Safety Data Sheet according to (EC) No 1907/ ISO

Transcription

1 Safety Data Sheet according to (EC) No 1907/ ISO Page 1 of 1 PC21A LIQUID FLUX sds no. : Revision: printing date: Identification of the substance/preparation and of the company/undertaking Trade name: PC21A LIQUID FLUX Intended use: Liquid Flux Company name: Henkel Limited Technologies House Wood Lane End HP2 4RQ Hemel Hempstead Great Britain Phone: +44 (0) Fax-no.: +44 (0) address of person responsible for Safety Data Sheet: ua-productsafety.uk@uk.henkel.com Emergency information: 24 Hours Emergency Tel: +44 (0) Hazards identification R11 Highly flammable. R36 Irritating to eyes. R43 May cause sensitisation by skin contact. R67 Vapours may cause drowsiness and dizziness. Fumes evolved at soldering temperatures will irritate the nose, throat and lungs. Prolonged or repeated exposure to flux fumes may result in sensitisation in sensitive workers. 3. Composition / information on ingredients Declaration of ingredients according to (EC) No 1907/2006: Hazardous components CAS-No. Propan-2-ol Rosin EINECS ELINCS content Classification % Xi - Irritant; R36 F - Highly flammable; R11 R % R43 For full text of the R-Phrases indicated by codes see section 16 'Other Information'. Substances without classification may have community workplace exposure limits available.

2 PC21A LIQUID FLUX Page 2 of 2 4. First aid measures Inhalation: Move to fresh air. If symptoms persist, seek medical advice. Skin contact: Rinse with running water and soap. Obtain medical attention if irritation persists. Eye contact: Rinse immediately with plenty of running water (for 10 minutes). Seek medical attention if necessary. Ingestion: Do not induce vomiting. Seek medical advice. Suitable extinguishing media: Alcohol-resistant foam. 5. Fire fighting measures Special protection equipment for firefighters: Wear self-contained breathing apparatus. Special hazards by the product itself: Can form explosive gas/air mixtures. Hazardous combustion products: Oxides of carbon. Thermal decomposition can lead to release of irritating gases and vapors. Personal precautions: Avoid contact with skin and eyes. Wear protective equipment. Environmental precautions: Do not let product enter drains. Prevent further leakage or spillage if safe to do so. 6. Accidental release measures Clean-up methods: Remove all sources of ignition. For small spills wipe up with paper towel and place in container for disposal. For large spills absorb onto inert absorbent material and place in sealed container for disposal. 7. Handling and storage Handling: Use only in well-ventilated areas. Keep away from sources of ignition - no smoking. Wear suitable protective clothing, safety glasses and gloves. Wash hands before breaks and immediately after handling the product. Take measures to prevent the build-up of electrostatic charges. Storage: Store in a cool, well-ventilated place. Keep away from sources of ignition.

3 PC21A LIQUID FLUX Page 3 of 3 8. Exposure controls / personal protection Components with specific control parameters for workplace: Valid for Great Britain Basis UK s Ingredient ppm mg/m3 Type Category Remarks PROPAN-2-OL Time Weighted Average (TWA). PROPAN-2-OL Short Term Exposure Limit (STEL): ROSIN-BASED SOLDER FLUX FUME 0,05 Time Weighted Average (TWA). ROSIN-BASED SOLDER FLUX FUME 0,15 Short Term Exposure Limit (STEL): Colophony (Rosin) and derivatives: Rosin-based flux fume as total resin acids. Engineering controls: Ensure adequate ventilation, especially in confined areas. Where reasonably practicable this should be achieved by the use of local exhaust ventilation and good general extraction. Extraction is necessary to remove fumes evolved during reflow. Respiratory protection: In case of insufficient ventilation, wear suitable respiratory equipment. Hand protection: Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): nitrile rubber (R; >= 0.4 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): nitrile rubber (R; >= 0.4 mm thickness) This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g. temperature). If signs of wear and tear are noticed then the gloves should be replaced. Eye protection: Safety glasses with sideshields or chemical safety goggles should be worn if there is a risk of splashing. 9. Physical and chemical properties General characteristics: Appearance Odor: liquid Amber alcohol-like Phys./chem. properties: ph-value Boiling point Flash point Vapor pressure (25,0 C (77 F)) Density (25 C (77 F)) Solubility (qualitative) (Solvent: Water) Explosion limit lower [vol%] not applicable 82,0 C (179.6 F) 12,0 C (53.6 F) 6,6 kpa 0,880 g/cm3 Partially miscible 2,00 %(V)

