VSF3114 VSF3138 VSF3121 VSF3121/34

Size: px
Start display at page:

Download "VSF3114 VSF3138 VSF3121 VSF3121/34"

Transcription

1 Strada dei Boschi, Villasanta (MB) Italia tel VSF3114 VSF3138 VSF3121 VSF3121/34 Stainless steel AISI 316L relief valves, suitable for compressed air, gas and liquid FEATURES Relief valve for pressure up to 50 bar (725 psi). Inlet and outlet connections 1/4 F, 3/8 F, 1/2 F and 3/4 F. Welded flange connections EN or ASME available on request. The relief valve opens when the inlet pressure increases above the set point initially regulated by the adjusting screw and it closes when the pressure goes down under the set point. Upstream pressure set point is controlled by a rubber diaphragm up to 15 bar (217 psi), by a piston for greater pressure. Available the ATEX version Brand II2GDcIICX. For use in potentially explosive atmospheres zones: 1, 21, 2, 22 (not in mines and zone 0). The product complies with the directive 97/23/CE PED.

2 SPECIFICATIONS Diaphragm relief valve weight: ~1,4 kg / ~3,09 lb (VSF3114 and VSF 3138), ~2,1 kg / ~4,63 lb (VSF3121 and VSF 3121/34) Piston relief valve weight: ~1.6 kg / ~3,53 lb (VSF3114 and VSF 3138), ~2.4 kg / ~5,29 lb (VSF3121 and VSF 3121/34) Working temperature: -20 C +60 C (-4 F +140 F) for standard version Degree of protection: IP25 MATERIALS Body and bonnet: stainless steel AISI 316L Internal parts: stainless steel AISI 316L Adjusting spring: AISI 302 or AISI316, not in contact with the fluid O-Ring: FPM (other compounds available on request) Main valve gasket: FPM (for inlet pressure up to 30 bar / 435 psi) PUR (for inlet pressure greater than 30 bar / 435 psi) Other compounds available on request Diaphragm: NBR + PTFE (PTFE in contact with the fluid) Stainless steel AISI 316L diaphragm available on request Piston: stainless steel AISI 316L ACCESSORIES Panel mounting ring-nut: P (VSF3114 e VSF3138), P (VSF3121 e VSF3121/34) Wall mounting bracket and ring-nut: M13302 (VSF3114 e VSF3138), M13304 (VSF3121 e VSF3121/34) Pre-set version: factory set relief pressure Dome loaded version: relief pressure to be controlled by a pilot pressure Fixed relief pressure: adjusting screw locked by a cap nut SPARE PARTS Complete kit: main valve, diaphragm and o-rings Copyright ID Insert Deal S.r.l. - All rights reserved 2

3 inlet pressure [bar] inlet pressure [bar] inlet pressure [bar] flow charts 4 3,5 3 2,5 2 1,5 1 0,5 0 VSF3121-VSF3121/34 - Pout 0,2 1,5 bar - Aria/Air Flow rate [Nm^3/h] VSF3121-VSF3121/34 - Pout 0,3 3 bar - Aria/Air Flow rate [Nm^3/h] VSF3121-VSF3121/34 - Pout 0,8 8 bar - Aria/Air Flow rate [Nm^3/h] Copyright ID Insert Deal S.r.l. - All rights reserved 3

4 available model types Valvole di sfioro per media pressione Relief valves for medium pressure Valvole di sfioro per media pressione in acciaio inox 316L idonee per aria compressa e gas tecnici Relief valves for medium pressure made of stainless steel suitable for compressed air and technical gases Corpo e campana da lavorazione di barra/ Body by machining bar TYPE P. SFIORO Set pressure bar CONNECTION IN CONNECTION OUT Copyright ID Insert Deal S.r.l. - All rights reserved 4 CODE MEDIUM VSF3114 VSF 3114 A 0,2-1,5 G 1/4-F G 1/4-F S33#N Liquid VSF 3114 B 0,3-3 G 1/4-F G 1/4-F S33#N Liquid VSF 3114 C 0,8-8 G 1/4-F G 1/4-F S33#N Liquid VSF 3114 E 1,5-15 G 1/4-F G 1/4-F S33#N Liquid VSF 3114 G 3-30 G 1/4-F G 1/4-F S33#N Liquid VSF 3114 L 5-50 G 1/4-F G 1/4-F S33#N Liquid VSF3138 VSF 3138 A 0,2-1,5 G 3/8-F G 3/8-F S33#L Liquid VSF 3138 B 0,3-3 G 3/8-F G 3/8-F S33#L Liquid VSF 3138 C 0,8-8 G 3/8-F G 3/8-F S33#L Liquid VSF 3138 E 1,5-15 G 3/8-F G 3/8-F S33#L Liquid VSF 3138 G 3-30 G 3/8-F G 3/8-F S33#L Liquid VSF 3138 L 5-50 G 3/8-F G 3/8-F S33#L Liquid Aria - N2 - He - Ar - H2 - C3H8 - CH4 C ATTACCHI DIVERSI DA STANDARD / CONNECTION DIFFERENT FROM STANDARD Attacchi entrata/uscita NPT / Inlet/outlet connections NPT Attacchi flangiati / Connections with flanges ESECUZIONI DIVERSE DA STANDARD / EXECUTIONS DIFFERENT FROM STANDARD Pressione di sfioro pretarata, sopra 1 bar / Pre-set relieving pressure, set point greater than 1 bar Pressione di sfioro tarata fissa, sopra 1 bar / Fixed relieving pressure, set point greater than 1 bar O-ring diversi da standard - EPDM / O-ring different from standard - EPDM O-ring secondo FDA / O-ring according to FDA Stampigliatura su specifica del cliente / Not standard branding Versione ATEX / ATEX version Temperature diverse da standard / Special temperature range Sgrassato uso / Degreased for ACCESSORI / ACCESSORIES Ghiera P / Ring nut P Kit staffa + ghiera M13302 / Kit bracket + Ring nut M13302

