Valve Proving System for automatic Shutoff Valves
|
|
- Bonnie McBride
- 5 years ago
- Views:
Transcription
1 7 66 VVGYR Vlve Proving System for utomtic Shutoff Vlves The 11 vlve proving system is designed for use with shutoff vlves in connection with gs burners nd gs pplinces. In the event of indmissible lekge, the system prevents the burner from strting up. The 11 system conforms to the requirements of 3 covering utomtic shutoff vlves for use with gs burners nd gs-fired pplinces to 1, clss nd pressure switch to 18. The 11 nd this Dt Sheet re intended for use by OMs which integrte the vlve proving system in their products. 66en
2 Use The 11 is designed for utomtic gs vlve proving (lekge test) bsed on the pressure proving principle. It is for use on gs-fired combustion plnt with or without vent pipe to tmosphere. In the cse of plnts with no vent pipe where stndrds pply, the notes given in «onnection exmples without vent pipe to tmosphere» must be observed. Used in connection with 1 or 2 commercilly vilble pressure switches, vlve proving is utomticlly initited with every burner strtup, either - prior to burner strtup - during the prepurge time if it lsts minimum of 60 seconds - immeditely fter controlled shutdown, or - on completion of the burner control s control sequence, e.g. t the end of the postpurge time The vlve proving test is bsed on the 2-stge pressure proving principle: 1. The vlve on the mins side is tested by evcuting the test spce nd by monitoring the tmospheric pressure in it. 2. The vlve on the burner side is checked by pressurizing the test spce nd by monitoring the gs pressure. If the pressure increses excessively during the first test phse clled «Test1», or decreses excessively during the second test phse clled «Test2», the 11. will inhibit burner strtup nd initite lockout. In tht cse, the lockout reset button will light up to indicte the fult. Remote indiction of the fult is lso possible. progrm indictor, which stops whenever fult occurs, indictes which of the vlves is leking. The 11 cn be reset either on the unit itself or vi n electric remote reset fcility. Wrning notes To void injury to persons, dmge to property or the environment, the following wrning notes must be observed. Do not open, interfere with or modify the control unit. ll ctivities (mounting, instlltion nd service work, etc.) must be crried out by qulified stff efore mking ny wiring chnges in the connection re, completely isolte the plnt from mins supply (ll-polr disconnection). nsure tht the plnt cnnot be indvertently switched on gin nd tht it is indeed ded. If not observed, there is risk of electric shock hzrd nsure protection ginst electric shock hzrd by providing dequte protection for the vlve proving system s connection terminls ch time work hs been crried out (mounting, instlltion, service work, etc.), check to ensure tht wiring is in n orderly stte Press the lockout reset button only mnully (pplying force of no more thn 10 ) without using ny tools or pointed objects Do not press the lockout reset button on the unit or the remote reset button (input terminl 18) for more thn 10 seconds, s longer period would dmge the lockout rely inside the unit Fll or shock cn dversely ffect the sfety functions. Do not put such units into opertion, even if they do not exhibit ny dmge 2/22 66en
3 Mounting notes nsure tht the relevnt ntionl sfety regultions re complied with Instll switches nd fuses in ccordnce with locl vlid regultions nsure tht the mximum permissible current lod for the connecting terminls is not exceeded The insultion on internl wiring which is subjected to the mins voltge must withstnd the electricl stress occurring during correct use Instlltion notes Live nd neutrl conductors must not be interchnged. 3/22 66en
4 Stndrds nd certifictes pplied directives: Low-voltge directive 201/3/U Directive for pressure devices 201/68/U Gs pplinces Regultion (U) (U) 20/26 lectromgnetic comptibility M (immunity) *) 201/30/U *) The complince with M emission requirements must be checked fter the vlve monitoring system is instlled in the equipment omplince with the regultions of the pplied directives is verified by the dherence to the following stndrds / regultions: Sfety nd control devices for gs burners nd gs burning DI 3 pplinces - Vlve proving systems for utomtic shut-off vlves utomtic electricl controls for household nd similr use Prt 2-: Prticulr requirements for utomtic electricl burner control systems DI The relevnt vlid edition of the stndrds cn be found in the declrtion of conformity! ote on DI Household nd similr electricl pplinces - Sfety - Prt 2-102: Prticulr requirements for gs, oil nd solid-fuel burning pplinces hving electricl connections. The electricl connections of the 11 nd the GM comply with the requirements of onformity mrk (ursin onformity mrk) ISO 001:201 ISO 1001:201 OHSS 18001:2007 hin RoHS Hzrdous substnces tble: ertified complete with plug-in bse: Type /22 66en
5 Life cycle 11 hs designed lifetime* of 20,000 burner strtup cycles which, under norml operting conditions in heting mode, correspond to pprox. 10 yers of usge (strting from the production dte given on the type field). This lifetime is bsed on the endurnce tests specified in stndrd DI 3. summry of the conditions hs been published by the uropen ontrol Mnufcturers ssocition (fecor) ( The designed lifetime is bsed on use of the 11 ccording to the mnufcturer s Dt Sheet. fter reching the designed lifetime in terms of the number of burner strtup cycles, or the respective time of usge, the 11 is to be replced by uthorized personnel. * The designed lifetime is not the wrrnty time specified in the Terms of Delivery Disposl notes The unit contins electric nd electronic components nd must not be disposed of together with domestic wste. Locl nd currently vlid legisltion must be complied with. Mechnicl design Vlve proving system 11 Housing Plug-in design xchngeble unit fuse (including spre fuse) Mde of impct-proof nd het-resistnt blck plstic Lockout reset button with viewing window showing: The fult signl lmp The lockout indiction - oupled to the progrm spindle - With trnsprent lockout reset button - sy-to-remember symbols indicting the type of fult nd the time lockout occurred - Synchronous motor of the sequence switch with ger trin - mshft with 1 nondjustble cms - Progrm indictor t the hed of the cmshft - 1 min nd 1 uxiliry rely - Lockout rely cn be electriclly reset from remote loction nd provides the «Lockout» nd «Reset» functions - Unit fuse nd spre fuse ll electricl components re interconnected vi printed circuits. /22 66en
6 Type summry rticle no. Type Mins voltge t3 t PZ: V 2, s 2, s PZ: V 2, s 2, s PZ:11.23 ¹) ¹) 11 V s s PZ: ¹) ¹) 230 V s s Legend t3 t Filling the test spce vcuting the test spce ¹) Vlve opening times do not conform to 3 ccessories (to be ordered seprtely) onnection ccessories for Medium-pcity rticle no. Type Plug-in bse with Pg11 threds for cble entry glnds. Refer to Dt Sheet PZ:GM11 GM11 Plug-in bse with M threds for cble entry glnds. Refer to Dt Sheet PZ:GM11.1 GM11.1 Others PT resistor ( 230 V). For lod on terminl of LMG2. PZ:GK2 GK2 6/22 66en
