Mineral flotation collector. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)
|
|
- Georgiana Terry
- 5 years ago
- Views:
Transcription
1 1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Recommended Use of the Chemical and Restrictions on Use Mineral flotation collector. Supplier: Ixom Operations Pty Ltd ABN: Street Address: Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia Telephone Number: Emergency Telephone: (ALL HOURS) Please ensure you refer to the limitations of this Safety Data Sheet as set out in the "Other Information" section at the end of this Data Sheet. 2. HAZARDS IDENTIFICATION Classified as Dangerous Goods by the criteria of the Australian Dangerous Goods Code (ADG Code) for Transport by Road and Rail; DANGEROUS GOODS. This material is hazardous according to Safe Work Australia; HAZARDOUS CHEMICAL. Classification of the chemical: Flammable liquids - Category 4 Skin Corrosion - Sub-category 1B Eye Damage - Category 1 Skin Sensitisation - Category 1 Carcinogenicity - Category 2 SIGNAL WORD: DANGER Hazard Statement(s): H227 Combustible liquid. H314 Causes severe skin burns and eye damage. H317 May cause an allergic skin reaction. H351 Suspected of causing cancer. Precautionary Statement(s): Prevention: P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P210 Keep away from heat, sparks, open flames, hot surfaces. No smoking. P260 Do not breathe mist, vapours, spray. P264 Wash hands thoroughly after handling. P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear protective gloves / protective clothing / eye protection / face protection. P281 Use personal protective equipment as required. Page 1 of 7 Issued: 24/06/2015
2 Response: P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P302+P352 IF ON SKIN: Wash with plenty of soap and water. P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P321 Specific treatment (see First Aid Measures on Safety Data Sheet). P363 Wash contaminated clothing before re-use. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P310 Immediately call a POISON CENTER or doctor/physician. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 IF exposed or concerned: Get medical advice/attention. P370+P378 In case of fire: Use extinguishing media as outlined in Section 5 of this Safety Data Sheet to extinguish. Storage: P403+P235 Store in a well-ventilated place. Keep cool. P405 Store locked up. Disposal: P501 Dispose of contents and container in accordance with local, regional, national, international regulations. Other Hazards: AUH031 Contact with acids liberates toxic gas. Poisons Schedule (SUSMP): None allocated. 3. COMPOSITION AND INFORMATION ON INGREDIENTS Components CAS Number Proportion Hazard Codes O-Isopropyl ethyl thiocarbamate >60% H317 H412 Phosphorodithioic acid, O,O-dibutyl ester, sodium <10% H314 salt Isopropyl alcohol <10% H225 H319 H336 1,3-Diethyl thiourea <2% H302 H317 H318 H351 H335 H412 Non hazardous component(s) - to 100% - 4. FIRST AID MEASURES For advice, contact a Poisons Information Centre (e.g. phone Australia ; New Zealand ) or a doctor. Inhalation: Remove victim from area of exposure - avoid becoming a casualty. Remove contaminated clothing and loosen remaining clothing. Allow patient to assume most comfortable position and keep warm. Keep at rest until fully recovered. If patient finds breathing difficult and develops a bluish discolouration of the skin (which suggests a lack of oxygen in the blood - cyanosis), ensure airways are clear of any obstruction and have a qualified person give oxygen through a face mask. Apply artificial respiration if patient is not breathing. Seek immediate medical advice. Skin Contact: If spilt on large areas of skin or hair, immediately drench with running water and remove clothing. Continue to wash skin and hair with plenty of water (and soap if material is insoluble) until advised to stop by the Poisons Information Centre or a doctor. Page 2 of 7
3 Eye Contact: Immediately wash in and around the eye area with large amounts of water for at least 15 minutes. Eyelids to be held apart. Remove clothing if contaminated and wash skin. Urgently seek medical assistance. Transport promptly to hospital or medical centre. Ingestion: Immediately rinse mouth with water. If swallowed, do NOT induce vomiting. Give a glass of water. Seek immediate medical assistance. Indication of immediate medical attention and special treatment needed: Treat symptomatically. Can cause corneal burns. 5. FIRE FIGHTING MEASURES Suitable Extinguishing Media: Fine water spray, normal foam, dry agent (carbon dioxide, dry chemical powder). Hazchem or Emergency Action Code: 2R Specific hazards arising from the chemical: Combustible liquid. Corrosive substance. Special protective equipment and precautions for fire-fighters: On burning will emit toxic fumes, including those of hydrogen sulfide, oxides of nitrogen, oxides of sulfur, and oxides of phosphorus. Fire fighters to wear self-contained breathing apparatus and suitable protective clothing if risk of exposure to vapour or products of combustion. 