H. H. HOWELL, INC. Inland Ocean Bevans #1 Bevans & Wildcat Field Menard County, Texas
|
|
- Shon Perkins
- 5 years ago
- Views:
Transcription
1 H. H. HOWELL, INC. Bevans & Wildcat Field Menard County, Texas API # RRC Permit # GAU letter, RRC Letter #GAU-1436 = 245 Ground Elevation GL: 2186 (Rig KB to GL =8 ) Rig KB =2194 Location: 510 FEL & 1680 FSL of J. D. Sheen Survey #6, A-1021 Long: Lat: State Plane: (Texas Central) X: Y: The drill-site is 6 miles east of Ft. McKavett & 14 miles southwest of Menard (straight line). Legal: 510 FEL & 1345 FSL of Oil and Gas Lease commencing July 3, 2013, from Jerry Wayne Krumrey and Nancy Anne Krumrey, Lessor and H.H. Howell, Inc., Lessee, recorded by Memorandum in Volume 240 at Page 645 of the Official Public Records of Menard County, covering acres of land in Menard County, Texas. Permit Depth: Primary Objectives: Lower 1,760 ; 2,720 ; 3,090 Secondary Objectives: King 1,390 ; Goen 3,150 ; 3,300. Directions: From Menard go west on Eldorado Hwy 190 towards Fort McKavett approx 16 miles to Dunagan Road. Turn left (south) and crossover the San Saba River. Follow Dunagan Road curving right (west) approx 1 mile to McGowan Ranch Road and turn left (south) through rock pillar gate. (If you hit the River again you have gone too far). Thru rock pillar entrance, proceed approx. ¾ mile south/southeast to a Y (with a cowboy cut-out and Baylor painted on it). Continue right (southwest) at the cowboy and then south approx. 2.5 miles (across 2 cattle guards) until you come to a high fence gate. At the high fence gate turn left (east) thru two low fence gates. Combo is 1577 on the lock w/ electrical tape (or 5761 is the other lock). Be sure to relock them back together. Proceed east 2 miles on easement road to Howell Bevans lease entrance Dos Pacanas ranch gate on the left (east). Combo Follow flagged oilfield road approx 1 mile east to drillsite. Daily Drilling Reports : Meeting with Inland Ocean to finalize operational plans. Confer with landowner : Transmit drilling prognosis, proposed location plat and commence preliminary operations including contact with 3 drilling companies, mud company. Arrange survey work. Notify landowner of commencement of operations, access and timing : Continue preliminary operations, review current drilling bids : Update drilling prognosis. Confirm preliminary survey work : File RRC Form GW-1. Confer with landowner : Commence preliminary survey work on the lease : Receive GAU (Groundwater protection) letter (see above) : Surveyor stakes drillsite and measures distances from lease, Survey lines and the old Quinn Bevans producer, also ground elevation (see above). Report from Survey manager: The site looks good with nothing in the way. Good flat surface and easy to find : Receive and work with draft of Survey Plat; receive revised Survey Plat and approve same : Expect to receive Final Survey Plat and file for W-1 (permit) : Received Final Survey Plat : Filed Form W-1, Application for Drilling Permit : Receive permit (see above).
2 Drilling Report Page 2 of : Confer with landowner who approves drillsite as staked and access. Scheduled Byler Dozer to meet on location Friday to begin road, location and pit work. Arranging surface hole and surface casing to be preset by Lange Drilling. Receive drilling contract and primary drilling rig is tentatively scheduled for early March : Summary since last report: Met Byler Dozer and drove to drillsite (on ). Agreed to scope of work for access and site plan. Flagged out new oil field road from entrance gate to location (along south fence line). Confirmed with landowner about necessary fence and gate modifications: at the 2 mile turn and at the Dos Pacanas high fence lease entrance in order to accommodate drilling rig. Coordinated with fencing personnel and Byler. Alert GTE and landowner about site work and potential phone line interruption : Byler started last week but weather has limited time on location. Been working this week until this afternoon and weather getting bad again. Gate and fence work underway also : Summary since last report: Byler Dozer continues to build roads and location after 2 weeks of intermittent working weather. Gate and fence work also underway. Anticipate location will be ready for Lange Drilling to spud and pre-set surface casing in +/- 7 days : Road, location, fencing and entrance work 95% complete. Wet weather today, but expect Lange Drilling to Move-in and spud surface hole on Monday or Tuesday : Road, location*, fencing and entrance work complete (*Cellar to be finished after Surface casing set). Roads are good and prep to move-in Lange Drilling : Move-in Lange (Surface-Hole) Drilling Rig : This AM, Rigging up Lange Drilling and awaiting arrival of drill pipe; expect to spud later today : This AM, prep to spud. 1:30 Afternoon update: Spud surface hole with Lange Drilling and presently drilling 11 depth of 40. Expect to TD surface hole this PM, plan to run and cement surface casing tomorrow : [1-s] This AM, condition surface hole to run 255. Spud and drilled 255 in last 24 hrs. Mud: air/native. Bit #1: 11 spud. Unload & tally /8 23# new STC surface casing : [2-s] This AM, Surface casing 255 and Lange released. In last 24 hours, run and cement 255 of Surface casing (described above). Cemented with added pea gravel for lost returns and successfully tested to 1800#. Railroad Commission was on-site to witness : [3-s] This AM, Byler Dozer installing cellar and prep to receive primary drilling rig, Blueline Drilling Co., expected to move-in the week April 6, weather permitting : Blueline Drilling will have rathole drilled in next day or two and line pit. Mudlogger and water have been alerted to Drill-out spud date of Mon. or Tues : This AM, moving in Blueline Drilling. Expect rig-up tomorrow and drillout late PM : This AM, moving in and rigging up Blueline Drilling. Expect drillout this PM.