7 Technicl dt Generl unit dt 11 nvironmentl conditions Mins voltge ¹) ¹) 230 V 1%/+10% 11 V 1%/+10% 230 V 1%/+10% 11 V 1%/+10% ¹) Vlve opening times do not conform to 3 Mins frequency Hz ±6 % Unit fuse (built-in) T6.3H20V to DI Primry fuse (externl) Mx. 10 (slow) Weight pprox g Power consumption - During the test pprox. 3. V - During opertion pprox. 2. V Mounting position Optionl Degree of protection IP0 (to be ensured through mounting), except the connection re (terminl bse) Sfety clss II Perm. input current t terminl 1 Mx. (pek current 20 / 20 ms) Perm. current rting of control terminls Mx. (pek current 20 / 20 ms) Required current rting of pressure switch Min. 1, 20 V Storge DI limtic conditions lss 1K3 Mechnicl conditions lss 1M2 Temperture rnge Humidity < % r.h. Trnsport DI limtic conditions lss 2K2 Mechnicl conditions lss 2M2 Temperture rnge Humidity < % r.h. Opertion DI limtic conditions lss 3K Mechnicl conditions lss 3M2 Temperture rnge Humidity < % r.h. Instlltion ltitude Mx. 2,000 m bove se level ution! ondenstion, formtion of ice nd ingress of wter re not permitted! If this is not observed, there is risk of loss of sfety functions nd risk of electric shock. 7/22 66en
8 Function During the first phse of the vlve proving test clled «Test1», tmospheric pressure must exist in the length of pipe between the vlves to be tested. In plnts with vent pipe to tmosphere, tmospheric pressure is vilble if the vlve proving test is mde prior to or during the prepurge time. In plnts without vent pipe, tmospheric pressure is mde vilble s the vlve proving system opens the vlve on the burner side during evcuting the test spce (t). If the vlve proving test 11 is performed fter burner opertion, the vlve on the burner side fter the controlled shutdown cn be kept open until evcuting the test spce (t) hs elpsed, thus lowering the pressure in the test spce nd mking certin its gs content is burnt off in the combustion chmber during the postpurge time. Prerequisite for this procedure is suitble control progrm of the burner control s provided by burner controls type LF, LFL, LGK or L. The test spce is closed off fter evcution. During the first test phse «Test1», which then follows, the 11 checks with the pressure switch if the tmospheric pressure in the test spce is mintined. If the vlve on the mins side is leking, cusing the pressure to rise bove the switching point of the pressure switch, the 11 will trigger n lrm nd initite lockout. The progrm indictor then stops to indicte «Test1». If the pressure does not increse becuse the vlve closes correctly, the 11 continues its progrm with the second test phse «Test2». To this end, the vlve on the mins side is opened to mintin the gs pressure while the test spce (t3) is being filled. During the second test phse if the vlve on the burner side is leking this pressure must not fll below the switching point of the pressure switch. If it does, the 11 will initite lockout lso, thus preventing the burner from strting up. On successful completion of the second test phse, the 11 closes the internl control loop between terminls 3 nd 6 (circuit pth: terminl 3 - contct (r - terminls nd - contct - terminl 6). This control loop is normlly included in the burner control s strt control loop. fter the control loop hs been closed, the progrmming mechnism of the 11 returns to its strt position to switch itself off. During these so-clled idle steps, the positions of the progrmming mechnism s control contcts remin unchnged. 8/22 66en
9 Progrm nd lockout indictor In the event of lockout, the progrmming mechnism stops nd thus the position indictor fitted to the spindle of the mechnism. The symbol tht stops bove the reding mrk indictes the test phse during which lockout occurred nd lso gives the number of progrmming steps completed from the strt of this test phse (1 step = 2. seconds). Mening of the symbols: Test1 Test2 I I I Strt position = operting position In plnts without vent vlve: vcution of test spce by opening the vlve on the burner side «Test1» with tmospheric pressure (vlve proving test on the mins side) Filling the test spce by opening the vlve on the mins side «Test2» with gs pressure (vlve proving test on the burner side) Idle steps until progrmming mechnism switches itself off Operting position = strt position for the next vlve proving test ote! In the event of lockout, ll terminls receiving voltge from the vlve proving system 11 will be deenergized, except terminl 13, which is used for lockout indiction. fter reset, the progrmming mechnism utomticlly returns to its strt position to immeditely progrm new vlve proving test. Do not press the reset button for more thn 10 seconds. ontrol sequence fter power filure power filure prior to evcuting the test spce does not cuse the control sequence to chnge. If power filure occurs fter the evcution, the vlve proving test will not be continued when power is restored, but the progrmming mechnism first returns to its strt position nd then performs the complete vlve proving test. /22 66en
10 lcultion of the lekge rte escping from length of pipe (PG - PW) x V x 3600 QLeck = Ptm x ttest Legend Qleck in dm³/h Permissible lekge rte in dm³ per hour or liters per hour PG in kp Overpressure in pipe section between the vlves to be tested, t the beginning of the test phse PW in kp Overpressure set on pressure switch (normlly set to 0 % of the gs mins pressure) Ptm in kp bsolute pressure (101,3 kp norml pressure) V in dm³ Volume of test spce confined by the vlves to be tested, including the spce in the vlves themselves Ttest in s Durtion of proving time xmple PG PW = 3 kp = 1. kp (3-1.) x x 3600 QLeck = = 20 l/h x 27. Ptm V = kp = dm³ ny vlve lekge rte exceeding 20 l/h cuses the 11 to initite lockout ttest = 27. s ote! Select volume of pipe section (V) between the gs vlves to be checked nd overpressure (PW) set on pressure switch () such tht the mximum permissible gs lekge rte (QLeck) will not exceed the rte specified in the locl regultions. 10/22 66en
11 onnection digrm L Si 1) K2 SK 7661/ S 3 r2 6 I 8 b b V b b XI HR br1 r1 1 1 IX b X b IV tm. Gs P VII R VI b b V b r3 1) K1 L1 br2 SM M ~ R Legend R S R K1 K2 HR L1 Si SK SM lrm signl for «leking vlve» Working rely with contcts (r...) Unit fuse (built-in) Lockout rely with contcts (br...) Pressure switch for vlve proving test (does not replce the gs pressure switch used to signl lck of gs) Lockout reset button Remote lockout reset button Gs pressure switch (for lck of gs) uxiliry rely with contcts (hr...) Lockout wrning lmp (built-in) xternl primry fuse ontrol contct (for inititing the vlve proving test) Synchronous motor of progrmming mechnism 1) Do not press lockout reset button (K) for more thn 10 seconds 11/22 66en
12 Sequence digrm t I b t IV V b t t1 10 VI b VII V IX XI b b b t6 t3 t X b R Progrm indiction Test1 Test2 766b01e/0601 Output terminls controlled by the control unit or electriclly connected Legend t1 22. s *) First test phse with tmospheric pressure t2 27. s *) Second test phse with gs pressure For t3 2. s *) Filling the test spce t 2. s *) vcuting the test spce For t3 s *) Filling the test spce t s *) vcuting the test spce t 66.3 s *) Totl durtion of vlve proving test until burner is relesed t6 7. s *) Intervl from strt to energizing working rely (R) t s *) Running time of progrmming mechnism until it switches itself off in the operting = strt position (idle steps) *) t 0 Hz Gs vlves controlled to evcute the test spce Gs vlves controlled to fill the test spce Vent vlve, normlly open; closed during vlve proving test from the beginning of «Test1» 12/22 66en
