Description Supply pressure Pressure range Connection Device Page max. bar bar thread

Transcription

1 Pressure Regulators Supply pressure Pressure range onnection Device Page max. bar bar thread Maxi -Series, robust, interlockable / 17 G¼ - G1 R0, R1.0 made of plastic, also for liquids 1,5 0 4 / 1 G G1 R035 R with external feedback G¼ R18.04 Midi -Series / 17 G¼ - G½ R10, R11.05 extremely robust, high flow rate / 17 G¼ - G3 R Series D, made of aluminium /die-cast zinc / 15 G G RD.08 with joint supply / 16 G G½ R, R pressure regulator / 16 G¼ and G 3 8 RM adjustment dial pressure regulator / 11 G¼ - G R11 R41.1 Regulators.01

2 Maxi Pressure Regulator R0 / R1 Piston-operated high-capacity regulator of modular design with exchangeable inserts. an be interlocked with filter or lubricator without double nipples. Each maxi regulator may be taken from a fixed line in seconds simply by removing the mounting bolts. Supply pressure max. 1 bar djustment R0: by plastic knob with snap-lock R1: by T-handle with locknut G¼ on both sides of the body, screw plugs supplied Temperature range R0: 0 to 50 / 3 F to 1 F R1: 0 to 80 / 3 F to 176 F Material ody: zinc die-cast Spring cage: zinc die-cast, adjusting knob made of with glass fibre-reinforced plastic Elastomer: NR/una-N Inner valve: brass and plastic Dimensions K v - Flow onnection Pressure Order Preis value rate thread range number Maxi pressure regulator supply pressure max. 1 bar, relieving, without pressure R G¼ R , R , R , R0-0D 170, G R , R , R , R0-03D 170, G½ R , R , R , R0-04D 170, G¾ R , R , R , R0-06D 170, G R , R , R , R0-08D 170,00 G 1 4 up to G1 R0 Special options, add the appropriate letter T-handle including locknut R1-0.. o. Mehrpr. NPT connection thread R N +10,00 non-relieving without relieving function R.-0..K +,50 R1 ccessories pressure Ø 63 mm, 0 * bar, G¼ up to 16 bar M630-..* 10,50 Ø 63 mm, 0 5 bar, G¼ up to 5 bar M ,00 mounting bracket assembly at spring cage W ,50 mounting nut made of plastic M45x1,5K 3,00 made of aluminium M45x1,5 6,00 set of brackets made of steel MK ,00 90 G¼ Ø R0 MK W45-0 * 0 = 0.5 bar, 04 = bar, 10 = 0 10 bar, 5 = 0 5 bar R0-0.0

3 Plastic Pressure 000 Regulator R035 R0950 Modular regulator easy to interlock with other regulators, filters or filter regulators of the same series, without the need for double nipples or any other fittings. sensitive rolling diaphragm allows good pressure regulation. compressed air, non-corrosive gases or liquids Supply pressure max. 1,5 bar, max. 10 bar for R035, max. 16 bar bei R04 djustment by plastic knob with snap-lock, R035 without snap-lock G 1 8 on both sides of the body (G¼ at R095), one screw plug supplied Temperature range 0 to 50 / 3 F to 177 F Material ody: nylon, POM at R035 and R04 Elastomer: NR/una-N Inner valve: brass Thread insert: brass value rate thread range number G 1 8 up to G1 Pressure regulator Versorgungsdruck supply pressure max. 13 max. bar 1,5 bar, for series R035 max. 10 bar, Versorgungsdruck for series max. R04 13 max. bar16 bar, relieving, without pressure G R ,50 for battery assembly, see also catalogue page "regulator for joint supply" 0 6 R035-01R 0, G¼ 0 4 R04-0 6, R04-0 6, R04-0D 6, G R , R , R050-03D 38, G½ 0 4 R , R , R05-04D 41, G½ 0 4 R , R , R075-04D 51, G¾ 0 4 R , R , R080-06D 76, G1 0 4 R , R , R095-08D 190,00 R R R035 R04-01R Special options, add the appropriate letter non-relieving without relieving function, also for liquids R K +,50 ccessories pressure Ø 3 mm, 0 * bar, G 1 8, max. 1 bar for R035 M * 11,00 Ø 40 mm, 0 * bar, G 1 8 for R04 M * 9,50 Ø 50 mm, 0 * bar, G 1 8 for R050 to R080 M * 9,50 Ø 63 mm, 0 * bar, G¼ for R095 M * 10,50 mounting bracket made of steel, mounting nut at the device for R04 W ,00 for R050 to R080 W4-01 9,50 set of brackets made of steel for R095 W00-0 4,00 connection clips for R ,50 R G 1 8 for R095 G¼ R035 R095 W30-01 series D Ø E F K L R R R050/ R R R W4-01 R035 * 1 at 10 bar supply pressure, 6 bar outlet pressure and 1 bar pressure drop * 04 = 0 4 bar, 06 = bar, 10 = 0 10 bar, 16 = 0 16 bar ccessories and mounting brackets: see chapter for FRL service units Gauges: see chapter for measuring devices R035-01R battery assembly R035 assembly with connecting clips R

