Safety Data Sheet. 1. Chemical product and company identification. 2. Hazard identification. Issue date: 2010/06/18 Revised date:2017/11/10

Transcription

1 1/6 Safety Data Sheet 1. Chemical product and company identification Product name Company : : Mipox Corporation Issue date: 2010/06/18 Revised date: Address : 8566 Nishiide, Oizumi-cho, Hokuto-shi, Yamanashi Division Japan : Technical Dept. Telephone number : FAX number : SDS number : SD-0626E 2. Hazard identification GHS Classification Physical hazards Explosives Flammable gases Flammable aerosols Oxidizing gases Gases under pressure Flammable liquids Flammable solids Self-reactive substances and mixtures Pyrophoric liquids Pyrophoric solids Self-heating substances and mixtures Substances and mixtures, which in contact with water, emit flammable gases Oxidizing liquids Oxidizing solids Organic peroxides Corrosive to metals Health hazards Acute toxicity (Oral) Acute toxicity (Dermal)

2 2/6 Acute toxicity (Gases) Acute toxicity (Vapours) Acute toxicity (Dusts) Acute toxicity (Mists) Skin corrosion / irritation Serious eye damage / eye irritation Respiratory sensitization Skin sensitization Germ cell mutagenicity Carcinogenicity Reproductive toxicity Specific target organ toxicity Single exposure Specific target organ toxicity Repeated exposure Aspiration hazards Environmental hazards Hazardous to the acute aquatic environment Hazardous to the chronic aquatic environment GHS label elements Pictograms or hazard symbols : No Symbol Signal words : Not applicable Hazard statements : May be ignited by heat, sparks or flames. Precautionary statements : Safety measures.wash hand thoroughly after handling. First-aid measures If skin irritation occurs, get medical advice / attention. If in eyes, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/ attention. If swallowed, call a doctor/physician if you feel unwell. If inhaled vapours /mists, call a doctor/ physician if you

3 3/6 feel unwell. Storage Avoid direct sunlight. Disposal Disposal of this product must be in compliance with the laws, requirements and regulations for environmental protection, which are applicable to this product in the user s country and/or state. 3. Composition / information on ingredients Substance or mixture : Mixture Ingredient % CAS RN Aluminum oxide ~5% Polyurethane ~85% N/A Polyethylene terephthalate ~5% Polyacrylic ester ~5% N/A 4. First-aid measures Inhalation Skin Eye Ingestion 5. Fire-fighting measures Suitable extinguishing media Unsuitable extinguishing media Specific hazards during fire Specific fire-fighting Protection for fire-fighters : Remove victim to fresh air and keep at rest. Get medical advice / attention if you feel unwell. : Wash with plenty soap and water. If skin irritation occurs, get medical advice / attention. : Rinse cautiously with water for several minutes. If eye irritation persists, get medical advice / attention. : If you feel unwell, get medical advice / attention. : Water spray, dry chemical, foam, carbon dioxide : May produce hazardous gas by combustion or pyrolysis. : Keep away from sources of ignition and use appropriate extinguishing media. Fight fire from upwind position if possible. : Use goggles in combination with dust mask, and another protection as appropriate to situation.

4 4/6 6. Accidental release measures Personal precautions : Not dangerous. Environmental precautions : Not dangerous Methods and materials for : Sweep up for disposal. containment and cleaning up Precautions of secondary accident : Remove sources of ignition 7. Handling and storage Handling Technical measures : Protect from physical damage. Local ventilation / : Handle in well-ventilated areas. general ventilation Precautions for safe handling : None Storage Conditions for suitable storage : Avoid direct sunlight. Store in dark and well-ventilated place. Incompatible substances Safe vessels and packaging materials 8. Exposure controls / personal protection Limit value ACGIH(TLV) : No established Engineering measures : When vapors/fumes mists is occurred, use local ventilation. Personal protective equipment : In case of usual handling, personal protective equipment is not needed. Respirator protection : Dust mask Hand protection : Rubber gloves Eye protection : Safety glasses Skin and body protection : Full-body suit Hygiene measures 9. Physical and chemical properties Physical state, (Form, Color, etc) : Solid, Thin film, White Odour : Odourless ph : Not applicable Melting point / freezing point Polyethylene terephthalate;260 (Base film)

5 5/6 Boiling point Flash point Explosive limits Vapour pressure Vapour density Density Solubility Water solubility Solvent solubility Partition coefficient: n-octanol/water Auto-ignition temperature Decomposition temperature 10. Stability and reactivity Stability Possibility of hazardous reactions Conditions to Avoid Incompatible materials Hazardous decomposition products 11. Toxicological information Acute toxicity (Oral) Acute toxicity (Dermal) Skin corrosion / irritation Serious eye damage / irritation Respiratory or skin sensitization Germ cell mutagenicity Carcinogenicity Reproductive toxicity STOT - single exposure STOT repeated exposure Aspiration hazard 12. Ecological information Toxicity Persistence / degradability Bioaccumulative potential Mobility in soil : Insoluble Polyethylene terephthalate;575 (Base film) : Stable in general : None : None

6 6/6 13. Disposal considerations Disposal methods : Disposal of this product must be in compliance with the laws, requirements and regulations for environmental protection, which are applicable to this product in the user s country and/or state. 14. Transport information UN Number : Not applicable UN Class : Not applicable Specific precautions and condition for : Ensure containers without breakage or leakage. transport Ensure containers tightly fixed. 15. Regulatory information Follow all regulations in your country or region Chemical Inventories ENCS(Japan) TSCA(USA) EINECS(EU) AICS(Australia) DSL(Canada) ECL(Korea) PICCS(Philippines) Mipox Corporation is not able to check up the regulatory information in regard to the substances in your country or region, therefore, we request this matter would be filled by your responsibility. 16. Other information To the best of the manufacturer's knowledge, the information contained herein is accurate. However, neither the manufacturer, nor any of its affiliates, make any representations or warranties (expressed or implied), nor assumes any liability (including liability for any direct, incidental, consequential, or other damages) with respect to the accuracy or completeness of the information contained herein. Such information may be (without limitation) invalid if the specified material is used in combination with another, in a particular process, or under unusual conditions. Determination of suitability of any material for any given purpose is the sole responsibility of the user who assumes all risk and responsibility therefore. All materials may present unknown hazards and should be used with appropriate caution. The manufacturer cannot and dose not guarantee that the hazards described herein are the only ones that exist.