13 onnection exmples with vent pipe to tmosphere using burner controls type LG2 / LG3 / LG / LMG2 For other connections, refer to the connection digrm of the relevnt burner control. H L Vlve proving test prior to burner strtup LG2.../3.../.../LMG S / R / W 3 M / Vlve proving test following immeditely the controlled shutdown 76606/0703 LG2.../3.../.../LMG S / R / W M H L 2 1 GK2 3) P 1 r XI r I XI ³) Only in connection with LMG2 Plnts with vent pipe to tmosphere s01/06 onnection exmples with vent pipe to tmosphere using burner controls type LF, LFL or LGK, or the control unit L heck during the prepurge time (min. 60 seconds) nd heck following immeditely the controlled shutdown following immeditely the controlled shutdown in plnts with vent pipe to tmosphere. Dely on mke of rely xpnding flme burner or interrupted pilot burner d >2 seconds. xpnding flme burner or interrupted pilot burner LF1 L1 LFL1... LGK / / 76610/001 LF1 L1 LFL1... LGK... 8 /10 18 / 76611/001 W R K2 d r LP 3 6 I V XI K r W R 6 8 I 7 10 V 12 1 XI /22 66en
14 onnection exmples with vent pipe to tmosphere using burner controls type LF, LFL or LGK, or the control unit L For other connections, refer to the connection digrm of the relevnt burner control. heck just prior to burner strtup xpnding flme burner or interrupted pilot burner heck during the prepurge time (min. 60 seconds) xpnding flme burner or interrupted pilot burner LF1 L1 8 / /001 LF1 L / /001 LFL1... LGK / LFL1... LGK / W W R R LP K r I 10 V XI K r I 10 V 12 1 XI Vlve proving test with 2 pressure switches G Pressure switch for the vlve proving test with gs pressure. This pressure switch must be set to the minimum gs pressure permitted during the proving test. If this pressure is not reched during the test, lockout will be initited. Pressure switch for the gs vlve proving test with tmospheric pressure. This pressure switch must be set to the mximum gs pressure permitted during the proving test with tmospheric pressure. If this pressure is exceeded during the test, lockout will be initited. Pressure switch (G) nd pressure switch () must be overlod-proof up to the gs pressure vlue. G Plnts with vent pipe () to tmosphere SKP s02/070 ) ( R 1/22 66en
15 onnection exmples without vent pipe to tmosphere (for pplictions not covered by 676) using burner controls type LF, LFL or LGK, or the control unit L heck following immeditely the controlled shutdown in plnts without vent pipe. Vlve () or vlve (1) remins open fter the controlled shutdown until the strt of the first test phse is reched in order to evcute the test spce nd to burn off the gs in the combustion chmber during the fterburn time. xpnding flme burner or interrupted pilot burner LF1 L1 8 / /001 3 LFL1... LGK / 7 6 W R M2 K r I V 12 1 XI Vlve proving test with 2 pressure switches G Pressure switch for the vlve proving test with gs pressure. This pressure switch must be set to the minimum gs pressure permitted during the proving test. If this pressure is not reched during the test, lockout will be initited. Pressure switch for the gs vlve proving test with tmospheric pressure. This pressure switch must be set to the mximum gs pressure permitted during the proving test with tmospheric pressure. If this pressure is exceeded during the test, lockout will be initited. Pressure switch (G) nd pressure switch () must be overlod-proof up to the gs pressure vlue. G Plnts without vent pipe to tmosphere PL SKP ) ( R ir pressure (PL) for the SKP7 must be sufficiently high to open the SKP7 lthough the burner s ir dmper is closed. Otherwise, the 11 will initite lockout when performing «Test1». 1/22 66en
16 onnection exmples without vent pipe to tmosphere using burner controls type LG2 / LG3 / LG / LMG2 For other connections, refer to the connection digrm of the relevnt burner control. heck prior to burner strtup heck following immeditely the controlled shutdown 76613/ /0703 LG2.../3.../.../LMG LG2.../3.../.../LMG L H M 2 S / R / W M 2 GK2 3) P S / R / W L H 1 3 r V XI r I V XI ³) Only in connection with LMG2 Plnts without vent pipe to tmosphere 766s0/ /22 66en
17 onnection exmples without vent pipe to tmosphere using burner controls type LF, LFL or LGK, or the control unit L For other connections, refer to the connection digrm of the relevnt burner control. heck just prior to burner strtup xpnding flme burner or interrupted pilot burner heck during the prepurge time (min. 60 seconds) xpnding flme burner or interrupted pilot burner LF1 L1 8 / /001 LF1 L / /001 LFL1... LGK / LFL1... LGK / W W R R LP K r I V XI K r I V XI Vlve proving test with 2 pressure switches G Pressure switch for the vlve proving test with gs pressure. This pressure switch must be set to the minimum gs pressure permitted during the proving test. If this pressure is not reched during the test, lockout will be initited. Pressure switch for the gs vlve proving test with tmospheric pressure. This pressure switch must be set to the mximum gs pressure permitted during the proving test with tmospheric pressure. If this pressure is exceeded during the test, lockout will be initited. Pressure switch (G) nd pressure switch () must be overlod-proof up to the gs pressure vlue. G Plnts without vent pipe to tmosphere SKP7... ir pressure (PL) for the SKP7 must be sufficiently high to open the SKP7 lthough the burner s ir dmper is closed. Otherwise, the 11 will initite lockout when performing «Test1». /22 66en
18 r2 onnection exmples without vent pipe to tmosphere using burner controls type LF, LFL or LGK, or control unit L nd ctutor SKP7 with expnding flme burners For other connections, refer to the connection digrm of the relevnt burner control heck just prior to burner strtup heck during the prepurge time (min. 60 seconds) LF1 L /001 3/ LF1 L /001 3/ LFL1... LGK /7 LFL1... LGK /7 T W M W R LP K I 10 V 12 1 XI R K r2 1 1 LP 6 8 I V M 12 XI Vlve proving test with 2 pressure switches G Pressure switch for the vlve proving test with gs pressure. This pressure switch must be set to the minimum gs pressure permitted during the proving test. If this pressure is not reched during the test, lockout will be initited. Pressure switch for the gs vlve proving test with tmospheric pressure. This pressure switch must be set to the mximum gs pressure permitted during the proving test with tmospheric pressure. If this pressure is exceeded during the test, lockout will be initited. Pressure switch (G) nd pressure switch () must be overlod-proof up to the gs pressure level. G Plnts without vent pipe to tmosphere SKP /22 66en
19 onnection exmples without vent pipe to tmosphere using burner controls type LM21.xxxx / LM22.xxxx with expnding flme burners For other connections, refer to the connection digrm of the relevnt burner control. LM21.xxxx / LM22.xxxx with 11 vlve proving efore strtup of burner In the cse of plnts without vent pipe to tmosphere T LM21.xxx... LM22.xxx... RST K1 K2/1 K2/2 K3 K K Gpmin R / W T ST 1) M Z 2 LP M K2 T 1) e/0210 I r2 HR V XI Gs tmospheric 1) Fn motor connected to terminl 3 of the LM21.xxxx / LM22.xxxx Vlve proving is strted ech time the system is switched on, with connection of terminl 3, fter controller O or fter lockout If the 11 initites lockout, vlve proving cn tke up to 0 seconds. Therefore, the mximum permissible response time of the ir pressure switch is 180 seconds With the 11, fults during vlve proving led to lockout nd, with the LM21.xxxx / LM22.xxxx, to lockout due to ir pressure switch timeout (blink code 03) ote! fulty ir pressure switch (switch does not mke) leds to lockout (blink code 03) on completion of the pressure switch response time of 180 seconds nd cn be distinguished from lockout due to fulty vlve proving only becuse the 11 did not go to lockout The fn motor cn be connected either to terminl 3 in connection with link between terminls 6 nd 2 of the 11 (motor ctive during vlve proving) or to terminl 6 of the 11 (motor ctive on completion of successful vlve proving) 1/22 66en
