1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING

Transcription

1 SAFETY DATA SHEET Issue Date: 08-May-2014 Revision Date: 08-May-2019 Revision number: 1 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Product Name Item#: Recommended use Supplier NZ20791 Teat spray DeLaval Manufacturing PO Box Kells Place Hamilton, New Zealand Tel (8am-4:30pm M-F) Telephone Number (8am - 4:30pm Mon-Fri) Emergency Telephone Number (National Poisons Centre) CHEMCALL 2. HAZARD IDENTIFICATION NON HAZARDOUS SUBSTANCE NON-DANGEROUS GOODS Potential Health Effects Principle Routes of Exposure Eye contact Skin contact Ingestion Inhalation Major effects of exposure EYES SKIN INGESTION INHALATION May cause irritation May cause irritation with prolonged exposure Harmful if swallowed. May irritate nose, throat, and respiratory tracts Read Safety Data Sheet before use 3. COMPOSITION/INFORMATION ON INGREDIENTS Other ingredients, determined not to be hazardous subject to the provisions of the Hazardous Substances (identification) Regulations 2001, make up the product concentration to 100% Page 1 / 5

2 Eye contact Skin contact Inhalation Ingestion 4. FIRST AID MEASURES Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes If eye irritation persists, get medical advice/attention Remove contaminated clothing and shoes Wash off immediately with plenty of water for at least 15 minutes Get medical attention if irritation develops and persists Move to fresh air If breathing is difficult, give oxygen Seek medical attention if the patient shows any sign of respiratory difficulties Do not induce vomiting. Drink 1 or 2 glasses of water. Call a physician or Poison Control Centre immediately. Never give anything by mouth to an unconscious person. 5. FIRE-FIGHTING MEASURES Hazchem Code Flammable Properties Suitable Extinguishing Media No Hazchem Code allocated The product is not flammable. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment Unsuitable Extinguishing Media Specific hazards arising from the chemical Protective Equipment and Precautions for Firefighters Product will decompose at high temperatures releasing poisonous fumes of iodine vapor. As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear 6. ACCIDENTAL RELEASE MEASURES Personal precautions Environmental Precautions Methods for cleaning up Avoid contact with skin, eyes and clothing. Use personal protective equipment. Prevent further leakage or spillage if safe to do so. Avoid dispersal of spilt material into waterways, drains, and sewers. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Keep in suitable, closed containers for disposal. 7. HANDLING AND STORAGE Handling Storage Wear personal protective equipment. Avoid contact with skin, eyes and clothing. Keep containers tightly closed in a dry, cool and well-ventilated place. Keep in properly labelled containers. Page 2 / 5

3 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering Controls Personal Protective Equipment Eye/face Protection Skin Protection Respiratory Protection Ensure adequate ventilation, especially in confined areas Safety glasses with side-shields. Wear overalls, rubber gloves, gumboots, and PVC apron No special protective equipment required General Hygiene Considerations Keep away from food, drink, and animal feeding stuffs. When using, do not eat, drink, or smoke. Contaminated work clothing should not be allowed out of the work place. Avoid contact with skin, eyes, and clothing. Wear suitable gloves and eye/face protection. Appearance Dark brown Clear Form Liquid Odor Iodine ph 4-7 Specific Gravity Vapor Pressure Vapor Density Boiling Point/Range Freezing Point/Range no data available VOC Content 2 9. PHYSICAL AND CHEMICAL PROPERTIES 10. STABILITY AND REACTIVITY Chemical Stability Conditions to Avoid Incompatible Materials Hazardous decomposition products Stable under normal conditions Heat, flames and sparks oxidizing agents Thermal decomposition can lead to release of poisonous fumes. (. Iodine. ). Page 3 / 5

4 11. TOXICOLOGICAL INFORMATION Component Information Potential Health Effects Carcinogenicity There are no known carcinogenic chemicals in this product Sensitization Neurological Effects Mutagenic effects Reproductive Effects Developmental Effects Target Organ Effects 12. ECOLOGICAL INFORMATION Ecotoxicity Persistence and degradability Bioaccumulation/ Accumulation Mobility Biodegradation Some ingredients of this material have some potential to biodegrade, but most ingredients have a limited potential to biodegrade or have not been tested. 13. DISPOSAL CONSIDERATIONS Waste Disposal Method Contaminated Packaging Dispose of in accordance with local regulations. Should not be released into the environment. Empty containers should be taken for local recycling, recovery or waste disposal 14. TRANSPORT INFORMATION Not regulated ADR/RID ADR/RID Not regulated Page 4 / 5

5 15. REGULATORY INFORMATION 16. OTHER INFORMATION Prepared By DeLaval Manufacturing N. Congress Ave. Kansas City, MO USA References NZS 5433:2007 Transport of Dangerous Goods on Land Land Transport (Dangerous Goods) Rule 45001:2005 Hazardous Substances Regulations 2001: - Minimum Degrees of Hazard - Classification - Classes 1 to 5 Controls - Classes 6, 8 and 9 Controls - Packaging Regulations - Identification Regulations - Dispoal Regulations - Emergency Management - Identification Regulations - Disposal Regulations Health and Safety in Employment Regulations 1995 User Guide to the HSNO Thresholds and Classifications OSH Workplace Exposure Standards January 2002 NZCIC Approved Code of Practice - Preparation of Safety Data Sheets Signage for premises storing hazardous substances and dangerous goods Disclaimer The information provided on this SDS is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guide for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered as a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other material or in any process, unless specified in the text Note Once printed this document is not controlled. Please contact DeLaval for the latest version Document preparation Document revision Date document Version date date revised 08-May May End of SDS Page 5 / 5