Valves series A1 1/2, 3/2, electrically operated
|
|
|
- Sheryl Page
- 5 years ago
- Views:
Transcription
1 1/, 3/, electrically operated Executions 3/ NC 0113 A1E430 3/ NO 3 0 A1E / 03 A1E43 3/ NC 3/, 0137 A1K A1K43 Series of spool valves, with static seals, high flow, for panel mounting. Coils and connectors are to be ordered separately. For the coils type ASA.../ASA... see page.00.1 For the connectors type A... see page..0 On request, they can be supplied according Directive 94/9/EC - ATEX II GDc T5 Code key Series Actuation Size Function A1 E = electrical K = electrical with external 1 = 1/8 = 1/4 4 = 1/ 30 = 3/ NC 31 = 3/ NO 3 = 3/ 50 = 5/ solenoid/spring 51 = 5/ = CC 71 = CO 7 = CP Technical data Fluid Pressure range Temperature range Orifice Flow Compressed filtered air with or without lubrication. Lubrication, if be used, must be continous. 0 bar - C +60 C mm 900 Nl/min at 6 bar with ΔP 1 bar Minimum piloting pressure Monostable:.5 bar Bistable: 1 bar 3 positions:.5 bar Mounting Manual override In any position Bistable on solenoid pilot - Monostable on valve body Materials Body: Aluminium Heads: Aluminium Spool: Aluminium Distancers: Aluminium Seals: NBR.90.1
2 1/, 3/, electrically operated G1/ 3/ NC 0113 A1E / NA A1E / NC 0137 A1K ,5 38, M5 3 NC NO 0,5 G1/ 3/ 03 A1E43 5 3/, A1K ,5 38, M5 3 0,5.90.
3 1/, 5/ -, electrically operated Executions 5/ solenoid/spring 4 01 A1E450 5/ 4 01 A1E451 5/ A1E45 with closed 4 04 A1E4 with open with pressurised A1E A1E47 Series of spool valves, with static seals, high flow, for panel mounting. Coils and connectors are to be ordered separately. For the coils type ASA.../ASA... see page.00.1 For the connectors type A... see page..0 5/ solenoid/spring 5/ with closed, external with open, external A1K A1K A1K A1K471 Code key Series Actuation Size Function A1 E = electrical K = elettrical with external 1 = 1/8 = 1/4 4 = 1/ 30 = 3/ NC 31 = 3/ NO 3 = 3/ 50 = 5/ solenoid/spring 51 = 5/ 5 = 5/ = CC 71 = CO 7 = CP with presurised, external A1K47 On request, they can be supplied according Directive 94/9/EC - ATEX II GDc T5 Technical data Fluid Pressure range Temperature range Orifice Flow Compressed filtered air with or without lubrication. Lubrication, if be used, must be continous. 0 bar - C +60 C mm 900 Nl/min at 6 bar with ΔP 1 bar Minimum piloting pressure Monostable:.5 bar Bistable: 1 bar 3 positions:.5 bar Mounting Pilot Manual override In any position Pilot in line Bistable on solenoid pilot - Monostable on valve body Materials Body: Aluminium Heads: Aluminium Spool: Aluminium Distancers: Aluminium Seals: NBR.93.1
4 1/, 5/ -, electrically operated G1/ 5/ solenoid/spring 4 01 A1E / solenoid/spring A1K ,5 38, M , M ,5 38,5 G1/ Versione Simbolo Codice Articolo 5/ 5/ with closed with open with pressurised 5/ closed open with pressurised, A1E A1E45 04 A1E4 05 A1E A1E47 03 A1K A1K A1K A1K47.93.