4 Pressure Regulator with External Feedback R18 Diaphragm pressure regulator in small design for "feedback systems" in conjunction with volume flow boosters. Due to the external feedback, regulation is significantly improved and the flow rate increased. compressed air and non-corrosive gases Supply pressure max. 16 bar ir consumption approx. 3 bis 6 l/min djustment by handwheel with snap-lock, for panel mounting External Feedback should be installed at the outlet of the booster, e.g. at the port, or at the outlet pipe. This will measure the pressure drop at the output of the booster and the pilot pressure will be readjusted. Relieving function relieving G¼ on both sides of the body, screw plugs supplied Feedback connection G¼ Temperature range 0 to 60 / 3 F to 140 F Material ody: zinc die-casting Spring cage: zinc die-casting Elastomer: FKM value rate thread range number D Regulator with external feedback supply pressure max. 16 bar, relieving, with air consumption R , G¼ R ,00 G¼, max. 16 bar 40 l/min R18 ccessories pressure Ø 63 mm, 0 10 bar, G¼ M ,50 mounting bracket made of steel W ,00 mounting nut made of brass M0x1,5M 5,00 P1 0 pilot air feedback signal panel cut-out main flow P1 P Example: combination with booster feedback signal 58 Ø9 18 R18 inlet outlet 45 W00-36 Order exampel: R

5 Midi Pressure Regulator R10 / R11 Supply pressure djustment value rate thread range number Midi pressure regulator ll-purpose, high-performance, diaphragm regulator with high flow. max. 1 bar R10: by plastic knob with snap-lock R11: by T-handle with locknut G¼ on both sides of the body, screw plug supplied Temperature range R10: 0 to 50 / 3 F to 1 F R11: 0 to 70 / 3 F to 158 F, for appropriately conditioned compr. air down to -30 / - F Material ody: zinc die-cast Spring cage: glass fibre-reinforced plastic at R10, zinc die-cast at R11 Elastomer: NR/una-N, optionally FKM Inner valve: brass, optionally stainless steel supply pressure max. 1 bar, relieving, without pressure R G¼ R , R , R , R10-0D 93, G R , R , R , R10-03D 93, G½ R , R , R , R10-04D 93,00 G 1 4 up to G½ R10 with knob, accesssory: Special options, add the appropriate letter T-handle including locknut R o. Mehrpr. NPT connection thread R N +10,00 non-relieving without relieving function R K +,50 FKM elastomer inner parts made of brass R X64 +48,00 inner parts made of stainless steel R X ,00 ccessories pressure Ø 50 mm, 0 * bar, G 1 4 up to 10 bar M500-..* 9,50 Ø 50 mm, 0 5 bar, G 1 4 up to 5 bar M ,00 mounting bracket made of steel W ,00 mounting nut made of plastic M45x1,5K 3,00 made of aluminium M45x1,5 6,00 R11 with T-handle, inlet outlet G¼ G¼ R10 R11 W45-01 * 0 = 0.5 bar, 04 = bar, 10 = 0 10 bar, 5 = 0 5 bar R

