CALEFFI. Flow rate metering device. 683 series 01040/10 GB. Function

Size: px
Start display at page:

Download "CALEFFI. Flow rate metering device. 683 series 01040/10 GB. Function"

Transcription

1 low rate metering device 683 series CCRI 040/ GB ISO 900 M 64 ISO 900 No unction he flow rate metering device is used to measure the flow rate within a circuit. When used for central heating purposes, therefore, it allows monitoring of the thermal power supplied to the systems; in water treatment systems and industrial chemical or textile plants etc., it can be used to continuously monitor the water flowing through the circuits. his particular series of devices is equipped with quick-fit ports for easier differential pressure measurement. Product range 683 series low rate metering device, threaded connections sizes 3/4 and 683 series low rate metering device, flanged connections, to be coupled with counterflanges PN 6 sizes N 3 N 683 series low rate metering device, flanged connections, to be coupled with counterflanges PN 6 sizes N N 00 echnical specifications Materials Body: Gaskets: Screws: Nuts: Pressure test ports: Pressure test port seals: series 683 threaded 683 flanged brass N 6 CW67N brass N 64 CW64N PM painted steel asbestos free NBR fibre steel steel brass N 64 CW64N PM Performance Medium: Max. percentage of glycol: Max. working pressure: Working temperature range: Minimum for measurement: Connections Main: Pressure test ports: water, glycol solutions % bar - C 0,0 bar 3/4, /4 water, glycol solutions % 6 bar (N 3 N ), 6 bar (N N 00) - C 0,0 bar counterflange N 9- PN 6 (N 3 N ) counterflange N 9- PN 6 (N N 00) /4

2 imensions B C B C /4" " B 3 9 C Mass(kg) 0,30 0, N C , Mass(kg), 6,7 7,6,43 6,03 0,06 48,00 6,00 74,00 96,00 Operating principle he 683 series flow rate metering device operation is based on the Venturi effect. he metering device contains a diaphragm that, by restricting the cross-section of the channel, speeds up the medium and generates an increased (for measurement) at the ends, in order to guarantee precise flow rate metering. ach differential pressure value (measured at the ends of the diaphragm) has a corresponding accurate flow rate value, with the diaphragm Kv noted. he total head loss for the metering device is, however, very low since the length of the pipe downstream from the diaphragm allows the medium to slow down and increase the pressure again. (kpa) h 734 C) ) 'h α h = 'h sen α =,6 h )B) aria h (for mesurement) ) h (total head loss) ifferential pressure measurement he differential pressure can be measured using any pressure gauge or meter capable of operating within the range 0 kpa (0 0 mm w.g.; see adjacent figure). Whichever method or instrument is used, the air must be vented from the connection pipes to prevent errors when reading the differential pressure values. ) Caleffi LOM electronic measuring station (30 series) B) differential pressure gauges with dial C) inclined U-shaped pressure gauges with mercury column ) upturned U-shaped pressure gauges with water column ) a transparent plastic hose (resistant to the static pressure of the system), system water functioning as pressure gauge fluid, air trapped in the hose acting as a separator.

3 Construction details low rate monitoring can take place at any moment, without any of the pipes being dismantled. he patented self-cleaning single-casting diaphragm profile and the quick-fit pressure test ports offer rapid and accurate differential pressure measurement. Pressure measurement utomatic reclosure Safety cap Measuring syringe Seal element Hydraulic characteristics low rate measurement (l/s) G (m 3 /h) 0 Ø 3/4 N 3 N 40 N N 6 N 80 N N N N 7 N 00 { I.S. UNIS G =low rate in l/s = ifferential pressure in kpa water density (ρ) kg/dm 3 G= 0,9 0, G= 0,9 0, G= 0,337 0, G= 0,33 0, G= 0,989 0, G=,64 0, G=,438 0, G= 4,09 0, G= 9,03 0, G=,90 0, G=,806 0, G=,80 0, 0 3 0, 0,3 0, 0, , 0, N 00 N 7 N N N N 80 N 6 N N 40 N 3 " 3/4" (mm w.g.) 0, (kpa) Kv coefficients, localised losses and equivalent lengths, head losses I.S. UNIS (kpa) (mm w.g.) 0 3/4" " N 3 N 40 N N 6 N 80 N N N N 7 N 00 Ø 3/4 N 3 N 40 N N 6 N 80 N N N N 7 N 00 Kv ( kpa) 0,4 0,73 0,403 0,637,8,978,94 4,93 3,90 9,44 40,8 8,3 G =low rate in l/s = ifferential pressure in kpa water density (ρ) kg/dm 3 ξ ,7 0,9 0,7 le (m) = f (G) = 4,8769 G = 3,3637 G = 6,79 G =,46 G = 0,73 G = 0,7 G = 0,78 G = 0,044 G = 0,00 G = 0,00 G = 0,6-3 G = 0,93-3 G 0, , 0, 0, 0, 0,3 0, G (l/s) (m 3 /h)

