Product Data Screwed Valves
|
|
|
- Nicholas McGee
- 5 years ago
- Views:
Transcription
1 Screwed Valves Brass and Chrome PVC Stainless Steel Flow Control Check Valves - 15mm Flow Control Check Valves - 25mm AUSTRALIA
2 Maric Brass & Chrome Screwed Valves p. 28 Availability & Specifications Maric Flow Control Valves B A Body Sizes Configurations Availability First letter specifies inlet See all Available s below 6mm ( 1 /4 ) F&F from 0.4 to 9 l/m 10mm F&F from 0.4 to 9 l/m 15mm F&F, M&F, F&M from 0.4 to 23 l/m 20mm F&F, M&F, F&M from 0.4 to 54 l/m 25mm F&F, M&F, F&M from 0.4 to 114 l/m 32mm F&F from 0.4 to 233 l/m 40mm F&F from 0.4 to 233 l/m 50mm F&F from 0.4 to 342 l/m Dimensions & Weights Nominal size 1/ A/F Dimension A FF Body Length B MF Body Length C FM Body Length D Approx Weight Kg F&F C M&F D F&M (Refer also to available; Control Rubbers Precision) Pressure Differential Range kpa with Precision Rubbers fitted. (Higher DP options available) Accuracy +/- 10% Available s.4 /.45 /.5 /.55 /.63 /.7 /.8 /.9 / 1.0 / 1.1 / 1.2 / 1.3 / 1.5 / 1.6 / 1.8 / 2.0 / 2.3 / 2.5 / (litres/min) 2.8 / 3.2 / 3.5 / 4.0 / 4.5 / 5.0 / 5.5 / 6.3 / 7.0 / 8.0 / 9.0 / 10 / 11 / 12 / 13 / 15 / 16 / 18 / 20 / 23 / 25 / 28 / 32 / 36 / 41 / 45 / 49 / 54 / 59 / 66 / 73 / 82 / 91 / 102 / 114 / 125 / 138 / 150 / 162 / 180 / 199 / 216 / 233 lpm up to 342 lpm Kwyflo flow rate options, (quiet design) are limited to the flows listed in underlined bold type Materials Body DR Brass to AS1562 alloy 352 (plus chrome plating if applicable) Chrome plated valves are available in most 15, 20 & 25mm body sizes Construction Assembly Valves comply to Australian Technical Standards ATS & AS4020 Threads BSPT to AS ISO Male Series R, Female RP Max Pressure Differential Max Temperature Compatible Control Rubbers Specifying valves 1500 kpa (for N6 and EP rubbers only) 6000 kpa 60 o C for Nitrile control rubbers, 100 o C for EPDM Standard Precision P (Non Standard LP, N6, EP, S, V, K, HF) When ordering these valves, please be sure to specify; Body size Thread configuration Body material Control rubber material and pressure differential range - if other than Precision
3 Maric PVC Screwed Valves p. 29 Availability & Specifications Maric Flow Control Valves Body Sizes Configurations Availability See all Available s below 6mm ( 1 /4 ) F&F from 0.4 to 9 l/m 15mm F&F from 0.4 to 23 l/m 20mm F&F from 0.4 to 54 l/m 25mm F&F from 0.4 to 114 l/m 32mm F&F from 0.4 to 233 l/m 40mm F&F from 0.4 to 233 l/m 50mm F&F from 0.4 to 342 l/m B F&F only A Dimensions & Weights Nominal size 1/ A/F Dimension A FF Body Length B Approx Weight Kg (Refer also to available; Control Rubbers Precision) Pressure Differential Range kpa Accuracy +/- 10% Available s.4 /.45 /.5 /.55 /.63 /.7 /.8 /.9 / 1.0 / 1.1 / 1.2 / 1.3 / 1.5 / 1.6 / 1.8 / 2.0 / 2.3 / 2.5 / (litres/min) 2.8 / 3.2 / 3.5 / 4.0 / 4.5 / 5.0 / 5.5 / 6.3 / 7.0 / 8.0 / 9.0 / 10 / 11 / 12 / 13 / 15 / 16 / 18 / 20 / 23 / 25 / 28 / 32 / 36 / 41 / 45 / 49 / 54 / 59 / 66 / 73 / 82 / 91 / 102 / 114 / 125 / 138 / 150 / 162 / 180 / 199 / 216 / 233 lpm up to 342 lpm Kwyflo flow rate options, (quiet design) are limited to the flows listed in underlined bold type Materials Body UPVC compliant with AS4020 drinking water requirements Construction Assembly Valves comply to Australian Technical Standards ATS Threads BSP to AS ISO Series RP (Parallel) Max Pressure Differential Max Temperature Compatible Control Rubbers Specifying valves 1000 kpa, or limited by Control Rubber type 3000 kpa 50 o C Standard Precision P (Non Standard LP, EP, V, K, HF) When ordering these valves, please be sure to specify; Body size Thread configuration Body material Control rubber material and pressure differential range - if other than Precision
4 Maric Stainless Steel Screwed Valves p. 30 Availability & Specifications Maric Flow Control Valves Body Sizes BSP Configurations NPT Configurations Availability First letter specifies inlet First letter specifies inlet See all Available s below 6x3mm (1/4 x 1/8 ) F&M - from 0.4 to 9 l/m 6mm (1/4 ) F&F, F&M F&F from 0.4 to 9 l/m 10mm M&F F&F from 0.4 to 9 l/m 15mm F&F, M&F, F&M F&F from 0.4 to 23 l/m 20mm F&F F&F from 0.4 to 54 l/m 25mm F&F, M&F, F&M F&F from 0.4 to 114 l/m 32mm F&F F&F from 0.4 to 233 l/m 40mm F&F F&F from 0.4 to 233 l/m 50mm F&F F&F from 0.4 to 233 l/m Dimensions & Weights Nominal size 1/4 x 1/8 1/ A/F Dimension A FF Body Length B MF Body Length C FM Body Length D NPT (F&F only) Approx Weight Kg F&F C M&F D B F&M A (Refer also to available; Control Rubbers Precision) Pressure Differential Range kpa (Higher DP options available) Accuracy +/- 10% Available s.4 /.45 /.5 /.55 /.63 /.7 /.8 /.9 / 1.0 / 1.1 / 1.2 / 1.3 / 1.5 / 1.6 / 1.8 / 2.0 / 2.3 / 2.5 / (litres/min) 2.8 / 3.2 / 3.5 / 4.0 / 4.5 / 5.0 / 5.5 / 6.3 / 7.0 / 8.0 / 9.0 / 10 / 11 / 12 / 13 / 15 / 16 / 18 / 20 / 23 / 25 / 28 / 32 / 36 / 41 / 45 / 49 / 54 / 59 / 66 / 73 / 82 / 91 / 102 / 114 / 125 / 138 / 150 / 162 / 180 / 199 / 216 / 233 lpm Materials Body 316 Stainless Steel to ASTM484/A276 Threads, BSPT Threads, NPT Max Pressure Differential Max Temperature Compatible Control Rubbers Specifying valves BSPT to AS ISO Male Series R, Female RP (Standard) NPT to ANSI/ASME B Female NPSC, Male NPT 2000 kpa (for N7 & E7 rubbers only) 6000 kpa 60 o C for Nitrile control rubbers, 100 o C for EPDM, 200 o C for Viton Standard Precision P (Non Standard LP, N6, N7, EP, E7, V, HF) When ordering these valves, please be sure to specify; Body size (NPT if applicable) Thread configuration Body material Control rubber material and pressure differential range - if other than Precision
5 Maric Flow Control Check Valve 15mm p. 31 Application For providing the centrifugal pumping industry with a constant glandwater flow rate to pump glands, - with backflow prevention. A constant pre-set maximum flow rate to centrifugal pump glands can be achieved irrespective of fluctuating gland-water supply pressure, gland condition, or centrifugal pump discharge pressure. Benefits - A constant supply of glandwater to the gland, ensures the life of expensive pump seals are maximised. - Can ensure that the slurry will not be unnecessarily diluted. - Prevents one centrifugal pump from robbing all the available gland water in the event of its failure, which could result in the simultaneous failure of all other glands supplied from the same water supply. 28.5mm - Minimise wastage of available water supplies Features - glandwater flow rate - Back-flow prevention - High pressure and high temperature handling - Corrosion and scale resistant assembly 25.6mm Non-Return Feature. The maintenance free design of the Maric valve uses the flow control rubber as the flexible sealing component in the non-return mechanism. The flexing of the control rubber under normal operating conditions prevents scale build-up on the rubbers surface, which ensures a reliable seal, even after extended periods of no reverse pressure. Unless otherwise specified, EP type EPDM control rubbers are fitted giving the valve the following standard performance; Pressure Differential Range kpa Accuracy +/- 20% Available s.4 /.45 /.5 /.55 /.63 /.7 /.8 /.9 / 1.0 / 1.1 / 1.2 / 1.3 / 1.5 / 1.6 / 1.8 / 2.0 / 2.3 / 2.5 / (litres/min) 2.8 / 3.2 / 3.5 / 4.0 / 4.5 / 5.0 / 5.5 / 6.3 / 7.0 / 8.0 / 9.0 / 10 / 11 / 12 / 13 / 15 / 16 / 18 lpm Check Valve Operation Closed when reverse pressure of 70 kpa exists Body Material 303 Stainless Steel to ASTM484/A582 Thread Configuration F&M, Female inlet (parallel), Male outlet,(tapered) Threads, BSPT 15mm (1/2 ) BSPT to AS Female Series RP, Male Series R Threads, NPT (non-standard) 15mm (1/2 ) NPT to ANSI/ASME B1.20.1, Female NPSC, Male NPT 6000 kpa Temperature Range degrees C. Non-Standard Specifications High pressure 2, E7, kpa. is also available. Alternative flow rates apply Performance Curve Options Maric, No 15 Flow Control Check Valve EP = kpa, High Pressure 2 (E7) = kpa Rated Flow (as a percentage of rated flow) Pressure Differential (across valve in kpa) Please Specify When Ordering: Body Size Configuration Body Material Control Rubber Check Options / Description 15mm F&M Stainless EP (or E7) C 0.4 to 18 lpm Example Part Number for 18 lpm; 15 FM S EP C 18 (Add N here for NPT if required)
6 Maric Flow Control Check Valve 25mm p. 32 Application For providing the centrifugal pumping industry with a constant glandwater flow rate to pump glands, with backflow prevention. A constant pre-set maximum flow rate to centrifugal pump glands can be achieved irrespective of fluctuating gland-water supply pressure, gland condition, or centrifugal pump discharge pressure. Benefits - A constant supply of glandwater to the gland, ensures the life of expensive pump seals are maximised. - Can ensure that the slurry will not be unnecessarily diluted. - Prevents one centrifugal pump from robbing all the available gland water in the event of its failure, which could result in the simultaneous failure of all other glands supplied from the same water supply. 