Safety Valves Selecting Safety Valves
|
|
- Jane Howard
- 5 years ago
- Views:
Transcription
1 1
2 History In 1679 Denis Papin developed a pressure cooker using pressurized steam. While demonstrating it the first time to the Royal Society this pressure cooker exploded. Only after Papin invented the first safety valve his pressure cooker operated safely and in 1681 he achieved a patent on this design. Denis Papin is an Inventor of Ludwig Becker 1867 up to 1977 Denis Papin steam digester (1679) ARI- since 1978 Series 900 TÜV approved
3 Information needed to select Operating Data Type of fluid Liquid Vapour Gas Inflammable High Viscosity Toxic Risk to the environment Operating pressure of fluid Set pressure of safety valve Operating Temperature of fluid Capacity [kg/h]; [m3/h] or [Nm3/h] Back pressure Type of Safety Valve Type of connection Type of material Type of operation (if available) Calculation myvalve 3
4 Selection criteria for safety valves Type of Fluid Safety valve execution Liquid Toxic, inflammable Saturated Steam Neutral Gas Heat Transfer Oil, Fluid with solids, crystallising fluids, chemicals Closed bonnet, closed lifting device or gastight cap Closed bonnet, gastight cap or closed lifting device + stainless steel bellow Open bonnet, open lifting device or Closed Bonnet, open lifting device Open bonnet, open lifting device or Closed Bonnet, open or closed lifting device Closed bonnet, closed lifting device or Closed bonnet, gastight cap could be fitted with: stainless steel bellow, maybe heating jacket and/or rupture disc upstream of the safety valve Always check suitability of marterial and design for the application! 4
5 Type of Safety Valve Safety valves Direct loaded Safety valves Pilot operated Safety valves European-Standard SAFE ASME-Standard REYCO 5
6 Type of Safety Valve European-Standard ASME-Standard SAFE SAFE-TC SAFE-P SAFE-TCP ARI-REYCO R-Series ARI-REYCO RL40/41-Series ARI-REYCO RL14 Series DIN EN , PED97/23EC, AD 2000-A2, TRD421/721, EN12828 ASME Sec. VIII, API526 6
7 Opening characteristic Direct loaded Opening characteristic Full lift safety valve rapid opening Standard safety valve almost opening steadily, but not absolute linear Set pressure definition: Initial audible discharge 18. January 2016, Andreas Stall ARI - SAFE 7
8 ARI - are direct loaded F S =Spring force F D =A x P Force underneath the disc A direct loaded safety valve is a valve, in which the opening force underneath the valve disc is opposed by a closing force such as a spring. If the disc force F D is higher than the spring force F S, the Safety relief valve will properly relieve. A=Seat area P=System pressure Force = Seat area x System pressure Set Pressure occurs when F D = F S 18. January 2016, Andreas Stall ARI - SAFE 8
9 Opening characteristic Full lift safety valve A full lift safety valve is a valve which, after commencement of lift, opens rapidly within a 5% pressure rise up to the full lift as limited by the design. The amount of lift up to the rapid opening (proportional range) shall not be more than 20% of the total lift. Standard safety valve A standard safety valve is a valve which gradually opens until it reaches the degree of lift necessary for the mass flow to be discharged within a pressure rise of not more than 10%. No further requirements are made for the opening characteristics. 9
10 Characteristic: Full lift safety valve Type approved acc. EN ISO and TRD 421, TRD 721 / AD2000-A2 c = Overpressure: Acc. DIN/TRD max. 5% 1 s = Blow down Steam and gas: Max. 10% 1 or 0,3bar (whichever is greater) 1) Acc. EN only 10% overpressure and max. 15% blow down for steam and gas 10
11 Characteristic: Standard safety valve Type approved acc. EN ISO and TRD 421, TRD 721 / AD2000-A2 c = Overpressure: Acc. DIN/TRD max. 10% 1 or 0,1bar (whichever is greater) s = Blow down Steam and gas: Max. 10% 1 or 0,3bar (whichever is greater) Liquid : Max.20% or 0,6bar (whichever is greater) 1) Acc. EN only 10% overpressure and max. 15% blow down for steam and gas 11
12 Characteristic: EN- Type approved acc. EN ISO , TRD 421, TRD 721 and AD2000-A2 Capacity AGFW 505 Pressure 12
13 Selection criteria for safety valves Large capacity Rapid pressure rise Series Feature: DN outlet = DN inlet +2 x DN e.g. DN inlet =25, DN outlet =40 Small capacity Slow pressure rise Series Feature: DN outlet = DN inlett z.b. DN outlet =25, DN inlet = January 2016, Andreas Stall ARI - SAFE 13