5 1/, 3/, pneumatically operated Esecuzioni 3/ NC 0116 A1P430 3/ NO 3 07 A1P / 08 A1P43 On request, they can be supplied according Directive 94/9/EC - ATEX II GDc T5 Series of spool valves, with static seals, high flow, for panel mounting. Code key Series Actuation Size Function A1 P = pneumatic 1 = 1/8 = 1/4 4 = 1/ 30 = 3/ NC 31 = 3/ NO 3 = 3/ 33 = 3/ 50 = 5/ pilot/spring 51 = 5/ 5 = 5/ = CC 71 = CO 7 = CP Technical data Fluid Pressure range Temperature range Orifice Flow Compressed filtered air with or without lubrication. Lubrication, if be used, must be continous. 0 bar - C +60 C mm 900 Nl/min at 6 bar with ΔP 1 bar Minimum piloting pressure Monostable:.5 bar Bistable: 1 bar 3 positions:.5 bar Mounting Manual override In any position Bistable on solenoid pilot - Monostable on valve body Materials Body: Aluminium Heads: Aluminium Spool: Aluminium Distancers: Aluminium Seals: NBR.96.1
6 1/, 3/, pneumatically operated G1/ 3/ NC 0116 A1P / NO A1P ,5 38, ,5 NC NO 3 G1/ 3/ 08 A1P ,5 38, ,5,
7 1/, 5/ -, pneumatically operated Executions 5/ pilot/spring A1P450 5/ A1P451 5/ A1P45 with closed with open with pressurised A1P A1P A1P47 On request, they can be supplied according Directive 94/9/EC - ATEX II GDc T5 Series of spool valves, with static seals, high flow, for panel mounting. Code key Series Actuation Size Function A1 P = pneumatic 1 = 1/8 = 1/4 4 = 1/ 30 = 3/ NC 31 = 3/ NO 3 = 3/ 33 = 3/ 50 = 5/ pilot/spring 51 = 5/ 5 = 5/ = CC 71 = CO 7 = CP Technical data Fluid Pressure range Temperature range Orifice Flow Compressed filtered air with or without lubrication. Lubrication, if be used, must be continous. 0 bar - C +60 C mm 900 Nl/min at 6 bar with ΔP 1 bar Minimum piloting pressure Monostable:.5 bar Bistable: 1 bar 3 positions:.5 bar Mounting Manual override In any position Bistable on solenoid pilot - Monostable on valve body Materials Body: Aluminium Heads: Aluminium Spool: Aluminium Distancers: Aluminium Seals: NBR.99.1
8 1/, 5/ -, pneumatically operated G1/ 5 5/ pilot/spring A1P ,5 38, , G1/ 5 5/ A1P / closed A1P45 09 A1P4 18,5 38,5 open with pressurised A1P A1P , ,
Valves ISO 5599/1 ISO 1, 5/2-5/3, electrically operated, with CNOMO pilot
ISO 1, - 5/3, electrically operated, with CNOMO pilot Executions 0300 ISO1E50 NOTE: FOR VALVES WITH PILOT IN LINE SEE PAGE.111.1 Technical data 03030 ISO1E51 03037 ISO1E5 03031 ISO1E70 0303 ISO1E71 03043
filtered air without lubricant. If lubricated air is used, it is recommended to use ISOVG32 oil and to never interrupt lubrication.
> Series EN valves and solenoid valves Valves and Solenoid valves Series EN, CC - CO - CP With outlets on the body - For individual or manifold assembly Size 16-19 mm» Mounting on any flat surface» Reduced
SOLENOID VALVES AND PNEUMATIC VALVES
S E R I E S 3 4 2 Electropneumatically operated valves Series 3 and 4 Series 3: G1/8, 3/2 - way and 5/2 - way Series 4: G1/8, G1/4 and G1/2 3/2, 5/2 and 5/3 - way GENERAL DATA Construction Valve group
series UDS ISO to ISO 5599/1 standard pilot and solenoid actuated sizes DESCRIPTION TECHNICAL DATA MATERIALS SPARE PARTS
series UDS ISO Valves to ISO 5599/1 standard pilot and solenoid actuated sizes 1 - - 3 DESCRIPTION Valves series UDS ISO are produced in the and functions according to the interface to ISO 5599/1 standard
VALVES ISO 5599/1, SERIES IPV-ISV
VALVES ISO 99/1, SERIES IPV-ISV The assembly surface dimensions of ISO1 and ISO2 valves are to ISO99-1. They are available in the -way versions with 2 and 3 positions and with pneumatic or solenoid actuation.
