SAFETY DATA SHEET Stainless Steel, Powder Coated Galv and Aluminium Beads, Trims and Flashings.

Transcription

1 Page: 1 Compilation Date: 30/11/2016 Revision No: 1 Authorised by: M. Gee Section 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product Identifier Product: Product Code: Various 1.2. Relevant identified uses of the substance or Mixture and uses advised against 1.3. Details of the supplier of the safety data sheet Company Name: SPS Envirowall Ltd Orchard House Aire Valley Business Centre Keighley West Yorkshire BD21 3DU United Kingdom Tel: Fax: info@spsenvirowall.co.uk 1.4. Emergency Telephone Number National Poisons Emergency Number / NHS : 111 Section 2: Hazards identification 2.1. Classification of the substance or mixture There is no chemical hazard with this product. Our powder coating product is TGIC free. There may be possible dermatitis risks from the oils used whilst rolling product, but this risk is minimal as the product is drained before despatch. Stainless steel is very sharp and will cause severe cuts gloves must be worn. Care should be taken in product handling to avoid any contact with face/eyes due to risk of cuts, etc. 2.2 Label Elements 2.3. Other Hazards Section 3: Composition/information on ingredients 3.2. Mixtures Products are composed of either stainless steel or powder coated aluminium/galvanised steel rolled or bent to shape. SPSELtd/Sales/2107 Page 1 of 5 VERSION 1 DEC16

2 Page: 2 Section 4: First aid measures 4.1. Description of first aid measures GENERAL: In all cases of doubt or when symptoms persist seek medical attention. EYE CONTACT: Dangerous in the event of physical contact with the eye. SKIN CONTACT: Main hazard is cuts from sharp edges. Wear gloves. INGESTION: Avoid ingestion of metals. If accidentally swallowed, obtain immediate medical attention. Keep at rest. Do not induce vomiting Most important symptoms and effect, both acute and delayed 4.3. Indication of any immediate medical attention and special treatment needed Section 5: Fire-fighting measures 5.1. Extinguishing media Extinguishing media: Alcohol resistant foam, powder or low pressure CO2 water/spray. NOT TO BE USED: High pressure inert gas (eg CO2), water jets Special hazards arising from the substance or mixture Fire will produce dense black smoke containing hazardous products of combustion which may be a hazard to health Advice for fire-fighters Appropriate self-contained breathing apparatus may be required. Cool areas exposed to fire with water hoses or sprays. Section 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Not applicable 6.2. Environmental precautions Not applicable 6.3. Methods and material for containment and cleaning up No information available 6.4. Reference to other sections Section 7: Handling and storage 7.1. Precautions for safe handling Manual Handling Regulations 1992 may apply to the handling of this product. Refer to guide weights Conditions for safe storage, including any incompatibilities No special precautions required SPSELtd/Sales/2107 Page 2 of 5 VERSION 1 DEC16

3 Page: 4 Page: Specific end use(s) Specific end use(s):. Section 8: Exposure controls/personal protection 8.1. Control parameters 8.2. Exposure controls Gloves should be worn to avoid cuts. No other personal protection measures necessary. Self-contained breathing apparatus will be necessary when normal ventilation is not sufficient in the event of a fire. Section 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Other information Other information:. Section 10: Stability and reactivity Reactivity Chemical stability Possibility of hazardous reactions Conditions to avoid Incompatible materials Hazardous decomposition products Section 11: Toxicological information Information on toxicological effects Section 12: Ecological information Toxicity Not classified as dangerous for the environment SPSELtd/Sales/2107 Page 3 of 5 VERSION 1 DEC16

4 12.2. Persistence and degradability Bio accumulative potential No evidence Mobility in soil Results of PBT and vpvb assessment Other adverse effects Not known Section 13: Disposal considerations Waste treatment methods. Section 14: Transport information UN number UN number: n/a UN proper shipping name Transport hazard class(es) Packing group Environmental hazards Environmentally hazardous: Not known Marine pollutant: Not known Special precautions for user Special precautions: No special precautions. SPSELtd/Sales/2107 Page 4 of 5 VERSION 1 DEC16

5 Section 15: Regulatory information Safety, health and environmental regulations/legislation specific for the substance or mixture No information available Chemical Safety Assessment Section 16: Other information This product is not classified as dangerous for carriage under UK or International Regulations. Legal disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any damage resulting from handling or from contact with the above product. SPSELtd/Sales/2107 Page 5 of 5 VERSION 1 DEC16