Mini Pod Press. #78H-M2 Mini Pod Press Manual-R1

Size: px
Start display at page:

Download "Mini Pod Press. #78H-M2 Mini Pod Press Manual-R1"

Transcription

1 Mini Pod Press Model - #78H-M2 SN - Year - JLT Clamps 108 Parker Ave. Poughkeepsie, NY Tel: (800) Fax: (845) clampguys@jltclamps.com Web:

2 TABLE OF CONTENTS Table of Contents INTRODUCTION...3 Company Introduction... 4 Limited Warranty... 5 Machine Requirements and Layout... 6 RULES FOR SAFE OPERATION...7 Types of Warnings... 8 General Safety Rules... 9 Machine Safety Decals INSTALLATION...12 Receiving & Unpacking Position the Machine Connecting Air OPERATION...15 Safety & Training Operating Controls Main Disconnect Valve Dial Pressure Regulator(s) Air Lock Valves Adjusting the Platens Loading the Press Applying Pressure Calculating Glue Line Pressure Opening the Press TROUBLESHOOTING...22 Operational Troubleshooting MAINTENANCE...24 Maintenance Checklist PARTS & SERVICE...26 Model & Serial Plate Location Recommended Spare Parts Parts Order Form... 29

3 INTRODUCTION INTRODUCTION INTRODUCTION 3

4 INTRODUCTION Company Introduction We at JLT Clamps would like to thank you and your company for selecting the JLT Mini Pod Press. With proper care, your Mini Pod Press will provide you with many years of reliable service and high quality production. INTRODUCTION This manual contains important information about the installation, operation and maintenance of your Mini Pod Press. We urge you to read it carefully, become familiar with the components and features it describes, and follow its recommendations, to help make your machine as trouble-free and productive as possible. This manual is intended for use by anyone working with this machine. It should be kept available for immediate reference so that all operations can be performed with maximum efficiency and safety. Do not attempt to perform maintenance or operate this machine until you have read and understand the information contained in this manual. 4

5 INTRODUCTION Limited Warranty (This supersedes all previous warranties) JLT Clamps guarantees all products of its manufacture to be free of defects in workmanship or material when properly installed, serviced and maintained under normal conditions. JLT Clamps' obligation under this warranty is limited to repair ing or replacing any part or parts thereof which shall within one (1) year after shipment to the original user, be returned to its factory, transportation charges prepaid, and which JLT Clamps' examination shall disclose to be defective. INTRODUCTION JLT Clamps assumes no liability for labor charges incidental to the adjustment, service, repairing, or removal or replacement of parts or other losses, or for ex pense of repairs made outside of its factory, except when made pursuant to JLT Clamps' PRIOR written consent. JLT CLamps does not guarantee equipment furnished by us, but manufactured by others, such as belts, electric motors, starters, controls or other electrical equip ment or accessories, as they are guaranteed separately by their respective manufacturers. JLT Clamps assumes no liability whatever for any of these parts claimed to be defective or for damages or delays caused by defects beyond making such repair or furnishing duplicate parts within the manufacturer s warranty, nor shall we be liable for any defective material repaired or replaced without our consent. The foregoing shall constitute the fulfillment of all of our obligations under this warranty and there are no other warranties or guarantees, expressed or implied except as stated herein. 5

6 INTRODUCTION Machine Requirements and Layout The Mini Pod Press requires 100 psi air pressure. INTRODUCTION 42 5/8" 85 1/4" 127 7/8" XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX Three Individual Top Platens 10'-8" Platen Single Lower Platen 15" Opening 12" Platen 36" 6'-4" Height XXXX XXXX XXXX XXXX XXXX XXXX 6

7 INTRODUCTION INTRODUCTION Air Connection: 1 100psi ( Bar) Load/Unload Area Operator Control #78H- Lower Platen Height Adjustment #78H- Manual Layout MATERIAL NAME: Description: Created: 1/12/2012 by: Jacob D. Greenfield Modified: 3/7/2012 by: Administrator DWG. NO. #78H- SCALE: 1:20 James L. Taylor Mfg. Co. Poughkeepsie, NY, USA WEIGHT: REV SHEET 1 OF 1 7

8 RULES FOR SAFE OPERATION RULES FOR SAFE OPERATION RULES FOR SAFE OPERATION 8

9 RULES FOR SAFE OPERATION Types of Warnings This is the safety alert symbol. It is used to alert you to potential injury hazards. Obey all safety messages that follow this symbol to avoid possible injury.! RULES FOR SAFE OPERATION DANGER in white letters on a safety red background with a safety red exclamation point. This indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. WARNING in black letters on a safety orange background with a safety orange exclamation point. This indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. CAUTION in black letters on a safety yellow background with a safety yellow exclamation point. This indicates a potentially hazardous situation which, if not avoided, COULD result in minor or moderate injury.!!! DANGER WARNING CAUTION 9

10 RULES FOR SAFE OPERATION General Safety Rules Follow lockout procedure before servicing. Read and understand manual before operating machine. Wear eye protection. See the plant supervisor to determine what protective equipment each job requires. Follow electrical and fire codes. RULES FOR SAFE OPERATION Do not wear loose clothing, jewelry or long hair around operating equipment. Keep guards in protective position when machine is operating. Keep clear of belts, chains, saw blades and moving parts.! DANGER Lockout ALL energy sources before servicing. 10

11 RULES FOR SAFE OPERATION Machine Safety Decals The following warning stickers are used on your machine. Over time, these stickers can become worn and illegible. New stickers can be obtained from: James L. Taylor Mfg. Co. 108 Parker Ave. Poughkeepsie, NY Tel: (845) Fax: (845) RULES FOR SAFE OPERATION Part Number: Description: PLA Read Manual Warning Sticker Location: On the Lower Platen. 11

12 RULES FOR SAFE OPERATION Part Number: Description: Sticker PLA Pinch Point Warning RULES FOR SAFE OPERATION Facing Operator on Up- Location: per Platen Part Number: Description: Sticker PLA.190 Pinch Point Warning Facing Operator on Up- Location: per Platen 12

13 INSTALLATION INSTALLATION INSTALLATION 13

14 INSTALLATION Receiving & Unpacking Inspect the skid and its boxes for shipping damage. If any shipping damage has occurred, notify the shipping company immediately. The Mini Pod Press has been quality inspected and tested at our factory. INSTALLATION 14