5 available model types Valvole di sfioro per media pressione Relief valves for medium pressure Valvole di sfioro per media pressione in acciaio inox 316L idonee per aria compressa e gas tecnici Relief valves for medium pressure made of stainless steel suitable for compressed air and technical gases Corpo e campana da lavorazione di barra/ Body by machining bar TYPE P. SFIORO Set pressure bar CONNECTION IN CONNECTION OUT CODE MEDIUM VSF3121 VSF 3121 A 0,2-1,5 G 1/2-F G 1/2-F S33#P Liquid VSF 3121 B 0,3-3 G 1/2-F G 1/2-F S33#P Liquid VSF 3121 C 0,8-8 G 1/2-F G 1/2-F S33#P Liquid VSF 3121 E 1,5-15 G 1/2-F G 1/2-F S33#P Liquid VSF 3121 G 3-30 G 1/2-F G 1/2-F S33#P Liquid VSF 3121 L 5-50 G 1/2-F G 1/2-F S33#P Liquid Aria - N2 - He - Ar - H2 - C3H8 - CH4 C ATTACCHI DIVERSI DA STANDARD / CONNECTION DIFFERENT FROM STANDARD Attacchi entrata/uscita NPT / Inlet/outlet connections NPT Attacchi flangiati / Connections with flanges ESECUZIONI DIVERSE DA STANDARD / EXECUTIONS DIFFERENT FROM STANDARD Pressione di sfioro pretarata, sopra 1 bar / Pre-set relieving pressure, set point greater than 1 bar Pressione di sfioro tarata fissa, sopra 1 bar / Fixed relieving pressure, set point greater than 1 bar O-ring diversi da standard - EPDM / O-ring different from standard - EPDM O-ring secondo FDA / O-ring according to FDA Stampigliatura su specifica del cliente / Not standard branding Versione ATEX / ATEX version Temperature diverse da standard / Special temperature range Sgrassato uso / Degreased for ACCESSORI / ACCESSORIES Ghiera P / Ring nut P Kit staffa + ghiera M13304 / Kit bracket + Ring nut M13304 Copyright ID Insert Deal S.r.l. - All rights reserved 5

6 generating the product code Valvola di sfioro da barra Inox AA BB CC D E FF AA Attacchi / Connections H0 VSF3121 1/2"NPT-F L0 VSF3138 G 3/8-F N0 VSF3114 G 1/4-F P0 VSF3121 G 1/2-F Q0 VSF3121 G 3/4-F V0 VSF3114 1/4" NPT-F W0 VSF3138 3/8 NPT-F X0 VSF3121 3/4"NPT-F BB Intervallo uscita / Outlet range A0 0,2-1,5 bar B0 0,3-3 bar D0 0,8-8 bar E0 1,5-15 bar F bar G bar CC Tipologia di fluido / Fluid type EPDM 99 FPM D Pilotato / Pilot operated N Non pilotato P Pilotato E Marchiato / Marked I ID Z Dir ATEX 94/9 CE FF Accessori / Accessories 00 Nessun accessorio CODE COMPOSITION EXAMPLE S33# N0 D0 98 N I 00 S33#: Standard stainless steel relief valves N0: Connections G 1/4 - F D0: Relief pressure range 0,8-8 bar (11,6 116 psi) 98: EPDM gaskets N: Not dome loaded I: Insert Deal 00: No accessories Copyright ID Insert Deal S.r.l. - All rights reserved 6

7 technical drawings (all dimensions in mm) Bracket and Ring-Nut to be ordered separately, Kit order number: M13302 MODEL H L1 L2 Diaphragm ( /0.3 3/0.8 8/1.5 15) ~ Piston (3 30/5 50) ~ M45x TYPE VSF3114 1/4" GF VSF3114 1/4" NPTF VSF3138 3/8" GF VSF3138 3/8" NPTF Ring-Nut P35017 IN/OUT G 1/4-F 1/4" NPT-F G 3/8-F 3/8" NPT-F Bracket P36057 IN OUT 37,5 L1 L2 H 6, Copyright ID Insert Deal S.r.l. - All rights reserved 7

8 technical drawings (all dimensions in mm) Bracket to be ordered separately, kit order number: M13304 TYPE IN/OUT VSF3121 1/2"GF G 1/2-F VSF3121 1/2"NPTF 1/2"NPT-F 63 VSF3121 3/4"GF G 3/4-F VSF3121 3/4"NPTF 3/4"NPT-F M50x1.5 43,5 Bracket P36061 Ring-Nut P IN OUT ~166 6, Copyright ID Insert Deal S.r.l. - All rights reserved 8

9 ID Insert Deal Srl Strada dei Boschi, Villasanta (MB) Italia tel ID Insert Deal si riserva il diritto di cambiare le specifiche del prodotto senza preavviso. ID Insert Deal reserves the right to change and/or modify product specifications without prior notice. Insert Deal non si assume alcuna responsabilità per la scelta, uso e manutenzione di qualsiasi prodotto. La responsabilità per l idonea scelta, uso e manutenzione di qualsiasi prodotto ID rimane interamente a carico dell acquirente. Insert Deal does not assume responsibility for selection, use and maintenance of any products. Responsibility for proper selection, use and maintenance of any ID products remains entirely to the purchaser. Riproduzione vietata. Tutti i diritti riservati; nessuna parte del presente documento può essere riprodotta senza autorizzazione di ID Insert Deal Srl. Reproduction forbidden. All rights reserved; the hereby document can t be reproduced, also partially, without the authorization of ID Insert Deal Srl. RELIEF VALVE_S33(VSF3114-VSF3138-VSF3121)_EN_00 Azienda con sistema di gestione qualità certificato. certificato N Company with certificated quality management system. certificate N Copyright ID Insert Deal S.r.l. - All rights reserved 9