Vannes à levier de commande Manually actuated valves
Vannes à levier de commande Distributeurs /-/-/ à raccordement G/8 -G/ -G/8 -G/ /-/-/ spool valves with G/8 -G/ -G/8 -G/ threaded ports Installation dans toutes les positions Installation in any position
seriesek Spool valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 DESCRIPTION Spool valves series EK 2.43 MATERIALS TECHNICAL DATA SPARE PARTS
Spool valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/ DESCRIPTION Valves series "EK" are produced in the 3/, 5/ and pneumatic functions. The piloting solenoid valve can be assembled perpendicular
SOLENOID VALVES AND PNEUMATIC VALVES
9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, 2 and 3 The Series 9 electropneumatically or pneumatically operated
Valves to ISO 5599/1 standards pilot and solenoid actuated size
Series UDS ISO pilot and solenoid actuated size 1 - - 3 DESCRIPTION Valves series "UDS ISO" are produced in the and pneumatic functions according to the interface to ISO 5599/1 standards and they are mounted
seriesuds ISO Valves to ISO 5599/1 standard
seriesuds ISO Valves to ISO 5599/1 standard pilot and solenoid actuated sizes 1 - - 3 DESCRIPTION Valves series UDS ISO are produced in the and pneumatic functions according to the interface to ISO 5599/1
Spool compact valves pilot and solenoid actuated G 1/8 - G 1/4
Spool compact valves pilot and solenoid actuated G 1/8 - G 1/4 DESCRIPTION Valves series "MEK", in the 5/ and pneumatic functions, have been realized with compact overall dimensions yet assuring high flow.
Series 4 Cv= Air-Pilot operated valves. 3-way/2-position, 5-way/2-position, 5-way/3-position
3 Cv =.73-2.00 Series 4 Cv=.73-2.00 Air-Pilot operated valves Series 4: 1/8,, 3-way/2-position; 5-way/2-position; 5-way/3-position 1/2 5-way/2-position The pneumatically operated,3-way/2-position, 5-way/2-position
Series 1, 3 and 4 Cv = /8" and 1/4" Ported Manually Operated Valves. 3-way/2-position, 5-way/2-position, 5-way/3position
Cv =.52 -.73 Series, 3 and 4 Cv =.52.3 /8" and /4" Ported Manually Operated Valves 3-way/2-position, 5-way/2-position and 5-way/3-position Ports /8 and /4" NPTF The Series (/8 & /4", 3-way/2-position and
Distributeurs commande manuelle à levier
Distributeurs commande manuelle à levier Lever actuated valves Informations générales General information Distributeurs 3/2-5/2-5/3 à raccordements - G1/4 - G3/8 - G1/2 - G3/4 3/2-5/2-5/3 spool valves
Pneumatic valve islands
Pneumatic valve islands The MEGA solenoid air operated spool valve JOUCOMATIC offers a concept of solenoid air operated spool valves which can be fitted together to form islands. Due to its new patented
SPCH/ Blowing block
> > for linear stretch blow moulding machines > > Compact and safe design > > Best suited for PET bottles up to litres, depending on cycle time Technical features Medium: Compressed air (purity class 3..3
MATERIALS SPARE PARTS. iting pressure (b. Spool compact valves series MEK
Spool compact valves pilot and solenoid actuated G 1/8 - G 1/4 Valves series "MEK", in trie and pneumatic functions, have been realized with compact overall dimensions yet assuring high flow. The kind
TECHNICAL CHARACTERSTICS
and solenoid valves spool version GM - GL series Type of valves with dorsal consumption: GM-...series with integrated connections GL-...series without connections TECHNICAL CHARACTERSTICS Ambient temperature:
Pneumatic spool valve islands
Pneumatic spool valve islands P7.GB.R MEGA SPOOL VALVE ISLANDS MEGA pneumatic spool valve islands offer maximum performance along with flexibility, easy installation and simple operation. Due to their
Valves, manually operated
Valves, manually operated Valves, manually operated Key features VHEM-P K/O-3-PK-3 H-3-¼-B KH/O-3-PK3 TH/O-3-PK3 F-3-¼-B Innovative Versatile Reliable Easy to mount Small and compact for a wide range of
Valves, manually operated
Valves, manually operated Valves, manually operated Key features VHEM-P K/O-3-PK-3 H-3-¼-B KH/O-3-PK3 TH/O-3-PK3 VHEM-L F-3-¼-B Innovative Versatile Reliable Easy to mount Small and compact for a wide
Hand slide valves W/VBOH