15 INSTALLATION Position the Machine Move the machine off the skid and position it in a flat, level area. Make sure all four corners of the foot pads rest securely on the floor so the machine doesn't rock. Make sure the operator controls are easily accessible and that there is plenty of room for getting material into and out of the press. Connecting Air Connect an air line to the main shutoff valve provided. The Mini Pod Press requires 100 psi air. It will work at lower air pressures, but it won't generate full clamping pressure. Make sure your air supply never surpasses 120 psi, or the machine may be damaged. If your air pressure surpasses 120 psi, install an air pressure regulator before the Mini Pod Press. INSTALLATION 15

16 INSTALLATION Dismantling To dismantle the machine, reverse the Installation (Assembly) instructions. Resell or dispose of the components according to your local regulations. INSTALLATION 16

17 OPERATION OPERATION OPERATION 17

18 Safety & Training OPERATION According to many OSHA, ANSI, STATE, and LOCAL CODES it is the EMPLOYER'S RE- SPONSIBILITY to: Permit only trained and authorized employees to operate equipment. Inspect and maintain guards, safety devices, and start/stop controls. Instruct, train, and supervise the safe method of work! Be sure personnel are properly trained and safety rules are clearly understood before operating or performing maintenance! OPERATION 18

19 OPERATION Operating Controls The following are the necessary controls for the general operation of the Mini Pod Press. Familiarize yourself with the location, operation, and purpose of each control before proceeding to operate the machine. Main Disconnect Valve Located on side of the machine. Rotate the handle on this valve to supply air to the system or exhaust the air in the system. Keep in mind that to exhaust all air from the system, the Air Lock Valve(s) also need to be opened (see below). Dial Pressure Regulator(s) Single station presses have a single dial pressure regulator. Larger machines have independent dial regulators for each upper platen. These regulators should be used for the primary operation of the machine. To energize the upper platen, dial the regulator to the desired pressure (see chart in a later section). The higher the dial is set, the higher the force generated. OPERATION To release the press pressure, dial the regulator back to zero. 19

20 OPERATION Air Lock Valves Each dial regulator is accompanied by an air lock valve. Under normal operation, these valves will not be used. When a press is going to remain energized over night, these valves can be energized to trap the air in the machine regardless of whether the air supply is cut off (the air compressor is shut down for the night). Cylinder Shutoff Valves Each cylinder is accompanied by an air shut off valve. These valves are used to turn off air cylinders that are not needed for a particular clamping job. Specifically, you should use these valves when there is no material below a particular cylinder. Failure to use these valves could result in damage to your product and/or your machine. OPERATION Adjusting the Platens Both the upper and lower platens are vertically adjustable to accommodate a wide range of laminating projects. Platen adjustment is designed for quick changeovers. To adjust the lower platen, first make sure that the lifting mechanism is properly supporting the weight of the lower platen. Next, remove the bolts attaching the platen to the machine frame. Reposition the platen using the adjusting mechanism. Note that you may need to change the position of the lower pin multiple times if you are making a large adjustment. Reinstall and fully tighten all of the bolts. Open Closed 20

21 OPERATION Using a forklift, you can also adjust the height of the upper platens if desired. OPERATION Loading the Press When loading the press, make sure to center the material on the platens. Failure to do so will result in uneven clamping pressure and may damage the machine. To simplify the loading of longer machines, it may be desirable to place a simple roller conveyor at the end of the machine. Material can be laid up on the conveyor, then rolled into the press. 21

22 OPERATION The upper platen has a stroke of 2 1/4" and achieves maximum force toward the middle of this stroke. It is best to load the machine so that there is around 1" of clearance between the material and the upper platen before the pressure is applied. Applying Pressure To apply clamping pressure, slowly turn the dial pressure regulator in the clockwise direction. Continue to turn the regulator until the upper platen begins to move and then makes contact with the material to be glued. Continue to turn the regulator until the desired glue line pressure is achieved (see below). Calculating Glue Line Pressure Glue manufacturers will recommend a particular glue line pressure for their glues. They typically recommend pressures that are higher than necessary for materials that are properly prepared. This being said, their numbers are often a good starting point. OPERATION The air pressure shown on the dial regulator is not the same as the glue line pressure. To calculate glue line pressure, you need to know the surface area of the material 22

23 OPERATION you are gluing. If the material being glued is 36" long by 6" wide, then the surface area is 36" times 6", or 215 square inches. This is the surface area regardless of how many pieces are stacked. You also need to know the total force generated by the press. Use the chart at the right to determine the press force for a particular dial regulator setting. To calculate the glue line pressure, divide the total press force by the material surface area. To work backward, start with the recommended glue line pressure. Multiply this by the material surface area to get the total force required. Use the chart at the right to determine the proper dial regulator setting. Opening the Press OPERATION To open the press, turn the dial regulator all the way counter clockwise. 23

24 TROUBLESHOOTING TROUBLESHOOTING TROUBLESHOOTING 24

25 TROUBLESHOOTING Operational Troubleshooting Problem Solution. TROUBLESHOOTING 25

26 MAINTENANCE MAINTENANCE MAINTENANCE 26

27 Maintenance Checklist (Photocopy for use) MAINTENANCE Comments Date Initials Daily Maintenance Checklist Monthly Maintenance Checklist MAINTENANCE "Three Month" Maintenance Checklist 27

28 PARTS & SERVICE PARTS & SERVICE PARTS & SERVICE 28

29 Model & Serial Plate Location PARTS & SERVICE You will find the Model plate on the front of the Mini Pod Press. You will need this information for ordering spare or replacement parts. PARTS & SERVICE 29

30 PARTS & SERVICE Recommended Spare Parts The following are recommended spare parts for your machine. You may want to stock the noted quantity of these items to prevent any down time due to shipping: QTY PART NAME DESCRIPTION 1 CYL.BE.20 Type 30 Service Chamber 1 SPGC Spring x 8 x Plate-Guide-Poly PARTS & SERVICE 30

31 PARTS & SERVICE Model Sheet Config Shown: M M2 ITEM NO. PartNo Description QTY Channel-Frame Stiff Sheet-Leg Sheet-Leg Sheet-Foot Plate-Spring Plate-Guide-Poly Weldment - Cylinder Frame 10 SPGC Spring X 8 X A1 Upper Platen Welded Platen-Lower Welded Jack-Pod Press 1 14 CYL.BE.40 Type 20 Service Chamber Plate-Poly 2 6 #78H- Model Sheet - Pod Press MATERIAL NAME: Description: Created: 1/10/2012 by: Jacob D. Greenfield Modified: 3/7/2012 by: Administrator DWG. NO M2 SCALE: 1:24 James L. Taylor Mfg. Co. Poughkeepsie, NY, USA WEIGHT: REV SHEET 1 OF 1 PARTS & SERVICE 31