Medium pressure relief valve AISI 316L Stainless steel AISI 316L relief valves, suitable for compressed air, gas and liquid

Medium pressure relief valve AISI 316L Stainless steel AISI 316L relief valves, suitable for compressed air, gas and liquid Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 30 2035 info@idinsertdeal.com www.idinsertdeal.com Medium pressure relief valve AISI 316L Stainless steel AISI 316L relief valves, suitable

More information

VSF3133-VSF31100-VSF31200

VSF3133-VSF31100-VSF31200 Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 30 2035 info@idinsertdeal.com www.idinsertdeal.com VSF3133-VSF31100-VSF31200 Stainless steel AISI 316L high pressure relief valves, suitable

More information

R114-R138-R112-R121. Brass pressure regulator, for compressed air, gas and liquid

R114-R138-R112-R121. Brass pressure regulator, for compressed air, gas and liquid Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R114-R138-R112-R121 Brass pressure regulator, for compressed air, gas and liquid FEATURES

More information

R128. Brass pressure regulator, for compressed air, gas and liquids FEATURES

R128. Brass pressure regulator, for compressed air, gas and liquids FEATURES Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R128 Brass pressure regulator, for compressed air, gas and liquids FEATURES Pressure regulator

More information

R12MD R38MD. Modular regulators, suitable for compressed air FEAURES

R12MD R38MD. Modular regulators, suitable for compressed air FEAURES Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R12MD R38MD Modular regulators, suitable for compressed air FEAURES Diaphragm pressure

More information

R123 R123/34 brass. Brass pressure regulator, for compressed air, gas and liquid

R123 R123/34 brass. Brass pressure regulator, for compressed air, gas and liquid Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R123 R123/34 brass Brass pressure regulator, for compressed air, gas and liquid FEATURES

More information

3P0R2. Stainless steel AISI 316L dome loaded pressure regulator, for compressed air, gas and liquid FEATURES

3P0R2. Stainless steel AISI 316L dome loaded pressure regulator, for compressed air, gas and liquid FEATURES Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com 3P0R2 Stainless steel AISI 316L dome loaded pressure regulator, for compressed air, gas

More information

R14 MC R18 MC Aluminium

R14 MC R18 MC Aluminium Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R14 MC R18 MC Aluminium Aluminium micro pressure regulator, for compressed air, gas and

More information

R10MD-R34MD-R11MDL-R15MDL

R10MD-R34MD-R11MDL-R15MDL Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R10MD-R34MD-R11MDL-R15MDL Modular pressure regulator, suitable for compressed air FEATURES

More information

R114-R138-R112-R121. Brass pressure regulator, for compressed air, gas and liquid

R114-R138-R112-R121. Brass pressure regulator, for compressed air, gas and liquid Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R114-R138-R112-R121 Brass pressure regulator, for compressed air, gas and liquid FEATURES

More information

R3300. Stainless steel AISI 316L high pressure regulator for compressed air, gas and liquid

R3300. Stainless steel AISI 316L high pressure regulator for compressed air, gas and liquid Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R3300 Stainless steel AISI 316L high pressure regulator for compressed air, gas and liquid

More information

R126/DN100-R126/DN80 LL

R126/DN100-R126/DN80 LL Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R126/DN100-R126/DN80 LL Aluminium pressure regulator, for non corrosive gas FEATURES Pressure

More information

R128. Brass pressure regulator, for compressed air, gas and liquids FEATURES

R128. Brass pressure regulator, for compressed air, gas and liquids FEATURES Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R128 Brass pressure regulator, for compressed air, gas and liquids FEATURES Pressure regulator

More information

R Stainless steel AISI 316L high pressure regulator, suitable for compressed air, gas and liquid

R Stainless steel AISI 316L high pressure regulator, suitable for compressed air, gas and liquid Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R31000 Stainless steel AISI 316L high pressure regulator, suitable for compressed air,

More information

R3133. Stainless steel AISI 316L high pressure regulator, suitable for compressed air, gas and liquid

R3133. Stainless steel AISI 316L high pressure regulator, suitable for compressed air, gas and liquid Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R3133 Stainless steel AISI 316L high pressure regulator, suitable for compressed air, gas

More information

R123 R123/34 brass. Brass pressure regulator, for compressed air, gas and liquid

R123 R123/34 brass. Brass pressure regulator, for compressed air, gas and liquid R123 R123/34 brass Brass pressure regulator, for compressed air, gas and liquid FEATURES Pressure regulator for inlet pressure up to 50 bar (725 psi) in the standard version. Connection ports. R123 1 -F

More information

FR12MD FR38MD. Modular filter-regulators, suitable for compressed air FEATURES. Filter-regulator for inlet pressure up to 30 bar (435 psi).

FR12MD FR38MD. Modular filter-regulators, suitable for compressed air FEATURES. Filter-regulator for inlet pressure up to 30 bar (435 psi). Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com FR12MD FR38MD Modular filter-regulators, suitable for compressed air FEATURES Filter-regulator

More information

R133. Brass high pressure regulator, suitable for compressed air, gas and liquid

R133. Brass high pressure regulator, suitable for compressed air, gas and liquid Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R133 Brass high pressure regulator, suitable for compressed air, gas and liquid FEATURES

More information

R128. Brass pressure regulator, for compressed air, gas and liquids FEATURES

R128. Brass pressure regulator, for compressed air, gas and liquids FEATURES R128 Brass pressure regulator, for compressed air, gas and liquids FEATURES Pressure regulator for inlet pressure up to 30 bar (435 psi) in the standard version. Connections 2 -F by flanges screwed to

More information

QM Dual inlet modular decompression unit FEATURES

QM Dual inlet modular decompression unit FEATURES Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com QM 1100 Dual inlet modular decompression unit FEATURES Single stage decompression unit

More information

FR12MD FR38MD. Modular filter-regulators, suitable for compressed air FEATURES. Filter-regulator for inlet pressure up to 30 bar (435 psi).