46.0mm - Minimise wastage of available water supplies Features - glandwater flow rate - Back-flow prevention - High pressure and high temperature handling - Corrosion and scale resistant assembly 37.5mm Non-Return Feature. The maintenance free design of the Maric valve uses the flow control rubber as the flexible sealing component in the non-return mechanism. The flexing of the control rubber under normal operating conditions prevents scale build-up on the rubbers surface, which ensures a reliable seal, even after extended periods of no reverse pressure. Pressure Differential Range kpa Accuracy +/- 10% Available s 15 / 16 / 18 / 20 / 23 / 25 / 28 / 32 / 36 / 41 / 45 / 49 / 54 / 59 / 66 lpm (litres/min) Check Valve Operation Closed when reverse pressure of 70 kpa exists Body Material Thread Configuration Threads, BSPT Threads, NPT (non-standard) Temperature Range 316 Stainless Steel to ASTM484/A276 F&M, Female inlet (parallel), Male outlet,(tapered) 25mm (1 ) BSPT to AS Female Series RP, Male Series R 25mm (1 ) NPT to ANSI/ASME B1.20. Female NPSC, Male NPT 6000 kpa 0-60 degrees C. (100 o C for non-standard EPDM control rubbers) Non-Standard Specifications Control rubber material EPDM for higher temp and / or caustic handling Pressure differential ranges kpa., & kpa. In EPDM or Nitrile - Refer to How to Specify Maric Valves Alternative flow rates apply Performance Graph Typical of all PRECISION valves irrespective of body size or flow rate Rated Flow (as a percentage of rated flow) Pressure Differential (across valve in kpa) Please Specify When Ordering: Body Size Configuration Body Material Control Rubber Check Options / Description 25mm F&M Stainless Precision (or other) C 18 to 66 lpm Example Part Number for 66 lpm; 25 FM S P C 66 (Add N here for NPT if required)
Maric Constant Flow Valves for. Glandwater. Flow Control. Product Manual. Constant glandwater flow, regardless of:
for Glandwater Flow Control Product Manual glandwater flow, regardless of: Fluctuating slurry pressure Fluctuating glandwater pressure Gland condition WaterMark Quality Assured S37 Standards Australia
SYSTEM MARIC CATALOGUE. Bertfelt Teknik AB
SYSTEM MARIC CATALOGUE Bertfelt Teknik AB www.bertfelt.com Bertfelt has implemented management quality and enviromental system according to ISO 9001 and 14001. The management system was certified by an
Baker maric flow control valves
Gate Valves 1 Baker maric flow control valves A - W - E - 2 Baker Maric Flow Control Valves Ever since water has been piped there has been a definite need for a practical, accurate, self cleaning and inexpensive
Constant Flow Valves
AUSTRALIA Biggest Range of s Best Accuracy 20 Years Life Expectancy WaterMark Quality Assured S37 Standards Australia Exported Globally Maric Catalogue Manufacturing plant in the outskirts of Adelaide,
Model 2851 CONSTANT FLOW REGULATOR
CONSTANT FLOW REGULATOR Model 2851 The model 2851 constant flow regulator is designed to provide constant flow of liquids or gases regardless of pressure variations. It is intended for low liquid flows
Reduce pressure zone device suitable for high and medium hazard rated applications BSP screwed connections
Reduce pressure zone device suitable for high and medium hazard rated applications BSP screwed connections Features General application The RP03 provides protection from both backsiphonage and backpressure
TA-Modulator. Combined control & balancing valves for small terminal units Pressure independent balancing and control valve for modulating control
TA-Modulator Combined control & balancing valves for small terminal units Pressure independent balancing and control valve for modulating control IMI TA / Control valves / TA-Modulator TA-Modulator The
VERTICAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Tight Spaces UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
VALVCHEQ BACKFLOW PREVENTERS FIGURE RP03
Reduce pressure zone device suitable for high and medium hazard rated applications BSP screwed connections FEATURES GENERAL APPLICATION The RP03 provides protection from both backsiphonage and backpressure
HORIZONTAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Low Ceilings UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
Relief Valves. Relief Valves. International, Inc. Company ACIRCOR. RS Differential NB 9.5mm. RVA In-line Differential NB 6 to 19mm
s s RS Differential NB 9.5mm RVA In-line Differential NB 6 to 19mm RV Direct Acting NB up to 9mm LPR Low Pressure Differential NB 8mm We design, machine, build and test all our products on one site in
Dynamic Valve Type RA-DV Pressure Independent Radiator Valve
Dynamic Valve Type RA-DV Pressure Independent Radiator Valve Application RA-DV straight version RA-DV is a series of pressure independent radiator valves, designed for use in 2-pipe heating systems together
Pressure relief valve DHV 712 DN 65-80: 0,5-10 bar, DN : 0,3-4 bar, DN 100: 0,5-6 bar
Pressure relief valve DHV 7 DN 5-80: 0,5-0 bar, DN 5-00: 0, - bar, DN 00: 0,5 - bar Advantage for high pressure stability reliable reduction of pressure peaks and pulsations pressure setting possible at
ALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8" and 1/4" PTF Port Sizes. Air line equipment.