32 PARTS & SERVICE Parts Order Form 1. Sold to: Company Address Address City State Zip Your Name Phone # Fax # Purchase Order # 3. Parts Needed: 2. Ship to: Company Address Address City State Zip Attention: Phone # Fax # Purchase Order # Quantity Part Name (see parts list) Description Price (each) 4. Preferred Shipping Method: (check one) UPS Regular Truck Customer Pickup UPS Next Day Air Carrier: Other: Air Freight 5. Fax, Mail, or Phone your Order to: JLT Clamps 108 Parker Avenue Poughkeepsie, NY Phone: (800) Fax: (336) PARTS & SERVICE 32

310 SERIES TILT-TO-LOAD ROTATOR. The Specialist In Drum Handling Equipment

310 SERIES TILT-TO-LOAD ROTATOR. The Specialist In Drum Handling Equipment OPERATOR S MANUAL FOR MORSE TILT-TO-LOAD DRUM ROTATOR SAFETY INFORMATION: While Morse Manufacturing Co. drum handling equipment is engineered for safety and efficiency, a high degree of responsibility

More information

UE- 90- X X X X X X O P E R AT I N G M A N UA L 0 TO 90 HYDRAULIC UPENDER

UE- 90- X X X X X X O P E R AT I N G M A N UA L 0 TO 90 HYDRAULIC UPENDER UE- 90- X X X X X X O P E R AT I N G M A N UA L ADDRESS 2230 Brush College Road Decatur, IL 62526 Phone: 217-423-6001 Fax: 217-422-1049 E-mail: sales@alignprod.com www.alignproductionsystems.com UE-90-XXXXXX

More information

Pressure Relief Valve Instruction Manual

Pressure Relief Valve Instruction Manual CVR3-M0_062017 Pressure Relief Valve Instruction Manual MODEL: CVR3 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website:

More information

RASP RX3 Feed UnitTM SPONGE-JET USER MANUAL. Sponge-Jet, Inc. (USA) 14 Patterson Lane Newington, NH

RASP RX3 Feed UnitTM SPONGE-JET USER MANUAL. Sponge-Jet, Inc. (USA) 14 Patterson Lane Newington, NH SPONGE-JET RASP RX3 Feed UnitTM USER MANUAL Sponge-Jet, Inc. (USA) 14 Patterson Lane +1-603-610-7950 Newington, NH 03801 www.spongejet.com Sponge-Jet RASP RX3 User Manual - REV A / DOC: MKT-014-ENG SPONGE-JET

More information

Model Visit our website at:

Model Visit our website at: 6 DIAL Fractional CALIPER Model 92437 Set up And Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious

More information

Misaligned Folds Paper Feed Problems Double Feeds Won t Feed FLYER Won t Run iii

Misaligned Folds Paper Feed Problems Double Feeds Won t Feed FLYER Won t Run iii Operator s Manual Table of Contents Operator Safety... 1 Introduction... 2 Unpacking and Setup... 3 Unpacking... 3 Setup... 4 FLYER Overview... 5 FLYER Diagram... 5 Capabilities... 5 Control Panel... 6

More information

INSTALLATION, OPERATION AND SERVICE MANUAL ABS AIR BAG LIFT

INSTALLATION, OPERATION AND SERVICE MANUAL ABS AIR BAG LIFT INSTALLATION, OPERATION AND SERVICE MANUAL ABS AIR BAG LIFT P.O. Box 1058 1058 West Industrial Avenue Guthrie, OK 73044-1058 405-282-5200 FAX: 405-282-8105 www.autoquip.com Item # 830ABS Version 1.0 07/2001

More information

60 farm jack. Distributed exclusively by Harbor Freight Tools Mission Oaks Blvd., Camarillo, CA 93011

60 farm jack. Distributed exclusively by Harbor Freight Tools Mission Oaks Blvd., Camarillo, CA 93011 60 farm jack 66183 Set up And Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read

More information

OPERATOR S MANUAL AND PARTS LISTING FOR THE. STM Mounted Harrow

OPERATOR S MANUAL AND PARTS LISTING FOR THE. STM Mounted Harrow MANUFACTURERS OF QUALITY AGRICULTURAL EQUIPMENT SINCE 1936 OPERATOR S MANUAL AND PARTS LISTING FOR THE STM Mounted Harrow With FH 5-Bar Section VERSION: 10-07AJF TO THE OWNER AND OPERATORS Before assembling

More information

170-CG Feed Unit SPONGE-JET USER MANUAL. Sponge-Jet, Inc. (USA) 14 Patterson Lane Newington, NH

170-CG Feed Unit SPONGE-JET USER MANUAL. Sponge-Jet, Inc. (USA) 14 Patterson Lane Newington, NH SPONGE-JET 170-CG Feed Unit USER MANUAL Sponge-Jet, Inc. (USA) 14 Patterson Lane +1-603-610-7950 Newington, NH 03801 www.spongejet.com AUGUST 2014, Sponge-Jet 170-CG User Manual - REV A / DOC: M-MKTG-002ENG

More information

Hot Tapping Machine. OPERATIONS MANUAL and OPERATING INSTRUCTIONS

Hot Tapping Machine. OPERATIONS MANUAL and OPERATING INSTRUCTIONS 262-2040 Hot Tapping Machine For performing 1/4 6 Hot taps 285 psi or less. Municipal Water, Sewage, & Building Services Use OPERATIONS MANUAL and OPERATING INSTRUCTIONS WARNING: These instructions are

More information

Effective March 2015 Supersedes S August 2002

Effective March 2015 Supersedes S August 2002 Reclosers MN280009EN Effective March 2015 Supersedes S280-40-11 August 2002 COOPER POWER SERIES Type R, RE, W, WE reclosers closing solenoid contactor replacement kit KA852R installation instructions DISCLAIMER

More information

/ FLT-M Quick Clean Rotary Airlock Valve Operators Manual. Kice Industries, Inc. RAV-M RAV-M

/ FLT-M Quick Clean Rotary Airlock Valve Operators Manual. Kice Industries, Inc. RAV-M RAV-M 1 Quick Clean Rotary Airlock Valve Operators Manual Kice Industries, Inc. RAV-M04-0000 RAV-M04-0000 2 INTRODUCTION When you purchased your new Kice equipment, you bought a dependable and quality-built

