue. 5, Sept.-Oct. 2012 pp-2975-2980 ISSN: 2249-6645 Stability and Computational Flow Analysis on Boat Hull A. Srinivas 1, V. Chandra sekhar 2, Syed Altaf Hussain 3 *(PG student, School of Mechanical

More information

PHYS 101 Previous Exam Problems

PHYS 101 Previous Exam Problems PHYS 101 Previous Exam Problems CHAPTER 14 Fluids Fluids at rest pressure vs. depth Pascal s principle Archimedes s principle Buoynat forces Fluids in motion: Continuity & Bernoulli equations 1. How deep

More information

Multihull Preliminary Stability Estimates are Fairly Accurate

Multihull Preliminary Stability Estimates are Fairly Accurate Multihull Design (Rev. A) 45 APPENDIX A ADDITIONAL NOTES ON MULTIHULL DESIGN MULTIHULL STABILITY NOTES Multihull stability is calculated using exactly the same method as described in Westlawn book 106,

More information

Safety practices related to small fishing vessel stability

Safety practices related to small fishing vessel stability 18 The vessel s centre of gravity (G) has a distinct effect on the righting lever (GZ) and consequently the ability of a vessel to return to the upright position. The lower the centre of gravity (G), the

More information

COURSE OBJECTIVES CHAPTER 2

COURSE OBJECTIVES CHAPTER 2 COURSE OBJECTIVES CHAPTER 2 2. HULL FORM AND GEOMETRY 1. Be familiar with ship classifications 2. Explain the difference between aerostatic, hydrostatic, and hydrodynamic support 3. Be familiar with the

More information

ANNEX 5 IMO MARINE CASULATY AND INCIDENT REPORT DAMAGE CARDS* AND INTACT STABILITY CASUALTY RECORDS

ANNEX 5 IMO MARINE CASULATY AND INCIDENT REPORT DAMAGE CARDS* AND INTACT STABILITY CASUALTY RECORDS ANNEX 5 IMO MARINE CASUATY AND INCIDENT REPORT DAMAGE CARDS* AND INTACT STABIITY CASUATY RECORDS Statistics of damaged ships and of intact stability casualties are important to the work of the Organization

More information

Lab test 4 Seakeeping test with a model of an oil tanker

Lab test 4 Seakeeping test with a model of an oil tanker Lab test 4 Seakeeping test with a model of an oil tanker The response amplitude operators (RAO) in head seas of a 1:100 scale model of a 257 m long oil tanker shall be determined by model testing in the

More information

EXPERIMENT (2) BUOYANCY & FLOTATION (METACENTRIC HEIGHT)

EXPERIMENT (2) BUOYANCY & FLOTATION (METACENTRIC HEIGHT) EXPERIMENT (2) BUOYANCY & FLOTATION (METACENTRIC HEIGHT) 1 By: Eng. Motasem M. Abushaban. Eng. Fedaa M. Fayyad. ARCHIMEDES PRINCIPLE Archimedes Principle states that the buoyant force has a magnitude equal

More information

Subj: Explanation of Upper Level Capacity and Stability Characteristics for Rolling Boat, Inc. Vessels.

Subj: Explanation of Upper Level Capacity and Stability Characteristics for Rolling Boat, Inc. Vessels. 23 Apr, 2009 From: Tullio Celano III P.E. To: Underwriters of Rolling Boat, Inc. Via: Phil Kazmierowicz, President, Rolling Boat, Inc. Subj: Explanation of Upper Level Capacity and Stability Characteristics

More information

RULES PUBLICATION NO. 86/P EXPLANATORY NOTES TO SOLAS CONVENTION AND DIRECTIVE 2003/25/EC STABILITY AND SUBDIVISION REQUIREMENTS

RULES PUBLICATION NO. 86/P EXPLANATORY NOTES TO SOLAS CONVENTION AND DIRECTIVE 2003/25/EC STABILITY AND SUBDIVISION REQUIREMENTS RULES PUBLICATION NO. 86/P EXPLANATORY NOTES TO SOLAS CONVENTION AND DIRECTIVE 2003/25/EC STABILITY AND SUBDIVISION REQUIREMENTS 2011 Publications P (Additional Rule Requirements) issued by Polski Rejestr

More information

STABILITY OF MULTIHULLS Author: Jean Sans

STABILITY OF MULTIHULLS Author: Jean Sans STABILITY OF MULTIHULLS Author: Jean Sans (Translation of a paper dated 10/05/2006 by Simon Forbes) Introduction: The capsize of Multihulls requires a more exhaustive analysis than monohulls, even those

