Training Title IDENTIFY OPERATIONAL UPSETS, REVIEW & VALIDATE IN OIL & CHEMICAL PLANTS
|
|
|
- Arthur Jenkins
- 5 years ago
- Views:
Transcription
1 Training Title IDENTIFY OPERATIONAL UPSETS, REVIEW & VALIDATE IN OIL & CHEMICAL PLANTS Training Duration 5 days Training Venue and Dates Identify Operational Upsets, Review & Validate in Oil & Chemical Plants March, 2019 $4,000 Dubai, UAE Trainings will be conducted in any of the 5 star hotels. Training Fees 4,000 US$ per participant for Public Training includes Materials/Handouts, tea/coffee breaks, refreshments & Buffet Lunch. Training Certificate Prolific Consultants FZE Certificate of Course Completion will be issued to all attendees. TRAINING OVERVIEW COURSE OBJECTIVE: Upon completion of this course, participants will be able to: Enrich knowledge on troubleshooting through various practical exercises carry out during the course (Specify the limitations to plant problem solving) Apply the methods of risk analysis particularly in process plant troubleshooting Identify various accidents and upsets in the process plant and know the causes, actions taken & lessons learned Discuss the risks associated with process troubleshooting and the applicable safety procedures to be followed. Describe how Heat Exchange Equipment function Recognize typical problems and identify possible causes of Heat Exchangers Describe how fired heaters function Recognize typical problems and identify possible causes fired heaters Know Fuel and Air Systems and their operating problems and upsets and how to rectify the problems. Identify the components of Flare System and its operating problems and upsets and how to rectify the problems. Identifying physical principles and forces that occur in rotating equipment, focusing on pumps and compressors Using operating and troubleshooting techniques for pumps and compressors Identify the Impurities in Water.
2 Know the Different Methods for Water Treatment. How to Control Cooling Water Quality. How to Control Potable Water Quality. How to Control Boiler Water Quality. How to Control Waste Water Quality. Understand and Identify the Operating Problems. Know the Different Types of Storage Tanks. Know how to Operate Storage Tanks. Identify the Hazardous Conditions and Safety Procedures for Storage Tanks. Define abnormal conditions such as high liquid level, heat loss, tanks getting dry, plugged outlets Handle abnormal conditions such as loss of power, loss of control, loss of air, shortage of man power SUITABLE FOR: Process Engineers, Plant Forman, Section Heads, Plant Supervisors, Operators and technical staff who involved in Operation and Maintenance of Oil, Gas, and Chemical plant operations. TRAINING METHODOLOGY: A highly interactive combination of lecture and discussion sessions will be managed to maximize the amount and quality of information, knowledge and experience transfer. The sessions will start by raising the most relevant questions, and motivate everybody finding the right answers. The attendants will also be encouraged to raise more of their own questions and to share developing the right answers using their own analysis and experience. All presentations are made in excellent colorful power point. Very useful Course Materials will be given. 30% Lectures 30% Workshops and work presentation 20% Group Work& Practical Exercises 20% Videos& General Discussions DAY WISE COURSE OUTLINE: 1. Oil and Chemical plant Equipment Trouble Shooting 1.1 Principles of Heat Transfer Introduction Heat Temperature and Heat Latent Heat Modes of Heat Transfer
3 1.1.6 Heat Transfer between Fluids Function of Heat Transfer Equipment 1.2 Heat Exchanges Equipment Operation and Trouble Shooting Shell and Tube Exchangers Double pipe Exchangers Indirect Heaters Air Cooled Exchangers 1.3 Fired Heaters Operation and Trouble Shooting Performance Monitoring Fired Heater Operation and Trouble Shooting 1.4 Gravity Separators Operation and Trouble Shooting Separation Process Principles of Separation Gravity Separation Phases of Separation Separation System Problems Factors Affecting Separation Separators Operation and Trouble Shooting 1.5 Atmospheric Fractionators Operation and Trouble Shooting Principles of Distillation (Fractionation) Reflux Reboiling Fractionators Operation and Trouble Shooting 1.6 Vacuum Fractionators Operation and Trouble Shooting Introduction Reduced Crude Flashing Vacuum Bottoms Handling Entrainment Control Product Condensation Vacuum Pressure Measurement Vacuum Fractionator Steam Jet Ejectors Introduction Operating Principle Vacuum Tower Control System Operation Startup
