Regulator. Accessory. Description. Symbol. Nil. With bracket. B With round. Port size. (Without limit indicator) With set nut (For panel mount)
|
|
- Maximillian Hill
- 5 years ago
- Views:
Transcription
1 eries R 2- ow to Order opper, fluorine and silicon-free + Low particle generation il hread type Rc 0 R 03 2 R 03 ody size / ith bracket Round pressure ith set nut tandard specifications odel luid roof pressure aximum operating pressure et pressure range port size Relief pressure mbient and fluid temperature onstruction rease part no. racket assembly ote 5) ote ) article generation grade (Refer to front matter pages 3 to 22 for details.) 0.02 to 0.2 a setting on-relieving type low direction: Right to left pward handle ombination ame plate and pressure in imperial units (I, ).0a 0.2a ort size 3/8 /2 /2-R /2-R /2-R ote ) il ith round ote 2) pressure (ithout limit indicator) R escription ith bracket to ote ) Optional parts are not assembled and are supplied loose at the time of shipment. ote 2) mounting screw is for R to, and for R to 0. ressure is 49 type. /2-R Option il ote 3) R ote 4) escription 0.02 to 0.2 a setting on-relieving low direction: Right to left pward handle hen more than one specification is required, indicate in ascending alphanumeric order. ote 3) he only difference from the standard specifications is the adjusting spring for the regulator. It does not restrict the setting of 0.2 a or more. ote 4) or thread type. his product is for overseas use only according to the new easurement Law. (he I unit type is provided for use in apan.). pplicable regulator R /2-R to /2-R to 0 /2-R,, 3/8, 3/8, 3/8, /2 ir.5 a.0 a 0.05 to 0.85 a et pressure a (at relief flow rate of 0. l/min (R)) 5 to 0 (o freezing) Relieving type : luorine grease 2-: Lithium soap based grease : rade 2-: rade R-2 R-2 R-2 R-2 R ody size /2-R /2-R /2-R /2-R-0 /2-R ote 5) ssembly includes a bracket and set nuts. ote ) ssembly includes a bracket and 2 mounting screws. ote ) in part numbers for a pressure indicates a type of connection thread. o indication is necessary for R; however, indicate for. lean series / pplicable ith set nut (or panel mount) pplicable ame plate and pressure in imperial units (I, ) /2-R, /2-R ote ) R pplicable ombination available ombination not available combinations aries depending on the vailable only with thread /2-R0 /2-R0 ote ) R
2 imensions R to -0 R port size ir cylinder I pplicable tubing ø/4 racket assembly ø Rotary actuator anel fitting dimension ir gripper I late thickness /2-R/: ax. /2-R: ax. 5 irectional control valve R/0 low control port size I pplicable tubing ø/4 ø ilter, ressure control racket assembly ittings & ubing ir preparation odel /2-R /2-R /2-R /2-R /2-R-0 /2-R /2-R0,, 3/8, 3/8, 3/8, /2, ressure port size 5 95 tandard specifications ith pressure ote) or /2-R only, the position of the pressure is above the center of the piping ote) specifications racket mounting size anel mount x 32 x.5 38 x.5 42 x.5 42 x.5 9 ressure switch lean gas filter
3 eries 2- R with back flow mechanism ow to Order opper, fluorine and silicon-free + Low particle generation tandard specifications odel luid roof pressure aximum operating pressure et pressure range port size Relief pressure mbient and fluid temperature onstruction rease il part no. hread type Rc racket assembly ote 5) ote ) 0 R 2 R ody size ort size 3/8 /2 article generation grade (Refer to front matter pages 3 to 22 for details.).0a 0.2a /2-R /2-R /2-R /2-R /2-R-0 /2-R /2-R0,, 3/8, 3/8, 3/8, /2 ir.5 a.0 a 0.05 to 0.85 a et pressure a (at relief flow rate of 0. l/min (R)) 5 to 0 (o freezing) Relieving type : luorine grease 2-: Lithium soap based grease : rade 2-: rade pplicable /2-R /2-R /2-R /2-R /2-R-0 /2-R /2-R0 R-2 R-2 R-2 R-2 R ote ) Option ote 5) ssembly includes a bracket and set nuts. ote ) ssembly includes a bracket and 2 mounting screws. ote ) in part numbers for a pressure indicates a type of connection thread. o indication is necessary for R; however, indicate for. lean series ith back flow mechanism / ith bracket Round pressure ith set nut 0.02 to 0.2 a setting on-relieving type low direction: Right to left pward handle ody size 0 / il ote 2) ombination ame plate and pressure in imperial units (I, ) 03 R escription ith racket ith round pressure (ithout limit indicator) ith set nut (or panel mount) pplicable to ote ) Optional parts are not assembled and are supplied loose at the time of shipment. ote 2) mounting screw is for size to, and for to 0. is 49 type. il ote 3) R escription 0.02 to 0.2 a setting on-relieving low direction: Right to left pward handle ote 4) ame plate and pressure in imperial units (I, ) hen more than one specification is required, indicate in ascending alphanumeric order. ote 3) he only difference from the standard specifications is the adjusting spring for the regulator. It does not restrict the setting of 0.2 a or more. ote 4) or thread type. his product is for overseas use only according to the new easurement Law. (he I unit type is provided for use in apan.)., R-2 ote ) pplicable ombination available ombination not available combinations aries depending on the vailable only with thread pplicable regulator with backflow mechanism R /2-R to /2-R to 0 R-2 ote )