More information

Parts & Operators Manual

Parts & Operators Manual Parts & Operators Manual (888) 317-5878 www.talet.ca To The Owner General Comments Congratulations on the purchase of your new Talet Mat Grapple. Your unit was carefully designed and manufactured to give

More information

INSTRUCTION MANUAL. Includes: OPERATION SETUP USE & CARE SERVICE. SPORTS ATTACK LLC

INSTRUCTION MANUAL. Includes: OPERATION SETUP USE & CARE SERVICE. SPORTS ATTACK LLC Electronic Baseball Pitching Machine baseball INSTRUCTION MANUAL PART NO. B-EHABA-100 REV022111 INSTRUCTION MANUAL Includes: OPERATION SETUP USE & CARE SERVICE SPORTS ATTACK LLC 800-717-4251 www.sportsattack.com

More information

Index Table. Model 794. Installation, Operating and Maintenance Instructions

Index Table. Model 794. Installation, Operating and Maintenance Instructions CLOCKWISE MANUAL MAKING INTO CCW TABLE Index Table Model 794 Installation, Operating and Maintenance Instructions Black & Webster Products Division 545 Hupp Ave. P.O. Box 831, Jackson, Michigan 49204 2009

More information

VL PONTOON/TRITOON DECK BRACKET 13 INSTRUCTIONS

VL PONTOON/TRITOON DECK BRACKET 13 INSTRUCTIONS VL PONTOON/TRITOON DECK BRACKET 13 INSTRUCTIONS REIMANN & GEORGER CORPORATION MARINE PRODUCTS BUFFALO, NY P/N 6112--- 01/08/14 TABLE OF CONTENTS CHAPTER TITLE PAGE 1 SAFETY... 1 1.1 Introduction... 1 1.2

More information

OPERATOR S MANUAL AND PARTS LISTING FOR THE. CTM Series Mounted Harrow

OPERATOR S MANUAL AND PARTS LISTING FOR THE. CTM Series Mounted Harrow MANUFACTURERS OF QUALITY AGRICULTURAL EQUIPMENT SINCE 1936 OPERATOR S MANUAL AND PARTS LISTING FOR THE CTM Series Mounted Harrow VERSION: 7-12 (MM-2300) TO THE OWNER AND OPERATORS Before assembling or

More information

1000-Lb. Rapid Lift Hydraulic Table

1000-Lb. Rapid Lift Hydraulic Table 1000-Lb. Rapid Lift Hydraulic Table Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety

More information

COOPER POWER SERIES. D-73P3 bypass switches installation instructions. Switches MN008005EN. Effective April 2016 Supersedes S June 2013

COOPER POWER SERIES. D-73P3 bypass switches installation instructions. Switches MN008005EN. Effective April 2016 Supersedes S June 2013 Switches MN008005EN Effective April 2016 Supersedes S328-120-1 June 2013 D-73P3 bypass switches installation instructions COOPER POWER SERIES DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY The information,

More information

Cylinder Tilt Saddle Instruction Manual

Cylinder Tilt Saddle Instruction Manual Cylinder Tilt Saddle Instruction Manual MODELS: SDT05, SDT10, SDT15, SDT25 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 - Fax: 816-448-2142 E-mail: sales@bvahydraulics.com

More information

APCO ASU-SCAV & ASU-CAV SINGLE BODY COMBINATION AIR VALVES

APCO ASU-SCAV & ASU-CAV SINGLE BODY COMBINATION AIR VALVES APCO ASU-SCAV & ASU-CAV SINGLE BODY COMBINATION AIR VALVES Instruction D12039 December 2015 Instructions These instructions provide installation, operation and maintenance information for the. They are

More information

HYDRAULIC WINCH FOR AUGERS UP TO WR10 X 71 / W130 X 41 ASSEMBLY & OPERATION MANUAL

HYDRAULIC WINCH FOR AUGERS UP TO WR10 X 71 / W130 X 41 ASSEMBLY & OPERATION MANUAL HYDRAULIC WINCH ASSEMBLY & OPERATION MANUAL Read this manual before using product. Failure to follow instructions and safety precautions can result in serious injury, death, or property damage. Keep manual

More information

Henry Pratt Diviner Position Indicator. Operation and Maintenance Manual. Job Name: Contractor: Date: Document #:DIVPOSNOM Revision Date: 2/9/11

Henry Pratt Diviner Position Indicator. Operation and Maintenance Manual. Job Name: Contractor: Date: Document #:DIVPOSNOM Revision Date: 2/9/11 Henry Pratt Diviner Position Indicator Operation and Maintenance Manual Job Name: Contractor: Date: Document #:DIVPOSNOM Revision Date: 2/9/11 SAFETY MESSAGES All safety messages in the instructions are

More information

PL475. Patient Lift Scale. Owner's Manual

PL475. Patient Lift Scale. Owner's Manual PL475 Patient Lift Scale Owner's Manual CARDINAL SCALE MFG. CO. 0046-M496-O1 Rev A PO BOX 151 WEBB CITY, MO 64870 Printed in USA 11/99 PH 417-673-4631 FAX 417-673-5001 2 Thank you for purchasing our DETECTO

More information

Portable Compressed CO 2 Regulator

Portable Compressed CO 2 Regulator Portable Compressed CO 2 Regulator 99901 Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com

More information

COMPACT METAL bender 99826

COMPACT METAL bender 99826 COMPACT METAL bender 99826 Set up And Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com

More information

! Warning, refer to accompanying documents.

! Warning, refer to accompanying documents. About this Manual To the best of our knowledge and at the time written, the information contained in this document is technically correct and the procedures accurate and adequate to operate this instrument

More information

General Information. NTA607HD Lift Assist Adjustments. Tools Required. Work Location. Notations and Conventions U B F D R B F L

General Information. NTA607HD Lift Assist Adjustments. Tools Required. Work Location. Notations and Conventions U B F D R B F L Great Plains Manufacturing, Inc. 1 NTA607HD Lift Assist Adjustments Null4: When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives

More information

AIR INLINE METAL SHEAR

AIR INLINE METAL SHEAR AIR INLINE METAL SHEAR ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd. / Camarillo, CA 93011 Copyright 1997 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork

More information

OPERATOR'S & PARTS MANUAL

OPERATOR'S & PARTS MANUAL MULTI-TASK ATTACHMENT OPERATOR'S & PARTS MANUAL OM638 8963 11-5-04-3 REV. 3 75538 IMPORTANT: Read this manual carefully. It contains information about your safety and the safety of others. Also become

More information

GAS FRYER Instruction Manual Model #5099NS

GAS FRYER Instruction Manual Model #5099NS Part No. 89932 Revised: March 2004 GAS FRYER Instruction Manual Model #5099NS Cincinnati, OH 45241-4807 USA GAS SAFETY PRECAUTIONS GAS FUNNEL CAKE FRYER 2 MODEL #5099NS GAS FUNNEL CAKE FRYER SAFETY PRECAUTIONS

More information

Tube-Line Accelerator Spinner Kit

Tube-Line Accelerator Spinner Kit Tube-Line Accelerator Spinner Kit Operator's Manual PP-00799 (19/09/11) 2 TO THE OWNER This manual contains information concerning the adjustment, assembly and maintenance of your Tube-Line Spinner Kit.