14 Capacity comparison 3000 Example: Air, 10 bar, DN Capacity (Nm3/h) Full Lift BR 900 Standard BR Full Lift BR 940 Standard BR 950 Standard BR Series
15 Closed lifting device Closed bonnet Gastight cap Closed bonnet Open lifting device Open bonnet Open lifting device Closed bonnet PED, Fluid group 1 with stainless steel bellow PED, Fluid group 1 PED, Fluid group 2 PED, Fluid group 2 15
16 SAFE, Series 900 Fig Open lifting device -Closed bonnet Fig Open lifting device -Closed bonnet Fig Closed lifting device -Closed bonnet Fig Gastight cap -Closed bonnet Fig Open lifting device -Open bonnet Fig Open lifting device -Closed bonnet -Heating systems -EPDM-Bellow -EPDM-Disc -Low pressure steam -Heating systems -EPDM-Bellow 16
17 SAFE, Series 940 Fig Open lifting device -Closed bonnet Fig Open lifting device -Closed bonnet Fig Closed lifting device -Closed bonnet Fig Gastight cap -Closed bonnet Fig Open lifting device -Closed bonnet -Heating systems -EPDM-Bellow -EPDM-Disc -Low pressure steam -Heating systems -EPDM-Bellow 17
18 Stainless steel bellow Must always be vented. If the vent bore is closed with a plug or pressure gauge, then the valve is not balanced. Benefit: Compensate superimposed and built up back pressure (e.g. long outlet piping) More safe, because additionally with balanced piston Avoid spring and guide corrosion (chemicals) For toxic and inflammable media Without bellow <10% 18
19 30 Working pressure difference 10% up to 15% 25 Differential pressure % Set pressure P bar(ü) Recommended working pressure difference: 10% up to 15% Sample: 10bar System, 10/0,85=11,8bar Set pressure Pressure reducing station (PREDU) Working pressure difference 20% up to 25% Sample: 10bar down stream, 10/0,75 = 13,3bar 18. January 2016, Andreas Stall ARI - SAFE 19
20 Information needed to select Operating Data Type of fluid Liquid Vapour > Saturated Steam Gas Inflammable High Viscosity Toxic Risk to the environment Operating pressure of fluid > 10 barg Set pressure of safety valve >11.5 barg Operating Temperature of fluid > C Capacity [kg/h]; [m3/h] or [Nm3/h] > 1000 kg/h Back pressure > no Type of Safety Valve Type of connection > Flange Type of material > EN-JS1049 (nodular iron) Type of operation (if available) > Steam Boiler Nominal Pressure (PN) > PN16 or higher Calculation myvalve 20
21 Calculation ARI-myValve 21
22 Calculation ARI-myValve 22
23 Calculation ARI-myValve 23
24 Calculation ARI-myValve 24
25 Thank you for your attention
756 Safety Relief Valves
756 S a fe t y R e l i e f Va l ve s INTRODUCTION 756 Safety Relief Valves The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both
More informationSAFE/REYCO. More than 35,000 variations in DIN EN and ASME. NEW! Now with zero leakage in combination with SHR premium soft seal* (now up to +220 C)
NEW! Now with zero leakage in combination with SHR premium soft seal* (now up to +220 C) SAFE/REYCO More than 35,000 variations in DIN EN and ASME * Steam / Hot Water Resistance SAFE Full-lift safety valve
More information776 Cryogenic Safety Valve
776 Cryogenic Safety Valve INTRODUCTION 776 Cryogenic Safety Valve The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both plant
More informationARI-SAFE-SN ANSI Safety valve ANSI - safety valve Semi Nozzle (ANSI )
ARI-SAFE-SN ANSI Safety valve ANSI - safety valve Semi Nozzle (ANSI 150-300) ARI-SAFE-SN ANSI (Semi-Nozzle) ANSI-Safety Relief Valve Type-test approved acc. to ASME Code Section VIII-Division 1. UV-stamp
More informationPOP Safety Valve. POP Safety Valve INTRODUCTION DEFINITIONS
POP Safety Valve POP Safety Valve INTRODUCTION The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both plant and personnel. Safety
More informationSi C132. Safety valves for pressure relief in accordance to PED, DIN/EN and ASME. Engineering GREAT Solutions
Safety valves for pressure relief in accordance to PED, DIN/EN and ASME Engineering GREAT Solutions Si C132 Features The universal compact safety valve > 3 body seat sizes for appropriate size selection
More informationWelcome to the LESER Seminar, Taipei 28. June Design_of_safety_relief_valves_250804_Cal
Welcome to the LESER Seminar, Taipei 28. June 2006 1 Design of safety relief valves 2 Design of safety valves Target Classification of Pressure Relief Devices General design of Safety Relief valves 3 Design
