SAFETY DATA SHEET. Safe Heet Thermoconductive Adhesive Part B. Page 1 of 5

Transcription

1 SAFETY DATA SHEET Product: Revision Date: 6/01/2015 Safe Heet Thermoconductive Adhesive Part B 1. MATERIAL IDENTIFICATION Product Name: Safe Heet Thermoconductive Adhesive Part B Product Description: Epoxy Resin Mixture, Aluminum Colored, And Slight Odor Product Use: High Performance Thermally Conductive Adhesive Resin Manufacturer: McFarlane Aviation, Inc. 696 E Road Baldwin City, KS Telephone: Emergency Phone: HAZARDS IDENTIFICATION GHS Classification: Aquatic Chronic Category 2 Skin Irritation Category 2 Eye Irritation Category 2A Skin Sensitization Category 1 GHS Label Elements: GHS Signal Word: Warning GHS Hazard Determining Component: Epoxy Resin Stabilized Aluminum GHS Hazard Statements for Health Hazards: H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H411 Toxic to aquatic life with long lasting effects. GHS Precautionary Statements - Prevention: P261 Avoid breathing vapors. P264 Wash hands thoroughly after handling. P273 Avoid release to the environment. P280 Wear protective gloves. GHS Precautionary Statements Response: P302+P352 IF ON SKIN: Wash with plenty of soap and water. P332+P313 If skin irritation occurs, get medical attention. P362 Take off contaminated clothing and wash before reuse. P391 Collect spillage. GHS Storage/Disposal: P405 Store locked up. P501 Dispose in accordance with local, regional, national or international regulations. Page 1 of 5

2 3. COMPOSITION Note This product is a paste mixture and all powders are encapsulated. 4. FIRST AID MEASURES Eye Exposure: Hold eyelids open and flush with a steady, gentle stream of water for at least 15 minutes. Seek immediate medical attention, preferably with an ophthalmologist. If a physician is not immediately available, eye irrigation should be continued for an additional 15 minutes. Skin Exposure: Immediately wipe excess material off skin with a dry cloth then wash with plenty of soap and water for at least 5 minutes. See medical attention if irritation develops or persists. Remove contaminated clothing and shoes and clean thoroughly before re-use. Inhalation: Remove from immediate source of exposure and assure that victim is breathing. If not breathing, administer cardio-pulmonary resuscitation (CPR). If breathing is difficult, administer oxygen if available. Seek medical attention. Symptoms can be delayed several hours. Ingestion: If swallowed, do not induce vomiting. If victim is conscious and alert, give 1-2 glasses of milk or water to drink. Do not give anything by mouth to an unconscious person. Seek medical attention immediately. Do not leave victim unattended. To prevent aspiration of swallowed product, lay victim on side with head lower than waist. Vomiting may occur spontaneously. If vomiting occurs and the victim is conscious, give additional milk or water to further dilute the chemical. Medical Conditions Possibly Aggravated by Exposure: Inhalation of product may aggravate existing chromic respiratory problems such as asthma, emphysema or bronchitis. Skin contact may aggravate existing skin disease. 5. FIRE FIGHTING MEASURES Flash Point: > 300 of (closed cup) Flammable Limits: Not available. Auto-Ignition Temperature: Not available. Extinguishing Media: Use carbon dioxide, dry chemical, or appropriate foam. Special Fire Fighting Procedures: Firefighters should wear NIOSH/MSHA approved positive pressure breathing apparatus with full face-piece and full chemical resistant protective clothing. Dike area to prevent runoff and contamination of water sources. Dispose of fire control water later. Extreme heat or water contamination may cause closed containers to explode. 6. ACCIDENTAL RELEASE MEASURES Personal Protection: Wear chemical goggles, body-covering protective clothing, chemical resistant gloves, and rubber boots. Use NIOSH approved respirator where mist occurs. Spill Cleanup: Mop up liquid and dispose in accordance with federal, state and local regulations or permits. Flush area with solvent then water to complete cleanup. 7. HANDLING AND STORAGE Handling: Avoid contact with eyes, skin and clothing. Avoid breathing vapors. Keep container closed. Promptly clean residue from closures with cloth and solvent. Promptly clean up spills. Storage: Store at room temperature in a dry, well ventilated area, away from combustible material, and away from ignition sources. Keep containers closed. Store in clean plastic or steel containers. Page 2 of 5