FR12MD FR38MD. Modular filter-regulators, suitable for compressed air FEATURES. Filter-regulator for inlet pressure up to 30 bar (435 psi). FR12MD FR38MD Modular filter-regulators, suitable for compressed air FEATURES Filter-regulator for inlet pressure up to 30 bar (435 psi). Inlet and outlet connections 1/2 F and 3/8 F in the body. Outlet

More information

Flexible connections FEATURES. Flexible low pressure and high pressure (220 bar/ 3190 psi) connections.

Flexible connections FEATURES. Flexible low pressure and high pressure (220 bar/ 3190 psi) connections. Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com VS Flexible connections FEATURES Flexible low pressure and high pressure (220 bar/ 3190

More information

R133 HELYON. Brass high pressure regulator, suitable for compressed air, gas and liquid

R133 HELYON. Brass high pressure regulator, suitable for compressed air, gas and liquid R133 Brass high pressure regulator, suitable for compressed air, gas and liquid HELYON 5 Chemin du Jubin 6957 DARDILLY Tél. +33 () 7 5 16 7 - Fax +33 () 7 5 16 71 FEATURES High pressure regulator for cylinder

More information

R300 HELYON. Brass high pressure regulator, for compressed air, gas and liquids

R300 HELYON. Brass high pressure regulator, for compressed air, gas and liquids HELYON 5 Chemin du Jubin 69570 DARDILLY Tél. +33 (0)4 72 52 16 70 - Fax +33 (0)4 72 52 16 71 R300 Brass high pressure regulator, for compressed air, gas and liquids FEATURES Pressure regulator for inlet

More information

NEWS 66. VALVES & AIR SERVICE UNITS STEEL LINE Series

NEWS 66. VALVES & AIR SERVICE UNITS STEEL LINE Series NEWS 66 Components for Pneumatic Automation VALVES & AIR SERVICE UNITS STEEL LINE Series www.pneumaxspa.com Valves General The new Steel line valve series was created and developed specifically for the

More information

excellence of Italian engineering Field adjustable PRESSURE RELIEF VALVES

excellence of Italian engineering Field adjustable PRESSURE RELIEF VALVES excellence of Italian engineering Field adjustable PRESSURE RELIEF VALVES excellence of Italian engineering OUR MISSION: We started in 1960 as instrumentation manufacturers and we have increasingly specialized

More information

FILTER, REGULATOR AND FILTER/REGULATOR Stainless Steel 316L Compact 1/4, High Flow 1/4-1/2

FILTER, REGULATOR AND FILTER/REGULATOR Stainless Steel 316L Compact 1/4, High Flow 1/4-1/2 FILTER, REGULATOR AND FILTER/REGULATOR Stainless Steel L Compact /, High Flow / - / Air service equipment Series FEATURES Stainless Steel filter, regulator and filter regulator intended for corrosive environment

More information

TECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS

TECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS TECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS THE COMPANY ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and

More information

TECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS

TECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS TECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution

More information

Microregulator 039 1/8-1/4

Microregulator 039 1/8-1/4 09/11/15 TECH DATA SHEET 675 Microregulator 1/8-1/4 Sensitive high performance model, high stability with low load losses and big flow rate. Downstream overpressures quickly eliminated. Can be wall mounted

More information

VALFONTA INSTRUCTIONS: OPERATION AND INSTALLATION PRESSURE REDUCING VALVE MODEL PRV44

VALFONTA INSTRUCTIONS: OPERATION AND INSTALLATION PRESSURE REDUCING VALVE MODEL PRV44 INSTRUCTIONS: OPERATION AND INSTALLATION PRESSURE REDUCING VALVE MODEL PRV44 Pressure Reducing Valve PRV44 - Operation and Installation - 1 - manual PRV44-16-ENG JULY 2016 INDEX PAGE 1 IDENTIFICATION PLATE

More information

Flanged direct acting pressure reducing valves with piston

Flanged direct acting pressure reducing valves with piston SALES SERVICE +358 (0)17 262 3555 info@econosto.fi Flanged direct acting pressure The flanged, direct acting, pressure reducing valves, with piston, in the series F15 are suitable for reducing and controlling

More information

VALFONTA INSTRUCTIONS: OPERATION AND INSTALLATION PRESSURE REDUCING VALVE MODEL M2

VALFONTA INSTRUCTIONS: OPERATION AND INSTALLATION PRESSURE REDUCING VALVE MODEL M2 INSTRUCTIONS: OPERATION AND INSTALLATION PRESSURE REDUCING VALVE MODEL M2 Pressure Reducing Valve M2 - Operation and Installation - 1 - M2-13E-ENG FEBRUARY 2017 ÍNDICE PÁGINA 1 IDENTIFICATION PLATE LEGEND

More information

CASH VALVE TYPE KP BACK PRESSURE VALVES

CASH VALVE TYPE KP BACK PRESSURE VALVES A high capacity pilot operated back pressure valve that offers accurate control and dependable protection against overpressure conditions FEATURES Automatically maintains maximum pressure in a vessel or

More information

valvole ad azionamento pneumatico

valvole ad azionamento pneumatico Valvole a spola /-5/-5/ con attacchi filettati G/8 -G/4 /-5/-5/ spool valves with G/8 -G/4 threaded ports Montaggio in linea, su collettori multipli o su basi manifold (pag. 9-0) Installation in-line,

More information

Si C132. Safety valves for pressure relief in accordance to PED, DIN/EN and ASME. Engineering GREAT Solutions

Si C132. Safety valves for pressure relief in accordance to PED, DIN/EN and ASME. Engineering GREAT Solutions Safety valves for pressure relief in accordance to PED, DIN/EN and ASME Engineering GREAT Solutions Si C132 Features The universal compact safety valve > 3 body seat sizes for appropriate size selection

More information

Premium Series. Economical Price & Reliable Performance. High Quality. Rust-Resistant. Long Life. Tamper-Resistant locking Screw.

