The Handtmann Armaturenfabrik. Safety without compromise. Safety valves for liquids, gases, and steam
|
|
- Randall West
- 5 years ago
- Views:
Transcription
1 The Handtann Araturenfabrik Safety without coproise for liquids, gases, and stea
2 f Safety Valves FoodSafe Tradition Meets Innovation fro Handtann are first choice for hygienically sensitive product areas in the beverage and food industries, as well as in the cheical-pharaceutical industry. With regard to safety, the protection of pressurized systes such as pressure vessels and pipelines, is an obligation for any operator. With Handtann safety valves you will be on the safe side. According to the Pressure Equipent Directive (PED 97/23/EC), pressurized systes in production plants have to be equipped with a safety device for coponent nuber/ce-ark pressure liitation, respectively for pressure relief. Handtann safety valves coply with that requireent. With regard to layout, anufacturing, and function they are constructed according to the requireents of AD 2000/ instructions A2. The confority of the valves with the PED is certified by the entioned authority as well as by the staped coponent nuber and the CE-ark. Corresponding to their function, safety valves are used in critical areas. Therefore, it is good to have a reliable and copetent partner for the layout of the valves. You know your production process, we know our safety valves! Various process paraeters affect the safe function during daily operation and have to be observed for a long-lasting reliability. Therefore, a process and risk analysis during the engineering phase is iperative. During tank filling or gas release in closed systes there is a pressure increase and the safety valves react. However, ore critical are unexpected incidents, like a alfunction of process valves or a therally caused liquid expansion. 2
3 Hygiene CIP Design Fluid SV function Fluidvolue Operation pressure Malfunction Operation teperature In case of a rising fluid pressure in closed systes, the pressure directly acts on the valve disk of the safety valve. This force is countered by a echanical back pressure fro a spring or a weight. valve outlet with valve disk Regulation AD 2000 defines liits for the opening and closing behavior, which are safely et by Handtann safety valves. Mostly, they clearly reain below such liits. Adjustable to specific process and custoer requireents Handtann safety valves are available in various types and perforances. In addition to the spring-loaded executions (No. 335, 325) and the pneuatic types (No. 336, 326), a weight-loaded odel (No. 320) is included in our line. Additional equipent such as proxiity switch, heating insets, etc. is available upon request. available valve types 3
4 Overview valve types and accessories Type Principle Characteristic blow-off behavior Fluids* DN-size Pressure range proportional proportional G/D / G/D / G/D / / / Weight F / 5.0 *F/liquids, G/gases, D/stea Type Lifting device anual/pneuatic Gasket EPDM/FPM* Proxiity switch Heating insets Set pressure with scale p N H p N H S p N H S p N H S p N H S p N H *FPM optional 4
5 We know what we are talking about! The developent of our safety valves is based on decades of experience in the beverage and biotechnical industries, cobined with the latest legal and hygienic requireents, and perfectly atched to the deands of our custoers. Gain fro our safety valve experience and fro our know-how around the topic Process Technique. For us not only the valve is iportant, but its vital function as part of an optially custoized process of your production. Experience in: stainless steel fittings and coponents, plant and process technique, vacuu valves, safety valves
6 Valve type 33501/33601 These Handtann safety valves show a blow-off behavior. During operation this eans a sensitive opening reaction and a reliable function, c valve type with pneuatic lifting cobined with a high blow-off capacity for liquids. This is also valid for the newly developed sall valves DN 15, 25, and 40. Copared to the old type 325/326 the blow-off capacity has alost doubled. Aside fro the flow geoetry, the hygienically perfect design of the product chaber was ost iportant during construction. The safety valves are fully CIP- and SIP-able. Equipped with additional accessories they can be integrated in a process control. Valve type 33521/33621 In soe applications the required set pressure only turns out during the coissioning. With this type Handtann offer a safety valve, which can be adjusted on-site to the operation process. It is equipped with an adjustable pressure range with scale for continuous control of the set pressure. With regard to design, flow geoetry, and opening behavior the valves correspond to types 33501/ valve type with anual lifting Valve type 33502/33602 These valves are characterized by their proportional blow-off behavior for liquids and gases. Thus, they are not only suitable for a siple overpressure protection, but also for pressure regulation or pressure keeping during ferentation. Very practical is the continuous pressure adjustent with scale for process-specifically changing pressure requireents. c valve type 33621/33602 with pneuatic lifting 6
7 Product area aterial stainless steel (316L) gaskets EPDM, FPM (FDA proof) surface 0.8 µ Other parts aterial stainless steel , (304, 304L) gaskets EPDM/HNBR surface ground, unpolished Production / CIP operation pressure 0 10 bar teperature -20 to 140 C / 160 C control air pressure 5 7 bar fluids (poisonless) liquids (F)/gases (G)/stea (D) acc. to Group II of PED 97/23/EC usual detergents for the food processing industry 2 4 % caustic/acid Process technical specials cutaway of valve type s certified for liquids, gases and stea s extensive sizes DN available s high blow-off capacities s process specific valve types s anual or pneuatic lifting s vertical/horizontal installation for spring-loaded valves s vertical installation for weight-loaded valves s variable process connections s optional accessories Constructional specials s solid housing construction s ball housing with hygienically designed product chaber s optiized flow and discharge behavior s EPDM, FPM gaskets (FDA) s divided valve disk, defined copressed gasket s pressure springs for high switching frequency s low-aintenance construction, long service life 7