6. ACCIDENTAL RELEASE MEASURES Emergency procedures/environmental precautions: Shut off all possible sources of ignition. Clear area of all unprotected personnel. If contamination of sewers or waterways has occurred advise local emergency services. Personal precautions/protective equipment/methods and materials for containment and cleaning up: Wear protective equipment to prevent skin and eye contact. Avoid breathing in vapours. Work up wind or increase ventilation. Contain - prevent run off into drains and waterways. Use absorbent (soil, sand or other inert material). Collect and seal in properly labelled containers or drums for disposal. Wash area down with excess water. 7. HANDLING AND STORAGE Classified as a C1 (COMBUSTIBLE LIQUID) for the purpose of storage and handling, in accordance with the requirements of AS Refer to State Regulations for storage and transport requirements. Precautions for safe handling: Avoid skin and eye contact and breathing in vapour, mists and aerosols. Conditions for safe storage, including any incompatibilities: Store in a cool, dry, well ventilated place. Store away from sources of heat or ignition. Store away from incompatible materials described in Section 10. Keep containers closed when not in use - check regularly for leaks. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Control Parameters: No value assigned for this specific material by Safe Work Australia. However, Workplace Exposure Standard(s) for constituent(s): Page 3 of 7 Issued: 24/06/2015
4 Isopropyl alcohol: 8hr TWA = 983 mg/m 3 (400 ppm), 15 min STEL = 1230 mg/m 3 (500 ppm) As published by Safe Work Australia Workplace Exposure Standards for Airborne Contaminants. TWA - The time-weighted average airborne concentration of a particular substance when calculated over an eight-hour working day, for a five-day working week. STEL (Short Term Exposure Limit) - the airborne concentration of a particular substance calculated as a time-weighted average over 15 minutes, which should not be exceeded at any time during a normal eight hour work day. According to current knowledge this concentration should neither impair the health of, nor cause undue discomfort to, nearly all workers. These Workplace Exposure Standards are guides to be used in the control of occupational health hazards. All atmospheric contamination should be kept to as low a level as is workable. These workplace exposure standards should not be used as fine dividing lines between safe and dangerous concentrations of chemicals. They are not a measure of relative toxicity. Appropriate engineering controls: Ensure ventilation is adequate and that air concentrations of components are controlled below quoted Workplace Exposure Standards. Keep containers closed when not in use. If in the handling and application of this material, safe exposure levels could be exceeded, the use of engineering controls such as local exhaust ventilation must be considered and the results documented. If achieving safe exposure levels does not require engineering controls, then a detailed and documented risk assessment using the relevant Personal Protective Equipment (PPE) (refer to PPE section below) as a basis must be carried out to determine the minimum PPE requirements. Individual protection measures, such as Personal Protective Equipment (PPE): The selection of PPE is dependent on a detailed risk assessment. The risk assessment should consider the work situation, the physical form of the chemical, the handling methods, and environmental factors. OVERALLS, CHEMICAL GOGGLES, FACE SHIELD, GLOVES (Long), APRON, RUBBER BOOTS. Wear overalls, chemical goggles, face shield, elbow-length impervious gloves, splash apron or equivalent chemical impervious outer garment, and rubber boots. Always wash hands before smoking, eating, drinking or using the toilet. Wash contaminated clothing and other protective equipment before storage or re-use. If determined by a risk assessment an inhalation risk exists, wear an organic vapour/particulate respirator meeting the requirements of AS/NZS 1715 and AS/NZS PHYSICAL AND CHEMICAL PROPERTIES Physical state: Colour: Odour: Solubility: Liquid Yellow to Dark Brown Pungent Sparingly soluble in water. Page 4 of 7 Issued: 24/06/2015
5 Specific Gravity: ca. 1 Relative Vapour Density (air=1): Not available Vapour Pressure (20 C): Not available Flash Point ( C): 68 (CC) Flammability Limits (%): Not available Autoignition Temperature ( C): Not available Boiling Point/Range ( C): Not available ph: STABILITY AND REACTIVITY Reactivity: Chemical stability: Possibility of hazardous reactions: Conditions to avoid: Contact with acids liberates toxic gas. No information available. Reacts with mineral acids evolving flammable and toxic hydrogen sulfide gas. Avoid exposure to heat, sources of ignition, and open flame. Incompatible materials: Incompatible with acids, oxidising agents, mineral acids. Hazardous decomposition products: Hydrogen sulfide. Oxides of nitrogen. Oxides of sulfur. Oxides of phosphorus. 11. TOXICOLOGICAL INFORMATION No adverse health effects expected if the product is handled in accordance with this Safety Data Sheet and the product label. Symptoms or effects that may arise if the product is mishandled and overexposure occurs are: Ingestion: Eye contact: Skin contact: Inhalation: Swallowing can result in nausea, vomiting, diarrhoea, abdominal pain and chemical burns to the gastrointestinal tract. A severe eye irritant. Corrosive to eyes; contact can cause corneal burns. Contamination of eyes can result in permanent injury. Contact with skin will result in severe irritation. Corrosive to skin - may cause skin burns. A skin sensitiser. Repeated or prolonged skin contact may lead to allergic contact dermatitis. Material may be irritant to the mucous membranes of the respiratory tract (airways). Acute toxicity: Chronic effects: Suspected of causing cancer. This product may liberate carbon disulfide on contact with moist skin. Chronic exposure to carbon disulfide may produce central and peripheral nervous system, cardiovascular, gastrointestinal kidney and eye disorders. 12. ECOLOGICAL INFORMATION Ecotoxicity Avoid contaminating waterways. 13. DISPOSAL CONSIDERATIONS Page 5 of 7