Air line equipment R Miniature Brass Body Regulator Water and Compressed Air Service 1/" and 1/" PTF Port Sizes Compact design, corrosion resistant construction Brass body with choice of plastic or brass
Pressure Reducing Valve DMV 750 set range: bar
Pressure Reducing Valve DMV 750 set range:.0-6.0 bar Advantage pressure setting possible at any time, also during operation hermetically sealed by valve diaphragm high level of operating safety and long
REGULATORS FLOWMETERS HUMIDIFIERS. Professional GAUGES ASSESSORIES. Medical Apparatus. and Assessories ISO 13485/ISO 9001 CERTIFICATION
Medical Apparatus REGULATORS FLOWMETERS Professional Medical Apparatus and Assessories HUMIDIFIERS GAUGES ASSESSORIES ISO 13485/ISO 9001 CERTIFICATION Company Profile MORRIS ENGINEERING WORKS LTD. was
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
Two-port valves, male threaded, PN25
4 379 Two-port valves, male threaded, PN25 VVG55... Two-port valves, externally threaded, PN25 Bronze Rg5 DN15... 25 mm (½"... 1") k vs 0.25... 6.3 m 3 /h Stroke 5.5 mm Suitable for type SQS35... or SQS65...
THE MF-400 SERIES. Operating and Service Manual. Series includes all variants of MF-400/401
THE MF-400 SERIES Operating and Service Manual Series includes all variants of MF-400/401 Issue A October 2013 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 4. Special
Pressure relief valve DHV 716 set range: 0,5-10,0 bar
Pressure relief valve DHV 7 set range: 0,5-0,0 bar Advantage pressure setting possible at any time, also during operation optimum monitoring valves high reproducibility of the set pressure high level of
Precision and Instrument Regulators 1/4" port size
Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38
InnoVfoam B.V. InnovDos Foam Proportioning System
1724 BL Oudkarspel F. +31 (0)88 9112 119 info@innovfoam.com 1 1. GENERAL INFORMATION SYSTEM COMPOSITION The InnovDos system is made up of two main components (see flow schedule on page 4) that can be integrated
Pressure independent control valve (PICV) FLOWMATIC
Pressure independent control valve (PICV) FLOWMATIC 145 series FM 21654 003 01262/19 GB replaces dp 01262/17 GB Function The pressure independent control valve is a device composed of an automatic flow
Pressure Reducing Valve DMV 755
Pressure Reducing Valve DMV 755 Nominal size DN 10 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 1 to 9 bar control valve for reliable reduction of system pressures to
Body Material: PVC, PP, PVDF Bonnet Material: Glass Filled PP Size: ½ - 2 Pressure Rating: 150 psi Set Pressure: 4 to 150psi Seals:
Pressure Relief Valve Body Material: PVC, PP, PVDF Bonnet Material: Glass Filled PP Size: ½ - Pressure Rating: 50 psi Set Pressure: to 50psi Seals: EPDM, FPM, PTFE Piston: PVC, PP, PVDF, PTFE Diaphragm:
Overview of types. Technical data. Safety notes
Technical data sheet R2..-S.. Open-close ball valves, 2-way, with internal thread For open and closed cold and warm water systems For shut-off functions on the water side and 2-point controls in U and
Overview of types. T5-R B2/R B2 en v Subject to changes 1 / 4. k vs (Sequence 2)
Technical data sheet R3015-..-..-B2 / R3020-..-..-B2 Characterised control valves, 6-way, with internal threads Two sequences (cooling/heating) With a rotary actuator 90 Water-side switching or modulating
CAST IRON VALVES FLOAT VALVE
CAST IRON VALVES FLOAT VALVE NETAFIM CAST IRON VALVES FLOAT VALVE INLINE 25-400MM ANGLE 50-100MM SPECIFICATIONS Manufactured to ISO 9001 Available Valve sizes INLINE Flanged 50mm to 600mm & Threaded 19mm
TA-COMPACT-P. Combined control & balancing valves for small terminal units Pressure independent balancing and control valve (PIBCV)
Combined control & balancing valves for small terminal units Pressure independent balancing and control valve (PIBCV) IMI TA / Control valves / The pressure independent balancing and control valve ensures
Overview of types. Technical data
Technical data sheet R2..xx-S.. Characterised control valves, 2-way, with internal thread For open and closed cold and warm water systems For modulating water-side control of U and heating systems ir bubble