4 imensions R to -0 with back flow mechanism R port size ir cylinder I pplicable tubing ø/4 racket assembly ø Rotary actuator anel fitting dimension ir gripper I late thickness /2-R, : ax. /2-R: ax. 5 irectional control valve R/0 low control port size I pplicable tubing ø/4 ø ir preparation ilter, ressure control racket assembly ittings & ubing odel /2-R /2-R /2-R /2-R /2-R-0 /2-R /2-R0,, 3/8, 3/8, 3/8, /2, ressure connection port size 5 95 tandard specifications ith pressure ote) or 0/2-R only, the position of the pressure is above the center of the piping ote) specifications racket mounting size anel mount x 32 x.5 38 x.5 42 x.5 42 x.5 ressure switch lean gas filter
5 .R. recautions e sure to read before handling. esign. he standard bowl for the air filter and filter regulator are made of polycarbonate. o not use in an environment where they are exposed to or come in contact with organic solvents, chemicals, cutting oil, synthetic oil, ester based compressor oil, alkali, and thread lock solutions. 2. void applications where pressurized air is frequently introduced to and released from the standard bowl of an air filter, or filter regulator. It may cause the bowl to be damaged. se of a metal bowl is recommended for such applications. 3. and filter regulator e sure to install a safety device to prevent damage or malfunction of the outlet side components when the output pressure exceeds the set pressure value. aution. elect a that is suitable for desired purity by referring to the 's est neumatics catalog. 2. omponents cannot be used for applications that are outside the range of specifications. lease consult with when you anticipate using the component outside the range of its specifications (such as temperature and pressure). 3. ist separator and micro mist separator esign the system so that the mist separator and micro-mist separator are installed where there is less pulsation. pressure difference between internal and external pressure inside the element should be kept within 0. a, as exceeding this value can cause damage.. he grease (: luorine, 2-: ineral) used on internal sliding parts and seals may run down to outlet side components. lease consult with if this is not desirable. 2. and filter regulator election ) Residual pressure release (outlet pressure release) is not complete by releasing the inlet pressure. o release residual pressure, select a with a back flow mechanism. sing a without a back flow mechanism makes for inconsistent residual pressure release (i.e., residual pressure may or may not be released) depending upon the operating conditions. 2) lease contact if air will not be consumed in the system for a long period of time, or if the outlet side will be used with a sealed circuit and a balanced circuit, as this may cause the set pressure of the outlet side to fluctuate. 3) et the regulating pressure range for the outlet pressure of the regulator in a range that is 85% or less of the inlet pressure. If set to above 85%, the outlet pressure will be easily affected by fluctuations in the flow rate and inlet pressure, and become unstable. 4) safety margin is calculated into the maximum set pressure range appearing in the catalog's specification table. herefore, the outlet pressure may exceed the set pressure. 5) lease contact when a circuit requires relief sensitivity or setting accuracy with high precision. 4. and filter regulator ir consumption is 0. l/min (R) or less under standard specifications. lease consult with, if this value is not allowable. 800
6 .R. recautions 2 e sure to read before handling. aution ounting. o avoid reversed connections of the air inlet/outlet, make connections after confirming the "I/" mark or arrows that indicate the direction of air flow. Reversed connections can cause malfunction. 2. omponents with a bowl, e.g., air filter, filter regulator must be installed vertically with the bowl downward so that faulty drain discharge and dripping can be verified. 3. Ensure sufficient top, bottom, and front clearance for maintenance and operation of each component. Refer to the dimensions section for the minimum clearance for each component. 4. and filter regulator e sure to unlock the knob before adjusting the pressure and to lock it after the pressure is set. 5. rain piping ) he drain guide bowl of a filter or filter regulator is not provided with a valve function to exhaust drainage. Install valves onto the drain guide before supplying air to discharge air and drainage. 2) hen piping the drain guide bowl of the filter or filter regulator, first secure the drain guide with a wrench. ailure to secure the drain guide may result in bowl damage. aution ir supply. hen there is excessive drainage Install the dryer or water separator (rain atch) before the air filter or filter regulator. djustment. and filter regulator ) et the regulator while verifying the displayed values of the inlet and outlet pressure s. urning the knob excessively can cause damage to the internal parts. 2) o not use a tool on the pressure regulator knob as this can cause damage. It must be operated manually.. and filter regulator ) e sure to check the inlet pressure before setting the outlet pressure. 2) he pressure included with regulators for 0.02 to 0.2 a setting is for up to 0.2 a only. o not apply pressure exceeding 0.2 a. It can damage the pressure. 