4 Troubleshooting 1.7 Desalter Desalter Operation Desalter Troubleshooting 1.8 Pumps Operation and Trouble Shooting Basic Pump Hydraulics Calculating Total Head Horsepower Calculations Net Positive Suction Head (NPSH) Pump Performance Curves System Performance Operation, Control and Trouble Shooting 1.9 Compressors Operation and Trouble Shooting The Theory of Compression Centrifugal Compressors Operation, Control and Trouble Shooting Reciprocating Compressors Operation, Control and Trouble Shooting Operation, Control and Trouble Shooting 2. Utilities Systems Operation and Trouble Shooting 2.1 Water Treatment Systems Introduction to Water Treatment Suspended Solids Dissolved Solids Dissolved Gases Industrial Water Treatment Primary Water Treatment Secondary Water Treatment Potable Water Purification Disinfections of Water Sterilization of Water by Chlorine, Ozone and Chloramines 2.2 Waste Water Systems Main Sources of Pollution At the Production During Transportation During Refining
5 2.2.2 De Oiling of Water Purpose of De Oiling API Interceptor Parallel Plate Interceptor (PPI) and Corrugated Plate Interceptor (CPI) Flotation Units Flocculation Units 2.3 Fuel Systems Typical Fuel Gas System Typical Problems Pressure Variation Liquid in the Gas Change in Fuel Gas Composition 2.4 Air Systems Instrument Air Typical Instrument Air Supply Systems Instrument Air Distribution Systems Operation and Trouble Shooting Utility Air Typical Utility Air Supply Systems Utility Air Distribution Systems Operation and Trouble Shooting 2.5 Storage Tanks Tank Design Tank Types Fixed-roof tanks Floating-roof tanks Operation of Floating-roof Tanks Taking floating-roof tanks into service During the first month of service During service Access to the floating roof Light gravity crudes and heavy roof Vapour pressure of the oil stored Spiking of oil with butane or propane Landing the roof Roof standing on its supports
6 2.5.4 Hazardous Conditions and Safety Procedures Explosive Air-Vapour Mixtures Ignition Sources Gases Discharged During Gas-Freeing Safety Procedures 4. Process Shutdown (PSD) and Emergency Shutdown (ESD) 4.1 Normal Shutdown Procedures 4.2 Process Emergency Shutdown Process Failures Utility failure 4.3 Emergency Shutdown Fire Power Failure Instrument Air Failure Cooling Water Failure Case Studies, Role Plays, Videos, Discussions, Last Day Review & Assessments will be carried out...
Training Fees 4,000 US$ per participant for Public Training includes Materials/Handouts, tea/coffee breaks, refreshments & Buffet Lunch.
Training Title GAS CONDITIONING & PROCESSING Training Duration 5 days Training Venue and Dates Gas Conditioning & Processing 5 07 11 April, 2019 $4,000 Dubai, UAE Trainings will be conducted in any of
MECHANICAL EQUIPMENTS: COMPRESSORS, PUMPS, SEALS, SPEED DRIVES, CONTROL VALVES & ACTUATORS & SAFETY RELIEF VALVES
Training Title MECHANICAL EQUIPMENTS: COMPRESSORS, PUMPS, SEALS, SPEED DRIVES, CONTROL VALVES & ACTUATORS & SAFETY RELIEF VALVES Training Duration 5 days Training Venue and Dates REF Mechanical Equipments:
Gas Compressor Operation and Control
Training Title Gas Compressor Operation and Control Training Duration 5 days Training Venue and Dates Gas Compressor Operation and Control 5 7 11 October, 2018 $4,000 Dubai, UAE Trainings will be conducted
Training Fees 4,000 US$ per participant for Public Training includes Materials/Handouts, tea/coffee breaks, refreshments & Buffet Lunch.
Training Title CONTROL & SAFETY RELIEF VALVES Training Duration 5 days Training Venue and Dates Control & Safety Relief Valves 5 06-10 May, 2018 $4,000 Dubai, UAE Trainings will be conducted in any of
VALVES OPERATION, MAINTENANCE & TROUBLESHOOTING
Training Title VALVES OPERATION, MAINTENANCE & TROUBLESHOOTING Training Duration 5 days Training Venue and Dates Valves operation, Maintenance & Troubleshooting 5 02-06 Dec $3,750 Dubai, UAE In any of
Gas Conditioning & Processing
An Intensive 5 Day Training Course Gas Conditioning & Processing 09-13 Sep 2018, Dubai 20-NOV-17 This course is Designed, Developed, and will be Delivered under iso Quality standards Gas Conditioning &
ADVANCED CONTROL VALVE AND ACTUATOR: Selection, Calculations, Sizing, Applications, Operation, Diagnostic Testing, Troubleshooting and Maintenance.