20 onnection exmples with vent pipe to tmosphere using burner controls type LM21.xxxx / LM22.xxxx with expnding flme burners For other connections, refer to the connection digrm of the relevnt burner control. LM21.xxxx / LM22.xxxx with 11 vlve proving Vlve supervision before strtup of burner In the cse of plnts with vent pipe to tmosphere T LM21.xxx... LM22.xxx... RST K1 K2/1 K2/2 K3 K K Gpmin R / W LP T ST 1) M Z 1 2 M K2 T 1) 71012e/0210 I r2 HR V XI Gs tmospheric 1) Fn motor connected to terminl 3 of the LM21.xxxx / LM22.xxxx Vlve proving is strted ech time the system is switched on, with connection of terminl 3, fter controller O or fter lockout If the 11 initites lockout, vlve proving cn tke up to 0 seconds. Therefore, the mximum permissible response time of the ir pressure switch is 180 seconds With the 11, fults during vlve proving led to lockout nd, with the LM21.xxxx / LM22.xxxx, to lockout due to ir pressure switch timeout (blink code 03) ote! fulty ir pressure switch (switch does not mke) leds to lockout (blink code 03) on completion of the pressure switch response time of 180 seconds nd cn be distinguished from lockout due to fulty vlve proving only becuse the 11 did not go to lockout The fn motor cn be connected either to terminl 3 in connection with link between terminls 6 nd 2 of the 11 (motor ctive during vlve proving) or to terminl 6 of the 11 (motor ctive on completion of successful vlve proving) 20/22 66en
21 Legend, 1, 2 Gs vlves controlled to evcute the test spce GK2 PT resistor lrm signl for «leking vlve» r... ontcts (operting rely) Gs vlve controlled to fill the test spce Vent vlve, normlly open; closed during vlve proving test from the beginning of «Test1» Pressure switch for vlve proving test (does not replce the gs pressure switch used to signl lck of gs) Sfety shutoff vlve, ded closed (optionl) K Lockout reset button (internl) K2 Remote lockout reset button FSV Flme signl mplifier Gs pressure switch (for lck of gs) H Min switch IO Ioniztion probe K1... Internl relys hr... ontcts (uxiliry rely) LP ir pressure switch M... Fn («M2»: pre- nd postpurging) T Power supply PL ombustion chmber pressure (reference vrible) for SKP7 R ontrol thermostt or pressurestt (e.g. boiler control thermostt) R Pipe orifice; its dimeter must be determined such tht in the event of leking ignition gs vlve (), the ignition flme cnnot fterburn on completion of the second sfety time so tht presence of the min flme cnnot be simulted S Sfety limit thermostt ST Sfety limit thermostt T Dely off time rely; the time should be set to pprox. «t» (min. «t7»... mx. «t10») of the burner control W Limit thermostt or pressure switch or pressure limiter Z Ignition trnsformer t7 t10 t Intervl between strt commnd nd power t terminl 7 (strt dely for «M2») Intervl from strt to the beginning of the ir pressure check, excluding running time of ir dmper Intervl until OP commnd for the ir dmper is given 21/22 66en
22 Dimensions Dimensions in mm , 1, 27, 27, 7, Plug-in bse GM11 / GM m0/ / Siemens G, erliner Ring 23, D-7637 Rsttt Subject to chnge! 66en
Valve Proving System for automatic Shutoff Valves
LGY lve Proving System for utomtic Shutoff lves 11... The 11... vlve proving system is designed for use with shutoff vlves in connection with gs urners nd gs pplinces. n the event of indmissile lekge,
More informationValve Proving System for automatic Shutoff Valves
LGY lve Proving System for utomtic Shutoff lves... The... vlve proving system is designed for use with shutoff vlves in connection with gs urners nd gs pplinces. n the event of indmissile lekge, the system
More informationBypass Compensator Cartridge, Size 16
Bypss Compenstor Crtridge, Size 6 Q mx = 5 l/min, p mx = 42 br Direct cting, djustble compenstor spring Description These direct-cting bypss pressure-compenstor (hydrostt) crtridges, series DWDP-2B -6,
More informationTHERMOFLO FLUID PUMPS& SYSTEMS THERMOFLO FOR HEATING, COOLING AND WATER SUPPLY APPLICATIONS TO BS7074 SEALED SYSTEMS EXPANSION VESSELS PRESSURIZERS
THERMOFLO S E A L E D S Y S T E M S THERMOFLO SEALED SYSTEMS FOR HEATING, COOLING AND WATER SUPPLY APPLICATIONS TO BS7074 EXPANSION VESSELS PRESSURIZERS PUMPS& SYSTEMS WALL OR BASE MOUNTING PRESSURIZERS
More informationThe Discussion of this exercise covers the following points: The open-loop Ziegler-Nichols method. The open-loop Ziegler-Nichols method
Exercise 6-3 Level Process Control EXERCISE OBJECTIVE In this exercise, you will perform PID control of level process. You will use the open-loop step response method to tune the controller. DISCUSSION
More informationHot-Air Blowers 12 / / Hot-Air Blowers
Hot-Air Blowers MISTRAL HOTWIND PREMIUM / HOTWIND SYSTEM MISTRAL Accessories HOTWIND Accessories VULCAN SYSTEM VULCAN SYSTEM Accessories IGNITER BM4/BR4 IGNITER BM4/BR4 Accessories 12 / 13 14 / 15 16 17
More informationAutomatic Valve Proving Control
ISO 9001 Automatic Valve Proving Control 7 696 LDU11 UL recognized FM approved Features Performs leak test of the gas shut-off valves before start-up and/or immediately after burner shut-down No inlet
More informationVB-7253 Series. Application. Features. Applicable Literature
VB-7253 Series 1/2 to 2 Screwed NPT Stinless Steel Trim with Teflon Disc Stem Up Open, Two-Wy Vlves Generl Instructions Appliction VB-7253 series single set, stem down to close, two wy vlves control wter
More informationLesson 8: Application Technology
The type of ppliction equipment used must suit the type of ppliction. In this module, you ll lern the prts of the most common types of ppliction equipment used by ssistnt pplictors, s well s how to properly
More informationTANTALUM ELECTROLYTIC CAPACITORS
TNTLUM LTROLYTI PITORS TMM Series (Miniturized Tntlum hip pcitors with xtended pcitnce Rnge) Fetures model type miniturized chip cpcitor developed on the bsis of TMS production technology idel for high
More informationhis is a preview only - it is not a valid BS7671 certificate. This is a nly - it is not a valid BS7671 certificate. This is a preview only - it is
certificte vlid the seril review - it vlid number hs been defced certificte. or ltered nly - it vlid ELECTRICAL certificte. INSTALLATION CERTIFICATE - it Issued in ccordnce with Brith Stndrd 7671 Requirements
More informationANNEX 1 CLASSIFICATION AND LABELLING SUMMARY TABLES
ANNEX CLASSIFICATION AND LABELLING SUMMARY TABLES ANNEX CLASSIFICATION AND LABELLING SUMMARY TABLES NOTE: The codifiction of hzrd s is further explined in Annex 3 (Section ). The hzrd re intended to be
More informationSGP-20S SGP-25S SGP-32S SGP-40S. Price $ $ $ $ Filtered compressed air, lubricated or non-lubricated
SGP-S -JW SELF-ENTERING PRLLEL PNEUMTI GRIPPER (SERIES SGP-S) Double-ting. Ptented bklsh djusting system. High performne in ompt size. The rugged onstrution ensures trouble-free long life nd relibility
More information2014 Victorian Shooting Championship
2014 Victorin Shooting Chmpionship VPCI, in conjunction with the Stte Coches nd the Stte Umpires invite ll PFA licensed petnque plyers in the Stte of Victori to tke prt in the 2014 Victorin Shooting Chmpionship.
