: Phenyl Trimethicone Relevant identified uses of the substance or mixture and uses advised against

Transcription

1 Revision date Date of issue 08/20/2014 Version 4.1 SECTION 1 Identification 1.1. Product identifier Product form Substance name INCI Name CAS No. Substance Phenyl Trimethicone Relevant identified uses of the substance or mixture and uses advised against Use of the substance/mixture Cosmetics, personal care products 1.3. Details of the supplier of the safety data sheet NuSil Technology LLC 1050 Cindy Lane Carpinteria, California USA (805) ehs@nusil.com Emergency telephone number Emergency number CHEMTREC (in US); CHEMTREC (International and Maritime) SECTION 2 Hazards identification The hazards associated with this product only apply if it is in an aerosolized form Classification of the substance or mixture Classification (GHS-US) Acute Tox. 2 (Inhalationdust,mist) H Label elements GHS-US labeling Hazard pictograms (GHS-US) GHS06 Signal word (GHS-US) Hazard statements (GHS-US) Precautionary statements (GHSUS) Danger H330 - Fatal if inhaled P210 - Keep away from heat, hot surfaces, open flames, sparks. - No smoking P260 - Do not breathe mist, spray, vapors P271 - Use only outdoors or in a well-ventilated area P280 - Wear eye protection, protective clothing, protective gloves P284 - [In case of inadequate ventilation] wear respiratory protection P304+P340 - IF INHALED Remove person to fresh air and keep at rest in a position comfortable for breathing P310 - Immediately call a poison center/doctor P320 - Specific treatment is urgent (see Section 4) P370+P378 - In case of fire Use appropriate media to extinguish P403+P233 - Store in a well-ventilated place. Keep container tightly closed P403+P235 - Store in a well-ventilated place. Keep cool P405 - Store locked up 1/7

2 P501 - Dispose of contents/container according to local, regional, national, and international regulations 2.3. Other hazards Other hazards not contributing to the classification Exposure may aggravate those with pre-existing eye, skin, or respiratory conditions Unknown acute toxicity (GHS-US) SECTION 3 Composition/information on ingredients 3.1. Substance Name Name Silsesquioxanes, phenyl Product identifier (CAS No) % 100 Classification (GHS-US) Acute Tox. 2 (Inhalationdust,mist), H330 Full text of H-phrases see section Mixture Not applicable SECTION 4 First aid measures 4.1. Description of first aid measures First-aid measures general First-aid measures after inhalation First-aid measures after skin First-aid measures after eye First-aid measures after ingestion Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label if possible). Remove to fresh air and keep at rest in a position comfortable for breathing. Seek medical attention immediately. Rinse immediately with plenty of water. Remove contaminated clothing. Wash contaminated clothing before reuse. Obtain medical attention if irritation develops or persists. Rinse cautiously with water for at least 15 minutes. Remove lenses, if present and easy to do. Continue rinsing. Obtain medical attention. Do NOT induce vomiting. Rinse mouth. Immediately call a POISON CENTER or doctor/physician Most important symptoms and effects, both acute and delayed Symptoms/injuries Symptoms/injuries after inhalation Symptoms/injuries after skin Symptoms/injuries after eye Symptoms/injuries after ingestion Chronic symptoms Fatal if inhaled. Fatal if inhaled. May cause skin irritation. May cause eye irritation. Ingestion is likely to be harmful or have adverse effects. None expected under normal conditions of use Indication of any immediate medical attention and special treatment needed If you feel unwell, seek medical advice (show the label where possible). SECTION 5 Fire-Fighting measures 5.1. Extinguishing media Suitable extinguishing media Unsuitable extinguishing media Dry chemical powder, alcohol-resistant foam, carbon dioxide. Do not use a heavy water stream. Use of heavy stream of water may spread fire. Application of water stream to hot product may cause frothing and increase fire intensity. 2/7

3 5.2. Special hazards arising from the substance or mixture Fire hazard Explosion hazard Reactivity Not considered flammable but may burn at high temperatures. Product is not explosive. Hazardous reactions will not occur under normal conditions Advice for firefighters Precautionary measures fire Firefighting instructions Protection during firefighting Other information Exercise caution when fighting any chemical fire. Use water spray or fog for cooling exposed containers. Do not enter fire area without proper protective equipment, including respiratory protection. Refer to Section 9 for flammability properties. SECTION 6 Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures General measures Avoid all with skin, eyes, or clothing. Avoid breathing (vapor, mist, spray). Use special care to avoid static electric charges. Keep away from open flames, hot surfaces and sources of ignition. No smoking For non-emergency personnel Protective equipment Emergency procedures For emergency responders Protective equipment Emergency procedures Use appropriate personal protection equipment (PPE). Evacuate unnecessary personnel. Equip cleanup crew with proper protection. Stop leak if safe to do so. Eliminate ignition sources. Ventilate area Environmental precautions Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters Methods and material for containment and cleaning up For containment Methods for cleaning up Contain any spills with dikes or absorbents to prevent migration and entry into sewers or streams. Clear up spills immediately and dispose of waste safely. Spills should be contained with mechanical barriers. Transfer spilled material to a suitable container for disposal. Contact competent authorities after a spill Reference to other sections See Heading 8. Exposure controls and personal protection. SECTION 7 Handling and storage 7.1. Precautions for safe handling Additional hazards when processed Precautions for safe handling Hygiene measures Handle empty containers with care because residual vapors are flammable. Keep away from heat/sparks/open flames/hot surfaces. No smoking. No naked lights. No smoking. Handle in accordance with good industrial hygiene and safety procedures. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work Conditions for safe storage, including any incompatibilities Technical measures Storage conditions Incompatible products Storage area Comply with applicable regulations. Proper grounding procedures to avoid static electricity should be followed. Store in a dry, cool and well-ventilated place. Keep container closed when not in use. Keep/Store away from direct sunlight, extremely high or low temperatures and incompatible materials. Keep in fireproof place. Strong acids. Strong bases. Strong oxidizers. Store in a well-ventilated place. Keep cool. 3/7