Premium Series. Economical Price & Reliable Performance. High Quality. Rust-Resistant. Long Life. Tamper-Resistant locking Screw. Premium Series High Quality Forged Brass Body Rust-Resistant Nickel Plated Finish Long Life Corrosion Resistant Valve Seat Economical Price & Reliable Performance Tamper-Resistant locking Screw Reduces

More information

Relief Valves. Relief Valves. International, Inc. Company ACIRCOR. RS Differential NB 9.5mm. RVA In-line Differential NB 6 to 19mm

Relief Valves. Relief Valves. International, Inc. Company ACIRCOR. RS Differential NB 9.5mm. RVA In-line Differential NB 6 to 19mm s s RS Differential NB 9.5mm RVA In-line Differential NB 6 to 19mm RV Direct Acting NB up to 9mm LPR Low Pressure Differential NB 8mm We design, machine, build and test all our products on one site in

More information

Spectrotec. Pressure regulators for acetylene

Spectrotec. Pressure regulators for acetylene spectro tec Spectrotec Pressure regulators Regulator BT61 ca. 166 1/8"-NPT 83 113 48 1/4"-NPT 60 1/4"-NPT 33 105 Pressure regulator BT61 AC Specially For flow rates up to 8 m³/h acetylene Pressure regulator

More information

Precision and Instrument Regulators 1/4" port size

Precision and Instrument Regulators 1/4 port size Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38

More information

JR Series. Gas Pressure Reducing Valve GAS PRESSURE REDUCING VALVE

JR Series. Gas Pressure Reducing Valve GAS PRESSURE REDUCING VALVE JR Series Gas Pressure Reducing Valve GAS PRESSURE REDUCING VALVE The LowFlow JR Series line of high pressure regulators have the ability to handle very high pressures and very low flows. These valves

More information

Pressure Reducing Valve DMV 755

Pressure Reducing Valve DMV 755 Pressure Reducing Valve DMV 755 Nominal size DN 10 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 1 to 9 bar control valve for reliable reduction of system pressures to

More information

Type ACE97. Introduction. Installation. P.E.D. Categories. Specifications. Overpressure Protection. Installation Guide English May 2002

Type ACE97. Introduction. Installation. P.E.D. Categories. Specifications. Overpressure Protection. Installation Guide English May 2002 Installation Guide English May 2002 Type ACE97 Introduction This installation guide provides instructions for installation, startup, and adjustment. To receive a copy of the instruction manual, contact

More information

Serie 06-M6. Swing wafer check valve. made in. Application fields. Check valves E U R O P E WATER CONDITIONING INDUSTRY

Serie 06-M6. Swing wafer check valve. made in. Application fields. Check valves E U R O P E WATER CONDITIONING INDUSTRY Swing wafer check valve BRANDONI made in E U R O P E Application fields WATER CONDITIONING INDUSTRY HEATING 38 www.brandoni.it The valves in series 06 are swing wafer check valves, manufactured in accordance

More information

INSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION

INSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION INSTALLATION INSTRUCTIONS CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION The CVS Controls 67CFR Filter regulator is a pressure reducing supply regulator typically used for pneumatic

More information

Ball Float Steam Trap UNA 43 PN 16/CL 125/JIS 10K UNA 46 PN 40/CL 150/CL 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6"

Ball Float Steam Trap UNA 43 PN 16/CL 125/JIS 10K UNA 46 PN 40/CL 150/CL 300/JIS 10K/JIS 20K DN 80, 100, 150, 3, 4, 6 Data Sheet 819584-00 Issue Date: 01/17 Ball Float Steam Trap UNA 43 PN 16/C 125/JIS 10K UNA 46 PN 40/C 150/C 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6" UNA 43 hl, UNA 46 hl UNA 43 v, UNA 46 v with

More information

ARI-SAFE-SN ANSI Safety valve ANSI - safety valve Semi Nozzle (ANSI )

ARI-SAFE-SN ANSI Safety valve ANSI - safety valve Semi Nozzle (ANSI ) ARI-SAFE-SN ANSI Safety valve ANSI - safety valve Semi Nozzle (ANSI 150-300) ARI-SAFE-SN ANSI (Semi-Nozzle) ANSI-Safety Relief Valve Type-test approved acc. to ASME Code Section VIII-Division 1. UV-stamp

More information

Glass tube flowmeters Series 2000

Glass tube flowmeters Series 2000 Glass tube flowmeters Series 2000 Variable area flowmeter for low flows of liquids and gases Short mounting length and compact construction, especially indicated for control panels Easy installation. No

More information

Pilot Operated Pressure Reducing Valve

Pilot Operated Pressure Reducing Valve OPTIONS: USE: Pilot Operated Pressure Reducing Valve Steam & Compressed Air PRV 37 (DN15-DN50) DESCRIPTION The ADCA PRV37 pilot operated pressure reducing valves are designed for use on steam, compressed

More information

ALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8" and 1/4" PTF Port Sizes. Air line equipment.

ALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8 and 1/4 PTF Port Sizes. Air line equipment. Air line equipment R Miniature Brass Body Regulator Water and Compressed Air Service 1/" and 1/" PTF Port Sizes Compact design, corrosion resistant construction Brass body with choice of plastic or brass

More information

2 Overview. SITRANS P measuring instruments for pressure. Transmitters for gage and absolute pressure. Z series for gage pressure

2 Overview. SITRANS P measuring instruments for pressure. Transmitters for gage and absolute pressure. Z series for gage pressure Z series for gage pressure Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and electronics plate Process connection Electrical connection

More information

Ball Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300 DN 40, 50, 65

Ball Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300 DN 40, 50, 65 Data Sheet 819346-02 Issue Date: 05/17 Ball Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300, 50, 65 UNA 45hl MAX, UNA 46hl MAX, UNA 46Ahl MAX UNA 45v MAX with cover for mounting electrode

More information

Differential pressure

Differential pressure Differential pressure 9 Overview Page 200 VEGADIF 65 Page 202 Chemical seal Page 204 Accessory Page 208 199 VEGADIF For differential pressure, level and flow measurements Measuring principle The sensor

More information

Pressure relief valve DHV 712 DN 65-80: 0,5-10 bar, DN : 0,3-4 bar, DN 100: 0,5-6 bar

Pressure relief valve DHV 712 DN 65-80: 0,5-10 bar, DN : 0,3-4 bar, DN 100: 0,5-6 bar Pressure relief valve DHV 7 DN 5-80: 0,5-0 bar, DN 5-00: 0, - bar, DN 00: 0,5 - bar Advantage for high pressure stability reliable reduction of pressure peaks and pulsations pressure setting possible at

More information

Do you require maximum pressure stability in your gas supply?

Do you require maximum pressure stability in your gas supply? TECHNOLOGY FOR GASES Do you require maximum pressure stability in your gas supply? Rely on 40 years of experience in dome-loaded pressure regulation. Dynamic WITT regulators ensure a stable, adaptable

More information

Calibrated or locked versions available. TREATMENT > Series MD regulators GENERAL DATA. New

Calibrated or locked versions available. TREATMENT > Series MD regulators GENERAL DATA. New > Series MD regulators Series MD pressure regulators New Ports with interchangeable cartridges: threaded (1/8, 1/4, /8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm Versions: single,

More information

THE BP-301 SERIES. Operating and Service Manual. Series includes all variants of BP-301 (LF 0.1Cv / MF 0.5Cv)

THE BP-301 SERIES. Operating and Service Manual. Series includes all variants of BP-301 (LF 0.1Cv / MF 0.5Cv) THE BP-301 SERIES Operating and Service Manual Series includes all variants of BP-301 (LF 0.1Cv / MF 0.5Cv) Issue B October 2015 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation...

More information

Features BALL VALVES. Hercules - High pressure Stainless steel ball valve - high ciclicity. General features. Special execution on request.

Features BALL VALVES. Hercules - High pressure Stainless steel ball valve - high ciclicity. General features. Special execution on request. OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:

More information

Pressure Reducing Valve DMV 755 set range: 1,0-9,0 bar

Pressure Reducing Valve DMV 755 set range: 1,0-9,0 bar Pressure Reducing Valve DMV 755 set range:,0-9,0 bar Advantage pressure setting possible at any time, also during operation high reproducibility of the set pressure high level of operating safety and long

More information

Hydraulic Accumulators with Back-Up Nitrogen Bottles

Hydraulic Accumulators with Back-Up Nitrogen Bottles Hydraulic Accumulators with Back-Up Nitrogen Bottles 1. GENERAL To complete the accumulator range, HYDAC provides a variety of useful accessory products. They guarantee correct installation and optimum

More information

HIGH-PRESSURE RELIEF VALVES

HIGH-PRESSURE RELIEF VALVES HIGH-PRESSURE RELIEF VALVES H-9HP SERIES FEATURES n St.St. 316 Construction n MAWT up to 6 psi n Set Pressure from 5 psig to 6 psig ( 3.5 to 4 bar) n Identifying colored springs for each pressure range

More information

product range overview P.004 P.006 Switch over Boards Quality Standards Pressure Regulator Technology P.013 Technical Parameters

product range overview P.004 P.006 Switch over Boards Quality Standards Pressure Regulator Technology P.013 Technical Parameters supply and SWITCH OVER BOARDS table of contents product range overview P.4 technology overview P.6 -- Supply Boards P.6 -- Switch over Boards P.6 -- Quality Standards P.7 -- Pressure Regulator Technology

More information

SITRANS P measuring instruments for pressure

SITRANS P measuring instruments for pressure SITRANS P measuring instruments for pressure Z series for gage pressure Siemens AG 008 Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and

More information

MEASURING INSTRUMENTS - STRUMENTI PER MISURARE

MEASURING INSTRUMENTS - STRUMENTI PER MISURARE MEASURING INSTRUMENTS - STRUMENTI PER MISURARE SPECIAL PRESSURE GAUGE MN9 capsule pressure gauges DS 2.5 (63mm) PED 201/68/UE For measurement of low pressure and vacuum, for use on gas and dry air. 2.09.1

More information

1301 Series High-Pressure Regulators

1301 Series High-Pressure Regulators Instruction Manual Form 1111 Types 1301F and 1301G March 2013 1301 Series High-Pressure Regulators! WARNING Failure to follow these instructions or to properly install and maintain this equipment could

More information

Pressure Regulator B-95

Pressure Regulator B-95 Pressure Regulator B-95 TYPE B WATER & AIR TYPE B INTERIOR WATER & AIR B SERIES VALVES DESTRIPTION The Cash Valve Series B pressure reducing and regulating valves are single seated, spring loaded, direct

More information

THE HF-300 SERIES. Operating and Service Manual. Series includes all variants of HF-300/301

THE HF-300 SERIES. Operating and Service Manual. Series includes all variants of HF-300/301 THE HF-300 SERIES Operating and Service Manual Series includes all variants of HF-300/301 Issue A July 2015 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 3.1. Spring Loaded...

