Owner s Manual. Mode d emploi Instrucciones de uso. Manual de instrucções

Size: px
Start display at page:

Download "Owner s Manual. Mode d emploi Instrucciones de uso. Manual de instrucções"

Transcription

1 Models Covered: 2K HA / 4K HA 600 HI-CR 1.2K HMI / 2.5K HMI 1K HI-BT37 NAFTA Owner s Manual Mode d emploi Instrucciones de uso Manual de instrucções / B General Drive Unit A6 ORLANDO, FL USA Tel: (407) Fax: (407) info@airstar-light.us

2 Welcome To Airstar Thank you for choosing AIRSTAR. Your new Sirocco unit is hand assembled with pride in USA, and we are committed to your total customer satisfaction. Your ownership experience is extremely important to us and this user manual is designed to help keep your Sirocco performing at its highest level. Let There Be Light Your Sirocco is specifically designed to provide the highest quality light for nighttime workplace safety and productivity. It is perfect for use in a variety of worksite settings, rescue efforts, and any situation where a well-lit area is required to work. Models Covered In This Manual This manual covers the following Sirocco models: - Sirocco 2K (HA 2x1000W), Sirocco 600 (HI CR 4x150W), Sirocco 250 (HI HR 250W), Sirocco 1.2K (HMI 1200W), HMI 2.5K(HMI 2500W), Sirocco 1K (HI-BT W), Sirocco 4K HA (HA 4x1000W) EXTREMELY IMPORTANT SAFETY INSTRUCTIONS WARNING REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, EXPOSURE TO EXCESSIVE UV RADIATION, OR INJURY: 1. LIGHTED LAMPS ARE EXTREMELY HOT. Turn off, unplug, and allow unit to cool before touching lamp. 2. ALWAYS disconnect your Sirocco unit from power source prior to servicing. 3. Do Not touch lamp cage until completely cooled. 4. Do Not look directly at lighted lamp. 5. Do Not operate Sirocco unit near flammable materials. 6. Use a soft cloth or glove when handling lamps. Oil from skin may damage lamp during operation. 7. Do not operate your Sirocco with damaged electronics or if parts are missing. 8. Do not operate your Sirocco with a damaged envelope or without an envelope. 9. All service must be performed by Airstar designated technicians. See Warranty Info for details. 10. Sirocco units are designed to operate at heights of at least 5ft (1.5m). 11. Do not operate your stand-mounted Sirocco on an uneven surface or a grade of more than 8 degrees. 12. Do not use your Sirocco if wind speed exceeds 50mph (80km/h). 13. Use only recommended stands with an ability to support a 20lb (9kg) Sirocco unit, and endure wind speeds of up to 50mph (80km/h) at a height of 16.5ft (5m). WARNING ALWAYS USE CORRECT LAMPS FOR YOUR SIROCCO TO AVOID DAMAGE OR INJURY: 1. Sirocco HA 2x1000W : use only with HA 1000W R7S type lamp or smaller 2. Sirocco HA 4x1000W : use only with HA 1000W R7S type lamp or smaller 3. Sirocco HI CR 4x150W 230V : use only with HCI-T/P 150W E27 type lamp or equivalent 4. Sirocco HI CR 4x150W V : use only with M102/O 150W MEDIUM type lamp or equivalent 5. Sirocco HMI 1200W : use only with HMI 1200W G38 type lamp 6. Sirocco HMI 2500W : use only with HMI 2500W G38 type lamp 7. Sirocco HI-BT W : use only with HI-BT37 M47 ANSI 1000W type lamp WARNING When using outdoors, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following: 1. Sirocco 2M HA / HI CR / HI HR: Use only NEMA 5-15 Edison plug extension cords connected to the correct voltage electrical source outlets. 2. Always use Ground Fault Circuit Interrupter (GFCI) protection when operating your Sirocco in areas near water, and during inclement weather. KEEP THESE INSTRUCTIONS WITH YOUR SIROCCO UNIT FOR QUICK REFERENCE / B 2

3 Tips To Extend The Life Of Your Sirocco Unit 1.Use the included glove when handling lamps to prevent potential damage caused by transfer of oils and dirt to glass. 2.Always disconnect from power source before performing service. 3.Do not operate your Sirocco without its envelope or with a damaged envelope. 4.Protect the envelope by operating away from walls, projectiles, electric wires, trees, animals, etc. 5.DO NOT LEAVE DEFLATED ENVELOPE UNCOVERED OR UNATTENDED WHEN NOT IN USE. 6.Always use the included protective cover when storing your Sirocco. Failure to do so may result in loss of warranty coverage. 7.Store your Sirocco in a dry, well-ventilated area away from heat sources and chemical products. 8.Be sure that envelope is completely dry before installing protective cover. 9.Do not use chemical solvents to clean the envelope. Use mild soap and water as necessary. 10.Do not modify the electrical components or unit structure. 11.Do not operate your Sirocco if cable is damaged, twisted, or tangled. Recommended Generator Capacity For Sirocco Units NOTE: When using generator power, ALWAYS start your generator BEFORE plugging in your Sirocco unit. 1.Non-Ballast Sirocco Units Recommended Capacity : a) Sirocco HA 2x1000W : Single phase 120V 50-60Hz 3KVA b) Sirocco HA 2x1000W : Single phase 230V 50-60Hz 3KVA c) Sirocco HA 4x1000W : Single phase 120V 50-60Hz 5KVA d) Sirocco HA 4x1000W : Single phase 230V 50-60Hz 5KVA e) Sirocco HI CR 4x150W V : Single phase V 50-60Hz 1KVA f) Sirocco HI CR 4x150W 230V : Single phase 230V 50-60Hz 1KVA 2.Sirocco Units w/ballast Regulated Power Recommended Capacity g) Sirocco HMI 1200W 230V : 2KVA h) Sirocco HMI 2500W 230V : 5KVA i) Sirocco HI-BT W 120V : 2KVA WARNING: Be sure to avoid phase imbalance when several devices are connected to the same generator. Built-In Safety Systems Your Sirocco is equipped with special safety mechanisms that are designed to protect you and your Sirocco in the unlikely event of equipment failure or in certain unsafe operating conditions: - The Airstar Sirocco 600 (HI CR 4x150W) is equipped with a safety thermal switch that turns off the lamps if internal operating temperature rises to unsafe levels. - The Airstar HA, HMI, HI-T, HI-BT37 units are equipped with a safety pressure switch that turns off the lamps if internal envelope air pressure falls below safe operating levels. - If lamp starts blinking due to excessive heat, check and clean filter, be sure the fan is running and fresh air is circulating through the unit. Be sure the envelope is under consistent observation / B 3

4 Sirocco Parts List 1 5 2* 6 3* Sirocco Lamp Variations a b c d e *see detail at right 1 Nut 2 Internal Structure (Cage + Base + Support Stem) 3 Envelope 4 Power Supply Cable 5 Zipper 6 Lamp(s) (See Lamp Variations Pictured Above) a HA 1000W R7S lamp b HCI-T/P 150W E27 lamp M102/O 150W MEDIUM lamp c HMI 1200W G38 lamp d HMI 2500W G38 lamp e HI-BT W E39 ANSI lamp 7 South Pole Plate 8 Stand (Recommended Accessory. Sold separately.) 9 Repair Kit (2 Pieces) 10 Protective Storage Cover 11 Storage Tube 12 User Manual 13 Ballast (Required For Select Models) 14 Cotton Glove (For Lamp Replacement) / B 4