3) o set the pressure using the knob, turn the knob in the direction that increases pressure and lock the knob after the pressure is set. If this is done in the direction that decreases pressure, the pressure may drop from the original set pressure. urning the knob clockwise increases the outlet pressure, and turning it counterclockwise reduces the pressure.. o screw piping materials into components, tighten with a recommended tightening torque while holding the female thread side. If the minimum tightening torque is not observed, this can cause a looseness and seal failure. On the other hand, excess tightening torque can cause damage to the thread. urthermore, tightening without holding the female thread side can cause damage due to the excess force that is applied directly to the piping bracket. Recommended tightening torque orque aution onnection thread to 9 2 to 4 iping 3/8 22 to 24 /2 28 to 28 to nit: m to 38 ir cylinder Rotary actuator ir gripper irectional control valve ittings & ubing lean gas filter ressure switch low control ilter, ressure control ir preparation 80
7 .R. recautions 3 e sure to read before handling. aintenance. hen disassembly or installation is required during the maintenance, repair, or replacement of a device, be sure to follow the instructions provided in the instruction manual or safety instructions in this catalog. 2. erform periodical inspections to detect any cracks, scratches, or other deterioration of the transparent resin bowl of the air filter and filter regulator. Replace with a new bowl or metal bowl when any kind of deterioration is found, otherwise this can cause damage. 3. erform periodical inspections to detect dirt on the transparent resin bowl of the air filter and filter regulator. hen you find dirt on any of the above devices, clean with a household neutral detergent. o not use other cleaning agents, otherwise this can cause damage. 4. ir filter ) Replace the element every 2 years or when the pressure drop becomes 0. a, whichever comes first, to prevent damage to the element. 2) Release accumulated condensate periodically before it reaches the maximum capacity. ondensate that flows out to the outlet side can cause malfunctions. 5. ist separator and micro mist separator ) Replace the element every 2 years or when the pressure drop becomes 0. a, whichever comes first, to prevent damage to the element. 2) Release accumulated condensate periodically before it reaches the maximum capacity. ondensate that flows out to the outlet side can cause malfunctions. aution. erform periodical inspections of the filter element and replace it as necessary. heck the element whenever the outlet pressure drops below normal or air does not flow smoothly during operation. 2. and filter regulator heck the sliding part or seat of the internal valve when a setting malfunction or relief leakage occur and temporary or emergency repairs need to be made. 802
Filter regulator. Accessory. Description. Symbol. B With bracket With round. Port size. (Without limit indicator) Body size.
eries ow to Order opper, fluorine and silicon-free + Low particle generation il ote 1) ote 2) part no. lean series hread type Rc racket assembly ote ) ote 9) 1.0a 0.2a / -20 49-01 49-2-01 ilter regulator
More informationFilter Regulator 21 AW 30 K F 03 BG JN. Description. Without backflow function. Rc NPT 1/8 1/4 3/8 1/2 3/4
eries eries ilter Regulator ilter Regulator with ackflow unction ow to Order lean series opper, fluorine and silicon-free low particle generation ilter regulator 10 03 21 03 q w e r t y "" must always
More informationSeries ACG/ARG/AWG. Regulator with Built-in Pressure Gauge Filter Regulator with Built-in Pressure Gauge
Regulator with uilt-in ressure auge ilter Regulator with uilt-in ressure auge Series /R/W - - - R- L- W- R L W V Visibility of pressure gauge is improved in various installation places When mounting on
More informationModel AWG20 AWG30 AWG40 AWG20K AWG30K AWG40K
Modular Type ilter Regulator with uilt-in Pressure auge eries W ilter Regulator with uilt-in Pressure auge eries W ominal filtration rating ccessory W2 /8, /4 W3 /4, 3/8 W /4, 3/8, /2 racket Pages 424
More informationRegulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K
Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK,
More informationRegulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K
Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK
More informationF.R.L. Units Precautions 1 Be sure to read this before handling.
Precautions 1 1. Confirm the specifications. Products represented in this catalog are designed only for use in compressed air systems (including vacuum). Do not operate at pressures or temperatures, etc.,
More informationM9N. Nil. s n. Type of auto switch. Refer to the table below for auto switch part numbers.
eries XP/XP ir slide table ø, ø1, ø12, ø1 ow to Order lean series 11 acuum suction type 11 XP 12 1 9N 22 XP 12 1 9N opper, fluorine and silicon-free + low particle generation 22 acuum suction type ore
More informationFilter-Regulator-Lubricator
Filter-Regulator-Lubricator 1/2" NPT Inlet/Outlet Ports PD16.19 July, 2016 Machine Parts & Operating Instructions Save This Document and Educate All Personnel WARNING Always follow the safety instructions
More informationFilter-Regulator-Lubricator
Models: 10671-1/2" NPT Filter 10673-1/2" NPT Regulator 10675-1/2" NPT Lubricator 10677-1/2" NPT Filter-Regulator 10679-1/2" NPT Regulator-Lubricator 10681-1/2" NPT Filter-Regulator-Lubricator Parts Page
More informationF.R.L. Units Precautions 1 Be sure to read this before handling products.