6 Disposal methods: Refer to Waste Management Authority. Dispose of contents and container in accordance with local, regional, national, international regulations. 14. TRANSPORT INFORMATION Road and Rail Transport Classified as Dangerous Goods by the criteria of the Australian Dangerous Goods Code (ADG Code) for Transport by Road and Rail; DANGEROUS GOODS. UN No: 1719 Transport Hazard Class: 8 Corrosive Packing Group: II Proper Shipping Name or Technical Name: CAUSTIC ALKALI LIQUID, N.O.S. (CONTAINS PHOSPHORODITHIOIC ACID, O,O-DIBUTYL ESTER, SODIUM SALT) Hazchem or Emergency Action 2R Code: Marine Transport Classified as Dangerous Goods by the criteria of the International Maritime Dangerous Goods Code (IMDG Code) for transport by sea; DANGEROUS GOODS. UN No: 1719 Transport Hazard Class: 8 Corrosive Packing Group: II Proper Shipping Name or Technical Name: CAUSTIC ALKALI LIQUID, N.O.S. (CONTAINS PHOSPHORODITHIOIC ACID, O,O-DIBUTYL ESTER, SODIUM SALT) IMDG EMS Fire: IMDG EMS Spill: F-A S-B Air Transport Classified as Dangerous Goods by the criteria of the International Air Transport Association (IATA) Dangerous Goods Regulations for transport by air; DANGEROUS GOODS. UN No: 1719 Transport Hazard Class: 8 Corrosive Packing Group: II Proper Shipping Name or Technical Name: CAUSTIC ALKALI LIQUID, N.O.S. (CONTAINS PHOSPHORODITHIOIC ACID, O,O-DIBUTYL ESTER, SODIUM SALT) 15. REGULATORY INFORMATION Classification: This material is hazardous according to Safe Work Australia; HAZARDOUS CHEMICAL. Page 6 of 7
7 Classification of the chemical: Flammable liquids - Category 4 Skin Corrosion - Sub-category 1B Eye Damage - Category 1 Skin Sensitisation - Category 1 Carcinogenicity - Category 2 Hazard Statement(s): H227 Combustible liquid. H314 Causes severe skin burns and eye damage. H317 May cause an allergic skin reaction. H351 Suspected of causing cancer. Poisons Schedule (SUSMP): None allocated. All the constituents of this material are listed on the Australian Inventory of Chemical Substances (AICS). 16. OTHER INFORMATION Reason(s) for Issue: 5 Yearly Revised Primary SDS This SDS summarises to our best knowledge at the date of issue, the chemical health and safety hazards of the material and general guidance on how to safely handle the material in the workplace. Since Ixom Operations Pty Ltd cannot anticipate or control the conditions under which the product may be used, each user must, prior to usage, assess and control the risks arising from its use of the material. If clarification or further information is needed, the user should contact their Ixom representative or Ixom Operations Pty Ltd at the contact details on page 1. Ixom Operations Pty Ltd's responsibility for the material as sold is subject to the terms and conditions of sale, a copy of which is available upon request. Page 7 of 7
Level 8, 1 Nicholson Street Melbourne 3000 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: SODIUM HYPOCHLORITE SOLUTION (LESS THAN 5%) Other name(s): Sodium hypochlorite solution 3%; Slimetrol 3%. Recommended Use of the Chemical and
More informationCOPPER DISODIUM EDTA CHELATE. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: COPPER DISODIUM EDTA CHELATE Recommended Use of the Chemical and Restrictions on Use Chelating agent. Supplier: Ixom Operations Pty Ltd ABN:
More informationSodium dibutyl phosphorodithioate. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Other name(s): Sodium dibutyl phosphorodithioate. Recommended Use of the Chemical and Restrictions on Use Supplier: Ixom Operations Pty Ltd ABN: 51 600 546
More informationLevel 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: IXOSURF LA8 Recommended Use of the Chemical and Restrictions on Use Surfactant. Supplier: Ixom Operations Pty Ltd ABN: 51 600 546 512 Street
More informationEXPANDABLE GRAPHITE. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: EXPANDABLE GRAPHITE Recommended Use of the Chemical and Restrictions on Use Man-made graphite. Supplier: Ixom Operations Pty Ltd ABN: 51 600
More informationAnimal feed supplement. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): DICALCIUM PHOSPHATE DCP; Phosphoric acid, calcium salt (1:1); Calcium phosphate dibasic. Recommended Use of the Chemical and
More informationLevel 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: PHOSPHOROUS ACID Recommended Use of the Chemical and Restrictions on Use General chemical. Supplier: Ixom Operations Pty Ltd ABN: 51 600 546
More informationLevel 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): EXACOL CARMOISINE C.I. Food Red 3; C.I. 14720; Eurocert Carmoisine; Edicol Carmoisine; Permicol Carmoisine Recommended Use of
More informationALINCO X LINSEED OIL. House paints, enamels, flat wall finishes,varnishes, printing inks.