More information

NB/NBR NITROGEN BOOSTER FOR AVIATION SERVICE

NB/NBR NITROGEN BOOSTER FOR AVIATION SERVICE NB/NBR NITROGEN BOOSTER FOR AVIATION SERVICE INSTALLATION, OPERATION & MAINTENANCE MANUAL INTERFACE DEVICES, INC. 230 Depot Road, Milford, CT 06460 Ph: (203) 878-4648, Fx: (203) 882-0885, E-mail: info@interfacedevices.com

More information

Revolution Gurney Attachment

Revolution Gurney Attachment Revolution Gurney Attachment PART NUMBER: F-30RSA-S2 (2nd SERIES) WEIGHT CAPACITY: 350 POUNDS - STANDARD REVOLUTION 300 POUNDS - DEEP DRAFT REVOLUTION MANDATORY LEAVE THIS MANUAL WITH LIFT OWNER Read &

More information

300 Lbs. Motorcycle Scissor Lift

300 Lbs. Motorcycle Scissor Lift 300 Lbs. Motorcycle Scissor Lift 65318 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com

More information

CF-SERIES HIGH FLOW REGULATORS

CF-SERIES HIGH FLOW REGULATORS CF-SERIES HIGH FLOW REGULATORS Owner s Manual Printed in U.S.A February 2014 Publication No. OM-CA-3 REV.4 1.3 Copyright Notice 1.0 Introduction The CF-Series are high flow regulators for critical applications

More information

Installation, Operation and Maintenance Manual

Installation, Operation and Maintenance Manual Installation, Operation and Maintenance Manual VREL Variable Pressure Reducing Element SPD 5.6.4 Rev. 11 October 2007 SENTRY EQUIPMENT CORP PO Box 127 Oconomowoc, WI 53066 USA Phone: 262.567.7256 Fax:

More information

Sweeper Dual Control. Automatic Sweeper Switching System SW SERIES SWEEPERS SW-4815 SW-4820 SW-4825 MAGUIRE PRODUCTS INC.

Sweeper Dual Control. Automatic Sweeper Switching System SW SERIES SWEEPERS SW-4815 SW-4820 SW-4825 MAGUIRE PRODUCTS INC. MAGUIRE PRODUCTS INC. SW SERIES SWEEPERS For SW Series Sweeper Models: SW-4815 SW-4820 SW-4825 Sweeper Dual Control Automatic Sweeper Switching System INSTRUCTION AND OPERATION MANUAL Copyright Maguire

More information

UNIVERSAL GAS FRYER Instruction Manual Model #8065NS

UNIVERSAL GAS FRYER Instruction Manual Model #8065NS Part No. 88847 Revised: August 2004 UNIVERSAL GAS FRYER Instruction Manual Model #8065NS Cincinnati, OH 45241-4807 USA GAS SAFETY PRECAUTIONS OPERATING INSTRUCTIONS UNPACKING AND ASSEMBLY After unpacking

More information

Installation and Service Manual

Installation and Service Manual An Actuant Company Installation and Service Manual Heavy Duty Hydraulic Stabilization Legs CONTENTS Part # 3010003129 REV 0D Section Page 1.0 Receiving Instructions 2 2.0 Safety Issues 2 3.0 Hydraulic

More information

COOPER POWER SERIES. UltraSIL Polymer-Housed Distribution-Class MOV Surge Arrester Installation Instructions. Surge Arresters MN235006EN

COOPER POWER SERIES. UltraSIL Polymer-Housed Distribution-Class MOV Surge Arrester Installation Instructions. Surge Arresters MN235006EN Surge Arresters MN235006EN Effective August 2016 Supersedes June 2014 (S235-35-1) COOPER POWER SERIES UltraSIL Polymer-Housed Distribution-Class MOV Surge Arrester Installation Instructions DISCLAIMER

More information

Owner s Manual Air Bag Lift Tables

Owner s Manual Air Bag Lift Tables Owner s Manual Air Bag Lift Tables Airbag Lift Manual for PPA, GTA, GLSA & GLTA Models SOUTHWORTH PRODUCTS CORP PO Box 1380, Portland, ME 04104-1380 Telephone: 1-800-743-1000 or 207-878-0700 Fax: 207-797-4734

More information

Model ASSEMBLY and OPERATING INSTRUCTIONS

Model ASSEMBLY and OPERATING INSTRUCTIONS QUICK CHANGE AIR BRUSH KIT Model 93506 ASSEMBLY and OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,

More information

75 Ton SD Shop Press Operating Instructions

75 Ton SD Shop Press Operating Instructions 75 Ton SD Shop Press Operating Instructions MODEL NO. 856SD Hazard Symbols Used in the Manuals This manual includes the hazard symbols defined below when the operations or maintenance job involves a potential

More information

DEH Instructions. Three-Phase, Platform-Mounted Distribution Transformers

DEH Instructions. Three-Phase, Platform-Mounted Distribution Transformers g DEH 40050 Instructions Three-Phase, Platform-Mounted Distribution Transformers Introduction The equipment covered by these instructions should be operated and serviced only by competent technicians familiar

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT

1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT This symbol means: ATTENTION - BECOME ALERT YOUR SAFETY IS INVOLVED. When you see this symbol

More information

U S E R M A N U A L CAUTION. SAVE THESE INSTRUCTIONS Federal (USA) law restricts this device to sale by or on the order of a physician.