More information

Tall Ships America Safety Under Sail Forum: Sailing Vessel Stability, Part 1: Basic Concepts

Tall Ships America Safety Under Sail Forum: Sailing Vessel Stability, Part 1: Basic Concepts Tall Ships America Safety Under Sail Forum: Sailing Vessel Stability, Part 1: Basic Concepts Moderator: Captain Rick Miller, MMA Panelists: Bruce Johnson, Co-Chair Working Vessel Operations and Safety

More information

Understanding How Excessive Loading Lead to a Capsize with Loss of Life Can Help Avoid Future Tragedies

Understanding How Excessive Loading Lead to a Capsize with Loss of Life Can Help Avoid Future Tragedies Understanding How Excessive Loading Lead to a Capsize with Loss of Life Can Help Avoid Future Tragedies By Dave Gerr, CEng FRINA 2012 Dave Gerr fter sailing out to watch the fireworks on July 4th, 2012,

More information

MSC Guidelines for the Submission of Stability Test (Deadweight Survey or Inclining Experiment) Results

MSC Guidelines for the Submission of Stability Test (Deadweight Survey or Inclining Experiment) Results S. E. HEMANN, CDR, Chief, Hull Division References a. 46 CFR 170, Subpart F Determination of Lightweight Displacement and Centers of Gravity b. NVIC 17-91 Guidelines for Conducting Stability Tests c. ASTM

More information

National Maritime Center

National Maritime Center National Maritime Center Providing Credentials to Mariners (Sample Examination) Page 1 of 7 Choose the best answer to the following Multiple Choice Questions. 1. The sailing drafts are: FWD 14'-08", AFT

More information

The Physics of Water Ballast

The Physics of Water Ballast The Physics of Water Ballast Nick Newland recently wrote an informative article on water ballast for Water Craft magazine (Newland 2015). Following a discussion on the Swallow Boats Association Forum,

More information

Homework of chapter (3)

Homework of chapter (3) The Islamic University of Gaza, Civil Engineering Department, Fluid mechanics-discussion, Instructor: Dr. Khalil M. Al Astal T.A: Eng. Hasan Almassri T.A: Eng. Mahmoud AlQazzaz First semester, 2013. Homework

More information

Objectives deals with forces applied by fluids at rest or in rigid-body motion.

Objectives deals with forces applied by fluids at rest or in rigid-body motion. Objectives deals with forces applied by fluids at rest or in rigid-body motion. The fluid property responsible for those forces is pressure, which is a normal force exerted by a fluid per unit area. discussion

More information

Science 8 Chapter 9 Section 1

Science 8 Chapter 9 Section 1 Science 8 Chapter 9 Section 1 Forces and Buoyancy (pp. 334-347) Forces Force: anything that causes a change in the motion of an object; a push or pull on an object balanced forces: the condition in which

More information

STABILITY & TRIM (MT4241)

STABILITY & TRIM (MT4241) MASSACHUSETTS MARITIME ACADEMY DEPARTMENT OF MARINE TRANSPORTATION STABILITY & TRIM (MT4241) I. LEARNING OBJECTIVES FALL 2015 This course is designed to meet all stability, knowledge based assessments,

More information

RULES FOR THE CLASSIFICATION AND CONSTRUCTION OF SEA-GOING SHIPS

RULES FOR THE CLASSIFICATION AND CONSTRUCTION OF SEA-GOING SHIPS RULES FOR THE CLASSIFICATION AND CONSTRUCTION OF SEA-GOING SHIPS PART IV STABILITY AND SUBDIVISION 2015 July GDAŃSK RULES FOR THE CLASSIFICATION AND CONSTRUCTION OF SEA-GOING SHIPS prepared and edited

More information

Page 1

Page 1 Contents: 1. Thrust and Pressure 2. Pressure in Fluids 3. Buoyancy 4. Why objects sink or Float when placed on surface of water? 5. Archimedes Principle 6. Relative Density Learning Objectives: The students

More information

1. All fluids are: A. gases B. liquids C. gases or liquids D. non-metallic E. transparent ans: C

1. All fluids are: A. gases B. liquids C. gases or liquids D. non-metallic E. transparent ans: C Chapter 14: FLUIDS 1 All fluids are: A gases B liquids C gases or liquids D non-metallic E transparent 2 Gases may be distinguished from other forms of matter by their: A lack of color B small atomic weights