3 Drilling Report Page 3 of : [1] This 6:00 AM, 526. Rigged up Blueline and drilled 271 in last 24 hrs. Mud: 8.7#, 40 visc, WL na. Bit #1: 7-7/8 Ulterra U516S 255. Summary: move-in rig-up; work on pump & nipple up; service rig and sling shot collars; test BOP; drill cement; drill new formation; displace hole with mud; drill : [2] This 6:00 AM, 1,610. Drilled 1,084 in last 24 hrs. Mud: 8.9#, 40 visc, WL na. Bit #1: 7-7/8 Ulterra U516S 255. Deviation Surveys: 1/2 639 ; 1/ Mud loggers: Current background gas 5 units; no shows. Summary: drill; service rig; drill; Wireline survey; drill; wireline survey; drill; service rig; drill; unload hole; drill. Expect to drill Danny Mae sand in next 24 hours : [3] This 6:00 AM, 2,370. Drilled 760 in last 24 hrs. Mud: 9.2#, 44 visc, WL na. Bit #1: 7-7/8 Ulterra U516S 255. Deviation Surveys: 3/ ; 1-1/ Mud loggers: Current background gas 6 units; Max gas ; no shows. Summary: drill; Wireline survey; drill; WL survey; drill; WL survey; drill. Expect to drill Canyon & Palo Pinto limes and Cross Cut sands in next 24 hours : [4] This 6:00 AM, 2,965. Drilled 595 in last 24 hrs. Mud: 9.3+#, 43 visc, WL na. Bit #1: 7-7/8 Ulterra U516S 255. Deviation Surveys: ; 3/ Mud loggers: Current background gas 6 units; Max gas ; no shows. Summary: Drill; WL survey; drill; WL survey: drill; service rig; drill : [5] This 6:00 AM, drill stem 3,223. Drilled 258 in last 24 hrs. Mud: 9.6#, 55+ visc, WL na. Bit #1: 7-7/8 Ulterra U516S 255. Deviation Surveys: 1-1/ Mud loggers: Running DST over Shows #1-3 (See below) Summary: Drill; WL survey; drill; circ samples; drill; circ samples; drill; circ samples; drill; circ for short trip; short trip; circ for DST; POOH; pick up DST tool; trip in hole w/ DST tool; DST. Mud Log Show #1: 3,080-3,095 (Camar sand); fair but thin drill break; 14 max gas units; 4% tan oil stain; 5% bright yellow fluorescence; instant good dry cut; fair oil odor. Mud Log Show #2: 3,150-3,165 (upper Goen lime); fair drill break; 33 max gas units; trace of crystal-lined fractures (FFWXLs) w/ tan oil stain & odor; 3% bright yellow fluorescence; good dry cut; fair oil odor. Mud Log Show #3: 3,180-3,213 (lower Goen lime); good drill break on bottom; 44 max gas units; 2-4% re-crystalized zones w/ tan oil stain & odor; 7-8% bright yellow-white fluorescence; good dry cut; good oil odor. Good drill had oil in sample wash water : [6] This 6:00 AM, R/U open-hole TD 3,500. Drilled 277 last 24 hrs. Mud: 9.5#, 55+ visc, WL na. Bit #1: 7-7/8 Ulterra U516S 255. Deviation Surveys: 1-1/ Mud loggers: Show #4 (See below) Summary: DST; POOH w/ DST tool; breakdown & load out tool; TIH to bottom; P/U kelly & circ break; drill; WL survey; drill; circulate to log; TOOH to log; service rig; continue TOOH to log; rig up loggers. Mud Log Show #4: 3,224-3,232 (possible Gray-Gardner sand); excellent but thin drill break; 179 max gas units; 60% white sand w/ porosity; 10% bright yellow fluorescence; strong oil odor. Oil on the pits.
4 Drilling Report Page 4 of : (cont) DST #1: 3,078-3,223 (Note: drill depth and E-log depths are off 13-feet). Opened tool for first flow with weak blow throughout 30 min. SI 1 hour; Reopened well for second flow w/ weak blow throughout 60 min. 1st 30 min Flow Pressures: 38-46# 1st 1 hour SIP: 128# 2nd 60 min Flow Pressures: 41-46# 2nd 2 hour SIP: 356# Recovered in drill pipe: 50 Gas in collars & 40 gas, and oil cut drlg mud (2% oil). Sample Chamber: 46#, trace gas, 1,100 ccs free oil (gravity 60 deg) & 900 ccs gas cut drlg mud. Note: Oil recovered on DST is green/brown colored, apparent low viscosity (flows easily), sweet crude : [7] This 6:00 AM, rigging down TD 3,500. Logged & ran production casing in last 24 hrs. Mud: na. Bit #1: 7-7/8 Ulterra U516S 255, Summary: Logging with Baker Hughes- High Definition Induction Gamma Ray Log; Compensated Z-Densilog; Compensated Neutron Log; Digital Spectralog; Minilog; Gamma Ray Log; Digital Acoustilog Gamma Ray Caliper; trip in hole w/ drill collars; evaluate logs and recommend running production casing; TIH; break circulation; circulate in prep to down drill pipe; lay down drill pipe and collars; rig up casing crew; run 83 joints of 4-1/2 10.5# production casing to 3494 ; circulate through casing; rig up cementers & cement w/ 545 sx Class C w/ 2% CaCl cement; plug 11:15 PM; pick up BOPs and set slips; cut off casing & rigging down rig. Rig 3:15 AM. End of Well Report to follow. Daily Initial Completion Reports : Install new locks and chain on lease gate. Inspect location weather situation : Solicit frac and acid stimulation bids for pending completion : Move-in Frac tanks for completion operations. Rig scheduled for Wed 17th : Inspect location for weather situation. Location received +2 inches of rain in a few hours; too wet for Wednesday. Rig rescheduled for next week : Yesterday, again inspected for access; low spot still wet. Have scheduled Anchor truck to set anchors for workover rig today; will get another update this PM. Have rescheduled Forbes completion rig for July 2nd. (Soonest they could get back to us). Current plan is to perforate on Friday, 3rd, test over the weekend and then the Mac Oilfield Services frac on Monday 6th : This AM, anchors are drilled and set; roads looking good : This AM, move in completion rig. Expect to run cased hole logs and perforate Friday (tomorrow) : TIH with bit & scraper. Circulated. Drum chain on WO rig broke. Repaired in 1 hr. TIH with PSI Wireline and run Cased Hole GR, CBL log. TOH with log tools. Bond good across interval to perforate. TIH w/ 3 1/8 (7 ) perforating gun. Perforated (6 spf) in Gray-Gardner sand. TIH w/ packer, model AD-1, 4 ½. GIH w/ 10 jts. in hole and rig broke down at 4:30pm. WO mechanic. SDFN