Training Title ADVANCED CONTROL VALVE AND ACTUATOR: Selection, Calculations, Sizing, Applications, Operation, Diagnostic Testing, Troubleshooting and Maintenance. Training Duration 5 days Training Dates
Training Fees 3,400 US$ per participant for Public Training includes Materials/Handouts, tea/coffee breaks, refreshments & Buffet Lunch.
Training Title DISTRIBUTED CONTROL SYSTEMS (DCS) 5 days Training Venue and Dates DISTRIBUTED CONTROL SYSTEMS (DCS) Trainings will be conducted in any of the 5 star hotels. 5 22-26 Oct. 2017 $3400 Dubai,
MU102: Mechanical Seals Applications for Rotating Machinery
MU102: Mechanical Seals Applications for Rotating Machinery MU102 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: All Rotating Equipment Machinery require controlling of the pumped fluids
PETROLEUM & GAS PROCESSING TECHNOLOGY (PTT 365) SEPARATION OF PRODUCED FLUID
PETROLEUM & GAS PROCESSING TECHNOLOGY (PTT 365) SEPARATION OF PRODUCED FLUID Miss Nur Izzati Bte Iberahim Introduction Well effluents flowing from producing wells come out in two phases: vapor and liquid
Overview. OPIPOH10 - SQA Unit Code HG Operate an Oil and Gas Process ( Gas Treatment)
OPIPOH10 - SQA Unit Code HG21 04 Overview This process involves the removal of impurities from the gas stream to reach the specified quality. The process boundary is from the inlet such as separator, compressor
PE096: Overview of Gas Processing Technology
PE096: Overview of Gas Processing Technology PE096 Rev.001 CMCT COURSE OUTLINE Page 1 of 6 Training Description: This course is designed for a broad audience and is participative and interactive, utilizing
Another convenient term is gauge pressure, which is a pressure measured above barometric pressure.
VACUUM Theory and Applications Vacuum may be defined as the complete emptiness of a given volume. It is impossible to obtain a perfect vacuum, but it is possible to obtain a level of vacuum, defined as
Screw Gas Compressors & Dry Gas Seals Applications. Singapore, Mandarin Orchard Singapore. Training Course : Training Course For One Week In
Training Course : Screw Gas Compressors & Dry Gas Seals Applications Training Course For One Week In Singapore, Mandarin Orchard Singapore Which Be Held As Under Details : Tel. : 00965 22610021 99600277,
2018 Spring Refining and Equipment Standards Meeting
2018 Spring Refining and Equipment Standards Meeting April 16-19, 2018 Sheraton Seattle Hotel Seattle, Washington www.api.org/meetings Current as of March 25, 2018 Subject to change SOME Pre- & Post-Week
T e l N o : F a x N o : E m a i l : a i s h c m c - m e. c o m w w w. c m c - m e.
MU047: Practical Valve Technology: Selection, Installation, Upgrading, Inspection & Troubleshooting MU047 Rev.002 CMCT COURSE OUTLINE Page 1 of 7 Training Description: This five-day intensive course covers
Liquid Ring Compressor Catching Chemicals Conserving Cash
Liquid Ring Compressor Catching Chemicals Conserving Cash You favour inherently safer solutions avoiding hazards rather than controlling them. We have developed a new range of compressors. 1 NSB GAS PROCESSING
MU043D: Mechanical Seals
MU043D: Mechanical Seals Jun 26 28, 2018 / Dubai MU043 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: This is an intensive, highly practical and useful five-day course. The participant will
EDUCTOR. principle of operation
EDUCTOR principle of operation condensate and mixing eductor s are designed to mix two liquids intimately in various proportions in operations where the pressure liquid is the greater proportion of the
Design. Pompetravaini-NSB API SB Liquid Ring Compressor for Gas Processing. Working Principle
SB Pompetravaini-NSB API SB Liquid Ring Compressor for Gas Processing A family of API liquid ring compressors has been developed and has been in the market for nearly a decade, they are specifically made
ANNEX AMENDMENTS TO THE INTERNATIONAL CODE FOR FIRE SAFETY SYSTEMS (FSS CODE) CHAPTER 15 INERT GAS SYSTEMS
Annex 3, page 2 ANNEX AMENDMENTS TO THE INTERNATIONAL CODE FOR FIRE SAFETY SYSTEMS (FSS CODE) CHAPTER 15 INERT GAS SYSTEMS The text of existing chapter 15 is replaced by the following: "1 Application This
NEW PROGRAM! OIL AND GAS TECHNOLOGY PROGRAM
NEW PROGRAM! PROGRAM Mechanical Maintenance MODEL H-IRT-1 Industrial Refrigeration Trainer MODEL H-RIG-1C Rigging Systems Trainer MODEL H-IMTS-1 Industrial Maintenance Training System MODEL H-FP-223-14
F All types of inert gas systems are to comply with the following:
(1974) (Rev.1 1983) (Rev.2 1987) (Rev.3 May 1998) (Corr. Sept 2001) (Rev.4 May 2004) (Rev.5 Nov 2005) (Rev.6 May 2012) (Rev.7 May 2015) Inert Gas Systems.1 General Requirements.1.1 All types of inert gas