More informationWorkfit -SR, Dual Monitor Short Surface
User's Guide Workfit -SR, Dul Monitor Short Surfce Do not throw wy! Crdord locks needed for instlltion. Visit http://www.ergotron.com/workfi t-sr-instll for instlltion instructionl video. NOTE: 10 feet
More informationMinnesota s Wild Turkey Harvest Fall 2016, Spring 2017
Minnesot s Wild Turkey Hrvest Fll 2016, Spring 2017 Lindsey Messinger Frmlnd Wildlife Popultions nd Reserch Group Minnesot Deprtment of Nturl Resources Mdeli, Minnesot 15 August 2017 Summry of Seson Structure
More informationCorrective actions identified
University of Otgo Lbortory helth nd sfety udit tool Deprtment: Loction Detils: DLM: Building: Room: Dte: Nme Of Auditor(s) Signture of Auditor(s) Lbortory Designtions: HSNO Exempt Rdionuclide Lbortory
More informationML OXIPRES INSTRUCTION MANUAL
ML OXIPRES INSTRUCTION MNUL Version 2018.02.01 xel Kiers Vej 34-8270 Højbjerg - Denmark MIKROL RHUS /S Tlph: +45 86 29 61 11 - Fax: +45 86 29 61 22 - E-mail: ml@mikrolab.dk INDEX WRNING... page 2 DESCRIPTION...
More informationSolenoid gas valve. The solenoid gas valve is also applicable as a main gas valve Pilot gas valve for forced draft burners
7 634 VGS1... with AGA67 connector VGS2... with AGA67 connector Solenoid gas valve VGS The solenoid gas valve is also applicable as a main gas valve Pilot gas valve for forced draft burners The VGS and
More informationHybrid Relief Valves
Hyrid Relief Vlves Crtridge Type Pge Diret Ating Relief, Before Chek 7 Diret Ating Relief, After Chek 7 Pilot Operted, Blned Piston, Ventle, Relief, Before Chek 7 T-8A Pilot Operted, Blned Piston, Ventle,
More informationChapter 4 Group of Volunteers
CHAPTER 4 SAFETY CLEARANCE, FREEBOARD AND DRAUGHT MARKS 4-1 GENERAL 4-1.1 This chpter specifies the minimum freebord for inlnd wterwy vessels. It lso contins requirements concerning the indiction of the
More informationPOWER COMBICON feed-through plugs mm pitch DFK-PC 16/...-ST(F)-10,16
feed-through plugs 0.6 mm pitch DFK-PC 6/...-ST(F)-0,6 If 6 mm conductor is used, the new feed-through plug connector offers the possibility to trnsfer current of 76 A from inside the device to outside
More informationINDUSTRIAL. AUTOMOTIVE. AUTOMATION. ENERGY EFFECTIVE ENERGY SOLUTIONS
INDUSTRIL. UTOMOTIVE. UTOMTION. ENERGY EFFECTIVE ENERGY SOLUTIONS INTELLIGENT SOLUTIONS FOR MORE EFFICIENCY ND SFETY ENERGY SVING MODULE WITH LED INDICTION CE ND EN 161 CERTIFIED FLNGE OR THRED CONNECTION
More informationDouble valves for biogases and recycling gases
7 649 Double valves for biogases and recycling gases VRD4... Valve (class A) for installation in gas trains Safety shutoff valves in connection with actuators (conforming to EN 161) Suited for use with
More informationVGD40.../VGD41... Double gas valves. Building Technologies Division Infrastructure & Cities Sector
7 61 VGD20... Double gas valves VGD40.../VGD41... VGD2... VGD4... Double gas valves of class A for integration into gas trains Safety shutoff valves conforming to EN 161 in connection with SKPx5... actuators
More informationOwner s Manual. For TH330MR1 Hydraulic Winches Dedicated for Personnel Lifting
Red this Owner s Mnul thoroughly before operting the equipment. Keep it with the equipment t ll times. Replcements re vilble from Thern, Inc., PO Box 347, Winon, MN 55987, 507-454-2996. www.thern.com IMPORTANT:
More informationA Measurement Framework for National Key Performance Measures
MINISTERIAL COUNCIL ON EDUCATION, EMPLOYMENT, TRAINING AND YOUTH AFFAIRS Performnce Mesurement nd Reporting Tskforce Working for qulity eduction outcomes A Mesurement Frmework for Ntionl Key Performnce
More informationERRATA for Guide for the Development of Bicycle Facilities, 4th Edition (GBF-4)
Dvid Bernhrdt, P.E., President Commissioner, Mine Deprtment of Trnsporttion Bud Wright, Executive Director 444 North Cpitol Street NW, Suite 249, Wshington, DC 20001 (202) 624-5800 Fx: (202) 624-5806 www.trnsporttion.org
More informationInverted POWER COMBICON feed-through plugs mm pitch DFK-IPC 16/...-ST(F)-10,16
.6 mm pitch DFK-IPC 6/...-ST(F)-,6 In the inverted versions of the DFK-IPC 6 feed-through connectors, the screw connection on the device side is designed with femle insted of mle contcts.this gives touch-proof
More informationFirst Aid in School Policy
First Aid in School Policy Approved y the Governing Body of West Monkton Church of Englnd Primry School: Reviewed y Governors nd Agreed: Septemer 2017 At West Monkton we im to e n inspirtionl community,
More informationEG15*... SERIES. SOLENOID GAS VALVES WITH 1/2 CONNECTION AND OPERATING PRESSURE UP TO 500 mbar DESCRIPTION
EG15*... ERIE OLENOID G VLVE WITH 1/2 CONNECTION ND OPERTING PREURE UP TO 500 mbar DECRIPTION This series of solenoid gas valves are of normally closed type, suitable for civil and industrial applications,
More informationSETUP & PREPARATION KNOW YOUR PRODUCT 1. ASSEMBLY CORDLESS POLE PRUNER. Fitting Rear Handle
STANDARD EQUIPMENT Pole Chin Guide Br CORDLESS POLE PRUNER Guide Br Cover INSTRUCTION MANUAL Rer Hndle SPECIFICATIONS Input: Br Length: Cutting Length Mx.: Chin Speed: Oil Tnk Cpcity: Length: Weight: 18V
More informationFirearm Safety. Links to Topics below XAVIER BECERRA THE SIX BASIC GUN SAFETY RULES. Attorney Genera] The. Six Basic Gun Safety Rules
firerm Sfety Stte of Cliforni - Deprtment of Justice - Office of the Attorney Generl Pge 1 of 14 Stte of Cliforni Deprtment of]ustice XAVIER BECERRA Attorney Gener] Serch Trnslte Website Trducir Sitio