4 Correction for liquids with different density he following notes apply to liquids with viscosity 3 (water and glycol mixtures, for example). If using liquids with a density different to that of water at 0 C (ρ = kg/dm 3 ), the head loss value measured may be corrected using the formula: = /ρ () where: = reference head loss = measured head loss ρ = liquid density in kg/dm 3 he value is used when measuring flow rate G, using the graphs or the formula (): G = Kv () xample of correction for liquid with different density Metering device N Liquid density ρ' =, kg/dm 3 Head loss measured on Venturi = 3 kpa Let us use formula (): Reference head loss = 3/, =,7 kpa his value is marked on the x-axis of the graph corresponding to the measured with the Venturi (green line); the point at which this value meets the line for the N metering device indicates the corresponding flow rate G = 7 l/s on the y-axis. Similarly, by using formula ():,7 G' = 408,96-3 = 6,64 l/s Sizing method he size of the metering device should be selected so that, when operating at the design flow rate, it has a corresponding minimum measured of mm w.g. ( kpa). Sometimes, to achieve this condition, it may be necessary to use a metering device with a diameter which is different to that of the pipe. In this case, a tapered fitting should be used (as illustrated in the figure below). min., d d Installation he metering device should be installed in the system during the initial setup phase, observing the flow direction indicated on its body and in accordance with the following instructions: - installation on the return pipe, in a position where it can be easily accessed for measurement purposes, with the pressure test ports facing upwards in order to prevent impurities from building up. he return water temperature has fewer variations, which increases measurement accuracy. - installation on a straight length of piping, either horizontally or vertically but not turned upside down, well away from twists or devices which may disrupt flow, particularly at the inlet, during measurement. In thermal installations, the metering device can be used in supply systems with several risers, branches or zones, to monitor the value of the individual flow rates or wherever metering of heating costs is required. he rapid flow rate monitoring keeps the system at optimal running conditions, making it possible to identify balancing variations caused by lockshield valves or other balancing and regulation devices, or by tampering. he application diagrams at the end of the brochure indicate the optimal points for flow rate monitoring: ) installation on the boiler circuit, ) installation on each riser, for system balancing monitoring, 3) installation on the horizontal sections of supply columns, as an alternative to point, 4) installation on each zone, for balancing throughout the system. d min., d ccessories Pair of fast-plug pressure/temperature test ports. heir special construction allows rapid and accurate measurements, guaranteeing a perfect hydraulic seal. Cap clamp available in the following colours: - Red for upstream pressure test port. - Green for downstream pressure test port. 0 Pair of fittings with fast-plug syringe for connection of pressure test ports to measuring instruments. emale /4 threaded connection. Max. working pressure: bar. Max. working temperature: C. Brass body. PM seals. emale /4 threaded connection. Working temperature range: - 30 C Max. working pressure: 30 bar. 30 LOM low rate and differential pressure electronic measuring station. Supplied complete with shut-off and connection fittings. Can be used for checking the correct operation of UOLOW devices. Measurement range: 0,0 00 kpa. ifferential Pmax: kpa Supply voltage 30 V (ac) Battery operated

5 max 0 C max C Pmax bar Pmax bar pplication diagrams Central heating system P Riser and zone systems Shut-off valve Zone valve xpansion vessel eaerator Ball valve Pump 3-way cock uel shut-off valve BLLSOP emperature gauge ifferential by-pass valve low switch Backflow preventer UOLOW irt separator emperature probe Safety thermostat emperature controller P Pressure switch Inspection pocket Gas filter Gas regulator Pressure reducing valve nti-vibration joint Pocket Safety valve Y-strainer

6 SPCIICION SUMMRY 683 series low rate metering device. hreaded connections 3/4 and. Brass body. Brass pressure test ports. PM pressure test port seals. hreaded connections /4 for pressure test ports. Medium water, glycol solutions. Maximum percentage of glycol %. Working temperature range - C. Maximum working pressure bar. Minimum for measurement 0,0 bar. Complete with quick-fit pressure test ports. 683 series low rate metering device. langed N 3 N 00 connections. Painted steel body. sbestos-free fibre NBR gaskets. Steel screws. Steel nuts. Brass pressure test ports. PM pressure test port seals. hreaded connections /4 for pressure test ports. langed connections. Coupling with counterflanges N 9- N 3 N, PN 6; N N 00, PN 6. Working temperature range - C. Maximum working pressure 6 bar (N 3 N ), 6 bar (N N 00). Minimum for measurement 0,0 bar. Complete with fast-plug pressure test ports, counterflanges, bolts and gaskets. 30 series LOM low rate and differential pressure electronic measuring station. Supplied complete with shut-off and connection fittings. It can be used to check UOLOW device operation falls within the working range. It can also be used to measure the flow rate of series 3 and 3 balancing valves, and of the 683 series metering device. Measurement range 0,0 00 kpa. Unit of measurement can be selected from Pa, kpa, mmw, mw, inw, mbar, PSI. Maximum line pressure 6 bar. Maximum differential pressure tolerated kpa. series Pair of fast-plug pressure and temperature test ports. threaded connections /4 M. Brass body. PM internal elements. Working temperature range - 30 C. Maximum working pressure 30 bar. series Pair of fittings with fast-plug syringe. hreaded connection /4. Maximum working temperature C. Maximum working pressure bar. We reserve the right to change our products and their relevant technical data, contained in this publication, at any time and without prior notice. S.p.. S.R.9, N. 80 ontaneto d gogna (NO) Italy el ax info@caleffi.com Copyright 0 Caleffi

Function. Code Automatic filling units with pressure gauge connection Size 1/2 Code Automatic filling units with pressure gauge Size 1/2

Function. Code Automatic filling units with pressure gauge connection Size 1/2 Code Automatic filling units with pressure gauge Size 1/2 utomatic filling units series 55 cert. n ISO 9 5/5 G Replaces 5/ G unction he automatic filling unit is a device consisting of a pressure reducing valve with compensating seat, an inlet strainer, a shut-off

More information

CALEFFI. DISCAL deaerator. 551 series 01060/17 GB. replaces dp 01060/14 GB

CALEFFI. DISCAL deaerator. 551 series 01060/17 GB. replaces dp 01060/14 GB ISL deaerator series RI ISO 900 M 654 LI 0060/7 G replaces dp 0060/4 G unction eaerators are used to continuously remove the air contained in the hydraulic circuits of heating and cooling systems. he air