Transient Analyses In Relief Systems
Transient Analyses In Relief Systems Dirk Deboer, Brady Haneman and Quoc-Khanh Tran Kaiser Engineers Pty Ltd ABSTRACT Analyses of pressure relief systems are concerned with transient process disturbances
Start up XXX from normal shutdown Introduction
Start up XXX from normal shutdown Introduction This procedure describes how to start a XXX after it has been shutdown normally, meaning there is a liquid and gas inventory in the unit. Task Criticality
2018 Fall Refining and Equipment Standards Meeting FINAL PROGRAM
2018 Fall Refining and Equipment Standards Meeting FINAL PROGRAM November 12-15, 2018 Hyatt Regency Orlando Orlando, Florida www.api.org/meetings Current as of November 11, 2018 Subject to change SOME
JOSOP 603 flaring and venting Standard
JOSOP 603 flaring and venting Standard Dec, 2010 Approved December 29, 2010 Version 01 Posted February 3, 2011 Table of Contents 1.0 Purpose, Objectives and Scope... 3 1.1 Purpose... 3 1.2 Objective...
List of Forms. Form Description Page No. Form Commercial Swimming Pool Discharge Application Form 31-4
City of Columbia Engineering Regulations PART 31: SPECIFICATIONS FOR COMMERCIAL SWIMMING POOL BACKWASH AND DRAINAGE Table of Contents Paragraph Description Page No. 31.1 General 31-1 31.2 Definitions 31-1
Successful Implementation of Dry Gas Seal in High Pressure Recycle gas Compressor at Hydrocracker & Effect of Gas composition on DGS Performance
Successful Implementation of Dry Gas Seal in High Pressure Recycle gas Compressor at Hydrocracker & Effect of Gas composition on DGS Performance Why - Dry Gas Seal??? M&I shutdown and Catalyst replacement
Process Safety Management Of Highly Hazardous Chemicals OSHA 29 CFR
Process Safety Management Of Highly Hazardous Chemicals OSHA 29 CFR 1910.119 PSM - Definition Not all refining hazards are caused by the same factors or involve ve the same degree of potential damage.
Overview. OPIPOH7 - SQA Unit Code HG1X 04. Operate an Oil and Gas Process (Gas Compression)
OPIPOH7 - SQA Unit Code HG1X 04 Overview This process involves the operation of the compression of gas to a higher pressure for the purpose of gas lift, export, fuel gas, reinjection or fractionation.
Vapor Recovery from Condensate Storage Tanks Using Gas Ejector Technology Palash K. Saha 1 and Mahbubur Rahman 2
37 Journal of Chemical Engineering, IEB Vapor Recovery from Condensate Storage Tanks Using Gas Ejector Technology Palash K. Saha 1 and Mahbubur Rahman 2 Abstract 1 Bibyana Gas Field 2 Department of Petroleum
PE094: Applied Heat Transfer Equipment and Thermal Design in the Process Industry
PE094: Applied Heat Transfer Equipment and Thermal Design in the Process Industry PE094 Rev.001 CMCT COURSE OUTLINE Page 1 of 6 Training Description: To provide practical and applied knowledge relating
HSE159 Safe Work Practices for Confined Space Entry
HSE159 Safe Work Practices for Confined Space Entry H.H. Sheik Sultan Tower (0) Floor Corniche Street Abu Dhabi U.A.E www.ictd.ae ictd@ictd.ae Course Introduction: The hazards of confined spaces are not
Liquid ring compressors
Liquid ring compressors KPH 95652 Compression pressures: 6 to 12 bar(g) Suction volume flow: 2960 to 3600 m³/h 78 to 174 psig 1742 to 2119 cfm DESIGN TYPE SIHI liquid ring compressors are displacement
Offshore Equipment. Yutaek Seo
Offshore Equipment Yutaek Seo Flash Gas Compressor (East spar) Dehydration NGL recovery Slug catcher Separator Stabilization Booster compressor Gas export compression (Donghae-1 Platform) May 7 th Gas
Minimum standard of competence in advanced training for liquefied gas tanker cargo operations (STCW Reg V/1-2)
Minimum standard of in advanced training for liquefied gas tanker cargo operations (STCW Reg V/1-2) Column 2 Knowledge, understanding and proficiency Design and characteristics of a liquefied gas tanker
Record of Assessment OFFICER IN CHARGE OF AN ENGINEERING WATCH
Record of Assessment for OFFICER IN CHARGE OF AN ENGINEERING WATCH Candidate s Name Candidate s Signature Candidate s Mariner Reference NOTE TO QUALIFIED ASSESSOR(S): In performing your function as a Qualified,
NORMAL OPERATING PROCEDURES Operating Parameter Information
Operating Parameter Information Each operator performing the normal operating procedures (routine checks) of the facility should be familiar with the current normal operating parameters of all systems
SAFETY MANUAL PURGING, VENTING & DRAINING PROCEDURE TABLE OF CONTENTS 1. INTRODUCTION SCOPE DEFINITIONS PROCEDURE...