6 Pressure Regulator R119 High-capacity diaphragm regulator of solid design suitable for many applications. Ideal for installations where constant line pressure at wide flow variations. From size G on it is a pilot-operated piston regulator with an excellent regulation characteristic curve. Supply pressure max. 1 bar ir consumption from size G on the regulator s air consumption is about 0.1 l/min. djustment by T-handle with locknut from size G on by plastic knob with snap-lock on the pilot regulator up to size G½ optionally by handwheel for control panel integration G¼ on both sides of the body, screw plugs supplied Temperature range 0 to 50 / 3 F to 1 F, for appropriately conditioned compressed air down to -30 / - F Material ody: zinc die-cast Inner valve: brass Diaphragm: NR/una-N ottom screw: reinforced nylon value rate thread range number pressure regulator R119 supply pressure max. 1 bar, relieving, without pressure G¼ R , R , R , R119-0D 85, G R , R , R , R119-03D 85, G½ R , R , R , R119-04D 100, G¾ R , R119-06D 178, G R , R119-08D 178,00 G 1 4 up to G3 R R119-04P for panel mounting, 11 5 W00- G¼ inlet outlet R W00-3 R R

7 Pressure Regulator R119 High-capacity diaphragm regulator of solid design suitable for many applications. Ideal for installations where constant line pressure at wide flow variations. From size G on it is a pilot-operated piston regulator with an excellent regulation characteristic curve. Supply pressure max. 1 bar ir consumption from size G on the regulator s air consumption is about 0.1 l/min. djustment by T-handle with locknut from size G on by plastic knob with snap-lock on the pilot regulator up to size G½ optionally by handwheel for control panel integration G¼ on both sides of the body, screw plugs supplied Temperature range 0 to 50 / 3 F to 1 F, for appropriately conditioned compressed air down to -30 / - F Material ody: zinc die-cast Inner valve: brass Diaphragm: NR/una-N ottom screw: reinforced nylon value rate thread range number pressure regulator supply pressure max. 1 bar, relieving, without pressure R G1½ R , R119-1D 88, G R , R , R , R119-16D 1100, G½ R , R , R , R119-0D 1100, G R , R , R , R119-4D 350,00 G 1 4 up to G3 R119-1 Special options, add the appropriate letter NPT connection thread R N +10,00 non-relieving without relieving function for G¼ to G½ R K +,50 for G3 R119-4.K + 5,00 FKM elastomer for G¼ to G1½ R X ,00 for G3 R119-4.X ,00 panel mounting with handwheel, hole diameter 16 mm for G¼ to G½ R P +5,00 flange connection see chapter SST devices / flanges R F. s. Kap.15 PWIS-free for painting plants R L auf nfr. R ccessories pressure Ø 50 mm, 0 * bar, G¼ for G¼ to G½ M500-..* 9,50 Ø 63 mm, 0 * bar, G¼ for G¾ to G½ M630-..* 10,50 mounting bracket made of steel for G¼ and G 3 8 W00-13,50 for G½ W ,50 for G¾ to G1½ W ,00 R119-16F1 G¼ inlet outlet R119-16/-0 W00-4 * 0 = 0.5 bar, 04 = bar, 06 = bar, 10 = 0 10 bar, 16 = 0 16 bar R

8 Pressure Regulator Series D up to 30 bar RD1 RD4 Good value pressure regulator of solid design. RD1 and RD3 are equipped with diaphragms, RD4 is piston-operated. Wall mounting through two drilled holes in the bodies of RD1 to RD3. Supply pressure max. 30 bar djustment RD1/RD: by plastic knob with snap-lock RD3: by handwheel RD4: by T-handle G¼ on both sides of the body, G 1 8 at RD1 Temperature range -10 to 50 / 14 F to 1 F for RD1, RD and RD4-0 to 60 / -4 F to 140 F for RD3 Material ody: zinc die-cast at RD1, aluminium at RD, RD3 and RD4 Spring cage: plastic reinforced with glass fibre at RD1, nylon at RD, aluminium at RD3/RD4 Elastomer: NR/una-N Inner valve: brass Dimensions Kv- Flow P1 onnection Pressure Order Preis value rate max. thread range number mm mm mm (m ³ /h) m ³ /h* 1 l/min* 1 bar G bar Pressure regulator supply pressure max. 0 / 30 bar, relieving, without pressure RD1...RD G RD1-01 9, RD1-01 9, RD1-01D 9, RD1-01E 9, G¼ RD1-0 9, RD1-0 9, RD1-0D 9, RD1-0E 9, G RD-03 75, RD-03 75, RD-03D 75, RD-03E 75, G½ RD-04 75, RD-04 75, RD-04D 75, RD-04E 75, G¾ RD , RD , RD3-06D 430, RD3-06E 430, G RD , RD , RD3-08D 430, RD3-08E 430, G1¼ RD , RD , RD3-10D 650, RD3-10E 650, G1½ RD , RD , RD3-1D 650, RD3-1E 650,00 series D Ø E M RD M30x1,5 RD M50x1,5 RD RD G 1 4 up to G RD1 RD RD3-06/-08 G 1 4 G 1 8 at RD.-01 inlet outlet RD1 / RD RD3 * 0 = 0.5 bar, 04 = bar, 10 = 0 10 bar, 16 = 0 16 bar RD