Ballorex Dynamic Description. Versions. Benefits. Balancing
Ballorex Dynamic Description The Ballorex Dynamic valve is a combined pressure independent flow limiter and control valve which maintains a constant flow independently of pressure changes in heating or
MZX. Three-Port Seat Valves SPECIFICIATIONS AND GUIDE TO SELECTION
01 These seat valves are of globe construction with a linear moving spindle and a modified parabolic characterised plug operating against the upper seat which controls flow quantity to suit the load. The
Non-Return Valves T55 Series
T55 Series In-Line, Non-Return Valves M5, 1 8", 1 2" BSPP, BSPT, NPT Permit free flow of air in one direction only Simple, reliable design Light weight Silicone free Low cracking pressure Technical ata
SPECIFICATIONS. Approximate Weight: 10 oz. Surface Finish: Ra micro inch or less MATERIALS OF CONSTRUCTION
DIFFUSION-RESISTANT, DIAPHRAGM SEAL, EXCESS FLOW SHUT-OFF VALVES (FS SERIES) FS Series Excess Flow Shut-Off Valves are designed to automatically shut-off the delivery of gas in a line if the flow exceeds
Installation, commissioning and servicing instructions
488.03 www.reece.com.au Pressure reducing s Installation, commissioning and servicing instructions Function Pressure reducing s are installed in residential water systems to reduce and stabilise inlet
InnovDos Foam proportioning system
InnovDos Lorrie 9 NL - 1724 BL Oudkarspel T: +31 88 9112 112 F: +31 88 9112 119 info@innovfoam.com www.innovfoam.com 1 1. General Information System Composition The InnovDos is made up of two main components
776 Cryogenic Safety Valve
776 Cryogenic Safety Valve INTRODUCTION 776 Cryogenic Safety Valve The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both plant
RA-N radiator valves with integrated presetting and self-sealing tailpiece
Data sheet RA-N radiator valves with integrated presetting and self-sealing tailpiece EN 215 Application Straight version Angle version Horizontal angle version All RA-N valve bodies can be used together
2-port and 3-port valves PN 16
OEM 2-port valves VVP459.10-0.63 to VVP459.25-6.3 3-port valves VXP459.10-0.63 to VXP459.25-6.3 3-port valves with bypass VMP459.10-0.63 to VMP459.20-4 2-port valves VVP459.25-6.3 to VVP459.40-25 3-port
Piloted Non-Return Valves
ed Non-Return Valves ed non-return valves are designed to protect installations: if the compressed air supply is removed, they lock the air supply to the cylinder, thus maintaining it in position. Product
self closing tapware and bubblers AUTOMATIC SHUT-OFF REDUCE WATER WASTE IMPROVE HYGIENE VANDAL RESISTANT Spring Action Series Time Flow Series
self closing tapware and bubblers Spring Action Series AUTOMATIC SHUT-OFF REDUCE WATER WASTE IMPROVE HYGIENE VANDAL RESISTANT Time Flow Series A joint government and industry program When tested at, 2
Mechanical Pressure Measurement
Mechanical Pressure Measurement Differential Pressure Gauges Model GDP, Universal Version, with Diaphragm Element High Overpressure Safety PN 40, 100, 250 or 400 Applications Differential pressure measurement
STAD-D. Balancing valves Balancing valve for domestic water systems, DN Balancing valves
STAD-D Balancing valves Balancing valve for domestic water systems, DN 15-50 Balancing valves IMI TA / Balancing valves / STAD-D STAD-D The STAD-D balancing valve delivers accurate hydronic performance
HIGH-PRESSURE RELIEF VALVES
HIGH-PRESSURE RELIEF VALVES H-9HP SERIES FEATURES n St.St. 316 Construction n MAWT up to 6 psi n Set Pressure from 5 psig to 6 psig ( 3.5 to 4 bar) n Identifying colored springs for each pressure range
2-port seat valves PN25 with externally threaded connections
4 379 2-port seat valves PN25 with externally threaded connections VVG55.. Valve body bronze CC491K (Rg5) DN 15...25 (½...1 ") kvs 0.25...6.3 m3/h Stroke 5.5 mm Sets of ALG.. with threaded and ALS.. with
Jamieson Equipment Company 5314 Palmero Court Buford, GA
CONTENTS GENERAL INDUSTRIAL CONTROL VALVES...Page 3 HOW TO ORDER GOYEN MANUFACTURED VALVES...Page 4 Direct Lift...Page 5 Pilot Operated - Air, Water and Light Oil...Page 6 Pilot Operated Ô- Air or Gas...Page