8 Valve type 32500/32501/32502 The rearkable feature of these cost-effective types with variable connections is the copact and open housing. They are ost suitable for overpressure protection of sall vessels. Cobined with additional accessories (water trap, scale) they can also be used as bunging device for pressure keeping during ferentation. As the blow-off is given into the surrounding area they are useful for air and non-unhealthy gases. For the possible blow-off of stea special safety precautions will be indispensable. Valve type 32503/32603, 32504/32604 These valves are equipped with housing with a blow-off branch. They are suitable for the controlled blow-off of liquids, gases and stea fro sall to valve type with anual lifting ediu-sized vessels. As bunging device during ferentation they can be used for pressure keeping with cobined CO 2 recovery. Another feature is the possible application as overflow valve in a pipe syste. Valve type c valve type 32603/32604 with pneuatic lifting Handtann weight-loaded safety valves are characterized by a high blow-off capacity for liquids. With regard to cost and function this optiized valve type is the ideal solution for the overpressure protection of big vessels. Installed in a tank top flange it is ainly used in cobination with a vacuu valve as tank protection syste. Equipped with a pneuatic lifting device and proxiity switch the valve is suitable for integration in the process control. 8
9 Perforance range water ass flow [kg/h] SV-types SV 325/326 SV 320 SV 335/336 Perforance range air/gas volue flow [N³/h] cutaway of valve type SV-types SV 325/326 SV 335/336 Perforance range stea ass flow [kg/h] valve type 32010, weight-loaded SV-types SV 325/326 SV 335/336 9
10 Layout and operation of safety valves For the layout of the safety valves a detailed process exaination is necessary. The possible working pressure range is between the desired operation pressure and the adissible design pressure of the syste. This results in the set pressure which lies above the operation pressure. The difference between these two pressures has to be sufficiently big, in order to avoid a reaction of the safety valve in operation due to a short-tie pressure increase. Also iportant is a sufficient distance between opening pressure and ax. design pressure of the syste. doe cap with safety device syste design pressure Exaple: operation pressure range (ab operating condition) overpressure negative pressure 10 % % opening pressure set pressure test pressure closing pressure 2.2 bar 2.0 bar 1.8/1.6 bar operation pressure range ( operating condition) operation pressure 1.4 bar atospheric pressure tank far The adjusted test pressure of the safety valve ly corresponds to the set pressure at operating conditions. In case of an increasing overpressure (ab operating condition) the set pressure will be reached at first. The valve starts to open, fluid is blown-off and the syste pressure decreases. If the overpressure continues to increase the opening pressure with the specific blow-off capacity of the valve will be reached. With a perfect layout of the safety valve for the required perforance there will be no further pressure increase. In case of a decreasing overpressure the closing pressure is reached and the valve will close copletely. 10
11 Reproducible, tested and docuented quality Handtann offer a coplete and extensive quality package for the safety valves. Process, anufacture, and testing are certified acc. to the PED. The coponent nuber includes the adjusted test pressure (set pressure) and a specific valve serial nuber. Thus a clear retracing to our products and custoers is guaranteed. In addition to the Declaration of Confority further certificates are available. Every Handtann safety valve is tested and adjusted separately to the desired set pressure. A pressure odification at the valve at a later date is not possible due to internally adapted coponents. This way you are always on the safe side. Confority acc. to PED 11
12 , your specialist and partner for valves, plants, and engineering
Tubes Components Valves Units Engineering SO EVERYTHING KEEPS FLOWING. Safety valves Bunging valves Vacuum valves Tank dome fittings
SO EVERYTHING KEEPS FLOWING Safety valves Bunging valves Vacuum valves Tank dome fittings Reliable reaction at the right moment Safety components are part of our everyday life. Like anti-skid systems in
More informationMXV. Vertical Multi-Stage In-Line Pumps. Construction. Applications
MXV Construction Vertical ulti-stage pups with suction and delivery connections of the sae diaeter and arranged along the sae axis (in-line). Corrosion-resistant bearing sleeves lubricated by the puped
More informationTRAILED SPRAYERS RPS SERIES
TRAILED SPRAYERS RPS SERIES The outstanding quality of the new series of trailed sprayers fro Lochann Plantatec is the result of over fifty years of practical experience, the application of state-of-the-art
More informationABS lifting unit 2,3 kn
1 597 0533 GB 04.2014 en Installation and Operating Instructions Translation fro original instruction www.sulzer.co Installation and Operating Instructions for (for DL6151113) 2 Sulzer reserves the right
More informationSTN. Plastic Magnetic Drive Centrifugal Pumps STN 40 PP-GF. Pompe S.r.l. Available upon request :
STN Plastic Magnetic Drive Centrifugal Pups STN 40 PP-GF Copact, Plastic and Fluoroplastic Magnetic drive Horizontal - Single Stage - Centrifugal pups PP-GF (Polypropylene-Glass filled) - CFR-ETFE (Carbon
More informationUnit Activity Answer Sheet
Geoetry Unit Activity Answer Sheet Unit: Extending to Three Diensions This Unit Activity will help you eet these educational goals: Matheatical Practices You will use atheatics to odel real-world situations.