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): ALINCO X LINSEED OIL Heat polymerized refined linseed oil; Alinco Y; Linseed heat bodied oil; Linseed stand oil. Recommended
More informationPARAFFIN WAX. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: PARAFFIN WAX Other name(s): White petroleum; Soft white paraffin; Paraffin wax 56/58; Paraffin wax 5860. Recommended Use of the Chemical and
More informationLevel 8, 1 Nicholson Street Melbourne 3000 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Other name(s): 3% Sodium carbonate liquid; Soda ash liquid 3%; 5% Sodium carbonate liquid; Soda ash liquid 5%; 7.5% Sodium carbonate liquid; Soda ash liquid
More informationPROACTIVE GLASS CLEANER
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended Use: PROACTIVE GLASS CLEANER Glass cleaner. Supplier: Selleys Australia, a division of DuluxGroup (Australia) Pty Ltd ABN: 67 000
More informationEDTA TETRASODIUM SALT. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): EDTA TETRASODIUM SALT Tetrasodium edetate tetrahydrate; Ethylene diamine tetraacetic acid, tetrasodium salt, tetrahydrate. Recommended
More informationFLUON PTFE (ALL GRADES) Polytetrafluoroethylene; poly(tetrafluoroethylene). Production of moulded articles (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): Recommended use of the chemical and restrictions on use: FLUON PTFE (ALL GRADES) Polytetrafluoroethylene; poly(tetrafluoroethylene).
More informationSOYA LECITHIN. Emulsifier; dispersant; antioxidant; food additive. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): SOYA LECITHIN Soyabean lecithin; Soya lecithin bleached; Lecithin; Natural fluid lecithin; Yelkin SS; Centrol 2F-SB; Solec 3F-SB;
More informationChemical process industry. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): MAGNESIUM HYDROXIDE Magnesia magma * Magnesium hydrate * Milk of magnesia * Brucite Recommended Use of the Chemical and Restrictions
More informationC.I. Solvent Orange 60; Waxoline Orange 3GP FWN. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): WAXOLINE ORANGE 3GP FW C.I. Solvent Orange 60; Waxoline Orange 3GP FWN. Recommended Use of the Chemical and Restrictions on Use
More informationMAKON TSP-16. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: MAKON TSP-16 Recommended Use of the Chemical and Restrictions on Use Surfactant. For industrial use only. Supplier: Ixom Operations Pty Ltd
More informationSODIUM SULPHIDE. Sodium sulfide hydrated; Sulphide of Soda hydrated. For industrial use to precipitate metals from solution.
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): SODIUM SULPHIDE Sodium sulfide hydrated; Sulphide of Soda hydrated. Recommended Use of the Chemical and Restrictions on Use For
More information12-HYDROXYSTEARIC ACID. Lubricant and chemical intermediate (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): Recommended use of the chemical and restrictions on use: 12-HYDROXYSTEARIC ACID 12-Hydroxyoctadecanoic acid (All grades) Lubricant
More informationLevel 8, 1 Nicholson Street, Melbourne 3000 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): Recommended use of the chemical and restrictions on use: TETRASODIUM PYROPHOSPHATE, ANHYDROUS Sodium pyrophosphate, anhydrous;
More informationWINNOFIL COATED. Construction materials additives; Lubricant; Thickening agent. Level 8, 1 Nicholson Street Melbourne 3000 Australia
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): WINNOFIL COATED Winnofil S; Winnofil SPM; Winnofil SPT; Winnofil SPT Premium; Winnofil FX. Recommended Use of the Chemical and
More informationSODIUM METABISULPHITE (ALL GRADES) Preservative for foods; antioxidant. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): SODIUM METABISULPHITE (ALL GRADES) Sodium metabisulfite; Sodium pyrosulphite; Disodium pyrosulphite; SMB powder; Grape guards;
More informationSUPER KLEEN MULTI-PURPOSE
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended Use: SUPER KLEEN MULTI-PURPOSE Multi-purpose cleaner for household applications. Supplier: Selleys Australia, a division of DuluxGroup
More informationSODIUM DIMETHYL DITHIOCARBAMATE. Fungicide, corrosion inhibitor, rubber accelerator (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended use of the chemical and restrictions on use: SODIUM DIMETHYL DITHIOCARBAMATE Fungicide, corrosion inhibitor, rubber accelerator.