Hand slide valves W/VBOH Hand slide valves W/VBOH Product range overview Version Valve function Version Type Pneumatic connection 1 Pneumatic connection 2 qnn Page/ Internet [l/min] Hand slide valves 3/2-way,
Nugget 120 V14 Series
Nugget 0 V Series /2 & /3 Valves Solenoid and Pilot Operated G 1 4 High flow compact valves Sub-base and low profile manifolds Light weight, long life corrosion resistant materials Multipole and Fieldbus
MULTIPOL - VDMA. PNEUMATIC SPOOL VALVE ISLANDS VDMA ISO 02 - ISO 01 (G1/8 - G1/4) designed for connection to a PLC by multiwire cable
P8.G.R PEUATIC SPOOL VALVE ISLADS VDA - ISO - ISO (G/8 - G/) designed for connection to a PLC by multiwire cable ULTIPOL - VDA IPUT IPUT OUTPUT OUTPUT OUTPUT IPUT IPUT ULTIPOL - VDA Pneumatic spool valve
4/2 way Pneumatic Solenoid Valve
4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11
Nugget 120 V14 Series
Nugget 0 V Series /2 & /3 Valves Solenoid and Pilot Operated G 1 4 High flow compact valves Sub-base and low profile manifolds Light weight, long life corrosion resistant materials Multipole and Fieldbus
SPOOL VALVES. ISO 15407/1 - Sizes Series PA568-GB-R3. All leafl ets available at:
SPOOL VLVS ISO 07/ - Sizes 0-0 Series 8-9 P68-GB-R ll leafl ets available at: www.ascojoucomatic.com FTURS These spool valves which comply with the VDM 6 standard offer the advantage of being smaller than
Heavy Metal Stainless Steel Valves
2.10 page 187 2.10 Heavy Metal Stainless Steel Valves Selected models are available for explosion hazardous environment. They are ATEX-Ex certified. For detailed information refer to chapter 2.12. 316
3/2-way valve, Series CD07 Qn= 1400 l/min pipe connection compressed air connection output: G 1/4 - M14x1,5 suitable for ATEX
/-way valve, Series CD07 Version Spool valve, zero overlap Sealing principle soft sealing Working pressure min./max. -0.95 bar / 0 bar Ambient temperature min./max. -5 C / +80 C Medium temperature min./max.
1 LS unloading (control valve, orifice, none) 2 LS max pressure relief. 3 Spool type
Flow Control Valve Series LVM.. high flow rates (8 l/min) flow rates are unaffected by temperature change or when the higher load pressure alternates between the outlet ports proportional flow-sharing
Coding of banjo flow controllers. Actuation M = Manual S = Screwdriver
Flow control valves Unidirectional and bidirectional (meter-in, meter-out, orifice) banjo flow controllers Series SCU, MCU, SVU, MVU, SCO, MCO Ports M5, 1/8, 1/4, 3/8, 1/2 BSPP (without adapters) General
Hand lever valves VHER
Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:
valvole ad azionamento pneumatico
Valvole a spola /-5/-5/ con attacchi filettati G/8 -G/4 /-5/-5/ spool valves with G/8 -G/4 threaded ports Montaggio in linea, su collettori multipli o su basi manifold (pag. 9-0) Installation in-line,
Complementary valves: shuttle, quick exhaust and check valves
Complementary valves shuttle, quick exhaust and check valves Complementary valves are very important components of the pneumatic circuits. This group includes the: SHUTTLE VALVES: these valves are used
Hand slide valves W/VBOH
Hand slide valves W/VBOH Hand slide valves W/VBOH Product range overview Version Valve function Version Type Pneumatic connection 1 Pneumatic connection 2 qnn Page/ Internet [l/min] Hand slide valves 3/2-way,
Safety and Shut-off Block SAF/DSV
1. DESCRIPTION 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or user units. It complies with the relevant safety standards in accordance with
OPERATION MANUAL PNEUMATIC VALVES
OPERATION MANUAL PNEUMATIC VALVES DIRECTIVE 2014/34/EU ATEX ENGLISH Index 1 Product identification 2 Security 3 Guarantee 4 Transportation 5 Assemblage 6 Setting up 7 Adjustments 8 Technical information
Solenoid valves VZWF, force pilot operated
Key features and overview Function Normally closed solenoid valve with diaphragm and forced lifting. When the solenoid is energised, the differential pressure from the secondary side of the diaphragm is
SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection
SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 07-8 mm - pad mounting body M connection x/ - / - / Series 0 ISO 07- (8 mm) FEATURES M connection on top of valve: reduces