4 PC21A LIQUID FLUX Page 4 of 3 upper [vol%] Octanol/Water distribution coefficient Vapor density: VOC content (1999/13/EC) 12,00 %(V) Not determined Heavier than air % 10. Stability and reactivity Conditions to avoid: Stable Materials to avoid: Reaction with strong oxidants. Dissolves aluminium and zinc slowly with formation of hydrogen. Hazardous decomposition products: Thermal decomposition can lead to release of irritating gases and vapors. 11. Toxicological information Oral toxicity: May cause irritation to the digestive tract. Ingestion of large quantities may cause liver or kidney damage. Inhalative toxicity: Inhalation of high vapor concentrations may cause symptoms like headache, dizziness, tiredness, nausea and vomiting. Fumes evolved at soldering temperatures will irritate the nose, throat and lungs. Prolonged or repeated exposure to flux fumes may result in sensitisation in sensitive workers. Skin irritation: Prolonged or repeated contact may cause skin irritation. May cause sensitization by skin contact. Eye irritation: Irritating to eyes. Liquid may cause conjunctival irritation. Sensitizing: May cause sensitization by skin contact. Ecotoxicity: Do not empty into drains / surface water / ground water. 12. Ecological information Bioaccumulative potential: Octanol/Water distribution coefficient: Not determined Ecotoxicity: Hazardous components CAS-No. Rosin Species Exposure Value Value time type Fathead minnow (Pimephales promelas) 96 h LC 50 > mg/l General ecological information: Propan-2-ol: LC50/96h/Fathead minnows = 1000 mg/l EC50/24h/Daphnia = 9714 mg/l 13. Disposal considerations Product disposal: Dispose of as hazardous waste in compliance with local and national regulations. Incineration under controlled conditions is recommended.

5 PC21A LIQUID FLUX Page 5 of 5 Waste code(ewc ): other solvents and solvent mixtures Disposal of uncleaned packages: Dispose of as unused product. Road transport ADR: 14. Transport information Classification code: F1 Hazard ident. number: 33 Technical name: Tunnelcode: (D/E) Railroad transport RID: Classification code: F1 Hazard ident. number: 33 Technical name: Tunnelcode: Inland water transport ADN: Classification code: F1 Hazard ident. number: Technical name: Marine transport IMDG: EmS: F-E,S-D Seawater pollutant: - Proper shipping name: Air transport IATA: Packaging instructions (passenger) 305 Packaging instructions (cargo) 307 Proper shipping name: Isopropanol (solution)

6 PC21A LIQUID FLUX Page 6 of Regulations - classification and identification Indication of danger: Xi - Irritant F - Highly flammable Contains Rosin Risk phrases: R11 Highly flammable. R36 Irritating to eyes. R43 May cause sensitisation by skin contact. R67 Vapours may cause drowsiness and dizziness. Safety phrases: S16 Keep away from sources of ignition - No smoking. S24 Avoid contact with skin. S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S37 Wear suitable gloves. S51 Use only in well-ventilated areas. Additional information: When heated fumes may cause sensitisation by inhalation. National regulations/information (Great Britain): Remarks The Health & Safety at Work Act The Control of Substances Hazardous to Health Regulations. L5:General Approved Code of Practice to the COSHH Regulations. HS(G)97:A Step by Step Guide to the COSHH Regulations. HS(G)193:COSHH essentials: Easy steps to control chemicals. HS(G)51:The Storage of Highly Flammable Liquids in Containers. HS(G)140:The Safe Use and Handling of Highly Flammable Liquids EH9:The Spraying of Highly Flammable Liquids.

7 PC21A LIQUID FLUX Page 7 of Other information The labelling of the product is indicated in Section 15. The full text of the R-phrases indicted by codes in this safety data sheet are as follows: R11 Highly flammable. R36 Irritating to eyes. R43 May cause sensitisation by skin contact. R67 Vapours may cause drowsiness and dizziness. Further information: This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe our products from the point of view of safety requirements and is not intended to guarantee any particular properties. This safety data sheet was prepared in accordance with Council Directive 67/548/EEC and it's subsequent amendments, and Commission Directive 1999/45/EC.