More information

MERCHANT SHIP STABILITY

MERCHANT SHIP STABILITY MERCHANT SHIP STABILITY (METRIC EDITION) A Companion to "Merchant Ship Construction" BY H. J. PURSEY EXTRA MASTER Formerly Lecturer to the School of Navigation University of Southampton GLASGOW BROWN,

More information

RESOLUTION MSC.141(76) (adopted on 5 December 2002) REVISED MODEL TEST METHOD UNDER RESOLUTION 14 OF THE 1995 SOLAS CONFERENCE

RESOLUTION MSC.141(76) (adopted on 5 December 2002) REVISED MODEL TEST METHOD UNDER RESOLUTION 14 OF THE 1995 SOLAS CONFERENCE MSC 76/23/Add.1 RESOLUTION MSC.141(76) THE MARITIME SAFETY COMMITTEE, RECALLING Article 38(c) of the Convention on the International Maritime Organization concerning the functions of the Committee, RECALLING

More information

OFFSHORE RACING CONGRESS World Leader in Rating Technology

OFFSHORE RACING CONGRESS World Leader in Rating Technology OFFSHORE RACING CONGRESS World Leader in Rating Technology ORC SY MEASUREMENT GUIDANCE 2017 1. INTRODUCTION This paper must be taken as guidance for the process of boat measurement to allow for the issuance

More information

Numerical Modelling Of Strength For Hull Form Components Of A 700 Tonne Self-Propelled Barge Under Moment And Operational Loading

Numerical Modelling Of Strength For Hull Form Components Of A 700 Tonne Self-Propelled Barge Under Moment And Operational Loading IOSR Journal of Engineering (IOSRJEN) ISSN (e): 2250-3021, ISSN (p): 2278-8719 Vol. 05, Issue 05 (May. 2015), V1 PP 45-55 www.iosrjen.org Numerical Modelling Of Strength For Hull Form Components Of A 700

More information

STCW 1974, as amended, Regulation II: Written Assessment Syllabus for Bahamas Deck Officer Certificate of Competency:

STCW 1974, as amended, Regulation II: Written Assessment Syllabus for Bahamas Deck Officer Certificate of Competency: STCW 1974, as amended, Regulation II: Written Assessment Syllabus for Bahamas Deck Officer Certificate of Competency: Contents 1. Officer in Charge of Navigation Watch (OICNW) STCW Regulation II/1 (unlimited)

More information

Abstract. 1 Introduction

Abstract. 1 Introduction A computational method for calculatingthe instantaneous restoring coefficients for a ship moving in waves N. El-Simillawy College of Engineering and Technology, Arab Academyfor Science and Technology,

More information

Fluid Mechanics HYDRO STATICS

Fluid Mechanics HYDRO STATICS Fluid Mechanics HYDRO STATICS Fluid Mechanics STABILITY OF FLOATING BODIES Any floating body is subjected by two opposing vertical forces. One is the body's weight W which is downward, and the other is

More information

2 Available: 1390/08/02 Date of returning: 1390/08/17 1. A suction cup is used to support a plate of weight as shown in below Figure. For the conditio

2 Available: 1390/08/02 Date of returning: 1390/08/17 1. A suction cup is used to support a plate of weight as shown in below Figure. For the conditio 1. A suction cup is used to support a plate of weight as shown in below Figure. For the conditions shown, determine. 2. A tanker truck carries water, and the cross section of the truck s tank is shown

More information

OVERALL STABILITY 4.1 External Forces Acting on a Vessel In Chapter 4 we will study five areas:

OVERALL STABILITY 4.1 External Forces Acting on a Vessel In Chapter 4 we will study five areas: OVERALL STABILITY 4.1 External Forces Acting on a Vessel In Chapter 4 we will study five areas: 1. The concept of a ship s Righting Moment (RM), the chief measure of stability. 2. KG and TCG changes and

More information

Additional Information

Additional Information Buoyancy Additional Information Any object, fully or partially immersed in a fluid, is buoyed up by a force equal to the weight of the fluid displaced by the object. Archimedes of Syracuse Archimedes principle

More information

Old-Exam.Questions-Ch-14 T072 T071

Old-Exam.Questions-Ch-14 T072 T071 Old-Exam.Questions-Ch-14 T072 Q23. Water is pumped out of a swimming pool at a speed of 5.0 m/s through a uniform hose of radius 1.0 cm. Find the mass of water pumped out of the pool in one minute. (Density