MECAIR CSN RAINTIGHT ENCLOSURE CLEAN AIR SOLUTIONS PRODUCT LEAFLET
CSN RAINTIGHT ENCLOSURE CLEAN AIR SOLUTIONS GENERAL CHARACTERISTICS CONSTRUCTION FEATURES ENCLOSURE OPERATING TEMPERATURE 20 C/+60 C COVER Diecast aluminium (anodised) WEIGHT CSN 5 3.5 kg CSN 8 5 kg CSN
FEPA PNEUMATICALLY AND SOLENOID ACTUATED VALVES, ONE UNIT MOUNTED TYPE VPG
PNEUMATICALLY AND SOLENOID ACTUATED VALVES, ONE UNIT MOUNTED TYPE VPG TECHNICAL CHARACTERISTICS Number of ways / positions : 3/2, 3/3, 5/2, 5/3, 5/4 Nominal sizes (ND) : 4, 6, 9, 12 Medium : compressed
AIR TREATMENT H Z E 0. Air Treatment Units CHARACTERISTICS CODIFICATION KEY. Filter. Ambient temperature Fluid Working pressure Max pressure Size Body
NEW - HZE Air Treatment Units CHARACTERISTICS Ambient temperature Working pressure Max pressure Body Knob Ring nut Bowl Bowl guard Filter element Seals Springs Diaphragm CODIFICATION KEY H Z E B 8 G +6
BW0500AO. ByWire Elements BW0500AO Element 4/3 with side ports IBW0500 Interface
ywire Elements Element 4/3 with side ports IW5 Interface efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES 398SW5EN - 5--8 Technical data Nominal flow 5 l/min 3. US
Safety and Shut-off Block SAF/DSV
Safety and Shut-off Block SAF/DSV 1. DESCRIPTION 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or consumers. It complies with the relevant safety
Check valve hydraulically pilot operated
Check valve hydraulically pilot operated RE 6/7.5 Replaces:. / Types SV and SL Nominal sizes to Component series X Maximum operating pressure 5 bar Maximum flow 55 l/min H555 Overview of contents Contents
Pressure reducing valve, direct operated, type DR 5 DP Huade América 1
Pressure reducing valve, direct operated, type DR 5 DP Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Pressure reducing valve, direct operated, type DR 5 DP Size 5 up to 31.5MPa up to
V83 series Redundant valve manifold systems - Modular with bypass 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability
V8 series Redundant valve manifold systems - Modular with bypass oo Safety, oo Availability and oo Safety and Availability > > Modular design - Maxseal valves > > able terminations inside coil housing
Type 0404 / /2-way solenoid valve 2/2-Wege-Magnetventil Électrovanne 2/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation
Type 0404 / 5404 2/2-way solenoid valve 2/2-Wege-Magnetventil Électrovanne 2/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation 1 OPERATING INSTRUCTIONS The operating instructions
Panel-mounted valves Series T, Ø 22.5 mm
Series T, Basic valve 3/2-way, M5 (10/32 UNF) M 5 and G 1/8 2.122 Basic valve 3/2-way, M5 (10/32 UNF) M 5 and G 1/8 2.122 Push button 18-T-23-011 2.126 Mushroom 18-T-23-012 2.126 2-position switch 18-T-23-013
Xpress L90LS Directional Control Valve. Catalog HY /UK December, 2001
Xpress L90LS Directional Control Valve Catalog HY17-8525/UK December, 2001 Catalogue HY17-8525/UK Technical Information Xpress - general information Xpress is a valve-customization service that enables
Flow control valves Series RFU - RFO 2/
CATALOGUE > Release 8.5 > Valves Series RFU - RFO Flow control valves Series RFU - RFO Unidirectional and bidirectional flow control valves Ports: M5, G1/8, G1/4, G3/8 and G1/ Nominal diameter: M5 = 1,5
Intrinsically safe solenoid valves on/off controls - ATEX certification
www.atos.com Table E130-17/E Intrinsically safe solenoid valves on/off controls - ATEX certification valve body valve spool intrinsically safe solenoid electrical connector manual override DHW-0611/WP/6
Solenoid Valves VUVG Overview
Solenoid Valves VUVG Overview Universal valve Combination of basic valve and E-boxes Width 10 mm and 14 mm In-line valves VUVG-L and VUVG-S Sub-base valves VUVG-B Internal or external pilot air supply
AIR WORK ISO 5599/1 VALVES - SIZE 1 AND 2 VALVE ISO 5599/1 TAILLE 1 E 2 / VALVOLE ISO 5599/1 TAGLIA 1 E
ISO 55/1 VALVES - SIZE 1 AND VALVE ISO 55/1 TAILLE 1 E VALVOLE ISO 55/1 TAGLIA 1 E The VI Series complies with ISO 55/1 norms. They are entirely made in aluminium in order to grant strength and long durability.