U S E R M A N U A L CAUTION. SAVE THESE INSTRUCTIONS Federal (USA) law restricts this device to sale by or on the order of a physician. U S E R M A N U A L 1600 SERIES OXYGEN REGULATOR 168715G (Shown) SAVE THESE INSTRUCTIONS Federal (USA) law restricts this device to sale by or on the order of a physician. 300 Held Drive Tel: (+001) 610-262-6090

More information

AUTOMATED INDUSTRIAL MACHINE, INC

AUTOMATED INDUSTRIAL MACHINE, INC The Pneumatic Toggle Press Innovators. Since 1947. AUTOMATED INDUSTRIAL MACHINE, INC TOGGLE-AIRE DIVISION 347 Farnum Pike Smithfield, RI, USA 02917 401-232-1710 www.joraco.com Installation, Operation and

More information

Model C Pipe Line Strainer 6, 8 & 10 Inch (DN150, DN200 & DN250) 250 psi (17,2) General Description. Technical Data. Page of 6 MAY, 2006 TFP1644

Model C Pipe Line Strainer 6, 8 & 10 Inch (DN150, DN200 & DN250) 250 psi (17,2) General Description. Technical Data. Page of 6 MAY, 2006 TFP1644 Technical Services: Tel: (00) 31-9312 / Fax: (00) 791-5500 Model C Pipe Line Strainer 6, & 10 Inch (150, & 250) 250 psi (17,2) General Description The welded steel body Model C Pipe Line Strainers (Ref.

More information

ULTRA HIGH PRESSURE PAINT GRATE CLEANER FCT-JS OPERATION AND MAINTENANCE MANUAL

ULTRA HIGH PRESSURE PAINT GRATE CLEANER FCT-JS OPERATION AND MAINTENANCE MANUAL ULTRA HIGH PRESSURE PAINT GRATE CLEANER FCT-JS OPERATION AND MAINTENANCE MANUAL 466 S. Skylane Drive DURANGO, COLORADO 81303 970-259-2869 PHONE 970-259-2868 FAX www.stoneagetools.com sales@stoneagetools

More information

AIR/OVER HYDRAULIC JACK 20 TON

AIR/OVER HYDRAULIC JACK 20 TON AIR/OVER HYDRAULIC JACK 0 TON 4487 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 999 by Harbor Freight Tools.

More information

Martin V-Plow HD. Go to Martin V-Plow HD web page. Operator s Manual M3201

Martin V-Plow HD. Go to Martin V-Plow HD web page. Operator s Manual M3201 Martin V-Plow HD Go to Martin V-Plow HD web page Operator s Manual M3201 Important MARTIN ENGINEERING HEREBY DISCLAIMS ANY LIABILITY FOR: DAMAGE DUE TO CONTAMINATION OF THE MATERIAL; USER S FAILURE TO

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

4-in-1 Professional Inflator Kit

4-in-1 Professional Inflator Kit 4-in-1 Professional Inflator Kit Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety

More information

AWG Fittings LLC. Pressure Relief Valve Up to 250 PSI. Product Number Read this instruction manual before use.

AWG Fittings LLC. Pressure Relief Valve Up to 250 PSI. Product Number Read this instruction manual before use. AWG Fittings LLC Pressure Relief Valve Up to 250 PSI Product Number 30004033 Read this instruction manual before use. Using this device without t understanding di this products operation and care may lead

More information

COOPER POWER SERIES. QD8 Quik-Drive tap-changer VR or VL reversing switch stationary contact assembly kit number A48 installation instructions

COOPER POWER SERIES. QD8 Quik-Drive tap-changer VR or VL reversing switch stationary contact assembly kit number A48 installation instructions Voltage Regulators MN225037EN Effective June 2016 New Issue COOPER POWER SERIES QD8 Quik-Drive tap-changer VR or VL reversing switch stationary contact assembly kit number 5791646A48 installation instructions

More information

RAM 4021 Operation Manual

RAM 4021 Operation Manual RAM 4021 Operation Manual Worldwide Manufacturer of Gas Detection Solutions TABLE OF CONTENTS RAM 4021 For your safety...3 Description...3 Set-up mode...4 Annunciator lights/alarms...4 Operation...5 Calibration...6

More information

1 DRIVE INDUSTRIAL IMPACT WRENCH

1 DRIVE INDUSTRIAL IMPACT WRENCH 1 DRIVE INDUSTRIAL IMPACT WRENCH 92622 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight

More information

OPERATION and MAINTENANCE Guide

OPERATION and MAINTENANCE Guide Catalog No. AIR1000 Winch and Hoist OPERATION and MAINTENANCE Guide Cat. No. AIR1000 1250 Lb. Single Line Pull READ THIS BEFORE OPERATING UNIT INSTALLATION: Mount on clean, flat surface. Use 1/2" mounting

More information

Needle valve. Contents. User s Manual. (1) Be sure to read the following warranty clauses of our product 1. (2) General operating instructions 2

Needle valve. Contents. User s Manual. (1) Be sure to read the following warranty clauses of our product 1. (2) General operating instructions 2 Serial No. H-V024-E-7 Needle valve User s Manual Contents (1) Be sure to read the following warranty clauses of our product 1 (2) General operating instructions 2 (3) General instructions for transportation,

More information

RARS5000 AIR BODY SAW OWNER S OPERATING MANUAL

RARS5000 AIR BODY SAW OWNER S OPERATING MANUAL RARS5000 AIR BODY SAW OWNER S OPERATING MANUAL DESCRIPTION 1. No mar 2. No mar tip 3. Housing grip 4. Trigger 5. Air inlet 6. Air inlet plug 7. Plastic board Important! It is essential that you read the

More information

AC1810 / AC1810-A TECHNICAL SPECIFICATIONS. Operating Pressure psi ( kgs/cm²) [AC1810] Displacement. Net Weight

AC1810 / AC1810-A TECHNICAL SPECIFICATIONS. Operating Pressure psi ( kgs/cm²) [AC1810] Displacement. Net Weight Technical Specifications Operating Instructions Maintenance Information Troubleshooting Guide Parts Diagrams AC1810 / AC1810-A THE EVOLUTION OF PERFECTION CAUTION: Before attempting to use or service this

More information

DEEPSEA. Power & Light. Micro SeaLaser. Operator s Manual Ruffin Road San Diego, CA USA T: (858) F: (858)

DEEPSEA. Power & Light. Micro SeaLaser. Operator s Manual Ruffin Road San Diego, CA USA T: (858) F: (858) Micro SeaLaser DEEPSEA Power & Light T: (858) 576-1261 F: (858) 576-0219 4033 Ruffin Road San Diego, CA 92123-1817 USA www.deepsea.com sales@deepsea.com Rev. 08/28/18 Micro SeaLaser Specification Overview