More information

Pressure independent control valve (PICV) FLOWMATIC

Pressure independent control valve (PICV) FLOWMATIC Pressure independent control valve (PICV) FLOWMATIC 145 series FM 21654 003 01262/19 GB replaces dp 01262/17 GB Function The pressure independent control valve is a device composed of an automatic flow

More information

Function. brass EN CW617N brass EN CW617N brass EN CW614N. brass EN CW614N brass EN CW617N EPDM

Function. brass EN CW617N brass EN CW617N brass EN CW614N. brass EN CW614N brass EN CW617N EPDM Balancing valves series - cert. n 000 ISO 900 ALEFFI 0/0 GB Function Balancing valves are hydraulic devices that can precisely regulate the flow rate of the fluid that supplies a system s emitters. Hydraulic

More information

553 Series.

553 Series. 38467.03 www.caleffi.com Pre-adjustable filling units Copyright 01 Caleffi 3 Series Function The automatic filling valve is a device consisting of a pressure reducing valve with compensating seat, visual

More information

differential pressure regulating valve - threaded

differential pressure regulating valve - threaded 140-142 differential pressure regulating valve - threaded Introduction Differential pressure regulating valves (DPRV) maintain the differential pressure across a circuit or sub-branch at a set differential

More information

CALEFFI. Motorised temperature regulating unit for heating systems. 167 series 01239/15 GB. replaces dp 01239/13 GB. Function

CALEFFI. Motorised temperature regulating unit for heating systems. 167 series 01239/15 GB. replaces dp 01239/13 GB. Function Motorised temperature regulating unit for heating systems 67 series CCREDITED ISO 9 FM 65 CLEFFI 9/5 G replaces dp 9/ G Function The motorised temperature regulating unit is configured for use with an

More information

STV / STVL. Danfoss STV series of balancing valves provide testing and balancing of circuit flow for hydronic heating or cooling systems.

STV / STVL. Danfoss STV series of balancing valves provide testing and balancing of circuit flow for hydronic heating or cooling systems. Applications/ Features: Danfoss STV series of balancing valves provide testing and balancing of circuit flow for hydronic heating or cooling systems. STV valves provide a high level of balancing accuracy

More information

Versions. Benefits. Balancing DN15-32 DN40 DN50 DN15, DN20, DN25, DN32, DN40, DN50. Dimensions

Versions. Benefits. Balancing DN15-32 DN40 DN50 DN15, DN20, DN25, DN32, DN40, DN50. Dimensions Ballorex Delta Description The Ballorex Delta is a differential pressure control valve used in hydronic heating or cooling systems. By ensuring a constant differential pressure across motorized or static

More information

130400A 1/2 NPT Female A 3/4 NPT Female A 1 NPT Female A 1 1/4 NPT Female A 1 1/2 NPT Female A 2 NPT Female

130400A 1/2 NPT Female A 3/4 NPT Female A 1 NPT Female A 1 1/4 NPT Female A 1 1/2 NPT Female A 2 NPT Female 88.0A www.caleffi.com Venturi Style Balancing Valve Copyright 0 Caleffi 0 Series Function Product Range Balancing valves are hydraulic devices that can precisely control the flow rate of the fluid that

More information

CALEFFI. Pre-adjustable pressure reducing valves with self-contained cartridge series 01085/17 GB. replaces 01085/14 GB

CALEFFI. Pre-adjustable pressure reducing valves with self-contained cartridge series 01085/17 GB. replaces 01085/14 GB Pre-adjustable pressure reducing valves with self-contained cartridge - series CCREDITED ISO 9 FM CLEFFI /7 GB replaces / GB Function Pressure reducing valves are devices which, when installed on private

More information

CALEFFI. Ball zone valves. series /03 GB

CALEFFI. Ball zone valves. series /03 GB all zone valves series cert. n ISO / Function Zone valves are used to automatically shut-off the flow of carrier fluid distributed to a system. Specifically: -In central heating systems, they support the

More information

Filling valves AL, ALM Series Automatic filling units ALOMDIW, ALOMDNW Series

Filling valves AL, ALM Series Automatic filling units ALOMDIW, ALOMDNW Series Filling valves AL, ALM Series Automatic filling units ALOMDIW, ALOMDNW Series Main features Designed for automatic filling of sealed heating systems and for protection of the water mains from risk of contamination.

More information

ACCREDITED. Technical specifications series

ACCREDITED. Technical specifications series nti-pollution check valves 0-0-0-0-0 series REITE ISO 0 FM LEFFI 000/ G replaces dp 000/0G Function The anti-pollution check valve is a protective plumbing device capable of preventing the backflow of

More information

ACCREDITED. Function. series 5360/

ACCREDITED. Function. series 5360/ Pressure reducing valves series 360-36 - 36-366 RIT ISO 900 FM 6 LFFI 06/7 G replaces dp 06/0 G Function Pressure reducing valves are devices which, when installed on a private plumbing system, reduce

More information

Differential Pressure Control Valve (DPCV)

Differential Pressure Control Valve (DPCV) Differential Pressure Control Valve (DPCV) PATENTED Technical Data and Installation Instructions Page 1 V2 The modulating valves ART 241 balance and control the differential pressure (DPCV) automatically

More information

STAINLESS STEEL LOW PRESSURE REDUCING VALVE LPRV ELITE

STAINLESS STEEL LOW PRESSURE REDUCING VALVE LPRV ELITE MAIN CHARACTERISTICS The stainless steel LPRV elite low pressure reducer is intended for the pressure reduction of the fluids such as water, air, clear liquids not in charge of and the compatible gases