More information

Tank Blanketing Regulators

Tank Blanketing Regulators Tank Blanketing Regulators Low-Pressure Reducing Regulator Type BR Low-Pressure Relief Valve Type BS Description Tank blanketing, or padding, is the process and practice of covering a stored commodity,

More information

Compact Regulator. ARX20 Series. 2.0 MPa compatible, piston type compact regulator ARJ

Compact Regulator. ARX20 Series. 2.0 MPa compatible, piston type compact regulator ARJ Compact Regulator 2 Series 2. MPa compatible, piston type compact regulator V SR X AP1 Compatible with inlet supply pressure of 2. MPa Employs a knob shape for easy operation Compact type (face to face

More information

MEGR-1912 Instruction Manual

MEGR-1912 Instruction Manual MEGR-1912 PRESSURE REGULATOR Instruction Manual- Look Inside For: Description Installation Start-Up Maintenance Parts Ordering Parts List Marshall Excelsior Company Marshall, MI 49068 269-789-6700 FAX

More information

64 Series Pressure Reducing Regulators

64 Series Pressure Reducing Regulators Instruction Manual Form 1245 64 Series March 2006 64 Series Pressure Reducing Regulators W1943 Figure 1. 64 Series Regulator Introduction Scope of Manual This manual provides instructions for the installation,

More information

Product Manual. Description. Specifications. CVS Type 1301F and CVS Type 1301G Regulator. Introduction

Product Manual. Description. Specifications. CVS Type 1301F and CVS Type 1301G Regulator. Introduction Product Manual CVS Type 1301F and CVS Type 1301G Regulator Introduction This CVS Controls product manual includes instructions for the installation, adjustment, maintenance and parts ordering of the CVS

More information

756 Safety Relief Valves

756 Safety Relief Valves 756 S a fe t y R e l i e f Va l ve s INTRODUCTION 756 Safety Relief Valves The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both

More information

Glass tube flowmeters Series 2000 Variable area flowmeter for low flows of liquids and gases

Glass tube flowmeters Series 2000 Variable area flowmeter for low flows of liquids and gases Glass tube flowmeters Series 2000 Variable area flowmeter for low flows of liquids and gases Short mounting length and compact construction, especially indicated for control panels Easy installation. No

More information

Tank Blanketing Regulators

Tank Blanketing Regulators Tank Blanketing Regulators Low-Pressure Reducing Regulator Type BR Low-Pressure Relief Valve Type BS Description Tank blanketing, or padding, is the process and practice of covering a stored commodity,

More information

Instruction Manual. Standard Surge Eliminator. Standard X. Flushable X - X

Instruction Manual. Standard Surge Eliminator. Standard X. Flushable X - X Standard Surge Eliminator Standard 104052 - X Flushable 104053 - X - X Page 2 of 16 Issue: 2.3 Index Section 1.1 General Description 1.2 Operating Principle 1.3 Specification 1.4 Fitting Selection - Standard

More information

Regulating valves REG-SA and REG-SB

Regulating valves REG-SA and REG-SB MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG-SA and REG-SB REG-SA and REG-SB are angleway and straightway hand regulating valves, which act as normal stop valves in closed position.

More information

Pressure Equalising Valves Model , for Differential Pressure Gauges

Pressure Equalising Valves Model , for Differential Pressure Gauges Accessories Pressure Equalising Valves Model 910.25, for Differential Pressure Gauges WIKA Data Sheet AC 09.11 Applications T Isolating, pressure equalising as well as purging and air bleeding valves to

More information

THE BP-690 SERIES. Operating and Service Manual. Series includes all variants of BP-LF/MF-690/691

THE BP-690 SERIES. Operating and Service Manual. Series includes all variants of BP-LF/MF-690/691 THE BP-690 SERIES Operating and Service Manual Series includes all variants of BP-LF/MF-690/691 Issue B April 2015 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 4. Special

More information

R18 General purpose pressure regulators

R18 General purpose pressure regulators > > Port size: / & (ISO G, PTF) > > Can be installed at any point in the compressed air system without regard to accessibility pilot regulator can be installed in the most convenient location > > Accurate

More information

Gas Pressure Regulator HON 502

Gas Pressure Regulator HON 502 Gas Pressure Regulator HON 502 Product information serving the gas industry worldwide Gas Pressure regulator HON 502 Application, Characteristics, Technical Data Application for offtake stations in gas

More information

Regulating valves Type REG 6-65 Type REG-SS REFRIGERATION AND AIR CONDITIONING. Technical leaflet

Regulating valves Type REG 6-65 Type REG-SS REFRIGERATION AND AIR CONDITIONING. Technical leaflet Regulating valves Type REG 6-65 Type REG-SS 15-40 REFRIGERATION AND AIR CONDITIONING Technical leaflet Content Page Introduction........................................................................................3

More information

299H Series. Introduction. P.E.D. Categories. Specifications. Installation. Warning. Installation Guide English September 2012

299H Series. Introduction. P.E.D. Categories. Specifications. Installation. Warning. Installation Guide English September 2012 Installation Guide English September 2012 299H Series Introduction This Installation Guide provides instructions for installation, startup, and adjustment of 299H Series regulators. To receive a copy of

More information

THE MF-400 SERIES. Operating and Service Manual. Series includes all variants of MF-400/401