senes EK Spool valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 o. 2 Double pneumatic control Spool valves series E
Spool valves plot and solenod actuated G 1/8 - G 1/4 - G 1/2 senes EK Valves seres "EK" are produced n tre 3/2, and pneumatc functons. The plotng solenod valve can be assembled perpendcular respect tre
Precision pressure regulators LRP/LRPS
Precision pressure regulators LRP/LRPS q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
Operation Manual. Diaphragm Sensed Gas Pressure Regulators
687 Technology Way Napa, CA 94558 Phone: (707) 259-0102 FAX: (707) 259-0117 www.aptech-online.com Diaphragm Sensed Gas (AP/AZ/AK Models: 20, 100, 500, 1000, 1000T 10PA, 1100, 1200, 12PA, 1300, 1400T, 14PA,
Specifications. Model VEX Operating style Fluid Proof pressure Max. operating pressure
Power Valve Regulator Valve Series 1 Large Capacity Relief Regulator 3 port large capacity poppet exhausting regulator equipped with a relief port the same size as the connection port. Specifications Model
Pressure reducing valve, pilot operated, Model 3DR
RA 26 928/06.98 Pressure reducing valve, pilot operated, Model 3DR Nominal size 16 Series 5X Maximum operating pressure 3600 PSI (250 bar) Maximum flow 58.1 GPM (220 L/min) Contents Description Page Features
Air preparation units
Overview Description Page Characteristics Dimensions Order instructions Type overview unit three-piece 44, 45, 48 52 6 unit two piece 44, 45, 48 52 6 Filter-regulator 44, 45, 48 53 6 Filter-water-separator
OP11 OVERALL SPECIFICATIONS
The Directional Valve Series provides a compact range of manually operated directional valves for low flow applications. Because of the physical size of valves are ideally suited for mounting on small
Power Valve: Precision Regulator. High precision, large capacity relief regulator
Power Valve: Precision Regulator Series VEX High precision, large capacity relief regulator port large exhaust capacity pressure reducing valve which utilizes a nozzle flapper mechanism available as air
II 2G EEx ia IIC T6. Ignition protection class
ATEX General information According to 94/9/EC, a device that is to be used in an environment at risk of explosion may only be brought into the market if it satisfies the standards specified in the norm.
B84G - Excelon Plus Modular System General purpose filter/regulator
> Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Push to lock adjusting knob with built in tamper resistant
1 0,1 0,1-70 0, , , , Cylinder bore <
Working medium, air quality Working medium: Dry, filtered compressed air to ISO 8573-1 class 3.4.3. Recommended air quality for valves For best possible service life and trouble free operation, ISO 8573-1
Proportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
Application Note. Safety Sub-function PUS Category 1, up to PL c. Application Note PUS, Category 1, up to PL c M20 S22 R20 M1 Q20
Application Note Safety Sub-function PUS Category 1, up to PL c M20 Application Note PUS, Category 1, up to PL c M1 Q20 M2 S22 R20 G2 100227 Title... Application Note PUS, Category 1, up to PL c Version...