Pressure Equalising Valves Model , for Differential Pressure Gauges
Accessories Pressure Equalising Valves Model 910.25, for Differential Pressure Gauges WIKA Data Sheet AC 09.11 Applications T Isolating, pressure equalising as well as purging and air bleeding valves to
By-pass valves Series 466 Thermatic - Series USVR
By-pass valves Series 466 Thermatic - Series USVR Main features - Available in the following version : Female/Female series 466 1/2, 3/4, 1 Female/Male series USVR 3/4, 1, 1.1/4 - Conforms to standard:
High Performance BSP Dial Up Pattern Pressure Reducing Valve
See our full range online at: www.vip-ltd.co.uk High Performance BSP Dial Up Pattern Pressure Reducing Valve VIP Product Code 31/0103 FUNCTION Pressure reducing valves are devices which, when installed
Pressure relief valve DHV 725 set range: 0,2-10,0 bar
Pressure relief valve DHV 75 set range: 0, - 0,0 bar Advantage pressure setting possible at any time, also during operation optimum monitoring valves high reproducibility of the set pressure high level
CALEFFI. Pre-adjustable pressure reducing valves with self-contained cartridge series 01085/17 GB. replaces 01085/14 GB
Pre-adjustable pressure reducing valves with self-contained cartridge - series CCREDITED ISO 9 FM CLEFFI /7 GB replaces / GB Function Pressure reducing valves are devices which, when installed on private
2-port and 3-port seat valves, PN16
s 4 47 VVI47 VXI47 CVTIX 2-port and 3-port seat valves, PN6 with internally threaded connections VVI47.. VXI47.. ronze valve body CC49K (Rg5) DN 5...5 k vs 2.5...4 m 3 /h Internally threaded connections
Technical data sheet. Type overview. Technical data. Safety notes. T5-R2.. Open-close en v Subject to changes 1 / 3
Technical data sheet R2.. Open-close ball valves, 2-way, with internal thread for open and closed cold and warm water systems for shut-off functions on the water side and 2-point controls in air-handling
TECHNICAL ACCESSORIES
A.R.I. VALVES S-050P AIR PLASTIC RELEASE 16 BAR Automatic Component A.R.I patent, Rolling Seal Mechanism: Dramatically reduces the possibility of obstruction by debris. Discharges high air flow rates upto
Solenoid valves VZWF, force pilot operated
Key features and overview Function Normally closed solenoid valve with diaphragm and forced lifting. When the solenoid is energised, the differential pressure from the secondary side of the diaphragm is
Pre-adjustable pressure reducing valves with self-contained cartridge
Pre-adjustable pressure reducing valves with self-contained cartridge 535..H series ACCREDITED ISO 91 FM 15 15/17 GB replaces 15/1GB Function Pressure reducing valves are devices which, when installed
SEMI FIXED/PORTABLE LINE PROPORTIONERS SLP NPR270
SEMI FIXED/PORTABLE LINE PROPORTIONERS SLP Simple Inexpensive Foam Proportioner Portable Inlet Pressure Choices 90 to 200 PSI Foam Rate 44 GPM to 362 GPM Salt Water Compatible Special Flow And Pressure
STA. Double regulating valves DN 15-50
STA Double regulating valves DN -0 IMI TA / Balancing valves / STA STA The STA double regulating valve delivers accurate hydronic performance in an impressive range of applications. Ideally suited for
Cash Valve TYPE G-4 PILOT OPERATED PRESSURE REDUCING REGULATOR FOR STEAM, AIR AND GASES. ISSUED - MARCH 2001 CAVMC-0512-US-0208 ISO 9001 Certified
Cash Valve TYPE G-4 PILOT OPERATED PRESSURE REDUCING REGULATOR FOR STEAM, AIR AND GASES ISSUED - MARCH 2001 CAVMC-0512-US-0208 ISO 9001 Certified TYPE G-4 DESCRIPTION FIG 2042 - Bronze FIG 2043 - Bronze
REDUCED PRESSURE ZONE DEVICES SERIES PRODUCT CODES OPERATION HIGH HAZARD RATING. 15mm - 50mm FEATURES APPLICATION DESCRIPTION
PRODUCT CODES RPZ15DO RPZ20DO RPZ25DO RPZ32DO RPZ40DO RPZ50DO RPZ15 RPZ20 RPZ25 RPZ32 RPZ40 RPZ50 15mm RPZD Device Only 20mm RPZD Device Only 25mm RPZD Device Only 32mm RPZD Device Only 40mm RPZD Device
Simple Set Max. Pressure Independent Control Valves 2 Way 2-1/ /09/18