More informationWeight Optimization and Finite Element Analysis of Pressure Vessel Due to Thickness
2017 IJSRSET Volue 3 Issue 2 Print ISSN: 2395-1990 Online ISSN : 2394-4099 Theed Section: Engineering and Technology Weight Optiization and Finite Eleent Analysis of Pressure Vessel Due to Thickness Rashi
More informationNumerical simulation on fluctuation in wellhead pressure of geothermal well
Wellhead pressure (MPa) PROCEEDINGS, Thirty-Ninth Workshop on Geotheral Reservoir Engineering Stanford University, Stanford, California, February 4-6, 014 SGP-TR-0 Nuerical siulation on fluctuation in
More informationDewpoint Internal Gas Pressure and Chemical Composition of the Gas Within the Free Volume of DWPF Canistered Waste Forms (U)
a WSRCMS960244 OOdF 940804(cg Dewpoint Internal Gas Pressure and Cheical Coposition of the Gas Within the Free Volue of DWPF Canistered Waste Fors (U) by J R Harbour Westinghouse Savannah River Copany
More informationBasics of Flow measurement using Hot-film anemometer
Basics of Flow easureent using Hot-fil aneoeter Version 1.0 1/9 Inhaltsverzeichnis: 1. Definitions 1.1. Air Velocity 1.2. Aount (of Gas) 1.. Flow 1..1. Mass flow rate 1..2. Voluetric flow rate 1... Standard
More informationAir Saving Speed Controller
Air Saving Speed Controller Reduce air consuption just by ounting to air cylinder Air consuption 25 reduced by %!! (33 % reduction: Supply at 0.5 MPa, Air supply at 0.1 MPa) RoHS Acquire two- control just
More informationGuide to WSH Obligations for Shipmasters and Contractors for Anchorage Works
Guide to WSH Obligations for Shipasters and Contractors for Anchorage Works Year of issue: 2014 Guide to WSH Obligations for Shipasters and Contractors for Anchorage Works Contents Section 1 Master s Obligations
More informationBall Float Steam Trap UNA 43 PN 16/CL 125/JIS 10K UNA 46 PN 40/CL 150/CL 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6"
Data Sheet 819584-00 Issue Date: 01/17 Ball Float Steam Trap UNA 43 PN 16/C 125/JIS 10K UNA 46 PN 40/C 150/C 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6" UNA 43 hl, UNA 46 hl UNA 43 v, UNA 46 v with
More informationAccessories. Accessories for pressure maintenance
Accessories Accessories for pressure aintenance IMI PNEUMATEX / Accessories and ervice / Accessories Accessories High quality accessories coplete the range of PNEUMATEX pressure aintenance products. Thus
More information6301 TYPE CAST IRON SAFETY VALVES
Pressure (bar) 6301 TYPE CAST IRON SAFETY VALVES FEATURES The 6301 type safety valve is a device designed to protect installations against possible overpressure. It operates automatically and closes when
More information776 Cryogenic Safety Valve
776 Cryogenic Safety Valve INTRODUCTION 776 Cryogenic Safety Valve The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both plant
More informationIntegration of Lean Approaches to Manage a Manual Assembly System
Open Journal of Social Sciences, 204, 2, 226-23 Published Online Septeber 204 in SciRes. http://www.scirp.org/journal/jss http://dx.doi.org/0.4236/jss.204.29038 Integration of Lean Approaches to Manage
More informationIn-line Twin Pumps. Fields of Application. Medium Handled Liquids not chemically or mechanically aggressive to the pump materials.