9 Pressure Regulator Series D up to 30 bar RD1 RD4 Good value pressure regulator of solid design. RD1 and RD3 are equipped with diaphragms, RD4 is piston-operated. Wall mounting through two drilled holes in the bodies of RD1 to RD3. Supply pressure max. 30 bar djustment RD1/RD: by plastic knob with snap-lock RD3: by handwheel RD4: by T-handle G¼ on both sides of the body, G 1 8 at RD1 Temperature range -10 to 50 / 14 F to 1 F for RD1, RD and RD4-0 to 60 / -4 F to 140 F for RD3 Material ody: zinc die-cast at RD1, aluminium at RD, RD3 and RD4 Spring cage: plastic reinforced with glass fibre at RD1, nylon at RD, aluminium at RD3/RD4 Elastomer: NR/una-N Inner valve: brass Dimensions Kv- Flow P1 onnection Pressure Order Preis value rate max. thread range number mm mm mm (m ³ /h) m ³ /h* 1 l/min* 1 bar G bar Pressure regulator supply pressure max. 0 / 30 bar, relieving, without pressure RD1...RD G1½ RD , RD , RD4-1D 875, RD4-1E 875, G RD , RD , RD4-16D 875, RD4-16E 875,00 G 1 4 up to G RD4 Ø Special options, add the appropriate letter non-relieving without relieving function RD.-...K +5% 30 bar operating pressure RD.-...H +100% ccessories pressure Ø 40 mm, 0 * bar, G 1 8 for RD1 M * 9,50 Ø 50 mm, 0 * bar, G 1 4 for RD M500-..* 9,50 Ø 63 mm, 0 * bar, G¼ for RD3 and RD4 M630-..* 10,50 mounting bracket made of steel for RD1 W30-0 9,00 mounting nut made of plastic for RD1 M30x1,5K,00 mounting bracket made of steel for RD W ,00 mounting nut made of plastic for RD M50x1,5K 3,00 mounting bracket made of steel for RD3 W , W Ø10 57 W series D Ø E M RD M30x1,5 RD M50x1,5 RD RD W00-06 RD4 * 0 = 0.5 bar, 04 = bar, 10 = 0 10 bar, 16 = 0 16 bar RD4-1.09

10 Pressure Regulator for attery with Joint Supply R / R035 Diaphragm pressure regulator, with joint pressure supply. Modular assembly without need for double nipples or other fittings. Outlet at rear side, port in the front. Supply pressure max. 16 bar, max. 10 bar for R035 ir consumption without constant bleed djustment by plastic knob with snap-lock, R035 without snap-lock G 1 8 at R035 and R-0, G¼ at all others Temperature range 0 to 50 / 3 F to 1 F Material ody: zinc die-cast, POM at R035 djusting knob: plastic Elastomer: NR/una-N Inner valve: brass Thread insert: brass at R035 splitting value rate thread range number mm Pressure regulator G 1 8 0,1 6 R035-01R 0, G¼ R-0 4, R-0 4, R-0D 4, G¼ R- 44, R- 44, R-D 44, R-E 44, G R-03 5, R-03 5, R-03D 5, R-03E 5, G½ R-04 68, R-04 68, R-04D 68, R-04E 68,00 ccessories supply pressure max. 16 bar, relieving Series R035 max. 10 bar, without pressure R / R035 pressure Ø 3 mm, 0 * bar, G 1 8 for R-0 / R035 M301-..* 11,00 Ø 40 mm, 0 * bar, G 1 4, connection parts required for R- M * 9,50 Ø 50 mm, 0 * bar, G 1 4 for R-03 / R-04 M * 9,50 connection parts adapter for M4001, G 1 4m to G 1 8f VI-001,00 mounting bracket made of steel for R-0 / R- W30-0 9,00 mounting nut made of plastic for R-0 / R- M30x1,5K,00 mounting bracket made of steel for R-03 W00-5 9,00 mounting nut made of plastic for R-03 M4x1,5K 3,00 mounting bracket made of steel for R-04 W ,00 mounting nut made of plastic for R-04 M50x1,5K 3,00 connection clips made of plastic for R ,50 connector kit for R-0 KP00,50 for R-03 KP,50 for R- KP11,50 for R-04 KP33,50 G 1 8 up to G½ joint supply battery block R035 battery block R F partition partition partition Ø ØE D P 1 P P P 3 P 4 W W Ø10 13 series D Ø E F R KP00 R R * 04 = 0 4 bar, 06 = bar, 10 = 0 10 bar, 16 = 0 16 bar KP11 KP W50-03 R035-01R.10