More information

STAD-D. Balancing valves Balancing valve for domestic water systems, DN Balancing valves

STAD-D. Balancing valves Balancing valve for domestic water systems, DN Balancing valves STAD-D Balancing valves Balancing valve for domestic water systems, DN 15-50 Balancing valves IMI TA / Balancing valves / STAD-D STAD-D The STAD-D balancing valve delivers accurate hydronic performance

More information

Pressure reducing valves Index

Pressure reducing valves Index Index General information page Introduction 506 General introduction 507 for a steam plant 509 Product information BSP thread page Brass 510 ; BSP female thread 511 ; BSP male thread 513 Stainless steel

More information

Self-operated Pressure Regulators for special applications

Self-operated Pressure Regulators for special applications Self-operated Pressure Regulators for special applications Type 2357-31 Pressure Build-up Regulator with safety function and integrated excess pressure valve Application Pressure regulators for cryogenic

More information

CALEFFI. Inclined pressure reducing valves series 01024/17 GB. replaces 01024/14 GB

CALEFFI. Inclined pressure reducing valves series 01024/17 GB. replaces 01024/14 GB Inclined pressure reducing valves 533 series RIT ISO 91 FM 15 LFFI /17 G replaces /1 G Function Pressure reducing valves are installed in residential water system to reduce and stabilise inlet pressure

More information

Description Pressure range Connection thread Device Page

Description Pressure range Connection thread Device Page Pressure Regulator Pressure range onnection thread Device Page max. 22 l/min miniature -850 0 mbar 1 8 NPT V800.02 max. 22 l/min miniature -850 0 mbar 10-32 and flange V900.02 max. 0 l/min precise -1 +0,.4

More information

ACCREDITED H series Inclined pressure reducing valve sizes DN 15 (1/2 ) and DN 20 (3/4 )

ACCREDITED H series Inclined pressure reducing valve sizes DN 15 (1/2 ) and DN 20 (3/4 ) Inclined pressure reducing valves 533..H series RIT ISO 91 FM LFFI /17 G replaces / G Function Pressure reducing valves are installed in residential water systems to reduce and stabilise inlet pressure

More information

STAD Series. Balancing and control valves. Technical Data Sheet. WattsIndustries.com

STAD Series. Balancing and control valves. Technical Data Sheet. WattsIndustries.com STAD Series Balancing and control valves Technical Data Sheet WattsIndustries.com Description STAD Series variable-orifice threaded valves are designed for flow control and monitoring in climate control

More information

BTV. Internally threaded 2-way control valve. Flow characteristics. Function

BTV. Internally threaded 2-way control valve. Flow characteristics. Function Internally threaded 2-way control valve The valves are designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. They are pressure balanced (from DN20-50, not DN15) and

More information

Function. size 1-¼ inch: 9-¾" size 1-½ inch: 11-¼" size 2 inch: 12-¾" A A A A A/96A A/99A

Function. size 1-¼ inch: 9-¾ size 1-½ inch: 11-¼ size 2 inch: 12-¾ A A A A A/96A A/99A Hydro separator CLEI 0076/6 N CCREDITED Replaces 0076/4 N ISO 900 No. 000 ISO 900 M 2654 unction The Caleffi 548 and N hydraulic separator creates a zone with a low pressure loss, which enables connected

More information

Art PRESSURE REDUCER

Art PRESSURE REDUCER FUNCTION ICMA pressure reducers are devices that reduce and stabilize the incoming pressure from the water supply. Pressure reducers allow correct use on domestic systems, reducing malfunctions due to

More information

Pre-adjustable pressure reducing valves with self-contained cartridge

Pre-adjustable pressure reducing valves with self-contained cartridge Pre-adjustable pressure reducing valves with self-contained cartridge 535..H series ACCREDITED ISO 91 FM 15 15/17 GB replaces 15/1GB Function Pressure reducing valves are devices which, when installed

More information

Installation, commissioning and servicing instructions

Installation, commissioning and servicing instructions 3838.10 www.caleffi.com Inclined pressure reducing s opyright 2018 aleffi 33 series Installation, commissioning and servicing instructions Function Pressure reducing s are installed in residential water

More information

CALEFFI. Reduced pressure zone backflow preventer. 574 series 01022/18 NA D E C F B D E. Function

CALEFFI. Reduced pressure zone backflow preventer. 574 series 01022/18 NA D E C F B D E. Function Reduced pressure zone backflow preventer series LEFFI 01022/18 N REITE ISO 9001 FM 216 ISO 9001 No. 000 Function The backflow preventer can be used in all plumbing systems where there is danger of the

More information

Solar Technology. Advantages. Everything from a single source Compact and modern design Customized models on request

Solar Technology. Advantages. Everything from a single source Compact and modern design Customized models on request Solar Technology Advantages Everything from a single source Compact and modern design Customized models on request 2 Innovative Products For Your Success Watts Industries Deutschland GmbH Division: Watts

More information

Ballorex Dynamic Description. Versions. Benefits. Balancing

Ballorex Dynamic Description. Versions. Benefits. Balancing Ballorex Dynamic Description The Ballorex Dynamic valve is a combined pressure independent flow limiter and control valve which maintains a constant flow independently of pressure changes in heating or

More information

STAP. Differential pressure controller DN

STAP. Differential pressure controller DN STAP Differential pressure controller DN 65-100 Pressurisation & Water Quality Balancing & Control Thermostatic Control ENGINEERING ADVANTAGE The flanged STAP is a high-performing differential pressure