More informationANATOMY OF A TRIPOD: Friction Lock (column) 8 Boots / Footwear. Friction Lock (Leg)
IMPORTANT DO NOT USE YOUR TRIPOD UNTIL YOU HAVE READ THESE INSTRUCTIONS. NO WARRANTY CLAIM WILL BE ENTERED INTO FOR THE MISUSE OR INCORRECT USE OF THESE PRODUCTS. ANATOMY OF A TRIPOD: We offer the three
More informationUnited States Patent (19)
United Sttes Ptent (19) Mobley (11) 45) Ptent Number: Dte of Ptent: Nov. 19, 1991 (54) BICYCLE RACK FORMOUNTING ON A VAN 76 Inventor: Mrk H. Mobley, P.O. Box 636, Norris, Tenn. 37828 21 Appl. No.: 436,492
More informationQPL... Pressure Switches. Siemens Building Technologies HVAC Products
7 221 Pressure Switches QPL... The pressure switches are used for monitoring gas or air pressures. When the pressure falls below the switching point, the associated electrical circuit will open or switch
More informationBERMAD Fire Protection
FP/FS 400Y Torrent Vlve Engineering Dt Description The BERMAD FP/FS-400Y Torrent vlve is esigne specificlly for the fire protection inustry, with n emphsis on rugge relibility n high performnce to comply
More informationUNIFORM STANDARD DRAWINGS CLARK COUNTY AREA, NEVADA YEAR 2016 REVISIONS
, NEVD YER 2016 REVISIONS DWG NO. TITLE ND REVISIONS SUMMRY EFFECTIVE DTE 223.1 Residential Driveway without djacent Sidewalk 7/1/2016 New Drawing to allow flexibility in Roadway Design. 234.1 Typical
More informationSPECIFICATIONS ATTENTION
VPS 504 S06 Installation Manual - P/N 80122 - Ed. 01/09 VPS 504 S06 and S05 Valve Proving System Installation Instructions VPS 1 6 Gases Natural gas, air and other inert gases. NOT suitable for butane
More informationPinpoint GPS. FCC and IC Compliance Statement
FCC nd IC Complince Sttement PINPOINT KEY FOB, FCC ID MVU10148 ACMA: N2523 IC: 6094A 09291, 6094A 09305 This device complies with prt 15 of the FCC Rules. Opertion is suject to the following two conditions:
More informationOperation Maintenance Installation Warranty Manual
Opertion Mintennce Instlltion Wrrnty Mnul 2017 Mercury Mrine Xi3 Wireless Edition ORIGINAL LANGUAGE INSTRUCTIONS FCC nd IC Complince Sttement Xi SERIES WIRELESS FOOT PEDAL FCC ID MVU09291 Xi SERIES WIRELESS
More informationAsbestos Management Program
( Asbestos Mngement Progrm < West Virgini University Morgntown, WV 26506 West Virgini University '(/' Asbestos Mngement Progrm Best Prctice Mnul 1 of 22 Tble Of Contents 1.0 INTRODUCTION 4 1.1 1.2 1.3
More informationGRENADES INTRODUCTION: EOD CONSIDERATIONS ANTI-ARMOR/HEAT: SAFETY: FRAGMENTATION: IMPACT FRAGMENTATION: FOR OFFICIAL USE ONLY FOR OFFICIAL USE ONLY
INTRODUCTION: Hnd or rifle projected. Min chrge includes HE, riot-control gents, smokes, nd incendiry nd pyrotechnic mterils. Fuzing is vried nd my be time-dely or impct fuzed. Are esily nd frequently
More informationOwner s Manual For TAC Series Planetary Gear Air Winches ORIGINAL TEXT
Red this Owner s Mnul thoroughly efore operting the equipment. Keep it with the equipment t ll times. Replcements re ville from Thern, Inc., PO Box 347, Winon, MN 55987, 507-454-2996. www.thern.com IMPORTANT:
More informationVGG... VGF... VGH... Gas Valves. Building Technologies HVAC Products VGG... VGF... VGH...
7 66 VGG... VGF... VGH... Gas Valves VGG... VGF... VGH... Single valves of class A for installation in gas trains Safety shutoff valves conforming to EN 161 in connection with SKP... actuators Suitable
More informationVGG... VGF... VGH... Gas Valves. Building Technologies HVAC Products VGG... VGF... VGH...
7 66 VGG... VGF... VGH... Gas Valves VGG... VGF... VGH... Single valves of class A for installation in gas trains Safety shutoff valves conforming to EN161 in connection with actuators Suitable for use
More informationVGF... VGH... Building Technologies Division Infrastructure & Cities Sector VGG... VGF... VGH...
7 66 VGG... VGF... VGH... Gas Valves VGG... VGF... VGH... Single valves of class A for installation in gas trains Safety shutoff valves conforming to EN 161 in connection with actuators Suitable for use
More information* Different spooltypes up to 330 l/min. in combination with simultaneously control.
V-22 Fetures. * Modulr ssemly system, suitle for 'uild rogrm'. * Mx. operting pressure 420 r. * Different spooltypes up to 330 l/min. in comintion with simultneously control. * Compct sndwich design, suitle
More informationO.K. Safety first CDN USA. Table of Contents. Approvals. Attention IFGC CSA UL ANSI NFPA
S06 & S02 Valve Proving System Installation Instructions USA CDN Table of Contents Table of Contents... Page 1 Approvals... Page 1 Attention... Page 1 Specification... Page 2 Mounting.... Page 3 Wiring...
More informationX5-55/X5-70/X5-80/X Operation Maintenance Installation Warranty Manual
X5-55/X5-70/X5-80/X5-105 Opertion Mintennce Instlltion Wrrnty Mnul EU Complince Sttement Attwood Corportion hereby declres tht the MotorGuide X5 trolling motor is in complince with the essentil requirements
More informationINSTRUCTION MANUAL. CET MkII TUBULAR REACTOR. CET MkII ISSUE 16
INSTRUCTION MANUAL CET MkII TUBULAR REACTOR CET MkII ISSUE 6 JANUARY 26 IMPORTANT SAFETY INFORMATION All prcticl work res nd lbortories should be covered by locl regultions which must be followed t ll
More informationDouble gas valves for biogases and recycling gases
7 649 Double gas valves for biogases and recycling gases VRD4... Class A double gas valve for mounting into gas trains Safety shutoff valves acc. to EN 161 in connection with actuators Suitable for use
More informationVGG... VGF... VGH... Gas Valves. Siemens Building Technologies HVAC Products VGG... VGF... VGH...