More informationWhat is pressure relief valve? Pressure relief valve
What is pressure relief valve? Pressure relief valve What is: Relief valve Safety valve Safety relief valve Type of pressure relief valve Pressure relief valve sizing base What are the sizing basis of
More informationPressure reducing station. ARI-Pressure reducing station, self-acting or with electro-pneumatic control. ARI-PREsys -S. Pressure reducing station
ARI-, self-acting or with electro-pneumatic control ARI-PREsys -S for steam ready for operation self-acting or with electro-pneumatic control Pipe material: P235GH 1.4571/1.4541 Valve materials: EN-JL1040
More informationPRESSURE REDUCING VALVE RP45 (EN)
PRESSURE REDUCING VALVE RP45 (EN) DESCRIPTION The ADCA RP45 series pressure reducing valves are single seat bellows sealed controllers, operating without auxiliary energy, designed for use on steam, compressed
More informationDimensioning of Safety Valves Auditorium Tecnimont
Dimensioning of Safety Valves Auditorium Tecnimont 21.09.2016 Objective of the presentation Design of Safety Valves ASME VIII / API 520 The objective of the presentation is to show the design of safety
More informationPressure reducing station. ARI-Pressure reducing station, self-acting or with electro-pneumatic control. ARI-PREsys -S. Pressure reducing station
ARI-, self-acting or with electro-pneumatic control ARI-PREsys -S for steam ready for operation self-acting or with electro-pneumatic control Pipe material: P235GH 1.4571/1.4541 Valve materials: EN-JL1040
More informationSafety valves Index. Pressure reducing valves and safety valves FC-001 page 530
Index General information page Introduction 531 General information 532 Design features and accessories 535 Installation and operating instructions 540 Product information Weight-loaded page DIN flanges
More informationProduction capacity.
5500 The Company Production, R+D+i, evolution. VALVULAS NACIONAL, S.A. was established in Spain in 1976. The main target was to assist the petrochemical and chemical industries emerging in Spain at that
More informationC 10 Pressure Reducing Valve
C 10 Pressure Reducing Valve C 10 Direct Acting Pressure Reducing Valve The C10 balanced pressure reducing valve range is designed for use on water/air (gas) applications and for installations which have
More informationContents. LWN edition:
Contents 2.1 Introduction...2.1-1 2.2 Loading Principle...2.2-1 2.3 Primary / Secondary Pressure Zone...2.3-1 2.3.1 Nominal Sizes Inlet and Outlet...2.3-2 2.3.2 Angle Type Body...2.3-2 2.4 Vessel Connections...2.4-1
More informationBall Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300 DN 40, 50, 65
Data Sheet 819346-02 Issue Date: 05/17 Ball Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300, 50, 65 UNA 45hl MAX, UNA 46hl MAX, UNA 46Ahl MAX UNA 45v MAX with cover for mounting electrode
More informationPressure relief valve, safety relief valve Orifice area, discharge area, nozzle (throat) area, bore area, net flow area
Introduction 1 The World of Safety Valves In the World of Safety Valves and their applications we are developing LESER into a global leader who is a competent, reliable and responsive partner for its customers.
More informationCLASS TLP Pressure Reducing Valve
CLASS TLP Pressure Reducing Valve CLASS TLP Direct Acting Pressure Reducing Valve The Class TLP balanced direct acting pressure regulator is designed for use on installations that have varying inlet pressures
More informationBall Float Steam Trap UNA 43 PN 16/CL 125/JIS 10K UNA 46 PN 40/CL 150/CL 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6"
Data Sheet 819584-00 Issue Date: 01/17 Ball Float Steam Trap UNA 43 PN 16/C 125/JIS 10K UNA 46 PN 40/C 150/C 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6" UNA 43 hl, UNA 46 hl UNA 43 v, UNA 46 v with
More informationOperational Behaviour of Safety Valves with Constant Superimposed Backpressure
Operational Behaviour of Safety Valves with Constant Superimposed Backpressure Arne Gastberg Albert Richter ARI-Armaturen GmbH & Co. KG When selecting spring loaded safety valves, an accurate knowledge
More informationMAKING MODERN LIVING POSSIBLE. Pilot operated internal safety valves type POV REFRIGERATION AND AIR CONDITIONING DIVISION.