Type Series Booklet./- In-line Twin Pups Fields of Application F Heating systes F Air-conditioning systes F Cooling circuits F Water supply systes Mediu Handled Liquids not cheically or echanically aggressive
More informationAn improvement in calculation method for apparel assembly line balancing
Indian Journal of Fibre & Textile Research Vol.38, Septeber 2013, pp 259-264 An iproveent in calculation ethod for apparel assebly line balancing F Khosravi 1, a, A H Sadeghi 1 & F Jolai 2 1 Textile Departent,
More informationPOP Safety Valve. POP Safety Valve INTRODUCTION DEFINITIONS
POP Safety Valve POP Safety Valve INTRODUCTION The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both plant and personnel. Safety
More information756 Safety Relief Valves
756 S a fe t y R e l i e f Va l ve s INTRODUCTION 756 Safety Relief Valves The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both
More informationRace car damping 2. Fig-1 quarter car model.
Race car daping A nuber of issues ago I wrote an article on exploring approaches to specify a race car daper. This article is the second in that series and we shall be following on fro where we left off.
More informationBT6HC Hygienic Sanitary Balanced Pressure Steam Trap for High Capacity and CIP/SIP Applications
1800350/6 IM-P180-12 ST Issue 6 BT6HC Hygienic Sanitary Balanced Pressure Steam Trap for High Capacity and CIP/SIP Applications Installation and Maintenance Instructions 1. Safety information 2. General
More informationThe MNK-RP meter has a special characteristic. The roller counters are completely encased and are surrounded by a protective fluid.
Multi-jet doestic water eters Multi-jet eters General data R+S doestic water eters are ulti-jet turbine water eters. The construction and connection diensions are in accordance with DIN ISO 4064 and DIN
More informationSchedule A. Measurement Requirements for Oil and Gas Operations
Schedule A Measureent Requireents for Oil and Gas Operations Directive PNG017 August 1, 2017 Version 2.1 Governing Legislation: Act: The Oil and Gas Conservation Act Regulation: The Oil and Gas Conservation
More informationMXV-E. Variable Speed Multi-Stage Vertical Pumps (max 2900 rpm)
Variable Speed Multi-Stage Vertical Pups (ax 9 rp) Construction Vertical ulti-stage pups with suction and delivery connections of the sae diaeter and arranged along the sae axis (in-line). Corrosion-resistant
More informationPressure reducing station. ARI-Pressure reducing station, self-acting or with electro-pneumatic control. ARI-PREsys -S. Pressure reducing station
ARI-, self-acting or with electro-pneumatic control ARI-PREsys -S for steam ready for operation self-acting or with electro-pneumatic control Pipe material: P235GH 1.4571/1.4541 Valve materials: EN-JL1040
More informationValves. Diaphragm shut-off valves, kidney-type
Valves Diaphragm shut-off valves, kidney-type Application When leakage of even the smallest quantities must be avoided with certainty For maximum requirements to operating safety For maximum requirements
More informationCAST IRON SAFETY VALVE TYPE 6301
CHARACTERISTICS The 6301 safety valve is dedicated to protect the equipment from potential overpressure. This is an automatic device that closes when the pressure conditions are back to normal. It is a
More informationHANDBOOK SAFETY DEVICES. Ed SAFETY DEVICES DS-ED 01/ ENG 1
HANDBOOK Ed. 2017 DS-ED 01/2017 - ENG 1 CHAPTER 9 BURSTING DISC DEVICES IN SERIES 3070 SCOPE Use: protection against possible overpressure of the apparatuses listed below, with regard to the operating
More informationSi C132. Safety valves for pressure relief in accordance to PED, DIN/EN and ASME. Engineering GREAT Solutions
Safety valves for pressure relief in accordance to PED, DIN/EN and ASME Engineering GREAT Solutions Si C132 Features The universal compact safety valve > 3 body seat sizes for appropriate size selection