11 Gauge Pressure Regulator RM djustment Relieving function Diaphragm-operated pressure regulator with integrated in the handwheel. The regulator is user-friendly and saves on space for a in panel. Knob with integrated. The RM1 regulator has a tamper-proof knob with snap-lock. relieving as standard Supply pressure RM1: max. 16 bar RM: max. 5 bar Pressure RM1: scale in bar RM: scale in bar and psi readable down to 3 bar for 10/16 bar range Temperature range RM1: 10 to 60 / 14 F to 140 F RM: 10 to 90 / 14 F to 190 F Material RM1: body: zinc die-cast RM: body: zinc die-cast and aluminium elastomer: NR/una-N elastomer: NR/una-N value rate thread range number Pressure regulator, P1 max. 16 bar including nut, range approx. 30% above pressure range RM G¼ RM1-0 88, RM1-0 88, RM1-0 88, G RM , RM , RM ,00 G¼ and G 3 8 RM1 Pressure regulator, P1 max. 5 bar including nut, range approx. 30% above pressure range RM G¼ RM-0 165, RM-0 165, RM-0 165, RM-0D 165, G RM , RM , RM , RM-03D 165,00 RM port for control panel panel cut out * 1 at 7 bar supply pressure, 6 bar outlet pressure and 1 bar pressure drop RM1-0.11

12 70 djustment Dial Pressure Regulator, lockable R11 R41 Piston-operated regulator with balanced valve design and high-relief flow. Features include a transparent pressure-calibrated, non-rising adjusting dial which can be mounted in any position so the dial face is always visible. Pressure setting in steps is possible. compressed air Supply pressure max. 1 bar, minimum 1 bar above outlet pressure ir consumption R1/R31/R41: max. 1.4 l/min depending on outlet pressure R11: without constant bleed djustment The full secondary pressure range can be dialed in less than a 70 turn proportional to handwheel with scale in bar or psi. This is advantageous if secondary pressure must be changed frequently. Relieving function relieving G¼ on both sides of the body, not available at R11 Temperature range 0 to 65 / 3 F to 149 F Material ody: zinc die-cast Piston: acetal O-ring: NR/una-N Valve seat: acetal, brass and NR/una-N value rate thread range number djustment dial regulator supply pressure max. 1 bar, relieving, with constant bleed, adjusting dial 70 turn wheel R11 R G¼ 0 3 R11--L 150, R11--O 150, G¼ 0 3 R1--L 150, R1--O 150, G R1-3-L 150, R1-3-O 150, G½ 0 3 R1-4-L 150, R1-4-O 150, G¾ 0 3 R31-6-L 40, R31-6-O 40, G1 0 3 R31-8-L 40, R31-8-O 40, G1½ 0 3 R41--L 430, R41--O 430, G 0 3 R41--L 430, R41--O 430,00 G 1 4 up to G fast adjustment R1 R31 Special options, add the appropriate letter adjustment lock RRP R T +6,00 ccessories pressure Ø 50 mm, 0 * bar, G¼ for R1 to R41 M500-..* 9,50 mounting bracket mounting through the port at the back for R1 to R41 RRP ,00 R41 adjusting knob R¼ cam disc limits either: maximum pressure, minimum pressure or adjustment range between maximum and minimum 35 Ø 6.5 upper piston lower piston spring outlet 7 inlet R11 R41 adjustment lock RRP mounting bracket RRP valve seat retaining spring * 04 = 0 4 bar, 16 = 0 16 bar R11--L.1