Page 1 of 11 TABLE OF CONTENTS 1. INTRODUCTION... 2 2. SCOPE... 2 3. DEFINITIONS... 2 4.... 3 5. RESPONSIBILTIES... 10 6. REFERENCES... 10 7. ATTACHMENTS... 11 8. APPENDICES... 11 Rev. Issue Date Amendment
Capacity and pressure similar to R-507. Flooded systems. Low temperature (-46.7 C). R22 replacement as long as the condenser has the right size.
TECHNICAL DATA SHEET R-428A () Features and uses of R-428A () R-428A (RS-45) is a non flammable azeotropic blend, with zero ODP, compatible with traditional mineral lubricants, alkyl benzene and also with
The Original Simply The Best. Dredging Technology with Körting Ejectors
Dredging Technology with Körting Ejectors Ejectors on Assembly- and Drilling Platforms The English terms ejector, jet pump or eductor all describe the same ejector technology, as does the standard term
pumping gases JET PUMP TECHNICAL DATA
Section 1000 Bulletin 100 Issued 9/87 Replaces 7/84 JET PUMP TECHNICAL DATA pumping gases This technical bulletin includes general information about Penberthy Jet Pumps plus specific details for selecting
OIL AND GAS PROCESSES AND EMISSIONS
OIL AND GAS PROCESSES AND EMISSIONS This document provides a brief description of oil and gas activities, equipment and expected pollutants from those equipment types. The emissions processes are discussed
M-06 Nitrogen Generator (Nitrogen Making Machine)
Guideline No.M-06 (201510) M-06 Nitrogen Generator (Nitrogen Making Machine) Issued date: 20 th October, 2015 China Classification Society Foreword This Guideline is a part of CCS Rules, which contains
From the Choke KO drum, the gas passes through another gas/gas exchanger - the 'LTS Pre-cooler'.
Refer to Figures: 16 & 17 as you read on. Wet, natural gas direct from the wellstreams, at about 1600 Psi, is first pre-cooled and separated from liquids in an 'Intermediate Separator' and cooled in a
Digester Processes. 1. Raw Sludge Pumping System
Digester Processes 1. Raw Sludge Pumping System Removes accumulated sludge from the primary clarifiers, pumped through 1 of 2 pipes either 150 or 200mm in diameter (Fig. 1.1). Fig 1.1 Pipes feeding Digesters
Structured packing use in fluid catalytic cracker (FCC)
Reprinted from: March 1993 issue, p. 77-81. Used with permission. FCC main fractionator revamps Structured packing can influence unit pressure profiles and increase capacity Differential pressure S. W.
RMP/PSM WEBINAR SERIES
RMP/PSM WEBINAR SERIES Webinar Starts at 08:00 PT Please call (877) 532-0806 if you are having technical issues. The background music may be used to adjust your audio volume. IIAR STANDARDS AND HOW THEY
IE098: Advanced Process Control for Engineers and Technicians
IE098: Advanced Process Control for Engineers and Technicians IE098 Rev.001 CMCT COURSE OUTLINE Page 1 of 6 Training Description: Advanced Process Control and Loop Tuning and Analysis is designed to provide
PSM TRAINING COURSES. Courses can be conducted in multi-languages
Courses can be conducted in multi-languages One set of hardcopy course notes will be sent to client for printing and distribution to course participants. The courses will be held at the client s training
Design, Static Structural & Model Analysis of Water Ring Vacuum Pump Impeller
IJSRD - International Journal for Scientific Research & Development Vol. 6, Issue 03, 2018 ISSN (online): 2321-0613 Design, Static Structural & Model Analysis of Water Ring Vacuum Pump Impeller Ajay A.