More informationWAXOLINE VIOLET A-FW (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended use of the chemical and restrictions on use: WAXOLINE VIOLET A-FW Dyestuff. Supplier: Orica Australia Pty Ltd ABN: 99 004 117 828
More informationCMX RENDER. Irritating to respiratory system and skin. Risk of serious damage to eyes.
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended Use: 193-85840 CMX RENDER Cementitious masonry render. Applied by trowel. Supplier: Dulux Australia, a division of DuluxGroup (Australia)
More informationWide variety of industrial, chemical and food related applications. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): SODIUM BICARBONATE (ALL GRADES) Sodium hydrogen carbonate; Baking soda; Bicarbonate of soda; Sodium acid carbonate; Bicarbonato
More informationLubricant, personal hygiene, stabiliser Browns Road Noble Park, Victoria 3174
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: STEARIC ACID Recommended Use of the Chemical and Restrictions on Use Lubricant, personal hygiene, stabiliser. Supplier: MARPLEX AUSTRALIA PTY
More informationOil well drilling fluid additive. Defoamer. Level 8, 1 Nicholson Street, Melbourne 3000 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): Recommended use of the chemical and restrictions on use: ALUMINIUM STEARATE Aluminium tristearate; Stearic acid, aluminium salt;
More informationCALCIUM CHLORIDE. Accelerator, adsobant, anti-freeze, mould inhibitor, food additive.
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: CALCIUM CHLORIDE Recommended Use of the Chemical and Restrictions on Use Supplier: Ixom Operations Pty Ltd ABN: 51 600 546 512 Street Address:
More informationPEARL CAUSTIC SODA. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): PEARL CAUSTIC SODA Sodium hydroxide; Soda lye; Sodium hydrate; White caustic; Caustic soda solid; Caustic pearl; Solid caustic
More informationFERRIC CHLORIDE SOLUTION. For metal etching and effluent treatment. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): FERRIC CHLORIDE SOLUTION Ferric chloride liquor. Recommended Use of the Chemical and Restrictions on Use For metal etching and
More informationFood additive for stock foods (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: L-LYSINE 98.5% HCL FEED GRADE Recommended Use of the Chemical and Restrictions on Use Food additive for stock foods. Supplier: Ixom Operations
More informationIn paints, adhesives, plastics, and rubber industries (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Other name(s): Recommended use of the chemical and restrictions on use: T38A; T63A; T63B. In paints, adhesives, plastics, and rubber industries. Supplier:
More informationAdditive for paint resin. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: BENZOIN Recommended Use of the Chemical and Restrictions on Use Additive for paint resin. Supplier: Ixom Operations Pty Ltd ABN: 51 600 546
More informationLevel 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): SODIUM PERCARBONATE Sodium carbonate peroxyhydrate; PCS; Sodium carbonate peroxide. Recommended Use of the Chemical and Restrictions
More informationComplexing agent for the chemical industry. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): TRILON B POWDER Tetrasodium edetate; Ethylene diamine tetraacetic acid, tetrasodium salt. Recommended Use of the Chemical and
More informationGRAPHITE (ALL GRADES)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: GRAPHITE (ALL GRADES) Other name(s): Carbon raiser * Grozier's graphite 177 * Graphite GP65 * Graphite A65R * GRAPELL-20 * GRAPELL-1000 * Recarburiser
More information(ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended use of the chemical and restrictions on use: ALUMINIUM CHLOROHYDRATE 50% SOLUTION Cosmetic ingredient. Supplier: Bronson & Jacobs
More informationSurface coating. Applied by brush, roller or spray (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended use of the chemical and restrictions on use: 191-94607 HADRIAN TEXTURE COATING ROLL ON FINE TINT Surface coating. Applied by brush,
More informationFERRIC SULPHATE SOLID. Coagulant in water treatment applications. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): FERRIC SULPHATE SOLID Ferric sulfate solid; Solid ferric sulphate; Solid ferric sulfate; Iron (III) sulphate. Recommended Use
More informationNonionic surfactant, Emulsifier, Detergent. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: IXOSURF OP8 Recommended Use of the Chemical and Restrictions on Use Nonionic surfactant, Emulsifier, Detergent. Supplier: Ixom Operations Pty
More informationSULPHUR POWDER. Rubber industries, pesticides, fireworks. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): SULPHUR POWDER Sulfur powder; Atomic sulphur; Dusting sulphur; Sulphur MC2; Sulphur MC2 Oiled. Recommended Use of the Chemical
More informationIsopropyl ethyl thiocarbamate; IPETC. Mineral flotation collector. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Other name(s): Isopropyl ethyl thiocarbamate; IPETC. Recommended Use of the Chemical and Restrictions on Use Mineral flotation collector. Supplier: Ixom Operations
More informationNTA TRISODIUM SALT. Nitrilo triacetic acid, trisodium salt. Complexing agent for the chemical industry.