R84G - Excelon Plus Modular System Pressure regulators
> Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Easy to read flush mounted integrated pressure gauge as
Locator Locator-D-Lux Air-Saver G1 Air-Saver G2
170663_air_saving_products 17-02-2011 16:42 Pagina 1 Locator Locator-D-Lux Air-Saver G1 Air-Saver G2 AIR SAVING PRODUCTS 170663_air_saving_products 17-02-2011 16:42 Pagina 2 170663_air_saving_products
IP2, IP2A and IP2D. Spirax-Monnier International Compressed Air Filter/ Regulators
Page 1 of 6 TI-P510-01 H Issue 5 IP2, IP2 and IP2D ISO 9001 Spirax-Monnier International ompressed ir Filter/ Regulators ert. No. LRQ 0963008 Description The IP range of Spirax-Monnier international compressed
2/2- and 3/2-way Rocker Solenoid Valve - bistable (impulse) version
2/2- and 3/2-way Rocker Solenoid Valve - bistable (impulse) version Type 6624 Impulse can be combined with... 10mm width orifice DN 0.8 to 1.2 with pressure range vacuum to 5bar medium separation, for
PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R
PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure in a secondary part of a hydraulic circuit. Pressure is
Pneumatic spool valve islands
neumatic spool valve islands A7.GB.R MGA SOOL VALV ISLANDS MGA pneumatic spool valve islands offer maximum performance along with flexibility, easy installation and simple operation. Due to their design,
F l o w c o n T R o l v a l v E S
Composite Right Angle Flow Control Valves Series TMCU-TMVU-TMCO- BSP/METRIC Meter In, Meter Out, Needle Orifice G1/8, G1/, G3/8, G1/2 Banjo flow controllers Nominal diameters Ø 2-3.8-5.8-8 The Meter In,
Piloted Non-Return Valves
ed Non-Return Valves ed non-return valves are designed to protect installations: if the compressed air supply is removed, they lock the air supply to the cylinder, thus maintaining it in position. Product
Application Note. Safety Sub-functions SSC Category 1, up to PL c PUS Category 1, up to PL c. Application Note SSC, PUS, Category 1, up to PL c STOP
Application Note Safety Sub-functions SSC Category 1, up to PL c PUS Category 1, up to PL c Application Note SSC, PUS, Category 1, up to PL c STOP 100231 Title... Application Note SSC, PUS, Category 1,
3-Way Safety Block DSV
3-Way Safety Block DSV DSV 10 - M DSV 10 - M - T-ball DSV 10 - EY 1. Description 1.1. GENERAL The 3-way safety block is used to shut off and discharge hydraulic accumulators or consumers. It complies with
Hafner-Pneumatik presents: General information on ATEX 95 & Products for explosion hazardous environment from the Hafner range
Hafner-Pneumatik presents: Including Pneumatic Valves General information on ATEX 95 & Products for explosion hazardous environment from the Hafner range General information - 1 A product that is supposed
Pressure reducing valve, pilot operated
Pressure reducing valve, pilot operated RE 26928/09.07 Replaces: 10.97 1/8 Type 3DR Size 16 Component series 5X Maximum operating pressure 250 bar Maximum flow 220 l/min H5844 Table of contents Content
Features PNEUMAT IC VALVES. Angle seat valves Threaded end GENERAL FEATURES. Operating media
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
PRESSURE SEQUENCE VALVE TYPE UZK
PRESSURE SEQUENCE VALVE TYPE UZK Size 10, 20, 30 31,5 MPa up to 450 dm 3 /min WK 450 414 04. 2000r. Pressure sequence valves type UZK are used for switching a system or part of a system off when a set
Basic Pneumatics. Module 2: Direct Control of single acting cylinder PREPARED BY. IAT Curriculum Unit. January 2011
Basic Pneumatics Module 2: Direct Control of single acting cylinder PREPARED BY IAT Curriculum Unit January 2011 Institute of Applied Technology, 20011 Module 2: Direct Control of single acting cylinder
BL68 - Olympian Plus, plug-in system Filter/regulators and lubricators
>> Port size: 3/4... /2 (ISO G/ PTF) >> Complete air processing units pre-assembled, ready to install Technical features Medium: Compressed air only Maximum operating pressure: 7 bar (246 psi) Pressure
Solenoid valves CDSV, Clean Design
