1.4. Emergency telephone number : US Emergency Telephone No (STERIS); (CHEMTREC)

Transcription

1 Date of issue: 01/15/2015 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Trade name : Chevron Hydraulic Oil AW ISO 32 Product code : P Relevant identified uses of the substance or mixture and uses advised against Use of the substance/mixture Use of the substance/mixture : Hydraulic Oil 1.3. Details of the supplier of the safety data sheet : For industrial and institutional use only. Not for home use. STERIS Corporation P. O. Box 147, St. Louis, MO 63166, US Telephone Number for Information: (Customer Service-Healthcare Products) 1.4. Emergency telephone number Emergency number : US Emergency Telephone No (STERIS); (CHEMTREC) SECTION 2: Hazards identification 2.1. Classification of the substance or mixture GHS-US classification Not classified 2.2. Label elements GHS-US labelling No labelling applicable 2.3. Other hazards 2.4. Unknown acute toxicity (GHS-US) No data available SECTION 3: Composition/information on ingredients 3.1. Substance Not applicable Full text of H-phrases: see section Mixture Name Product identifier % Classification (GHS-US) Highly refined mineral oil (C15-C50) Mixture Not classified SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures general First-aid measures after inhalation First-aid measures after skin contact First-aid measures after eye contact First-aid measures after ingestion : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label where possible). : No specific first aid measures are required. If exposed to excessive levels of material in the air, move the exposed person to fresh air. Get medical attention if coughing or respiratory discomfort occurs. : No specific first aid measures are required. As a precaution, remove clothing and shoes if contaminated. To remove the material from skin, use soap and water. Discard contaminated clothing and shoes or thoroughly clean before reuse. : No specific first aid measures are required. As a precaution, remove contact lenses, if worn, and flush eyes with water. : No specific first aid measures are required. Do not induce vomiting. As a precaution, get medical advice. 01/15/2015 EN (English) SDS ID: P636US Page 1

2 Note to Physicians : In an accident involving high-pressure equipment, this product may be injected under the skin. Such an accident may result in a small, sometimes bloodless puncture wound. However, because of its driving force, material injected into a fingertip can be deposited into the palm of the hand. Within 24 hours there is usually a great deal of swelling, discoloration, and intense throbbing pain. Immediate treatment at a surgical emergency center is recommended Most important symptoms and effects, both acute and delayed Symptoms/injuries after inhalation Symptoms/injuries after skin contact Symptoms/injuries after eye contact Symptoms/injuries after ingestion : Not expected to be harmful if inhaled. Contains a petroleum-based mineral oil. May cause respiratory irritation or other pulmonary effects following prolonged or repeated inhalation of oil mist at airborne levels above the recommended mineral oil mist exposure limit. Symptoms of respiratory irritation may include coughing and difficulty breathing. : Contact with skin is not expected to cause prolonged or significant irritation. Contact with the skin is not expected to cause an allergic skin response. Not expected to be harmful to internal organs if absorbed through skin. High-Pressure Equipment Information: Accidental high-velocity injection under the skin of materials of this type may result in serious injury. Seek medical attention at once should an accident like this occur. The initial wound at the injection site may not appear to be serious at first; but, if left untreated, could result in disfigurement or amputation of the affected part. : Not expected to cause prolonged or significant eye damage. : Not expected to be harmful if swallowed Indication of any immediate medical attention and special treatment needed SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media 5.2. Special hazards arising from the substance or mixture Hazardous decomposition products in case of fire : Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames. : Highly dependent on combustion conditions. A complex mixture of airborne solids, liquids and gases including carbon monoxide, carbon dioxide, and unidentified organic carbon compounds will be evolved when this material undergoes combustion Advice for firefighters Firefighting instructions Protective equipment for firefighters : This material will burn although it is not easily ignited. : Do not enter fire area without proper protective equipment, including respiratory protection. Wear a self contained breathing apparatus. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures General measures For non-emergency personnel : Do not breathe fumes, vapours. Avoid contact with skin, eyes and clothes. If spilled, may cause the floor to be slippery. Remove all sources of ignition in vicinity of spilled material. Protective equipment : Use personal protective equipment as required. For further information refer to section 8: "Exposure controls/personal protection". Emergency procedures : Stop leak if safe to do so. Evacuate unnecessary personnel For emergency responders Protective equipment : Equip cleanup crew with proper protection Environmental precautions Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters. Report spills to local authorities and/or the U.S. Coast Guard s National Response Center at (800) as appropriate or required Methods and material for containment and cleaning up Methods for cleaning up 6.4. Reference to other sections See Heading 8. Exposure controls and personal protection. : Stop the source of the release if you can do it without risk. Contain release to prevent further contamination of soil, surface water or groundwater. Clean up spill as soon as possible., observing precautions in Exposure Controls/Personal Protection. Use appropriate techniques such as applying non-combustible absorbent materials or pumping. Where feasible and appropriate, remove contaminated soil. Place contaminated materials in disposable containers and dispose of in a manner consistent with applicable regulations. 01/15/2015 EN (English) SDS ID: P636US 2/6