More information

Pressure Independent Control Series

Pressure Independent Control Series Document No. 155-522 Pressure Independent Control Series Two-Way Cast Iron Flanged Bodies, ANSI 125 and 250 Description Siemens Pressure Independent Control Valves integrate three functions into a single

More information

STAG. Balancing valves Balancing valve with grooved ends DN

STAG. Balancing valves Balancing valve with grooved ends DN STAG Balancing valves Balancing valve with grooved ends DN 65-300 IMI TA / Balancing valves / STAG STAG A grooved end, ductile iron balancing valve that delivers accurate hydronic performance in an impressive

More information

61 Series Pilots for Pilot-Operated Pressure Reducing Regulators

61 Series Pilots for Pilot-Operated Pressure Reducing Regulators 61 Series Pilots for Pilot-Operated Pressure Reducing Regulators June 2011 Introduction 61 Series pilots are used with Types 1098-EGR and EZL pressure reducing regulators. These pilots can also be integrally

More information

Type 1098-EGR. Pilot-Operated Valve Link Regulators. Features. Fisher Controls

Type 1098-EGR. Pilot-Operated Valve Link Regulators. Features. Fisher Controls Type 1098-EGR and Type 1098H-EGR VL1000 FIELDVUE Pilot-Operated Valve Link Regulators Fisher Controls January 1982 Bulletin The Type 1098-EGR and Type 1098H-EGR regulators (figure 1) provide economical

More information

RR 16 Commercial & Industrial Regulator

RR 16 Commercial & Industrial Regulator Gas RR 16 Commercial & Industrial Regulator Applications The RR 16 regulator is designed for industrial use: gas supply networks, district stations, industries, heating plants, as well as for all installations

More information

Gas Filters DN15 DN300. elektrogas.com EE151 06/13

Gas Filters DN15 DN300. elektrogas.com EE151 06/13 FG Gas Filters DN15 DN300 elektrogas.com EE151 06/13 FG Gas Filters Contents Description.. 2 Features.. 2 Functioning and application. 3 Accessories and optionals 4 Technical specifications 4 Gas flow

More information

Two-port valves, male threaded, PN25

Two-port valves, male threaded, PN25 4 379 Two-port valves, male threaded, PN25 VVG55... Two-port valves, externally threaded, PN25 Bronze Rg5 DN15... 25 mm (½"... 1") k vs 0.25... 6.3 m 3 /h Stroke 5.5 mm Suitable for type SQS35... or SQS65...

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 400 Flanges GN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN 200 ( 10 bars over ) Specifications : Removable stainless steel filter Bolted

More information

T208VR Series Tank Blanketing Vacuum Regulator

T208VR Series Tank Blanketing Vacuum Regulator February 2014 T208VR Series Tank Blanketing Vacuum Regulator Figure 1. Typical T208VR Series Vacuum Regulator Introduction The T208VR Series direct-operated vacuum regulators are used where a decrease

More information

STAD. Balancing valves DN 15-50

STAD. Balancing valves DN 15-50 STAD Balancing valves DN 15-50 IMI TA / Balancing valves / STAD STAD The STAD balancing valve delivers accurate hydronic performance in an impressive range of applications. Ideally suited for use on the

More information

Materials : Brass body dezincification-resistant up to DN1 1/4

Materials : Brass body dezincification-resistant up to DN1 1/4 Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 2" Male, Male BSP + 5 C + 65 C Max Pressure : 10 Bars Specifications : Brass body dezincification-resistant up to DN1 1/4 Controlable With male

More information

Serie ECO 3F. Flanged back flow preventer with controllable reduced pressure zone. made in. Application fields. Protection

Serie ECO 3F. Flanged back flow preventer with controllable reduced pressure zone. made in. Application fields. Protection Flanged back flow preventer with controllable reduced pressure zone made in Application fields WATER FIRE FIGHTING DRINKING WATER 64 www.brandoni.it The ECO 3F flanged backflow preventers, which have a

More information

3-way control valves VK 3

3-way control valves VK 3 Data sheet 3-way control valves VK 3 Description / Application VK 3 valves are a range of 3 port high specification flanged valves for chilled water, LPHW, MPHW, HPHW (low, medium or high pressure hot

More information

2-port seat valves PN25 with externally threaded connections

2-port seat valves PN25 with externally threaded connections 4 379 2-port seat valves PN25 with externally threaded connections VVG55.. Valve body bronze CC491K (Rg5) DN 15...25 (½...1 ") kvs 0.25...6.3 m3/h Stroke 5.5 mm Sets of ALG.. with threaded and ALS.. with

More information

STAP. Differential pressure controller DN 15-50

STAP. Differential pressure controller DN 15-50 Differential pressure controller 15-50 Pressurisation & Water Quality Balancing & Control Thermostatic Control ENGINEERING ADVANTAGE is a high-performing differential pressure controller that keeps the

More information

Ratio Regulator Zero Governor. FRG/6 Series

Ratio Regulator Zero Governor. FRG/6 Series Ratio Regulator Zero Governor FRG/6 Series CSA Certified ANSI Z21.18 / CSA 6.3 CSA Requirement # 5.01 Zero Governor and Gas/Air Regulator File # 157406 US and Canadian Models FRG 705/6 FRG 707/6 FRG 710/6

More information

Serie ECO 3T. Threaded end back flow preventer with controllable reduced pressure zone. made in. Application fields. Protection E U R O P E

Serie ECO 3T. Threaded end back flow preventer with controllable reduced pressure zone. made in. Application fields. Protection E U R O P E Serie ECO T Threaded end back flow preventer with controllable reduced pressure zone BRANDONI made in E U R O P E Application fields WATER FIRE FIGHTING DRINKING WATER 74 www.brandoni.it Serie ECO T The

More information

Seated valves VRB 3, VRG 3

Seated valves VRB 3, VRG 3 Data sheet Seated valves VRB 3, VRG 3 Description VRB, VRG valves provide a quality, cost effective solution for most water and chilled applications. These valves may be used with glycol concentrations

More information

TECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS

TECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS TECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS THE COMPANY ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and

More information

Integral type Differential pressure flowmeter VNT Series

Integral type Differential pressure flowmeter VNT Series Integral type Differential pressure flowmeter VNT Series OUTLINE VH series Wafer-Cone differential pressure flowmeter and high precision differential pressure transmitter are integrated into one flowmeter.