More informationMODELLING THE EFFECTS OF PEDESTRIANS ON INTERSECTION CAPACITY AND DELAY WITH ACTUATED SIGNAL CONTROL
MODELLING THE EFFECTS OF PEDESTRIANS ON INTERSECTION CAPACITY AND DELAY WITH ACTUATED SIGNAL CONTROL ABSTRACT Zong Tian, Ph.D., P.E. Feng Xu, Graduate Assistant Departent of Civil and Environental Engineering
More informationPRESSURE REDUCING VALVE RP45 (EN)
PRESSURE REDUCING VALVE RP45 (EN) DESCRIPTION The ADCA RP45 series pressure reducing valves are single seat bellows sealed controllers, operating without auxiliary energy, designed for use on steam, compressed
More informationAIR OPERATED DIAPHRAGM PUMPS
AIR OPERATED DIAPHRAGM PUMPS Y1.NDP.5 52 Y1.DP. / Y1.NDP. 54 Y1.NDP.15 56 Y1.NDP.2 58 Y1.NDP.25 6 Y1.NDP.4 62 Y1.NDP.5 64 Y1.NDP. 66 Applications Cheical industry Acids and alkalies Suspensions and solutions
More informationTECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS
TECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution
More informationA soft sealed atmospheric safety valve with large flow capacity and soft seat tightness for steam condenser and turbine applications
SAPAG A soft sealed atmospheric safety valve with large flow capacity and soft seat tightness for steam condenser and turbine applications Features The Sapag Series 1100 steam safety valve is used for
More informationGA24 Technical Datasheet
GA24 Technical Datasheet Variable-area flowmeter Sturdy construction for several applications Local indication without auxiliary power Replaceable mounting parts KROHNE CONTENTS GA24 1 Product features
More informationSafety Valves Selecting Safety Valves
1 History In 1679 Denis Papin developed a pressure cooker using pressurized steam. While demonstrating it the first time to the Royal Society this pressure cooker exploded. Only after Papin invented the
More informationPTF4 Pivotrol Pump (patented) version Dual Mechanism - Pressure Powered Pump
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationPressure reducing station. ARI-Pressure reducing station, self-acting or with electro-pneumatic control. ARI-PREsys -S. Pressure reducing station
ARI-, self-acting or with electro-pneumatic control ARI-PREsys -S for steam ready for operation self-acting or with electro-pneumatic control Pipe material: P235GH 1.4571/1.4541 Valve materials: EN-JL1040
More information501 Interchange Design Interchange Design Considerations... 10
5 Interchange Design Table of Contents 51 Interchange Design... 1 51.1 General...1 51.2 Interchange Type...1 51.2.1 Diaond Interchanges... 1 51.2.1.1 Tight Urban Diaond Interchange (TUDI)... 1 51.2.1.2
More informationPressure Equipment Directive (PED) 97/23/EC Page 033 of 124
Pressure Equipment Directive (PED) 97/23/EC Page 033 of 124 13.7 Pressure Equipment Directive (PED) 97/23/EC 1 The Pressure Equipment Directive (PED) 97/23/EC applies to the design, manufacturing and conformity
More informationSV60 Safety valves. for use with steam, gas and liquids
SV60 Safety valves for use with steam, gas and liquids Spirax Sarco safety valves - protecting people, plant and profit The SV60 spring loaded full lift safety valve range from Spirax Sarco has been designed
More informationG type DUCTED EXHAUST SAFETY VALVE 2871 AND 288X SERIES. Model/Ref:
Model/Ref: 28713 www.lauridsenindustri.com CHARACTERISTICS The G type safety valves are dedicated to protect the equipment from potential overpressure. They are automatic and close when the pressure conditions
More informationInstruction manual. HLSD-2 Circular Access Tank Cover IM-TE91K041-EN1 ESE Date of issue: August 29, 2012
Instruction manual HLSD-2 Circular Access Tank Cover ESE0226 Date of issue: August 29, 2012 First published: August 29, 2012 Contents Contents... 1 Introduction... 3 General description... Application...
More informationTECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS
TECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS THE COMPANY ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and
More informationC6Hi (g) 6 H2O + 6 C02(g) + energy
Experient Cell Respiration 110 Cell respiration refers to the process of converting the cheical energy of organic olecules into a for iediately usable by organiss. Glucose ay be oxidized copletely if sufficient
More informationWastewater combination air valve in stainless steel AISI 316 Mod. SCS
Wastewater combination air valve in Mod. SCS The air valve guarantees the proper operation of sewage/industrial lines allowing the entrance of large quantity of air in case of pipe bursting or draining,
More informationSafety Valves. Product Information. It s all at Albion
Safety Valves Product Information It s all at Albion ART 642 Gunmetal Safety Valve Features Screwed BSP Parallel (ISO 228) Body Gunmetal Suitable for Gases, Liquids & Steam Fitted with Diaphragm to Protect
More informationThe water outgassing rate of internal surfaces of vacuum systems
Journal of Physics: Conference Series PAPER OPEN ACCESS The water outgassing rate of internal surfaces of vacuu systes Recent citations - Soe probles of the vacuu technique developent L N Rozanov and A
More informationKPS - KPF - KP GENERAL DATA PERIPHERAL PUMPS
KS - KF - K ERIERL UMS KS /6 KF /6 K 8/8 K 6/6 - K 6/2 GENERL DT pplications eripheral centrifugal pup with copact diensions. ble to generate high heads and suitable for doestic installations, water supply
More informationPressure reducing valves Index
Index General information page Introduction 506 General introduction 507 for a steam plant 509 Product information BSP thread page Brass 510 ; BSP female thread 511 ; BSP male thread 513 Stainless steel
More informationLiquid level regulating valves Types PMFL / PMFH and SV
Data sheet Liquid level regulating valves Types / PMFH and SV For modulating liquid level control in refrigeration, freezing and air conditioning plant, a system comprising a liquid level regulating valve
More informationIMPROVED SPECTRAL WAVE MODELLING OF WHITE-CAPPING DISSIPATION IN SWELL SEA SYSTEMS
Proceedings of OMAE 2004: 23rd International Conference on Offshore Mechanics and Arctic Engineering 20-25 June 2004, Vancouver, Canada OMAE2004-51562 IMPROVED SPECTRAL WAVE MODELLING OF WHITE-CAPPING
More informationPressure Reducing Valve DMV 755
Pressure Reducing Valve DMV 755 Nominal size DN 10 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 1 to 9 bar control valve for reliable reduction of system pressures to
More informationTank Blanketing Regulators
Tank Blanketing Regulators Low-Pressure Reducing Regulator Type BR Low-Pressure Relief Valve Type BS Description Tank blanketing, or padding, is the process and practice of covering a stored commodity,
More informationHorizontal Bladder Tanks
DATA SHEET Horizontal Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationVertical Bladder Tanks
DATA SHEET Vertical Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationTP1 and TP2 Temporary Cone Shaped Strainers
1698051/2 IM-P169-07 ST Issue 2 TP1 and TP2 Temporary Cone Shaped Strainers Installation and Maintenance Instructions TP1 1. Safety information 2. General product information 3. Installation and commissioning
More informationContrans P HART Transmitter
Contrans P HART Transitter ASD 800 / 810 with Reote Seal for Gauge / Absolute Pressure and Level Span: 60 to 600 (16 abs) (6 kpa to 60,000 kpa) (6 kpa to 1,600 kpa abs) 10/ (624.bp) n Isolation between
More informationModulating liquid level regulators, servo-controlled PMFL / PMFH and SV
MAKING MODERN LIVING POSSIBLE Technical brochure Modulating liquid level regulators, servo-controlled / PMFH and SV For modulating liquid level control in refrigeration, freezing and air conditioning plant,
More informationPressure Relief Valve DHV 718
Pressure Relief Valve DHV 718 Nominal size DN 8 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 0.5 to 10 bar diaphragm controlled pressure relief valve simple design,
More informationOverflow valves Type OFV REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Overflow valves Type OFV 20-25 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction....................................................................................... 3 Features...........................................................................................
More informationPressure & Flame Protection
Pressure & Flame Protection Safety & Regulating Valves Safety & Regulating Valves Pressure Reducing Valves - These valves are installed where there is a requirement to reduce the pressure from one level
More informationDeclaration of Conformity as per Directive 97/23/EC
Declaration of Conformity as per Directive 97/23/EC The manufacturer declares that:, 47906 Kempen, Germany Multi-way diverting valves Series 29a and Series 29b, with packing with lever 1. The valves are
More informationName: Answer Key Date: Regents Physics. Waves
Nae: Answer Key Date: Regents Physics Test # 13 Review Waves 1. Use GUESS ethod and indicate all vector directions. 2. Ters to know: echanical wave, transverse wave, longitudinal wave, surace wave, electroagnetic
