SAFETY DATA SHEET. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

Transcription

1 SAFETY DATA SHEET SECTION 1: Identification of the substance/mixture and of the company/undertaking Identification of the substance or mixture Product code Product name Dynabeads MyOne Streptavidin T1, 100 ml, 10 mg/ml Company/undertaking identification Life Technologies Corporation 5781 Van Allen Way PO Box 6482 Carlsbad, CA Life Technologies Japan Co. Ltd Showajima Ota-ku, Tokyo Japan, TEL hour Emergency Response for Hazardous Materials Within the USA + Canada: and +1 [or Dangerous Goods] Incident. Spill, Leak, Fire, Exposure, or Accident. Call CHEMTREC Outside the USA + Canada: Country specific Emergency Number (if available): CHEMTREC Japan (Tokyo) +(81) (Greeting language: Japanese) Caution: For manufacturing, processing, or repacking GHS - Classification Signal word None Hazard pictograms None SECTION 2: Hazards identification Health hazards Not Hazardous Physical hazards Not Hazardous Environmental Hazards Not Hazardous Revision date 09-Dec-2016 Page 1 / 7

2 hazard statements Precautionary Statements Prevention Response Storage Disposal Other hazards SECTION 3: Composition/information on ingredients The product contains no substances which at their given concentration, are considered to be hazardous to health. Description of first aid measures SECTION 4: First aid measures Skin contact Eye contact INGESTION Inhalation Notes to Physician Rinse with plenty of water. Immediate medical attention is not required. Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Not expected to present a significant ingestion hazard under anticipated conditions of normal use. If you feel unwell, seek medical advice. Not expected to be an inhalation hazard under anticipated conditions of normal use of this material. Consult a physician if necessary. Treat symptomatically. Most important symptoms and effects, both acute and delayed Indication of any immediate medical attention and special treatment needed None. Extinguishing media SECTION 5: Firefighting measures Suitable Extinguishing Media Unsuitable Extinguishing Media Water spray. Carbon dioxide (CO2). Foam. Dry chemical. Special hazards arising from the substance or mixture Not known. Advice for fire-fighters Standard procedure for chemical fires. Revision date 09-Dec-2016 Page 2 / 7

3 SECTION 6: Accidental release measures Personal precautions, protective equipment and emergency procedures Ensure adequate ventilation. Always wear recommended Personal Protective Equipment. Use personal protection equipment. See Section 8 for more detail. Environmental precautions No special environmental precautions required. Methods and material for containment and cleaning up Soak up with inert absorbent material. Reference to other sections See section 8 for more information. SECTION 7: Handling and storage Precautions for safe handling Use personal protective equipment as required. No special handling advices are necessary. Conditions for safe storage, including any incompatibilities Keep in a dry, cool and well-ventilated place. Keep in properly labelled containers. Specific end use(s) Caution: For manufacturing, processing, or repacking. Control parameters SECTION 8: Exposure controls/personal protection Exposure Limits Engineering measures Contains no substances with occupational exposure limit values. Ensure adequate ventilation, especially in confined areas Exposure controls Personal protective equipment Respiratory protection Hand Protection Eye protection Skin and body protection Hygiene measures In case of insufficient ventilation wear respirators and components tested and approved under appropriate government standards. Wear suitable gloves Glove material: Compatible chemical-resistant gloves. Tight sealing safety goggles Wear suitable protective clothing Handle in accordance with good industrial hygiene and safety practice Environmental exposure controls No special environmental precautions required. Revision date 09-Dec-2016 Page 3 / 7

4 Information on basic physical and chemical properties SECTION 9: Physical and chemical properties Appearance Suspension Odour no data available ph 6-8 Melting point / melting range C Mixture has not been tested F Mixture has not been tested Boiling point / boiling range C Mixture has not been tested F Mixture has not been tested Flash point C Mixture has not been tested F Mixture has not been tested Autoignition temperature C Mixture has not been tested F Mixture has not been tested Decomposition temperature C Mixture has not been tested F Mixture has not been tested Evaporation rate Flammability (solid, gas) Upper explosion limit Mixture has not been tested Lower explosion limit Mixture has not been tested Vapour Pressure Mixture has not been tested Relative density Mixture has not been tested Specific gravity Solubility no data available Partition coefficient: n-octanol/water Explosive properties Mixture has not been tested OTHER INFORMATION SECTION 10: Stability and reactivity Reactivity Chemical stability Possibility of hazardous reactions Conditions to Avoid Incompatible Materials Hazardous decomposition products None known. Stable under normal conditions. Hazardous reaction has not been reported. No dangerous reaction known under conditions of normal use.. Revision date 09-Dec-2016 Page 4 / 7

5 SECTION 11: Toxicological information Information on toxicological effects There is no evidence available indicating acute toxicity. Principal Routes of Exposure Potential health effects Irritation Corrosivity Sensitisation STOT - Single Exposure STOT - Repeated Exposure Carcinogenicity Mutagenicity Reproductive toxicity Aspiration hazard SECTION 12: Ecological information Toxicity Contains no substances known to be hazardous to the environment or not degradable in waste water treatment plants. Persistence and degradability Bioaccumulative potential Results of PBT and vpvb assessment This mixture does not contain any substances that are assessed to be a PBT or a vpvb. Other adverse effects SECTION 13: Disposal considerations Waste treatment methods The generation of waste should be avoided or minimized wherever possible. Empty containers or liners may retain some product residues. This material and its container must be disposed of in according to approved disposal technique. Disposal of this product, its solutions or of any by-products, shall comply with the requirements of all applicable local, regional or national/federal regulations. Revision date 09-Dec-2016 Page 5 / 7

6 IATA / ADR / DOT-US / IMDG Not regulated in the meaning of transport regulations. SECTION 14: Transport information UN Number UN proper shipping name Transport hazard class(es) Packing group Environmental Hazards Special precautions for user Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code. Japan Chemical Inventories. SECTION 15: Regulatory information SECTION 16: Other information Unless specifically referenced in section 15 of this SDS, we have determined that this product does not require further notification or listing under the following Japanese regulations or laws: Fire Service Law, Poisonous and Deleterious Substance Control Law, Pollutant Release and Transfer Register, Industrial Safety and Health Law, Chemical Substance Control Law, Prohibition of Chemical Weapons and Regulation Specific Chemicals, Water Pollution Control Law, Air Pollution Control Law, Narcotics and Psychotropic Control Act, Stimulants Control Act, and Cannabis Control Act. Reason for revision SDS sections updated. Revision number 3 Revision date 09-Dec-2016 Caution: For manufacturing, processing, or repacking. Revision date 09-Dec-2016 Page 6 / 7

7 References ECHA:htp:/echa.europa.eu/ TOXNET:htp:/toxnet.nlm.nih.gov/ echemportal:htp:/ LOLIdatabase:htps:/ "The above information was acquired by diligent search and/or investigation and the recommendations are based on prudent application of professional judgment. The information shall not be taken as being all inclusive and is to be used only as a guide. All materials and mixtures may present unknown hazards and should be used with caution. Since the Company cannot control the actual methods, volumes, or conditions of use, the Company shall not be held liable for any damages or losses resulting from the handling or from contact with the product as described herein. THE INFORMATION IN THIS SDS DOES NOT CONSTITUTE A WARRENTY, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PUPOSE" End of Safety Data Sheet Revision date 09-Dec-2016 Page 7 / 7