5 Drilling Report Page 5 of : Mechanic repaired rig by 10:00am. Finished GIH with packer. Set at 3,050. N/U tree. TIH with swab. Hit fluid at 60 ; pulled from 1500, 2500 and Recovered 9 bbls load water, no oil. SDFN : Shut down for Sunday : This AM, SITP 0#. TIH with swab. Hit fluid at 2900 (150-feet feed-in). Swabbed ½ bbl. water. At 9:00 am TIH with swab. No fluid level. Pulled no water, no oil. At 10 am repeated with same results. TIH to deepen packer to Lowered packer deeper and 3150 ; Swabbed 40 water and 8-10 oil (5 gal.). Made additional swabs every hour with no entry. Last swab had no entry. Loading hole with water and prep to add Goen lime perforations in the AM : This AM, SITP 0#. Go in hole with PSI Wireline perforating gun and perforated 3,184-3,206 (Goen A ) and 3,220-3,226 (Goen B /Caddo). Rigging-up to perform acid job : This AM, SITP 1200#. Opened well for flow 8:00 AM. At 9:00 AM, flowing solid stream 1-1/4 of spent acid water. Will continue flow back as long as well free flows, then swab. In last 24 hours, Went in hole and perforated Goen zones as reported above. Rigged up Mac Oilfield for Acid job (details to follow) Summary: Broke down perfs with 3400#; average treating pressure 2000#; pumped 3000 gal acid, completed with 1500#. Kept rig on standby to swab until swabbing unit is located. PM Update: Opened 8:00 AM (as reported above) and it flowed at 175psi FTP. Recovered spent acid water with some oil, measuring 3 water in frac tank with 3 oil (160 bbls water and 13.5 bbls oil). Oil is greenish black, w/ good light color. Shut-in and lowered packer to 3,181. Swabbed water with last swab with 10-15% oil. Shut well in due to rain and bad weather conditions. Will check in AM and resume flowing well to tanks. Rig is still there and will swab as needed tomorrow. (Cannot get rig out or swabbing unit in; location is a mess according to Jerry) : This AM, after 2 hours swabbed 2 bbls w/ 30% oil, pulling from Packer is leaking. Ordered new packer rubbers and resume swabbing. At 1:30, pulled from 2900 recovering 2 bbls w 10% oil. Backside had 60#. Pulled packer out and observed 13 stands (780 ) soaking in oil, confirming oil is moving up the backside via packer leak. Remove packer & GIH with tubing only. Tubing in hole swab 2 bbls w/ 50% oil : This AM, go in hole and swab open ended: Swab # Recovered Notes /2 bbl 75% oil; 30 min bbl acid water bbl acid water w trace oil bbl acid water w trace oil ½ bbl acid water w trace oil gas on casing side POOH w tubing; GIH w/ tubing and redressed packer. Set packer and resume swabbing: Swab # Recovered Notes /2 bbl 100% oil; 0# on casing, 15# on tubing 7 SN no fluid-gassy 30 min 8 SN 2-gals 25% oil good gas 9 SN 1-1/2 gal 100% oil very gassy : Release and move out completion rig. Shut-in for weekend.
6 Drilling Report Page 6 of : 48 hours Shut-in pressure = uncertain; gauge was not working. Opened well and blew down in 5-10 minutes with possible fluid downhole. Shutin and went to town for new gauge. Returned and installed new gauge showing no pressure after about a two hour shut in. Reopened well and recovered no gas, just a whiff this time of air. Shut in hour Shut-in pressure = 0#. Opened well and observed good 30 second blow of air indicating possible fluid is moving uphole. Tie-in well to frac tanks; have 380 bbls capacity in tank #1, with 500 bbls in standby tank. Leave well open to tanks : 48-hour tubing open to tanks w 0#. SICP 0#. No fluid recovered in tanks. Opened the 1 valve and again observed puff of air, suggesting fluid moving uphole. Will leave open over the weekend to tanks and move-in swab rig Tuesday or as available : 48-hour tubing open to tanks w 0#. SICP 0#. No fluid recovered in tanks. Opened the 1 valve and again observed puff of air, suggesting fluid moving uphole. Will leave open over the weekend to tanks and move-in swab rig Tuesday or as available : Tubing open to tanks w 0#. SICP 0#. No fluid recovered in tanks. Opened the 1 valve and again observed puff of air, suggesting fluid moving uphole. Will leave open to tanks and move-in swab rig Thursday : Tubing open to tanks w 0#. SICP 0#. No fluid recovered in tanks. Opened the 1 valve and again observed puff of air. Move-in swab rig this AM and go in hole with swab as follows: % oil 70% water immediate (SN) 30% oil 70% water immediate (SN) 30% oil 70% water immediate 4 Dry wait 1 hr (SN) 80% oil 20% water wait 1 hr (SN) 30% oil 70% water wait 1-1/2 hr (SN) 40% oil 60% water wait 1-1/2 hr (SN) 35% oil 65% water wait 1 hr Estimate 3 bbls oil and 4 bbls water for the day. Oil has good odor, breaks out easy from the water. Shut well in and will resume in the morning : SITP = 10# (12 hours). Opened well & GIH w/ swab as follows: (SN) 50% oil * immediate (SN) 10% oil (*bottoms) wait 1 hour (SN) 60% oil * wait 1 hour SN 40% oil * wait 1 hour SN 50% oil * wait 1 hour SN 50% oil * wait 1 hour SN 40% oil * wait 1 hour SN 50% oil * wait 1 hour 9 Dry SN trace gas *water is oil streaked, grey filmy appears to be spent acid, KCl or drill fluids. Left well open to tanks. Total fluid recovered today 6 bbls: approx. 3 bbls oil, 3 bbls water. Reports continued on next page
7 Drilling Report Page 7 of : Open tubing pressure = 0#, no fluid recovered overnight in tanks, but observing slight gas vapors. GIH w/ swab as follows: (SN) 90% oil * immediate 2 dry 3181 (SN) 100% spray oil wait 1 hour (SN) 80% oil * wait 1 hour, Had good tail gas blow for 6 minutes SN 60% oil * wait 1 hour SN 50% oil * wait 1 hour SN 60% oil * wait 1 hour SN 50% bubbly oil * wait 1 hour 8 Dry SN gas dropping off *water is oil-streaked, grey filmy appears to be spent acid, KCl or drill fluids. Shut down for the day (Saturday). Left open to tanks; plan to resume Monday. Total fluid recovered today 4 bbls: approx. 3 bbls oil, 1 bbl water : Open to tanks; no activity (Sunday) : Open tubing pressure = 0#, (41 hours) no fluid recovered. GIH w/ swab as follows: (SN) 60% oil ** immediate 2 dry 3181 (SN) a little tail gas wait 1 hour (SN) 40% oil ** wait 1 hour, SN 30% oil ** wait 1 hour SN 20% oil ** wait 1 hour SN 20% oil ** wait 2 hours SN 30% oil ** **water is clearing up. Shut down for day and release swab rig. Sending water and oil samples for analysis and evaluating for stimulation : Awaiting samples to be analyzed; evaluating for stimulation. Surface operations suspended.