More information

BUOYANCY, FLOATATION AND STABILITY

BUOYANCY, FLOATATION AND STABILITY BUOYANCY, FLOATATION AND STABILITY Archimedes Principle When a stationary body is completely submerged in a fluid, or floating so that it is only partially submerged, the resultant fluid force acting on

More information

Chapter 3 PRESSURE AND FLUID STATICS

Chapter 3 PRESSURE AND FLUID STATICS Fluid Mechanics: Fundamentals and Applications, 2nd Edition Yunus A. Cengel, John M. Cimbala McGraw-Hill, 2010 Chapter 3 PRESSURE AND FLUID STATICS Lecture slides by Hasan Hacışevki Copyright The McGraw-Hill

More information

National Maritime Center

National Maritime Center National Maritime Center Providing Credentials to Mariners Master TV to Master Less than 500 Gross Registered Tons Oceans or Near Coastal (Sample Examination) Page 1 of 6 Master TV to Master Less than

More information

CRITERIA OF BOW-DIVING PHENOMENA FOR PLANING CRAFT

CRITERIA OF BOW-DIVING PHENOMENA FOR PLANING CRAFT 531 CRITERIA OF BOW-DIVING PHENOMENA FOR PLANING CRAFT Toru KATAYAMA, Graduate School of Engineering, Osaka Prefecture University (Japan) Kentarou TAMURA, Universal Shipbuilding Corporation (Japan) Yoshiho

More information

Fluid Mechanics. Liquids and gases have the ability to flow They are called fluids There are a variety of LAWS that fluids obey

Fluid Mechanics. Liquids and gases have the ability to flow They are called fluids There are a variety of LAWS that fluids obey Fluid Mechanics Fluid Mechanics Liquids and gases have the ability to flow They are called fluids There are a variety of LAWS that fluids obey Density Regardless of form (solid, liquid, gas) we can define

More information

Stability Booklet (simplified) M/V Sea Breeze. 1 Ships Particulars Stability KGc-max curves according IMO Resolution A.749(18)...

Stability Booklet (simplified) M/V Sea Breeze. 1 Ships Particulars Stability KGc-max curves according IMO Resolution A.749(18)... Stability Booklet (simplified) M/V Sea Breeze Inhaltsverzeichnis 1 Ships Particulars...3 2 Stability...3 3 KGc-max curves according IMO Resolution A.749(18)...5 4 General Arrangement...6 5 Freeboard Mark...7

More information

Ship Resistance and Propulsion Prof. Dr. P. Krishnankutty Ocean Department Indian Institute of Technology, Madras

Ship Resistance and Propulsion Prof. Dr. P. Krishnankutty Ocean Department Indian Institute of Technology, Madras Ship Resistance and Propulsion Prof. Dr. P. Krishnankutty Ocean Department Indian Institute of Technology, Madras Lecture - 7 Air and Wind Resistance Dimensional Analysis I Coming back to the class, we

More information

A Study on Roll Damping of Bilge Keels for New Non-Ballast Ship with Rounder Cross Section

A Study on Roll Damping of Bilge Keels for New Non-Ballast Ship with Rounder Cross Section International Ship Stability Workshop 2013 1 A Study on Roll Damping of Bilge Keels for New Non-Ballast Ship with Rounder Cross Section Tatsuya Miyake and Yoshiho Ikeda Department of Marine System Engineering,

More information

(Refer Slide Time: 0:25)

(Refer Slide Time: 0:25) Port and Harbour Structures Prof. R. Sundaravadivelu Department of Ocean Engineering Indian Institute of Technology Madras Module 01 Lecture 04 Ships and Size of Ships So in this class we will continue

More information

Dec 6 3:08 PM. Density. Over the last two periods we discussed/observed the concept of density. What have we learned?

Dec 6 3:08 PM. Density. Over the last two periods we discussed/observed the concept of density. What have we learned? Over the last two periods we discussed/observed the concept of density. What have we learned? is a ratio of mass to volume describes how much matter is packed into a space is a property of both solids

More information

An Investigation into the Capsizing Accident of a Pusher Tug Boat

An Investigation into the Capsizing Accident of a Pusher Tug Boat An Investigation into the Capsizing Accident of a Pusher Tug Boat Harukuni Taguchi, National Maritime Research Institute (NMRI) taguchi@nmri.go.jp Tomihiro Haraguchi, National Maritime Research Institute