Precautions 1 1. Confirm the specifications. Products represented in this catalog are designed only for use in compressed air systems (including vacuum). Do not operate at pressures, temperatures, etc.,
More informationRegulator: Modular Type with Back flow Mechanism. AR30K to 60K. Body size. Port size 1/4 3/8 1/2 3/4 AR40 AR50 3/4 1/2
Regulator: Modular Type with ack flow Mechanism R3 to 6 How to Order Regulator with a built-in mechanism that ensures a quick release of the outlet air pressure (built-in check valve with back flow mechanism).
More informationHow to Order. Rc NPT 1/8 1/4 3/8 1/2
AWM 3 AWD 3 Mist Separator Regulator AWM2 to AWM4 Micro Mist Separator Regulator AWD2 to AWD4 3 E 3 E How to Order Mist Separator Regulator 1 2 Micro Mist Separator Regulator The AWM series is made up
More informationModular Type Regulators
Modular Type Regulators Series AR AC Regulator Series AR Port size Options AFARAL, 1/4 Bracket AFAR AWAL AR4-A, 1/2 Round type pressure gauge With set nut (for panel mount) AFAFMAR P.45 to 5 AR4-6-A ot
More informationSeries SFD. Clean Air Filter. Variations. Made to Order. Type. Cartridge (replaceable element) Disposable (non-replaceable element) Up to 100
Clean Air Filter Variations SFD SFD SFD SFD Made to Order Type Disposable (non-replaceable element) Cartridge (replaceable element) Flow rate L/min (ANR) (at inlet pressure.7 MPa) Up to 6 Up to 8 Up to
More informationNew Product. Air Consumption 70% Down. Precision Regulator Air Saving Type. RPE Series PRECISION REGULATOR RPE SERIES CC-1072A
Air Consumption 70% Down New Product Precision Regulator Air Saving Type RPE Series PRECISION REGULATOR RPE SERIES Large Air Saving CC-1072A Air Consumption 70% Down. New Type Eco-friendly Precision Regulator
More informationMaximum 0.85 MPa pressure setting Long-life, high flow perfect for balancer applications
Outstanding performance in extremely low pressure and low pressure ranges from 0.003 to. Realizing high performance, energy saving, and compact size. Realize precise pressure control in a pressure range
More informationRegulator for 2 MPa ARX 20. How to Order. Bracket. Pressure gauge. Port size 1/8 1/4. Panel nut
Regulator for 2 MPa RX 2 How to Order RX2 1 Regulator 1 Regulating pressure.5 to.85mpa {.51 to 8.7kgf/cm²}.5 to.3mpa {.51 to 3.1kgf/cm²} Thread type Nil N F Rc(PT) NPT (PF) Port size 1 2 ccessories/options
More informationALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa 0. MPa.0 MPa (Note
More informationDirect Operated Precision Regulator Modular Style. Standard Specifications
1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com
More informationClean Regulator/Fluororesin Type
Clean egulator/fluororesin Type Series Washing/ssembly Procedure Washing parts: ody, Valve diaphragm and Diaphragm Parts Degreasing washing DI water washing lcohol washing ssembly Inspection Wetted part
More informationALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa Max. operating pressure
More informationRelated Products: Auto Drain Valve. Model/Specifications. Model
Related Products: Auto Drain Valve /600 Drainage is automatically discharged in a reliable manner, without requiring human operators. Highly resistant to dust and corrosion, operates reliably, and a bowl
More informationPower Valve: Precision Regulator. High precision, large capacity relief regulator
Power Valve: Precision Regulator Series VEX High precision, large capacity relief regulator port large exhaust capacity pressure reducing valve which utilizes a nozzle flapper mechanism available as air
More informationModular F.R.L. Units. New. New. Series AC 46% Better visibility and environmental resistance. Energy saving regulator
Modular F.R.L. Units New RoHS etter visibility and environmental resistance Double layer design The bowl is covered with a transparent bowl guard! The inside is visible from 36. The bowl is completely
More informationRecommended applicable tubing. Specifications. Operating vacuum pressure. 20 C to 80 C Threads. Principal parts material
Series K Clean one-touch fittings For blowing Recommended applicable olyolefin: Series T Tubing material Soft polyolefin: Series TS Tubing O.D. ø, ø, ø, ø, ø olyurethane Series TU, Nylon Series T, and
More informationCompact Regulator. ARX20 Series. 2.0 MPa compatible, piston type compact regulator ARJ
Compact Regulator 2 Series 2. MPa compatible, piston type compact regulator V SR X AP1 Compatible with inlet supply pressure of 2. MPa Employs a knob shape for easy operation Compact type (face to face
More informationThin pressure gauge. G401-W Series. Symbol Descriptions. A Connection A A. B Pressure display [MPa] P04 0 to 0.4MPa P10 0 to 1.
Thin pressure gauge G401-W Series Thin, compact design ideal for incorporating devices. Suitable for filter regulator, regulator, and pressure switch (P4000-W). onnection: O ring seal, set screw G401-W
More informationSeries 10-IRV10/20. Vacuum Regulator C08 IRV C08 IRV 20 A. How to Order. Standard connections. Single sided connections. Accessory w Nil G ZN ZP ZA ZB
Vacuum egulator eries -IV/ How to Order tandard connections IV C08 traight Clean series ody size Max. flow 140 L/min (N) Max. flow 240 L/min (N) L Fittings traight Connection tubing O.D. ymbol ubing O.D.