More information

Serie 06-M6. Swing wafer check valve. made in. Application fields. Check valves E U R O P E WATER CONDITIONING INDUSTRY

Serie 06-M6. Swing wafer check valve. made in. Application fields. Check valves E U R O P E WATER CONDITIONING INDUSTRY Swing wafer check valve BRANDONI made in E U R O P E Application fields WATER CONDITIONING INDUSTRY HEATING 38 www.brandoni.it The valves in series 06 are swing wafer check valves, manufactured in accordance

More information

TECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS

TECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS TECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution

More information

STAD-C. Balancing valve ENGINEERING ADVANTAGE

STAD-C. Balancing valve ENGINEERING ADVANTAGE STA-C Balancing valve Pressurisation & Water Quality Balancing & Control Thermostatic Control ENGINEERING AVANTAGE The STA-C balancing valve has been specially developed for use in indirect cooling systems

More information

Regulating valves Type REG 6-65 Type REG-SS REFRIGERATION AND AIR CONDITIONING. Technical leaflet

Regulating valves Type REG 6-65 Type REG-SS REFRIGERATION AND AIR CONDITIONING. Technical leaflet Regulating valves Type REG 6-65 Type REG-SS 15-40 REFRIGERATION AND AIR CONDITIONING Technical leaflet Content Page Introduction........................................................................................3

More information

Materials : Stainless steel ASTM A351 CF8M

Materials : Stainless steel ASTM A351 CF8M Certificat 3.1 Size: Ends : Min Temperature : Max Temperature : DN 15 to DN 200 PN16 Flanges R.F. - 20 C + 200 C Max Pressure : 16 Bars Specifiations : Removable stainless steel filter Bolted bonnet with

More information

STAP. Differential pressure controllers DN , ANSI fl anges

STAP. Differential pressure controllers DN , ANSI fl anges STAP Differential pressure controllers DN 65-100, ANSI fl anges IMI TA / Differential pressure controllers / STAP STAP The fl anged STAP is a high-performing differential pressure controller that keeps

More information

RR 16 Commercial & Industrial Regulator

RR 16 Commercial & Industrial Regulator RR 16 Commercial & Industrial Regulator The RR 16 regulator is designed for industrial use: gas supply networks, district stations, industries, heating plants, as well as for all installations where accurate

More information

STAP. Differential pressure controllers DN , ANSI flanges

STAP. Differential pressure controllers DN , ANSI flanges STAP Differential pressure controllers DN 65-100, ANSI flanges IMI TA / Differential pressure controllers / STAP STAP The flanged STAP is a high-performing differential pressure controller that keeps the

More information

DN 65 to 100 R.F. PN10 flanges + 5 C + 65 C Max Pressure : 10 Bars Specifications : Brass check valve Controlable With valves DN1/2

DN 65 to 100 R.F. PN10 flanges + 5 C + 65 C Max Pressure : 10 Bars Specifications : Brass check valve Controlable With valves DN1/2 Size : Ends: Min Temperature : Max Temperature : DN 65 to 100 R.F. PN10 flanges + 5 C + 65 C Max Pressure : 10 Bars Specifications : Brass check valve Controlable With valves DN1/2 Materials : Bronze body

More information

HERZ-Motorised flow controler

HERZ-Motorised flow controler HERZ-Motorised flow controler Control and regulating valve Data sheet 46, Issue 214 Dimensions in mm 4 close dimension 9,35 M DN G H1 H2 H2 + Actuator B1 B2 1 2 M 1 46 11 15 3/4 G 66 59 73 134 49 63 48

More information

Differential pressure controller (PN 16) AHP - return mounting, adjustable setting

Differential pressure controller (PN 16) AHP - return mounting, adjustable setting Data sheet Differential pressure controller (PN 16) AHP - return mounting, adjustable setting Description DN 15-40 DN 50 DN 65-100 AHP is a self-acting differential pressure controller primarily for use

More information

VARIABLE ORIFICE BALANCING VALVE PN 25 TECHNICAL DATA SHEET. Approved by*: Main features:

VARIABLE ORIFICE BALANCING VALVE PN 25 TECHNICAL DATA SHEET. Approved by*: Main features: VARIABLE ORIFICE BALANCING VALVE PN 787 Main features: Technical data: Cim 787 is used for balancing the flow in cooling, heating and domestic water systems. Cim 787 is a combined manual presetting valve

More information

50Hz. water solutions. O SerieS DGO DRO

50Hz. water solutions. O SerieS DGO DRO Hz water solutions O SerieS DGO DRO D a t a b o o k l e t EN water solutions O SerieS DGO DRO Hz D a t a b o o k l e t O SERIES O Series General characteristics AISI stainless steel lifting and carrying

More information

Ball Float Steam Trap UNA 43 PN 16/CL 125/JIS 10K UNA 46 PN 40/CL 150/CL 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6"

Ball Float Steam Trap UNA 43 PN 16/CL 125/JIS 10K UNA 46 PN 40/CL 150/CL 300/JIS 10K/JIS 20K DN 80, 100, 150, 3, 4, 6 Data Sheet 819584-00 Issue Date: 01/17 Ball Float Steam Trap UNA 43 PN 16/C 125/JIS 10K UNA 46 PN 40/C 150/C 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6" UNA 43 hl, UNA 46 hl UNA 43 v, UNA 46 v with

More information

Regulating valves REG-SA and REG-SB

Regulating valves REG-SA and REG-SB MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG-SA and REG-SB REG-SA and REG-SB are angleway and straightway hand regulating valves, which act as normal stop valves in closed position.

