: PAM / PAAM / Polyacrylamides / Acrylamide, polymers / poly(2-propenamide) / poly(1- carbamoylethylene)

Transcription

1 SECTION 1: Identification 1.1. Identification Product form Polyacrylamide 10% in water MW Date of issue: 06/20/2017 Revision date: 07/05/2017 Supersedes: 06/20/2017 Version: 1.1 : Mixtures Product name : Polyacrylamide 10% in water MW Product code : Formula Synonyms 1.2. Recommended use and restrictions on use Recommended use 1.3. Supplier Supplier Polysciences Inc 400 Valley Road Warrington, PA United States T (215) F (215) info@polysciences.com Emergency telephone number : (C3H5NO)n : PAM / PAAM / Polyacrylamides / Acrylamide, polymers / poly(2-propenamide) / poly(1- carbamoylethylene) : Manufacture of substances,use as laboratory reagent,scientific research and development Emergency number : (215) SECTION 2: Hazard(s) identification 2.1. Classification of the substance or mixture GHS-US classification Not classified 2.2. GHS Label elements, including precautionary statements GHS-US labelling No labelling applicable 2.3. Other hazards which do not result in classification 2.4. Unknown acute toxicity (GHS US) SECTION 3: Composition/information on ingredients 3.1. Substances 3.2. Mixtures Name Product identifier % Water (CAS-No.) Polyacrylamide (CAS-No.) Comments : Contains small amounts ( %) of formalin as fungicide SECTION 4: First-aid measures 4.1. Description of first aid measures First-aid measures general First-aid measures after inhalation First-aid measures after skin contact : Get medical advice/attention if you feel unwell. : Remove person to fresh air and keep comfortable for breathing. Get medical advice/attention if you feel unwell. : After contact with skin, take off immediately all contaminated clothing, and wash immediately with plenty of water. 07/06/2017 EN (English) Page 1

2 First-aid measures after eye contact First-aid measures after ingestion 4.2. Most important symptoms and effects (acute and delayed) 4.3. Immediate medical attention and special treatment, if necessary Treat symptomatically. SECTION 5: Fire-fighting measures 5.1. Suitable (and unsuitable) extinguishing media Suitable extinguishing media 5.2. Specific hazards arising from the chemical Reactivity : Rinse eyes with water as a precaution. Remove contact lenses, if present and easy to do. Continue rinsing. : Rinse mouth out with water. Call a poison center or a doctor if you feel unwell. : Water spray. Dry powder. Foam. Carbon dioxide Special protective equipment and precautions for fire-fighters Protection during firefighting SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures : The product is non-reactive under normal conditions of use, storage and transport. : Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing For non-emergency personnel Emergency procedures For emergency responders Protective equipment : Ventilate spillage area. : Do not attempt to take action without suitable protective equipment. For further information refer to section 8: "Exposure controls/personal protection" Environmental precautions Avoid release to the environment. Prevent entry to sewers and public waters Methods and material for containment and cleaning up Methods for cleaning up : Take up liquid spill into absorbent material. Other information : Dispose of materials or solid residues at an authorized site Reference to other sections For further information refer to section 13. SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling Hygiene measures : Ensure good ventilation of the work station. Wear personal protective equipment. : Do not eat, drink or smoke when using this product. Always wash hands after handling the product Conditions for safe storage, including any incompatibilities Storage conditions SECTION 8: Exposure controls/personal protection 8.1. Control parameters : Store in a well-ventilated place. Keep cool. Keep container tightly closed Appropriate engineering controls Appropriate engineering controls Environmental exposure controls : Ensure good ventilation of the work station. : Avoid release to the environment Individual protection measures/personal protective equipment 07/06/2017 EN (English) 2/5

3 Hand protection: Protective gloves Eye protection: Safety glasses Skin and body protection: Wear suitable protective clothing Respiratory protection: In case of insufficient ventilation, wear suitable respiratory equipment SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state : Liquid Appearance : Colorless, viscous liquid. Colour : Colourless. Odour : Odourless. Odour threshold ph Melting point : Freezing point Boiling point Flash point Relative evaporation rate (butylacetate=1) Flammability (solid, gas) :. Vapour pressure Relative vapour density at 20 C Relative density Solubility Log Pow Auto-ignition temperature Decomposition temperature Viscosity, kinematic Viscosity, dynamic Explosive limits Explosive properties Oxidising properties 9.2. Other information SECTION 10: Stability and reactivity Reactivity The product is non-reactive under normal conditions of use, storage and transport Chemical stability Stable under normal conditions Possibility of hazardous reactions No dangerous reactions known under normal conditions of use Conditions to avoid None under recommended storage and handling conditions (see section 7) Incompatible materials Oxidizing agent. 07/06/2017 EN (English) 3/5

4 10.6. Hazardous decomposition products Under normal conditions of storage and use, hazardous decomposition products should not be produced. SECTION 11: Toxicological information Information on toxicological effects Acute toxicity Polyacrylamide 10% in water MW > 1 g/kg LC50 inhalation rat (mg/l) Skin corrosion/irritation Serious eye damage/irritation Respiratory or skin sensitisation Germ cell mutagenicity Carcinogenicity Reproductive toxicity Specific target organ toxicity (single exposure) Specific target organ toxicity (repeated exposure) Aspiration hazard > 1 g/kg > 90 ml/kg SECTION 12: Ecological information Toxicity Persistence and degradability Persistence and degradability Not established Bioaccumulative potential Mobility in soil Other adverse effects Effect on the global warming GWPmix comment : No known effects from this product. : No known effects from this product. SECTION 13: Disposal considerations Disposal methods Waste treatment methods : Dispose of contents/container in accordance with licensed collector s sorting instructions. SECTION 14: Transport information Department of Transportation (DOT) In accordance with DOT 07/06/2017 EN (English) 4/5

5 Transportation of Dangerous Goods Transport by sea Air transport SECTION 15: Regulatory information US Federal regulations Listed on the United States TSCA (Toxic Substances Control Act) inventory EPA TSCA Regulatory Flag XU - XU - indicates a substance exempt from reporting under the Inventory Update Reporting Rule, i.e, Partial Updating of the TSCA Inventory Data Base Production and Site Reports (40 CFR 710(C)). Listed on the United States TSCA (Toxic Substances Control Act) inventory International regulations Listed on the TCSI (Taiwan Chemical Substance Inventory) Listed on the TCSI (Taiwan Chemical Substance Inventory) US State regulations SECTION 16: Other information Revision date : 07/05/2017 SDS US Polysciences This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product 07/06/2017 EN (English) 5/5