More informationPilot Check Valve: Metal Body Type
INFORMATION Pilot Check Valve: Metal Body Type The use of a metal body improves strength and environmental resistance. Temporary intermediate stops are possible. *1 *1 Precise intermediate stops are not
More informationRelated products. Components for air preparation and pressure adjustment / F.R.L. unit. Pressure gauge. Indidcator
Related products Pressure gauge / indicator omponents preparation and pressure adjustment / unit Refrigerating ir uto. drain ir Pressure gauge ONTENTS Pressure gauge assembly (G401-W) 660 With safety mark
More informationVacuum Regulator. IRV10/20 Series. Weight reduced by. RoHS ARJ ARX AMR ARM ARP IR -A IR IRV VEX SRH SRP SRF ITV
Vacuum egulator IV0/ eries oh AJ A45 ingle ided Connections eries AX For ease of installation and panel mounting AM AM Integrated digital pressure switch for panel mounting I -A I (Made to Order) ingle
More informationMINIATURE COMBINATION UNITS Filter/regulators and lubricators P1H - G1/8, G1/4
P1H INITURE COINTION UNITS ilter/regulators and lubricators P1H - 1/8, 1/4 Combinations of filterregulators and lubricators can be ordered as pre-assembled units Complete control of filtration, regulation
More informationSeries AMJ. Drain Separator for Vacuum
CAT.E 827- Drain Separator for Vacuum Remove water droplets from air by simply installing in vacuum equipment connection lines. Effective for removing water droplets from the air sucked into vacuum pumps
More informationSeries variation. Silencer. High damping effect and 2 types of materials. Applicable cylinder bore size (mm) Effective sectional area (mm 2 )
Series variation High damping effect and types of materials Model / appearance Metering valve with silencer Model no. SMW-6 SMW-8 FMS-M SMW- SMW- (R) M M /8 / /8 / / / / 6 8 Effective sectional area (mm
More informationIR1000-A IR1010-A IR1020-A
Document No. IR -OMT0020 PRODUCT NAME Precision Regulator MODEL / Series / Product Number IR1000-A IR1010-A IR1020-A Contents Safety Instructions 1 to 5 1. Application 6 2. Specifications 6 3. Construction
More informationDiscontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves.
Powers Controls RV 201 Pressure Reducing Valves Description Features Product Numbers Dual Pressure PRV Technical Instructions Document No. 155-049P25 RV 201-1 Single Pressure PRV The RV 201 Pressure Reducing
More informationModular Air Combination Units
...... 12-25 NAC1 ~ 6 series.................................. 12-16 Filter + Regulator + Lubricator NAC11 ~ 41 series.................................. 17-18 Filter/Regulator + Lubricator NAC12 ~ 62 series..................................
More informationlternative odels 3.87 (98) anual Drain 2.67 (68) 3.72 (94) utomatic Drain 2.13 (54) 1.12 (28) P1H, PTH Filter/Regulator-Lubricator Combination Units 0
ir line equipment P1H, PTH Filter/Regulator- Lubricator Combination Units 07 Series Compact design Filter removes liquids and solid particles down to 5 µm Push to lock adjusting knob with tamper resistant
More informationALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Auto feed lube 00 00-0 00 00 00 900 - --IS- -9 AIR : OIL : Fluid Proof pressure Air. MPa 0. MPa.0 MPa (Note ) Operating pressure differential
More informationSelf-priming makes priming unnecessary Exhausts the air inside the suction pipe to suck up liquid. Air operated type.
Process Pump Series 3/5 Automatically Operated Type (Internal Switching Type)/Air Operated Type (External Switching Type) High abrasion resistance and low particle generation o sliding parts in wetted
More informationPrecision Regulator. Series Model Regulating pressure range Port size Page
Precision Regulator Series // Basic Type Air Operated Type Series Model Regulating pressure range Page Series Series Series Series Series.5 to MPa. to MPa. to.8 MPa /8 55.5 to MPa. to MPa /4 55. to.8 MPa.
More informationBooster Regulator/Air Tank
Booster Regulator/Air Tank Increase factory air pressure by up to 4 times! Air-only operation requires no power supply, reduces heat generation, and Boost pressure allows easy installation. NEW Renewed
More informationOperating Manual. R280 Pressure regulator made of brass. 1. Intended Use
Pressure regulator made of brass Operating Manual 1. Intended Use Line or outlet pressure regulators- /reducer for Air, gases and liquids which is designed to effect reduction to a downstream pressure
More informationComponents for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly.