More information

170-SJ Feed UnitTM 470-SJ Feed UnitTM

170-SJ Feed UnitTM 470-SJ Feed UnitTM SPONGE-JET 170-SJ Feed UnitTM 470-SJ Feed UnitTM USER MANUAL Sponge-Jet, Inc. (USA) 14 Patterson Lane +1-603-610-7950 Newington, NH 03801 www.spongejet.com Sponge-Jet 170-SJ / 470-SJ User Manual - REV

More information

COOPER POWER SERIES. 200 A 15, 25, and 35 KV class insulated standoff bushing installation instructions. Loadbreak Apparatus Connectors MN650039EN

COOPER POWER SERIES. 200 A 15, 25, and 35 KV class insulated standoff bushing installation instructions. Loadbreak Apparatus Connectors MN650039EN Loadbreak Apparatus Connectors MN650039EN Effective November 2016 Supersedes October 2013 (S500-22-1) COOPER POWER 200 A 15, 25, and 35 KV class insulated standoff bushing installation instructions SERIES

More information

Installation, Operation and Maintenance Manual. TSV Temperature Shut-off Valve SPD Rev. 6 10/07

Installation, Operation and Maintenance Manual. TSV Temperature Shut-off Valve SPD Rev. 6 10/07 Installation, Operation and Maintenance Manual TSV Temperature Shut-off Valve SPD 13.1.2 Rev. 6 10/07 SENTRY EQUIPMENT CORP PO Box 127 Oconomowoc, WI 53066 USA Phone: 262.567.7256 Fax: 262.567.4523 Email:

More information

SASK-A-POLE OWNERS AND USERS MANUAL

SASK-A-POLE OWNERS AND USERS MANUAL SASK-A-POLE OWNERS AND USERS MANUAL GENERAL INFORMATION The Saskatchewan Abilities Council s Sask-a-Pole accessibility and transfer aid is designed to help provide safe and easy access to chairs, beds,

More information

MODEL 840 AIR HYDRAULIC PUMP INSTRUCTION

MODEL 840 AIR HYDRAULIC PUMP INSTRUCTION MODEL 840 AIR HYDRAULIC PUMP INSTRUCTION Jackco Transnational Inc. 202 South El Monte, CA 888-452-2526 www.jackco.com FOR YOUR SAFETY Read all instructions, warnings and cautions carefully. Follow all

More information

WATER HEATER THERMAL EXPANSION TANKS Owner s Manual. Safety Instructions Installation Maintenance Warranty. Models: 2-5 Gallon Capacity

WATER HEATER THERMAL EXPANSION TANKS Owner s Manual. Safety Instructions Installation Maintenance Warranty. Models: 2-5 Gallon Capacity WATER HEATER THERMAL EXPANSION TANKS Owner s Manual Safety Instructions Installation Maintenance Warranty Models: 2-5 Gallon Capacity Thank You for purchasing this Thermal Expansion Tank. Properly installed

More information

COOPER POWER SERIES. Manual or Hostick Operable, Padlockable 150 A Tap-Changer Switch Installation Instructions. Tap-Changer Switch MN800015EN

COOPER POWER SERIES. Manual or Hostick Operable, Padlockable 150 A Tap-Changer Switch Installation Instructions. Tap-Changer Switch MN800015EN Tap-Changer Switch MN800015EN Effective December 2017 Supersedes February 1987 (S800-58) COOPER POWER SERIES Manual or Hostick Operable, Padlockable 150 A Tap-Changer Switch Installation Instructions DISCLAIMER

More information

TrekMill USER'S MANUAL MM5050

TrekMill USER'S MANUAL MM5050 Read the safety and comfort guide in this manual before using this equipment. USER'S MANUAL TrekMill MM5050 Serial Number: Date Purchased: Find the serial number in the location shown below. CONTENTS Safety

More information

TITAN FLOW CONTROL, INC.

TITAN FLOW CONTROL, INC. PREFACE: This manual contains information concerning the installation, operation, and maintenance of Titan Flow Control (Titan FCI) Simplex Basket Strainers. To ensure efficient and safe operation of Titan

More information

LOCKOUT VALVE INSTALLATION MANUAL IMPORTANT: PLEASE REVIEW THIS ENTIRE PUBLICATION BEFORE INSTALLING, OPERATING OR MAINTAINING THE LOCKOUT AIR VALVE.

LOCKOUT VALVE INSTALLATION MANUAL IMPORTANT: PLEASE REVIEW THIS ENTIRE PUBLICATION BEFORE INSTALLING, OPERATING OR MAINTAINING THE LOCKOUT AIR VALVE. LOCKOUT VALVE INSTALLATION MANUAL EEZ- Manual Valve Shut-Off Valve Manual Pilot Valve Slide-Operated Valve IMPORTANT: PLEASE REVIEW THIS ENTIRE PUBLICATION BEFORE INSTALLING, OPERATING OR MAINTAINING THE

More information

10 DRIP NOZZLE WATERING DRIP KIT Model / Model 46095

10 DRIP NOZZLE WATERING DRIP KIT Model / Model 46095 10 DRIP NOZZLE WATERING DRIP KIT Model 93261 / Model ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission

More information

20 Ton SD Shop Press Operating Instructions

20 Ton SD Shop Press Operating Instructions 20 Ton SD Shop Press Operating Instructions MODEL NO. 850SD Hazard Symbols Used in the Manuals This manual includes the hazard symbols defined below when the operations or maintenance job involves a potential

More information

deluxe toilet safety support

deluxe toilet safety support deluxe toilet safety support Model 97388 Cleaning, Assembly, And Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ

More information

REVERSIBLE AIR DRILL

REVERSIBLE AIR DRILL REVERSIBLE AIR DRILL MODEL NO: CAT87 PART NO: 3110835 OPERATING & MAINTENANCE INSTRUCTIONS GC0613 INTRODUCTION Thank you for purchasing this CLARKE Reversible Air Drill Before attempting to use this product,

More information

6 digital caliper with case

6 digital caliper with case 6 digital caliper with case Model 98563 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly

More information

1/2 AIR IMPACT WRENCH

1/2 AIR IMPACT WRENCH 1/2 AIR IMPACT WRENCH MODELS 82001 & 82002 82001 82002! This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to

More information

APCO ARV CLEAN WATER AIR RELEASE VALVES. Model 50A

APCO ARV CLEAN WATER AIR RELEASE VALVES. Model 50A APCO ARV CLEAN WATER AIR RELEASE VALVES Model 50A Instruction D12013 February 2017 Instructions These instructions provide installation, operation and maintenance information for APCO ARV Clean Water Air

