Type MMV Medium Power Cable

Transcription

1

2 7-05 Type MMV Medium Power Cable Single Conductor: 5kV 5kV, 00% & % Insulation Levels. Rated 90 C Multi-Conductor: 5kV 5kV, 00% & % Insulation Levels. Rated 90 C Conductors Soft annealed flexible stranded tinned copper per IEEE 50 Table. Insulation Extruded thermosetting 90 C Ethylene Propylene Rubber (EPR), meeting UL 09 (Type E), IEEE 50 (Type E) and UL 07. Metallic Shield Composite shield consisting of 0.0" tinned copper braided with nylon providing 0% copper Shielded coverage meeting UL 09, IEEE Std. 50 and UL 07. The nylon is colored for easy phase identification (three conductor = black, blue, red) without the need to remove the shield to find an underlying colored tape. Ratings & Approvals UL Listed as Marine Shipboard Cable (E) American Bureau of Shipping (ABS) Det Norske Veritas (DNV) Pending Lloyd s Register of Shipping (LRS) Pending 90 C Temperature Rating Voltage Rating 5kV to 5kV (5kV available on request) Conductor Shield A combination of semi-conducting tape and extruded thermosetting semi-conducting material meeting UL 09, IEEE 50 and UL07. Insulation Shield Semi-conducting tape, with overlap, for fast and easy termination meeting UL 09, IEEE 50 and UL 07. Grounding Conductor (optional) One uninsulated soft annealed flexible stranded tinned copper conductor per ASTM B and sized according to Table. of UL 07. Jacket A black, arctic grade, flame retardant, oil, abrasion, chemical and sunlight resistant thermosetting compound meeting UL 09, IEEE 50 and UL 07. Colored jackets for signifying different voltage levels are also available on special request (ie. yellow = 5kV, orange = kv and red = 5kV). Armor (optional) (Optional) 0.0" bronze braid providing % minimum coverage meeting UL 09 and IEEE Std Sheath (optional) A black, arctic grade, flame retardant, oil, abrasion, chemical, and sunlight resistant thermosetting compound meeting UL 09, IEEE 50 and UL 07. Colored jackets for signifying different voltage levels is also available on special request (ie. yellow = 5kV, orange = kv and red = 5kV). Applications Nexans AmerCable s Type MMV marine medium voltage cables are for use aboard commercial ships, mobile offshore drilling units (MODUs), and fixed or floating offshore facilities. Features n These cables utilize flexible stranded conductors, braided shields and a braided armor (when armored) which make them very suitable for applications involving repeated flexing and high vibration. n These cables have a small minimum bending radius (xod for unarmored cables and xod for armored cables) for easy installation. n Optional uninsulated grounding conductors sized per UL 07. n The increased flexibility of this cable allows for termination of one end and coiling on multiple module offshore platforms. Then coiling and terminating other end when modules are mated at sea thereby reducing installation time. n Passes IEC - Category A and IEEE 0 flame tests. Hawke Gland Types Sheathed Industrial & Safe Area (IP) 5-X Increased Safety EExe 50/ 50/5/U Explosion Proof 75 Class I, Div. Class I, Div. Class I, Zone Class I, Zone & Flameproof 50/ 50/5/U EExd Zone & ( liter or < enclosures) ICG 5/U ( liter or > enclosures) Zone & www. amercable.com marine@amercable.com

3 Inductive Voltage Inductive Voltage Single DC AC Size Part Nominal Weight Reactance Drop Nominal Weight Reactance Drop In Free Triangular Banked Resistance Resistance AWG/ No. Diameter (Lbs./ (ohms/ (Volts/amp/ Diameter (Lbs./ (ohms/ (Volts/amp/ Air Configuration in Tray at 5 C at 90 C, 0 Hz kcmil mm 7-05 (inches) 000 ft.) 000 ft.) 000 ft.) (inches) 000 ft.) 000 ft.) 000 ft.) (amps) (amps) (amps) (ohms/000 ft.) (ohms/000 ft.) /0 /0 /0 / Single Conductor Type MMV Marine Medium Voltage 5kV, 00/% Insulation Level Inductive Voltage Inductive Voltage Single DC AC Size Part Nominal Weight Reactance Drop Nominal Weight Reactance Drop In Free Triangular Banked Resistance Resistance AWG/ No. Diameter (Lbs./ (ohms/ (Volts/amp/ Diameter (Lbs./ (ohms/ (Volts/amp/ Air Configuration in Tray at 5 C at 90 C, 0 Hz kcmil mm 7-05 (inches) 000 ft.) 000 ft.) 000 ft.) (inches) 000 ft.) 000 ft.) 000 ft.) (amps) (amps) (amps) (ohms/000 ft.) (ohms/000 ft.) /0 /0 /0 / Single Conductor Type MMV Marine Medium Voltage kv, 00% Insulation Level See page for MMV Stranding Profile Manufactured by Nexans AmerCable Fax:

4 7-05 Type MMV Medium Voltage Cable Single Conductor: 5kV 5kV, 00% & % Insulation Levels. Rated 90 C Multi-Conductor: 5kV 5kV, 00% & % Insulation Levels. Rated 90 C Single Conductor Type MMV Marine Medium Voltage kv, % Insulation Level Inductive Voltage Inductive Voltage Single DC AC Size Part Nominal Weight Reactance Drop Nominal Weight Reactance Drop In Free Triangular Banked Resistance Resistance AWG/ No. Diameter (Lbs./ (ohms/ (Volts/amp/ Diameter (Lbs./ (ohms/ (Volts/amp/ Air Configuration in Tray at 5 C at 90 C, 0 Hz kcmil mm 7-05 (inches) 000 ft.) 000 ft.) 000 ft.) (inches) 000 ft.) 000 ft.) 000 ft.) (amps) (amps) (amps) (ohms/000 ft.) (ohms/000 ft.) /0 /0 /0 / www. amercable.com marine@amercable.com Single Conductor Type MMV Marine Medium Voltage 5kV, 00% Insulation Level Inductive Voltage Inductive Voltage Single DC AC Size Part Nominal Weight Reactance Drop Nominal Weight Reactance Drop In Free Triangular Banked Resistance Resistance AWG/ No. Diameter (Lbs./ (ohms/ (Volts/amp/ Diameter (Lbs./ (ohms/ (Volts/amp/ Air Configuration in Tray at 5 C at 90 C, 0 Hz kcmil mm 7-05 (inches) 000 ft.) 000 ft.) 000 ft.) (inches) 000 ft.) 000 ft.) 000 ft.) (amps) (amps) (amps) (ohms/000 ft.) (ohms/000 ft.) /0 /0 /0 / Ordering Type MMV Medium Voltage Cables Example: conductor power cable Nexans AmerCable kv 00% Type MMV Prefix # AWG ground bronze armored & sheathed BS G Specific Cable Number (from charts) Armor Requirement BS armored & sheathed Blank no armor Ground Conductor G with ground Blank no ground See page for MMV Stranding Profile

5 Single Conductor Type MMV Marine Medium Voltage 5kV, % Insulation Level Inductive Voltage Inductive Voltage Single DC AC Size Part Nominal Weight Reactance Drop Nominal Weight Reactance Drop In Free Triangular Banked Resistance Resistance AWG/ No. Diameter (Lbs./ (ohms/ (Volts/amp/ Diameter (Lbs./ (ohms/ (Volts/amp/ Air Configuration in Tray at 5 C at 90 C, 0 Hz kcmil mm 7-05 (inches) 000 ft.) 000 ft.) 000 ft.) (inches) 000 ft.) 000 ft.) 000 ft.) (amps) (amps) (amps) (ohms/000 ft.) (ohms/000 ft.) /0 /0 /0 / Three Conductor Type MMV Marine Medium Voltage 5kV, 00/% Insulation Level Single Inductive Size Nominal Weight Nominal Weight In Free Banked DC Resistance AC Resistance Reactance Voltage Drop Optional AWG/ Part No. Diameter (Lbs./ Diameter (Lbs./ Air in Trays at 5 C at 90 C, 0Hz (ohms/ (Volts per amp Grounding kcmil mm 7-05 (inches) 000 ft.) (inches) 000 ft.) (amps) (amps) (ohms/000 ft.) (ohms/000 ft.) 000 ft.) per 000 ft.) Conductor /0 /0 /0 / / See page for MMV Stranding Profile Manufactured by Nexans AmerCable Fax:

6 7-05 Type MMV Medium Voltage Cable Single Conductor: 5kV 5kV, 00% & % Insulation Levels. Rated 90 C Multi-Conductor: 5kV 5kV, 00% & % Insulation Levels. Rated 90 C Three Conductor Type MMV Marine Medium Voltage kv, 00% Insulation Level Single Inductive Size Nominal Weight Nominal Weight In Free Banked DC Resistance AC Resistance Reactance Voltage Drop Optional AWG/ Part No. Diameter (Lbs./ Diameter (Lbs./ Air in Trays at 5 C at 90 C, 0Hz (ohms/ (Volts per amp Grounding kcmil mm 7-05 (inches) 000 ft.) (inches) 000 ft.) (amps) (amps) (ohms/000 ft.) (ohms/000 ft.) 000 ft.) per 000 ft.) Conductor /0 /0 /0 / Single Inductive Size Nominal Weight Nominal Weight In Free Banked DC Resistance AC Resistance Reactance Voltage Drop Optional AWG/ Part No. Diameter (Lbs./ Diameter (Lbs./ Air in Trays at 5 C at 90 C, 0Hz (ohms/ (Volts per amp Grounding kcmil mm 7-05 (inches) 000 ft.) (inches) 000 ft.) (amps) (amps) (ohms/000 ft.) (ohms/000 ft.) 000 ft.) per 000 ft.) Conductor /0 /0 /0 / Three Conductor Type MMV Marine Medium Voltage kv, % Insulation Level /0 See page for MMV Stranding Profile Ordering Type MMV Medium Voltage Cables Example: conductor power cable Nexans AmerCable kv 00% Type MMV Prefix # AWG ground bronze armored & sheathed BS G Specific Cable Number (from charts) Armor Requirement BS armored & sheathed Blank no armor www. amercable.com marine@amercable.com Ground Conductor G with ground Blank no ground

7 Three Conductor Type MMV Marine Medium Voltage 5kV, 00% Insulation Level Single Inductive Size Nominal Weight Nominal Weight In Free Banked DC Resistance AC Resistance Reactance Voltage Drop Optional AWG/ Part No. Diameter (Lbs./ Diameter (Lbs./ Air in Trays at 5 C at 90 C, 0Hz (ohms/ (Volts per amp Grounding kcmil mm 7-05 (inches) 000 ft.) (inches 000 ft.) (amps) (amps) (ohms/000 ft.) (ohms/000 ft.) 000 ft.) per 000 ft.) Conductor /0 /0 /0 / Single Inductive Size Nominal Weight Nominal Weight In Free Banked DC Resistance AC Resistance Reactance Voltage Drop Optional AWG/ Part No. Diameter (Lbs./ Diameter (Lbs./ Air in Trays at 5 C at 90 C, 0Hz (ohms/ (Volts per amp Grounding kcmil mm 7-05 (inches) 000 ft.) (inches) 000 ft.) (amps) (amps) (ohms/000 ft.) (ohms/000 ft.) 000 ft.) per 000 ft.) Conductor /0 /0 /0 / Three Conductor Type MMV Marine Medium Voltage 5kV, % Insulation Level See page for MMV Stranding Profile Ordering Type MMV Medium Voltage Cables Example: conductor power cable Nexans AmerCable kv 00% Type MMV Prefix # AWG ground bronze armored & sheathed BS G Specific Cable Number (from charts) Armor Requirement BS armored & sheathed Blank no armor Ground Conductor G with ground Blank no ground Manufactured by Nexans AmerCable Fax:

8 7-05VFD Type MMV-VFD Power Cable Three Conductor: kv 5kV % Insulation Level Rated 90 C Conductors () Soft annealed flexible stranded tinned copper per IEEE 50 Table. Insulation Extruded thermosetting 90 C Ethylene Propylene Rubber (EPR), meeting UL 09 (Type E), IEEE 50 (Type E) and UL 07. Insulation Shield Composite shield consisting of 0.0" tinned copper braided with nylon providing 0% copper Shielded coverage meeting UL 09, IEEE Std. 50, and UL 07. The nylon is colored for easy phase identification (three conductor = black, blue, red) without the need to remove the shield to find an underlying colored tape. Low smoke halogen-free jacket available on request. Conductor Shield A combination of semi-conducting tape and extruded thermosetting semi-conducting material meeting UL 09, IEEE 50 and UL07. Insulation Shield Semi-conducting layer meeting UL 09, IEEE 50 and UL 07. Symmetrical Insulated Grounding Conductors () Soft annealed flexible stranded tinned copper conductor per IEEE 50 Table. Gexol Insulation sized per Table. of UL07. Color: Green Jacket Ratings & Approvals n UL Listed as Marine Shipboard Cable (E) n American Bureau of Shipping (ABS) n Det Norske Veritas (DNV) Pending n Lloyd s Register of Shipping (LRS) Pending n 90 C Temperature Rating n Voltage Rating kv to 5kV (5kV available on request) A black, arctic grade, flame retardant, oil, abrasion, chemical and sunlight resistant thermosetting compound meeting UL 09/ CSA 5, IEEE 50, and UL 07. This jacket allows for isolation between the insulation shields and overall shield. Shields can then be terminated on opposite ends to minimize circulating currents. Armor/EMI Shield Overall tinned copper braid plus aluminum/ polyester tape provides 00% coverage. This braid serves as both an armor and EMI shield meeting both IEEE 50 and UL 07/CSA 5. Sheath (optional) A black, arctic grade, flame retardant, oil, abrasion, chemical and sunlight resistant thermosetting compound meeting UL 09/CSA 5, IEEE 50, and UL 07. Colored jackets for signifying different voltage levels are also available on special request (orange = kv and red = 5kV). Applications A flexible, braid and foil shielded, power cable specifically engineered for use in medium voltage variable frequency AC drive (VFD) applications. Features n Flexible stranded conductors and braided shields. Suitable for applications involving repeated flexing and high vibration. n Small minimum bending radius (x OD) for easy installation. n Insulation has a very low dielectric constant. This allows for longer output cable distances and minimizes common mode current. n Overall braid plus foil shield is engineered with 00% coverage and a surface transfer impedance <50 milliohms at 0MHz to contain EMI. n Symmetrical insulated ground conductors reduce induced voltage imbalances and carry common mode noise back to the drive. n High strand count conductors and braid shield design is much more flexible, easier to install and more resistant to vibration than Type MC cable. n Severe cold durability: exceeds CSA cold bend/cold impact (-0 C/-5 C). n Flame retardant: IEC - Category A and IEEE 0. n Suitable for use in Class I, Division, and Zone environments. www. amercable.com marine@amercable.com