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): NTA TRISODIUM SALT Nitrilo triacetic acid, trisodium salt. Recommended Use of the Chemical and Restrictions on Use Complexing
More informationCITRIC ACID MONOHYDRATE (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended use of the chemical and restrictions on use: CITRIC ACID MONOHYDRATE General chemical. Supplier: Bronson & Jacobs Pty Ltd ABN: 81
More informationCABOTS DECK CLEAN (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended use of the chemical and restrictions on use: 918-82195 CABOTS DECK CLEAN Timber cleaner. Supplier: Cabot's Australia, a division
More informationMONOSODIUM PHOSPHATE ANHYDROUS. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): MONOSODIUM PHOSPHATE ANHYDROUS Sodium phosphate monobasic; Sodium dihydrogen phosphate; Sodium dihydro orthophosphate; Sodium
More informationPOLYGLAZE INVISIBLE GLASS CLEANER. Selleys Australia, a division of DuluxGroup (Australia) Pty Ltd ABN:
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended Use: POLYGLAZE INVISIBLE GLASS CLEANER Glass cleaner. Supplier: Selleys Australia, a division of DuluxGroup (Australia) Pty Ltd
More informationRaw material for the chemical-technical industry. Organic Crop Protectants Pty Ltd Turrella Street TURRELLA NSW 2205 Australia
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: HYDRASOIL Recommended Use of the Chemical and Restrictions on Use Raw material for the chemical-technical industry. Supplier: ABN: Street Address:
More informationSPAKFILLA QUICK SET POWDER (INTERIOR) Rigid filler for interior plaster, masonary and timber (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended use of the chemical and restrictions on use: SPAKFILLA QUICK SET POWDER (INTERIOR) Rigid filler for interior plaster, masonary and
More informationDulux Australia, a division of DuluxGroup (Australia) Pty Ltd ABN:
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended Use: 663-89936 DULUX QUIT RUST RUST REMOVER Rust remover. Supplier: Dulux Australia, a division of DuluxGroup (Australia) Pty Ltd
More information(ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): Recommended use of the chemical and restrictions on use: DTPMP.Na7 Heptasodium salt of diethylene triamine penta(methylene phosphonic
More informationACTIVATED BLEACHING EARTH. Food chemical/additive.
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: ACTIVATED BLEACHING EARTH Recommended Use of the Chemical and Restrictions on Use Food chemical/additive. Supplier: Ixom Operations Pty Ltd
More informationPharmaceutical applications. Ixom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address:
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): COD LIVER OIL Cod Liver Oil BP; Cod Liver Oil VET; Cod Liver Oil BP (NO R/PK); AAOIL00240 Recommended Use of the Chemical and
More informationTURTLE WAX F21 WHEEL CLEANER
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended Use: TURTLE WAX F21 WHEEL CLEANER All surface wheel cleaner. Supplier: Selleys Australia, a division of DuluxGroup (Australia) Pty
More informationSODIUM METASILICATE ANHYDROUS. For the formulation of detergents and cleaners. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): SODIUM METASILICATE ANHYDROUS Disodium trioxosilicate Recommended Use of the Chemical and Restrictions on Use For the formulation
More informationN-ACETYL-L-CYSTEINE. Pharmaceutical; food; chemical ingredient.
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: N-ACETYL-L-CYSTEINE Recommended Use of the Chemical and Restrictions on Use Pharmaceutical; food; chemical ingredient. Supplier: Ixom Operations
More informationPolyglycerol polyricinoleate. Ixom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address:
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Other name(s): Polyglycerol polyricinoleate Recommended Use of the Chemical and Restrictions on Use Food additive. Supplier: Ixom Operations Pty Ltd (Bronson
More informationGeneral chemical. The weight ratio for SiO2/Na2O is (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Recommended Use of the Chemical and Restrictions on Use General chemical. The weight ratio for SiO2/Na2O is 3.22 Supplier: Ixom Operations Pty Ltd (Incorporated
More informationLevel 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: IXOSURF NP9 Recommended Use of the Chemical and Restrictions on Use Surfactant. Supplier: Ixom Operations Pty Ltd ABN: 51 600 546 512 Street
More informationSODIUM THIOCYANATE. Analytical reagent, dyeing and printing textiles, general chemical.