GAS DEHYDRATION SYSTEM
GAS DEHYDRATION SYSTEM High pressure and compressed gases flow to the Glycol Contactor (MAF-3110). In the Contactor, gas flows through trays, contacting the lean glycol that is flowing across the trays
A large Layer of Protection Analysis for a Gas terminal scenarios/ cause consequence pairs
A large Layer of Protection Analysis for a Gas terminal 2000+ scenarios/ cause consequence pairs Richard Gowland European process Safety Centre The scope of the study was a large gas terminal handling
CHE 306 Stagewise Operations
CHE 306 Stagewise Operations Fall 2010 Introduction ti to Column Distillation Instructor: Dr. Housam Binous KFUPM, Dhahran 1 Over 90% of separations are done using distillation Over 40 000 distillation
ABIOSH INT L TECHNICAL CERTIFICATE IN OIL AND GAS SAFETY OPERATIONS (ONSHORE & OFFSHORE)
ABIOSH INT L TECHNICAL CERTIFICATE IN OIL AND GAS SAFETY OPERATIONS (ONSHORE & OFFSHORE) INTRODUCTION The oil and gas industry is a highly risk environment, therefore Safety and Health management is becoming
Caltec. The world leader in Surface Jet Pump (SJP) and compact separation systems for upstream oil and gas production enhancement
Caltec brings simple passive technology that enables oil and gas operators to harness the kinetic energy of the production process to enhance their production, extending economic field life and reducing
PENBERTHY SERIES LM, ELL, FL, GL, GH, U, L AND 2NC FOR PUMPING GASES
Practical, simple and cost-effective alternatives for process industries to purge gases from chambers, exhaust, evacuate or prime using liquid, steam or air operating media FEATURES Simple design with
Chapter 2 Preparations for Tank Cleaning Work
Chapter 2 Preparations for Tank Cleaning Work Preparatory Procedures for Tank Cleaning Work Make preparations for tank cleaning work according to the procedures given below. 1. Formulating the tank cleaning
"INOGATE Technical Secretariat & Integrated Programme in support of the Baku Initiative and the Eastern Partnership energy objectives" Project
"INOGATE Technical Secretariat & Integrated Programme in support of the Baku Initiative and the Eastern Partnership energy objectives" Project B U I L D I N G P A R T N E R S H I P S F O R E N E R G Y
Körting Liquid Jet Vacuum Ejectors
Körting iquid Jet Vacuum Ejectors Körting iquid Jet Vacuum Ejectors iquid jet vacuum ejectors convey and compress gases or vapours with the aid of a liquid motive fluid. During this action vapours - corresponding
Operating Instructions
Operating Instructions www.fuelcellstore.com sales@fuelcellstore.com E101/E102 Electrolyser 5 / 10 E103/E104 Electrolyser Cell5 / Cell10 Overview Electrolyser side of the gas storage tank Compensation
CPE562 Chemical Process Control HOMEWORK #1 PROCESS & INSTRUMENTATION DIAGRAM
Faculty of Chemical Engineering CPE562 Chemical Process Control HOMEWORK #1 PROCESS & INSTRUMENTATION DIAGRAM SUBMISSION DATE: 1 OCT. 2012 Question 1 Name the following equipments based on standard P&ID
PTRT 2470: Petroleum Data Management 3 - Facilities Test 4 (Spring 2017)
Use scantron to answer all questions PTRT 2470: Petroleum Data Management 3 - Facilities Test 4 (Spring 2017) 1. The term dehydration of natural gas means A. addition of water vapor B. removal of water
44 (0) E:
FluidFlow Relief Valve Sizing Handbook Flite Software 2016 Flite Software N.I. Ltd, Block E, Balliniska Business Park, Springtown Rd, Derry, BT48 0LY, N. Ireland. T: 44 (0) 2871 279227 E: sales@fluidflowinfo.com
Operating Instructions
Operating Instructions Preparation for Start-up 1. If the computer system is logged off, log into the computer system. Log into the operator account on the computer. Please ask your TA for username and
OPERATING PROCEDURES
OPERATING PROCEDURES 1.0 Purpose This element identifies Petsec s Operating Procedures for its Safety and Environmental Management System (SEMS) Program; it applies to all Petsec operations. Petsec is