4 7.3. Specific end use(s) Cosmetics, personal care products. SECTION 8 Exposure controls/personal protection 8.1. Control parameters No Occupational Exposure Limits (OELs) have been established for this product or its chemical components Exposure controls Appropriate engineering controls Personal protective equipment Materials for protective clothing Hand protection Eye protection Skin and body protection Respiratory protection Environmental exposure controls Consumer exposure controls Ensure adequate ventilation, especially in confined areas. Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. Ensure all national/local regulations are observed. Protective goggles. Gloves. Protective clothing. Insufficient ventilation wear respiratory protection. Chemically resistant materials and fabrics. Wear chemically resistant protective gloves. Chemical goggles or safety glasses. Wear suitable protective clothing. Use a NIOSH-approved respirator or self-contained breathing apparatus whenever exposure may exceed established Occupational Exposure Limits. Do not allow the product to be released into the environment. Do not eat, drink or smoke during use. SECTION 9 Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state Appearance Odor Odor threshold ph Relative evaporation rate (butyl acetate=1) Melting point Freezing point Boiling point Flash point Auto-ignition Temperature Decomposition temperature Flammability (solid, gas) Vapor pressure Relative vapor density at 20 C Relative density Specific Gravity Liquid Colorless Characteristic 109 C (228.2 F) /7

5 Solubility Water Insoluble Ethanol Soluble Lipids Soluble Others Not tested cst Partition coefficient n-octanol/water Viscosity SECTION 10 Stability and reactivity Reactivity Hazardous reactions will not occur under normal conditions Chemical stability Stable under recommended handling and storage conditions (see section 7) Possibility of hazardous reactions Hazardous polymerization will not occur Conditions to avoid Direct sunlight. Extremely high or low temperatures. Ignition sources. Incompatible materials Incompatible materials Strong acids. Strong bases. Strong oxidizers Hazardous decomposition products Carbon oxides (CO, CO2). Silicon oxides. SECTION 11 Toxicological information Information on toxicological effects Acute toxicity Fatal if inhaled. 20CST ATE (Dust/Mist) 0.5 mg/l/4h Silsesquioxanes, phenyl ( ) ATE (Dust/Mist) 0.5 mg/l/4h Skin corrosion/irritation Not classified Serious eye damage/irritation Not classified Respiratory or skin sensitization Not classified Germ cell mutagenicity Not classified Carcinogenicity Not classified Reproductive toxicity Not classified Specific target organ toxicity (single exposure) Not classified Specific target organ toxicity (repeated Not classified exposure) Aspiration hazard Not classified Symptoms/injuries after inhalation Fatal if inhaled. Symptoms/injuries after skin May cause skin irritation. Symptoms/injuries after eye May cause eye irritation. Symptoms/injuries after ingestion Ingestion is likely to be harmful or have adverse effects. Chronic symptoms None expected under normal conditions of use. 5/7

6 SECTION 12 Ecological information Toxicity Persistence and degradability Bioaccumulative potential Mobility in soil Other adverse effects Other information Avoid release to the environment. SECTION 13 Disposal considerations Waste treatment methods Waste disposal recommendations Dispose of waste material in accordance with all local, regional, national, and international regulations. Additional information Handle empty containers with care because residual vapors are flammable. Ecology - waste materials Avoid release to the environment. SECTION 14 Transport information In accordance with DOT / IMDG / IATA UN number Not regulated for transport UN proper shipping name Not regulated for transport Additional information Not regulated for transport SECTION 15 Regulatory information US Federal regulations Silsesquioxanes, phenyl ( ) Listed on the United States TSCA (Toxic Substances Control Act) inventory US State regulations International regulations Silsesquioxanes, phenyl ( ) Regional Legislation Listed on the AICS (Australian Inventory of Chemical Substances) Listed on the Canadian NDSL (Non-Domestic Substances List) Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China) Listed on NZIoC (New Zealand Inventory of Chemicals) Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances) Listed on the United States TSCA (Toxic Substances Control Act) inventory 6/7

7 SECTION 16 Other information, including date of preparation or last revision Revision date Other information This document has been prepared in accordance with the SDS requirements of the OSHA Hazard Communication Standard 29 CFR Full text of H-phrases see section 16 --Acute Tox. 2 (Inhalationdust,mist) ---H Acute toxicity (inhalationdust,mist) Category 2 Fatal if inhaled NFPA health hazard 3 - Short exposure could cause serious temporary or residual injury even though prompt medical attention was given. NFPA fire hazard 1 - Must be preheated before ignition can occur. NFPA reactivity 0 - Normally stable, even under fire exposure conditions, and are not reactive with water. We believe that the information contained herein is current as of the date of this, and is offered in good faith. Since the use of this information and of these opinions and the conditions of the use of the product are not within the control of NuSil Technology, it is the user's obligation to determine the conditions of safe use of the product. SDS US (GHS HazCom 2012) 7/7