MAKING MODERN LIVING POSSIBLE Pilot operated internal safety valves type POV REFRIGERATION AND AIR CONDITIONING DIVISION Technical leaflet Contents Page Introduction...3 Features...3 Design...4 Technical
More informationCOMMITTEE DRAFT. API 520 Part I 10 th Edition Ballot Item 2.1. This ballot covers the following item:
This ballot covers the following item: API 520 Part I 10 th Edition Ballot Item 2.1 2008 12 Modify guidance to PRV datasheets (Line 17) to assist user s with determining the temperature to use for selecting
More informationPressure Reducing Valve DMV 750 set range: bar
Pressure Reducing Valve DMV 750 set range:.0-6.0 bar Advantage pressure setting possible at any time, also during operation hermetically sealed by valve diaphragm high level of operating safety and long
More informationSV5 Safety Valve Installation and Maintenance Instructions
3120036/3 IM-S13-12 CH Issue 3 SV5 Safety Valve Installation and Maintenance Instructions 1. General specification 2. Supply 3. Before fitting the valve 4. Installation 5. Damage prevention 6. Commissioning
More informationWater. VAG DUOJET Automatic Air Valve Single-chamber type PN 10/16/25/40 - DN KAT-A 1912
Water VAG DUOJET Automatic Air Valve Single-chamber type Product characteristics and benefits Resilient seated With flange end acc. to EN 1092-2 Single chamber air valve in compact design Very high discharge
More informationSV60 Safety valves. for use with steam, gas and liquids
SV60 Safety valves for use with steam, gas and liquids Spirax Sarco safety valves - protecting people, plant and profit The SV60 spring loaded full lift safety valve range from Spirax Sarco has been designed
More informationPressure Reducing Valve DMV 750
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Pressure Reducing Valve DMV 750 Advantages reduction
More information6301 TYPE CAST IRON SAFETY VALVES
Pressure (bar) 6301 TYPE CAST IRON SAFETY VALVES FEATURES The 6301 type safety valve is a device designed to protect installations against possible overpressure. It operates automatically and closes when
More informationPressure Reducing Valve for steam RP 45
Pressure Reducing Valve for steam RP 45 DESCRIPTION The RP45 series pressure reducing valves are single seat bellows sealed controllers, operating without auxiliary energy,designed for use on steam, compressed
More informationOperating and installation instructions Safety valves SAFE
Safety valves SAFE SAFE SAFE-P (Series 900) (Series 920) SAFE-TC (Series 940) 1.0 General information on operating instructions...2-2 2.0 Notes on possible dangers...2-2 2.1 Significance of symbols...
More information3-way control valves VK 3
Data sheet 3-way control valves VK 3 Description / Application VK 3 valves are a range of 3 port high specification flanged valves for chilled water, LPHW, MPHW, HPHW (low, medium or high pressure hot
More informationPRESSURE REDUCING VALVE RP45 (ANSI)
PRESSURE REDUCING VALVE RP45 (ANSI) DESCRIPTION The RP45 series pressure reducing valves are single seat bellows sealed controllers, operating without auxiliary energy, designed for use on steam, compressed
More informationPressure reducing valves Index
Index General information page Introduction 506 General introduction 507 for a steam plant 509 Product information BSP thread page Brass 510 ; BSP female thread 511 ; BSP male thread 513 Stainless steel
More informationTank Blanketing Regulators
Tank Blanketing Regulators Low-Pressure Reducing Regulator Type BR Low-Pressure Relief Valve Type BS Description Tank blanketing, or padding, is the process and practice of covering a stored commodity,
More informationPressure relief valve DHV 712 DN 65-80: 0,5-10 bar, DN : 0,3-4 bar, DN 100: 0,5-6 bar
Pressure relief valve DHV 7 DN 5-80: 0,5-0 bar, DN 5-00: 0, - bar, DN 00: 0,5 - bar Advantage for high pressure stability reliable reduction of pressure peaks and pulsations pressure setting possible at
More informationCrosby Style JCE Safety Relief Valves provide full overpressure protection for process systems at an affordable cost of ownership.