Key features Innovative Versatile Reliable Proven valve technology combined with a highly resistant polymer material. valve position 2 solenoid coils Flow rate 300 650 l/min Valve width 24 mm Connected
VS18/26 with PROFINET and EtherNet/IP Interface. ATEX Installation Instructions
VS18/26 with PROFINET and EtherNet/IP Interface ATEX Installation Instructions INDEX 1. INTENDED USAGE 3 2. OPERATING MANUAL ATEX 4 2.1 General conditions 4 2.2 Installation 5 2.3 Operating 5 2.4 Failures
Gas Pressure Regulator HON 502
Gas Pressure Regulator HON 502 Product information serving the gas industry worldwide Gas Pressure regulator HON 502 Application, Characteristics, Technical Data Application for offtake stations in gas
Single and double acting, magnetic, self-centering Bores: ø 16, 20, 25, 32, 40 mm
> Series CGPT self-centering parallel grippers with T-guide Series CGPT self-centering parallel grippers with T-guide Single and double acting, magnetic, self-centering Bores: ø 6, 20, 25, 32, 40 mm New
GH & GHL Series Gas-Over-Oil Valve Actuators
GH & GHL Series Gas-Over-Oil Valve Actuators Introduction Paladon s GH and GHL-Series use high pressure process gas to provide the energy required to power the actuator. To provide increased safety and
Directional Control valves
Chapter 10.1 Chapter 10 Directional Control valves 10.1 Check Valves Figure 10.1 Check valve wo conditions: free flow or "checked" flow Usually has a cracking pressure of 69 a 104 a (10-15 psi) If used
The Ins and Outs of I/P Transducers
The Ins and Outs of I/P Transducers By Mark B. Levine, ControlAir Inc. General description I/P transducers are versatile instruments that use an electrical control signal to proportionally regulate gas
Suitable for anyone who is required to maintain industrial pneumatic systems. No prior knowledge of pneumatic or electrical principles is necessary.
PNEUMATICS COURSE 660: 4 DAYS: Max 8 Candidates This course provides maintenance personnel and production operators etc with the skills and knowledge necessary to carry out maintenance tasks on pneumatic
Knife Gate Valves Pricelist 2017
Knife Gate Valves list 2017 Range of Knife Gate Valves * Manual and Actuated Knife Gate Valves * Accessories * Stafsjo Knife Gate Valves Knife Gate Valves list 2017 About Us All Valves Online Ltd are a
INDUSTRIAL PNEUMATICS - air treatment units. FIL filter
Due to its metal construction, the entire range of NEW DEAL elements is resistant to heavy duty working conditions. Designed for high pressure application (up to 18 bar). FIL filter Degree of filtration:
Liquid Level Controllers
Liquid Level Controllers ALL PUMPS LLC-2Y For both pump up and down control. Variable On/Off set points. NDP-15/20/25/32, DP-10/15 & *NDP-40/50/80 LLC-1 Pump up and down versions available. 6 to 12 differential
Safety and Shut-off Block SAF/DSV
Safety and Shut-off Block SAF/DSV 1. Description 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or consumers. It complies with the relevant safety
PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R
PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure in a secondary part of a hydraulic circuit. Pressure is
L6090 (LC04M-CBL) - L6095 (LC04M-CBD)
or 3 way pressure compensated flow regulators L69 (LC4M-CBL) - L695 (LC4M-CBD) RE 1833-4 Edition:.16 Replaces: 7.1 Size 4 Series Maximum operating pressure 31 bar (45 psi) Maximum flow (-way) 1 l/min (3.
IP2M, IP2AM and IP2DM Monnier International Compressed Air Filter/ Regulators
L ocal regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification
4/3 Directional valve elements L85L1...(EDC-LV) with manual lever operated control with flow sharing control (LUDV concept) L85L1...
4/3 Directional valve elements L8L1...(EDC-LV) with manual lever operated control with flow sharing control (LUDV concept) L8L1...(EDC-LV) RE 1831-17 Edition: 2.216 Replaces: 7.12 Size 6 Series Maximum
Panel-Mounting Flowmeters Purge Set (Flowmeter with Constant Flow Valve)
Panel-Mounting Flowmeters Purge Set (Flowmeter with Constant Flow Valve) When working pressure change, inside diaphragm and needle valve operates in order to always keeping a fixed flow rate for exact