5 Envelope Installation Instructions When REPLACING an old envelope, FIRST remove original envelope: If currently in use, first turn unit off and let cool. Unplug the Sirocco unit and open the envelope zipper. Unscrew the nut on the top of the envelope. (Fig. 1) Set top nut in a secure place. Maneuver top of cage to unzipped opening and pass the cage through until fully exposed. Unhook the lamp holder springs (Fig. 2 only select Sirocco models) Remove lamp(s) from unit. (See Lamp Replacement Instructions for detailed information on lamp removal.) Unplug the ground wire from the cage. (Fig. 3 black arrow) Unscrew the six(6) nuts on the South Pole Plate at base of cage. (Fig. 3 white arrows) Remove zip-ties from cage crossbar and unhook red rubber tabs. (HI CR 4x150W Sirocco 600 model ONLY) Carefully remove the cage from assembly. Detach old envelope from assembly by sliding up along lamp assembly. Inspect South Pole Plate gasket (Fig. 4) for damage. Replace if damaged and ensure proper alignment. Slide South Pole opening of new envelope over electronic assembly. s Fig. 1 Fig. 2 Fig. 3 Install your NEW envelope: Unfold the envelope on a smooth, clean surface. Open the zipper Position zipper on same side of unit as ground wire. (Fig. 3) Ensure alignment of envelope holes on South Pole Plate. Slide the cage inside the envelope through the zipper opening. Align cage on South Pole baseplate with ground pin on the cage in line with ground wire on the unit. (Fig. 3) Reattach ground wire to ground pin on cage. Screw the six(6) South Pole Plate nuts onto the cage. (Fig. 3) Reinstall lamp(s). (See Lamp Replacement Instructions for detailed information on lamp removal.) Reconnect lamp holder springs (Fig. 2 only on select Sirocco models). Be sure to hook springs OVER the cage crossbars. Loosely replace the nut on the top of the envelope. Do not tighten until after envelope is fully inflated. Close zipper. Plug Sirocco unit into appropriate power source. (CAUTION: When plugging into ballast power, always plug your Sirocco unit into the ballast BEFORE plugging ballast into power source.) After envelope is fully inflated, tighten top nut. You are now ready to work. Disassembly Switch off, deflate, and store your Sirocco unit. Disconnect from power supply and let lamps cool completely. (PACKING HOT LAMPS WILL DAMAGE UNIT.) Open the envelope zipper to speed up deflation and cooling. Remove the Sirocco unit from stand or mount. Fig / B 5

6 When lamps are completely cooled, insert Sirocco unit into storage bag and store in included case. (Be sure envelope is dry before storage!) Lamp Replacement Instructions Sirocco 2K (HA 2x1000W) (Fig. 1) & Sirocco 4K HA (HA 4x1000W) (Fig. 2) Unplug the Sirocco unit and open the envelope zipper. (Be sure to let unit cool.) Using a glove, remove old lamps by grasping bulb firmly and applying downward pressure and sliding the top of the lamp out of the fixture, then lifting the lamp up and out of the fixture. Insert new lamps by inserting bottom of lamp into fixture, applying downward pressure, and then sliding top of lamp into the top of the fixture. Close the zipper. Fig. 1 Fig. 2 Sirocco 600 (HI CR 4x150W) Unplug the Sirocco unit and open the envelope zipper. (Be sure to let unit cool.) Unhook the lamp holder springs and place lamp holder aside. (Fig. 3) Fig. 3 Fig. 4 Using a glove, remove the old lamps and replace with new lamps. (Fig. 4) Replace top lamp holder and hook springs over the edge and up through lamp support plate. (Fig. 3) Close the zipper / B 6

7 Lamp Replacement Instructions (cont.) Sirocco 1.2K (HMI 1200W) Unplug the Sirocco unit and open the envelope zipper. (Be sure to let unit cool.) Unhook the lamp holder springs and place lamp holder aside. (Fig. 1) Fig. 1 Fig. 2 Using a glove, remove the old lamp and replace with new lamp. (Fig. 2) Replace lamp holder and hook springs over the edge and up through lamp support plate. (Fig. 1) Close the zipper. Sirocco 2.5K (HMI 2500W) Unplug the Sirocco unit and open the envelope zipper. (Be sure to let unit cool.) Using a glove, remove the old lamp and replace with new lamp. (Fig. 3) Close the zipper Fig / B 7

8 Lamp Replacement Instructions (cont.) Sirocco 1K (HI-BT W) Unplug the Sirocco unit and open the envelope zipper. (Be sure to let unit cool.) Unscrew the top-nut at the top of the envelope and set nut safely aside. (Fig. 1) Lift envelope off of the north pole pin and carefully slide unzipped envelope opening down around cage, toward south pole plate. Unscrew the nylon fasteners at the base of the lamp (inside the cage) that secure the included wrench. (Fig. 2 Arrows a. & b.) Using the wrench, loosen and remove the two nuts on the underside of the top brace and remove the top brace from the cage, allowing you to access the lamp. (Fig. 3) a. b. Fig. 1 Fig. 2 Fig. 3 Unhook the lamp holder springs and place lamp holder aside. (Fig. 4) Using a glove, remove the old lamp and replace with new lamp. (Fig. 5) Replace top lamp holder and hook springs evenly around cage as shown. (Fig. 4) Fig. 4 Fig. 5 Reinstall the plate on the top of the cage using the wrench. (Fig. 3) Reattach the included wrench using the included plastic thumb wheels. (Fig. 1) Carefully guide envelope back up around cage and guide the top pin through the top of the envelope. (Fig. 1) Loosely replace the nut on the top of the envelope. Do not tighten until envelope is fully inflated. (Fig. 1) Close the zipper. Plug-in the Sirocco unit to inflate the envelope. Hand-tighten the top nut to secure envelope to the cage / B 8

9 In The Event Of Broken Lamp(s) If a lamp breaks or cracks inside the envelope, disconnect the electrical power supply and disassemble the envelope. (see Envelope Installation Instructions) Be sure to remove all fragments of glass, using a vacuum cleaner to thoroughly clean the electronics and envelope. Handling glass fragments can cause serious injury. Installing Your Sirocco On A Stand NOTE: Always use Airstar-approved stands designed to work with your Sirocco unit. Always securely tighten all T-Handles to avoid injury. Stands are designed for vertical mounting of Sirocco units ONLY. ALWAYS use sandbags to weight stands properly. Airstar sandbags are recommended. Using the optional Airstar ST303 (Fig. 1) or ST101 or ST201(Fig. 2) stands. o Unfold the stand. o Lock the base in place. - On the ST303 (Fig. 1), lift the outer cylinder at the base slightly, then hook the oval locking ring over the safety hook. - On the ST101 or ST201 (Fig. 2), slide the stand legs out from the folded position until the support bars are exactly horizontal. o When using your stands in windy conditions, use the following weighting recommendations to keep your stand stable. - On the ST303 (Fig. 1), weights must be placed on each foot at 24 in (60 cm) from the center of the stand. - On the ST101 or ST201 (Fig. 2), weights must be placed on each support at 20 in (50 cm) from the center of the stand. - Use the table below to determine proper sandbag weighting. Wind speed Required Weight Per Leg Total Weight Required 0 6 mph N/A N/A 6 12 mph 40 lbs 120 lbs mph 66 lbs 140 lbs mph 154 lbs 465 lbs mph 265 lbs 795 lbs Fig. 1 Fig in (50 cm) 24in (60 cm) Load Load Load Load Load Load / B 9