CROSBY Crosby Style JCE Safety Relief Valves provide full overpressure protection for process systems at an affordable cost of ownership. Design The Crosby Style JCE Safety Relief Valve incorporates a
More informationCash Valve TYPE KP PILOT OPERATED BACK PRESSURE VALVE. ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 9001 Certified
Cash Valve PILOT OPERATED BACK PRESSURE VALVE ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 01 Certified KP HIGH CAPACITY PILOT OPERATED BACK PRESSURE VALVE DESCRIPTION The Cash Valve Type KP is a pilot
More informationA soft sealed atmospheric safety valve with large flow capacity and soft seat tightness for steam condenser and turbine applications
SAPAG A soft sealed atmospheric safety valve with large flow capacity and soft seat tightness for steam condenser and turbine applications Features The Sapag Series 1100 steam safety valve is used for
More informationGUIDANCE IN-SERVICE INSPECTION PROCEDURES
GUIDANCE IN-SERVICE INSPECTION PROCEDURES Number: PEC 13 Prepared by: Pressure Equipment Committee (TC1) Status: Issue: 07 Date: 16 th January 2018 Reference: Guidance for safety valve examination. SITUATION:
More informationTank Blanketing Regulators
Tank Blanketing Regulators Low-Pressure Reducing Regulator Type BR Low-Pressure Relief Valve Type BS Description Tank blanketing, or padding, is the process and practice of covering a stored commodity,
More informationCAST IRON SAFETY VALVE TYPE 6301
CHARACTERISTICS The 6301 safety valve is dedicated to protect the equipment from potential overpressure. This is an automatic device that closes when the pressure conditions are back to normal. It is a
More informationfor for Industrial Refrigeration
Catalogue Shut-off Safety relief and regulating valves valves for for Industrial Refrigeration Contents Page Safety relief valves, type SFA 15 and SFA 15-50....3 Safety relief valves, type SFV 20-25....
More informationfor Building facilities Industrial facilities etc.,multipurpose Pilot operated type(high capacity)
for Building facilities Industrial facilities etc.,multipurpose Pilot operated type(high capacity This is a Pilot operated pressure reducing valve. It is suitable to install in the steam lines with the
More informationPressure Relief Valves
Pressure Relief Valves ANDERSON GREENWOOD flow control Contents Pressure Relief Valves Pressure Relief Valve Revised May 1998 Catalog: PRVTM-US.97 Note 1. Some referenced figures, tables, equations, or
More informationThe Crosby Style JCE Safety Relief Valve
s provide full overpressure protection for process systems at an affordable cost of ownership. Features Certified to BS6759 parts 1, 2 and 3 by SAFED. A.D.Merkblatt (TUV Approval). ASME Code Section VIII
More informationOperating and installation instructions Safety relief valves ARI-REYCO R / RL Series (Full Nozzle)
Safety relief valves (Full Nozzle) ARI REYCO R Series (Fig. 971) (Fig. 973) (Fig. 974) ARI REYCO RL Series (Fig. 966) (Fig. 968) (Fig. 969) Contents 1.0 General information on operating 7.0 Care and maintenance...