More information

RULES FOR THE CLASSIFICATION AND CONSTRUCTION OF SMALL SEA-GOING SHIPS

RULES FOR THE CLASSIFICATION AND CONSTRUCTION OF SMALL SEA-GOING SHIPS RULES FOR THE CLASSIFICATION AND CONSTRUCTION OF SMALL SEA-GOING SHIPS PART IV STABILITY, SUBDIVISION AND FREEBOARD 2015 January GDAŃSK RULES FOR THE CLASSIFICATION AND CONSTRUCTION OF SMALL SEA-GOING

More information

Vacuum P=0. h=76 cm A B C. Barometer

Vacuum P=0. h=76 cm A B C. Barometer Recap: Pressure Pressure = Force per unit area (P = F /A; units: Pascals) Density of object = mass / volume (ρ = m /V; units: kg / m 3 ) Pascal s Law:Pressure is transmitted equally in all directions throughout

More information

RULES FOR THE CONSTRUCTION AND CLASSIFICATION OF SHIPS IDENTIFIED BY THEIR MISSIONS CHAPTERS SCOPE

RULES FOR THE CONSTRUCTION AND CLASSIFICATION OF SHIPS IDENTIFIED BY THEIR MISSIONS CHAPTERS SCOPE PART II RULES FOR THE CONSTRUCTION AND CLASSIFICATION OF SHIPS IDENTIFIED BY THEIR MISSIONS TITLE 12 CONTAINER SHIPS SECTION 1 NAVAL ARCHITECTURE CHAPTERS A SCOPE B DOCUMENTS, REGULATIONS AND STANDARDS

More information

ISO NON-SAILING BOATS OF LENGTH GREATER THAN OR EQUAL TO 6 m CALCULATION WORKSHEET No. 1 Design:

ISO NON-SAILING BOATS OF LENGTH GREATER THAN OR EQUAL TO 6 m CALCULATION WORKSHEET No. 1 Design: ISO 12217-1 NON-SAILING BOATS OF LENGTH GREATER THAN OR EQUAL TO 6 m CALCULATION WORKSHEET No. 1 Design: Design Category intended: Monohull / multihull: Item Symbol Unit Value Ref. Length of hull as in

More information

MANOEUVRING BOOKLET V1.06

MANOEUVRING BOOKLET V1.06 MANOEUVRING BOOKLET V1.6 Mathematical model of Integrated Tug Barge 45 Version: v9 Dll Version: 2.31.558 According to: Solas II-1, regulation 28.3 St. Petersburg 26 1. GENERAL DESCRIPTION 1.1. Ships particulars

More information

ITTC Recommended Procedures and Guidelines

ITTC Recommended Procedures and Guidelines 7.5- -- Page 1 of 6 Table of Contents 1 PURPOSE OF PROCEDURE 2 2 PARAMETERS...2 2.1 Definition of Variables...2 3 DESCRIPTION OF PROCEDURE...2 3.1...2 3.1.1 Hull Model...2 3.1.2 Propeller Model...3 3.1.3

More information

RESCUE BOAT DESIGN UTILIZING REUSED PLASTIC BOTTLES FOR ACCIDENT PREVENTATION

RESCUE BOAT DESIGN UTILIZING REUSED PLASTIC BOTTLES FOR ACCIDENT PREVENTATION RESCUE BOAT DESIGN UTILIZING REUSED PLASTIC BOTTLES FOR ACCIDENT PREVENTATION Abstract- Fiberglass layer of rescue boat has tendency to crack when hit by a heavy wave or involves in accident. As an alternative

More information

Ship Resistance and Propulsion Prof. Dr. P. Krishnankutty Ocean Department Indian Institute of Technology, Madras

Ship Resistance and Propulsion Prof. Dr. P. Krishnankutty Ocean Department Indian Institute of Technology, Madras Ship Resistance and Propulsion Prof. Dr. P. Krishnankutty Ocean Department Indian Institute of Technology, Madras Lecture - 6 Bulbous Bow on Ship Resistance Welcome back to the class we have been discussing

More information

APPENDIX IV DEVELOPMENT AND MEASUREMENT RULES OF THE INTERNATIONAL TEN SQUARE METRE SAILING CANOE (JANUARY 2008) 1 GENERAL

APPENDIX IV DEVELOPMENT AND MEASUREMENT RULES OF THE INTERNATIONAL TEN SQUARE METRE SAILING CANOE (JANUARY 2008) 1 GENERAL APPENDIX IV DEVELOPMENT AND MEASUREMENT RULES OF THE INTERNATIONAL TEN SQUARE METRE SAILING CANOE (JANUARY 2008) 1 GENERAL Class and measurement rules measurement forms may be obtained from the I.C.F.