10 When Operating Ballast Powered Sirocco Units Sirocco models that require a ballast: Sirocco 1K, Sirocco 1.2K, Sirocco 2500, and Sirocco 4K. ALWAYS PLUG SIROCCO UNIT INTO BALLAST BEFORE CONNECTING TO POWER OUTLET - Connect the Sirocco power cable to the ballast. - Securely lock the power cable connector to ballast socket. - Connect ballast to appropriate power supply. - Reverse procedure when shutting down your Sirocco unit. HI-T 1000W HI-BT W / HMI 1200W HMI 2500W ON ON OF F Maintenance Lamp It is important to inspect lamps regularly, and replace lamps showing signs of wear and tear. (i.e. cracked lamp, small fragments of glass or filament inside the lamp, or whitened lamp glass). Failure to do so could cause lamp failure, or possibly explosion, resulting in bodily injury and/or damage to the Sirocco unit.. To replace a lamp, please refer to Lamp Replacement Instructions in this manual. Envelope A damaged envelope must be repaired or replaced immediately. Regularly clean the envelope with mild soap and water. Citrus-based cleaners can be used, although be sure to test a small area before cleaning entire envelope. Patching A Hole o Be sure to thoroughly clean the area to be patched with mild soap and water and allow to dry. o Cut a square patch out of the included self-adhesive fabric sheet that is one inch wider and longer than the hole to be sure you can cover the entire damaged portion of the envelope. o Remove the protective film from the adhesive side of the patch material. o Carefully place the patch onto the damaged part of the envelope, firmly applying pressure to the areas of contact around the patch edge. Cleaning The Air Filter Remove sponge-type air filter, located under the south pole plate, by sliding along the support stand. Wash it or replace it Place clean air filter by the same way / B 10

11 Warranty At Airstar, we are very proud of our quality control and the reliability of our Sirocco product line. We also understand that there will occasionally be issues that require warranty service, so we offer the following coverage: Your Sirocco envelope, electronics, and structural components (excluding lamps) are guaranteed against manufacturing defects for 1 (one) year from the date of purchase. In the event of a manufacturing defect or possible warranty issue, call your Authorized Airstar Dealer to initiate a warranty claim. Send your Sirocco unit, along with a copy of your original invoice, to your Authorized Airstar Dealer for technical analysis. An Airstar certified technician will determine if your issue is covered under warranty. After repair, Airstar will return your Sirocco at our expense, via ground shipping. (Express available at extra charge.) If complete unit replacement is required, Airstar only ship replacement unit after receiving original unit. Airstar will not be held responsible for improper handling by the end user. Any operations on the envelope or electronic equipment that is not described in this manual, or any use of unapproved tools, components or lamps is not covered by this warranty and remains the sole responsibility of the user. Technical data sheets Units Sirocco 2 M HA 2x1000W Technical Data Sheet Sirocco 2 M HA 4x1000W Sirocco 2 M HI CR 4x150W E27 Sirocco 2 M HI-BT W Sirocco 2 M HMI 1200W Sirocco 2 M HMI 2500W Power supply V 120V V 220V 120V 230V 208V Hz 60Hz 60Hz 60Hz 60Hz 60Hz 50Hz 60Hz Luminous flux Lm Lm Lm Lm Lm Lm Lm Lamp Qty Power Per Lamp W 1000 W 1000 W 150 W 1000 W 1200 W 2500 W Bulb type - HA HA Metalhalide Metalhalide HI-BT37 M47 ANSI Bulb socket - R7S R7S MEDIUM E27 E39 G38 G38 Restrike type - Hot Hot Cold Cold Hot Hot Restrike time s Instant Instant >7 minutes >7 minutes <10 seconds <10 seconds Power supplied by exterior ballast - No No No (Built-In) Yes Yes Yes Colour temperature K 3200 K 3200 K 3000 K 3700 K 5600 K 5600 K Average bulb life h 300 h 300 h 12,000 h 12,000 h 750 h 500 h Protection type - Pressure switch Pressure switch Thermal cut-off Pressure switch HMI Pressure switch HMI Pressure switch Anti-vibration system - Yes Yes Yes Yes Yes Yes Envelope diameter in in 47 in 35.5 in 47 in 47 in 55 in Envelope shape - Tubular Tubular Tubular Tubular Tubular Tubular Bulb luminous efficacy Lw/W 27 Lm/W 27 Lm/W 97 Lm/W 115 Lm/W 92 Lm/W 96 Lm/W Weight lbs 11 lbs 20.7 lbs 16.5 lbs 14.3 lbs 16.5 lbs 18.3 lbs Power W 2020 W 4020 W 690 W 1100 W 1300 W 2700W Power generating unit KVA 3 KVA 5 KVA 1 KVA 2 KVA 2 KVA 5 KVA 230V 50Hz / B 11

12 10255 General Drive Unit A6 ORLANDO, FL USA Tel: (407) Fax: (407) info@airstar-light.us / B 12

Booster Pump PB4-60 Replacement Kits

Booster Pump PB4-60 Replacement Kits Booster Pump PB4-60 Replacement Kits FOR YOUR SAFETY - This product must be installed and serviced by a contractor who is licensed and qualified in pool equipment by the jurisdiction in which the product

More information

3/8" Dr. Air Butterfly Impact Wrench

3/8 Dr. Air Butterfly Impact Wrench 8192106 3/8" Dr. Air Butterfly Impact Wrench Owner s Manual Read and understand all instructions before use. Retain this manual for future reference. Specifications Construction: Polished aluminum and

More information

AC1810 / AC1810-A TECHNICAL SPECIFICATIONS. Operating Pressure psi ( kgs/cm²) [AC1810] Displacement. Net Weight

AC1810 / AC1810-A TECHNICAL SPECIFICATIONS. Operating Pressure psi ( kgs/cm²) [AC1810] Displacement. Net Weight Technical Specifications Operating Instructions Maintenance Information Troubleshooting Guide Parts Diagrams AC1810 / AC1810-A THE EVOLUTION OF PERFECTION CAUTION: Before attempting to use or service this

More information

OWNER S MANUAL. Page: 1 of 8

OWNER S MANUAL. Page: 1 of 8 Air Needle Scaler OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal

More information

SETTING THE HANDLE HEIGHT ON THE ROLLATOR

SETTING THE HANDLE HEIGHT ON THE ROLLATOR Model No: Maximum User Weight: 10910C (Lightweight) 10928C (Heavy duty) 125kg (20st) (Lightweight) 170kg (27st) (Heavy duty) Height of handles: 780-915mm (30.5-36 ) (Lightweight) 790-930mm (31-36.5 ) (Heavy

More information

12V AIR STATION ALL-IN-ONE

12V AIR STATION ALL-IN-ONE [ACT 027] Manual E 6/9/05 10:18 PM Page 3 Multi use 12V AIR STATION ALL-IN-ONE OWNER S MANUAL MODEL NO: C71A-54 KEEP THE ORIGINAL BOX, PACKAGING AND RECEIPT. BEFORE OPERATING THIS UNIT, READ THE MANUAL

More information

1 DRIVE INDUSTRIAL IMPACT WRENCH

1 DRIVE INDUSTRIAL IMPACT WRENCH 1 DRIVE INDUSTRIAL IMPACT WRENCH 92622 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight

More information

Pressure Dump Valve Service Kit for Series 3000 Units

Pressure Dump Valve Service Kit for Series 3000 Units Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator

More information

PROPORTIONING VALVE. Model 150 INSTRUCTION MANUAL. March 2017 IMS Company Stafford Road

PROPORTIONING VALVE. Model 150 INSTRUCTION MANUAL. March 2017 IMS Company Stafford Road PROPORTIONING VALVE Model 150 INSTRUCTION MANUAL March 2017 IMS Company 10373 Stafford Road Telephone: (440) 543-1615 Fax: (440) 543-1069 Email: sales@imscompany.com 1 Introduction IMS Company reserves

More information

Installation Instructions Air Compressor Part # 2780, 2781

Installation Instructions Air Compressor Part # 2780, 2781 Note: It is essential that the operator of this product read and understand the contents of this manual before installing and using this product. Parts Included Qty Parts Included Qty Compressor 1 Coil

More information

AIR COMPRESSOR. Failure to follow all instructions as listed below may result in electrical shock, fire, and/or serious personal injury.

AIR COMPRESSOR. Failure to follow all instructions as listed below may result in electrical shock, fire, and/or serious personal injury. 2 GALLON AIR COMPRESSOR Model: 7517 DO NOT RETURN TO STORE. Please CALL 800-348-5004 for parts and service. CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials

More information

Pressure Dump Valve Service Kit for Series 2300 Units

Pressure Dump Valve Service Kit for Series 2300 Units Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit

More information

[ACT 005] Manual E 5/25/05 9:24 PM Page 3 MULTI-FUNCTION

[ACT 005] Manual E 5/25/05 9:24 PM Page 3 MULTI-FUNCTION [ACT 005] Manual E 5/25/05 9:24 PM Page 3 MULTI-FUNCTION Air Compressor OWNER S MANUAL MODEL NO: RCP-C62A KEEP THE ORIGINAL BOX, PACKAGING AND RECEIPT. BEFORE OPERATING THIS UNIT, READ THE MANUAL THOROUGHLY

More information

OPERATION MANUAL DMI 16-LIGHT LIGHT TOWER ALSO AVAILABLE ONLINE AT DMI-LT.COM

OPERATION MANUAL DMI 16-LIGHT LIGHT TOWER ALSO AVAILABLE ONLINE AT DMI-LT.COM OPERATION MANUAL DMI 16-LIGHT LIGHT TOWER ALSO AVAILABLE ONLINE AT DMI-LT.COM 1 You have purchased a very high quality piece of equipment that should provide years of useful life. Following the instructions

More information

OPERATION MANUAL Please read this Operation Manual carefully before use, and file for future reference.

OPERATION MANUAL Please read this Operation Manual carefully before use, and file for future reference. English Lubrication Free Air Turbine Handpiece with Water Spray OPERATION MANUAL Please read this Operation Manual carefully before use, and file for future reference. OM-T0286E 001 Thank you for purchasing

More information

User Instruction Manual For Davit Rescue System

User Instruction Manual For Davit Rescue System Instructions for the following series products: Rescue Davit System Model numbers 8004000 and 8302500 User Instruction Manual For Davit Rescue System This manual should be used as part of an employee training

More information

Everyday INFLATION STATION CORDLESS

Everyday INFLATION STATION CORDLESS [ACT 050] Manual E 3/30/06 9:43 AM Page 3 Everyday INFLATION STATION CORDLESS OWNER S MANUAL MODEL NO: W03A-54 KEEP THE ORIGINAL BOX, PACKAGING AND RECEIPT. BEFORE OPERATING THIS UNIT, READ THE MANUAL

More information

Model VR6 System. Installation, Operation & Maintenance

Model VR6 System. Installation, Operation & Maintenance Model VR6 System Installation, Operation & Maintenance General: All Archer Instruments chlorination systems are carefully designed and tested for years of safe, accurate field service. All Archer Instruments

More information

INTENDED USE TECHNICAL SPECIFICATIONS

INTENDED USE TECHNICAL SPECIFICATIONS 1/2IN. HEAVY-DUTY AIR IMPACT WRENCH OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result

More information

INFLATION STATION. Cordless OWNER S MANUAL MODEL NO: RCP-C65B

INFLATION STATION. Cordless OWNER S MANUAL MODEL NO: RCP-C65B [ACT 050] Manual E 4/4/06 4:34 PM Page 1 Cordless INFLATION STATION OWNER S MANUAL MODEL NO: RCP-C65B KEEP THE ORIGINAL BOX, PACKAGING AND RECEIPT. BEFORE OPERATING THIS UNIT, READ THE MANUAL THOROUGHLY

More information

10 DRIP NOZZLE WATERING DRIP KIT Model / Model 46095

10 DRIP NOZZLE WATERING DRIP KIT Model / Model 46095 10 DRIP NOZZLE WATERING DRIP KIT Model 93261 / Model ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission

More information

PETERSEN 161-SERIES HIGH PRESSURE LIFTING AIR BAGS OPERATING INSTRUCTIONS WARNING!

PETERSEN 161-SERIES HIGH PRESSURE LIFTING AIR BAGS OPERATING INSTRUCTIONS WARNING! PETERSEN 161-SERIES HIGH PRESSURE LIFTING AIR BAGS OPERATING INSTRUCTIONS WARNING! Read and understand instructions before using Petersen Plugs. Failure to comply may result in property damage, serious

More information

JACKSON GRILLS PATIO FIRE

JACKSON GRILLS PATIO FIRE PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE JACKSON GRILLS PATIO FIRE Tested by: Tested to: ANSI Z21.97-2010 & CSA CAN 1-2.21-M85 WARNING: For Outdoor Use Only. WARNING: If the information in this

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

GENUINE CARGO NET INSTALLATION AND USER S INSTRUCTIONS

GENUINE CARGO NET INSTALLATION AND USER S INSTRUCTIONS GENUINE CARGO NET INSTALLATION AND USER S INSTRUCTIONS Thank you for purchasing a genuine Mazda accessory. Before removal and installation, be sure to thoroughly read these instructions. Please read the

More information

400H HARDMOUNT AIR COMPRESSOR KIT PART NO H HARDMOUNT AIR COMPRESSOR KIT PART NO

400H HARDMOUNT AIR COMPRESSOR KIT PART NO H HARDMOUNT AIR COMPRESSOR KIT PART NO 400H HARDMOUNT AIR COMPRESSOR KIT PART NO. 40042 450H HARDMOUNT AIR COMPRESSOR KIT PART NO. 45042 400H 450H IMPORTANT: It is essential that you and any other operator of this product read and understand

More information

SETUP GBW/GBWE SETUP. upper or lower position. Placing the lock in the upper position will provide 1 foot (305 mm) more height.