7 636 VGG... VGF... VGH... Gas Valves VGG... VGF... VGH... Single valves of class A for installation in gas trains Safety shutoff valves conforming to EN 161 in connection with SKP... actuators Suitable
More informationANTI-SURGE SEWAGE AIR RELEASE AND VACUUM BREAK VALVES FOR EFFECTIVE AIR RELEASE, VACUUM PROTECTION AND SURGE ALLEVIATION
R SERIES RGX II ANTI-SURGE SEWAGE AIR RELEASE AND VACUUM BREAK VALVES FOR EFFECTIVE AIR RELEASE, VACUUM PROTECTION AND SURGE ALLEVIATION R AIR RELEASE & VACUUM BREAK VALVES SERIES RGXII ANTI - SURGE The
More informationBicycle wheel and swivel chair
Aim: To show conservtion of ngulr momentum. To clrify the vector chrcteristics of ngulr momentum. (In this demonstrtion especilly the direction of ngulr momentum is importnt.) Subjects: Digrm: 1Q40 (Conservtion
More information400 Series Flat Panel Monitor Arm Rotate Mount Double Pivot P/L
User's Guide 400 Series Flt Pnel Monitor Arm Rotte Mount Doule Pivot P/L < 23ls. (10.44 kg) For the ltest User Instlltion Guide plese visit: www.ergotron.om 1 of 10 Hzrd Symols Review These symols lert
More information(12) Patent Application Publication (10) Pub. No.: US 2003/ A1
US 2003O183916A1 (19) United Sttes (12) Ptent Appliction Publiction (10) Pub. No.: US 2003/0183916A1 Heck et l. (43) Pub. Dte: Oct. 2, 2003 (54) PACKAGING (22) Filed: Mr. 27, 2002 MICROELECTROMECHANICAL
More informationGarden City Community Park - Bike Terrain Park Consultation Process
To: From: City of Richmond Prks, Recretion nd Culturl Services Committee Mike Redpth, Senior Mnger, Prks Report to Committee To V~-- \Wht A 20 x>r3. \ Dte: My 13, 2013 File: 06-2345-20- MNOR1NoI01 Re:
More informationOwner s Man ual. For MTA1000 and MTA2000 Series Cycloidal Gear Air Winches
Red this Own er s Mn u l thor ough ly e fore op er t ing the equip ment. Keep it with the equip ment t ll times. Re plce ments re vil le from Thern, Inc., PO Box 347, Winon, MN 55987, 507-454-2996. www.thern.com
More informationValve Proving System VDK 200 A S06*
Valve Proving System VDK 200 A S06* Valve proving system with the following approvals. UL Recognized File # MH17004 CSA Certified File # 1637485 CSA Requirement No. 4-01 (USA) Technical Information Letter
More informationCENTRIFUGAL AERATION FANS
CENTRIFUGL ERTION S LIFTING LUGS OR RINGS ON LL SIZES. NOTES: 1. LL DIMENSIONS RE IN INCHES. 2. ROTTIONS RE CW (CLOCKWISE) OR CCW (COUNTER CLOCKWISE). 3. OUTLET CN BE POSITIONED S UP-BLST, DOWN-BLST, TOP-HORIZ.,
More informationPinpoint GPS 90-8M
FCC nd IC Complince Sttement PINPOINT KEY FOB, FCC ID MVU10148 ACMA: N2523 IC: 6094A 09291, 6094A 09305 This device complies with prt 15 of the FCC Rules. Opertion is suject to the following two conditions:
More informationOwner s Manual For 4WM2 Series Worm Gear Hand Winch ORIGINAL TEXT
Red this Owner s Mnul thoroughly efore operting the equipment. Keep it with the equipment t ll times. Replcements re ville from Thern, Inc., PO Box 347, Winon, MN 55987, 507-454-2996. www.thern.com IMPORTANT:
More informationINSTALLATION INSTRUCTIONS AND USER MANUAL FOR SLOAN EAF GOOSENECK SERIES FAUCETS
ode No: 0816409 Rev. 1 (07/11) INSTLLTION INSTRUTIONS ND USER MNUL FOR SLON EF GOOSENEK SERIES FUETS EF-700 Powered, Sensor ctivated Electronic Gooseneck Hand Washing Faucets EF-750 attery Powered, Sensor
More informationOperation Maintenance Installation Warranty Manual
2017 Mercury Mrine Xi5 Wireless Edition Opertion Mintennce Instlltion Wrrnty Mnul 8M0124200 117 eng eng ORIGINAL LANGUAGE INSTRUCTIONS FCC nd IC Complince Sttement Xi5 WIRELESS FOOT PEDAL FCC ID MVU09291
More informationRENEWABLE SOFTWARE THE EASY WAY
RENEWABLE SOFTWARE THE EASY WAY For more inmtion plese 0800 612 43 42 or visit www.esy-rss.co.uk ? UK s & Environmentl Stw renewble environmentl secrs. The Stw Suite Completing complint ccurte Clcultions
More informationOwner s Manual For M452 and M492 Series Spur Gear Hand Winches ORIGINAL TEXT
Red this Owner s Mnul thoroughly efore operting the equipment. Keep it with the equipment t ll times. Replcements re ville from Thern, Inc., PO Box 347, Winon, MN 55987, 507-454-2996. www.thern.com IMPORTANT:
More information* LANDING ROLLED CURB SIDEWALK RAMP TYPE R (ROLLED SIDES) * LANDING ** RAMP FULL CURB HEIGHT MAY BE REDUCED TO ACCOMMODATE MAXIMUM SIDE FLARE SLOPE
* MXIMUM LNDING IS 2.0% IN ECH DIRECTION OF TRVEL. LNDING MINIMUM DIMENSIONS 5' x 5'. ** MXIMUM RMP CROSS IS 2.0%, RUNNING 5% - 7% (8.3% MXIMUM). "NON-WLKING" RE * LNDING 24" CROSS FULL WIDTH PERMNENT
More informationTECHNICAL BULLETINApril 2016
SYN-86 TECHNICAL BULLETINApril 216 Synovex One-Feedlot Implnts in Feedlot Steers: Phse IIIB Studies in Nersk nd Texs Zoetis Florhm Prk, NJ 7932 Summry Two Phse IIIB studies 1,2 were conducted in feedlot
More informationPRESSURE LOSSES DUE TO THE LEAKAGE IN THE AIR DUCTS - A SAFETY PROBLEM FOR TUNNEL USERS?
- 7 - PRESSURE LOSSES DUE TO THE LEAKAGE IN THE AIR DUCTS - A SAFETY PROBLEM FOR TUNNEL USERS? Pucher Krl, Grz Uniersity of Technology, Austri E-Mil: pucherk.drtech@gmx.t Pucher Robert, Uniersity of Applied
More informationOwner s Man ual. For 4HPF/4HWF/4HBP Series Helical/Parallel, Helical/Worm, Helical/Bevel and Planetary Gear Power Winches
Red this Own er s Mn u l thor ough ly e fore op er t ing the equip ment. Keep it with the equip ment t ll times. Re plce ments re vil le from Thern, Inc., PO Box 347, Winon, MN 55987, 507-454-2996. www.thern.com
More informationValve Proving System VDK 200 A S02
Valve Proving System VDK 200 A S02 Valve proving system with the following approvals. UL Recognized File # MH17004 CSA Certified File # 1637485 CSA Requirement No. 4-01 (USA) Technical Information Letter
More information2017 Mercury Marine. Xi3 Wireless Edition. Operation Maintenance Installation Warranty Manual
2017 Mercury Mrine Xi3 Wireless Edition Opertion Mintennce Instlltion Wrrnty Mnul 8M0130831 1117 eng eng ORIGINAL LANGUAGE INSTRUCTIONS FCC nd IC Complince Sttement Xi SERIES WIRELESS FOOT PEDAL FCC ID
More informationAPPNA SPRING MEETING CHICAGO, ILLINOIS RETAIL BAZAAR REGISTRATION MARRIOTT DOWNTOWN MAGNIFICENT MILE 540 NORTH MICHIGAN AVENUE
1 PPN SPRING MEETING 2018 CHICGO, ILLINOIS PRIL 26 29, 2018 MRRIOTT DOWNTOWN MGNIFICENT MILE 540 NORTH MICHIGN VENUE RETIL ZR REGISTRTION 2 COMPNY NME CONTCT NME DDRESS RETIL ZR REGISTRTION PREFERRED PHONE
More informationExplosion-proof solenoid valves on/off and proportional controls - UL certification
www.atos.com Table E125-10/E Explosion-proof solenoid valves on/off and proportional controls - UL certification DLHZ-T-040 valve body ex-proof solenoid ex-proof transducer (only for proportional -T valves)
More informationTightness controls TC 1 3 and TC 4
Tightness controls TC 1 3 and TC 4 Test of both safety valves Short test period thanks to logical decision-making in the program sequence Adjustable test period which can be adapted to different systems
More informationExploring Impacts of Countdown Timers on Queue Discharge Characteristics of Through Movement at Signalized Intersections