9 Three Conductor Type MMV-VFD Marine Medium Voltage kv % Insulation Level Single Inductive Voltage Green Insulated Size Nominal Weight In Free Banked DC Resistance AC Resistance Reactance Drop Grounding AWG/ Part No. Diameter (Lbs./ Air in Trays at 5 C at 90 C, 0Hz (Ohms/ (Volts/Amp/ Conductor (x) kcmil mm 7-05 (Inches) 000 Ft.) (Amps) (Amps) (Ohms/000 Ft.) (Ohms/000 Ft.) 000 Ft.) 000 Ft.) Size (AWG) /0 /0 /0 / TSVFD -TSVFD -TSVFD -5TSVFD -TSVFD -7TSVFD -TSVFD -9TSVFD -0TSVFD -TSVFD -TSVFD -TSVFD -TSVFD Three Conductor Type MMV-VFD Marine Medium Voltage 5kV % Insulation Level Single Inductive Voltage Green Insulated Size Nominal Weight In Free Banked DC Resistance AC Resistance Reactance Drop Grounding AWG/ Part No. Diameter (Lbs./ Air in Trays at 5 C at 90 C, 0Hz (Ohms/ (Volts/Amp/ Conductor (x) kcmil mm 7-05 (Inches) 000 Ft.) (Amps) (Amps) (Ohms/000 Ft.) (Ohms/000 Ft.) 000 Ft.) 000 Ft.) Size (AWG) /0 /0 /0 / TSVFD -5TSVFD -59TSVFD -0TSVFD -TSVFD -TSVFD -TSVFD -TSVFD -5TSVFD -TSVFD Stranding Profile: See Page Ordering Type MMV-VFD Medium Voltage Cables Example: conductor MMV-VFD power cable 5kV # AWG Nexans AmerCable Type MMV-VFD Prefix TSVFD Specific Cable Number (from charts) Manufactured by Nexans AmerCable Fax:

10 7-05 Type MMV Medium Voltage Cable Single Conductor: 5kV 5kV, 00% & % Insulation Levels. Rated 90 C Multi-Conductor: 5kV 5kV, 00% & % Insulation Levels. Rated 90 C Individual Closest Equivalent Uninsulated Size Number Strand Dia. IEEE 5 Metric Size Conductor AWG/kcmil of Strands (inches) Std. Size (mm) Dia. (inches) /0 /0 /0 / MMV Stranding Profile MMV Ampacities & Electrical Data Ampacities are based on API RP F (June 999) Table or 5 for single conductor cables and Table for multi-conductor cables. The notes to these tables are also applicable. Ampacities are also based on a 90 C conductor temperature and a 5 C ambient temperature. Inductive reactance and voltage drop values are based on a 90 C conductor temperature and 0 Hz operation. Values for single conductor cables are based on a symmetrical triangular configuration. Please consult Nexans AmerCable on values for other configurations. MMV Bend Radius Armored Sheathed IEEE 5 X Diameter X Diameter X Diameter IEC 9 <" (5mm) X Diameter X Diameter x Diameter >" (5mm) X Diameter Transport <" (5mm) X Diameter X Diameter Canada X Diameter >" (5mm) X Diameter www. amercable.com marine@amercable.com