Liquid ring compressors
Liquid ring compressors KPH 85220, KPH 85227 Compression pressures: Suction volume flow: 2 to 7 bar 940 to 1450 m³/h CONSTRUCTION TYPE Sterling SIHI liquid ring compressors are displacement compressors
Scaling Up Safely: Making Smarter Decisions about Rate Dependency
Scaling Up Safely: Making Smarter Decisions about Rate Dependency Zubin Kumana, P.E., Venkata Badam,P.E., and Achilles Arnaez, P.E. 7600 W. Tidwell Rd., Ste. 600 Houston, TX 770400 (713) 802-2647 SmithBurgess.com
Bobtail DOT 407 / 412 Vacuum
PROCO INCORPORATED AUGER OPERATION Manual Bobtail DOT 407 / 412 Vacuum Vacuum Tank Operation This vacuum tank has been built for Dot work. Extreme care must be exercised regarding product handling. The
Liquid ring compressor
Liquid ring compressor KLH 47005, KLH 47105 Compression pressures: Suction volume flow: 2 to 11 bar 56 to 65 m³/h CONSTRUCTION TYPE Sterling SIHI liquid ring compressors are displacement compressors of
PRESSURE EQUIPMENT EXEMPTION ORDER. User Guide for. Pressure Equipment Exemption Order. Alberta Regulation 56/2006
the pressure equipment safety authority PRESSURE EQUIPMENT EXEMPTION ORDER User Guide AB-529 REV. 1, 2017-06-06 User Guide for Pressure Equipment Exemption Order Alberta Regulation 56/2006 With amendments
Removing nitrogen. Nitrogen rejection applications can be divided into two categories
Removing nitrogen Doug MacKenzie, Ilie Cheta and Darryl Burns, Gas Liquids Engineering, Canada, present a comparative study of four nitrogen removal processes. Nitrogen rejection applications can be divided
FLUID DYNAMICS Ch.E-204 Umair Aslam Lecturer Department of Chemical Engineering
FLUID DYNAMICS Ch.E-204 Umair Aslam Lecturer Department of Chemical Engineering Fluid Mechanics is the branch of physics that studies fluids (liquids, gases, and plasmas) and the forces on them. Fluid
Features. General application. Technical data
Practical, simple and cost-effective alternatives for process industries to purge gases from chambers, exhaust, evacuate or prime using liquid, steam or air operating media Features Simple design with
GAS COMPRESSION SYSTEM
GAS COMPRESSION SYSTEM The gas compression system at HI 376 A consists of two natural gas turbine-driven Compressors (CBA-4020/4070). Both Compressors are needed for the volume of gas being compressed.
SAMSON SOLUTIONS Energy and Power (Critical Applications)
SAMSON SOLUTIONS Energy and Power (Critical Applications) Speakers: Ing. Gianluigi Rossi Ing. Stefano Salvadori Managing Director - SAMSON Italy Head of Sales and Project Department - SAMSON Italy MARKET
CO2 Compressor Operation Equipment Function and Layout
An Intensive 5 Day Training Course CO2 Compressor Operation Equipment Function and Layout 17-21 Sep 2018, Amsterdam 26-JUN-18 This course is Designed, Developed, and will be Delivered under ISO Quality
Liquid ring vacuum pumps in compact design
Liquid ring vacuum pumps in compact design, Pressure range: Suction volume flow: 33 to 113 mbar 3 to 58 m³/h CONSTRUCTION TYPE SIHI liquid ring vacuum pumps are displacement pumps of uncomplicated and
DISTILLATION POINTS TO REMEMBER
DISTILLATION POINTS TO REMEMBER 1. Distillation columns carry out physical separation of liquid chemical components from a mixture by a. A combination of transfer of heat energy (to vaporize lighter components)
Fundamentals Of Petroleum Engineering PRODUCTION
Fundamentals Of Petroleum Engineering PRODUCTION Mohd Fauzi Hamid Wan Rosli Wan Sulaiman Department of Petroleum Engineering Faculty of Petroleum & Renewable Engineering Universiti Technologi Malaysia
TABLE OF CONTENT
Page : 1 of 22 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia S) TABLE OF CONTENT SCOPE 2 VESSELS
Use equation for the cylindrical section and equation or for the ends.