SETUP GBW/GBWE SETUP. upper or lower position. Placing the lock in the upper position will provide 1 foot (305 mm) more height. SETUP GBW/GBWE SETUP Set the GBW on a fi rm level surface where there is enough space around the pentapod for the outriggers to be deployed. Remove the pentapod from the carrying case. The pentapod outriggers

More information

KTM OM-2 SPLIT BODY FLOATING BALL VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS

KTM OM-2 SPLIT BODY FLOATING BALL VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS Before installation these instructions must be fully read and understood SECTION 1 - STORAGE 1.1 Preparation and preservation for storage All valves should be properly packed in order to protect the parts

More information

InstallatIon and owner s InstrUCtIons

InstallatIon and owner s InstrUCtIons InstallatIon and owner s InstrUCtIons Wall Mount Series Adjustable and Fixed Height Goal Systems table of Contents Safety Instructions... 2 Goal Specifications... 3 Frame Attachment... 4 Frame Assembly

More information

DM-RARD (English) Dealer's Manual. ROAD MTB Trekking. City Touring/ Comfort Bike. Rear Derailleur DURA-ACE RD-R9100 ULTEGRA RD-R8000

DM-RARD (English) Dealer's Manual. ROAD MTB Trekking. City Touring/ Comfort Bike. Rear Derailleur DURA-ACE RD-R9100 ULTEGRA RD-R8000 (English) DM-RARD001-03 Dealer's Manual ROAD MTB Trekking City Touring/ Comfort Bike URBAN SPORT E-BIKE Rear Derailleur DURA-ACE RD-R9100 ULTEGRA RD-R8000 CONTENTS IMPORTANT NOTICE... 3 TO ENSURE SAFETY...

More information

SERVICE & MAINTENANCE MANUAL FOR:

SERVICE & MAINTENANCE MANUAL FOR: SERVICE & MAINTENANCE MANUAL FOR: Tube Arch by: 2880 Interstate Parkway Brunswick, OH 44212 PH: 330-273.3200 Fax: 330-273-3212 Scherba Industries, Inc. 2011 Tube Arch INTRODUCTION INTRODUCTION To the owner:

More information

MODEL NUMBER: PSI AIR SOURCE KIT 200 PSI Compressor on 2.0 Gallon 200 PSI Air Tank

MODEL NUMBER: PSI AIR SOURCE KIT 200 PSI Compressor on 2.0 Gallon 200 PSI Air Tank IMPORTANT SAFETY INSTRUCTIONS CAUTION - To reduce risk of electrical shock or Electrocution: MODEL NUMBER: 20008 200 PSI AIR SOURCE KIT 200 PSI Compressor on 2.0 Gallon 200 PSI Air Tank IMPORTANT: It is

More information

OPERATING and MAINTENANCE INSTRUCTIONS MAXIS 6K Puller (M6K-M)

OPERATING and MAINTENANCE INSTRUCTIONS MAXIS 6K Puller (M6K-M) OPERATING and MAINTENANCE INSTRUCTIONS MAXIS 6K Puller (M6K-M) READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND SAFETY INFORMATION IN THIS MANUAL BEFORE OPERATING OR 04/17 (M6K-M) SERVICING THIS TOOL TABLE

More information

AIR INLINE METAL SHEAR

AIR INLINE METAL SHEAR AIR INLINE METAL SHEAR ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd. / Camarillo, CA 93011 Copyright 1997 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork

More information

Cocoa Patio Pond with Lit Spillway

Cocoa Patio Pond with Lit Spillway Cocoa Patio Pond with Lit Spillway REMINDER CALL 1-888-755-5641 BEFORE RETURNING TO STORE. PACKAGE CONTENTS ITEM # GQSPPB/GQSPPW Questions, problems, missing parts? Before returning to your retailer, call

More information

SPECIFICATIONS Type: Twin stack, single phase Tank: 4 gallon Air Output: PSI; PSI Max PSI: 125 PSI HP: 1.

SPECIFICATIONS Type: Twin stack, single phase Tank: 4 gallon Air Output: PSI; PSI Max PSI: 125 PSI HP: 1. 2 GALLON TWIN STACK AIR COMPRESSOR Model: 9526 DO NOT RETURN TO STORE. Please CALL 800-348-5004 for parts and service. CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or

More information

LUBRICATOR ASSEMBLY AND OPERATING INSTRUCTIONS

LUBRICATOR ASSEMBLY AND OPERATING INSTRUCTIONS AIR FILTER, REGULATOR AND LUBRICATOR 4035 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 004 by Harbor Freight

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Model No. Description RP2300FC, RP2301FC Router CONCEPT AND MAIN APPLICATIONS Models RP2300FC and RP2301FC are upgraded sister tools of our current plunge-type electronic router Model

More information

TEM# Air Hammer Combo USER'S MANUAL

TEM# Air Hammer Combo USER'S MANUAL Air Tools TEM# 40 Air Hammer Combo USER'S MANUAL Read carefully and understand RULES FOR SAFE OPERATION and instructions before operating. Failure to follow the safety rules and other basic safety precautions

More information

BMR 2100XL Operating Instructions Page 1 of 13

BMR 2100XL Operating Instructions Page 1 of 13 BMR 2100XL Operating Instructions Page 1 of 13 Thank you for deciding to purchase a Swisswing BMR 2100XL (Biomechanical Stimulation Device will be referred to in these operating instructions as the BMR).