More information

KTM 50 (DN ) Installation, maintenance and operating instructions

KTM 50 (DN ) Installation, maintenance and operating instructions 52 762-306 09.2014 KTM 50 (DN 100-200) Installation, maintenance and operating instructions General High-performing and compact, these pressure-independent control valves for variable flow heating and

More information

STA. Double regulating valves DN 15-50

STA. Double regulating valves DN 15-50 STA Double regulating valves DN -0 IMI TA / Balancing valves / STA STA The STA double regulating valve delivers accurate hydronic performance in an impressive range of applications. Ideally suited for

More information

HERZ - Compact Flow Controller with

HERZ - Compact Flow Controller with HERZ - Compact Flow Controller with Integrated Control Valve Data sheet for flanged compact PIBCV PN 16, Issue 1016 Dimensions in mm min. 200 mm control valve cone valve seat H flow controller cone actuator

More information

High Performance BSP Dial Up Pattern Pressure Reducing Valve

High Performance BSP Dial Up Pattern Pressure Reducing Valve See our full range online at: www.vip-ltd.co.uk High Performance BSP Dial Up Pattern Pressure Reducing Valve VIP Product Code 31/0103 FUNCTION Pressure reducing valves are devices which, when installed

More information

STAD. Balancing valves DN (MD60, MD61, MD62)

STAD. Balancing valves DN (MD60, MD61, MD62) STAD Balancing valves DN 15-50 (MD60, MD61, MD62) IMI TA / Balancing valves / STAD STAD The STAD balancing valve delivers accurate hydronic performance in an impressive range of applications. Ideally suited

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 300 Flanges R.F. PN10/16-10 C + 80 C Max Pressure : 16 Bars up to DN200 Specifications : Removable stainless steel filter Bolted bonnet with

More information

Differential pressure controller (PN 25) AVP - return and flow mounting, adjustable setting

Differential pressure controller (PN 25) AVP - return and flow mounting, adjustable setting Differential pressure controller (PN 25) AVP - return and flow mounting, adjustable setting Description AVP(-F) is a self-acting differential pressure controller primarily for use in district heating systems.

More information

STAD-C. Balancing valves DN 15-50

STAD-C. Balancing valves DN 15-50 STAD-C Balancing valves 15-50 IMI TA / Balancing valves / STAD-C STAD-C The STAD-C balancing valve has been specially developed for use in indirect cooling systems but performs just as effectively in refrigerated

More information

Measurement of Low GAS & Liquid Flows

Measurement of Low GAS & Liquid Flows Measurement of Low GAS & Liquid Flows The Measurement Measurement with a float in a tapered borosilicate glass tube. Series 2100 with a 100 mm flow tube Series 2150 with a 150 mm flow tube Series 2300

More information

Installation and commissioning instructions 255 series and 256 series

Installation and commissioning instructions 255 series and 256 series Installation and commissioning instructions 255 series and 256 series Table of contents 1 General information... 3 1.1 About these instructions... 3 1.2 About this product... 3 1.3 Appropriate usage...

More information

DN 1/2" to 2" Female BSP + 0 C C Max Pressure : 16 Bars Specifications : Stainless steel removable filter Female / Female With draining valve

DN 1/2 to 2 Female BSP + 0 C C Max Pressure : 16 Bars Specifications : Stainless steel removable filter Female / Female With draining valve Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 2" Female BSP + 0 C + 120 C Max Pressure : 16 Bars Specifications : Stainless steel removable filter Female / Female With draining valve Materials

More information

CLASS TLP Pressure Reducing Valve

CLASS TLP Pressure Reducing Valve CLASS TLP Pressure Reducing Valve CLASS TLP Direct Acting Pressure Reducing Valve The Class TLP balanced direct acting pressure regulator is designed for use on installations that have varying inlet pressures

More information

RB 4700 Commercial & Industrial Regulator

RB 4700 Commercial & Industrial Regulator RB 4700 Commercial & Industrial Regulator The RB 4700 regulator is designed for use in industrial and distribution applications such as district station and heating plants, and for industrial customers.

More information

V311. Venta. Three-way Plug Valve, Flanged PN 16

V311. Venta. Three-way Plug Valve, Flanged PN 16 1 Three-way Plug Valve, Flanged PN 16 can be used in a wide range of applications, such as heating, cooling, air handling and domestic hot water systems. Soft EPDM seals provide tight shut off. The valve

More information

V5434T/H THREE-WAY ROTARY VALVE PN10 AND H-EXTENSION

V5434T/H THREE-WAY ROTARY VALVE PN10 AND H-EXTENSION V544T/H THREE-WAY ROTARY VALVE PN10 AND H-EXTENSION FEATURES PRODUCT DATA Chrome-plated plug for long life-span Optimized characteristics for supply water temperature control All around changeable rotary

More information

TA-FUSION-P. Combined control & balancing valves Pressure independent combined balancing and control valves with independent EQM characteristics