The Bray Simple Set Max is a flanged pressure independent control (PIC) valve designed for a wide variety of hot water and chilled water control applications. The SSM Series combines high rangeability
Compact differential pressure switch Flameproof enclosure Ex d Models DE, DEC
Mechatronic pressure measurement Compact differential pressure switch Flameproof enclosure Ex d Models DE, DEC WIKA data sheet PV 35.41 Process Compact Series Applications Differential pressure monitoring
PRESSURE REGULATORS AND FLOWMETERS, ALL MEDICAL GASES
PRESSURE REGULATORS ALL MEDICAL GASES In this section we propose our pressure regulators (FM series, MU and MERCURY ) and our Rs flowmeters for applications other than oxygen therapy (presented in the
BTV. Internally threaded 2-way control valve. Flow characteristics. Function
Internally threaded 2-way control valve The valves are designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. They are pressure balanced (from DN20-50, not DN15) and
Versions. Benefits. Balancing DN15-32 DN40 DN50 DN15, DN20, DN25, DN32, DN40, DN50. Dimensions
Ballorex Delta Description The Ballorex Delta is a differential pressure control valve used in hydronic heating or cooling systems. By ensuring a constant differential pressure across motorized or static
Test pumps. Pressure sources. Good reasons for proper and reliable calibration
Test pumps Pressure is one of the most commonly measured quantities in engineering, which is why exact and reliable pressure measurement is especially important. However, the characteristics of the even
Safety Blocks Brochure
Hydraulic & Offshore Supplies Safety Blocks Brochure YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE FAWCETT CHRI STI E Safety Block s Carbon
Pressure Reducing Valve DMV 755 set range: 1,0-9,0 bar
Pressure Reducing Valve DMV 755 set range:,0-9,0 bar Advantage pressure setting possible at any time, also during operation high reproducibility of the set pressure high level of operating safety and long
Compact Transfer Pump
Munster Simms Engineering, better known under the product brand name Whale, is an independent company engaged in the design, manufacture, marketing and selling of pumps, valves, faucets and plumbing (water
TBV-CM. Combined control & balancing valves for small terminal units For modulating control
TBV-CM Combined control & balancing valves for small terminal units For modulating control IMI TA / Control valves / TBV-CM TBV-CM Designed for use in terminal units in heating and cooling systems, the
STAD-C. Balancing valves DN 15-50
STAD-C Balancing valves 15-50 IMI TA / Balancing valves / STAD-C STAD-C The STAD-C balancing valve has been specially developed for use in indirect cooling systems but performs just as effectively in refrigerated
INDUSTRIAL EXCESS ESS FLOW VALVES
INDUSTRIAL EXCESS ESS FLOW VALVES H-911 SERIES FEATURES n Stainless Steel Construction n MAWP 6000 psi (413 bar) n MAWT 400 F (204 C) n Variable connection sizes (1/8 to 1/2'' & 6 to 12mm) n Cv = 0.5 ;
CALEFFI. Reduced pressure zone backflow preventer. 574 series 01022/18 NA D E C F B D E. Function
Reduced pressure zone backflow preventer series LEFFI 01022/18 N REITE ISO 9001 FM 216 ISO 9001 No. 000 Function The backflow preventer can be used in all plumbing systems where there is danger of the
Cash Valve. Type G-4. Pilot Operated Pressure Reducing Regulator for Steam, Air and Gases. Flow Control
Cash Valve Type G-4 Pilot Operated Pressure Reducing Regulator for Steam, Air and Gases Issued - March 2001 CAVMC-0512-US-0609 ISO 9001 Certified Flow Control Description FIG 2042 - Bronze FIG 2043 - Bronze
Pressure reducing valves Index
Index General information page Introduction 506 General introduction 507 for a steam plant 509 Product information BSP thread page Brass 510 ; BSP female thread 511 ; BSP male thread 513 Stainless steel
GM-7000 Series CE Approved Gas Control Valve
Product Bulletin Issue Date November 16, 2012 GM-7000 Series CE Approved Gas Control Valve The GM-7000 Series multi-function gas control valve works in conjunction with an electronic sequence control unit
Radiator valves VDN2.. VEN2.. VUN2..