Solution 13.1 See section 13.3.4, equations 13.7 to 13.18 Solution 13.2 Use equation 13.34. (a) rigid constant C = 0.43 (b) free to rotate, C = 0.56 Solution 13.3 See section 13.5.1 Use equation 13.39
Subparts AA and BB - The Other RCRA Air Rules. Beginners aabb
Subparts AA and BB - The Other RCRA Air Rules Beginners aabb 1 Background Subpart AA - Process vents Subpart BB - Equipment leaks Subpart CC - Tanks, surface impoundments, containers. Also includes Subpart
Compressors. Basic Classification and design overview
Compressors Basic Classification and design overview What are compressors? Compressors are mechanical devices that compresses gases. It is widely used in industries and has various applications How they
Requirements for Reduced Supervision of Power Plants, Thermal Liquid Heating Systems, and Heating Plants
the pressure equipment safety authority Requirements for Reduced Supervision of Power Plants, Thermal Liquid Heating Systems, and Heating Plants AB-528 Edition 2, Revision 1 Issued 2016-09-12 Table of
Manual for continuous distillation
Manual for continuous distillation 1. Week 1: Objectives: Run the column at total reflux. When steady state is reached, take the sample from the top and bottom of the column in order to determine the overall
Pressurised Oxygen Supply for CO 2 Capture Applications
Pressurised Oxygen Supply for CO 2 Capture Applications Paul Higginbotham and Vince White Air Products PLC, Hersham Place, Molesey Road, Walton-on-Thames, Surrey, KT12 4RZ, UK September, 2013 1 Purpose
Liquid ring vacuum pumps in compact design
Liquid ring vacuum pumps in compact design LEM 25, LEM 5 Pressure range: Suction volume flow: 33 to 113 mbar 4 to 6 m³/h CONSTRUCTION SIHI liquid ring vacuum pumps are displacement pumps of uncomplicated
Permitted MSS Emissions Tracking, Recordkeeping, and Reporting. Presented by ACES April 24, 2008
Permitted MSS Emissions Tracking, Recordkeeping, and Reporting Presented by ACES April 24, 2008 1 Agenda Introductions Overview of Current MSS Permitting Program Status Discussion of Model MSS Permit Requirements
Chemistry 261 Laboratory Experiment 6: Reduced Pressure Distillation of a Mixture of High Boiling Alcohols
Chemistry 261 Laboratory Experiment 6: Reduced Pressure Distillation of a Mixture of High Boiling Alcohols Reading from Zubrick, 10 th edition Jointware, pages 30-40 Sources of Heat, pages 131-139 Clamping,
Safety in Petroleum Industry
Chemical ( Industrial ) Disaster Management Conference, Bangalore 30 January 2014 Safety in Petroleum Industry Refineries and Petrochemical plants are highly energyintensive Handle highly inflammable and
Troubleshooting Guide. Pg. 1
Troubleshooting Guide Pg. 1 Introduction to Automotive HVAC: Introduction to an AC System Review of AC System and components. Pg. 2 Troubleshooting: AC system Components AC System and its Components Receiver/
FRAC FLUIDS AND WATER USAGE Evaluating The Commercial Viability and Success In Using Water-Free Fracs
FRAC FLUIDS AND WATER USAGE Evaluating The Commercial Viability and Success In Using Water-Free Fracs Overview of Presentation BlackBrush Oil & Gas Natural Gas Liquids (NGLs) as frac fluid. Advantages
2016 Fall Refining and Equipment Standards Meeting
2016 Fall Refining and Equipment Standards Meeting November 14-17, 2016 Hyatt Regency New Orleans New Orleans, Louisiana www.api.org/meetings Current as of October 18, 2016 Subject to change Pre- & Post-Week
USE OF NONCONTACTING SEALS IN VOLATILE SERVICES
USE OF NONCONTACTING SEALS IN VOLATILE SERVICES by Bob Goodenberger Regional Engineer, South Central Region John Crane Inc. Webster, Texas Douglas E. Barron Reliability Analyst ChevronPhillips Chemical
Multiple Pressure Booster Systems With Variable Speed Controller Type BL
Multiple Pressure Booster Systems With Variable Speed Controller Type BL General Characteristics - Single or multistage pumps - Horizontal or vertical mounting - Total head 30m ~ 250m - Material construction:
GAS DEHYDRATION SYSTEM
GAS DEHYDRATION SYSTEM High pressure and compressed gases flow through the Gas Scrubber (MBF-4540) to the Glycol Contactor (MAF-0900). In the Contactor, gas flows through trays, contacting the lean glycol
TUTORIAL. NPSHA for those who hate that stuffy word. by Jacques Chaurette p. eng. copyright 2006
TUTORIAL NPSHA for those who hate that stuffy word by Jacques Chaurette p. eng. www.lightmypump.com copyright 2006 page.2 NPSHA for those who hate that stuffy word This article follows the same approach
Technical Information
Technical Information Installation, Operation, Installation, Operation and Maintenance and Maintenance Manual Manual Balston Model 75700-K728 Nitrogen Generator Figure 1-75700-K728 Overall Dimensions These