3 SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling Hygiene measures : DO NOT USE IN HIGH PRESSURE SYSTEMS in the vicinity of flames, sparks and hot surfaces. Use only in well-ventilated areas. Keep container closed. Avoid contaminating soil or releasing this material into sewage and drainage systems and bodies of water. : Take care for general good hygiene and housekeeping. Do not eat, drink or smoke when using this product Conditions for safe storage, including any incompatibilities Technical measures Storage conditions Incompatible materials 7.3. Specific end use(s) SECTION 8: Exposure controls/personal protection 8.1. Control parameters : Provide adequate ventilation. A washing facility/water for eye and skin cleaning purposes should be present. : Keep only in the original container in a cool, well ventilated place. Keep container closed when not in use. : May react with strong acids or strong oxidizing agents such as chlorates, nitrates and peroxides, etc Exposure controls Appropriate engineering controls Personal protective equipment : Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. Use ventilation to keep exposure to airborne contaminants below the exposure limits. : Avoid all unnecessary exposure. Personal protective equipment should be selected based upon the conditions under which this product is handled or used. Gloves. Protective goggles. Hand protection Eye protection Skin and body protection Respiratory protection : Suggested materials for protective gloves include: 4H (PE/EVAL), Nitrile Rubber, Silver Shield, Viton. : No special eye protection is normally required. Where splashing is possible, wear safety glasses with side shields as a good safety practice. : No special protective clothing is normally required. Where splashing is possible, select protective clothing depending onoperations conducted, physical requirements and other substances in the workplace. : The need for respiratory protection is not anticipated under normal use conditions and with adequate ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state : Liquid Appearance : Yellow Liquid Colour : Yellow Odour : Petroleum odor Odour threshold ph Relative evaporation rate (butyl acetate=1) Melting point Freezing point Boiling point : >315 o C (599 o F) Flash point Auto-ignition temperature Decomposition temperature Flammability (solid, gas) 01/15/2015 EN (English) SDS ID: P636US 3/6

4 Vapour pressure : <0.01 mm 37.8 o C (100 o F) Relative vapour density at 20 C : >1 Relative density Density Solubility Log Pow Log Kow Viscosity, kinematic Viscosity, dynamic Explosive properties Oxidising properties Explosive limits 9.2. Other information SECTION 10: Stability and reactivity Reactivity Chemical stability : o C (59 o F) (Typical) : Hydrocarbon Solvents: Soluble; Water: Insoluble : 28.8 mm 2 40 o C (104 o F) Minimum Stable under normal ambient and anticipated storage and handling conditions of temperature and pressure Possibility of hazardous reactions Hazardous polymerization will not occur Conditions to avoid Heat. Ignition sources Incompatible materials May react wtih strong acids or strong oxidizing agents, such as chlorates, nitrates, peroxides, etc Hazardous decomposition products None known or expected. SECTION 11: Toxicological information Information on toxicological effects Skin corrosion/irritation Serious eye damage/irritation Respiratory or skin sensitisation Germ cell mutagenicity Carcinogenicity Reproductive toxicity Specific target organ toxicity (single exposure) Specific target organ toxicity (repeated exposure) Aspiration hazard Symptoms/injuries after inhalation 01/15/2015 EN (English) SDS ID: P636US 4/6

5 Symptoms/injuries after skin contact Symptoms/injuries after eye contact Symptoms/injuries after ingestion SECTION 12: Ecological information Toxicity This material is not expected to be harmful to aquatic organisms. The ecotoxicity hazard is based on an evaluation of data for the components or a similar material Persistence and degradability Bioaccumulative potential Mobility in soil Other adverse effects Other information SECTION 13: Disposal considerations Waste treatment methods Waste disposal recommendations Ecology - waste materials : Avoid release to the environment. : Use material for its intended purpose or recycle if possible. Oil collection services are available for used oil recycling or disposal. Place contaminated materials in containers and dispose of in a manner consistent with applicable regulations. Contact your sales representative or local environmental or health authorities for approved disposal or recycling methods. : Avoid release to the environment. SECTION 14: Transport information In accordance with DOT Not regulated for transport Additional information Other information ADR Transport document description : No supplementary information available. : Transport by sea Air transport SECTION 15: Regulatory information US Federal regulations International regulations All components comply with the following chemical inventory requirements : AICS (Australia), DSL (Canada), EINECS (European Union), ENCS (Japan), IECSC (China), KECl (Korea), PICCS (Phillippines), TSCA (United States) US State regulations New Jersey RTK Classification : Under the New Jersey Right-to-Know Act L Chapter 315 N.J.S.A. 34 :5A-1 et. Seq., the product is to be identified as follows : PETROLEUM OIL (Hydraulic Oil) 01/15/2015 EN (English) SDS ID: P636US 5/6

6 SECTION 16: Other information NFPA health hazard NFPA fire hazard NFPA reactivity : 0 Poses no health hazard, no precautions necessary and would offer no hazard beyond that of ordinary combustible materials. : 1 Materials that require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur. Includes some finely divided suspended solids that do not require heating before ignition can occur. Flash point at or above 93 o C (200 o F) : 0 - Normally stable, even under fire exposure conditions, and are not reactive with water SDS US (GHS HazCom 2012) The information on this sheet is not a specification and does not guarantee specific properties. The information is intended to provide general knowledge as to health and safety based upon our knowledge of the handling, storage and use of the product. It is not applicable to unusual or non-standard uses of the product or where instruction or recommendations are not followed. 01/15/2015 EN (English) SDS ID: P636US 6/6