More information

OPERATOR S MANUAL SPREADER. CSS, VNQ [For Combine Harvester AW82V] Original instructions

OPERATOR S MANUAL SPREADER. CSS, VNQ [For Combine Harvester AW82V] Original instructions OPERATOR S MANUAL SPREADER CSS, VNQ [For Combine Harvester AW82V] en Original instructions Introduction Introduction Please read this operator s manual before using your spreader. We would first like to

More information

Installation, Operation, & Maintenance Manual

Installation, Operation, & Maintenance Manual Installation, Operation, & Maintenance Manual CAMCORP Fabricated Airlocks Square & Round Sizes 8 to 30 Unique Design & Engineering Approaches for Industrial Applications Safety Recommendations... 1-1 Receiving

More information

Personal Fall Arrest System. User s. Manual. Part Number January 2014 (Replaces July 2013)

Personal Fall Arrest System. User s. Manual. Part Number January 2014 (Replaces July 2013) Personal Fall Arrest System User s Manual Part Number 0182150 January 2014 (Replaces July 2013) Personal Fall Arrest Anchorage PFAS Personal Fall Restraint Anchorage Additional Information For additional

More information

30T A/Manual Hydraulic Shop Press

30T A/Manual Hydraulic Shop Press 30T A/Manual Hydraulic Shop Press Operation Manual 1 1. Important Information 1.1 Safety Information 1.1.1 Hazard Symbols Used in the Manuals This manual includes the hazard symbols defined below when

More information

MODEL H RPM

MODEL H RPM MODEL H8217 3 8" REVERSIBLE ANGLE DRILL 0 1500 RPM INSTRUCTION MANUAL COPYRIGHT AUGUST, 2007 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT

More information

foldable/adjustable sawhorse

foldable/adjustable sawhorse foldable/adjustable sawhorse Model 96506 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly

More information

MODEL 100 NITROGEN INFLATION CART

MODEL 100 NITROGEN INFLATION CART MODEL 100 NITROGEN INFLATION CART Installation & Operation Information Branick Industries, Inc. 4245 Main Avenue P.O. Box 1937 Fargo, North Dakota 58103 REV120106 P/N: 81-0113 TABLE OF CONTENTS SAFETY

More information

COOPER POWER SERIES. Under-oil arrester disconnector installation/operation instructions. OEM Equipment MN800010EN

COOPER POWER SERIES. Under-oil arrester disconnector installation/operation instructions. OEM Equipment MN800010EN OEM Equipment MN800010EN Effective February 2016 Supersedes S800-51-1 August 2012 COOPER POWER SERIES Under-oil arrester disconnector installation/operation instructions DISCLAIMER OF WARRANTIES AND LIMITATION

More information

accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS

accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS 18 GAUGE 2 INCH BRAD NAILER Model: 7555 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry.

More information

8 TON AIR/MANUAL FLAT BOTTOM JACK

8 TON AIR/MANUAL FLAT BOTTOM JACK 8 TON AIR/MANUAL FLAT BOTTOM JACK Model 95967 OPERATION INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,

More information

MODEL H8214 AIR BODY SAW INSTRUCTION MANUAL

MODEL H8214 AIR BODY SAW INSTRUCTION MANUAL MODEL H8214 AIR BODY SAW INSTRUCTION MANUAL COPYRIGHT SEPTEMBER, 2007 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL

More information

Model B-1 Pipe Line Strainer 3, 4, 6 & 8 Inch (DN80, DN100, DN150 & DN200) 175 psi (12,1 bar) General Description. Technical Data

Model B-1 Pipe Line Strainer 3, 4, 6 & 8 Inch (DN80, DN100, DN150 & DN200) 175 psi (12,1 bar) General Description. Technical Data Technical Services: Tel: (800) 381-312 / Fax: (800) 71-5500 Customer Service/Sales: Tel: (215) 362-0700 / (800) 523-6512 Fax: (215) 362-5385 Model B-1 Pipe Line Strainer 3,, 6 & 8 Inch (DN80, DN100, DN150

More information

COOPER POWER SERIES. EL Bay-O-Net Current-Limiting Fuse Installation Instructions. Fusing Equipment MN132023EN

COOPER POWER SERIES. EL Bay-O-Net Current-Limiting Fuse Installation Instructions. Fusing Equipment MN132023EN Fusing Equipment MN132023EN Effective November 2016 Supersedes June 2010 (S240-70-1) EL Bay-O-Net Current-Limiting Fuse Installation Instructions COOPER POWER SERIES DISCLAIMER OF WARRANTIES AND LIMITATION

More information

Nose Equipment Manual Original Instruction

Nose Equipment Manual Original Instruction Nose Equipment Manual Original Instruction ProSet XT1 Blind Rivet Tool 76001 ProSet XT2 Blind Rivet Tool 76002 Hydro-Pneumatic Power Tool 2017 Stanley Black & Decker, Inc. All rights reserved. The information

More information

accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS

accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS 18 GAUGE 1-1/4 INCH BRAD NAILER Model: 7611 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry.

More information

To address this issue, Ariens Company has developed two cradle plates kits:

To address this issue, Ariens Company has developed two cradle plates kits: Date: August 21, 2012 No. B-2093 Service Bulletin Ariens Company 655 W. Ryan St. Brillion, WI 54110 www.gravely.com Product Family: Pro-Turn 400 Mowers Subject: Possible Foot Plate Weld Fracture Dealer

More information

OWNER S MANUAL. This manual contains; IMPORTANT SAFETY INFORMATION INSTALLATION INSTRUCTIONS MAINTENANCE FACTORY SERVICE REPAIR PARTS WARRANTY

OWNER S MANUAL. This manual contains; IMPORTANT SAFETY INFORMATION INSTALLATION INSTRUCTIONS MAINTENANCE FACTORY SERVICE REPAIR PARTS WARRANTY OWNER S MANUAL This manual contains; IMPORTANT SAFETY INFORMATION INSTALLATION INSTRUCTIONS MAINTENANCE FACTORY SERVICE REPAIR PARTS WARRANTY Models covered; PA506 EL506 Ergonomic Tool Arms, LLC PO Box

More information

J Air and Water Kit Instructions Part# 02584

J Air and Water Kit Instructions Part# 02584 J Air and Water Kit Instructions Part# 02584 Unpacking Please open and inspect your package upon receipt. Your package was packed with great care and all the necessary packing materials to arrive to you

More information