More information

Light draught m

Light draught m Tugboats 900hp tugboat 1200hp tugboat 2400hp ABS ocean going tugboat Built in 2010, brand-new LOA 30.00 m Length 27.76 m Length of waterline 28.75 m Breadth 7.50 m Depth 3.20 m Light draught 1.450 m Full-load

More information

The OTSS System for Drift and Response Prediction of Damaged Ships

The OTSS System for Drift and Response Prediction of Damaged Ships The OTSS System for Drift and Response Prediction of Damaged Ships Shoichi Hara 1, Kunihiro Hoshino 1,Kazuhiro Yukawa 1, Jun Hasegawa 1 Katsuji Tanizawa 1, Michio Ueno 1, Kenji Yamakawa 1 1 National Maritime

More information

Static Fluids. **All simulations and videos required for this package can be found on my website, here:

Static Fluids. **All simulations and videos required for this package can be found on my website, here: DP Physics HL Static Fluids **All simulations and videos required for this package can be found on my website, here: http://ismackinsey.weebly.com/fluids-hl.html Fluids are substances that can flow, so

More information

Figure 1: Level Pitch Positive Pitch Angle Negative Pitch Angle. Trim: The rotation of a vehicle from side to side. See Figure 2.

Figure 1: Level Pitch Positive Pitch Angle Negative Pitch Angle. Trim: The rotation of a vehicle from side to side. See Figure 2. Buoyancy, Stability, and Ballast 2 Cornerstone Electronics Technology and Robotics III (Notes primarily from Underwater Robotics Science Design and Fabrication, an excellent book for the design, fabrication,

More information

ConcepTest PowerPoints

ConcepTest PowerPoints ConcepTest PowerPoints Chapter 10 Physics: Principles with Applications, 6 th edition Giancoli 2005 Pearson Prentice Hall This work is protected by United States copyright laws and is provided solely for

More information

Quiz name: Chapter 13 Test Review - Fluids

Quiz name: Chapter 13 Test Review - Fluids Name: Quiz name: Chapter 13 Test Review - Fluids Date: 1. All fluids are A gases B liquids C gasses or liquids D non-metallic E transparent 2. 1 Pa is A 1 N/m B 1 m/n C 1 kg/(m s) D 1 kg/(m s 2 ) E 1 N/m

More information

From and

From  and From http://www.school-for-champions.com/science/fluidpressure.htm and http://www.school-forchampions.com/science/fluidfloating.htm by Ron Kurtus, School for Champions Pressure in Fluids by Ron Kurtus

More information

OPERATIONS SEAFARER CERTIFICATION GUIDANCE NOTE SA MARITIME QUALIFICATIONS CODE. Naval Architecture

OPERATIONS SEAFARER CERTIFICATION GUIDANCE NOTE SA MARITIME QUALIFICATIONS CODE. Naval Architecture Page 1 of 27 Compiled by Approved by Chief Examiner Syllabus Committee: 26 July 2013 OPERATIONS SEAFARER CERTIFICATION GUIDANCE NOTE SA MARITIME QUALIFICATIONS CODE Page 2 of 27 KNOWLEDGE, UNDERSTANDING

More information

Buoyancy and Density. Buoyant Force and Fluid Pressure. Key Concept Buoyant force and density affect whether an object will float or sink in a fluid.

Buoyancy and Density. Buoyant Force and Fluid Pressure. Key Concept Buoyant force and density affect whether an object will float or sink in a fluid. 2 Buoyancy and Density Key Concept Buoyant force and density affect whether an object will float or sink in a fluid. What You Will Learn All fluids exert an upward buoyant force on objects in the fluid.

More information

RULES PUBLICATION NO. 94/P SUBDIVISION AND DAMAGE STABILITY OF NEW OIL TANKERS, CHEMICAL TANKERS AND GAS CARRIERS January

RULES PUBLICATION NO. 94/P SUBDIVISION AND DAMAGE STABILITY OF NEW OIL TANKERS, CHEMICAL TANKERS AND GAS CARRIERS January RULES PUBLICATION NO. 94/P SUBDIVISION AND DAMAGE STABILITY OF NEW OIL TANKERS, CHEMICAL TANKERS AND GAS CARRIERS 2016 January Publications P (Additional Rule Requirements) issued by Polski Rejestr Statków

More information