TA-FUSION-P. Combined control & balancing valves Pressure independent combined balancing and control valves with independent EQM characteristics TA-FUSION-P Combined control & balancing valves Pressure independent combined balancing and control valves with independent EQM characteristics IMI TA / Control valves / TA-FUSION-P TA-FUSION-P These innovative

More information

Balancing Valves. Applications/ Features: Ordering Information: Accessories:

Balancing Valves. Applications/ Features: Ordering Information: Accessories: Applications/ Features: Danfoss MSV balancing valves are designed to provide terminal or circuit flow balance in hydronic heating or cooling systems. Each valve provides a high level of balancing accuracy

More information

Mounting and Operating Instructions EB 3017 EN. Self-operated Regulators

Mounting and Operating Instructions EB 3017 EN. Self-operated Regulators Self-operated Regulars Flow and Differential Pressure Regular Type 42-37 Flow and Differential Pressure or Flow and Pressure Regular Type 42-39 Type 42-37 Type 42-39 Fig. 1 Flow and differential pressure

More information

Technical Data Sheet T 2025

Technical Data Sheet T 2025 Self-operated emperature Regulators emperature Regulator ype 4 Valve closes when the temperature rises. emperature Regulator ype 4u Valve opens when the temperature rises. Balanced single-seated globe

More information

Gas Filters DN15 DN300. delta-elektrogas.com EE151 03/17

Gas Filters DN15 DN300. delta-elektrogas.com EE151 03/17 FG Gas Filters DN15 DN300 delta-elektrogas.com EE151 03/17 FG Gas Filters Contents Description.. 2 Features.. 2 Functioning and application. 3 Technical specifications 4 Gas flow chart (pressure drop)

More information

Magnetic Level Gauges

Magnetic Level Gauges Bulletin B 03 04 Magnetic Level Gauges Remote Reading Systems Magnetic Level Switches Magnetic level gauges OPERATING PRINCIPLE The operation of the magnetic level gauge is based on some elementary physical

More information

Norval Pressure regulator

Norval Pressure regulator Norval Pressure regulator NORVAL Classification and Field of Application The NORVAL is a downstream pressure regulator, self actuated, spring loaded for medium and low pressure applications. It is suitable

More information

L21S/SR/ST Glass Level Gauges

L21S/SR/ST Glass Level Gauges L21S/SR/ST Glass Level Gauges Doc. no.: 150, en_cat_l21s/sr/st, 12/2014 Type of code Example: L21ST/1450/AANSI 3/4 150Lb RF/Large chamber Code 1 Basic type L21 2 Type of gauge S Tubular level gauge SR

More information

Differential pressure and flow controller (PN 16) AVPQ - return mounting, adjustable setting

Differential pressure and flow controller (PN 16) AVPQ - return mounting, adjustable setting Data sheet Differential pressure and flow controller (PN 16) AVPQ - return mounting, adjustable setting Description AVPQ is a self-acting differential pressure and flow controller primarily for use in

More information

HERZ - Compact Flow Controller with

HERZ - Compact Flow Controller with HERZ - Compact Flow Controller with Integrated Control Valve Data sheet for flanged compact PIBCV PN 16, Issue 0616 Dimensions in mm min. 200 mm control valve cone valve seat H flow controller cone actuator

More information

Materials : Carbon steel ASTM A216 WCB

Materials : Carbon steel ASTM A216 WCB Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 400 ( NPS 2" to 16" ) Flanges R.F. Class 150 (PN20) - 29 C + 425 C Max Pressure : 20 Bars Specifications : Removable stainless

More information

MULTIFUNCTIONAL CONTROL FOR GAS BURNING APPLIANCE

MULTIFUNCTIONAL CONTROL FOR GAS BURNING APPLIANCE SIT Group SIT -3- SIGMA MULTIFUNCTIONAL CONTROL FOR GAS BURNING APPLIANCE 9.955. Subject to change without notice Application Domestic gas appliances: central heating boilers, combi boilers, instantaneous

More information

Installation, commissioning and servicing instructions

Installation, commissioning and servicing instructions 488.03 www.reece.com.au Pressure reducing s Installation, commissioning and servicing instructions Function Pressure reducing s are installed in residential water systems to reduce and stabilise inlet

More information

VZL valve - 2/3/4-way

VZL valve - 2/3/4-way VZ valve - 2/3/4-way Description Stem extension plug VZ 2 VZ 3 VZ 4 VZ valves provide a high quality, cost effective solution for the control of hot and/or chilled water for fan coil units, small reheaters,

More information

Fuel Filters DN15 DN25. elektrogas.com DE

Fuel Filters DN15 DN25. elektrogas.com DE FF Fuel Filters DN15 DN25 elektrogas.com DE180 0914 FF Fuel Filters Contents Description.. 2 Features.. 2 Functioning and application. 3 Accessories and optionals 4 Technical specifications 4 Gas flow

More information

Si C132. Safety valves for pressure relief in accordance to PED, DIN/EN and ASME. Engineering GREAT Solutions

Si C132. Safety valves for pressure relief in accordance to PED, DIN/EN and ASME. Engineering GREAT Solutions Safety valves for pressure relief in accordance to PED, DIN/EN and ASME Engineering GREAT Solutions Si C132 Features The universal compact safety valve > 3 body seat sizes for appropriate size selection

More information

Pressure reducing valves Series DRV/DRVM - DRVN/DRVMN

Pressure reducing valves Series DRV/DRVM - DRVN/DRVMN Pressure reducing valves Series DRV/DRVM - DRVN/DRVMN Main features Pressure reducing valves serve to reduce the pressure of the fluid downstream and to keep it at a constant level by varying its pressure

More information