More informationSafety relief valves, type SFA 15
Safety relief valves, type SFA 15 Introduction SFA 15 are standard, back pressure dependent safety relief valves in angle-way execution, specially designed for protection of vessels and other components
More informationSeries 44 Self-operated Pressure Regulators. Type 44-1 B Pressure Reducing Valve. Type 44-6 B Excess Pressure Valve
Series Self-operated Pressure Regulators Type -6 B Excess Pressure Valve Application Set points from 0.2 to 20 bar with valves G ½, G ¾, and G as well as DN, DN 2, DN 0, and DN 0 Nominal pressure PN 2
More informationSafety Selector Valves Dual Pressure Relief Device System
ANDERSON GREENWOOD Features and enefits Provides a safe, efficient method of switching from an active pressure relief device to a standby, maintaining system overpressure protection regardless of Safety
More informationPressure & Flame Protection
Pressure & Flame Protection Safety & Regulating Valves Safety & Regulating Valves Pressure Reducing Valves - These valves are installed where there is a requirement to reduce the pressure from one level
More informationSafety relief valves, type BSV 8 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Safety relief valves, type BSV 8 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction....................................................................................... 3
More informationSeries 44 Self-operated Pressure Regulators. Type 44-0 B Pressure Reducing Valve. ANSI version
Series 44 Self-operated Pressure Regulators Type 44-0 B Pressure Reducing Valve ANSI version Application Set points from 3 to 290 psi (0.2 to 20 bar) with valves ½ NPT to 1 NPT as well as NPS ½ and 1 Pressure
More informationPROPORTIONAL SAFETY VALVE zarmak
2 PROPORTIONAL SAFTY VALV zarmak body material nominal pressure nominal diameter max. temperature ex.index A grey cast iron C 6 bar 5 300 C 250 250.A R acid resistant steel bar 0 300 C 2502CrNi F cast
More informationSafety relief valves SFV 20-25
MAKING MODERN LIVING POSSIBLE Technical brochure Safety relief valves SFV 20-25 www.danfoss.com/ir Contents Page Introduction........................................................................................3
More informationSafety relief valves Type SFV 20-25
Data sheet Safety relief valves Type SFV 20-25 SFV 20-25 are standard, back pressure dependent safety relief valves in angle-way execution, specially designed for protection of vessels and other components
More informationSeries 42 Self-operated Regulators Differential Pressure Regulators with Type 2424/Type 2428 Actuator (closing) Type Type 42-28
Series 42 Self-operated Regulators Differential Pressure Regulators with Type 2424/Type 2428 Actuator (closing) and balanced Type 2422 Valve Type 42-24 Type 42-28 Application Differential pressure regulators
More informationSafety relief valves Type BSV-8
Data sheet Safety relief valves Type BSV-8 BSV is a standard, back pressure independent safety relief valve, especially designed for protection of small components against excessive pressure and as a pilot
More informationSafety Valves. Product Information. It s all at Albion
Safety Valves Product Information It s all at Albion ART 642 Gunmetal Safety Valve Features Screwed BSP Parallel (ISO 228) Body Gunmetal Suitable for Gases, Liquids & Steam Fitted with Diaphragm to Protect
More informationCASH VALVE TYPE KP BACK PRESSURE VALVES
A high capacity pilot operated back pressure valve that offers accurate control and dependable protection against overpressure conditions FEATURES Automatically maintains maximum pressure in a vessel or
More informationPressure Reducing Valve DMV 755 set range: 1,0-9,0 bar
Pressure Reducing Valve DMV 755 set range:,0-9,0 bar Advantage pressure setting possible at any time, also during operation high reproducibility of the set pressure high level of operating safety and long
More informationPressure & Flame Protection
Pressure & Flame Protection Safety & Regulating Valves Safety and Regulating Valves SAFETY RELIEF VALVES Bailey safety relief valves offer a broad spectrum of protection against over-pressure for vital
More informationPressure Reducing Valve DMV 755
Pressure Reducing Valve DMV 755 Nominal size DN 10 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 1 to 9 bar control valve for reliable reduction of system pressures to
More informationZUERCHER MRCib Series
Pressure/Vacuum Rating Max inlet pressure: 16 bar Full Vacuum Leak Tight to EN 12266-1:2003 Leakage rate A For T = -10 C to +150 C: Leakage rate A For T = -20 C to -10 C: Leakage rate C Control Spring
More informationLESER Deutschland Standard CDTP Cold differential test pressure. Content
Page 1/23 Content 1 Purpose... 1 2 Scope... 1 3 References... 1 4 Introduction... 1 5 What is CDTP?... 2 6 What is CDTP-correction?... 2 7 Which influences on safety valves are covered with the setting
More information2-Port Seat Valves with Flange, PN 16
4 45 2-Port Seat Valves with Flange, PN 6 VVF45... dular cast iron EN-GJS-400-5 valve body DN 50...50 k vs 9...00 m /h Can be equipped with SKB...- or SKC...- electrohydraulic actuators Use For use in
More informationPressure reduction controller (PN 16, 25, 40)
Pressure reduction controller (PN 16, 25, 40) AFD / VFG 2( - for water AFD / VFGS 2 - for steam Description The controller has a control valve, an actuator with one control diaphragm and a spring for pressure
More informationKBV21i and KBV40i Key Operated Boiler Blowdown Valves Installation and Maintenance Instructions
4059051/3 IM-P405-48 EMM Issue 3 KBV21i and KBV40i Key Operated Boiler Blowdown Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4.