D & V Oil Co. LP. Daily Completion Report - University CN A #6 API # /23/2016. Perfs ' ' Activity :
Daily Completion Report - University CN A #6 API # 42-105-42334 12/23/2016 Activity at Report Time: Perfs - 2512' - 2632' Depth at Report Time Put Well on Production 2655' - PBTD Activity : Arrive Location.
More informationFORGE Energy UL 21 Freedom 1 API Number:
FORGE Energy UL 21 Freedom 1 API Number: 42-371-39061 07/13/2013 RU E&P WL Open well RIH correlate GR log to get on depth. Run BL found cement to surface. Tag 7566' PBTD. RU Rising Star test lines to 5000
More informationBENEDUM (DEVONIAN, GAS) API # UPTON COUNTY, TX DRILLING PERMIT # DAILY REPORTS
11/17/2011 11/18/2011 11/19/2011 AFE dated 11/18/2011 - pull tbg out of hole and make a mill run. Run packer on tbg and attempt to reestablish production from Devonian Formation. MIRU Great Basin Pulling
More informationENDEAVOR ENERGY RESOURCES
ENDEAVOR ENERGY RESOURCES Lease WELL NO FIELD PBTD PERFORATIONS FOREMAN TOOLPUSHER API NUMBER DATE University 5-20-21 #1H 14,223' Tony Cody 07/02/13 OART WEATHER FLUID SUMMARY W/O UNIT DATA W/L UNIT DATA
More informationOil Well Potential Test, Completion or Recompletion Report, and Log
Tracking No.: 102948 Status: Submitted RAILROAD COMMISSION OF TEXAS Oil and Gas Division API No. 42- Oil Well Potential Test, Completion or Recompletion Report, and Log 1. FIELD NAME (as per RRC Records
More informationWellwork Chronological Regulatory Report
Well Name: UNIVERSITY 49 #0808H Field: Lin (Wolfcamp) S/T/R: / / County, State: Location Desc: Operator: Enduring Resources, LLC Project Type: Completion District: Southern Project AFE: DV02151 AFE's Associated:
More informationOil Well Potential Test, Completion or Recompletion Report, and Log
Tracking No.: 15871 Status: Submitted RAILROAD COMMISSION OF TEXAS Oil and Gas Division API No. 42- Oil Well Potential Test, Completion or Recompletion Report, and Log 1. FIELD NAME (as per RRC Records
More informationRAILROAD COMMISSION OF TEXAS OIL WELL POTENTIAL TEST, COMPLETION OR RECOMPLETION REPORT, AND LOG
RAILROAD COMMISSION OF TEXAS 1701 N. Congress P.O. Box 12967 Austin, Texas 78701-2967 Status: Form W-2 OIL WELL POTENTIAL TEST, COMPLETION OR RECOMPLETION REPORT, AND LOG Date: Tracking No.: Approved 10/13/2015
More informationRAILROAD COMMISSION OF TEXAS OIL WELL POTENTIAL TEST, COMPLETION OR RECOMPLETION REPORT, AND LOG
RAILROAD COMMISSION OF TEXAS 1701 N. Congress P.O. Box 12967 Austin, Texas 78701-2967 Status: Form W-2 OIL WELL POTENTIAL TEST, COMPLETION OR RECOMPLETION REPORT, AND LOG Date: Tracking No.: Approved 06/29/2015
More informationPROPOSED NEW SUB- CODE 1 RIG UP AND TEAR. Possibly Fits into Existing Code. 7/26/2018 Review PROPOSED NEW CODE EXISTING OPERATION
NW NW 1 RIG UP AND TAR 1 no sub-code RIG UP AND TAR DOWN Start: Rig released from previous well, nd: Rig fully rigged up, acceptance tests successfully completed, and signed off. DOWN 1 1 Rig Under Tow
More informationRAILROAD COMMISSION OF TEXAS OIL WELL POTENTIAL TEST, COMPLETION OR RECOMPLETION REPORT, AND LOG
RAILROAD COMMISSION OF TEXAS 1701 N. Congress P.O. Box 12967 Austin, Texas 78701-2967 Status: Form W-2 OIL WELL POTENTIAL TEST, COMPLETION OR RECOMPLETION REPORT, AND LOG Date: Tracking No.: Approved 03/16/2016
More informationTerrace Petroleum Corporation Cunning Wolf UL No. 602H, 1980 FNL and 467 FWL Section 6, Block 23, ULS Pecos County, Texas
Terrace Petroleum Corporation Cunning Wolf UL No. 602H, 1980 FNL and 467 FWL Section 6, Block 23, ULS Pecos County, Texas 3-29-13 DAY 1 Previously built location, roads, built and lined reserve pits. Move
More informationRAILROAD COMMISSION OF TEXAS OIL WELL POTENTIAL TEST, COMPLETION OR RECOMPLETION REPORT, AND LOG
RAILROAD COMMISSION OF TEXAS 1701 N. Congress P.O. Box 12967 Austin, Texas 78701-2967 Status: Date: Tracking No.: Form W-2 OIL WELL POTENTIAL TEST, COMPLETION OR RECOMPLETION REPORT, AND LOG Submitted
More informationWellwork Chronological Regulatory Report
Well Name: UNIVERSITY 09A #1003H Field: Lin (Wolfcamp) S/T/R: / / County, State: Location Desc: Operator: Enduring Resources, LLC Project Type: Completion District: Southern - ERPBU Project AFE: DV02251
More informationFORGE Energy UL 21 Pahaska 1H API Number:
FORGE Energy UL 21 Pahaska 1H API Number: 42-495-33740 10/26/2016 07:00 HPJM 07:15 Install 1502 Adapter Flanges to Well Head. RU Pump Truck test lines to 1000 PSI no leaks. Load hole w/ 15 bbls fresh water.