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): SODIUM THIOCYANATE Rhodanate; Sodium sulphocyanide; Thiocyanic acid, sodium salt; Sodium rhodanide. Recommended Use of the Chemical
More informationLipopeg 2-DL; Westwood Emulsifier; STEPAN PEG 400 DL
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): POLYETHYLENE GLYCOL DILAURATE Lipopeg 2-DL; Westwood Emulsifier; STEPAN PEG 400 DL Recommended Use of the Chemical and Restrictions
More informationPARFIX PVA ADHESIVE (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended use of the chemical and restrictions on use: Supplier: Street Address: PARFIX PVA ADHESIVE Wood and paper glue. DuluxGroup (New
More informationAromatic and cosmetic applications.
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: JOJOBA OIL Other name(s): Jojoba Oil Pure; Jojoba Oil Refined; Jojoba Oil Golden Pure; DW Jojoba Golden; Lipovol J; Jojoba Oil Colorless Organic;
More informationMaterial Safety Data Sheet
This material is hazardous according to criteria of NOHSC. Classified as Dangerous Goods by the criteria of the Australian Dangerous Goods Code (ADG Code) for Transport by Road and Rail. 1. Identification
More information0.1M SODIUM HYDROXIDE (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): 0.1M SODIUM HYDROXIDE 0.1N NaOH Recommended Use of the Chemical and Restrictions on Use Lab reagent. Supplier: Ixom Operations
More information0.1M HYDROCHLORIC ACID (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): 0.1M HYDROCHLORIC ACID 0.1N HCl Recommended Use of the Chemical and Restrictions on Use Lab reagent. Supplier: Ixom Operations
More informationGROUT STAIN WHITENER. For advice, contact a Poisons Information Centre (e.g. phone Australia ; New Zealand ) or a doctor.
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended Use: GROUT STAIN WHITENER Whitener for grout stains. Supplier: Selleys Australia, a division of DuluxGroup (Australia) Pty Ltd ABN:
More informationBased on available information, not classified as hazardous according to criteria of Safe Work Australia; NON-HAZARDOUS SUBSTANCE.
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Recommended Use: Glass cleaner. Supplier: Selleys Australia, a division of DuluxGroup (Australia) Pty Ltd ABN: 67 000 049 427 Street Address: 1 Gow Street,
More informationLUTENSOL AO11. Raw material for the chemical-technical industry. Level 8, 1 Nicholson Street Melbourne 3000 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: LUTENSOL AO11 Recommended Use of the Chemical and Restrictions on Use Raw material for the chemical-technical industry. Supplier: Ixom Operations
More informationOVEN PLUS HEAVY DUTY GEL (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended use of the chemical and restrictions on use: OVEN PLUS HEAVY DUTY GEL Oven cleaner. Supplier: Selleys Australia, a division of DuluxGroup
More informationSODIUM SULPHITE (20% W/V) (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: SODIUM SULPHITE (20% W/V) Recommended Use of the Chemical and Restrictions on Use Corrosion inhibitor. To prevent brightness reversion in highly
More informationMaterial Safety Data Sheet
Hazardous Substance, NON-Dangerous Goods Duron Primer/Sealer Water-based Epoxy Part A 1. MATERIAL AND SUPPLY COMPANY IDENTIFICATION Product name: Duron Primer/Sealer Water-based Epoxy Part A Recommended
More informationMaterial Safety Data Sheet
NON-Hazardous Substance, NON-Dangerous Goods 1. MATERIAL AND SUPPLY COMPANY IDENTIFICATION Product name: Bostik 6303 Hot Melt Glue Sticks 380mm - Yellow Synonyms: Mancode Bostik 6303 Hot Melt Glue Sticks
More informationRaw material for the chemical-technical industry. Level 8, 1 Nicholson Street Melbourne 3000 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Recommended Use of the Chemical and Restrictions on Use Raw material for the chemical-technical industry. Supplier: Ixom Operations Pty Ltd ABN: 51 600 546
More informationPolyethylene glycol 400; PEG400. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: PEG 400 Other name(s): Polyethylene glycol 400; PEG400. Recommended Use of the Chemical and Restrictions on Use Supplier: Ixom Operations Pty
More informationPlasticiser for use in PVC and PVC copolymers. Level 8, 1 Nicholson Street Melbourne 3000 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): PALATINOL N DINP; Diisononyl phthalate; 1,2-Benzenedicarboxylic acid, diisononyl ester. Recommended Use of the Chemical and Restrictions
More information(ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended use of the chemical and restrictions on use: POTASSIUM METABISULPHITE Preservative. Supplier: Bronson & Jacobs Pty Ltd ABN: 81 000
More information(ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Other name(s): Sodium hydroxide 1N; Caustic soda 1.0N; Caustic soda 1N. Recommended use of the chemical and restrictions on use: Laboratory reagent. Supplier:
More informationDulux Australia, a division of DuluxGroup (Australia) Pty Ltd ABN:
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended Use: 195-85684 DULUX ACRATEX FULL COVER Surface coating. Supplier: Dulux Australia, a division of DuluxGroup (Australia) Pty Ltd