More information

Model PSI Compressor with 3-Gallon Air Tank 12VDC

Model PSI Compressor with 3-Gallon Air Tank 12VDC Model 6350 150 PSI Compressor with 3-Gallon Air Tank 12VDC IMPORTANT: It is essential that you and any other operator of this product read and understandd the contents of this manual before installing

More information

C - SERIES. Height Adjustable Portable Goal Supports. Installation & Owner s Instructions C1000 C2000. Made in the USA

C - SERIES. Height Adjustable Portable Goal Supports. Installation & Owner s Instructions C1000 C2000. Made in the USA C - SERIES Height Adjustable Portable Goal Supports C1000 C2000 Installation & Owner s Instructions Made in the USA This manual explains the proper installation, operation, and maintenance of your Schutt

More information

Med Aire Alternating Pressure Pump and Pad System

Med Aire Alternating Pressure Pump and Pad System User Manual Med Aire Alternating Pressure Pump and Pad System 14002E 14001E Symbols & Statements NOTE Indicates some tips or some information users should be aware of. CAUTION Indicates correct operating

More information

PORTABLE WORK LIGHT MODEL NO: CL6FS OPERATION INSTRUCTIONS PART NO: GC0315

PORTABLE WORK LIGHT MODEL NO: CL6FS OPERATION INSTRUCTIONS PART NO: GC0315 PORTABLE WORK LIGHT MODEL NO: CL6FS PART NO: 4003530 OPERATION INSTRUCTIONS GC0315 INTRODUCTION Thank you for purchasing this CLARKE Worklight. Before attempting to use this product, please read this manual

More information

OPERATING and MAINTENANCE INSTRUCTIONS MAXIS 3K Puller (M3K-M)

OPERATING and MAINTENANCE INSTRUCTIONS MAXIS 3K Puller (M3K-M) OPERATING and MAINTENANCE INSTRUCTIONS MAXIS 3K Puller (M3K-M) 04/17 (M3K-M) READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND SAFETY INFORMATION IN THIS MANUAL BEFORE OPERATING OR SERVICING THIS TOOL TABLE

More information

USER GUIDE ROLLING WALKERS INSTRUCTIONS FOR USE JANUARY, Maximum User Weight: 170kg (Do not exceed this weight)

USER GUIDE ROLLING WALKERS INSTRUCTIONS FOR USE JANUARY, Maximum User Weight: 170kg (Do not exceed this weight) USER GUIDE ROLLING WALKERS INSTRUCTIONS FOR USE JANUARY, 2013 Model Nos: BE07889T Maximum User Weight: 170kg (Do not exceed this weight) Model Nos: BE07890TB Maximum User Weight: 227kg (Do not exceed this

More information

Pectoral Machine. User manual E S S E N T I A L S T R E N G T H

Pectoral Machine. User manual E S S E N T I A L S T R E N G T H E L E M E N T and the cable E S S E N T I A L S T R E N G T H User manual 1 and the cable and The identification plate of and manufacturer, affixed on the back panel of the weight stack, gives the following

More information

2000 lb manual winch

2000 lb manual winch 2000 lb manual winch Model 41694 Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA 93011

More information

Right-Angle Tube Roller Model

Right-Angle Tube Roller Model SPECIFICATIONS Model no. Free Speed (RPM) Throttle Rotation Max. Torque Ft-Lb Air Pressure psi Air Inlet Hose Air Flow @Free Speed Spindle Weight 909-1700 95 Lever type Reversible 240 90 1/2 NPT 1/2 I.D.

More information

Item N o.: Item N am e:40cm Boys Rival Bike

Item N o.: Item N am e:40cm Boys Rival Bike Item N o.:42272892 Item N am e:40cm Boys Rival Bike 9 bell 8 grip 30 crash pad 10 brake lever 26 wheel reflector 22 saddle 23 seat post 25 rear reflector 24 quick release 6 handle bar 7 stem 2 top tube

More information

Sunbrite LTC Large Underwater Pool Lights

Sunbrite LTC Large Underwater Pool Lights Sunbrite LTC Large Underwater Pool Lights O W N E R S M A N U A L 3050 0997 ASB INSTALLATION, OPERATION & PARTS This manual should be furnished to the end user of this light; its use will reduce service

More information

Differential Pressure Regulator Type Type 45-6 (0.1 to 1 bar, DN 15) Mounting and Operating Instructions EB 3226 EN

Differential Pressure Regulator Type Type 45-6 (0.1 to 1 bar, DN 15) Mounting and Operating Instructions EB 3226 EN Differential Pressure Regulator Type 45-6 Type 45-6 (0.1 to 1 bar, DN 15) Mounting and Operating Instructions EB 3226 EN Edition March 2008 Contents Contents Page 1 Design and principle of operation...................

More information

Final Assembly Instructions Bikes with Quill Stems

Final Assembly Instructions Bikes with Quill Stems Final Assembly Instructions Bikes with Quill Stems Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final assembly. Prior to shipping, our expert

More information

44in Side Discharge Mower for Wheel Horse XL 440H Lawn Tractors Model No Serial No and Up

44in Side Discharge Mower for Wheel Horse XL 440H Lawn Tractors Model No Serial No and Up Form No. 5-8 in Side Discharge Mower for Wheel Horse XL 0H Lawn Tractors Model No. 790 Serial No. 5000000 and Up Operator s Manual Register your product at www.toro.com Original Instructions (EN) Contents

More information

DBI SALA Confined Space Rescue Davit System

DBI SALA Confined Space Rescue Davit System Instructions for the following series products: Rescue Davit System (See back page for specific model numbers.) User Instruction Manual For Davit Rescue System This manual should be used as part of an

More information

CONGRATULATIONS ON YOUR PURCHASE OF YOUR THUNDER COMPRESSOR For your personal safety please read, understand and follow the information provided in

CONGRATULATIONS ON YOUR PURCHASE OF YOUR THUNDER COMPRESSOR For your personal safety please read, understand and follow the information provided in CONGRATULATIONS ON YOUR PURCHASE OF YOUR THUNDER COMPRESSOR For your personal safety please read, understand and follow the information provided in this instruction manual. 1 CONTENTS 3. Safety Precautions

More information

Instruction Manual LIMITED 1 YEAR WARRANTY. Hydraulic Punch Driver Read this material before using this product.

Instruction Manual LIMITED 1 YEAR WARRANTY. Hydraulic Punch Driver Read this material before using this product. Instruction Manual Hydraulic Punch Driver 902-483 LIMITED 1 YEAR WARRANTY We make every effort to assure that its products meet high quality and durability standards, and warrant to the original purchaser

More information

MODEL NUMBER: M20005 AIR SOURCE KIT. 30% Duty Compressor on. 2.0 Gallon Air Tank SAVE THIS MANUAL FOR FUTURE REFERENCE

MODEL NUMBER: M20005 AIR SOURCE KIT. 30% Duty Compressor on. 2.0 Gallon Air Tank SAVE THIS MANUAL FOR FUTURE REFERENCE MODEL NUMBER: M20005 AIR SOURCE KIT 30% Duty Compressor on 2.0 Gallon Air Tank SAVE THIS MANUAL FOR FUTURE REFERENCE USER MANUAL IMPORTANT SAFETY INSTRUCTIONS CAUTION - To reduce risk of electrical shock

More information

8MAY15 US RACK, Inc Falcon Drive, Madera, CA

8MAY15 US RACK, Inc Falcon Drive, Madera, CA 8MAY15 US RACK, Inc. - 2850 Falcon Drive, Madera, CA 93637-559-661-3050 INSTRUCTIONS for Bedrail-mounted MOTORCYCLE RACK, Model 2001-4TRA WARNING: Do NOT attempt to install or use this rack without following

More information

MODEL SWH10 1,000 LB CAPACITY SWIVEL HOIST

MODEL SWH10 1,000 LB CAPACITY SWIVEL HOIST MODEL SWH10 1,000 LB CAPACITY SWIVEL HOIST PARTS BREAKDOWN AND OPERATING MANUAL Copyright 2007, Arcan Professional Tools Rev: 05/15/07 This operating manual contains important safety information. Read