More informationSeries 44 Self-operated Pressure Regulators. Type 44-1 B Pressure Reducing Valve. Type 44-6 B Excess Pressure Valve. ANSI version
Series 44 Self-operated Pressure Regulators Type 44-1 B Pressure Reducing Valve Type 44-6 B Excess Pressure Valve ANSI version Application Set points from 3 to 290 psi (0.2 to 20 bar) with valves ½ NPT
More informationPROTEGO Pressure and Vacuum Relief Valves. Volume 6. in-line. Volume 6. for safety and environment
PROTEGO Pressure and Vacuum Relief Valves inline Volume 6 Volume 6 for safety and environment Pressure and Vacuum Relief Valves inline The working principle and application of pressure and vacuum relief
More informationSCA Series Inverted Bucket Steam Traps
0770050/5 IM-P077-06 ST Issue 5 SCA Series Inverted Bucket Steam Traps Installation and Maintenance Instructions 1. General safety information 2. General product information 3. Installation 4. Commissioning
More informationTube rupture in a natural gas heater
Tube rupture in a natural gas heater Dynamic simulation supports the use of a pressure safety valve over a rupture disk in the event of a tube rupture HARRY Z HA and PATRICK STANG Fluor Canada Ltd A fast
More information2-Port Seat Valves with Flange, PN 16
4 40 2-Port Seat Valves with Flange, PN 6 VVF4... Grey cast iron EN-GJL-250 valve body DN 50...50 k vs 9...00 m /h Can be equipped with SQX- electromotoric or SKD...-, SKB...- or SKC...- electrohydraulic
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 300 Flanges R.F. PN10/16-10 C + 80 C Max Pressure : 16 Bars up to DN200 Specifications : Removable stainless steel filter Bolted bonnet with
More informationMaterials : Stainless steel ASTM A351 CF8M
Certificat 3.1 Size: Ends : Min Temperature : Max Temperature : DN 15 to DN 200 PN16 Flanges R.F. - 20 C + 200 C Max Pressure : 16 Bars Specifiations : Removable stainless steel filter Bolted bonnet with
More informationMaterials : Carbon steel ASTM A216 WCB
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 400 ( NPS 2" to 16" ) Flanges R.F. Class 150 (PN20) - 29 C + 425 C Max Pressure : 20 Bars Specifications : Removable stainless
More informationCrosby style JCE Safety Valve Installation, Maintenance and Adjustment Instructions CROSBY
CROSBY Table of contents 1. Installation 1 1.1. Drainage 1 1.2. Discharge pipework 1 1.3. Preparation for installation 1 2. Pressure adjustment 1 3. Maintenance 1 4. Dismantling 1 4.1. All valve types
More informationStandard Series Safety Relief Valves
Assistance: Our experienced and fully trained team of Technical Sales Engineers and distributors are available to give advice and assistance on the sizing and selection of the Bailey Standard Series and
More informationpressure reducing valves
pressure reducing valves The function of a pressure reducing valve A pressure reducing valve is installed in-line. It is responsible for maintaining the downstream line pressure to the pressure set at
More informationSTAINLESS STEEL OVERFLOW VALVE TYPE 417
MAIN CHARACTERISTICS The 417 valve is intended for the discharge of fluids overflow when an upstream limitation of pressure is looked for, for example downstream to a pump. This valve also works in presence
More informationType 92S Pilot-Operated Steam Regulator
Type 92S Pilot-Operated Steam Regulator Introduction The Type 92S steam regulator is piston actuated for high cycle steam service which includes a Type 6492L, 6492H, or pilot (see Figure 1). These pilots
More informationPressure relief valve DHV 716 set range: 0,5-10,0 bar
Pressure relief valve DHV 7 set range: 0,5-0,0 bar Advantage pressure setting possible at any time, also during operation optimum monitoring valves high reproducibility of the set pressure high level of
More informationMounting and operating instructions EB 2530 EN. Self-operated Pressure Regulator. Pressure Reducing Valve Type M 44-2
Self-operated Pressure Regulator Pressure Reducing Valve Type M 44-2 Type M 44-2, connection G 1 4, K VS = 0.15 Type M 44-2, connection G 1, K VS = 6 Fig. 1 Type M 44-2 Pressure Reducing Valve Mounting
More informationThe benefits of system solutions for valve users
1/16 The benefits of system solutions for valve users 1. Introduction 2. System types 2.1. Pressure control 2.2. Temperature control 3. Technical process design 3.1. Checking of operating data 3.2. Selection
More information2 - way valve (NO) for steam, pressure relieved (PN 25) VGS - external thread