More informationTank Blanketing Regulators
Tank Blanketing Regulators Low-Pressure Reducing Regulator Type BR Low-Pressure Relief Valve Type BS Description Tank blanketing, or padding, is the process and practice of covering a stored commodity,
More informationGlass tube flowmeters Series 2000 Variable area flowmeter for low flows of liquids and gases
Glass tube flowmeters Series 2000 Variable area flowmeter for low flows of liquids and gases Short mounting length and compact construction, especially indicated for control panels Easy installation. No
More informationLiquid Holdup in Geothermal Wells
Proceedings World Geotheral Congress 005 Antalya, Turkey, 4-9 April 005 Liquid Holdup in Geotheral Wells Sabodh K. Garg, John W. Pritchett, and Jaes H. Alexander Science Applications International Corporation
More informationEstimation of the Effect of Cadence on Gait Stability in Young and Elderly People using Approximate Entropy Technique
MEASUREMENT SCIENCE REVIEW, Volue 4, Section 2, 4 Estiation of the Effect of Cadence on Gait Stability in Young and Elderly People using Approxiate Entropy Technique M. Arif *, Y. Ohtaki **, R. Nagatoi
More informationRELATIONS BETWEEN CENTRIFUGAL BASKET DESIGNS AND MASSECUITE CHARACTERISTICS
Proceedings of The South African Sugar Technologists' Association - April 1967 79 RELATIONS BETWEEN CENTRIFUGAL BASKET DESIGNS AND MASSECUITE CHARACTERISTICS by Dr. HELMUT EICHHORN Salzgitter Maschinen
More informationModel MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationPRODUCT INFORMATION FLOWSIC500 CUSTODY TRANSFER MEASUREMENT IN NATURAL GAS DISTRIBUTION. Gas flow meters
U W500 UY U U G U Gas flow eters U U Y. U G U U U ocal authorities purchase natural gas and sell it to users such as power stations, priary industries, and other industrial consuers. ecause considerable
More informationRecommendations on Two Acceleration Measurements with Low Strain Integrity Test
Recoendations on Two Acceleration Measureents with Low Strain Integrity Test Liqun Liang, PhD., P.E., 1 Scott Webster, P.E., 2 and Marty Bixler, P.E. 3 1 Pile Dynaics Inc., 3725 Aurora Rd, Cleveland, Ohio
More informationPressure Relief Device Investigation Testing Lessons Learned
Pressure Relief Device Investigation Testing Lessons Learned 2018 General Meeting Presentation Prepared by: Joseph F. Ball, P.E. Overview National Board Investigation Testing Process Summary of Results
More informationModel MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationHM and HM34 Inverted Bucket Steam Traps Installation and Maintenance Instructions
0670350/4 IM-S03-11 ST Issue 4 HM and HM34 Inverted Bucket Steam Traps Installation and Maintenance Instructions 1. Safety information 2. General product information HM Series 3. Installation 4. Commissioning
More informationModel MTB-ASME Horizontal Bladder Tanks
DATA SHEET Model MTB-ASME Horizontal Bladder Tanks Features n UL Listed and FM Approved for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure
More informationDesign of Saddle Support for Horizontal Pressure Vessel Vinod Kumar, Navin Kumar, Surjit Angra, Prince Sharma
World Acadey of Science, Engineering and Technology Vol:8, No:, 0 Design of Saddle Support for Horizontal Pressure Vessel Vinod Kuar, Navin Kuar, Surjit Angra, Prince Shara International Science Index,
More informationGENERAL ARTICLES. Xing Wang
A Granger causality test of the causal relationship between the nuber of editorial board ebers and the scientific output of universities in the field of cheistry Xing Wang Editorial board ebers, who are
More informationSpilt body Flange ball valve. TC-205MFF-PN1640 User Manual English Version. Document No: TC-205MFF-PN1640.Ur-manual. Date: 2007/04/2617. Version: 1.
Spilt body Flange ball valve TC-205MFF-PN1640 Series PED Category I,II TC-205MFF-PN1640 User Manual English Version Use for company in Europe who will place the product on the market, please amend which
More informationSimulating the effects of fatigue and pathologies in gait
Siulating the effects of fatigue and pathologies in gait T Koura 1, A Nagano, H Leung 3 and Y Shinagawa 4 1,3 Departent of Coputer Engineering and Inforation Technology, City University of Hong Kong, 83
More informationPRODUCT INFORMATION FLOWSIC500 CUSTODY TRANSFER MEASUREMENT IN NATURAL GAS DISTRIBUTION. Gas flow meters
U W500 UY U U G U Gas flow eters U U Y. U G U U U ocal authorities purchase natural gas and sell it to users such as power stations, priary industries, and other industrial consuers. ecause considerable
More informationRegulating valves REG-SA and REG-SB
MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG-SA and REG-SB REG-SA and REG-SB are angleway and straightway hand regulating valves, which act as normal stop valves in closed position.
More informationANTI-EXPLOSION PANELS
ANTI-EXPLOSION PANELS ATEX TO AVOID THE FIRE AND EXPLOSION OF THE FILTERS AND SILOS WITH AIRCOM S FIREBREAK SASH SHUTTER AND ANTI-EXPLOSION PANELS CERTIFIED WITH THE NORM UNI EN14797 CERTIFIED 2049 DNV-MUNO
More informationMetal Expansion Joints. System solutions for reliable connections in plant engineering and construction.
