Cooler-Bypass Thermostat Valve, Size 16

Transcription

1 Cooler-Bypass hermostat Valve, Size Q max = l/min, p max = bar emperature-controlled, integral relief function, various pressure settings available Description emperature-dependent bypass control Integral pressure-relief function Oil warms up rapidly (cold-start phase) Direct-mounted in coolers or manifold blocks High flow rates Low headloss Various pressure settings available Very good reproducibility Extremely reliable Very stable operation All exposed parts with zinc-nickel plating Can be fitted in a line-mounting body hese direct acting bypass thermostat valves are size, temperature controlled, high performance screw-in cartridges with an Mx. mounting thread. hey are intended to be installed directly in coolers or line-mounting body. Depending on the temperature of the oil, they route the flow either straight to tank or through the cooler. When the oil is cold (< C), the connection is open (bypass), which means that the flow is directed to tank with minimal headloss and the oil warms up rapidly. After the changeover temperature is reached (> C), the integral thermostat element closes the connection. he valve now directs the oil flow through the cooler. With an integral pressure-relief function, the bypass thermostat cartridge also safeguards the cooler by protecting it from any pressure peaks that may result from excessive flow rates. he maximum pressure is determined by the model that is selected. he cartridges are predominantly used in coolers in mobile as well as industrial applications. All external parts of the cartridge are zinc-nickel plated to DIN 979 and are thus suitable for use in the harshest operating environments. Symbol s echnical data General characteristics Designation Design Mounting method ightening torque Size Weight Mounting attitude Ambient temperature range Description, value, unit cooler-bypass thermostat valve temperature-controlled, integral relief function, choice of maximum pressure setting screw-in cartridge Mx. Nm ± % size, cavity type KU. kg horizontal design, others installations position give others p-values - C +9 C Reference: --7-EN- Issue:. /

2 Hydraulic characteristics Maximum operating pressure Maximum flow rate Description, value, unit bar l/min Nominal pressure ranges bar, bar, bar or 9 bar (other pressures - consult BUCHER) emperature for start of control action C Flow direction see symbol Hydraulic fluid HL and HL mineral oil to DIN ; for other fluids, please contact BUCHER Hydraulic fluid temperature range - C +9 C Viscosity range mm /s (cst), recommended... mm /s (cst) Minimum fluid cleanliness class /8/ Cleanliness class to ISO : 999 erformance graphs measured with oil viscosity mm /s (cst), mounting position horizontal Dp = f (Q) ressure drop v. temperature [ 9 bar ] 99.ai p = f (Q) ressure drop v. flow rate [ 9 bar ].ai 8 Q = l/min = < C 7 8 [ C] Q [l/min] p = f (Q) ressure drop v. temperature [ bar ] 8.ai p = f (Q) ressure drop v. flow rate [ bar ].ai 8 Q = l/min [ C] = < C Q [l/min] / --7-EN-/.

3 p = f (Q) ressure drop v. temperature [ bar ].ai p = f (Q) ressure drop v. flow rate [ bar ].ai 7, Q = l/min, = < C 7 8 [ C] Q [l/min] p = f (Q) ressure drop v. temperature [ bar ] 9.ai p = f (Q) ressure drop v. flow rate [ bar ] 8.ai... Q = l/min 7 8 [ C] = < C Q [l/min] --7-EN-/. /

4 Dimensions & sectional view hermostat element < C connection open hermostat element > C connection closed Mx. Ma = [Nm] ±% Ø.. (9.7) Installation information IMORAN! When fitting the cartridges, use the specified tightening torque. No adjustments are necessary, since the cartridges are set in the factory. IMORAN! Other mounting position and the axial incident flow from port to valve spool results in other p-values. Seals Item AENION! Only qualified personnel with mechanical skills may carry out any maintenance work. Generally, the only work that should ever be undertaken is to check, and possibly replace, the seals. When changing seals, oil or grease the new seals thoroughly before fitting them. Description O-ring no. 8, x,78 HNBR9 / --7-EN-/.

5 7 Application examples Manifold block with integral cooler-bypass thermostat valve V V WDUVB... s 8 Ordering code Ex. W D UV B J - W = directional valve, cartridge construction D = direct acting = temperature-actuated (thermostat element) UV = pressure-relief function is incorporated B... Q = standard model - see relevant data sheets Z... R = special features - please consult BUCHER = response temperature of thermostat C = for other response temperatures, please consult BUCHER 9 = pressure setting = p max = 9 bar = pressure setting = p max = bar = pressure setting = p max = bar = pressure setting = p max = bar = size J = HNBR seals (standard) (special seals - please contact BUCHER)... 9 = design stage (omit when ordering new units) 9 Related data sheets Reference (Old no.) Description --8 Cavity type KU --7 Line-mounting body, type GEUA (G ) info.ch@bucherhydraulics.com by Bucher Hydraulics AG Frutigen, CH-7 Frutigen All rights reserved. Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. he information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual improvement, we reserve the right to amend the product specifications contained in this catalogue. Classification: EN-/. /