More informationElevation Resources DAILY OPERATIONS. Clean and prep location, MIRU pulling unit to mill liner top
DAYS FROM SPUD: 35 DAYS ON 0 Mar 1 2016 RIG SUPERVISOR: Tyler Clean and prep location, MIRU pulling unit to mill liner top Blade location, set anchors. Bring surface and int CSG valves to surface and fill
More informationPerforating Options Currently Available in Horizontal Shale Oil and Gas Wells. Kerry Daly, Global BD Manager- DST TCP
MENAPS 2013 Perforating Options Currently Available in Horizontal Shale Oil and Gas Wells Kerry Daly, Global BD Manager- DST TCP MENAPS 13-17 WELL FLOW MANAGEMENT TM Scope/ Contents: MENAPS 13-17 Study
More informationOil Well Potential Test, Completion or Recompletion Report, and Log
Tracking No.: 16947 Status: Submitted RAILROAD COMMISSION OF TEAS Oil and Gas Division API No. 42- Oil Well Potential Test, Completion or Recompletion Report, and Log 1. FIELD NAME (as per RRC Records
More informationBlowout during Workover Operation A case study Narration by: Tarsem Singh & Arvind Jain, OISD
1. Introduction An incident of gas leakage from a well took place during workover operations. Subsequently, the gas caught fire on the fourth day in which twelve persons were injured. Two contract workers,
More informationDrilling Morning Report
REPORT DATE 5/0/200 Report # AFE # Casing OD(in) WT(lbs/ft) Grade Btm MD(ft) Btm TVD(ft) DCRB04 TVD: 32 MD: 32 Progress: 32 Planned TD:,500 Current Hole Size: Days From Spud: Spud Date: 5//0 Days on Well:
More informationBLACK HILLS PLATEAU PRODUCTION COMPANY
BLACK HILLS PLATEAU PRODUCTION COMPANY DRILLING PROGRAM Homer Deep Unit 9 11CH SHL: 300 FNL, 200 FWL, NWNW Sect. 9 T8S R98W BHL: 1350 FSL, 2100 FEL NWSE Sect. 15 T8S R98W Garfield & Mesa Counties, Colorado
More informationOIL/GAS WELL COMPLETION REPORT. Well Name and Number Surveyed elevation (feet): KB GL
1800 Washingn Blvd. Baltimore Maryland 21230 OIL/GAS WELL COMPLETION REPORT Permit No. Name of Operar Address Well Name and Number Surveyed elevation (feet): KB GL Well Location Field (If wildcat, so state)
More informationPractice Exam IADC WellSharp Driller and Supervisor
Workover & Completion Day 4 1. In a workover operation of a shut in well a Lubricator is being used together with a Wireline BOP / Wireline Valve. Which Barrier is classified as the Primary Barrier? A.
More informationRAILROAD COMMISSION OF TEXAS OIL WELL POTENTIAL TEST, COMPLETION OR RECOMPLETION REPORT, AND LOG
RAILROAD COMMISSION OF TEXAS 1701 N. Congress P.O. Box 12967 Austin, Texas 78701-2967 Status: Form W-2 OIL WELL POTENTIAL TEST, COMPLETION OR RECOMPLETION REPORT, AND LOG Date: Tracking.: Approved 03/11/2015
More informationColorado Oil and Gas Conservation Commission
Colorado Oil and Gas Conservation Commission http://cogcc.state.co.us/ FORM 5A Completed Interval Report INDUSTRY TRAINING Denver, Colorado November 27, 2012 Form 5A Completed Interval Report Introduction
More informationZarvona Energy LLC DAILY OPERATIONS
DAYS FROM SPUD: 120 DAYS ON 0 Jun 28 2016 RIG SUPERVISOR: Tyler Dupriest MIRU pulling unit MIRU pulling unit, move in and tally TBG. SDFN RIH with RBP DAYS FROM SPUD: 121 DAYS ON 1 Jun 29 2016 RIG SUPERVISOR:
More informationUniversity 31E 4. Ward County, TX. Rig: Union Drlg Rig 229. AFE: $1,393, DHC: $761, WI: Notes: Workover:
Zone: War-Wink Cherry Canyon TD: 7250' Rig: Union Drlg Rig 229 Status: WOC Spud Date: 1/26/2013 RR Date: 2/12/2013 First Sales: AFE: $1,393,293.00 DHC: $761,963.00 WI: Notes: Date Activity 11/14/2012 11/14/12
More informationAPPENDIX A1 - Drilling and completion work programme
APPENDIX A1 - Drilling and completion work programme Information about the well and drilling To the extent possible, the international system of units (SI) should be adhered to, and the drilling programme
More informationEP WELLS DAILY OPERATIONS REPORT Report 29 05/19/2017
5/2/27 5:23:5 Report Version: 4..6R9 Generated from data in EDM/Opens/PROFILE Report 29 5/9/27 Company Type WBS No/API No PERMIAN Development UNIVERSITY 9 PW UNIT 56H UNIVERSITY 9 PW UNIT 56H 32656 / 4233326.
More informationTexas Administrative Code
TITLE 16 PART 1 CHAPTER 3 RULE 3.13 Texas Administrative Code ECONOMIC REGULATION RAILROAD COMMISSION OF TEXAS OIL AND GAS DIVISION Casing, Cementing, Drilling, Well Control, and Completion Requirements
More informationEP WELLS DAILY OPERATIONS REPORT Report 38 07/18/2017
1 Company Type bore WBS No/API No PERMIAN Development 30265014 / 4230133171.00 Event Summary Event Type Completion only Event Start Date 04/28/2017 Days on Location 37.00 Objective Install Completion Original
More informationAbandonment Program for Paramount Fort Liard F 36
Abandonment Program for Paramount Fort Liard F 36 Well Name: Paramount et al Liard F 36 Area: 60 0 10 N, 123 0 15 W Location: Latitude: 60 0 05 27 Longitude: 123 0 22 00 UWI: 300F366010123150 WID: 1841
More informationDisposal/Injection Well Pressure Test Report (H-5)
RAILROAD COMMISSION OF TEXAS Disposal/Injection Well Pressure Test Report (H-5) Lauryn McFarland Engineering Technician Summary When Mechanical Integrity Test (MIT) is required How to file MIT How to perform
More informationAMERICAN ENERGY - PERMIAN BASIN, LLC UL Daily Drilling Partner Summary
AEPB WELL NO. Report End Date: Report Number: 1 Rig: INTEGRITY, 3 Projected Days (days): 0 Drilling Days: : 70 : 0 Planned VS (ft): Current VS (ft): 42383383570000 MIRU MIRU INTEGRITY 3. 70 Longitude Orig
More informationZarvona DAILY WORKOVER / COMPLETION REPORT
Lease/Well No: CURRENT WELL TEST: PURPOSE OF WORK: MIRU service companies/start frac PULLING UNIT: KOP 10,429' TD: 15,906' KB ABOVE GL: 30 10,713' PBTD: 15,885' INT CSG: 60 10,998' TVD: 10,950' PROD CSG:
More informationWell Control Drill Guide Example Only. Drill Guide is the list of drills, questions and attributes that are in DrillPad.