Metal. System solutions for reliable connections in plant engineering and construction. GASKETS TECHNICAL TEXTILES EXPANSION JOINTS INSULATION NEW MATERIALS Standard- and tailor-made : economic solutions
More informationPRODUCT INFORMATION FLOWSIC30 ULTRASONIC GAS FLOW METER FOR WELLHEAD APPLICATIONS. Gas flow meters
U W30 U G W W Gas flow eters W30 Gas flow eters Y U W G oal bed ethane is a ajor part of the huge unconventional gas resources worldwide and is becoing increasingly iportant for the world's energy supplies.
More informationOperating Instructions
Table of Contents Table of Contents... 2 Conventions Used in this Manual... 4 1. Introduction...5 1.1. Notes on this anual... 6 1.2. Modes Covered by this Manual... 6 2. Basic Operation...7 2.1. Turning
More informationVALFONTA INSTRUCTIONS: OPERATION AND INSTALLATION PRESSURE REDUCING VALVE MODEL M2
INSTRUCTIONS: OPERATION AND INSTALLATION PRESSURE REDUCING VALVE MODEL M2 Pressure Reducing Valve M2 - Operation and Installation - 1 - M2-13E-ENG FEBRUARY 2017 ÍNDICE PÁGINA 1 IDENTIFICATION PLATE LEGEND
More information2-Port Seat Valves with Flange, PN 16
4 40 2-Port Seat Valves with Flange, PN 6 VVF4... Grey cast iron EN-GJL-250 valve body DN 50...50 k vs 9...00 m /h Can be equipped with SQX- electromotoric or SKD...-, SKB...- or SKC...- electrohydraulic
More informationTECHNOLOGIES. M Series. Positive return metering pumps [API675]
M Series Positive return metering pumps [API675] Hydraulic double diaphragm metering pump in AISI 316L stainless steel A line of plunger and hydraulic double diaphragm metering pumps designed according
More informationwith remote seals for gauge / absolute pressure and level Spans:6 kpa MPa ( psi) 6 kpa abs... 3 MPa abs. (0.9...
Multi Vision 2020TG/TA Digital transitters with reote seals for gauge / absolute pressure and level Spans:6 kpa... 60 MPa (0.9...9000 psi) 6 kpa abs.... 3 MPa abs. (0.9...450 psia) 10/15-4.15 EN M01515x1.tif
More informationS1, S2, S3, S5, S6, S7, S8, S12 and S13 Separators Installation and Maintenance Instructions
PREVIOUS REFERENCE NO. IMP02355 0231150/13 IMF0501ENISS2 CMGT S1, S2, S3, S5, S6, S7, S8, S12 and S13 Separators Installation and Maintenance Instructions 1. Safety information 2. General product information
More informationSTAINLESS STEEL OVERFLOW VALVE TYPE 417
MAIN CHARACTERISTICS The 417 valve is intended for the discharge of fluids overflow when an upstream limitation of pressure is looked for, for example downstream to a pump. This valve also works in presence
More informationOperating instructions - Translation of the original -
Operating instructions - Translation of the original - Overflow valves Typ 5076 DN 10 - DN100 KIESELMANN GmbH Paul-Kieselmann-Str.4-10 D - 75438 Knittlingen +49 (0) 7043 371-0 Fax: +49 (0) 7043 371-125
More informationOverflow valves Type OFV Type OFV-SS REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Overflow valves Type OFV 20-25 Type OFV-SS 20-25 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction.......................................................................................
More informationInstallation, Operation and Maintenance Instructions Buffer Vessel OM006
Installation, Operation and Maintenance Instructions Buffer Vessel OM006 Calorifiers Heat Exchangers Pressurisation Units Sales Tel: 01457 835700 Sales Fax: 01457 832700 E-mail: sales@gmsthermal.co.uk
More informationSV5 Safety Valve Installation and Maintenance Instructions
3120036/3 IM-S13-12 CH Issue 3 SV5 Safety Valve Installation and Maintenance Instructions 1. General specification 2. Supply 3. Before fitting the valve 4. Installation 5. Damage prevention 6. Commissioning
More informationSeated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange
Data sheet Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange Description VF 2 VF 3 VF 2 and VF 3 valves provide a quality, cost effective solution for most water and chilled applications.
More information6-5 Maintenance Manual
Non Return Valve 6-5 Maintenance Manual Contents 1. PRODUCT DESCRIPTION... 1 1.1 How it works... 1 1.2 Overall dimensions... 3 1.3 Technical datasheet... 4 1.3.1 Push flow situation... 4 1.3.2 Pull flow
More information