More information

BRAKE WINCH RUP 503-[T/BT] EQUIPMENT FOR LIFTING LOADS. AT 053-[T/BT] xx

BRAKE WINCH RUP 503-[T/BT] EQUIPMENT FOR LIFTING LOADS. AT 053-[T/BT] xx Reference number: BRAKE WINCH RUP 503-[T/BT] EQUIPMENT FOR LIFTING LOADS DESIGNATED USE The brake winch RUP 503-[...]T series is a load lifting / lowering device. Device is equipped with safety brake for

More information

444C DUAL PERFORMANCE VALUE PACK

444C DUAL PERFORMANCE VALUE PACK (Chrome) PART NO. 44432 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before installing and using this product. SAVE THIS MANUAL

More information

Techcon Systems TS1258 Pressure Pot

Techcon Systems TS1258 Pressure Pot Techcon Systems TS1258 Pressure Pot User Guide TABLE OF CONTENT 1. SAFETY. 3 1.1 Intended Use 3 1.2 Safety Precaution 3 2. CERTIFICATE OF COMFORMANCE 4 3. FEATURES. 5 4. SPECIFICATIONS 5 5. INSTALLATION

More information

SPECIFICATIONS TABLE Maximum Air Pressure 115 PSI Air Tank Capacity 20 Gallons

SPECIFICATIONS TABLE Maximum Air Pressure 115 PSI Air Tank Capacity 20 Gallons SPECIFICATIONS TABLE Maximum Air Pressure 115 PSI Air Tank Capacity 20 Gallons Air Flow Capacity 6.2 CFM at 40 PSI 5.2 CFM at 90 PSI Motor 2.5 HP Working / 4 HP Peak 120 Volt / 60 Hz / 13 A / 1-Phase Required

More information

RS(H)10,15 USER MANUAL. Read the complete manual before installing and using the regulator.

RS(H)10,15 USER MANUAL. Read the complete manual before installing and using the regulator. RS(H)10,15 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to

More information

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS CAUTION - To reduce risk of electrical shock: - Do not disassemble. Do not attempt repairs or modifications. Refer to qualified service agencies for all service and repairs.

More information

Standard Operating Manual

Standard Operating Manual Standard Operating Manual AB-M Mask Aligner Version 1.1 Page 1 of 18 Contents 1. Picture and Location 2. Process Capabilities 2.1 Cleanliness Standard 2.2 Wafer Chuck Selection 2.3 Mask Holder Selection

More information

200 PSI FAST-FILL AIR SOURCE KIT

200 PSI FAST-FILL AIR SOURCE KIT 200 PSI FAST-FILL AIR SOURCE KIT 55% Duty Compressor on 2.0 Gallon Air Tank PART NO. 20007 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of

More information

DM-RD (English) Dealer s Manual. ROAD Rear Derailleur RD-9000 RD-6800 RD-5800 RD-4700

DM-RD (English) Dealer s Manual. ROAD Rear Derailleur RD-9000 RD-6800 RD-5800 RD-4700 (English) DM-RD0003-09 ROAD Rear Derailleur Dealer s Manual RD-9000 RD-6800 RD-5800 RD-4700 CONTENTS IMPORTANT NOTICE...3 TO ENSURE SAFETY...4 LIST OF TOOLS TO BE USED...6 INSTALLATION...8 Chain length...

More information

INSTRUCTION MANUAL MST AFTERCOOLER SYSTEM MODEL

INSTRUCTION MANUAL MST AFTERCOOLER SYSTEM MODEL INSTRUCTION MANUAL MST AFTERCOOLER SYSTEM MODEL 8059601 To be used with MST Model 8050501 Ambient Air Pump 7/12/05 2 TABLE OF CONTENTS GENERAL INFORMATION... 3 WARNING...4,5 UNPACKING AND AFTERCOOLER ASSEMBLY

More information

DuPont Personal Protection Instruction Manual for Universal Pressure Test Kit No

DuPont Personal Protection Instruction Manual for Universal Pressure Test Kit No DuPont Personal Protection Instruction Manual for Universal Pressure Test Kit No. 990810 Effective: October 2006 BE SURE TO READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE ATTEMPTING TO PERFORM AN INFLATION

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Models No. TD0101, TD0101F Description Impact Driver L PRODUCT P 1/ 14 CONCEPT AND MAIN APPLICATIONS Models TD0101 and TD0101F are cost-competitive 100N.m-class impact driver developed

More information

Combination Breathing Apparatus

Combination Breathing Apparatus and Combination Breathing Apparatus ULTRAVUE FACEPIECE TAL 502 (L) Rev. 0 MSA 2005 Prnt. Spec. 10000005389 (I) Mat. 10064385 Doc. 10064385 ULTRAVUE FACEPIECE COMPONENTS Item Part No. Description 800509

More information

AIR/OVER HYDRAULIC JACK 20 TON

AIR/OVER HYDRAULIC JACK 20 TON AIR/OVER HYDRAULIC JACK 0 TON 4487 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 999 by Harbor Freight Tools.

More information

Important Note: Tighten lock nuts so the support tubes still swing freely see figure 2. There must be 1 2 threads of bolt past end of lock nuts.

Important Note: Tighten lock nuts so the support tubes still swing freely see figure 2. There must be 1 2 threads of bolt past end of lock nuts. Kit Contents: DESCRIPTION QTY. DESCRIPTION QTY. 2 Shank Assembly 1 Support Tube Assembly 1 Side Tube - Short 2 1-1/4 Shank 1 Center Tube - Long 1 3/8-16 x 2.0 Carriage Bolt 2 5/16-18 x 2.25 Carriage Bolt

More information

RIV991 PNEUMATIC PUNCHING TOOL FOR HEXAGONAL HOLES OPERATING INSTRUCTIONS

RIV991 PNEUMATIC PUNCHING TOOL FOR HEXAGONAL HOLES OPERATING INSTRUCTIONS RIV991 PNEUMATIC PUNCHING TOOL FOR HEXAGONAL HOLES OPERATING INSTRUCTIONS GENERAL INFORMATION ASSISTANCE In case you need any assistance concerning the use and the maintenance of the tool, or in case you

More information

450P- RV AUTOMATIC PORTABLE COMPRESSOR EXTREME SERIES

450P- RV AUTOMATIC PORTABLE COMPRESSOR EXTREME SERIES 450P- RV AUTOMATIC PORTABLE COMPRESSOR EXTREME SERIES PART NO. 45053 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before installing

More information

DM-MBRD (English) Dealer's Manual. ROAD MTB Trekking. City Touring/ Comfort Bike. Rear Derailleur SLX RD-M7000 DEORE RD-M6000

DM-MBRD (English) Dealer's Manual. ROAD MTB Trekking. City Touring/ Comfort Bike. Rear Derailleur SLX RD-M7000 DEORE RD-M6000 (English) DM-MBRD001-04 Dealer's Manual ROAD MTB Trekking City Touring/ Comfort Bike URBAN SPORT E-BIKE Rear Derailleur SLX RD-M7000 DEORE RD-M6000 CONTENTS IMPORTANT NOTICE... 3 TO ENSURE SAFETY... 4

More information

Flexi-pro Aerosol Delivery System (FADS) Manual

Flexi-pro Aerosol Delivery System (FADS) Manual 603-000-010 Flexi-pro Aerosol Delivery System (FADS) Manual Troubleshooting Troubleshooting Problem Solution Problem Solution About Flexi-pro Aerosol Delivery System is able to adapt to a variety of traditional

More information

GRAVITY BIKE RACK ASSEMBLY & OPERATING INSTRUCTIONS

GRAVITY BIKE RACK ASSEMBLY & OPERATING INSTRUCTIONS GRAVITY BIKE RACK 94479 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA 93011

More information

12" 8A Electric Snow Shovel

12 8A Electric Snow Shovel 12" 8A Electric Snow Shovel 2600802 Owner s Manual TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757) Read all safety rules and instructions carefully before operating this tool. CONTENTS Contents... 2...