Components preparation and pressure adjustment ABP Overview ABP is a component that enables boosting by s only up to twice primary pressure (.0MPa max.) in combination with using air tank but not using
More informationHow to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
More informationIP2M, IP2AM and IP2DM Monnier International Compressed Air Filter/ Regulators
L ocal regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification
More informationTypes 749B and R130 Changeover Manifolds
Instruction Manual MCK-1179 Types 749B and R130 June 2012 Types 749B and R130 Changeover Manifolds TYPE HSRL-749B TYPE 64SR/122 TYPE R130/21 TYPE 749B/21 Figure 1. Changeover Manifolds and Regulator Assemblies
More informationThe plastic bowl guard does not corrode. The draining method is selectable between the push type and the auto drain type.
he plastic bowl guard does not corrode. he draining method is selectable between the push type and the auto drain type. he air filter is designed for draining and removal of foreign matter. (Element: 5µm)
More informationFlow Characteristics NAR1 NAR 9 6 M5X.8 NAR2 NPT 3/ Flow (scfm) NAR5 NPT 3/ Flow (scfm) Flow (
How To Order NAR 1, 2, 25,, 4, 5, 6 Regulator Body size 1 M5 2 1/8 25 1/4 3/8 4 1/2 5 3/4 6 1 NAR N 3 BG 1N Port Thread Nil Rc(PT) F G(PF) N NPT Accessories and Combinations Accessory Suffix 1 4 N R Port
More informationPVC Quick Drain Valve
PVC Quick Drain Valve LVW Series Complies to JIS standard for polyvinyl chloride piping (JIS K 6742) Applicable fluids: Deionized water, Chemical liquids Application Example Cleaning Equipment Process
More informationRHPS Series PRV 2 all types of connections User Manual
RHPS Series PRV 2 all types of connections User Manual Read the complete manual before installing and using the valve. Before removing a valve from the system for service, you must depressurize system
More informationMounting and Operating Instructions EB EN. Type Supply Pressure Regulator. with increased air capacity
Type 4708-45 Supply Pressure Regulator with increased air capacity Translation of original instructions Mounting and Operating Instructions EB 8546-1 EN Edition March 2016 Note on these mounting and operating
More informationRHPS Series PRV 6 User Manual
RHPS Series PRV 6 User Manual Read the complete manual before installing and using the valve. 1 WARNING Before removing a valve from the system for service, you must depressurize system purge the system
More informationAir operated valve. VGA342R Series
Doc. No.VG300***-OMH0006-A PRODUCT NAME Air operated valve MODEL / Series / Product Number VGA342R Series Contents Safety Instructions ----------------------------------------------------------------------------
More informationLUBRICATOR ASSEMBLY AND OPERATING INSTRUCTIONS
AIR FILTER, REGULATOR AND LUBRICATOR 4035 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 004 by Harbor Freight
More informationSeries VBA1110 to 4200
Booster Regulator Series 0 to 4200 Specifications increase ratio Max. supply pressure Set pressure range Ambient and fluid temperature Lubrication Installation adjustable mechanism 0-02 400-04 Handle operated
More informationModel GPR Primary Pressure Regulating Valve. Instruction Manual
Model GPR-2000 Primary Pressure Regulating Valve Instruction Manual Please read this instruction manual thoroughly before using the primary pressure regulating valve, so that you may do so correctly and
More informationOPERATING AND MAINTENANCE MANUAL
Series 4300 Engineered Performance TABLE OF CONTENTS 0 INTRODUCTION 1 1 Scope 1 2 Description 1 3 Specifications 1 0 INSTALLATION 1 1 Mounting 1 2 Piping 1 1 Connecting Process Pressure 2 2 Vent Connections
More informationDoc. No.SYJ300-OMO0002-A. Air Operated Valve PRODUCT NAME. SYJA300 / SYJ3000 Series MODEL/ Series
Doc. Air Operated Valve PRODUCT NAME SYJA300 / SYJ3000 Series MODEL/ Series Contents Safety Instructions ---------------------------------------------------------------------------- 2,3 Precautions on
More information/ Air Line Kit AL - M1202. / OPERATION MANUAL P1 - P9 / English P11 - P19 OM-K0651
/ Air Line Kit AL - M1202 / OPERATION MANUAL P1 - P9 / English P11 - P19 OM-K0651 002 1 Thank you for purchasing the Air Line Kit " AL - M1202 ". This Air Line Kit is designed to adjust the air supply
More informationSeries AS-FPQ/AS-FPG. Speed Controller with One-touch Fitting for Clean Room. Speed controllers for clean room use
CAT.ES20-19 A Speed Controller with One-touch Fitting for Clean Room Series AS-FPQ/AS-FPG Series AS-FPG Series AS-FPQ Speed controllers for clean room use AS-FPQ: Brass (electroless nickel plated) and
More informationOperation Manual Air Saver Unit ASV5000 Series
9IM-V066-b Operation Manual Air Saver Unit ASV5000 Series Thank you for your choice of Kuroda Pneumatics LTDs product on this time. Please read this operation manual carefully and use the product correctly.