3 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering Controls: Normal ventilation for good working conditions should be used. Keep containers closed. Safety shower and eyewash fountain should be within direct access. Respiratory Protection: This product is not considered respirable in either the liquid or cured forms. However, if the cured product is polished, ground or chipped during processing, handling or use, powders may be released as airborne respirable particles. In these instances, appropriate personal protection equipment and local ventilation controls must be employed. If exposure limits are exceeded and local ventilation is unavailable, a supplied-air respirator or a self-contained NIOSH-approved vapor respirator is required. Skin Protection: Wear body-covering protective clothing and gloves. Eye Protection: Wear chemical goggles or face shield. 9. PHYSICAL AND CHEMICAL PROPERTIES Form: Paste Color: Aluminum Odor: Slight Ether Odor Odor Threshold: Not Determined ph: Not Determined Melting Point Range: Not Determined Boiling Point Range: Not Determined Flash Point: > 300 of (closed cup) Flammability (solid, gaseous): Not Applicable Decomposition Temperature: Not Determined Auto Igniting: Product is not self-igniting Danger of Explosion: Product does not present an explosion hazard Explosion Limits Lower: Not Determined Upper: Not Determined Vapor Pressure (mm Hg): < 25 oc Density: oc Relative Density: Not Determined Vapor Density: Not Determined Evaporation Rate: Not Determined Evaporation Rate: Not Determined Solubility in / Miscibility Water: Not miscible or difficult to mix Partition Coefficient (n-octanol/water): Not Determined Viscosity, Dynamic: Not Determined Viscosity, Kinematic: Not Determined Volatile Organic Compounds: 0.00 g/l 10. STABILITY AND REACTIVITY Chemical Stability: This material is stable under normal conditions of use and storage. Conditions to Avoid: Storage temperatures above 100 oc Hazardous Polymerization: Will not occur. Hazardous Decomposition Products: Carbon monoxide, carbon dioxide, aldehydes, and other organic substances. 11. TOXICOLOGICAL INFORMATION Acute Toxicity: Primary Irritant Effect: Skin: Irritant to skin and mucous membranes Eye: Irritating effect Sensitization: Sensitization possible through skin contact Carcinogenic Effects: The product does not contain any ingredient designated by IARC, NTP, ACGIH or OSHA as probable or suspected human carcinogens. Page 3 of 5

4 12. ECOLOGICAL INFORMATION Aquatic Toxicity: No further relevant information available. Persistence & Degradability: No further relevant information available. Bioaccumulative Potential: No further relevant information available. Mobility in Soil: No further relevant information available. Ecotoxicity: Toxic for fish. General Notes: Water hazard class 2 (self-assessment): Hazardous for water. Do not allow product to reach ground water, water course or sewage system. Dangerous to drinking water even if small quantities leak into the ground. Poisonous to fish and plankton. Toxic to aquatic organisms. Results of PBT & vpvb Assessment: PBT: Not applicable. VPvB: Not applicable Other Adverse Effects: No further information available. 13. DISPOSAL CONSIDERATIONS Disposal: Keep out of surface waters, sewers, and waterways entering or leading to surface waters. Notify authorities if any exposure to the environment occurs or is likely to occur. Utilize an appropriate disposal facility, in compliance with federal, state and local environmental control regulations. 14. TRANSPORTATION INFORMATION DOT UN Status: The material is not a regulated hazardous material for transportation. 15. REGULATORY INFORMATION U.S. Federal Regulations CERCLA: No CERCLA reportable quantity has been established for this material. TSCA: All ingredients of this material are listed on the TSCA inventory. SARA Title III Sections 302, 304, 313: This product does not contain any substances reportable under these sections. Sections 311, 312: Hazard Classes Yes/No Fire Hazard No Reactivity Hazard No Pressure Hazard No Immediate Hazard Yes Delayed Hazard No International Inventory Status Canada (DSL) Yes Europe (EINECS/ELINCS) Yes Australia (AICS) Yes Japan (MITI) Yes South Korea (KECL) Yes 16. OTHER INFORMATION Page 4 of 5

5 Key Legend Information ACGIH American Conference of Governmental Industrial Hygienists ARD International Agency for Research on Cancer CAS Chemical Abstract Service CERCLA Comprehensive Environmental Response, Compensation & Liability Act DSL Domestic Substance List EC European Commission HMIS Hazardous Materials Identification System IARC International Agency for Research on Cancer ND Not Determined NE Not Established NFPA National Fire Protection Association NIOSH National Institute for Occupational Safety & Health NTP National Toxicology Program OSHA Occupational Safety and Health Administration PEL Permissible Exposure Limit RE Repeat Exposure SARA Superfund Amendments & Reauthorization Act SARA Title III Emergency Planning & Community Right to Know Act SARA Section 302 Extremely Hazardous Substances SARA Section 302 Extremely Hazardous Substances SARA Section 304 Emergency Release SARA Section 311 MSDS/List of Chemicals & Hazardous Inventory SARA Section 312 Emergency & Hazardous Inventory SARA Section 313 Toxic Chemicals & Release Reporting SE Single Exposure STEL Short Term Exposure Limit STOT Specific Target Organ Toxicity TLV Threshold Limit Value TWA Time Weighted Average Disclaimer: The information contained herein is based on data taken from sources believed to be both current and reliable at the time of publication. McFarlane Aviation, Inc. makes no warranty, expressed or implied, as to the accuracy of this MSDS and assumes no liability arising from its use by others. Compliance with all applicable Federal, State and Local laws and regulations remains the responsibility of the user. Page 5 of 5