More information

450P AUTOMATIC PORTABLE COMPRESSOR EXTREME SERIES

450P AUTOMATIC PORTABLE COMPRESSOR EXTREME SERIES EXTREME SERIES PART NO. 45043 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before installing and using this product. SAVE THIS

More information

2 GALLON TWIN STACK AIR COMPRESSOR W/ HOSE REEL

2 GALLON TWIN STACK AIR COMPRESSOR W/ HOSE REEL 2 GALLON TWIN STACK AIR COMPRESSOR W/ HOSE REEL Model: 52024 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement,

More information

400C & 450C DUAL PERFORMANCE VALUE PACKS

400C & 450C DUAL PERFORMANCE VALUE PACKS (Chrome) PART NO. 40013 (Silver) PART NO. 45012 (Chrome) PART NO. 45013 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before

More information

Composite Pistol-Type Air Needle Scaler OWNER S MANUAL

Composite Pistol-Type Air Needle Scaler OWNER S MANUAL Composite Pistol-Type Air Needle Scaler OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may

More information

Santa Fe Cycles Assembly Guide Introduction

Santa Fe Cycles Assembly Guide Introduction Santa Fe Cycles Assembly Guide Introduction Congratulations on your purchase of your new Santa Fe bicycle. You have purchased a bicycle that has many features and qualities. Please take a few minutes and

More information

Falcon 3 145, 170, 195 and Tandem Owner / Service Manual

Falcon 3 145, 170, 195 and Tandem Owner / Service Manual Falcon 3 145, 170, 195 and Tandem Owner / Service Manual January 2007 - Second Edition Removing The Sail From The Airframe And Short Packing The Glider Many maintenance and repair procedures will require

More information

deluxe toilet safety support

deluxe toilet safety support deluxe toilet safety support Model 97388 Cleaning, Assembly, And Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ

More information

200 PSI COMPRESSORS - MODEL NUMBERS

200 PSI COMPRESSORS - MODEL NUMBERS 200 PSI COMPRESSORS - MODEL NUMBERS 380C AIR COMPRESSOR KIT PART NO. 38033 480C AIR COMPRESSOR KIT PART NO. 48043 380C 480C IMPORTANT: It is essential that you and any other operator of this product read

More information

Preparation and Installation of the Sanitary BDI-FLX Sensor and Connection to the BDI-FLX Interface Cable

Preparation and Installation of the Sanitary BDI-FLX Sensor and Connection to the BDI-FLX Interface Cable GEP-6075 Rev. B 101574 Ref. I.D.: 16973 Preparation and Installation of the Sanitary BDI-FLX Sensor and Connection to the BDI-FLX Interface Cable WARNING USER SHOULD READ AND THOROUGHLY UNDERSTAND THESE

More information

Instruction Sheet. CP2000: 2000 lb Cable Puller IMPORTANT RECEIVING INSTRUCTIONS SAFETY ISSUES

Instruction Sheet. CP2000: 2000 lb Cable Puller IMPORTANT RECEIVING INSTRUCTIONS SAFETY ISSUES Instruction Sheet CP2000: 2000 lb Cable Puller RPS-0148 07/02 IMPORTANT RECEIVING INSTRUCTIONS Visually inspect all components for shipping damage. If shipping damage is found, notify carrier at once.

More information

Assembling & Installing your Pool Cleaner

Assembling & Installing your Pool Cleaner Assembling & Installing your Pool Cleaner STEP 1: Check Contents of the Box Remove the Badu Clean Supreme body and all parts from the box and check that the following components are included. Refer to

More information

275 RID Assembly Instructions

275 RID Assembly Instructions 75 RID Assembly Instructions Part No. 0003003 v. Lscsep0 PARTS LIST (Specifications and contents subject to change without notice) Description Part # A. RID Track...0000050 B. Capacity Plate...0053 C.

More information

Operator: Save these instructions for future use!

Operator: Save these instructions for future use! WHITE-RODGERS Type 36C67 Combination (24 Volt Models) INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING

More information

Inflatable Acoustical Shell

Inflatable Acoustical Shell Owner s Manual Inflatable coustical Shell CONTENTS Safety Precautions.............................2 Set Up and Usage.........................2 Stability..................................3 Fire Hazard...............................3

More information

97C COMPRESSOR KIT 12V PART NO C COMPRESSOR KIT 24V PART NO C COMPRESSOR KIT PART NO

97C COMPRESSOR KIT 12V PART NO C COMPRESSOR KIT 24V PART NO C COMPRESSOR KIT PART NO 97C COMPRESSOR KIT 12V PART NO. 00097 97C COMPRESSOR KIT 24V PART NO. 02497 98C COMPRESSOR KIT PART NO. 00098 97C 98C IMPORTANT: It is essential that you and any other operator of this product read and

More information

420C AIR COMPRESSOR KIT PART NO C AIR COMPRESSOR KIT PART NO

420C AIR COMPRESSOR KIT PART NO C AIR COMPRESSOR KIT PART NO 420C AIR COMPRESSOR KIT PART NO. 42042 460C AIR COMPRESSOR KIT PART NO. 46043 420C 460C IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this

More information

Installation and Maintenance Manual. ECO Filtration Unit with 6-way-Top-Mount-Valve. Art. Nr

Installation and Maintenance Manual. ECO Filtration Unit with 6-way-Top-Mount-Valve. Art. Nr Installation and Maintenance Manual ECO Filtration Unit with 6-way-Top-Mount-Valve Art. Nr. 300100 300101 300102 Important Details: - Using of this filtration unit for swimming pools and its guard band

More information

35 TON HYDRAULIC PUNCH WARNING

35 TON HYDRAULIC PUNCH WARNING OPERATORS GUIDE REL-35T-PNC 35 TON HYDRAULIC PUNCH NOTICE Sizes, weights and tool specifications listed in this manual are subject to change without notice. Please consult factory for information and updates.

More information

200 PSI HIGH-FLOW AIR SOURCE KIT

200 PSI HIGH-FLOW AIR SOURCE KIT 200 PSI HIGH-FLOW AIR SOURCE KIT 50% Duty Compressor on 2.0 Gallon Air Tank PART NO. 20008 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of

More information