Well Control Drill Guide Example Only Drill Guide is the list of drills, questions and attributes that are in DrillPad. This Well Control Drill Guide will be used in conjunction with the rig-specific well
More informationColorado Oil and Gas Conservation Commission (COGCC) Completed Interval Report, Form 5A Data Field Definitions
NOTE: Changes to the Form 5A, effective June 1, 2012, to accommodate the disclosure requirements are indicated by a preceding asterisk (*) and bold italics. All other fields are unchanged. FORM 5A HEADING
More informationWhy Do Not Disturb Is a Safety Message for Well Integrity
Why Do Not Disturb Is a Safety Message for Well Integrity Presented at the Practical Well Integrity Conference 9-10 December, 2014 in Houston By Ron Sweatman, Principal Advisor, Reservoir Development Services,
More informationBANDAR PANJI-1 WELL CONTROL INCIDENT REPORT
BANDAR PANJI-1 WELL CONTROL INCIDENT REPORT EXECUTIVE SUMMARY I was requested by management to review the Banjar Panji-1 drilling operations from the conception of the Integrated Drilling Management approach
More informationPetroleum Development
Petroleum Development Original Idea... It has been said, "oil is first found in the minds of explorationists." Usually, this is the case. An explorationist, utilizing available data and information, will
More informationW I L D W E L L C O N T R O L FLUIDS
FLUIDS Fluids Learning Objectives You will learn about different fluids that can be used in well control. You will become familiar with the characteristics and limitations of fluids. You will learn general
More informationDeepwater Horizon Incident Internal Investigation
Not all Information has been verified or corroborated. Subject to review based on additional information or analysis. Deepwater Horizon Incident Internal Investigation 1 Areas of Discussion Investigation
More informationPHE KE30-A8 WORKOVER PROGRAM
PHE WMO KE30-A8 WORKOVER PROGRAM PHE KE30-A8 WORKOVER PROGRAM Prepared by: Ross Webber. Hendra Wahyudi. Chandra Maulana. George Lattimore Adi Benanjaya Achmad Soendaroe. Tri Wiyono DRILLING ENGINEER SR.
More informationOCEAN DRILLING PROGRAM
BIH OCEAN DRILLING PROGRAM www.oceandrilling.org Scientifi c Application Packers A packer is an inflatable rubber element that inflates to seal the annular space between the drill string and the borehole
More informationExtended leak off testing
Extended leak off testing Rev: 1.0 03/01/01 Purpose To ensure minimal operational time and risk exposure to personnel, process, production and equipment. The following extended leak off test procedures
More informationCOGCC OPERATOR GUIDANCE MECHANICAL INTEGRITY TEST GUIDANCE: PRACTICES AND PROCEDURES
COGCC OPERATOR GUIDANCE MECHANICAL INTEGRITY TEST GUIDANCE: PRACTICES AND PROCEDURES DOCUMENT CONTROL: Created Date: May 06, 2013 Last Updated Date: September 15, 2015 Last Updated By: Stuart Ellsworth
More informationRailroad Commission of Texas
Workshop Railroad Commission of Texas Casing, Cementing, Drilling Well Control, and Completion Requirements Chairman Houston, Barry Texas T. Smitherman Commissioner David J. Porter Commissioner December
More informationNorth American sealing solutions Bridge Plug Ball Drop Frac Plug Caged Ball Frac Plug
North American sealing solutions Bridge Plug Ball Drop Frac Plug Caged Ball Frac Plug The North American Sealing Solutions composite bridge plug, caged ball and ball drop (flow thru) frac plug provide
More informationBP SIT Testing Franks Facility Lafayette
BP SIT Testing Franks Facility Lafayette General Information Status: Franks test well Lafayette La. Rig: Franks Test Rig Casing: 13 3/8, 0 to 4,600 Workstring: 4 ½ IF Brine: Fresh Water Directional: Straight
More informationCasing Design. Casing Design. By Dr. Khaled El-shreef
Casing Design By Dr. Khaled El-shreef 1 Casing Design CONTENTS Function of Casing Casing Types & Tools Strength Properties Casing Specification Casing Design 2 1 RUNNING AND CEMENTING CASING Reasons for
More informationSPE Forum: Source Control for Wells in Shallow Water. Lars Herbst, Gulf of Mexico Regional Director
SPE Forum: Source Control for Wells in Shallow Water Lars Herbst, Gulf of Mexico Regional Director Agenda Introduction and Background Historical Well Control Events Scope of Discussion Scenario Driven
More informationRULES OF THE OIL AND GAS PROGRAM DIVISION OF WATER RESOURCES CHAPTER DRILLING WELLS TABLE OF CONTENTS
RULES OF THE OIL AND GAS PROGRAM DIVISION OF WATER RESOURCES CHAPTER 0400-52-06 DRILLING WELLS TABLE OF CONTENTS 0400-52-06-.01 Drilling Equipment 0400-52-06-.03 Casingheads 0400-52-06-.02 Blowout Prevention
More informationHOT OILING OPERATIONS ALL HSE PRC 172. Approved By: Manager, HSE Performance Assurance. Table of Contents
Owner: HSE Performance Assurance ALL HSE PRC 172 Approved By: Manager, HSE Performance Assurance Retention Code: CG01 CA Revised: March 2015 Review Frequency: Five years or less Table of Contents 1.0 Purpose...
More informationFREQUENTLY ASKED QUESTIONS
What are some applications in which you ve successfully used this product? New Completions - Stage by Stage Diversion Between Frac plugs for Intra-Stage Diversion Replace Frac Plugs with Perf PODs - Full
More informationSqueeze Cementing. Brett W. Williams Cementing Technical Advisor January 2016 Tulsa API Meeting
Squeeze Cementing Brett W. Williams Cementing Technical Advisor January 2016 Tulsa API Meeting Definition Squeeze Cementing is the process of applying hydraulic pressure to force or squeeze a cement slurry
More informationWELL NO: BJN-8. Lower master valve
WELL NO: BGN-8.; LOC: BGH Well BGN-8 came into production on 9 th Feb. 2009. Initially the FTHP = 4000 psi, CP=2400 psi and 5 1 / 2 9 5 / 8 annulus pressure = 600 psi. The well was produced at Baghjan
More informationAdvanced Applications of Wireline Cased-Hole Formation Testers. Adriaan Gisolf, Vladislav Achourov, Mario Ardila, Schlumberger
Advanced Applications of Wireline Cased-Hole Formation Testers Adriaan Gisolf, Vladislav Achourov, Mario Ardila, Schlumberger Agenda Introduction to Cased Hole Formation tester Tool specifications Applications
More informationSuccessful Deployment of a Long Gun String Via Intelligent Coiled Tubing
Successful Deployment of a Long Gun String Via Intelligent Coiled Tubing Parry Hillis: Technical Manager BakerHughes David Ayre: BP Well Perforation Specialist Jim Gilliat: TCP/DST Business Development
More informationCoal Bed Methane (CBM) Permeability Testing
Coal Bed Methane (CBM) Permeability Testing WTN Network Meeting April 28-29, 2011 ExxonMobil Exploration / Well Testing Team CBM Flow Characteristics Flow mechanism Gas desorbs when pressure drops below
More informationA Longer Lasting Flowing Gas Well
2018 Artificial Lift Strategies for Unconventional Wells Workshop Cox Convention Center, February 4 7, 2018 A Longer Lasting Flowing Gas Well New Dual-Tubing Flowing Design Paul Edwards, Production Engineer,
More informationIWCF Equipment Sample Questions (Combination of Surface and Subsea Stack)
IWCF Equipment Sample Questions (Combination of Surface and Subsea Stack) 1. Given the volumes below, how much hydraulic fluid will be required to carry out the following operations (no safety margin)?