Data sheet 2 - way valve (NO) for steam, pressure relieved (PN 25) VGS - external thread Description VGS is pressure relieved 2-way normally open (NO) valves for steam, designed to be combined with: -
More informationPressure relief valve Engineering handbook
Pressure relief valve Engineering handbook Anderson Greenwood, Crosby and Varec products Technical publication No. TP-V300 Pressure relief valve engineering handbook Forward Copyright 2012 Emerson. All
More informationSafety relief valves Type SFA 15 and SFA 15-50
Data sheet Safety relief valves SFA 15 and SFA 15-50 SFA 15 and SFA 15-50 are standard, back pressure dependent safety relief valves in angleway execution, specially designed for protection of vessels
More informationNorval Pressure regulator
Norval Pressure regulator NORVAL Classification and Field of Application The NORVAL is a downstream pressure regulator, self actuated, spring loaded for medium and low pressure applications. It is suitable
More informationKBV21i and KBV40i Air Actuated Boiler Blowdown Valves
4059051/1 IM-P405-48 AB Issue 1 KBV21i and KBV40i Air Actuated Boiler Blowdown Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning
More informationRegulating valves REG-SA and REG-SB
MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG-SA and REG-SB REG-SA and REG-SB are angleway and straightway hand regulating valves, which act as normal stop valves in closed position.
More information3-1. Safety Relief Valve
-1 Step 0 Type/Structure/Features Please refer to this for type, structure and features of. Step 1 Selection Please look at the ID chart to choose the right products depending on the intended uses. Details
More informationPROTEGO Pressure and Vacuum Relief Valves. Volume 6. in-line. Edition for safety and environment
PROTEGO Pressure and Vacuum Relief Valves inline Volume 6 Edition 2009 PROTEGO at a glance More than 50 years ago, PROTEGO started developing special devices for protecting systems against explosions
More informationMERCER VALVE SERIES Pilot Operated THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
9500 SERIES Pilot Operated THINK...MERCER FIRST MERCER VALVE MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9500 Series Pilot Operated Product Overview The 9500 Series Safety Relief Valves are State of the
More informationSafety relief valves, type SFA 15 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Safety relief valves, type SFA 15 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction...3 Features...3 Technical data...4 Design...5 Capacity...6 Material specification...............................................................................8
More informationRegulating valves Type REG 6-65 Type REG-SS REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Regulating valves Type REG 6-65 Type REG-SS 15-40 REFRIGERATION AND AIR CONDITIONING Technical leaflet Content Page Introduction........................................................................................3
More informationL21S/SR/ST Glass Level Gauges
L21S/SR/ST Glass Level Gauges Doc. no.: 150, en_cat_l21s/sr/st, 12/2014 Type of code Example: L21ST/1450/AANSI 3/4 150Lb RF/Large chamber Code 1 Basic type L21 2 Type of gauge S Tubular level gauge SR
More informationThe flow direction must be observed during installation. It can be recognized by the following features: Flow direction. Gasket
6.2 Installation of the Safety Valve The correct installation within a plant is essential for the proper operation of a safety valve. Installation in this sense is e.g. - the choice of the gaskets - the
More informationPC 50. Pneumatic Control Unit for safety valve control with piston and lifting device. Engineering GREAT Solutions
Pneumatic Control Unit for safety valve control with piston and lifting device Engineering GREAT Solutions PC 0 Features The IMI Bopp & Reuther pneumatic control PC 0 is used to control safety valves with
More informationSerie ECO 3T. Threaded end back flow preventer with controllable reduced pressure zone. made in. Application fields. Protection E U R O P E
Serie ECO T Threaded end back flow preventer with controllable reduced pressure zone BRANDONI made in E U R O P E Application fields WATER FIRE FIGHTING DRINKING WATER 74 www.brandoni.it Serie ECO T The
More informationPilot Operated Pressure Reducing Valve
OPTIONS: USE: Pilot Operated Pressure Reducing Valve Steam & Compressed Air PRV 37 (DN15-DN50) DESCRIPTION The ADCA PRV37 pilot operated pressure reducing valves are designed for use on steam, compressed
More information