More informationMounting and Operating Instructions EB 8546 EN. Type 4708 Supply Pressure Regulators. Translation of original instructions. Type Type
Type 4708 Supply Pressure Regulators Translation of original instructions Type 4708-53 Type 4708-64 Type 4708-12 Mounting and Operating Instructions Edition March 2018 Note on these mounting and operating
More informationCompressed Air Cleaning Filter Series
Compressed ir Cleaning Filter Series M /FF Series For Water Droplet, Solid/Oil Separation and Deodorization Modular connection, Space-saving design, Labor-saving in piping! Uses the same spacer as the
More informationHow to Order. Body size. Pressure: 2 MPa. Pressure increase ratio 0 Twice. Symbol. Thread type. Body size
Booster Regulator Series VBA How to Order VBA 0 series VBA 0 0 Body size /4 Pressure: MPa Pressure increase ratio 0 Twice Thread type Symbol F Thread type G Port size Symbol Port size 0 /4 Symbol VBA0-0
More informationPrecision Pressure Regulators
hapter - Pressure Regulators Pressure range onnection thread Device Page 3 mm, high precision 0.0 2 / 8 bar G 1 8 RI.02 highly sensitive, max. 3 bar supply pressure 0.002 0.12 / 31 bar ¼"NPT R40.03 without
More informationProcess Pump Automatically Operated Type (Internal Switching Type) Air Operated Type (External Switching Type) How to Order
Process Pump /5 Series Automatically Operated Type (Internal Switching Type)/Air Operated Type (External Switching Type) High abrasion resistance and low particle generation o sliding parts in wetted areas.
More informationPRS(TC)4,8 USER MANUAL. Read the complete manual before installing and using the regulator.
PRS(TC)4,8 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to
More informationAuto Feed Lube, Auto Feed Tank ALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Fluid Proof pressure Operating pressure differential range (Difference between tank pressure and line pressure) Vibration resistance
More informationLRS(H)4 USER MANUAL. Read the complete manual before installing and using the regulator.
LRS(H)4 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to the
More informationPressure booster combination DPA-CRVZS. Operating instructions a [ ]
Pressure booster combination en Operating instructions 8074546 2017-07a [8074548] Original instructions -EN Identification of hazards and instructions on how to prevent them: Danger Immediate dangers which
More informationTech Tips. Service Call: Adjustable Hydraulic Valves Flow controls Pressure controls Sequence valves Holding valves
Service Call: Adjustable Hydraulic Valves Flow controls Pressure controls Sequence valves Holding valves Tools Required: Flow Meter Pressure gauge Holding valve test block Wrenches for installation of
More informationB2KL: 6-way ball valve with male thread, PN 16
Product data sheet 3.1 58.001 K: 6-way ball valve with male thread, PN 16 How energy efficiency is improved fficiency means precise control and low actuating forces eatures 6-way ball valve for changeover
More informationType Pressure Regulator. for increased air capacity. Fig. 1: Type Pressure Regulator. Mounting and Operating Instructions EB EN
Type 4708-45 Pressure Regulator for increased air capacity Fig. 1: Type 4708-45 Pressure Regulator Mounting and Operating Instructions EB 8546-1 EN Edition March 2010 Definition of the signal words used
More informationOPERATION MANUAL Please read this Operation Manual carefully before use, and file for future reference.
English Lubrication Free Air Turbine Handpiece with Water Spray OPERATION MANUAL Please read this Operation Manual carefully before use, and file for future reference. OM-T0286E 001 Thank you for purchasing
More informationLMU100/200 Series. Standard Specifications
Mist Spray Unit MU/ Series Intermittent spray to cutting and press gear chains, etc. Standard Specifications Inlet air Oil tank set range Oil Dynamic viscosity of oil ( C) Oil tank capacity (cm ) mbient
More informationDoc. No. AC -OMQ0008-B PRODUCT NAME AIR COMBINATION. MODEL/ Series AC10(A,B)- -A AC20(A,B,C,D)- -A AC25(B,C)- -A AC30(A,B,C,D)- -A AC40(A,B,C,D)- -A
Doc. No. AC OMQ0008B PRODUCT NAME AIR COMBINATION MODEL/ Series AC10(A,B) A AC20(A,B,C,D) A AC25(B,C) A AC30(A,B,C,D) A AC40(A,B,C,D) A Contents PAGE 1. PRECAUTION FOR SAFETY 1~8 2. APPLICATION 9 3. SPECIFICATIONS...
More informationB84G - Excelon Plus Modular System General purpose filter/regulator
> Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Push to lock adjusting knob with built in tamper resistant
More informationIP2, IP2A and IP2D. Spirax-Monnier International Compressed Air Filter/ Regulators
Page 1 of 6 TI-P510-01 H Issue 5 IP2, IP2 and IP2D ISO 9001 Spirax-Monnier International ompressed ir Filter/ Regulators ert. No. LRQ 0963008 Description The IP range of Spirax-Monnier international compressed
More informationAir preparation units
Overview Description Page Characteristics Dimensions Order instructions Type overview unit three-piece 44, 45, 48 52 6 unit two piece 44, 45, 48 52 6 Filter-regulator 44, 45, 48 53 6 Filter-water-separator
More informationRS(H)10,15 USER MANUAL. Read the complete manual before installing and using the regulator.