More informationINTERMEDIATE CASING SELECTION FOR COLLAPSE, BURST AND AXIAL DESIGN FACTOR LOADS EXERCISE
INTERMEDIATE CASING SELECTION FOR COLLAPSE, BURST AND AXIAL DESIGN FACTOR LOADS EXERCISE Instructions Use the example well data from this document or the powerpoint notes handout to complete the following
More informationStudy Guide IADC WellSharp Driller and Supervisor
Times to Flow Check: Before pulling out of the hole Before pulling BHA into the BOP When bit is pulled into the casing Increase in cuttings at shakers with same ROP On connections Upon abnormal trip tank
More informationHPHT Annular Casing Packer. Obex Annular Casing Packer
HPHT Annular Casing Packer Obex Annular Casing Packer Industry Challenge Casing packer to support second stage cement Reduce hydrostatic pressure on formation Get cement to surface Annular gas migration
More informationThe key to connectivity
The key to connectivity Kerry Daly, Global BD Manager, Tubing Conveyed Perforating (TCP) First published by Oilfield Technology, November 2015 Connecting oil or gas-bearing formations with the wellbore
More informationOklahoma Corporation Commission Oil & Gas Conservation Division Post Office Box Oklahoma City, Oklahoma Rule 165:
Oklahoma Corporation Commission Oil & Gas Conservation Division Post Office Box 52000 Oklahoma City, Oklahoma 73152-2000 Rule 165: 10-3-25 Form 1002A API No.: 35073254870000 OTC Prod. Unit No.: 073-218559
More informationCompletions & Workovers Module 1.9
Completions & Workovers Module 1.9 CAPPA CAPPA Level 1 LAST REVISED March 20, 2013 Completions & Workovers Module Summary Students will learn what is involved in a well completion, how a completion is
More information1. UPDATE 12/12/2014: What wells are regulated under the MIA Program? Must they be drilled, stimulated, and completed? Must they be in production?
PLEASE NOTE THAT ALL USES OF THE WORD OPERATOR IN THIS DOCUMENT REFER TO THE ACT 13 DEFINITION OF WELL OPERATOR AND THUS, REFERENCE THE PERMIT HOLDER (PERMITEE) FOR THE WELL. ANY ENFORCEMENT ACTIONS UNDER
More informationHydro-Mech Bridge Plug
Manual No: 0620000303 Revision: F Approved By: Quality Engineer Date: 2014-9-9 Hydro-Mech Bridge Plug DESCRIPTION: Map Hydro-Mech Bridge Plug is hydraulically actuated and mechanically set. Compact, with
More informationSUBSEA KILL SHEET EXERCISE No. 5
Subsea Kill Sheet Exercise No. 5 SUBSEA KILL SHEET EXERCISE No. 5 Name: Date: Complete the Subsea vertical kill sheet provided on pages 2 and 3. Then answer questions 1 to 12. Please round calculations
More informationNeoProducts, LLC 1201 Dealers Ave. Harahan, LA Ph:
Please read this entire document. It concerns all 9⅝ Vented Thru-tubing Bridge Plugs Read this document before proceeding to NeoProducts Recommended Best Practices for 9⅝ vented T- TBPs. Whenever running
More informationPasquale Imbò e Marco Pelucchi ENI S.pA;
7th European Gas Well Deliquification Conference Innovative Failsafe Capillary Injection System Resolves Liquid Loading in Gas Well with a Cost- Effective Solution that Maintaining Production and Well-Safety
More informationBridge Plugs, Ball Drop & Caged Ball Plugs For Zone Isolation
Bridge Plugs, Ball Drop & Caged Ball Plugs For Zone Isolation ADVANTAGE composite bridge plug, caged ball and ball drop (flow thru) frac plug provide a means to isolate multiple zones during high pressure
More informationfloat equipment OPERATING MANUAL TYPE 505/506 Float Equipment 1. INFORMATION & RECOMMENDATIONS Float Equipment
Contents 1. GENERAL INFORMATION & RECOMMENDATIONS 1 2. INSTALLATION FLOAT EQUIPMENT 2 2.1 PRE-USE FIELD INSPECTION 2 2.2 POSITION FLOAT ON CASING STRING 3 3. RUNNING OF FLOAT EQUIPMENT 3 3.1 CIRCULATION
More informationInvestigation of Loss of Well Control Eugene Island Block 277 OCS-G Well A-2 Off the Louisiana Coast July 6, 2001
OCS Report MMS 2002-040 Investigation of Loss of Well Control Eugene Island Block 277 OCS-G 10744 Well A-2 Off the Louisiana Coast July 6, 2001 U.S. Department of the Interior Minerals Management Service
More informationOIL AND GAS DOCKET NO
OIL AND GAS DOCKET NO. 09-0241077 THE APPLICATION OF GILBOW TANK TRUCK SERVICE, INC., TO DISPOSE OF OIL AND GAS WASTE BY INJECTION INTO A POROUS FORMATION NOT PRODUCTIVE OF OIL OR GAS, GILBOW WELL NO.