THE MF-400 SERIES. Operating and Service Manual. Series includes all variants of MF-400/401 THE MF-400 SERIES Operating and Service Manual Series includes all variants of MF-400/401 Issue A October 2013 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 4. Special

More information

JR Series. Gas Pressure Reducing Valves. a division of Jordan Valve GAS PRESSURE REDUCING VALVES

JR Series. Gas Pressure Reducing Valves. a division of Jordan Valve GAS PRESSURE REDUCING VALVES a division of Jordan Valve JR Series Gas Pressure Reducing Valves GAS PRESSURE REDUCING VALVES The LowFlow JR Series line of high pressure regulators have the ability to handle very high pressures and

More information

4/2 way Pneumatic Solenoid Valve

4/2 way Pneumatic Solenoid Valve 4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11

More information

R84G - Excelon Plus Modular System Pressure regulators

R84G - Excelon Plus Modular System Pressure regulators > Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Easy to read flush mounted integrated pressure gauge as

More information

Pressure & Flame Protection

Pressure & Flame Protection Pressure & Flame Protection Safety & Regulating Valves Safety & Regulating Valves Pressure Reducing Valves - These valves are installed where there is a requirement to reduce the pressure from one level

More information

A soft sealed atmospheric safety valve with large flow capacity and soft seat tightness for steam condenser and turbine applications

A soft sealed atmospheric safety valve with large flow capacity and soft seat tightness for steam condenser and turbine applications SAPAG A soft sealed atmospheric safety valve with large flow capacity and soft seat tightness for steam condenser and turbine applications Features The Sapag Series 1100 steam safety valve is used for

More information

BDT20 Safety process pressure gauge 100 & 160mm

BDT20 Safety process pressure gauge 100 & 160mm BDT20 Safety process pressure gauge 100 & 160mm Product description Badotherm pressure gauge model BDT20 is the solid front, safety pattern gauge according the highest class of the EN 837-1 / 9.7.2 and

More information

Solenoid valves, two-step on/off Type PMLX REFRIGERATION AND AIR CONDITIONING. Technical leaflet

Solenoid valves, two-step on/off Type PMLX REFRIGERATION AND AIR CONDITIONING. Technical leaflet Solenoid valves, two-step on/off PMLX REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3

More information

Shut-off ball valve Type GBC

Shut-off ball valve Type GBC Data sheet Shut-off ball valve GBC shut-off ball valves, type GBC, are manually operated shut-off valves suitable for bi-directional flow. The GBC valves are used in liquid, suction and hotgas lines in

More information

TEC 1/2 3/ /4 1 1/ /2 3 4 DN A B 125,5 125,

TEC 1/2 3/ /4 1 1/ /2 3 4 DN A B 125,5 125, 143 B F F C A 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 DN 15 20 25 32 40 50 65 80 100 A 77 85 91 118 126 142 147 179 188 B 125,5 125,5 159 218 225 250 270 290 330 C 40 40 59 69,5 126 87 88 97,5 104,5 F 12 12

More information

Description Supply pressure Pressure range Connection Device Page max. bar bar thread

Description Supply pressure Pressure range Connection Device Page max. bar bar thread Pressure Regulators Supply pressure Pressure range onnection Device Page max. bar bar thread Maxi -Series, robust, interlockable 1 0. 1.8 / 17 G¼ - G1 R0, R1.0 made of plastic, also for liquids 1,5 0 4

More information

Booster Regulator/Air Tank

Booster Regulator/Air Tank Booster Regulator/Air Tank Increase factory air pressure by up to 4 times! Air-only operation requires no power supply, reduces heat generation, and Boost pressure allows easy installation. NEW Renewed

More information

Pressure Measurement Single-range transmitters for general applications

Pressure Measurement Single-range transmitters for general applications Siemens AG 206 Overview Design Device structure without explosion protection The pressure transmitter consists of a piezoresistive measuring cell with a diaphragm installed in a stainless steel enclosure.

More information

Discontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves.

Discontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves. Powers Controls RV 201 Pressure Reducing Valves Description Features Product Numbers Dual Pressure PRV Technical Instructions Document No. 155-049P25 RV 201-1 Single Pressure PRV The RV 201 Pressure Reducing

More information

MODELS & (OBS) REMOTE FLUID PRESSURE REGULATORS (30 OZ./MIN. & 100 OZ./MIN.)

MODELS & (OBS) REMOTE FLUID PRESSURE REGULATORS (30 OZ./MIN. & 100 OZ./MIN.) SERVICE MANUAL EN MODELS 84-598 & 84-599 (OBS) REMOTE FLUID PRESSURE REGULATORS (30 OZ./MIN. & 100 OZ./MIN.) INTRODUCTION The Binks Models 84-598 and 84-599 (obsolete) Remote Fluid Pressure Regulators

More information

Pressure Reducing Valves Pressure Reducing with. Broady Flow Control. D Series Range. Pressure Reducing Valves. Broady Flow Control

Pressure Reducing Valves Pressure Reducing with. Broady Flow Control. D Series Range. Pressure Reducing Valves. Broady Flow Control Pressure Reducing Valves 00 Pressure Reducing with Broady Flow Control D Series Range Pressure Reducing Valves Broady Flow Control The Company Broady Flow Control is an Independent Valve Manufacturer,

More information

Cash Valve TYPE KP PILOT OPERATED BACK PRESSURE VALVE. ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 9001 Certified

Cash Valve TYPE KP PILOT OPERATED BACK PRESSURE VALVE. ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 9001 Certified Cash Valve PILOT OPERATED BACK PRESSURE VALVE ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 01 Certified KP HIGH CAPACITY PILOT OPERATED BACK PRESSURE VALVE DESCRIPTION The Cash Valve Type KP is a pilot

More information