Material Safety Data Sheet

Transcription

1 Material Safety Data Sheet STAIN BLASTER R 1. Product and company identification Trade name of product Product use STAIN BLASTER R Laundry product Product dilution information Not applicable Supplier's information Code Date of issue 2. Physical state Emergency overview Ecolab Co. 515 Tomken Road Mississauga ON L4W 2X February-213 EMERGENCY HEALTH INFORMATION Outside United States and Canada CALL (in USA) Hazards identification Routes of entry Skin contact, Eye contact, Inhalation, Ingestion Potential acute health effects Eyes Corrosive to eyes. Skin MAY BE HARMFUL IF ABSORBED THROUGH SKIN. Severely irritating to the skin. Inhalation Severely irritating to the respiratory system. Ingestion Liquid. DANGER! CAUSES DIGESTIVE TRACT AND EYE BURNS. CAUSES RESPIRATORY TRACT AND SKIN IRRITATION. HARMFUL IF SWALLOWED. MAY BE HARMFUL IF ABSORBED THROUGH SKIN. Do not ingest. Do not get in eyes. Avoid contact with skin and clothing. Avoid breathing vapours, spray or mists. Keep container closed. Use only with adequate ventilation. Wash thoroughly after handling. Harmful if swallowed. Causes burns to mouth, throat and stomach. See toxicological information (Section 11) 3. Composition/information on ingredients Name CAS number % by weight OXALIC ACID ethanol, 2-amino-, ethanedioate (21) (salt) Name CAS number % by weight 1/6

2 4. Eye contact Skin contact Inhalation Ingestion 5. First-aid measures In case of contact, immediately flush eyes with cool running water. Remove contact lenses and continue flushing with plenty of water for at least 15 minutes. Get medical attention immediately. In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Apply calcium gluconate gel, if available, or milk of magnesia to affected area. Get medical attention immediately. Wash clothing before reuse. Clean shoes thoroughly before reuse. If inhaled, remove to fresh air. If exposed person is not breathing, give artificial respiration or oxygen applied by trained personnel. Get medical attention. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention immediately. If available, take several calcium antacid tablets (eg Tums) or several tablespoons of milk of magnesia. Fire-fighting measures Auto-ignition temperature Flammable limits Hazardous thermal decomposition products Special remarks on fire hazards Special remarks on explosion hazards Fire-fighting media and instructions Special protective equipment for fire-fighters 6. Personal precautions Environmental precautions Methods for cleaning up Decomposition products may include the following materials carbon dioxide carbon monoxide nitrogen oxides Accidental release measures Use an extinguishing agent suitable for the surrounding fire. Dyke area of fire to prevent runoff. In a fire or if heated, a pressure increase will occur and the container may burst. Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode. Use personal protective equipment as required. Avoid contact of spilt material and runoff with soil and surface waterways. Use a water rinse for final clean-up. 2/6

3 7. Handling Storage 8. Engineering measures Handling and storage Do not ingest. Do not get in eyes, on skin, or on clothing. Do not breathe vapour or spray. Keep container closed. Use only with adequate ventilation. Wash thoroughly after handling. Do not mix with bleach or other chlorinated products - will cause chlorine gas. Keep out of reach of children. Store in a closed container. Keep container tightly closed. Store between the following temperatures and 5 C Exposure controls/personal protection Personal protection Eyes Use chemical splash goggles. For continued or severe exposure wear a face shield over the goggles. Hands Use chemical-resistant, impervious gloves. Skin Respiratory Use only with adequate ventilation. If user operations generate dust, fumes, gas, vapour or mist, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits. Provide suitable facilities for quick drenching or flushing of the eyes and body in case of contact or splash hazard. Wear suitable protective clothing. Wear appropriate respirator when ventilation is inadequate and occupational exposure limits are exceeded. Occupational exposure limits TWA (8 hours) STEL (15 mins) Ceiling Ingredient List name ppm mg/m³ Other ppm mg/m³ Other ppm mg/m³ Other Notations oxalic acid US ACGIH 3/ AB 4/ [3] BC 4/ ON 7/ QC 9/ [3]Skin sensitisation 9. Physical and chemical properties Physical state Liquid. Flash point > 1 C Product does not support combustion. Colour Colourless. Odour Odourless ph 1 [Conc. (% w/w) 1%] Boiling/ condensation point Melting/freezing point 3/6

4 9. Physical and chemical properties Relative density Vapour pressure Vapour density Odour threshold Evaporation rate Viscosity Dispersibility properties Solubility LogKow Easily dispersible in the following materials cold water and hot water. Easily soluble in the following materials cold water and hot water. Stability and reactivity Stability Conditions of instability Reactivity Hazardous decomposition products Hazardous polymerisation 11. Toxicity data Toxicological information Potential acute health effects Eyes Corrosive to eyes. Skin Inhalation Ingestion Reproductive effects Sensitization to Product Synergistic products (toxicologically) The product is stable. Under normal conditions of storage and use, hazardous polymerisation will not occur. Extremely reactive or incompatible with the following materials alkalis. Do not mix with bleach or other chlorinated products - will cause chlorine gas. Under normal conditions of storage and use, hazardous decomposition products should not be produced. Under normal conditions of storage and use, hazardous polymerisation will not occur. Product/ingredient name Test Route Result Species Other adverse effects Target organs MAY BE HARMFUL IF ABSORBED THROUGH SKIN. Severely irritating to the skin. Severely irritating to the respiratory system. Harmful if swallowed. Causes burns to mouth, throat and stomach. Potential chronic health effects Carcinogenic effects No known significant effects or critical hazards. Mutagenic effects No known significant effects or critical hazards. Teratogenic effects No known significant effects or critical hazards. No known significant effects or critical hazards. No known significant effects or critical hazards. 4/6

5 Toxicological information Ecological information Contains material which causes damage to the following organs the nervous system, heart. Contains material which may cause damage to the following organs kidneys, mucous membranes, gastrointestinal tract, upper respiratory tract, central nervous system (CNS), nose/sinuses, throat. Ecotoxicity Not reported 13. Disposal considerations Waste disposal Avoid disposal. Attempt to use product completely in accordance with intended use. Disposal should be in accordance with applicable regional, national and local laws and regulations. 14. Transport information Certain shipping modes or package sizes may have exceptions from the transport regulations. The classification provided may not reflect those exceptions and may not apply to all shipping modes or package sizes. TDG TDG Classification TDG Proper shipping name Class 8 Packing group IMO/IMDG UN3265 CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (oxalic acid) III IMO/IMDG Classification IMO/IMDG Proper shipping name Class Packing group UN3265 CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (oxalic acid) 8 III For transport in bulk, see shipping documents for specific transportation information. 15. Regulatory information WHMIS Class D-1B Material causing immediate and serious toxic effects (Toxic). Class E Corrosive material Canada inventory At least one component is not listed in DSL but all such components are listed in NDSL. This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS contains all the information required by the Controlled Products Regulations. 5/6

6 16. Other information Hazardous Material Information System (U.S.A.) Health Flammability Physical hazards * 3 National Fire Protection Association (U.S.A.) Health 3 Flammability Instability/Reactivity Special Date of issue Responsible name 25-February-213 Regulatory Affairs Indicates information that has changed from previously issued version. Notice to reader The above information is believed to be correct with respect to the formula used to manufacture the product in the country of origin. As data, standards, and regulations change, and conditions of use and handling are beyond our control, NO WARRANTY, EXPRESS OR IMPLIED, IS MADE AS TO THE COMPLETENESS OR CONTINUING ACCURACY OF THIS INFORMATION. 6/6