2 106 EN 215 Straight valves VDN2.. Angle valves VEN2.. Reverse angle valves VUN2.. ACVATIX TM Radiator valves VDN2.. VEN2.. VUN2.. NF norm, for 2-pipe heating systems Valve bodies made of brass, mat nickel-plated
Water valve Type WVO. Data sheet MAKING MODERN LIVING POSSIBLE
MAKING MODERN LIVING POSSIBLE Data sheet Water valve Type WVO Water valve type WVO is used for regulating the flow of water in refrigeration plant with water-cooled condensers. The water valve gives modulating
Ball Valves Gemels GE3 3-WAY HIGH PRESSURE BALL VALVES. Type and way of valve GE3 3-way high pressure ball valves
Carbon Steel Ball Valves Gemels 7.1.1 GE3 3-WAY HIGH PRESSURE BALL VALVES GE3 carbon steel GE3 G 1/2 DN13 1 1 1 1 A B Type and way of valve GE3 3-way high pressure ball valves Valves dimension of inch
SABERINDO PACIF SABERINDO PACIFIC CIFIC SABERINDO PA. A Tyco International Company
CIF A Tyco International Company 1 Foam Concentrate CIF 3% AFFF -UL Listed -UL Canada Listed 6% AFFF 6 parts AFFF concentrate to 94 parts water -UL Listed- Foam Liquid -UL Canada Listed 3% FLUOROPROTEIN
World Area Differences Technical Information
World Area Differences Technical Information DMISC2047X02 This document is to give more information about the following: Porting & Threads Cleaning Procedures Conversion Tables PORTING & THREADS NPT (National
Pressure Transmitters 36 F-27839
Pressure Transmitters 36 F-27839 SPD310/SPD360 Air Differential schneider-electric.com 37 SPD310/SPD360 SPD310/SPD360 differential pressure transmitters are intended for use in air handling systems for
Model MTB-ASME Horizontal Bladder Tanks
DATA SHEET Model MTB-ASME Horizontal Bladder Tanks Features n UL Listed and FM Approved for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure
Rp [ ] Sv min. [ ] C215QP-B 15 1/ C215QP-D 15 1/ C220QP-F 20 3/ [ ]
![Rp [ ] Sv min. [ ] C215QP-B 15 1/ C215QP-D 15 1/ C220QP-F 20 3/ [ ]](/thumbs/75/72185867.jpg "Rp [ ] Sv min. [ ] C215QP-B 15 1/ C215QP-D 15 1/ C220QP-F 20 3/ [ ]")
Technical data sheet C2..QP-.. For closed cold and warm water systems For modulating control of airhandling and heating systems on the water side Snap-assembly of the actuator overview DN [ ] Vnom [ l/h]
Products no longer available
Technical data sheet R2.. Characterized control valves, 2-way, with internal thread for open and closed cold and warm water systems for modulating control on the water side of air-handling and heating
Hoses and Lances 20,000 PSI
Jetstream provides a full arrangement of hoses and flex lances for ultra high pressure waterblasting. The hoses and lances are designed to be durable and reliable for any 20,000 psi application. A large
Horizontal Bladder Tanks
DATA SHEET Horizontal Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
Installation, commissioning and servicing instructions
48323 www.caleffi.com Pre-adjustable pressure reducing valve with self-contained cartridge Copyright 2015 Caleffi 5350..H AUS series Installation, commissioning and servicing instructions Function Pressure
MULTI-STAGE VACUUM GENERATORS PVP 12 MX and 25 MX
MULTI-STAGE VACUUM GENERATORS PVP 12 MX and 25 MX This new range of multiple ejector vacuum generators represents the natural evolution of the PVP 12M and 25M generators. In fact, given the same air consumption
Vertical Bladder Tanks
DATA SHEET Vertical Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
The Shand & Jurs Model Vapor Guard Tank Blanketing Valve
Lower maintenance due to fewer parts Occupies less space, less stress to tank Teflon is inert to most chemicals; extends service life Simplifies and lowers maintenance cost Optimizes flow of blanketing
VB-7323 Series. Application. Features. Applicable Literature. 1/2 to 2 Screwed NPT Three-Way Diverting Valves General Instructions
VB-7323 Series 1/2 to 2 Screwed NPT Three-Way Diverting Valves General Instructions Application VB-7323 series three-way diverting valves control hot or chilled water in heating or air conditioning systems.
DS MB, MBF THREE PORT VALVES
DS 4.501 04/96, F THREE PORT VALVES Specification No. 617-X-XXX* F 618-X-XXX* and F valves are of the 3-port rotary-shoe type. They are characterised for use as mixing or diverting valves, with hot or
Pressure Relief Valve DHV 718
Pressure Relief Valve DHV 718 Nominal size DN 8 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 0.5 to 10 bar diaphragm controlled pressure relief valve simple design,
Water Pressure Reducing Valves
Water Pressure Reducing Valves Controlling Water Pressure in Residential, Commercial, and OEM Applications Watts.com The One-stop Shop for Pressure Regulators Watts is the manufacturer of choice for Water
SEALED CONNECTORS FOR THE LIMIT SWITCHES
SEALED CONNECTORS FOR THE LIMIT SWITCHES LIST OF MODELS / Sealed connectors are used at the cable-connecting section of limit switches. Type and appearance Materials Features Target market Applications
STAP. Differential pressure controller DN 15-50
Differential pressure controller 15-50 Pressurisation & Water Quality Balancing & Control Thermostatic Control ENGINEERING ADVANTAGE is a high-performing differential pressure controller that keeps the
YORKEX HARD KUTERLON PLASTIC COATED. Wall 10mtr 25mtr
YORKSHIRE COPPER TUBE BS EN1057 YORKEX H/HARD YORKEX CHROME YORKEX HARD (T/X) PLATED O/D Press O/D Press O/D Press Wall Stock Lth 65C Wall Stock Lth 65C Wall Stock Lth 65C MM 3mtr 6mtr Bar MM 3mtr 6mtr
Direct Operated Precision Regulator Modular Style. Standard Specifications
1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com
Tank Blanketing Pressure Regulators RHPS Series
www.swagelok.com Tank Blanketing Pressure Regulators RHPS Series Types: pressure reducing and vapor recovery 16L stainless steel construction 1/2, 1, and 2 in. end connections Working pressures up to 22