Avilble online t www.sciencedirect.com ScienceDirect Procedi - Socil nd Behviorl Scienc es 96 ( 2013 ) 255 264 13th COTA Interntionl Conference of Trnsporttion Professionls (CICTP 2013) Exploring Impcts
More informationPressure reducing valves (with check valve) X(C)G, XGL
Pressure reducing vlves (with check vlve) X()G, XGL 3- Pressure ontrol Vlves unctionl Symbols XG XGL X XG X Vlve is used to set pressure in brnch circuit lower thn pressure of the circuit. y connecting
More informationInstructions. Electronic Aquarium Water Change System. Replenishing Water. Extracting Water. Includes instructions for:
Instructions Electronic Aqurium Wter Chnge System Includes instructions for: Replenishing Wter Extrcting Wter INTRODUCTION WHAT S INCLUDED The Aquplenish Wter Chnger conditions, monitors nd replenishes
More informationChapter 5. Triangles and Vectors
www.ck12.org Chpter 5. Tringles nd Vectors 5.3 The Lw of Sines Lerning Objectives Understnd how both forms of the Lw of Sines re obtined. Apply the Lw of Sines when you know two ngles nd non-included side
More informationRequirements for Reduced Supervision of Power Plants, Thermal Liquid Heating Systems, and Heating Plants
the pressure equipment safety authority Requirements for Reduced Supervision of Power Plants, Thermal Liquid Heating Systems, and Heating Plants AB-528 Edition 2, Revision 1 Issued 2016-09-12 Table of
More informationMinnesota Manual on Uniform Traffic Control Devices
Minnesot Mnul on Uniform Trffic Control Devices MN MUTCD Jnury 2014 MINNESOTA MANUAL ON UNIFORM TRAFFIC CONTROL DEVICES MN MUTCD Jnury 2014 Minnesot Deprtment of Trnsporttion Office of Trffic, Sfety,
More informationGas Flow Monitor, Model CMG for Butane and Propane
No. CP-SS-1782E Gas Flow Monitor, Model CMG for utane and Propane Overview The CMG Gas Flow Monitor is a flowmeter for measuring the fuel flow rate of gas burners. It incorporates a thermal microflow sensor
More informationOpen Access Regression Analysis-based Chinese Olympic Games Competitive Sports Strength Evaluation Model Research
Send Orders for Reprints to reprints@benthmscience.e The Open Cybernetics & Systemics Journl, 05, 9, 79-735 79 Open Access Regression Anlysis-bsed Chinese Olympic Gmes Competitive Sports Strength Evlution
More informationContents TRIGONOMETRIC METHODS PROBABILITY DISTRIBUTIONS
ontents UNIT 7 TRIGONOMETRI METHODS Lesson 1 Trigonometric Functions................... 462 1 onnecting ngle Mesures nd Liner Mesures.............. 463 2 Mesuring Without Mesuring.........................
More information2014 WHEAT PROTEIN RESPONSE TO NITROGEN
2014 WHEAT PROTEIN RESPONSE TO NITROGEN Aron Wlters, Coopertor Ryford Schulze, Coopertor Dniel Hthcot, Extension Progrm Specilist Dr. Clrk Neely, Extension Stte Smll Grins Specilist Ryn Collett, Extension
More informationOwners Manual Bottle Filler Freeze Resistant Tubular Fountain & Pet Fountain with 98837C Dual Valve Control Assembly
LK Owners Manual 4420 Bottle Filler Freeze Resistant Tubular Fountain & Pet Fountain with 98837C Dual Valve Control ssembly MODEL 4420BF1UDBFR MODEL 4420BF1LDBFR ITLLER 4420DBBFFR Fountains are among the
More informationFully insulated, heavy-gauge steel cabinet stage or single-stage thermostats
GMV8 / GV8 Heating Input: 60,000 100,000 TU/h omfortnet -ompatible Two-Stage, Variable-Speed Gas Furnace 80% FUE ontents Nomenclature... 2 Product Specifications... 3 imensions... 5 irflow ata... 7 Wiring
More information90-8M eng. Xi5 Wireless Edition Mercury Marine
2014 Mercury Mrine Xi5 Wireless Edition eng 90-8M0097265 814 eng ORIGINAL LANGUAGE INSTRUCTIONS FCC nd IC Complince Sttement Xi5 WIRELESS FOOT PEDAL FCC ID MVU09291 Xi5 WIRELESS REMOTE FCC ID MVU09305
More informationCALEFFI. Ball zone valves. series /03 GB
all zone valves series cert. n ISO / Function Zone valves are used to automatically shut-off the flow of carrier fluid distributed to a system. Specifically: -In central heating systems, they support the
More informationPCT MINIMUM DOCUMENTATION
Ref.: PCT Minimum Documenttion pge: 4.1.1 PCT MINIMUM TION INVENTORY S CCORDING TO PCT RULE 34.1 (PERIOD FROM 1920 TO 2000) Explntory Notes 1. On the following pges is given the inventory of ptent documents,
More informationDM80VC / DC80VC. Two-Stage Variable Speed Gas Furnace 80% AFUE. Heating Input: 60, ,000 BTU/h
M80V / 80V Two-Stage Variable Speed Gas Furnace 80% FUE Heating Input: 60,000 100,000 TU/h ontents Nomenclature...2 Product Specifications...3 imensions...5 irflow ata...7 Wiring iagram...14 ccessories...15
More informationLK4420BFFR - FTN, 4420BFFR - FTN. Owners Manual
Owners Manual 4420 Bottle Filler Freeze Resistant Tubular Fountain with 98837C or 98838C Dual Valve Control ssembly MODEL 4420BF1LFR MODEL 4420BF1UFR MODEL 4420BF2FR ITLLER 4420BFFR Fountains are among
More informationSome models are supplied with a protective film on steel and aluminium parts. This film must be removed before installing/using the appliance.
GS/ELECTRIC RNGE for residential use only Models: VEFSGE 304 SC.. R INSTLLTION INSTRUCTIONS IMPORTNT - PLESE RED ND FOLLOW efore beginning, please read these instructions completely and carefully. Do not
More informationEMBASSY SWIMMING POOL & FITNESS SUITE Fitness Programme June - September 2017
EMBASSY POOL & FITNESS SUITE Fitness Progrmme June - September 2017 7m Sturdy dy dy sdy nesdy sdy dy 7m - using the benefits of wter resistnce for low impct crdio nd muscle toning workout tht cn suit wide
More informationVGD40.../VGD41... Double gas valves. Building Technologies Division
7 631 VGD20... Double gas valves VGD40.../VGD41... VGD2... VGD4... Double gas valves of class A for integration into gas trains Safety shutoff valves conforming to EN 161 in connection with SKPx5... actuators
More informationWorking Paper: Reversal Patterns
Remember to welcome ll ides in trding. AND remember to reserve your opinion until you hve independently vlidted the ide! Working Pper: Reversl Ptterns Working Pper In this pper I wnt to review nd (hopefully)
More informationDual fuel Gas-Oil/Gas burner
Installation, use and maintenance instructions Dual fuel Gas-Oil/Gas burner MODEL GI/EMME 400 TYPE 496 T80 291 (6) TECHNICAL FEATURES Thermal power 116/232 465 kw - 100.000/200.000 400.000 kcal/h Fuels
More informationEx-proof solenoid valves with spool position monitor on/off, with inductive proximity sensor - Multicertification ATEX, IECEx, EAC
www.atos.com Table -2/E Ex-proof solenoid valves with spool position monitor on/off, with inductive proximity sensor - Multicertification TEX, IEEx, E valve body spool ex-proof solenoid ex-proof inductive
More informationHazard Identification Based on Plant Functional Modelling
^K*tS> 3t?>:b Risø-R-712^$ Hzrd Identifiction Bsed on Plnt Functionl odelling Birgitte Rsmussen, ris Whetton Risø Ntionl Lbortory, Roskilde, Denmrk October 1993 Hzid Identifiction Bsed on Plnt Functionl
More information