RS(H)10,15 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to
More informationSeriesTRBU. Flame Resistant (Equivalent to UL-94 Standard V-0) FR Double Layer Polyurethane Tubing
CAT.E521- A Flame Resistant (Equivalent to UL-94 Standard V-0) FR Double Layer Polyurethane Tubing SeriesTRBU For general air and water piping in environments with sparks from spot welding, etc. Double
More informationAir Saving Valve. Pressure Valve Flow Valve
Air Saving Valve Series Series Pressure Valve Flow Valve % reduction in air consumption Cuts air consumption by operating the return stroke at a reduced pressure. valve Pressure Air consumption reduction
More informationModel 40H Nullmatic Pressure Regulators
Siemens Industry, Inc. INSTALLATION AND SERVICE INSTRUCTION SD40H Rev 10 June 2012 Supersedes Rev 9 Model 40H Nullmatic Pressure Regulators INTRODUCTION The Model 40 Nullmatic Pressure Regulator, shown
More informationDescription Pressure range Connection thread Device Page
Pressure Regulator Pressure range onnection thread Device Page max. 22 l/min miniature -850 0 mbar 1 8 NPT V800.02 max. 22 l/min miniature -850 0 mbar 10-32 and flange V900.02 max. 0 l/min precise -1 +0,.4
More informationMounting and Operating Instructions EB 8546 EN. Supply Pressure Regulator Type Fig. 1 Supply pressure regulators
Supply Pressure Regulator Type 4708 Type 4708-5352 on Type 3730 Positioner Type 4708-52 with filter receptacle Type 4708-6252 on Type 3372 ctuator Fig. Supply pressure regulators Mounting and Operating
More informationStandard Operating and Maintenance Instructions for Pumping System Model PS-90
Standard Operating and Maintenance Instructions for Pumping System Model PS-90 High Pressure Equipment Company 2955 West 17th Street, Suite 6 PO Box 8248 Erie, PA 16505 USA 814-838-2028 (phone) 814-838-6075
More informationThe products listed in this page are ECO-friendly products. * Please refer to page 4 for the details of ECO-friendly products. Model UAMR AD- L
his modular type unit offers a rich variety of combinations and features easy maintenance. Air Filter (1) (2) (3) (4) Regulator Mist Filter or Micromist Filter (5) (6) (1) ype (2) Unit combination Code
More informationINDUSTRIAL VALVES MODELS: C62-A; C62-D. INSTRUCTION MANUAL Installation Operation Parts Service DIAPHRAGM BYPASS PRESSURE REGULATING VALVES
INSTRUCTION MANUAL Installation Operation Parts Service IMPORTANT Record your Regulator model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts
More informationTECHNICAL DATA. Q = C v P S
Page 1 of 13 1. DESCRIPTION The Viking 6 Model G-6000 Dry Valve Riser Assembly consists of a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry sprinkler
More informationInstallation, Operation, and Maintenance Manual
Installation, Operation, and Maintenance Manual Welker Instrument Supply Pressure System Model WIC The information in this manual has been carefully checked for accuracy and is intended to be used as a
More informationSpecifications. Construction. 2 port valve/series VHK2 3 port valve/series VHK3. Component Parts. Standard style. Standard style
Finger Valve eriesvhk Large effective area: to mm 2 mall knob operating force: 0.43 to 1.4 kgfcm Poppet valve construction with few seal defects The series begins with the min. tube O.D. of. election from
More informationIX1 Spirax-Monnier International Compressed Air Filter Installation and Maintenance Instructions
0575050/2 IM-P057-04 CH Issue 2 IX1 Spirax-Monnier International Compressed Air Filter Installation and Maintenance Instructions 1 Safety information 2 General product information 3 Installation and commissioning
More informationLow torque Metal seal type Rotary joint
CAT.E0- A Low torque Metal seal type Rotary joint Long Life 0. to billion rotations Under SMC s life test conditions. Flexible Coupling Fixed (Body) Low rotational torque 0.00 to 0.0 N.m or less Rotary
More informationApollo Standard Port, Full Port & One Piece Flanged Ball Valves Installation, Operation, & Maintenance Manual
I854000.D Apollo Standard Port, Full Port & One Piece Flanged Ball Valves Installation, Operation, & Maintenance Manual Introduction This manual presents guidelines for the Installation, Operation and
More informationINSTRUCTION MANUAL. CVS P37 LP Gas Reducing Regulator
INSTRUCTION MANUAL CVS P37 LP Gas Reducing Regulator The CVS Controls P37 Regulator is a non-relieving, pressure reducing regulator suitable for use in LP gas applications (Natural Gas and Propane). As
More informationSUPER PRECISION AIR RELAYS
CAT. No. KS-128E SUPER PRECISION AIR REGULATOR rsseries SUPER PRECISION AIR REGULATORS rr SERIES SUPER PRECISION AIR RELAYS Air Pressure Regulators that attain the ultimate in pressure control. S/R R SUPER
More informationBooster Regulator/Air Tank
Booster Regulator/ir Tank Series /T Increase factory air pressure by up to 4 times! ir-only operation requires no power supply, reduces heat generation, and Boost pressure allows easy installation. Renewed
More informationTESCOM 50-4X Series Safety, Installation & Start-Up Procedures
Operations & Service Manual TESCOM 50-4X Series Safety, Installation & Start-Up Procedures Do not attempt to select, install, use or maintain this product until you have read and fully understood this
More information