More informationDynamic Underbalance (DUB)
Dynamic Underbalance (DUB) Perforating Cam Le Perforating Product Champion Agenda Overview DUB Software Tools Case histories 2011 HALLIBURTON. ALL RIGHTS RESERVED. 2 Dynamic Underbalance Software Dynamic
More informationChapter 5 HORIZONTAL DRILLING
Chapter 5 HORIZONTAL DRILLING Chapter 5 How much money am I about to put on the table for a horizontal well? Did I do sufficient planning? Keys to Successful Horizontal Wells Multi-disciplined teams working
More informationFRAC FLUIDS AND WATER USAGE Evaluating The Commercial Viability and Success In Using Water-Free Fracs
FRAC FLUIDS AND WATER USAGE Evaluating The Commercial Viability and Success In Using Water-Free Fracs Overview of Presentation BlackBrush Oil & Gas Natural Gas Liquids (NGLs) as frac fluid. Advantages
More informationSubsea Safety Systems
Subsea Safety Systems The ELSA-HP has been developed to service the high pressure horizontal tree completion and intervention market. With systems designed and qualified up to 15,000 psi, 250 degf and
More informationDaily Drilling Report
Daily Drilling Report Well Name UTL 38-17-1H Report Date 05/05/2014 Field University Lands Supervisor Nate Baxter Report No. 97 Location 990' FNL & 300' FEL Supervisor 2 Kevin Evans DFS 94 County Ward
More informationCasing and Cementing Requirements
Directive PNG005 May 2018 Revision 2.0 Governing Legislation: Act: The Oil and Gas Conservation Act Regulation: The Oil and Gas Conservation Regulations, 2012 Order: 148/18 Record of Change Revision Date
More informationRULE 36 & H 2 S SAFETY
OUTLINE OF RULE 36 RULE 36 & H 2 S SAFETY RULE 36 IS A SAFETY RULE DESIGNED TO PROTECT THE GENERAL PUBLIC FROM THE HAZARDS OF H 2 S RESULTING FROM INTENTIONAL AND ACCIDENTAL RELEASES. PROPERTIES OF H 2
More informationPerforation Design for Well Stimulation. R. D. Barree Barree & Associates LLC
Perforation Design for Well Stimulation R. D. Barree Barree & Associates LLC Typical Shaped Charge Primer charge Main explosive charge Case or container Detonating cord groove ¾ point of initiation Liner
More informationPERMIAN RESOURCES, LLC UL Daily Drilling Partner Summary
PRES WELL NO. Report End Date: 5/19/2016 Report Number: 3 Rig: INTEGRITY, 3 Projected Days (days): 0 Drilling Days: : : 0 Planned VS (ft): Current VS (ft): WOC WOC, CONTACTED TRRC, SPOKE TO ABRAHAM, ADVISED
More information1. The well has been shut in on a kick and the kill operation has not started.
Well Control Methods Day 2 1. The well has been shut in on a kick and the kill operation has not started. Shut in drill pipe pressure Shut in casing pressure 500 psi 700 psi After stabilization, both pressures
More informationDB Bridge Plug. Features. Benefits. Applications
DB Bridge Plug The WELLFIRST Premium Cast Iron Bridge Plug designed to run on electric line. Rated between 2000-10000-psi differential, and 300 F from above and below. Features Field Proven Design Constructed
More informationFinal Well Report. Revision: Version 0. Corp) Hole Name: Flat Bay Test Hole # 5 Rig: Duralite 800
Final Well Report Revision: Version 0 Operating Company: Vulcan Minerals Inc. (Investcan Energy Corp) Hole Name: Flat Bay Test Hole # 5 Rig: Duralite 800 Field: Flat Bay Location: Western Newfoundland,
More informationCHDT Cased Hole Dynamics Tester. Pressure testing and sampling in cased wells
CHDT Cased Hole Dynamics Tester testing and sampling in cased wells Applications Evaluation of old wells for bypassed hydrocarbons Development of critical economic data for well evaluation Reduced-risk
More informationWorked Questions and Answers
Worked Questions and Answers A Learning Document for prospective Candidates For the Rotary Drilling Well Control Test Programme Copyright, IWCF June 2000 Revision No.1, November 2000 IWCF 2000 page 1 of
More informationSCORPION HIGH-QUALITY, FULLY COMPOSITE PLUGS
SCORPION HIGH-QUALITY, FULLY COMPOSITE PLUGS A DIFFERENT KIND OF ENERGY COMPANY Nine Energy Service isn t your typical oilfield services company. Our success stems from a culture driven by performance
More informationWellCAP IADC WELL CONTROL ACCREDITATION PROGRAM
WellCAP IADC WELL CONTROL ACCREDITATION PROGRAM WELL SERVICING OPERATIONS (WIRELINE, COILED TUBING & SNUBBING) CORE CURRICULUM AND RELATED FORM WCT-2WSI INTRODUCTORY LEVEL For information on how an course
More informationEXAMINER S REPORT AND RECOMMENDATION STATEMENT OF THE CASE
OIL AND GAS DO0KET NO. 01-0249550 THE APPLICATION OF REGENCY FS LP UNDER RULE 36 AND RULE 46 TO DISPOSE OF OIL AND WASTE CONTAINING HYDROGEN SULFIDE GAS INTO ITS TILDEN GPI WELL NO. 1, TILDEN, S. (WILCOX
More informationPTRT 1471: Exploration and Production I. Chapter 6: Drilling and Well Completion
PTRT 1471: Exploration and Production I Chapter 6: Drilling and Well Completion Well Planning Drilling is a major investment (over $100m for offshore) Planning is aimed at maximizing investment Wells are
More informationAir and Gas Drilling
Air and Gas Drilling Air and Gas Drilling It is a technique in which the more common drilling fluids, (water or mud) are replaced by highly compressible Air or Natural gas. But Compressibility makes pressure
More informationAppalachian Basin Gas Well. Marietta College, Marietta, Ohio June 7-8, Development. Robert McKee, P.E. Design Engineer Multi Products Company
Appalachian Basin Gas Well Marietta College, Marietta, Ohio June 7-8, 2010 Casing Plunger Applications & Development Robert McKee, P.E. Design Engineer Multi Products Company Casing Plunger A.L. Lift Without
More informationW I L D W E L L C O N T R O L PRESSURE BASICS AND CONCEPTS
PRESSURE BASICS AND CONCEPTS Pressure Basics and Concepts Learning Objectives You will be familiarized with the following basic pressure concepts: Defining pressure Hydrostatic pressure Pressure gradient
More informationWELL SUSPENSION AND ABANDONMENT GUIDELINES AND INTERPRETATION NOTES OFFICE OF THE REGULATOR OF OIL AND GAS OPERATIONS
WELL SUSPENSION AND ABANDONMENT GUIDELINES AND INTERPRETATION NOTES OFFICE OF THE REGULATOR OF OIL AND GAS OPERATIONS CONSULTATION AND ENGAGEMENT DRAFT MAY 17, 2016 If you would like this information in
More informationCased-Hole Logging Environment
Cased-Hole Logging Environment 2 Planning a Production Logging Job Planning is an important part of a production logging job. Frequently these jobs can only be done in safety during daylight. Thus, the
More informationVortexFlow DX (Downhole) Tool Installation Instructions
VortexFlow DX (Downhole) Tool Installation Instructions www.vortextools.com Page 1 of 10 The VortexFLOW tools are based upon Technology that is a result of U.S.A. patents 6,151,751; 6,659,118; 6,749,374;
More information