More informationCONSTRUCTION ADHESIVE
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended Use: LIQUID NAILS PRESS N GO HIGH STRENGTH Waterbased adhesive packed as an aerosol. Supplier: Selleys Australia, a division of
More informationSASSAFRAS OIL. Ixom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address:
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): SASSAFRAS OIL AAOIL00763 Recommended Use of the Chemical and Restrictions on Use Essential oil. Supplier: Ixom Operations Pty
More informationCETCO SHORE PAC. Copolymer of sodium acrylate and acrylamide (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended use of the chemical and restrictions on use: CETCO SHORE PAC Copolymer of sodium acrylate and acrylamide. Supplier: Ixom Operations
More informationCERECLOR A42. Extreme pressure additive. Plasticiser in paint applications. Level 8, 1 Nicholson Street Melbourne 3000 Australia
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): CERECLOR A42 C22-30 Chlorinated paraffin (chlorination 42%), 42% Chlorinated paraffin Recommended Use of the Chemical and Restrictions
More informationRaw material for the chemical-technical industry. Level 8, 1 Nicholson Street Melbourne 3000 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: LUTENSOL AO 8 Recommended Use of the Chemical and Restrictions on Use Raw material for the chemical-technical industry. Supplier: Ixom Operations
More informationIxom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address: (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: TRIVALIN SF Recommended Use of the Chemical and Restrictions on Use Cosmetic applications. Supplier: Ixom Operations Pty Ltd (Bronson & Jacobs
More informationIxom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address: (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): EXT. D&C VIOLET NO.2 C.I. 60730-External D&C Violet #2;External D&C Violet #2; Acid Violet 43; Alizarine Violet; Violet #2 K7116;
More informationCETCO SHOREPAC RICCARTON STOP (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended use of the chemical and restrictions on use: CETCO SHOREPAC RICCARTON STOP General chemical. Supplier: Ixom Operations Pty Ltd (Incorporated
More informationIxom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address: (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): LIPOCOL HCO-40 Cremophor RH 40; Cremophor RH 60 Surfactant; Cremophor CO 40 Surfactant; Lipocol HCO-60 Recommended Use of the
More informationFLORENTINE HARDENER TRAPANI. Dulux New Zealand, a division of DuluxGroup (New Zealand) Pty Ltd ABN Co.
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended Use: 193-85709 FLORENTINE HARDENER TRAPANI Cementitious masonry render. Applied by trowel. Supplier: Dulux New Zealand, a division
More informationINTERGRAIN REVIVA
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended Use: 552-94814 INTERGRAIN REVIVA Timber cleaner. Supplier: Cabot's Australia, a division of DuluxGroup (Australia) Pty Ltd ABN:
More informationNot classified as a Dangerous Good under NZS 5433:2007 Transport of Dangerous Goods on Land.
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Recommended Use: Oven, BBQ, grill and hotplate cleaner. Supplier: Street Address: Selleys - A Division of ORICA NEW ZEALAND LIMITED The Gate Industrial Park,
More informationIxom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address: (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): DISTILLED TOPPED HARDENED COCONUT OIL FATTY ACID Coconut Fatty Acids Recommended Use of the Chemical and Restrictions on Use
More informationPARFIX BATHROOM AND KITCHEN
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended Use: PARFIX BATHROOM AND KITCHEN Silicone sealant for use on most common building materials. Supplier: DuluxGroup (Australia) Pty
More informationIxom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address: (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): AMARANTH United Colours Amaranth Dye Powder; United Colours Amaranth Granular; Amaranth Colour C309; Exacol Amaranth; Exagran
More informationBased on available information, not classified as hazardous according to criteria of Safe Work Australia; NON-HAZARDOUS SUBSTANCE.
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended Use: PRO-SPEC FLEXI-FILL ACRYLIC SEALANT - Interior/exterior flexible gap sealant. Supplier: Selleys Australia, a division of DuluxGroup
More informationMaterial Safety Data Sheet
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): Recommended Use: POOLCARB*, SODIUM BICARBONATE Sodium hydrogen carbonate; Baking soda; Bicarbonate of soda; Sodium acid carbonate.
More informationPOLYGLAZE SPARKLING CAR WASH (PG01) Selleys Australia, a division of DuluxGroup (Australia) Pty Ltd ABN:
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended Use: POLYGLAZE SPARKLING CAR WASH (PG01) Car wash. Supplier: Selleys Australia, a division of DuluxGroup (Australia) Pty Ltd ABN:
More information